Related
I need some serious help... I think I bricked my Nextbook Premium 7. I compiled a custom ROM and forgot to included a launcher. Didn't realize it until after I flashed it. My tablet is stuck in a bootloop and only way to shut it down is with the reset [pin hole] button. Power button does nothing except start it up. I have already tried to put the stock update.img on an external SD hoping it would boot from there, but it did not. I am not sure what to do next, I have looked all over google and xda. Please help!
Thank you in advance!
Do you have a custom recovery installed? Did you try installing it threw fastboot files and cmd prompt on computer?
Please hit the thank you button if i helped!
techno-update said:
Do you have a custom recovery installed? Did you try installing it threw fastboot files and cmd prompt on computer?
Please hit the thank you button if i helped!
Click to expand...
Click to collapse
There ins't a custom recovery installed, this device flashes by detecting an update.img and askes to install it. It doesn't get past what would be considered the kernel screen. This tablet doesn't work like a standard android phone. There are no hard buttons except the power button, so attempting to get into any recovery is not possible. It also doen't boot enough to add any files to it.
Sounds like your screwed. Sorry.....
Please hit the thank you button if i helped!
check out this link
http://forum.xda-developers.com/showthread.php?t=1410862&page=9
Ok, just bricked my Nextbook 7
Here is how I flashed a firmware without access to recovery:
If you are in a bootloop, Connect USB and Power.
Press and hold pin on back until you hear windows try to detect a device but the screen is off.
Download this: http://arctablet.com/assets/tools/Fi..._Tool_v1.4.zip
Install the driver from the drivers folder.
3. Installing the drivers on the computer
Following the tablet entering in recovery mode, the computer should now show it has found a new USB device and prompt for a device driver. Select the appropriate driver in the driver directory from the Rockchip Flash Tool 1.4 package.
It will then install the driver for RK29 Device
4. Sending the firmware to the tablet
The flashing tool should display a green square around the number 1 in the lower left area of the Windows application.
Select the firmware file to flash using the button in the top right area of the application. Select the update.img file from here:
http://www.multiupload.com/NQHSNZJSO2
Then push the Upgrade button to transfer the selected firmware to the tablet.
The firmware will be copied to the tablet, a progression counter will go from 0% to 100% on this step, followed by a verification.
You are done, let the tablet reboot and update itself. It should take a few minutes for the flash process to finish.
This procedure has been successfully tested on Windows XP 32 bits for flashing a bricked NextBook 7 Premium YF1011 (but should work on others)
Help !!
Please help, got the tablet yesterday NEXT7P12 YF091211085 by flashing the official site was a brick, the tablet will not turn on, the computer does not see it.
screen moved after installing rom
Hi, i don't know if I'm on the right place but if anyone can help me, please I haw the Nextbook 7 premium and have instaled costum rom on it, but after rebooting my screen position has moved from right to left 2 cm and from up to down 1 cm , so my screen is moved I don't know why I have try to install 3 other rom and factory firmware but the screen is still moved or should I say cut. Any ideas? please I have try to google it but no luck...
I no longer have my np7 but I did try just about every ROM for it. Never have I had or seen an issue like this, and in truth I can't think of what the issue may be.
There are different np7 variants and some don't play nice with custom ROMs (built sept 2012 and older lose WiFi) so you might have a model that can only use one software due to hardware/firmware change.
There never was much development for the np7 here, I think finlessbob and others are still working on it at freaktab.com maybe see if they can help
Sent from my Nexus 4 using xda premium
d33dvb said:
Ok, just bricked my Nextbook 7
Here is how I flashed a firmware without access to recovery:
If you are in a bootloop, Connect USB and Power.
Press and hold pin on back until you hear windows try to detect a device but the screen is off.
Download this: http://arctablet.com/assets/tools/Fi..._Tool_v1.4.zip
Install the driver from the drivers folder.
3. Installing the drivers on the computer
Following the tablet entering in recovery mode, the computer should now show it has found a new USB device and prompt for a device driver. Select the appropriate driver in the driver directory from the Rockchip Flash Tool 1.4 package.
It will then install the driver for RK29 Device
4. Sending the firmware to the tablet
The flashing tool should display a green square around the number 1 in the lower left area of the Windows application.
Select the firmware file to flash using the button in the top right area of the application. Select the update.img file from here:
http://www.multiupload.com/NQHSNZJSO2
Then push the Upgrade button to transfer the selected firmware to the tablet.
The firmware will be copied to the tablet, a progression counter will go from 0% to 100% on this step, followed by a verification.
You are done, let the tablet reboot and update itself. It should take a few minutes for the flash process to finish.
This procedure has been successfully tested on Windows XP 32 bits for flashing a bricked NextBook 7 Premium YF1011 (but should work on others)
Click to expand...
Click to collapse
Your link not working? Send alternative link please!
Hello guys, I'm here because my TF201 seems to be bricked ...
I know, there is a lot of threads about this kind of problems, but I can't succeed to solve mine by reading hundred of threads.
I explain what's happened :
My TF201 has an unlocked bootloader (by asus method), root, and has a CWM (CWM-based Recovery v5.5.0.4). I was on the lattest ICS build (9.4.2.15). Since october, i know that JB was on TF201, but not mine. So I decide to download the lattest Stock JB version from Asus website and to place it into my SDcard. I reboot my TF201 in recovery (holding down the volume button, then up), I've done a backup. After this backup, I've done a factory reset and I install the new ROM from my SDcard. Maybe I should not do this ... But now, my tablet stay on the bootscreen (Asus EEE pad logo). I can always access to the recovery, so I tried to factory reset and restore my previous backup ... But it didn't work, my tablet still bricked.
So, I went to google, i've read lots of threads for trying to understand whats happened to my TF201. I've read some thread on XDA forum too.
I've tried every solutions proposed, and anyone work.
I've read some articles about ADB. I installed it, but the problems is that my TF201 can't be detected by my computer (Running Win8 64). I installed drivers from here : http://forum.xda-developers.com/showthread.php?t=1379875
But, still nothing, impossible to show my device when I write "adb devices" or "fastboot devices" in windows cmd.
I'm a little bit desesperate, so i came here for writting this thread, hopping that someone could help me to unbrick my TF201 without send it back to Asus (wich cost me hundreds of euros).
I'm going in front of some questions that i've read in other thread :
No i've not TWRP recovery installed.
I haven't got a nvFlash.
Thanks for reading this thread and for your help !
Sincerelly,
Thrakka.
PS : I'm really sorry for my bad english, don't blame me ^^
You can access recovery?
Then you are not bricked.
Why not flash a custom rom?
Garret said:
You can access recovery?
Then you are not bricked.
