So I was running ICS with success until I was told by my provider that they were gonna do some PRL updates on my phone. Had to revert to stock before they could update it.
Anyways, so i reverted and they updated. I was at Froyo Release then tried flashing Teamhacksung ICS Build 10 with Glitch v14 and data did not work whatsoever.
Flashed back to froyo. Can anyone help me out?
leonvx671 said:
So I was running ICS with success until I was told by my provider that they were gonna do some PRL updates on my phone. Had to revert to stock before they could update it.
Anyways, so i reverted and they updated. I was at Froyo Release then tried flashing Teamhacksung ICS Build 10 with Glitch v14 and data did not work whatsoever.
Flashed back to froyo. Can anyone help me out?
Click to expand...
Click to collapse
odin back to stock eh03 and start fresh.
I did without success.
Flashed official EH03
Turned On
Turned Off
Flashed CWMALL
Booted into CWM
Flashed Teamhacksung BUILD 10
Auto booted
Data fail (3G appears on and off on the top but with no data able to connect)
leonvx671 said:
I did without success.
Flashed official EH03
Turned On
Turned Off
Flashed CWMALL
Booted into CWM
Flashed Teamhacksung BUILD 10
Auto booted
Data fail (3G appears on and off on the top but with no data able to connect)
Click to expand...
Click to collapse
please refer to section4 of my guide in the general section....your method is flawed.
Alright I found your guide droidstyle and attempted to follow your guide with Build 1 to start after stock EH03, but it came across the same result again. I'll attempt with build 2 when i can.
leonvx671 said:
Alright I found your guide droidstyle and attempted to follow your guide with Build 1 to start after stock EH03, but it came across the same result again. I'll attempt with build 2 when i can.
Click to expand...
Click to collapse
make sure your using cwm4 fixed for mtd and not cwmall....
Yes i made sure I dled the cwm on your guide. Will make time to work on retrying it soon.
Will there be a difference if I PDA eh03_full_odin.tar.md5 as opposed to CI500_VZW_EH03_GB_CM.tar.md5?
Ok so i have followed droidstyle's guide to key and I still can't get Data to work on THS ICS...
Maybe i can somehow help it with that hidden menu with data settings?
Some info to add is im not in the continental US and not under the Verizon Carrier.
You may need to change your apns to whatever works for you. These builds have only been made for 3 carriers. If you are not on one of those, it doesn't surprise me that it doesn't work, why would it. I would suggest giving people a little more info so they can help you. I don't know what they need to be changed to but if you would reveal the rest of the information I am sure there has to be someone out there who knows what to change them to. I am not sure if it is as simple as getting your apns before you flash all this, and then changing them back to those after flashing.
Sent from my SCH-I500 using Tapatalk
Related
Been looking for a solution for the past 12 hours and have not found any.
Bought a stock i777 with 2.3.4, flashed with SGH-I777_ClockworkMod-Recovery_5.0.2.3 and a stock 2.3.5 AT&T ROM. After ANY kernel is flashed, I seem to lose WiFi capability. I have 5 wireless points near my house and it just gets stuck on "Scanning" and then the WiFi turns off. No points are even listed!
Currently running CW 5.0.2.3 kernel, 2.3.5 AT&T stock ROM, UCKJ1 baseband, kernel 2.6.35.7.
TL-DR - Flashed and lost wifi ability.
Which 2.3.5 ATT stock rom is this that you're referring to? Have a link to where you got it from?
I believe I got it from here: androidadvices.com/update-samsung-galaxy-s2-i777-gingerbread-235-firmware/
Did it work initially when you went to 2.3.5? You said you've tried some different kernels, at what point did you notice the wifi broke?
I even reflashed using kernel + non-rooted system package located in this thread: http://forum.xda-developers.com/showthread.php?t=1286432
Still no WiFi showing. Just says "scanning" then the wifi shuts off.
Update: Flashed Entropy512's stock package + nonrooted with no luck. No wifi. Flashed zetamax kernel after. Still no wifi.
Showed at that time: version 2.3.4, 1777UCKH7 baseband, 2.6.35.7_ZedomaxStockKernel.
Flashed again with a I777UCKJ1 2.3.5 ODIN package that I know will fix the WiFi. It shows version 2.3.5, 1777UCKJ1 baseband, 2.6.35.7 kernel.
Seems like if I flash ANYTHING else besides this the wifi stops working on me.
Solved problems for myself.
Completely unrooted, reflashed ATTGalaxyS2Unroot_SGH-i777.tar. This brought me back to the original AT&T firmware that came with the phone. I then flashed SGH-I777_ClockworkMod-Recovery_5.0.2.3.tar and subsequently used SuperOneClick 2.2 to root.
