few questions - Galaxy S II Q&A, Help & Troubleshooting

hi
i m new to s2 but i was using nexus s before
now i have few questions please clear my doubts
1.for now my phone is not rooded if i install a custom kernel with odin will the phone be rooted if that rom has root?
2.for now my phone is not rooded if i install a custom rom with odin will the phone be rooted if that rom has root?
thank you

Flash a ChainFire kernel using odin (follow the links in my signature). Try and keep it close to your current rom / kernel number. Its all in the instructions on their page.
Then flash your new roms either through recovery (follow links in my signature) or using odin.

ancilary said:
hi
i m new to s2 but i was using nexus s before
now i have few questions please clear my doubts
1.for now my phone is not rooded if i install a custom kernel with odin will the phone be rooted if that rom has root?
2.for now my phone is not rooded if i install a custom rom with odin will the phone be rooted if that rom has root?
thank you
Click to expand...
Click to collapse
when you flash a costum ics kernel for cm9 like fluxi, you have root!

for now my rom is official s2 rom for 2.3.6
and in cf-root thread the kernel required for my version is untested
what to do?
can i just flash rooted custom kernel via odin?
and does odin require kies to be installed?

ancilary said:
hi
i m new to s2 but i was using nexus s before
now i have few questions please clear my doubts
1.for now my phone is not rooded if i install a custom kernel with odin will the phone be rooted if that rom has root?
YES if the custom kernel is rooted .
2.for now my phone is not rooded if i install a custom rom with odin will the phone be rooted if that rom has root?
Yes but CWM is normal custom install .
and in cf-root thread the kernel required for my version is untested
what to do? MAKE A DECISION developer does not have time to test every build .
can i just flash rooted custom kernel via odin?
Only if custom kernel is Odin flash most/all are CWM.
and does odin require kies to be installed?
YES or at least Samsung USB Drivers .
Read the basics .
FAQ
http://forum.xda-developers.com/showthread.php?t=1065995
NEW HERE
http://forum.xda-developers.com/showthread.php?t=1134290
bible
http://forum.xda-developers.com/showthread.php?t=1473577
Guide
http://forum.xda-developers.com/showthread.php?t=1125282
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
Click to expand...
Click to collapse

thank you
i rooted using chroot and its working perfectly fine and used samsung usb drivers
can u suggest me some best avalialbe roms?

ancilary said:
thank you
i rooted using chroot and its working perfectly fine and used samsung usb drivers
can u suggest me some best avalialbe roms?
Click to expand...
Click to collapse
read this rule : http://forum.xda-developers.com/showthread.php?t=1612881
and pick the one best for you from here : http://forum.xda-developers.com/forumdisplay.php?f=1058

tht were the best suggetions u got frm aboue frnds.....well there is no best rom,kernel we all are flashaholic(atleast me lol) but if u pm me wat r ur likes i can suggest some, but remember all roms of devs r best an its owr personnel choice tht we make on owr fones

Related

Some GT-I9100G Questions

Hi
Im kinda new here I have a Galaxy S2 GT-I9100G
Android version 2.3.6
Baseband : I9100GDZKK1
Kernel :2.6.35.7 [email protected] #2
build no :GINGERBREAD.JPKK1
after searching the forums i found two custom ROMS for my phone but both for the kernel DZKJ2 which is also for android 2.3.6.
i have few questions
- what is the best methods for rooting this device and how do i install CWM recovery for the G version ?
- after installing CWM can i install the custom ROM directly or i need to install custom kernel first... and will that custom kernel ruin my phones stock ROM ?
Thanks ...
thunderbird815 said:
Hi
after searching the forums i found two custom ROMS for my phone but both for the kernel DZKJ2 which is also for android 2.3.6.
i have few questions
-
- after installing CWM can i install the custom ROM
You follow the instruction thats as simple as it is .
directly or i need to install custom kernel first... and will that custom kernel ruin my phones stock ROM ?
Does not make sense you need to read the FAQS and GUIDES
A custom kernel will no longer be a stock kernel .
jje
Click to expand...
Click to collapse
Thanx jje. but i need to root the device first and install CWM in order to install the ROM.. and i have searched alot there is no method to root tne new DZKK1 kernel for I9100G running 2.3.6 .. i even tried DoOmlord tool for the G version with no use
thunderbird815 said:
Thanx jje. but i need to root the device first and install CWM in order to install the ROM.. and i have searched alot there is no method to root tne new DZKK1 kernel for I9100G running 2.3.6 .. i even tried DoOmlord tool for the G version with no use
Click to expand...
Click to collapse
check this forum for I9100G rooting.
forum.lowyat.net/index.php?showtopic=2068824
-sayan- said:
check this forum for I9100G rooting.
forum.lowyat.net/index.php?showtopic=2068824
Click to expand...
Click to collapse
Thanx.. already tried that, this method wont work for the latest kernel but after reserching it apeares that if i Load the RAM for more that 500 MB it will. so i did that and now im happy ...phone rooted ,CWM installed custom kernel installed, now im looking for a nice custom ROM.
Thank u all for the efforts.
thunderbird815 said:
Thanx jje. but i need to root the device first and install CWM in order to install the ROM.. and i have searched alot there is no method to root tne new DZKK1 kernel for I9100G running 2.3.6 .. i even tried DoOmlord tool for the G version with no use
Click to expand...
Click to collapse
What version of Cwm you use for it?
how do ya install cwm
pardon me mate i too hate the same device and i rooted it using the zurgling method but it only root your phone and do not install cwm can u plz let me know how to install cwm onto my phone.
my phone specs are these..
model number .. GT-I9100G
adroid version ... 2.3.6
kernel version ..... 2.6.35.7
[email protected] #2
basebnd ...... I9100GDZKK1
build number ... GINGERBREAD.JPKK1