Why not flash a custom rom?
Click to expand...
Click to collapse
Primarily because he has cwm recovery and jellybean bootloader. He does not know how to set up his drivers on his computer for fastboot to install the correct recovery for his bootloader.
to the OP, go here http://forum.xda-developers.com/showthread.php?t=1615990 and figure out how to get twrp for jellybean on your prime. TWRP supports flashing roms from the microsd slot so you dont need to push one to your sd. also if you need help getting the naked drivers to work on your prime go the link http://forum.xda-developers.com/showthread.php?t=1426502 that pertains to others putting it on the prime. they will be more help than the galaxy naked drivers users. FORGET ABOUT CWM!!! IT IS NOT SUPPORTED ON PRIME FOR JELLYBEAN
@ Garret
Yes I can access to recovery, but for flashing a new rom, I need to access my internal SDcard ... But infortunatelly, now I can't.
A thing that I don't understand is when I restore my ICS backup, it doesn't work ...
@ Whycali
I'm gonna try your advice this afternoon.
But how can I install TWRP on my prime without access ... I'm will try with your links ... Hoping succeed ...
I'll give you the results in the evening.
Sincerely,
Thrakka.
I can access to the fastboot mode, but impossible to flash anything ...
I've taken all driver for the prime on my computer, install them.
the command "fastboot devices" work, i can see my prime : 00000 fastboot
but when I try the command "fastboot -i 0x0b05 flash recovery twrp.blob" from www{dot}teamw.in/project/twrp2/93, the result : error: cannot load 'twrp.blob' : No error.
I can't understand.
The directory "/platform-tools" from the ADT is in the PATH variable, and the file "twrp.blob" is in the same directory. Two ways for the fastboot command to find it, but it can't succeed ...
Same problem when I want to create my own nvflash blob file (tuto from androidroot.mobi/t3_nvflash/) with the command "fastboot -i 0x0b05 flash staging ebtblob.bin", the result is the same : error: cannot load 'ebtblob.bin' : No error.
I can't see my mistake ... Could you help me ?
Sincerely,
Thrakka.
PS : as i'm a new member, I can't post direct link to other site where I found tutos, sorry ...
Thrakka said:
I can access to the fastboot mode, but impossible to flash anything ...
I've taken all driver for the prime on my computer, install them.
the command "fastboot devices" work, i can see my prime : 00000 fastboot
but when I try the command "fastboot -i 0x0b05 flash recovery twrp.blob" from www{dot}teamw.in/project/twrp2/93, the result : error: cannot load 'twrp.blob' : No error.
I can't understand.
The directory "/platform-tools" from the ADT is in the PATH variable, and the file "twrp.blob" is in the same directory. Two ways for the fastboot command to find it, but it can't succeed ...
Same problem when I want to create my own nvflash blob file (tuto from androidroot.mobi/t3_nvflash/) with the command "fastboot -i 0x0b05 flash staging ebtblob.bin", the result is the same : error: cannot load 'ebtblob.bin' : No error.
I can't see my mistake ... Could you help me ?
Sincerely,
Thrakka.
PS : as i'm a new member, I can't post direct link to other site where I found tutos, sorry ...
Click to expand...
Click to collapse
on your pc you need to run the command from the same directory that contains the file you wish to transfer. easiest way to do this is to place the blob in the folder where your fastboot application is then hold shift and right click inside the folder. from the menu that opens choose open command window here. from there run your fastboot commands.
---------- Post added at 12:37 PM ---------- Previous post was at 12:02 PM ----------
hey, hold up and check your pm. Do not install TWRP for jb if you are still on the ICS bootloader.
you can check which bootloader version of twrp to install by where the nvidia logo is on the bootscreen. bottom center needs ics twrp. bottom right needs Jellybean twrp. By all means if you are still with ics finish the nvflash backups first.
867-810 Eecuri
Little update for the post :
I succeed all this steps, I've TWRP for ics now.
I'm looking for an ICS Rom for install it.
What could I do if I want to have a JB ROM ?
Thrakka said:
Little update for the post :
I succeed all this steps, I've TWRP for ics now.
I'm looking for an ICS Rom for install it.
What could I do if I want to have a JB ROM ?
Click to expand...
Click to collapse
Follow the instructions fully in the second post of the androwook thread for upgrading from ics.
All problem are solved !
Thanks Whycali for your precious help !
I've installed the AndroWook ROM, and it's a real pleasure !
Good Job man, I was travelling, just saw you made it
Thank you Garret ;D
It was not as bad as i was thinking before posting this thread !
Just compatilibity problem between a JB rom with ICS bootloader and ICS recovery ^^
senior member, can you help me with this problem ?
http://forum.xda-developers.com/showthread.php?t=2263137
Help with tf201
Hey all,
To start I have a bricked tf201. i was following a Youtube tutorial to update my twrp. i followed the instruction diligently. I was running CM 10.1 on the tf201. After the Install I rebooted and now it boot loops. if i hold vol down + pwr button it looks for revovery kernel and then fails. if i hold Vol up + pwr button it vibrates and black screen assuming this is apx mode. i followed ever tutorial on apx and i can't get anything to work. is there any hope for this tablet? Thanks in advance!
bricked tf201 too
bucknerspc said:
Hey all,
To start I have a bricked tf201. i was following a Youtube tutorial to update my twrp. i followed the instruction diligently. I was running CM 10.1 on the tf201. After the Install I rebooted and now it boot loops. if i hold vol down + pwr button it looks for revovery kernel and then fails. if i hold Vol up + pwr button it vibrates and black screen assuming this is apx mode. i followed ever tutorial on apx and i can't get anything to work. is there any hope for this tablet? Thanks in advance!
Click to expand...
Click to collapse
I have the same issue. Only a black screen on VolUP+Power or The Device is unlocked on VolDown+Power. I can't do anything, the usb driver is not reconize and fastboot or adb shows anything. Please any help to recovery?
Thanks in advance
Another Bricked tf201
Aduniel said:
I have the same issue. Only a black screen on VolUP+Power or The Device is unlocked on VolDown+Power. I can't do anything, the usb driver is not reconize and fastboot or adb shows anything. Please any help to recovery?
Thanks in advance
Click to expand...
Click to collapse
Hello Aduniel: I have essentially the same issue with my tf201. It seems to be hard bricked? (My guess.) If I reboot with Volume Down and Power button, I get a message "This device is Unlocked" in upper left of screen. Also large lettering in center of the screen, "ASUS" and "nNidea Tegra 3" in the lower right.
If I boot with Volume Up and Power button, I get a blank, black screen. (APX mode).
