I recently used Odin to update to froyo 2.2 from my eclair 2.1, and it "pass"ed but now my phone goes into recovery mode. Boot screen then recovery, even when its off and begins charging goes straight to recovery.
At recovery it says:
"update media, please wait
E: Cant mount /dev/block/mmcblk0p1
(Invalid argument)
E;copy_dbdata_media: Cant mount SDCARD:
your storage not prepared yet. please usee UI menu for format and reboot"
But UI menu doesnt work, doesnt let me select anything, and download mode wont load so Odin gets stuck at "Setup Connection".
Help?
Thanks!
- try different versions of Odin's this is the most common issue.
- Make sure your using the correct Eclair 2.1 files the ones by Eugene the unbrickable one.
Mostly, try a different ODIN, and the one that works, don't switch from it.
Odin is the only thing keeping my phone good as new, and i dont need any updates on that.
xrider is correct, I would recommend the 1.7 Odin. You can then Odin back by first flashing Eugenes Froyo that does not brick, then back to JFD2.1
you can get all you need in the Stickies
From there you can root and then flash away
good luck,
Thanks for the replys.
But for Odin to work, wouldn't the device need to be in Download Mode? Which would explain why it doesn't go beyond "SetupConnection". I used the same Eclair rom as I did for my previous recovery. But it fails now, I also tried different versions of Odin from 1.0 to 1.7. Oh an Odin recognizes my phone as a COM6, if that means anything.
I might just go ahead and call Tmo and get a new one. I still have insurance and a warranty.
Hmmm...
Dark619Cloud said:
Thanks for the replys.
But for Odin to work, wouldn't the device need to be in Download Mode? Which would explain why it doesn't go beyond "SetupConnection". I used the same Eclair rom as I did for my previous recovery. But it fails now, I also tried different versions of Odin from 1.0 to 1.7. Oh an Odin recognizes my phone as a COM6, if that means anything.
I might just go ahead and call Tmo and get a new one. I still have insurance and a warranty.
Hmmm...
Click to expand...
Click to collapse
Wait, if you can't get into Download mode, then how are you getting COM6 on ODIN?
I have no idea. Phone just sits in recovery, I plug in USB and it says
<ID:0/006> Added!!
But when I try flashing anything, it stays at SetupConnection.
When I WAS able to get into download mode, it was COM8.
Wait for more replies, idk the solution. Sorry
Maybe new version of odin?
I really appreciate your help though.
I think it's just bricked. The froyo which I had updated to was probably faulty, causing this to occur. I mean, even the recovery menu is messed up. Up and down are inverted, and power button does nothing. Phone doesn't show charging screen(well it does for a second then go straight to recovery).
I'll just call T-mobile tomorrow. I wouldn't get charged right? I tried updating to THEIR firmware, had they made it OTA this wouldn't have occurred, right?
The fact it sees com 6 or com8 or com 4 really isn't important, sometime mine say com2 sometimes it say 6......... this is unimportant.
Follow this ...this should work, the only other thing I can think of is to get into factory recovery and wipe, cache, and memory, go into advanced and wipe the dalvik, then back to Odin and perform the following:
1. Odin 1.3 or higher I use 1.7 but not real important
2. Have the original JFD Vibrant rom
3. You will need the .pit file (this is for mapping)
4. You will Eugene froyo that does not brick rom.
The order is as follows:
1. Download Eugenes 'Froyo that does not brick' file.
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Download the 'True stock 2.1 firmware for the vibrant'.
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine! You will have flashed back to the original software. From there, you can do anything !!!
Next root the phone if you are confused about this go to youtube and look up the video by unlocker.com they do a great job showing how it is done.
After all this you can now flash a new rom.
The reason he's getting a COM port without being in D/L mode is because of the secondary bootloader in the sbl.bin. You may just be able to flash JI6.tar without a pit file and get past the Setup Connection
Whoa, nice feedback.