[Q] I want to flash a ICS ROM.. But!!

I want to install ICS ROM any of it.. But i heard i need to install a ICS kernel.. Doesnt the ROMs hav it?? Can anybody give a clear explanation?
All the roms have got kernel within the flashing package either on the official or custom roms
But I m GB so many ppl told me to flash an ICS kernel.. Is it necessary?? Only flashing the ROM is enough?/
But I m GB so many ppl told me to flash an ICS kernel
These people that tell you stuff are f9999 idiots .
Just follow the instructions for the rom .,
You would do well top read the basics .
NEW HERE
http://forum.xda-developers.com/showthread.php?t=1134290
bible
http://forum.xda-developers.com/showthread.php?t=1473577
Guide
http://forum.xda-developers.com/showthread.php?t=1125282
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
JJEgan said:
But I m GB so many ppl told me to flash an ICS kernel
These people that tell you stuff are f9999 idiots .
Just follow the instructions for the rom .,
You would do well top read the basics .
NEW HERE
http://forum.xda-developers.com/showthread.php?t=1134290
bible
http://forum.xda-developers.com/showthread.php?t=1473577
Guide
http://forum.xda-developers.com/showthread.php?t=1125282
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
Click to expand...
Click to collapse
Come on dude... I m not that much NOOBISH... But I wanted to flash a ICS ROM on GB... So do i need to install any other ICS kernels particularily?? Or just flashing is enuf rite
Told no kernel required
Either you Can flash from Odin or Cwm
May be talking about rooting kernel to get root plus CWM enabling you to flash custom ICS rom from CWM recovery
ZACQ8 said:
Told no kernel required
Either you Can flash from Odin or Cwm
May be talking about rooting kernel to get root plus CWM enabling you to flash custom ICS rom from CWM recovery
Click to expand...
Click to collapse
Na done rooting +CWM... Only installin ROMs.. thanks BTW
put the room in your internal Sd
Flash the new room
wipe Full, cash & delvick
nothing more than that
U don't need to flash ics kernal b4
Prashanthme said:
Come on dude... I m not that much NOOBISH... But I wanted to flash a ICS ROM on GB... So do i need to install any other ICS kernels particularily?? Or just flashing is enuf rite
Click to expand...
Click to collapse
Not the impression i get from your posts .
Follow the instructions is the answer you don't want to accept .
jje
JJEgan said:
Not the impression i get from your posts .
Follow the instructions is the answer you don't want to accept .
jje
Click to expand...
Click to collapse
Plus 1
you should clear up what you really want....