I have set up ADB and naked drivers on a notebook running Windows 7. When I try to connect via fastboot, I get a message <waiting for device>. But it does not connect.
I was wondering if you managed to get your tablet working since Nov. 2013? If so, what did you have to do? I need to know if there is any hope, or have I shot myself in the foot, as they say.
Cheers man,
Jim
Hard Brick TF201
JRKirkey said:
Hello Aduniel: I have essentially the same issue with my tf201. It seems to be hard bricked? (My guess.) If I reboot with Volume Down and Power button, I get a message "This device is Unlocked" in upper left of screen. Also large lettering in center of the screen, "ASUS" and "nNidea Tegra 3" in the lower right.
If I boot with Volume Up and Power button, I get a blank, black screen. (APX mode).
I have set up ADB and naked drivers on a notebook running Windows 7. When I try to connect via fastboot, I get a message <waiting for device>. But it does not connect.
I was wondering if you managed to get your tablet working since Nov. 2013? If so, what did you have to do? I need to know if there is any hope, or have I shot myself in the foot, as they say.
Cheers man,
Jim
Click to expand...
Click to collapse
Hello Jim,
I have the same problem.
I kan also do APX mode but nothing wil work.
If i type apd devices: there is nothing displayed.
Also when I try to flash, it says: waiting for device.
I only once had connection with easyflasher and it saw the TF201: Chipuid: 0x98243044050469391, but later one nothing happend.
I waited for 45 minutes and stil, nothing was done.
I hve been disperate, so can anyone help us, Plaese.
Th TF201 is now dead since oktober 2013, ppfffffffffffffffffffff
Thanks. greetings 5079
Hi guy,
First, sorry for my bad english, I'm french.
Secondly, I talk with a small community and we trying to root the OT 5020x on Jelly Bean 4.1.
How to root this phone ?
See you and thanks for all!
Up
1.Dowoad the file from the link below.
2. Then download Clockwork Mod Custom Recovery.
3. Then boot into recovery mode, and choose "install from SD Card".
4. Choose Clockwork mod recovery.zip, and it will boot you into a different recovery.
5. From that recovery mode you should be able to flash .zip files without signature verification.
6. Choose install zip from SD Card and choose SU Installer.zip.
Note:To unroot just flash SU Uninstaller.zip the same way you did to flash Installer.zip.
Downloads:
CWM Custom Recovery (Choose either Touch Recovery or Recovery for your device.):
http://clockworkmod.com/rommanager
SU Installer:
http://www.mediafire.com/?0r9dx4t1utvvuj0
SU Uninstaller:
http://www.mediafire.com/?c469p1nu64e92gf
Be Sure To Click Dat THANKS Button If I Helped!
Sent from my GT-I9100 using xda premium
Bonjour
J'ai suivi ce poste (procedure un peu longue) et tout c'est bien passé pour moi (One touch m'pop de chez free: rooté ).
http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
Cordialement.
PS: Il faut etre bien rigoureux sur les etapes de cette procedure. Je ne peux etre tenu pour responsable en cas de brickage du telephone.
Ronny927, in the page //clockworkmod. com/rommanager isn't the rom for the alcatel m'pop. Can you upload a .zip file for this phone please?
Lucien, if you understand me.... xd, can you upload your .img file? I can't get the recovery file with the sp flash tool
Sorry for my english, i am spanish
I don't see rom for alcatel here, maybe there is another way for this but i just can't get around it.
Anyways, i spend some time searching, and came up on some french forum, some guy said he rooted his m'pop using this method.
(Since i'm new user i cannot post outside links)
pastebin-com-c6gwDsbk
(replace "-" with "." and "/" )
This was translated with google translate so it might have some mistakes. For people speaking french, here's the full post in french.
pastebin-com-E8KaP0tZ
Can anyone confirm this procedure is working ? I am still not comfortable playing with my phone regarding this, because i'm still noob about these things. If anyone can try this method and share your opinions i'd be grateful.
Yeah! That link was really usefull, the french guy's procedure works perfect!
kiroga123 said:
Yeah! That link was really usefull, the french guy's procedure works perfect!
Click to expand...
Click to collapse
I'm glad it worked out for you. However i did tried this method, but with no success. After step 17 - flash from sd card zip, it says error installing, or something. Tried for 6-7 times but with no success .
I made a rar with all necesary here is inside are the instructions in a .txt, (I should clarify that I have not tried yet), comment if it works.
Replace the %2A... in the url with a d f .l y without spaces and then click ok skip ads Sorry for my bad english
leonardv128 said:
I made a rar with all necesary here is inside are the instructions in a .txt, (I should clarify that I have not tried yet), comment if it works.
Replace the %2A... in the url with a d f .l y without spaces and then click ok skip ads Sorry for my bad english
Click to expand...
Click to collapse
THANK YOU!!!!!!!!
1. With your Files we need just the step #8 from this HowTo
http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
2. After that we need to install the SU as zip-File (f.e. http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5) in recovery mode (After Volume Up + Power -> install zip)
Done!
echoffs said:
I'm glad it worked out for you. However i did tried this method, but with no success. After step 17 - flash from sd card zip, it says error installing, or something. Tried for 6-7 times but with no success .
Click to expand...
Click to collapse
Code:
[URL="http://www.phonandroid.com/forum/root-rooter-le-alcatel-one-touch-m-pop-t57072.html"][B][SIZE="5"]Here is a procedure[/SIZE][/B][/URL] for the Alcatel one touch rooter m'pop 5020x from home free
File download
[url]http://www.alcatelonetouch.com/uk/support/faq/one_touch_upgrade.html[/url]
One Touch Upgrade S 2.8.0
[url]http://www.alcatelonetouch.com/fr/[/url] [...]-setup.exe
SP FlashTool
[url]http://dl.free.fr/mOx6zdo3z[/url]
Recovery changes
[url]http://dl.free.fr/k1jmZR4Dx[/url]
Stock ROM
[url]http://dl.free.fr/rOq9NslEn[/url]
Scatter file
[url]http://dl.free.fr/npp9eiiVj[/url]
- On the phone to enable USB debugging mode (in "Settings" - "About phone" - "Advanced Settings" - "USB debugging")
- Connect the phone on USB.
- Install the ADB driver with the file loaded "One Touch Upgrade 2.8.0 S" (installed software only if you go to the end of the installation process will put your phone in factory)
- Check that is well recognized in the device manager as "Android Phone" - "Alcatel Android ADB Interface"
- Disconnect the phone and turn it off.
- Launch SP FlashTool
- In unguled "Download" under "Scatter-loading File" select the scatter file you loaded
- In the section below, check ONLY the "RECOVERY" check box (uncheck the other if there has checked and select
the "Recovery .... img" file you loaded by clicking the "RECOVERY" next to the box. (I do not know if I'm clear of??)