Downloading both Eugenes "Froyo that does not brick" and the JI6.tar.
Will try both methods and reedit my post.
Thanks a lot.
I can't press "Thanks" more than 5 times a day...
UPDATE:
Eh still nothing...Odin gets stuck at SetupConnection.
I believe this will persist until I find a way into download mode. Odin recognizes phone, hence the COM6, but doesn't fully connect since it does not go beyond SetupConnection. The recovery menu also isn't functioning properly, since I can't select anything.
Losing patience with this phone...
I called T-mobile and their sending in a new one.
Told them I was updating and this happened. Do you think I'll get charged?
Well, while you still got time with it...try a different version of ODIN and see if that works... 1.0, 1.3 or 1.7 dunno if there are more
All three versions get stuck at SetupConnection.
I looked into making a JIG, but I only have one USB cord and don't wanna go through the hassle. A JIG would put my phone into download mode, right? Even though it's not really bricked, just completely messed up.
Just now I was messing around with phone, and I got to a different screen!
RST_STAT = 0x1
PMIC_IRQ1 = 0x0
(and some other stuff like that)
Then " POWER RESET OR UNKOWN UPLOAD MODE"
It shows up as COM7 in ODIN But still stuck at SetupCOnnection...grrr
I FIXED IT.
I got the android SDK, and did "adb reboot" which rebooted the phone, and I have froyo and everything.
But ONE problem. T-mobile is sending me a new phone already....what the hell do I do? I can't send this one in, because it's working now.
Nevermind, everytime I rebooted phone it stayed in recovery and I had to always do "adb reboot".
So I did abd reboot download which took me into download mode, but ODIN still stayed at SetupConnection, i took out battery, now I have the indigenous PHONE ! PC error.
NOW I HAVE NO POSSIBLE WAY TO GET INTO DOWNLOAD MODE, Nor have adb connect to phone. No devices are shown when I do "adb devices".
I also tried every variation to get into DL mode, USB, VOl +/-, Battery...etc. Now I think the phone is completely bricked, honestly.
Dark619Cloud said:
I FIXED IT.
I got the android SDK, and did "adb reboot" which rebooted the phone, and I have froyo and everything.
But ONE problem. T-mobile is sending me a new phone already....what the hell do I do? I can't send this one in, because it's working now.
Nevermind, everytime I rebooted phone it stayed in recovery and I had to always do "adb reboot".
So I did abd reboot download which took me into download mode, but ODIN still stayed at SetupConnection, i took out battery, now I have the indigenous PHONE ! PC error.
NOW I HAVE NO POSSIBLE WAY TO GET INTO DOWNLOAD MODE, Nor have adb connect to phone. No devices are shown when I do "adb devices".
I also tried every variation to get into DL mode, USB, VOl +/-, Battery...etc. Now I think the phone is completely bricked, honestly.
Click to expand...
Click to collapse
if you look at ODIN while you plug the phone in with that screen you'll notice it giving you a COM port....weird...but you can still ODIN the phone while on that screen. Flash back to JFD from there.
Yeah I know ODIN should recognize it, because it happened before and it did. But this time it's not. I tried different versions of ODIN as well.
tsk tsk ;P lol
u fixed it? or it remains broken ?
I did fix it, partially. It loaded and everything, but sound wasn't working, and volume rocker was inverted, I guess the rom I flashed was corrupted. So I did "adb reboot download" which took me to download mode to go back to JFD stock, and I did ODIN and everything but it stayed at SetupConnection again. I removed battery to put in download mode manually, and now it's bricked. PHONE /!\ PC. PC doesn't recognize it, and I tried every combo to get into download mode.
So no, it's not fixed.
So, I just got my phone back from Samsung for this issue. Start my newly returned phone up, it's running 2.2. I turn it off, hold volume buttons and plug in my USB cable - I get download mode instantly. I start up Odin 1.7, select the files and click start.
