recently, I used condi's AIO tool (fantastic work,condi) but I had a few questions:
1. I've enabled wifi adhoc, does that mean that I can connect to adhoc's or make one? if I can make one, then where is the option in settings? shouldn't it come there?
2. I've also installed the modded play store. now, everytime I reboot, my tablet shows the old market and after 3-5 mins, changes back to the play store. is this normal?
Advice would be appreciated! I'm running 3.2 , with backdoor,root and a few other nifty tweaks. I'm also in india and bought the tablet from here too.
thanks,
xyan
Not sure about your Market problem, but the adhoc patch adds support for connecting to existing adhoc networks, not creating new ones. If you have a 3G version, you might be able to use the native Wi-Fi hotspot support for an adhoc connection, but otherwise I'm not aware of any way to create an adhoc network from the Tablet
Thanks! I think ill undo what was done using the AIO tool.
Related
My new Touchpad don't seem to support ad-hoc wireless networks. It don't see them or let me join them by entering the SSID (network name) and password. Is there any software I can add or configuration change I can make to change this? I have a Windows Mobile cell phone that can share its connection over wifi, but its ad-hoc only and I use WEP.
Any ideas on what to do about adhoc networks? Any hacks or sideloaded software, if no official apps?
This KILLED me. I bought mine over the weekend while I was on vacation and the hotel had a catch-all page so I couldn't get through registration from that network. I figured no big deal and turned on my hotspot (Moto Photon) and it wasn't showing up. I configured a wifi shared connection on my laptop and it didn't show up. I thought I was insane! Ended up getting annoyed and driving up the road until I found an open network without a catch-all... My wife drove while I scanned for a connection. I know for a fact that they work with the Palm Pre's shared connection. What's up with the haterade HP?
I have an original droid and have this same issue as I understand cyanagen mod allows you to create a non ad hoc WiFi but I can't get a clear answer on this
So far I could not find an app or hack to allow the Touchpad to connect to an adhoc wifi either. I too have a WM phone (HD2). Unfortunately there is also no app for the WM phone that would allow it to broadcast infracstructure (non-adhoc) wifi.
Dissenter said:
This KILLED me. I bought mine over the weekend while I was on vacation and the hotel had a catch-all page so I couldn't get through registration from that network.
Click to expand...
Click to collapse
I had this problem also, but you can still make it work. Goto your networks wifi setting and flip the auto switch and wait. It takes some time (almost 5min for me) but it'll pickup the ip address and finish loading the setup pages.
I am trying to use my TP with the wifi from my Touch Pro 2. Any help would be appreciated.
This is a real let down, no ad-hoc support. And our WinMo phone and Motorola Triumph do not support Infrastructure mode.
SoftAP appears to be a requirement to tether with android phones.
Unfortunately my Galaxy Spica does not have this so until some wonderful magical person creates an app/patch which allows the Touchpad to Bluetooth tether or utilise ad hoc wifi networks my tablet will be housebound
also need help with HTC HD2 on winmo 6.5 tethering adhoc with touchpad.
i guess the more realistic solution will be HD2 running android?
For you rooted android phone users http://forum.xda-developers.com/showthread.php?t=1238382
I'm really annoyed about this. One of the main things I thought of when buying the touchpad was to tether it to my winmo phone and browse the internet on the move. I hope someone creates a patch soon to enable adhoc wifi.
Really disapointed that I can't tether my iphone 4 to my touchpad.
For the price I can live without gps, sd/micro sd card slot, usb but the not being able to tether this thing is a deal breaker for me.
All I wanted to be able to do with my touchpad is tether for mail, browse the web, music, and be able to watch movies and it seems this thing falls short on everyone of the fronts.
I wonder if its likely anyone will release a patch for WebOS to allow it to recognise and use AdHoc networks?!
Just upgraded my Samsung Galaxy Spica to 2.2 Froyo using kitchen - Enabled portable Wi-Fi Hotspot from the settings menu and now it works perfectly (open or with WPA2 PSK encryption)
Appears this was the only way to get it to work for me as the touchpad was not detecting the adhoc connection on 2.1.
for those with the HD2, try using MCCM HD v6 DESIRE ROM. I can tether to my touchpad with no problems.... first try, no setting tweaks or anything...