- Click on Download (note use the "download" button and especially not "Firmware -> Upgrade")
- A window appears informing you that going the whole picture is not loading correctly. this is normal click "YES" or "OK"
- Connect the phone "extinguished"
- Wait for a new small window with a green ring tells you "Download OK" appears
.
- Normally all these well.
- Disconnect the phone (remove the battery)
- The restart by pressing the start button and still pressing "vol +" until the appearance of
selection menu "recovery" "fastboot" "" normal. "go to recovery with the" Flight + "and pressing" vol-"
- Voila, your phone is Roote, it remains only to install a zip or SU Play store.
I did the whole procedure from the dump of my rom and everything went well.
I give this procedure for information. If your phone does not restart after the operation, I would not be held responsible.
[email protected] said:
Code:
[URL="http://www.phonandroid.com/forum/root-rooter-le-alcatel-one-touch-m-pop-t57072.html"][B][SIZE="5"]Here is a procedure[/SIZE][/B][/URL] for the Alcatel one touch rooter m'pop 5020x from home free
File download
[url]http://www.alcatelonetouch.com/uk/support/faq/one_touch_upgrade.html[/url]
One Touch Upgrade S 2.8.0
[url]http://www.alcatelonetouch.com/fr/[/url] [...]-setup.exe
SP FlashTool
[url]http://dl.free.fr/mOx6zdo3z[/url]
Recovery changes
[url]http://dl.free.fr/k1jmZR4Dx[/url]
Stock ROM
[url]http://dl.free.fr/rOq9NslEn[/url]
Scatter file
[url]http://dl.free.fr/npp9eiiVj[/url]
- On the phone to enable USB debugging mode (in "Settings" - "About phone" - "Advanced Settings" - "USB debugging")
- Connect the phone on USB.
- Install the ADB driver with the file loaded "One Touch Upgrade 2.8.0 S" (installed software only if you go to the end of the installation process will put your phone in factory)
- Check that is well recognized in the device manager as "Android Phone" - "Alcatel Android ADB Interface"
- Disconnect the phone and turn it off.
- Launch SP FlashTool
- In unguled "Download" under "Scatter-loading File" select the scatter file you loaded
- In the section below, check ONLY the "RECOVERY" check box (uncheck the other if there has checked and select
the "Recovery .... img" file you loaded by clicking the "RECOVERY" next to the box. (I do not know if I'm clear of??)
- Click on Download (note use the "download" button and especially not "Firmware -> Upgrade")
- A window appears informing you that going the whole picture is not loading correctly. this is normal click "YES" or "OK"
- Connect the phone "extinguished"
- Wait for a new small window with a green ring tells you "Download OK" appears
.
- Normally all these well.
- Disconnect the phone (remove the battery)
- The restart by pressing the start button and still pressing "vol +" until the appearance of
selection menu "recovery" "fastboot" "" normal. "go to recovery with the" Flight + "and pressing" vol-"
- Voila, your phone is Roote, it remains only to install a zip or SU Play store.
I did the whole procedure from the dump of my rom and everything went well.
I give this procedure for information. If your phone does not restart after the operation, I would not be held responsible.
Click to expand...
Click to collapse
Does anyone if this method works for the Alcatel OT 5020A???
It works for OT-5020A
Plz Help
dm.homelinux.com said:
THANK YOU!!!!!!!!
1. With your Files we need just the step #8 from this HowTo
http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
2. After that we need to install the SU as zip-File (f.e. http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5) in recovery mode (After Volume Up + Power -> install zip)
Done!
Click to expand...
Click to collapse
PLz sir i am a noob user of alcatel 5020D M'pop i Have done all the steps in the txt files but i dont under stand any thing from the 2 steps u added to the how to
plz help
now i can acces recovery mode but i cant get the SU.zip to install it
Hesham11 said:
PLz sir i am a noob user of alcatel 5020D M'pop i Have done all the steps in the txt files but i dont under stand any thing from the 2 steps u added to the how to
plz help
now i can acces recovery mode but i cant get the SU.zip to install it
Click to expand...
Click to collapse
Follow the procedure at the begining of the thread. Or download the full package with instructions. There's no problem with it. The most important thing is that your PC recognizes your 5020 as it said.
AlexGardunio said:
Follow the procedure at the begining of the thread. Or download the full package with instructions. There's no problem with it. The most important thing is that your PC recognizes your 5020 as it said.
Click to expand...
Click to collapse
I'm really sorry but i didnt get which thread do u mean the one with scatter file (i dont get a word out of it)
Or the thread i quoted
The pc recognized my alcatel after sevral tries but it did recognize it).
Can u copy for me what should i do next
Thanks in advance
Hesham11 said:
I'm really sorry but i didnt get which thread do u mean the one with scatter file (i dont get a word out of it)
Or the thread i quoted
The pc recognized my alcatel after sevral tries but it did recognize it).
Can u copy for me what should i do next
Thanks in advance
Click to expand...
Click to collapse
Hi my friend. I refer to the procedure in this thead. I've failed doing it because my pc didn't recognize my phone exactly as it should. In the exact moment it recognizes my phone everything worked as it should and I got my phone root and all. Any doubt, please let me know.
AlexGardunio said:
Hi my friend. I refer to the procedure in this thead. I've failed doing it because my pc didn't recognize my phone exactly as it should. In the exact moment it recognizes my phone everything worked as it should and I got my phone root and all. Any doubt, please let me know.
Click to expand...
Click to collapse
Ok now i will sound really stupid but i am sorry i really cant proceed.
Look now the device completely recognizes my alcatel 5020D can u copy for me which procedures should i follow next ??
(i managed to open the recovery mood but i dont know what to do next)
sorry for being a troublesome
I just came across this thread. I own the Alcatel One Touch Evolve 5020N on MetroPCS. I haven't activated it. I'm going to give 5 of 'em to my children for use as Wi-Fi only music and game players. I was wondering if you'd can be used for my phones do they will have CWM? I followed directions I found on rooting, so that's out of the way, just need a recovery. Thanks.
Sent from my LG-MS770 using Tapatalk
Hesham11 said:
Ok now i will sound really stupid but i am sorry i really cant proceed.
Look now the device completely recognizes my alcatel 5020D can u copy for me which procedures should i follow next ??
(i managed to open the recovery mood but i dont know what to do next)
sorry for being a troublesome
Click to expand...