WiFi seems to be working fine now. I am now running a stock 2.3.4 ROM, UCKJ1, kernel 2.6.35.7...Clockworks version.
If anyone else is having the same issue this should help.
Thanks for the updates. Sounds like a frustrating battle. Glad all is well.
Sent from my páhhōniē
rpesta said:
Solved problems for myself.
Completely unrooted, reflashed ATTGalaxyS2Unroot_SGH-i777.tar. This brought me back to the original AT&T firmware that came with the phone. I then flashed SGH-I777_ClockworkMod-Recovery_5.0.2.3.tar and subsequently used SuperOneClick 2.2 to root.
WiFi seems to be working fine now. I am now running a stock 2.3.4 ROM, UCKJ1, kernel 2.6.35.7...Clockworks version.
If anyone else is having the same issue this should help.
Click to expand...
Click to collapse
Hrrrrm Having the same issues and the only way I could manage wifi to get back on was going to 2.3.5 which had it's own set of issues. I tried following your steps but one thing I noticed you said you were running UCKJ1 but isn't that 2.3.5? When I flash the exact same files I am still stuck without working wifi
Still noobing it up here - hopefully I can either stumble upon a fix like you did or spot someone else's that matches my issues...
Avoid that androidadvices.com **** - Half the time they link to firmware that isn't even for the device it claims it is, carrying a high risk of a hardbrick.
I only experienced this when I was trying to upgrade kernels using the SHOstock ROM. I get no wifi with siyah and can't send MMS with Entropy's kernel. That's the only time I've had those issues. Maybe you had a bad download? Glad you got it fixed though.
Just to clarify, those kernels work great with most other ROMS I've tried them on.
Sent from my SAMSUNG-SGH-I777 using XDA App
Had the same problem
I had this problem (with wifi, not mms) after rooting from 2.3.6. I eventually flashed Zedomax's kernel using mobile odin and wifi functionality was restored.
I still haven't moved on from there, but probably will sometime this week.
Jank4AU said:
I only experienced this when I was trying to upgrade kernels using the SHOstock ROM. I get no wifi with siyah and can't send MMS with Entropy's kernel. That's the only time I've had those issues. Maybe you had a bad download? Glad you got it fixed though.
Just to clarify, those kernels work great with most other ROMS I've tried them on.
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
Weird, I cannot think of anything that would cause MMS to fail - what sort of errors?
It's happened to me several times after I flash a kernel. when I attempt to send an mms it just hangs and says sending but it never goes out. Could it be a conflict as I have Chomp set as my primary messaging app? Although if that were the case it should be able to send from one or the other but it doesn't. Can't remember for sure but I believe that I may have flashed the kernel cleaning script beforehand in each instance. The only way I've been able to fix it is to reinstall everything starting with the ROM. I'm sure it's user error.
As info, steps I took to try to fix before I restored:
1) reflash kernel
2) flash radio again
3) tried all 5 radios released (not a radio problem I'm guessing)
4) wipe dalvik and reflash kernel
5) run kernel cleaning script and reflash kernel
No dice, it was bizarre. Is this even the sort of event that you could get an error log from? There was no FC or any error message, you know? If it happens again what can I provide you that would help...can I do a logcat or whatever? ;-)
By the way,I could receive mms, just not send.
Sent from my SAMSUNG-SGH-I777 using XDA App
I have no wifi but I'm looking for the ATTGalaxyS2Unroot_SGH-i777.tar and I can't find any link, can you point me there? thanks
AMATHEU said:
I have no wifi but I'm looking for the ATTGalaxyS2Unroot_SGH-i777.tar and I can't find any link, can you point me there? thanks
Click to expand...
Click to collapse
Here you go. It is a sticky in the development threads
http://forum.xda-developers.com/showthread.php?t=1286432
AMATHEU said:
I have no wifi but I'm looking for the ATTGalaxyS2Unroot_SGH-i777.tar and I can't find any link, can you point me there? thanks
Click to expand...
Click to collapse
galaxys2root.com's kangs are not supported here...
A proper supported package was linked in the post above.
Factory Data Reset restored wi-fi
I was on UCKK6 (2.3.6) and rooted by flashing Entropy512's Return/Unbrick to Stock (2c)
http://forum.xda-developers.com/showthread.php?p=18576627
and lost wi-fi (scanning then wi-fi shuts off).
Since I was reverting from UCKK6 back to UCKH7, I had to do a factory data reset
(Menu > Settings > Privacy > Factory Data Reset)
based on the info in this thread:
http://forum.xda-developers.com/showthread.php?t=1286432
I got wi-fi back once I did the Factory Data Reset.