Nothing happens. Hangs up SetupConnection. I unplug the battery, then the USB cable, plug everything back in and I'm back at square one with this ****ing screen.
Last time I tried every single ****ing button combination posted on this website. I know my phone isn't hardware locked because I've never had a problem getting in to Download Mode before. Hell, I'd never had a problem with Odin not working properly before. What the hell is wrong? I have all the proper drivers installed. Why is this happening?
Now, Odin still sees my phone when I plug it in. If I click Start, sometimes it hangs on SetupConnection, sometimes it hangs on Initialization. I've read that you should still be able to flash while on this screen? Is this true? Either way, I think I'm ****ed again. Any help?
Also, I've read that maybe a jig will help get me in to download mode? Where can I buy a jig from?
you can go to stock jfd from that screen, it acts like download mode.
Once on jfd, download mode will work fine.
try the files in my going back to stock... also make sure to remove any other usb components (they can cause odin to hang).
I love you.
Something must be wrong with the files on my desktop, or perhaps the other USB cable I'm using is ****ed.
This is a bit embarrassing. For some reason I can't get root. I can get in to recovery and select reinstall packages, but every time it boots right back in to the OS. Any hints? Never had this issue before.
EDIT: So it looks like I have Superuser installed but since I can't get into Clockwork I can't flash any roms. What's going on? I can't find any other links where people couldn't get in to Clockwork.
EDIT2: Well, I installed ROM Manager and used it to "flash" CWM. Reinstall Packages worked this time it seems. Weird. Anyway, thanks for the help!
Cool, glad you were able to get it all sorted.
I was in the process of flashing back to GB in ODIN when it froze on flashing the Modem. Now the phone does nothing. Black screen. Plug USB in and computer doesn't know its there, Download mode will not work, nothing works.
Will a usb jig get it back into download mode so I can try flashing again or is this thing straight gone?
Thanks.
Yes, a USB jig will work.
MultipleMonomials said:
Yes, a USB jig will work.
Click to expand...
Click to collapse
Well I built one and tried it... No go. Nothing happened. Blank screen.
BTW the battery was fully charged right before it bricked so I know the battery isnt dead.
Was the phone on when you plugged it in?
I fixed it. Had to do the Unbrickable Mod. Was a pain in the butt getting the contact pads jumped. Once I got it I was able to get into download mode with the supplied programs and flash back to stock.
Nicely done.
Well I jinxed myself. I went to flash a new ROM and now im stuck on the Samsung Logo. Using the previous method does no good. Just stuck on Sammy logo. I found a different Heimdall One-Click now but it fails to flash Modem and now it vibrates 3 times when the sammy logo is shown.. over and over... so its in a boot loop I take it? If I 3 finger it it shows the stock recovery but I am unable to move up or down in recovery. It just stays on the reboot device selection.. im able to select that with the menu softkey thats it. The vol up and down and power buttons do not respond in recover. Updating the Modem is what started this whole mess for me. When I originally was flashing this the other day ODIN froze on flashing Modem, that put me in a hard brick state requiring me to do the Unbrickable Mod. I got it out of that with ED05 Heimdall Once-Click but since then I have not been able to get it out of this soft brick. My galaxy just wont let me win. :-(
Have you tried using One-Click Resurrector?
MultipleMonomials said:
Have you tried using One-Click Resurrector?
Click to expand...
Click to collapse
Ya, thats how I get it into Download Mode... its the Only way I can get it into download mode actually.
Both Odin and Heimdall are having trouble flashing the phone in windows. Both recognize the phone and connect but will not flash anything. They just sit at uploading PIT/Setting Partitions.
The ED05 Heimdall One-Click in linux flashes the phone with success's accross the board but the phone just sits there on the samsung logo... no vibrating, no recovery, and unable to charge the battery. If I use the EH03 Heimdall One-Click in linux it will flash all the way til it gets to flashing Modem but then fails and the phone is stuck in bootloop on the samsung logo vibrating 3 times over and over. It can also get into the stock recovery but im unable to move up or down the menu. Volume buttons have no effect. The phone will now charge though. Full battery as of right now.