Click to collapse
Take it easy my friend, we all suffer this kind of stuff and this Alcatel OT isn't a piece of cake hehe. Download this link and besides the files you'll find a tutorial with the easiest way to root and all your phone. I've been surfing and I think it's the clearest way for you to follow. I've tried it and works perfectly.
https://mega.co.nz/#!R0IEyCKI!YhnPpE6Hfim2Kbrrbk5OITO8npQP3B8Qw5eEtWm7Gyc
This is now DEPRECATED and NOT SUPPORTED ANYMORE since there is an easier method to do it! Links won't get updated! You can still use the written info!
If you want rooted kitkat head to my friend's thread @maxx_hr (THANK YOU FOR ALL YOUR WORK!) HERE: http://forum.xda-developers.com/optimus-l3-l5-l7-l9-ii/development/kk-kk-kdz-p710-root-t2950532
Hello to you all!Warning:
Code:
[COLOR="Red"][SIZE="4"]Your warranty is now void. I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about all contained in this tutorial
before you follow it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
But since i'm a nice dude i will try to guide you anyway:)[/SIZE][/COLOR]
In this tutorial we will learn how to:
- achieve root on our L7 II (Both single and dual-sim, so P715/P710 and all the derivated phones from them) by LG running a Custom Rom or Stock KK Rom.
FOR THIS FOLLOW ALL STEPS.
- unbrick/flash to a specific firmware using Lg Flash Tool (In this tutorial there are only 2 KDZ files stock JB for P710 and P715. If you want to recover from a brick or want a different KDZ file you can find them over here: http://lg-phone-firmware.com/)
FOR THIS FOLLOW STEP 1 AND STEP 2 (install all drivers including adb and download the files that are needed at Step 2).
- flash with CWM (There are 3 methods I describe. Use the one that suits you the best. You can flash any *.zip that is suitable for your device.)
FOR THIS FOLLOW STEP 5.
Save your data you need, you will lose all data so backup with Titanium Backup or a program you like the info you need.
ALL DOWNLOADS ARE AT THE BOTTOM OF THE POST!
This tutorial will be split in steps as the following:
1. Preparing the Windows machine with the right drivers and software.
2. Reverting back to Jellybean Stock Rom.
3. Rooting on Stock Rom (Jellybean).
4. Installing Unlocked Bootloader and ClockWorkMod Recovery (CWM).
5. Flashing KitKat or a Custom Rom through CWM.
6. Flashing Root through CWM.
So let's start the job.
1. Preparing the Windows machine with the right drivers and software.
Uninstall everything related to LG from Control Panel (Drivers, PC Sync etc).
Restart your PC.
Download and unrar the archive "LG Drivers.rar".
Install both files inside and restart your computer.
Download "adb-setup-1.4.2.exe" and install it (answers should be y y y and install the drivers when prompted).
Download "Framaroot-1.9.1.apk".
Download "LG Flash Tool 2014.rar".
Download "Free LG P710.rar"
Download "P710 Stock KK.zip". -> Stock KK image with Stock KK kernel in it made from the original V20 KDZ (Open Europe).
Download SuperSU
*Download "P715 Stock KK.zip" and "LG P715 (JellyBean).kdz" if you are running a dual-sim version of the phone.
*Download all the files you need!
From now on I will consider you have this files and I will just call their names when to use them.
2. Reverting back to Jellybean Stock Rom.
Open the back cover of your phone and pull the battery out. Wait about 10 seconds. Put the battery back in.
While HOLDING (keep pressed) the VOLUME DOWN BUTTON insert the USB Cable in the phone (you need to have your USB cable inserted in an USB 2 port from the back of your PC).
When you see the yellow screen with emergency mode stop pressing the button.
Unplug the USB from the phone and then plug it in again.
Unrar "LG Flash Tool 2014.rar" and open "LGFlashTool2014.exe" with right-click Run As Admin.
*If you cannot open this program you need to install "VC_RedistInstaller.exe". You are missing some libraries of visual C++*
*IF YOU HAVE ANOTHER PHONE (another LG or P715) DO THE SAME INSTRUCTION AND REPLACE JUST THE KDZ FILE ON "Select KDZ File" TO THE ONE YOU DOWNLOADED AND IS SUITABLE FOR YOUR OWN DEVICE.
Move PhoneMode from DIAG to EMERGENCY. Select KDZ File: you have a file called "V10J_00.kdz" in the same folder as the tool. Select that. Press CSE Flash (CAUTION!!! This will reflash the phone and YOU WILL LOSE ALL YOUR DATA SO BE WARNED).
Another screen will open and press START.
Another screen will open once again press OK.
At a point you will get an error like "Offline BLA BLA". DON'T DO ANYTHING DO NOT PRESS OK.
Wait until your phone reboots and then you can close this tool.
Remove USB cable.
IMPORTANT STEP:
Pull out the battery. Wait 10 seconds put it back. While holding VOLUME DOWN + HOME BUTTON press POWER BUTTON. Wait until you see LG logo and stop pressing POWER. Keep pressing the other 2 until you see android robot doing things. Wait until the phone boots.
CONGRATZ you are on JELLYBEAN (Or the KDZ you chose).
3. Rooting on Stock Rom (Jellybean).
When you see the welcome screen just fast forward everything.
Go to system settings->security->tick Unknown sources->OK.
Go to system settings->developer options->OK->tick USB debugging->YES.
With an SD card reader or with your USB connected as Media Sync (MTP) copy the "Framaroot-1.9.1.apk" to your SD Card.
Using the phone's FILE MANAGER go to external_SD and click the Framaroot you just copied. Run it using Package Installer Just Once and Install.
When finished press OPEN. At the first choice choose Install SuperSU and then press on "Gandalf". You will get Success. Press OK and reboot.
You will see SuperSU in you apps.
YAY! IT'S DONE.
4. Installing Unlocked Bootloader and ClockWorkMod Recovery (CWM).
*SAME FILE YOU NEED FOR LG P715
Earlier you have download "Free LG P710.rar" and in the first step you installed ADB. We will use that now.
Unrar the "Free LG P710.rar" and place the 2 files ON THE ROOT (only on root) of the SD card using device mounted in MTP mode or SD card reader. Put back the card if you use the second option.
WARNING!!!
This can mess up you device so just do what i say step by step!
Plug the USB Cable in the Phone once again and use MTP connection mode.
Click Start+R type CMD and press ENTER.
Run the Following with copy paste to CMD.
Code:
adb devices
You will see your device.
*IF YOU CANNOT MAKE YOUR DEVICE BE RECOGNIZED IN "adb devices" do this:
Install this: https://play.google.com/store/apps/details?id=jackpal.androidterm&hl=ro
Open terminal and continue with the steps down below.
Code:
adb shell
You will see something ending with $.
Code:
su
Unlock the dvice if it is locked and your phone will ask for superuser permission press GRANT.