Through my searching it was my understanding that Ad-Hoc support could be injected to the touchpad, is there any progress on this front to make it more user friendly? It was pretty heavy linux speak.
Most of the threads I've seen are focusing on Android development for support. What about the webOS side of things?
This is what I'm referencing:
webos-internals
.org/wiki/Ad-Hoc_Networking*
Is there some reason this isn't a viable option? the signal issues? Seems if the method is there than all that it needs is to be more user friendly...
*argh! too newb to post links
CarbolDroid said:
Through my searching it was my understanding that Ad-Hoc support could be injected to the touchpad, is there any progress on this front to make it more user friendly? It was pretty heavy linux speak.
Most of the threads I've seen are focusing on Android development for support. What about the webOS side of things?
This is what I'm referencing:
webos-internals
.org/wiki/Ad-Hoc_Networking*
Is there some reason this isn't a viable option? the signal issues? Seems if the method is there than all that it needs is to be more user friendly...
*argh! too newb to post links
Click to expand...
Click to collapse
I tried what was described in the thread a few days ago. Ran into issue when trying to execute
/usr/sbin/wifidriver -i
no such file exised....
I have a Samsung Charge with Gummybear. I could not tether at first. I went to the tethering settings and changed the profile to a Samsung Fascinate. Then changed the Setup-Method to softap for Samsung (master). This did not work at first then I shutdown (using the task manager) the tethering app and restarted. Turned my wi-fi on the touchpad off, then on, and my SSID came up. Clicked connect and went to access control and approved my touchpad connection. Now it works.
Hope this helps someone.
Just a heads up for anyone using an iphone 4 with their touchpad.
If you upgrade to ios 4.3.3 or later you can enable wifi hotspot and this hotspot will thether with the touchpad without issue.
I was running ios 4.1 trying to use mywi without success and then decided to try this method and works like a charm.
First off, my laptop works fine with my phone's ad-hoc tether, but i want to use internet on my psp and vita later down the road as well when i need it, but i can't find any way to tether my X10 other than in ad-hoc mode, which is not supported by most consoles/handhelds.
i found a few guides but it wouldn't work. Would either not broadcast anything or do ad-hoc mode with various apps.
Any way to tether X10 in infrastructure mode instead of ad-hoc?
Ok, so i tried everything and only phone's native tether (under settings, stock ROM latest updates) gives infrastructure, or at least what seems like it, problem arises when i want to access internet and get DNS server error... there are pretty much no settings to mess with there so i am at a loss really. USB tether gives no internet to my laptop either over the native tether under settings.
wireless tether for root users does however work perfectly, but only in ad-hoc mode. The beta version people use on different phones (change device profile select one of the master methods and go) to get infrastructure instead of ad-hoc doesn't work at all, i haven't tried all profiles but on few i tried even though app says tether is on no devices see it, SSID broadcast set to ON.
So any ideas? Could it be provider nonsense? i bought it second hand and it seems to have been unlocked from Orange, but ROM doesn't seem to have all the bloatware from Orange(just news and traffic pretty much) without that I wouldn't even have noticed that it is from Orange.
Would flashing a different ROM help? could it be Orange's ROM is blocking it? Otherwise i might need a new phone
Android isn't able to detect ad-hoc network. There is a program called "connectify" to make discoverable version of ad-hoc for android devices
jakuburban said:
Android isn't able to detect ad-hoc network. There is a program called "connectify" to make discoverable version of ad-hoc for android devices
Click to expand...
Click to collapse
I want to tether my ps vita and my laptop to my SE xperia X10. i use tether app on my phone to share phone's internet with my console and laptop when i am not home.
also on my laptop i got intel's my wifi app that allows me to rebeam/share internet which is sufficient for my need on my laptop, though thanks for the tip
problem is making my phone tether in infrastructure and not ad-hoc mode. i gone in as much depth as i can about it in the last post, though if you need any more info i'd be glad to provide it if it would help to find a solution...