Change Kernel on Samsung ROM

Hi,
I've got 2 questions :
-Can i update my Samsung Rom to CM9 with :
1-boot on recovery mode
2-Load "CWM.zip", i've download on XDA
3-Load CM9.ROM.ZIP
4-Reboot
-Can i change the kernel on Samsung ROM ?
bbk said:
Hi,
I've got 2 questions :
-Can i update my Samsung Rom to CM9 with :
1-boot on recovery mode
2-Load "CWM.zip", i've download on XDA
3-Load CM9.ROM.ZIP
4-Reboot
-Can i change the kernel on Samsung ROM ?
Click to expand...
Click to collapse
in order to install CM9 rom u have to first root ur Phone using a CF-root Kernel
since Cm9 cannot be flashed with Stock recovery as it needs Custom recovery
so first root ur phone and then install CM9
My phone is already root. (with any PC )
CWM.zip is a ClockWorkMod in a ZIP to load in memory a CWM-recovery 5.X
What is a CF-Root kernel ?
bbk said:
My phone is already root. (with any PC )
CWM.zip is a ClockWorkMod in a ZIP to load in memory a CWM-recovery 5.X
What is a CF-Root kernel ?
Click to expand...
Click to collapse
CF- chain Fire-Root kernel will root ur phone and install custom recovery on ur Phone
so if ur phone is already rooted then install the CWM.zip file, then reboot into cwm recovery and install the CM9 zip file
before that in cwm recovery make a nandroid bkp of ur exsisting rom first
and also follow the instructions of flashing CM9 rom carefully form there thread OP
Thanks, i will try in 2 days
help needed
Hi
I have ICS 4.0.3 (GT-i9100BULP7 | LP8 | IML74K.BULPD), can someone tell me how to root it.
i rooted it before the update with "CF-Root-SGS2_BU_VOD_LPC-v5.4-CWM5".
After the update my mobile is unrooted
my i9100 also has the BrickBug Chip issue
bkhaliq said:
Hi
I have ICS 4.0.3 (GT-i9100BULP7 | LP8 | IML74K.BULPD), can someone tell me how to root it.
i rooted it before the update with "CF-Root-SGS2_BU_VOD_LPC-v5.4-CWM5".
After the update my mobile is unrooted
Click to expand...
Click to collapse
You root it using the same method as before, I assume via ODIN, but with an LP7 CF-Root kernel.
bkhaliq said:
Hi
I have ICS 4.0.3 (GT-i9100BULP7 | LP8 | IML74K.BULPD), can someone tell me how to root it.
i rooted it before the update with "CF-Root-SGS2_BU_VOD_LPC-v5.4-CWM5".
After the update my mobile is unrooted
Click to expand...
Click to collapse
Try flashing a PDA which has a CF-root available ( via PC-ODIN).
Then flash the CF root to gain root and CWM.
CWStJNobbs said:
You root it using the same method as before, I assume via ODIN, but with an LP7 CF-Root kernel.
Click to expand...
Click to collapse
Thanks for the effort
please tell me from where can i get the
LP7 CF-Root kernel
help needed
Hi
I have ICS 4.0.3 (GT-i9100BULP7 | LP8 | IML74K.BULPD), can someone tell me how to root it.
i rooted it before the update with "CF-Root-SGS2_BU_VOD_LPC-v5.4-CWM5".
After the update my mobile is unrooted
my i9100 also has the BrickBug Chip issue

how to return to stock recovery?