Code:
dd if=/storage/external_SD/APPSSBL.bin of=/dev/block/mmcblk0p5
This will copy the unlocked bootloader to the bootloader partition.
Code:
dd if=/storage/external_SD/recovery.img of=/dev/block/mmcblk0p17
This will copy the CWM to recovery partition.
Code:
reboot recovery
This will reboot your phone in CWM if you followed all steps correctly.
GREAT SUCCES we have an unlocked bootloader and CWM.
Close your CMD.
Unplug USB.
5. Flashing KitKat or a Custom Rom through CWM.
*IF YOU WANT TO FLASH ANOTHER ZIP FILE OR YOU ARE ON P715 JUST USE THE ARCHIVE YOU NEED AS REFERENCE, NOT "P710 Stock KK.zip". CHOOSE THE FILE THAT IS MOST SUITABLE OR YOU THINK IT'S BEST FOR YOU
I made "P710 Stock KK.zip" you downloaded. This is the stock image for KK Open Europe. Here you can either flash mine or search for a Custom Rom for your device. Either way you will follow the exact same steps but with a different archive. I will take for reference the "P710 Stock KK.zip".
Plug USB in.
You Navigate using Volume Up Button (UP) and Volume Down Button (DOWN). The Power Button is OK.
Do this:
- Go to "wipe data/factory reset" and OK. Go to YES then OK. Wait until done.
- Go to "mounts and storage" and do the following: "format /cache" and "format /system" everytime with YES as second option. Press "go back" once.
- Go to "advance" and then "wipe dalvik cache" and YES. Press "go back".
Here you have 3 options.
OPTION 1.
Use an SD card reader copy the Zip file to the root of the SD card or copying using CWM. Using CWM you navigate with Volume Up and Volume Down to "mounts and storage" press POWER BUTTON (OK). Go to "mount USB storage" and your SD card will appear in windows and you can copy. After that you press "go back" 2 times to get to the main menu.
Go to "Install zip" and then "choose zip from sdcard". Search for the zip file and press OK then go to "YES" and press OK. Wait until done.
Go to "wipe data/factory reset" and OK. Go to YES then OK. Wait until done.
Press "Reboot System Now" and "yes" if asked (if you are asked about some fix or anything after you press reboot now choose the positive thing like the answer that is not no).
OPTION 2.
Copy the file using adb push. Open a CMD window in Windows (Start+R type CMD press ENTER). Copy this:
Code:
adb push
With the space. After space go where you downloaded the zip file highlight it and drag it in the CMD. Leave a space after that and type /sdcard (without space after).
Wait until done and close CMD.
After you copied the file to your sdcard go to "install zip" -> "choose zip from sdcard" -> search for the "P710 Stock KK.zip" press OK then go to "YES" and your installation will beging. Wait until it is done. Go to "wipe data/factory reset" and OK. Go to YES then OK. Wait until done.
Press "Reboot System Now" and "yes" if asked (if you are asked about some fix or anything after you press reboot now choose the positive thing like the answer that is not no).
NOTE: In the zip i made i don't know why i couldn't sideload it but usually you do not have to copy to SD card to flash something. You can sideload it. All you have to do is:
-Go to "install zip" -> "install from sideload"
On your computer open a CMD and copy this :
Code:
adb sideload
Copy with space and after what you copied grab the zip you want to flash and drag it to CMD. Hit ENTER. Sideload will send the zip to phone and process of flashing will start. After it is done reset to factory again.
Press "Reboot System Now" and "yes" if asked (if you are asked about some fix or anything after you press reboot now choose the positive thing like the answer that is not no).
CONGRATZ YOU ARE NOW ON KITKAT. I HONESTLY THINK THAT YOU SHOULD GO FOR THIS CUSTOM ROM OVER HERE BECAUSE IT IS LIKE 10 TIMES BETTER THAN THE STOCK KK. TO INSTALL JUST DOWNLOAD THE ZIP FILE FROM THERE (V2) AND FOLLOW THE TUTORIAL WITH JUST REPLACING THE ZIP WITH THE OTHER ZIP.
LINK TO ROM: http://forum.xda-developers.com/optimus-l3-l5-l7-l9-ii/development/l7-ii-p710-amigakitkat-t2890092
LINK TO DOWNLOAD: http://d-h.st/GSh
6. Flashing Root through CWM.
On some ROMS root will not be there. To avoid this we will flash the SuperSU zip.
To get to recovery you have 2 ways:
- From you ROM connect USB as MTP or in a way that ADB recognizes it (device gets detected by adb devices) type adb reboot recovery.
- Close your phone. At the same time press VOLUME DOWN + HOME BUTTON + POWER BUTTON. When you see the LG logo stop pressing POWER BUTTON. Keep the others 2 until you are in CWM.
Install the SuperSU zip with one of the ways you learnt at step 5.
You are rooted now.
Hope everything worked out fine for you and you are happy. Have a really nice day.
CREDITS:
riskey95 -> his work for CWM recovery and Hacked Bootloader
Chainfire -> for making SuperSu possible
Snoop05 -> for the amazing 15 seconds ADB Installer
alephzain -> making Framaroot, such an easy root method
santhoosh -> for the tutorial of making CWM flashable zip from KDZ
Amiga500 -> for super cool KK Rom
airidosas252 -> best kernel on the market
ME -> for putting everything together and writing this
Everyone i forgot just PM me
Lg Flash Tool 2014 : http://tinyurl.com/kggahet
P710 Stock KK.zip: http://tinyurl.com/p7q7d75
P715 Stock KK.zip: http://tinyurl.com/nllkxfm
P713_CIS_KK.zip: http://tinyurl.com/nv3uzop
LG P715 (JellyBean).kdz: http://tinyurl.com/lwv29xr
adb-setup-1.4.2.exe: http://tinyurl.com/qca8abd
VC_RedistInstaller.exe: http://tinyurl.com/n98r7wg
LG Drivers: http://tinyurl.com/l3mgf49
CHANGELOG:
- added support for P715
- added P713 CIS
- added new version of SuperSU
This is fantastic! I've been looking for how to convert KDZ to a CWM Zips because of trouble rooting the P713 Firmware
Dennydap said:
This is fantastic! I've been looking for how to convert KDZ to a CWM Zips because of trouble rooting the P713 Firmware
Click to expand...
Click to collapse
Does P713 have NFC?
This method actually works for dual sim too,you just have to use P715 kdz's.
KWG V2 said:
This method actually works for dual sim too,you just have to use P715 kdz's.
Click to expand...