It is just a stock Xperia X10 with all official updates and rooted... 2.3.3android 2,1,71baseband.
would using a different rom help?
un4tural said:
I want to tether my ps vita and my laptop to my SE xperia X10. i use tether app on my phone to share phone's internet with my console and laptop when i am not home.
also on my laptop i got intel's my wifi app that allows me to rebeam/share internet which is sufficient for my need on my laptop, though thanks for the tip
problem is making my phone tether in infrastructure and not ad-hoc mode. i gone in as much depth as i can about it in the last post, though if you need any more info i'd be glad to provide it if it would help to find a solution...
It is just a stock Xperia X10 with all official updates and rooted... 2.3.3android 2,1,71baseband.
would using a different rom help?
Click to expand...
Click to collapse
Well, sorry but I don't know how to do that, but changing ROM won't help
un4tural said:
I want to tether my ps vita and my laptop to my SE xperia X10. i use tether app on my phone to share phone's internet with my console and laptop when i am not home.
also on my laptop i got intel's my wifi app that allows me to rebeam/share internet which is sufficient for my need on my laptop, though thanks for the tip
problem is making my phone tether in infrastructure and not ad-hoc mode. i gone in as much depth as i can about it in the last post, though if you need any more info i'd be glad to provide it if it would help to find a solution...
It is just a stock Xperia X10 with all official updates and rooted... 2.3.3android 2,1,71baseband.
would using a different rom help?
Click to expand...
Click to collapse
[ROM] Wolfs TW Gingerbread | Feel the difference | V7b6 [stable] | 03/12/2011
^ This rom supports infrastructure mode tethering.
I am in the same boat as you friend but I want a different custom rom. I have upgraded my touchpad to ICS which has no support for ad-hoc networks.
I was using the stock rom above for awhile which supported infrastructure mode which was working perfectly but in my world I want to stick with Miui on my x10.
I updated the wifi teather app on the miui rom to the newest one and was playing with the different setting for different devices. I was able to get the tether app to start in master mode with some of the settings for other devices but I was never able to get the touchpad to fully connect to one of these networks. I had it connect briefly when I put a static ip matching the settings on the wifi tether app but it would not make any internet connection.
If we have the ability in a stock rom, why can't it be ported?
I flashed Scott's Cleanrom ICS 4.2 and followed his instructions for the wireless tether.
When I go through all of that shouldn't I be able to go online with my laptop through the wireless tether on the phone? When I go into the available wifi networks my phone doesn't show up on the list.
Am I not understanding how this works?
Thanks-Dan
C'Mon guys, help a brotha out. 175+ views and no replies?
Thanks-Dan
Well, the answer is.... yes, probably. I'm not running that ROM at the moment, but ICS gave us the ability to tether in infrastructure mode, rather than merely ad hoc.
Having said that, there are variables out there that may be causing the issues you are having. I'm sure you have double-checked the settings and have set up wireless tether per Scott's instructions. So, here are your options (IMHO):
1) Try to find another tether app (such as Barnacle) to see if that might work.
2) Try to find an updated or different version of WiFi Tether.
3) Try the many different settings in WiFi Tether to see if they work for you.
4) Try a different ICS ROM to see if it works for you. (RezROM ICS does work for me)
5) Pay for Verizon's Hot Spot.
Good luck!
Thanks for the reply. I will triple-check all the settings again and go from there.
I had a similar problem - I was unable to see my wifi network until I renamed it.
Sent from my ADR6425LVW using XDA
The way I make it work was renaming the SSD and creating a password.
Sent From Ice Covered Blasting ReZound
TRY THIS
Go to www.downloadandroidrom.com scroll down to apk and click on it.
Next click on wifiteather.
Next click on wifi_teather_v3_0-pre14.apk
Close to the bottom of the page will be a Download Here link click on it.
If your using a PC place it on the root of the sd card if your using your phone make sure unknown sources is checked in the settings>applications menu.
Next go to the market and download and install apk installer.
Open apk installer on your phone and click on <ext_sd>
Next click on wifi_teather_v3_0-pre14.apk and click install.
After it installs click open and go to the menu sceen.
Go to settings and check Routing fix.
Next click on the access control and press on enable.
next click on the main screen to start wifi tether and click allow access from superuser.
Now check your wifi on your computer Android Tether should come up click connect.