I'm having the same problem
Giant noob here =(
Could someone post step by step instructions on how to unroot so that I can restore my wifi?
For example, if in fact doing the factory data reset as described in the post above me is the correct course of action... is there a way to do a backup before so that I do not lose all my apps and stuff?
Thanks
RocketOptics said:
I was on UCKK6 (2.3.6) and rooted by flashing Entropy512's Return/Unbrick to Stock (2c)
http://forum.xda-developers.com/showthread.php?p=18576627
and lost wi-fi (scanning then wi-fi shuts off).
Since I was reverting from UCKK6 back to UCKH7, I had to do a factory data reset
(Menu > Settings > Privacy > Factory Data Reset)
based on the info in this thread:
http://forum.xda-developers.com/showthread.php?t=1286432
I got wi-fi back once I did the Factory Data Reset.
Click to expand...
Click to collapse
Was having problem with WiFi on my T-Mobile SGS2 where it was seem like it was turning on, then try to start scanning for networks then would automatically turn off...I was pulling me hair out reflashing it with different ROMs, and Radios, and doing a "Factory Data Reset" from inside the main Settings screen fixed the problem...thanks a lot guy!
So, xda won't let me post this in the actual ROM post, but I was wondering if anybody else was having this issue (or new a work around). After installing the ICS Passion V4 ROM, I've completely lost all service (says emergency calls only in the notification tray).
I tried manually setting a couple things in network settings but nothing worked. I eventually flashed back to Froyo with odin and all is well (so it's not a hardware issue).
Any suggestions?
after flashing passion look in setting - about phone and see what's listed under baseband. It should be T959UVKB5. If it says unknown you need to flash the KB5 modem that is in the OP.
Ahh, duh! Now that you say that I remember reading that exact thing and making a mental note to try that if I run into problems.
Thank you so much! I'll have to give that a try when I get home tonight, I'll update if it works.
Yup, that fixed it. Thank you!
Now i have that problem
i have no service either and i did flash the KB5 modem. not sure if im doing anything else wrong. my baseband says unknown and and its been the same when i had cm7 running.
any help??
I did a complete wipe of my fascinate (on a Powerwashed 2.2 rom). I then installed TeamHacksung Build 2 (as advised by the AOKP folks). I then flashed AOKP build 37 (glitched).
Everything works great, except my phone seems to cut out a few seconds (or minutes) into a call. I can no longer hear the person or they can't hear me, even though the call is still connected. Do I need to flash a new radio? Or did I need to wipe after installing the TeamHacksung rom before flashing AOKP? I assumed since I wiped the Powerwashed 2.2 rom that my phone was ready to go.
martyxng said:
Or did I need to wipe after installing the TeamHacksung rom before flashing AOKP?
Click to expand...
Click to collapse
Yes. From Droidstyle's guide...
Step 22: Long press power key, select reboot, select recovery, WIPE DATA, Install ICS zip from sd that you downloaded in step 20. then Install gapps zip from sd that you downloaded in step 21, Reboot!
Okay, I've wiped the phone about 5 times now following all directions and most of my calls still go silent 10 seconds in or so.....BAD NEWS!
I need to fix this ASAP! Should I go back to the last "milestone" build of AOKP, or are there other troubleshooting steps I can take?
have you started completely from scratch by going back to stock gingerbread, and followed all the instructions to the letter in the guide? What rom were you on before and did you have the same issue? Try another GB rom then try a different ics rom.
sent from the future via frozen donkey wheel
lpt2569 said:
have you started completely from scratch by going back to stock gingerbread, and followed all the instructions to the letter in the guide? What rom were you on before and did you have the same issue? Try another GB rom then try a different ics rom.
sent from the future via frozen donkey wheel
Click to expand...
Click to collapse
I was never on the stock GB rom. I went from stock Froyo to Powerwashed Froyo. I flashed a few different radios because I kept missing calls. I ended up on EC09.
Then I did the TeamHacksung -> AOKP 37 update. It looks like I am now on radio EC09 in AOKP 37. Would going to stock GB and then back really make a difference? Or should I try a different radio? Do I still need to flash radios through ODIN when I'm on an ICS build?
The ROMs do not include a radio. EC09 is what most people have the best luck with. Its also what I'm using with ICS. I'm running THS though, never have cared for AOKP, personal preference.
I have the least amount.of trouble flashing back to stock (personally use ED05), then going to whatever ROM want to run.
Have you tried switching to a different kernel?