Click to collapse
Yeah it does. Maybe this weekend I will mod it. It is usefull for recoverying from soft bricks also just Step 1 and 2.
it was great till i get stuck on boot loop ,,, now how to solve ?
thanks for the useful guide.
I have a problem though, I cannot go after kdz extraction.
LG Tools stops with an cryptic error like [009.400.120.120.120]PC????? and looking at the log it seems there are troubles in unpacking the kdz file.
I have tried with different roms but still the same.
Does anyone has the same problem ?
xak-fr said:
it was great till i get stuck on boot loop ,,, now how to solve ?
Click to expand...
Click to collapse
Where exactly did you get a boot loop?
thanks for the useful guide.
I have a problem though, I cannot go after kdz extraction.
LG Tools stops with an cryptic error like [009.400.120.120.120]PC????? and looking at the log it seems there are troubles in unpacking the kdz file.
I have tried with different roms but still the same.
Does anyone has the same problem ?
Click to expand...
Click to collapse
Did you run as administrator? Do you have drivers installed? Tell me exacly what you did and what happened.
xak-fr said:
it was great till i get stuck on boot loop ,,, now how to solve ?
Click to expand...
Click to collapse
the problem is on V10J,, i dont know where you find it but it stucks,,, i used the lg flashtool for flashing kit kat i got the original one and the phone starts running but the thing that made me curious is that nothin on phone changed,, it is the same as it was when i had stock kit kat,, no factory reset, no nothing,,, can anyone explain please ?
xak-fr said:
the problem is on V10J,, i dont know where you find it but it stucks,,, i used the lg flashtool for flashing kit kat i got the original one and the phone starts running but the thing that made me curious is that nothin on phone changed,, it is the same as it was when i had stock kit kat,, no factory reset, no nothing,,, can anyone explain please ?
Click to expand...
Click to collapse
I can't really understand you. The point of this guide is to get root on kitkat so flashing with lg flashtool will not work if you want kit kat rooted. I tested that V10J on my own l7 2 (p710). Also if you flashed Jellybean did you press CSE Flash not Normal Flash?
scholars nxperan
christi9503 said:
I can't really understand you. The point of this guide is to get root on kitkat so flashing with lg flashtool will not work if you want kit kat rooted. I tested that V10J on my own l7 2 (p710). Also if you flashed Jellybean did you press CSE Flash not Normal Flash?
Click to expand...
Click to collapse
sorry for my english ,, let me explain,, i had stock kit kat on my P710,, I flashed JellyBean (V10J that was on flashtool folder). after the flash (CSE Flash) finishes i got stuck on boot loop,, so after many tries to revive the phone i used to flash the stock kit kat again and the phone started working but in the phone nothing changed like nothing happened ,, i know it is not rooted , i flashed stock kit kat (V20A.KDZ)
so the problem is the boot loop i got after flashing V10J i found in folder,,,
xak-fr said:
sorry for my english ,, let me explain,, i had stock kit kat on my P710,, I flashed JellyBean (V10J that was on flashtool folder). after the flash (CSE Flash) finishes i got stuck on boot loop,, so after many tries to revive the phone i used to flash the stock kit kat again and the phone started working but in the phone nothing changed like nothing happened ,, i know it is not rooted , i flashed stock kit kat (V20A.KDZ)
so the problem is the boot loop i got after flashing V10J i found in folder,,,
Click to expand...
Click to collapse
What model you have P710?
christi9503 said:
What model you have P710?
Click to expand...
Click to collapse
yes, Lg optimus L7II P710
xak-fr said:
yes, Lg optimus L7II P710
Click to expand...
Click to collapse
Ok do that step again. Flash with that tool using the image i provided. After the last ok. Even when you get the offline error don't touch it until phone reboots. If you get bootloop do this.
1. Pull out battery. Wait 10 seconds. Push battery back in.
2. While holding POWER DOWN + HOME BUTTON press POWER BUTTON. Wait until you see LG logo then stop presing POWER. You will get to see android guy doing stuff. Then tell me if it's ok.
christi9503 said:
Ok do that step again. Flash with that tool using the image i provided. After the last ok. Even when you get the offline error don't touch it until phone reboots. If you get bootloop do this.
1. Pull out battery. Wait 10 seconds. Push battery back in.
2. While holding POWER DOWN + HOME BUTTON press POWER BUTTON. Wait until you see LG logo then stop presing POWER. You will get to see android guy doing stuff. Then tell me if it's ok.
Click to expand...
Click to collapse
yes, i get the boot loop but after the reset is ok,, now will go on other steps ,, thank you
xak-fr said:
yes, i get the boot loop but after the reset is ok,, now will go on other steps ,, thank you
Click to expand...
Click to collapse
Don't forget to press the thx button it's in the right . I will add this to the tutorial I didn't need it but who knows.
I managed to do the "root" step, but somehow cannot proceed with the next step.
When I check "USB debugging", the phone doesn't connect to the computer for some reason. I tried multiple computers, with no luck. The "adb devices" says just empty "List of devices attached".
If I disable the USB debugging, the phone gets connected just fine, if I enable it again, it gets stuck on "Connected as installer", and doesn't connect as MTP....
Any idea how to fix this?
Do you have drivers installed? Also when you press MTP cancel if your phone wants to install anything.
Sent from my LG-P710 using XDA Free mobile app
christi9503 said:
Do you have drivers installed? Also when you press MTP cancel if your phone wants to install anything.
Click to expand...
Click to collapse
I tried everything, without luck. I ended just using terminal emulator to copy the files on phone directly (might be cool to add this to your tutorial, as someone else can also have this problem). So, now I'm on Amigas ROM - makes a HUGE difference! Thanks, looking forward for some other custom ROMs for this phone..
vasikgreif said:
I tried everything, without luck. I ended just using terminal emulator to copy the files on phone directly (might be cool to add this to your tutorial, as someone else can also have this problem). So, now I'm on Amigas ROM - makes a HUGE difference! Thanks, looking forward for some other custom ROMs for this phone..
Click to expand...
Click to collapse
Strange huuummm. I don't know. Yeah i will add Terminal Emulator also in weekend. Never happened to any of my phones before... Maybe driver conflict on your PC or something like that.
Hello there,my Wave 8 HD+ stuck in android boot logo. I downloaded the wave8hd_20151105_v1.8 update thru wireless update and install, it says error in installing:
E:error in /mnt/internal_sd/adupsfota/update.zip
(Status 7)
Installation aborted.
My tablet is now in recovery mode and cant move highlight due to no volume buttons available,i can only select the "reboot system now" option.
Any other alternative for volume button so that i could just do the factory reset??