Now on your phone go back to access control and your computer name should come up.
Click on your computer name and click apply on the bottom of the screen.
This sounds like a lot but it works.
Thanks guys, I had to rename the network and set the security. I thought I could just leave it unsecured but I guess not. It works now...
Thats good I never had to do that. But that is the only reason why I rooted my phone was for the wifi tether.
But ...
... Do any these options allow other mobile devices to see your hotspot? I'm running stock on my rooted Rezound. I tried WiFi / Wireless Tether, Barnacle, Open Garden, etc ... They let my laptop connect, but not mobile devices. I actually like Sense, and I don't really want to bother with other ROMs right now ...
Any ideas?
bloodymurderlive said:
... Do any these options allow other mobile devices to see your hotspot? I'm running stock on my rooted Rezound. I tried WiFi / Wireless Tether, Barnacle, Open Garden, etc ... They let my laptop connect, but not mobile devices. I actually like Sense, and I don't really want to bother with other ROMs right now ...
Any ideas?
Click to expand...
Click to collapse
The only two ways I was able to achieve wireless tether with infracture mode was to buy the vzw hotspot feature and / or install an ICS ROM. I can attest that RezROM ICS handles the free wireless tether app flawlessly for me (after which I killed the VZW premium service).
Does anyone know any apps that creates a Wifi AP? I am not talking about an Adhoc network that all apps I have used create, I want it to work like native tethering.
I am asking because I am using polish blood preRC, and I really want to use it full time, the only thing is native tethers do not work and all apps create an Adhoc network.
Normally this isn't a problem, however I wish to use my PS3 over my phone's 3G connection, this is where the problem comes in, the PS3 does not see Adhoc networks so most, if not all tether apps will not work.
I have tried to use connectify while I have a usb tether connected however the PS3 cannot connect to the internet, I also would prefer to avoid using my laptop as an AP.
So anyone know a decent Wifi tether app that will create an AP like native tethering, not an Adhoc network
Are you sure that PS3 cannot connect to Ad hoc networks?
Here is an article about it http://www.ehow.com/how_6808376_can-connect-ad-hoc-network_.html
and it says PS3 can connect to Ad hoc networks.
Check if you configured everything properly.
Also Wireless tether app supports AP mode but only on certain handsets (HTC Evo 3D for example). It looks like it doesn't support our device.
Mine has never seen an adhoc network from my phone, guess I'll check it tonight when I can get on it.
Sent from my LG-GT540 using XDA
Check wifi channels, anything between 1-11 channel will work.
delsus said:
Does anyone know any apps that creates a Wifi AP? I am not talking about an Adhoc network that all apps I have used create, I want it to work like native tethering.
I am asking because I am using polish blood preRC, and I really want to use it full time, the only thing is native tethers do not work and all apps create an Adhoc network.
Normally this isn't a problem, however I wish to use my PS3 over my phone's 3G connection, this is where the problem comes in, the PS3 does not see Adhoc networks so most, if not all tether apps will not work.
I have tried to use connectify while I have a usb tether connected however the PS3 cannot connect to the internet, I also would prefer to avoid using my laptop as an AP.
So anyone know a decent Wifi tether app that will create an AP like native tethering, not an Adhoc network
Click to expand...
Click to collapse
Don't use this ICS. It's still in very early stage of developement. It's only for money.. If you really need a ICS on your Swift, then try AOKP 4.0.3. by DevSwift. Probably an update will come very soon. I was using it on my swift for 1-2 weeks, and I was happy with it. Now I changed the whole phone.
Maczuga said:
Don't use this ICS. It's still in very early stage of developement. It's only for money.. If you really need a ICS on your Swift, then try AOKP 4.0.3. by DevSwift. Probably an update will come very soon. I was using it on my swift for 1-2 weeks, and I was happy with it. Now I changed the whole phone.
Click to expand...
Click to collapse
It's wrong to say its for money.....all he does is a dedicated ftp server for donators....and a bit delayed public release.
Sent from my GT540 using xda premium
Back on topic, ps3 definitely will not see an adhoc network, just tried and when I scanned it didn't pick it up, when I entered my ssid manually it said it could not find it.