You can flash whatever radio you want. There is a whole section here with all of the radio downloads. It is not really fair to say that most people use a certain radio as that is not true. People use the radio that works best for them. Try some of them out for yourself. I am using the ei20 radio if I recall and have non issues with that one.
Sent from my SCH-I500 using Tapatalk
martyxng said:
Then I did the TeamHacksung -> AOKP 37 update. It looks like I am now on radio EC09 in AOKP 37. Would going to stock GB and then back really make a difference? Or should I try a different radio? Do I still need to flash radios through ODIN when I'm on an ICS build?
Click to expand...
Click to collapse
So you went directly from a Froyo ROM to an ICS ROM without following the proper steps to get to ICS? That's definitely a no-no. You really should just follow all of the steps in droidstyle's guide for flashing an ICS ROM. I can almost guarantee you will see your issue with calls go away if you follow every step. It sounds like you are jumping all over the place and not starting at the beginning. That is just asking for issues.
Ever since I got a PRL update from my carrier, I have had no luck whatsoever with having data on any of the ROMs I tried flashing which include CM7 Nightlies and THS ICS. Even after following droidstyle's guide to key no luck. Anyone have any info as to just how important PRL updates are or what their connection is to my problem? Thanks.
normally the sd card is the culprit for issues with flashing cm7 & cm9 based roms... especially if your getting cant mount errors.
Would you recommend I try clearing my SD card of everything besides the ROM itself before installing? And would it somehow lead to broken data?
Could have been when your prl updated it updated something else along the way. Or just doesnt happen to work with your phone. For example i flashed a galaxy s and had to use a paygo prl as the latest i had on my phone wouldnt work for it. Its def a possibility that something with that update caused ill effects.
What exactly have you tried? Flash back to stock ? Data doesnt work still with new prl? ?
Yup...pretty much droidstyle's guide word for word as far as flashing back to stock and installing CM7 or CM9/ICS.
I looked up something that flashes through CWM called alt carrier data fix...apparently for cricket users...thought it would help for my phone...from the flashing on/off 3g it just basically went dead...so that didn't work...
Hey guys, I'm not new to rooting or flashing ROM's but I've encountered some issues. Basically, I was on an early JB Rom and everything was working fine but it mostly was in roaming and would go from 2-4 signal bars.
I backed up and have attempted to flash:
PACman
MIUI 2.11.23
As well as CM10 by joker and AOKP CM 10.
Every flash I end up with no signal bars and no roaming, also following all install instructions in the threads.
I have tried flashing with and without prop tweak, i have even restored the backup all with the same results:
Empty signal bars, occasional R for roaming, every call says mobile network unavailable.
I have also fixed permissions, and have tried to flash via TH3Bill CWM and TWRP recovery... what am I doing wrong? The backup isin't even working!
I wouldn't know off hand, but here's something you can try while waiting for a more professional member to come to the rescue.
System Settings> More>Mobile Networks>System select>Home only
What's your current PRL, APNs?
if it was me I'd sbf back to stock and see if I had signal then go back and try a custom rom again
foxsdaddy67 said:
if it was me I'd sbf back to stock and see if I had signal then go back and try a custom rom again
Click to expand...
Click to collapse
Before sbf'ing if you have a back up of your stock ROM or any ROM that has the update profile/prl setting in it, restore that back up and try updating your profile/prl then wipe/flash your new ROM.
I usually have this problem when I switch back to my Photon from my ET4G, but updating the profile usually does the trick.
When I restored my old backup, I had the same problem. The only fix I could find was on MIUI and selecting automatic netowrk before flashing options chooser. Any other rom would make no changes on automatic or home only. I am going to try a fresh install and if no luck will sbf today. I'll keep you guys posted.
Thanks!
**EDIT** Does it matter if I use Th3Bill's CWM recovery or TWRP? I have tried both with similar results. I jut noticed CWM is usually posted with the ROM builds... does it makes a difference? If so, what should I use?
Normally both work just fine, as long as you're using one of those two
I spent too much time flashing roms and wondering why they wouldn't work right, when I was using the stock CWM
I think It's just my opinion but I have preference for bill's cwm
Having this exact same problem. Did anyone figure it out?
No Radio/Signal
I recently flashed the latest MIUI.US V5 3.4.5 for the Photon provided by Th3Bill. I am familiar with the process of applying ROMs. I tried to go back to Beanstalk, JB, and ICS and could not recover the radio signal. I even restored a few backups with the same result, no signal. I flashed the MIUI V5 3.4.5 ROM back to the Photon and it worked flawlessly. Can anyone please help? I would really like to get off the MIUI ROM, it does not appeal to me like the standard versions of Jelly Bean that Th3Bill has produced.