I also followed the detailed instruction on bluewave website on how to update the said Tablet thru PC but to no avail.
i emailed both the Telecom Company from where i get my Bluewave Tablet and the Bluewave Customer support but until now they stiil haven't replied yet.
thank you very much for your immediate reply.
-Jovi
jovirex said:
Hello there,my Wave 8 HD+ stuck in android boot logo. I downloaded the wave8hd_20151105_v1.8 update thru wireless update and install, it says error in installing:
E:error in /mnt/internal_sd/adupsfota/update.zip
(Status 7)
Installation aborted.
My tablet is now in recovery mode and cant move highlight due to no volume buttons available,i can only select the "reboot system now" option.
Any other alternative for volume button so that i could just do the factory reset??
I also followed the detailed instruction on bluewave website on how to update the said Tablet thru PC but to no avail.
i emailed both the Telecom Company from where i get my Bluewave Tablet and the Bluewave Customer support but until now they stiil haven't replied yet.
thank you very much for your immediate reply.
-Jovi
Click to expand...
Click to collapse
maybe try to use adb and try to push the firmware manually.. if they have a firmware download available
toolhas4degrees said:
maybe try to use adb and try to push the firmware manually.. if they have a firmware download available
Click to expand...
Click to collapse
I did use the software Rockchip Batch Tool v1.7 provided by Bluewave in their website,install the 33GT driver for my tab(Tab can now be seen by my PC and download the correct firmware update(using my serial number at the back of said tablet) still provided by Bluewave,but still error in upgrade..
i just want to know how to change the highlighted option in recovery mode so i can wipe/factory reset my Tablet disregarding the said update..
there is an option in recovery mode "recover system from back up" but i could not choose to highlight and select the option..
any alternatives for the volume button??Btw,the firmware provided by Bluewave is in ".img" format,not "zip"..
thank you so much for your reply..
-Jovi
i have the same problem, got an error after wireless update.. please help!
to fix this... use your otg cable and connect a usb mouse then reboot it once its reboot use the mouse to move into the recovery mode... wipe data and cache then select update adb sideload once inside the sideload press the power button until it reboot.. once you see the bluewave and its start to have a loading in the lower right corner.. voila... your tablet is fix ... hope it help u
ohgnevets said:
i have the same problem, got an error after wireless update.. please help!
Click to expand...
Click to collapse
wave 8hd+
jho_zep said:
to fix this... use your otg cable and connect a usb mouse then reboot it once its reboot use the mouse to move into the recovery mode... wipe data and cache then select update adb sideload once inside the sideload press the power button until it reboot.. once you see the bluewave and its start to have a loading in the lower right corner.. voila... your tablet is fix ... hope it help u
Click to expand...
Click to collapse
hello, jho_zep, thank you so much for your reply, i am now able to move the highlight to select using my mouse, but still when i try to update from ADB, it tells me to send package to the device etc.. and i also tried to press the power button, it wont reboot the system, it would only shutdown the system.. another thing, i still cant get rid of the system update. " installing system update" then error comes in, my android is down.. i tried wipe date/ factory reset, still nothing.
Thanks in advance
Do you already solve your problem? because I have now the same problem as this.
I have pressed the wireless update then it restarted and it says an Error status 7.
I don't know what to do and how to deal with this problem.
can you help me?
My nextbook tablet rk3026 has a partition named metadata that holds the recovery boot commands. You could possibly try to wipe it and do a factory reset. I don't think it actually gets mounted so you would need to find a file the same size as the partition and dd to it. Or back up your system with rockchip flash tool then using a hex editor replace all data in metadata image with zeros. Obviously be careful. Here is a tool download with included guide credits to finless at freaktab(not sure if he is here at xda) for posting it.
http://freaktab.com/forum/developme...p-your-rk-device-rom-with-the-new-rk-2-1-tool
as always BACKUP and know if you don't do it correctly you may get a brick.
thank you for the response Destructos. but that solution won't help for my freakin weird tab 33gt HD+.
I get frustrated now
Problem solved
first thing to do is make sure that you have already installed the rkchip_usb driver in your computer.
What are the requirements?
1st of course your Tablet and Cable Connector
2nd Finless ROM Flash Tool v1.37
3rd Rokchip BatchTool v1.7
4th the update image/firmware for your Bluewave 8 HD+ that is downloadable from their official website
Steps:
1. off your tablet and connect it to the computer
2. open the Finless Rom Flash, uncheck all the boxes
3. turn ON your Tablet (be attentive) and while the blue screen is starting you may NOTICE that the ROM FLASH TOOL detected your device, it says "RKAndroid Mass Storage USB". when you have read that, press immediately the "Reboot Flash mode" and your device will in black screen. but ROM Flash tool still detected your device as "RKAndroid Mass Storage USB "
4. Open the Batch Tool, (you must know how to use it) find your image, then you will notice that the CONNECTED DEVICES below have color green, in that case you may now Click UPGRADE. wait for a minute and booooom, you device is functionable again.
have a feedback if it is helpful.
P.S.
before I go to that steps, when I am stuck in RECOVERY MODE of my device, I Click the Recover from BACKUP then my tablet restarts and it turns to BOOTLOOP and repeatedly saying NO COMMAND.
PLDC said:
first thing to do is make sure that you have already installed the rkchip_usb driver in your computer.
What are the requirements?
1st of course your Tablet and Cable Connector
2nd Finless ROM Flash Tool v1.37
3rd Rokchip BatchTool v1.7
4th the update image/firmware for your Bluewave 8 HD+ that is downloadable from their official website
Steps:
1. off your tablet and connect it to the computer
2. open the Finless Rom Flash, uncheck all the boxes
3. turn ON your Tablet (be attentive) and while the blue screen is starting you may NOTICE that the ROM FLASH TOOL detected your device, it says "RKAndroid Mass Storage USB". when you have read that, press immediately the "Reboot Flash mode" and your device will in black screen. but ROM Flash tool still detected your device as "RKAndroid Mass Storage USB "
4. Open the Batch Tool, (you must know how to use it) find your image, then you will notice that the CONNECTED DEVICES below have color green, in that case you may now Click UPGRADE. wait for a minute and booooom, you device is functionable again.
have a feedback if it is helpful.
P.S.
before I go to that steps, when I am stuck in RECOVERY MODE of my device, I Click the Recover from BACKUP then my tablet restarts and it turns to BOOTLOOP and repeatedly saying NO COMMAND.
Click to expand...
Click to collapse
Why is it, when I do this, my tablet can't be detected by the software? I'm stuck on recovery mode. When it's on the blue logo, still does nothing.
I can only see my device when I look for it on Device Manager under Android Phone. Why is that? It doesn't show the "Other Devices". I've installed the driver but to no avail, still fails me. Please help. Thanks!