I tried using Odin and Heimdall on another windows computer and they will not move past setting Partitons/uploading PIT either. SO I know there isnt a conflict with my computer.
I would like to try a manual flash in Heimdall Front-End in linux but I have no clue how to install it in Linux. I hate that command line stuff. I guess I have to figure it out though if Im going to try it.
OK, success!
I am now back to stock. I was able to run Heimdall in linux and flash CWM recovery. I was able to get into the recovery and make selections in recovery with the volume buttons. I selected reboot in download. I went to Odin and tried flashing a stock EH03 rom and it worked.... I think the reason I couldnt do that before was because i was holding the power button down to keep it in download mode since that is what is required when in download mode via the unbrickable mod.
The windows based programs must not have liked me holding that power button. Weird. Anyways its working.. now on to getting this thing updated.
im having a similar issue, i can get into cwm, can use download, but when i try using Odin for the stock eh03 it instantly says all threads completed succeeded 0 failed 0. when i reboot in cwm it just takes me to samsung logo wont go any further
Try heimdall.
Ya Heimdall in linux will surely give you a win.
I tried to flash STOCK ROM. In first attempt, Odin messaged failed. Then I again tried it. Now All thing goes smooth. But when phone is restarted, It doesn't installs anything. And opposite of it shows only samsung vibrant and goes black. I did this couple of time but always same thing.
Now, when I charge phone then it shows up big grey change sign(not green status inside) in loop. And If I press power button, phone shows samsung vibrant and goes black.
After unsuccessful attempt with ODIN, I tried with heimdall. But Heimdall always complains "Failed to detect compatible download-mode device."
Is my vibrant is Hard Bricked. Phone could be sent to download mode by removing battery, holding UP + Down, plugin USB and adding battery back. But Could not go to recovery mode.
Are you sure you used BOTH of the CORRECT files in Odin?
I approve this message.
Try the Tar and Pit from here: http://forum.xda-developers.com/showthread.php?t=1319802
Hello there,
I was trying to flash Rj's Custom Kernel to my Glaaxy Player 5 which I had just rooted using SuperOneClick.
I went into download mode (Power+Volume-down+Back button) on my phone, opened up Odin and selected the tar file I downloaded as a PDA, Only Auto Reboot and F. Reset Time were checked, nothing else was changed.
Clicked Start and the process appeared to go Successfully in Odin, when the phone was reset the Samsung Logo appeared for longer than usual, and my computer (which was still connected via USB) complained that the USB device was not recognised, then eventually the phone rebooted to the Samsung Logo and the process repeats itself ad infinitum.
The only thing I can do is get the phone back into Download Mode, and flash another rom, but I don't know what to try, can anyone please help me get my phone back to working order?
Cheers,
Blaiz0r.
Blaiz0r said:
Hello there,
I was trying to flash Rj's Custom Kernel to my Glaaxy Player 5 which I had just rooted using SuperOneClick.
I went into download mode (Power+Volume-down+Back button) on my phone, opened up Odin and selected the tar file I downloaded as a PDA, Only Auto Reboot and F. Reset Time were checked, nothing else was changed.
Clicked Start and the process appeared to go Successfully in Odin, when the phone was reset the Samsung Logo appeared for longer than usual, and my computer (which was still connected via USB) complained that the USB device was not recognised, then eventually the phone rebooted to the Samsung Logo and the process repeats itself ad infinitum.
The only thing I can do is get the phone back into Download Mode, and flash another rom, but I don't know what to try, can anyone please help me get my phone back to working order?
Cheers,
Blaiz0r.
Click to expand...
Click to collapse
Does your player have a mechanical home button because if it has a home button that is a light capacative and also if its capacitive you need entropeys kernel search on google