Hi everyone. I have rooted my phone with Exynosabuse and flashed CWM Recovery with ROM manager premium, then I unrooted my phone and uninstalled rom manager, but still stuck with CWM Recovery. My question is how to return to stock recovery? ( thanks in advance for any help ) also can I update my s3 via KIES while having this CWM recovery? ( notice that my phone now is unrooted )
flash stock ROM using odin
one more question
XeactorZ said:
flash stock ROM using odin
Click to expand...
Click to collapse
Thanks
But one more request, can u get me a link for leaked official 4.1.2 jelly bean rom for s3? I will be very thankful if u fetched my one.
Btw my baseband (I9300XXDLID ) if u need it.
u take recovery.img from stock rom..flash it using mobile odin...
Mostafa Wael said:
Hi everyone. I have rooted my phone with Exynosabuse and flashed CWM Recovery with ROM manager premium, then I unrooted my phone and uninstalled rom manager, but still stuck with CWM Recovery. My question is how to return to stock recovery? ( thanks in advance for any help ) also can I update my s3 via KIES while having this CWM recovery? ( notice that my phone now is unrooted )
Click to expand...
Click to collapse
Read the returning to a warranty state post .
Basics as posted multiple times are .
Run Triangle Away .
Flash stock rom
Factory reset .
jje
Wrong section, post in QA
Mostafa Wael said:
Thanks
But one more request, can u get me a link for leaked official 4.1.2 jelly bean rom for s3? I will be very thankful if u fetched my one.
Btw my baseband (I9300XXDLID ) if u need it.
Click to expand...
Click to collapse
leaked official 4.1.2 ????
just go sammobile website search and download for your country if you want
else flash any country version also okay
Just use kies, it's safer and easier...
About how much percent ODIN can fail in flashing rom to s3? Still didnt receive updates on KIES so i want to flash it via ODIN. Also how many time ddoes it take for ODIN to complete flashing??
Get the galaxy s3 toolkit. It includes odin and a copy of the stock recovery you can flash.
Flashing the recover with odin takes under a minute. Flashing a complete rom with odin takes about 5 minutes maximum.
Sent from my GT-I9300 using xda app-developers app
Mostafa Wael said:
About how much percent ODIN can fail in flashing rom to s3? Still didnt receive updates on KIES so i want to flash it via ODIN. Also how many time ddoes it take for ODIN to complete flashing??
Click to expand...
Click to collapse
0% fail if you follow the instruction
just need samsung kies (you need the usb driver, not kies because install samsung kies will automatically install the driver also)
and odin and the ROM (in .tar or .tarmd5, depends, confirm is end with .tar and put in pda
and take less than 10 minutes
flashed my s3 via mobile ODIN pro and it worked like a charm.....
Finally flashed my phone, but with mobile ODIN pro. My question is how to get the 4.2 camera on jelly bean 4.1.2 XXELKC. ? Thanx for all your help guys. ..
Flash a custom rom with the mod .
See Android Development Omega rom for one .
Or find the files and push them yourself to the custom rom .
Have a look in Themes and apps and see if its also posted as a standalone mod .
jje
Mostafa Wael said:
Hi everyone. I have rooted my phone with Exynosabuse and flashed CWM Recovery with ROM manager premium, then I unrooted my phone and uninstalled rom manager, but still stuck with CWM Recovery. My question is how to return to stock recovery? ( thanks in advance for any help ) also can I update my s3 via KIES while having this CWM recovery? ( notice that my phone now is unrooted )
Click to expand...
Click to collapse
personnaly i do it with mobile odin a choose the firm i want and remove all letting just recovery
ultimarom flashing. .
Noob question:
it's said that ultimarom can be flashed using clockworkmod recovery 6.0.1.2 or 6.0.1.9. I have 6.0.2.7. Can I Flash ultimarom using this version ? Thanks for all xda-developers members helping me
Mostafa Wael said:
Noob question:
it's said that ultimarom can be flashed using clockworkmod recovery 6.0.1.2 or 6.0.1.9. I have 6.0.2.7. Can I Flash ultimarom using this version ? Thanks for all xda-developers members helping me
Click to expand...
Click to collapse
It depends upon the instructions for that rom you need to read them .
But CWM recovery flash is the norm for most custom roms .
jje
Stock Recovery
If you just want the Stock Recovery for example for OTA, just flash the stockrecovery.tar via ODIN. Even I don't like using ODIN too much, but it's a million times better than Kies and easy to use. I personally recommend using ODIN on the PC if possible and avoid Mobile Odin. Mobile Odin is only if you don't have a PC or really need to do something on the go. It's a great app but don't use it all the time. And I'm not sure about this but I think by just flashing the Recovery you won't loose root nor Data, so you save a lot of time!
Only crappy thing with Odin is that it needs TAR and I don't know how to make those excpet with Toolbox. Does anybody know an easy way to make a flashable tar on windows without toolbox or cygwin (linux).
[
Only crappy thing with Odin is that it needs TAR and I don't know how to make those excpet with Toolbox. Does anybody know an easy way to make a flashable tar on windows without toolbox or cygwin (linux).[/QUOTE]
Probable found in the development and hacking section of xda developers forum .
jje
mega bass beat option
I've read about the "flashing mega bass beat option to s3" and it says
-- install zip from sdcard
-- chose zip from sdcard
-- wait for installation to complete
-- wipe cache partition
-- wipe dalvik cache
-- wipe fix permissions
The question is: what will happen if I didn't wipe the dalvik cache?
Do I really need to wipe it?
Glebun said:
Wrong section, post in QA
Click to expand...
Click to collapse
Then what is this? Is it some another forum?

[Q] s3 I9300 not rooting...tried all method

hello devs,
i have an international variant GT-I9300 . I upgraded it with the ATO(OPEN AUSTRIA) . After this upgrade ,i was not able to root ...i used the CF AUTO ROOT , SUPERSU , and even mobogeine root method . its getting failed....
please help me devs......i would like to root it...either to get a stable international variant ROM.
If you intend to then flash a custom rom then don't bother rooting your stock firmware, all custom roms are already rooted.
If you want to stay stock then flash a prerooted version via odin, get a link for one on xda in general forum.
boomboomer said:
If you intend to then flash a custom rom then don't bother rooting your stock firmware, all custom roms are already rooted.
If you want to stay stock then flash a prerooted version via odin, get a link for one on xda in general forum.
Click to expand...
Click to collapse
so....u mean that....i can flash a custom rom...directly from the stock recovery....without rooting...by just wiping the data and cache??? ........
or else.. sorry for asking this silly question ...i am just a newbie...
No, go read the sticky thread in general forum on how to flash custom recovery then custom rom. Factory reset before you start then back efs.
boomboomer said:
No, go read the sticky thread in general forum on how to flash custom recovery then custom rom. Factory reset before you start then back efs.
Click to expand...
Click to collapse
i checked the whole procedure of it as u told.... but while i am flashing CFROOT but it is showing "FAILED SIGNATURE VERIFICATION" . and the same thing for superSU ......
so...in case if i flash PHILZ RECOVERY or CWM ......without rooting........ will my phone get bricked ???...
Check out Cyanogenmod Installer follow the instrustion it will root and install the latest stable CM for your phone .
You are still missing basic knowledge, you can't flash anything with stock recovery.
Flashing recovery doesn't require root, but you can brick the phone if you don't understand what you are doing.

Categories

Resources