Any suggestions are appreciated.
Sent from my LG GT540 Swift using XDA
delsus said:
Back on topic, ps3 definitely will not see an adhoc network, just tried and when I scanned it didn't pick it up, when I entered my ssid manually it said it could not find it.
Any suggestions are appreciated.
Sent from my LG GT540 Swift using XDA
Click to expand...
Click to collapse
Sorry for the mislead, PS3 doesn't work with ad hoc networks.
But here is a possible solution:
1)Download latest WiFi tether beta http://code.google.com/p/android-wifi-tether/downloads/detail?name=wifi_tether_v3_1-beta11.apk
2)Open it and then go to Settings
3)Change Device-Profile to Google NexusOne
4)Change Setup-Method to Netd (master)
5)Start tethering and that's it
Note: I haven't tested this on Mike's CM9 but it did work on CM7, so try it, and tell us if it works.
Just to warn you there is probability to get kernel panics with this settings.
EDIT: I have tested this on Mike's CM9 and can't get it to work. Simply wait till Mike fixes WiFi tethering, or flash CM7 or some other ROM.
You can try a couple of options...
1. Hosted Network Starter
Free: Simple hostpot on your pc with non configurable DHCP
www.nirsoft.net/utils/wifi_hotspot_starter.html
2. WiFi Tether Router
Paid: Android app for rooted phones with full featured DHCP, VPN, etc
https://play.google.com/store/apps/details?id=net.snclab.wifitetherrouter
Pick your poison
Hi,
My apologies if this is the incorrect section. I know the Virgin Mobile SGS2 is NOT the I9100 model, however the correct phone was not listed on this site (nearest is the T-Mobile model, but the options differ on their phone).
I'm experiencing an issue with trying to enable the wireless hotspot option for my phone. In every instance I have tried, I have received errors that ad-hoc failed to start and related problems. Let me make it clear that this version of the samsung galaxy DOES NOT have the option to turn on wireless tethering in the native settings menu (it's simply not there). My carrier most likely hid the option because it is an extra $15 a month to use the feature. I can, however, attempt to start the hotspot service with a third party app, but it runs for no more than 3 seconds and I get error 67:" Unable to connect to data network, turning off Hotspot..."
My phone is rooted and I have full access to edit system files (I did so to remove the ear-piercing camera shutter noise). I am using the stock rom and do not intend to flash a different rom to this phone. To lessen redundant suggestions that have been said hundreds of times and have failed to fix my issue, here is everything I have done:
Attempted to use FoxFi. All this app does is start the native hotspot capability on your phone, so I got the same error 67. No network connection. The network only appears for a split second when enabling the native hotspot setting, but since the phone turns it off, I can't connect to it.
Attempted to use Barnacle. I receive the error "Could not set ad-hoc mode of wlan0: Operation not supported on transport endpoint."
Attempted to use Wifi Tether for Rooted Users (for some reason this app is listed as "Not Compatible" for my phone in Google Play). Again, I receive an error that setting ad-hoc failed. All other services start successfully though, but the network does not appear for my PC to connect to.
Checked to make sure my 3G/4G is actually on and functioning.
Despite all this, I CAN utilize the USB tether feature just fine in PdaNet. It's the wireless hotspot that is eluding me. I know that flashing a different rom can get me around this issue, but I really would prefer to resolve this problem without doing that if it's possible. One thread I read said something about editing a .db file, but it was for an HTC phone and I'm a little wary to try it on my phone. I'm sorry for coming off rather cross, but I'm just a bit frustrated as every solution I find never works. It seems like this would be a simple thing to do. Is there a system file I can edit that will allow my phone to enable its native hotspot capabilities? Or something that will resolve the ad-hoc issue? Or am I blindly over-looking something obvious? If nothing will work except for flashing, then hey, at least I tried. It's not going to kill me if I can't get the wireless tethering to work, but it was one of the reasons I wanted to root my phone.
Any help would be greatly appreciated. Thanks in advance!
I randomly figured out the problem myself. Downloaded something on a whim and it actually worked. Let me go through each step so anyone else who has this same problem can try this out.
The majority of what I did can be followed here:
*Can't post the link. Thank you, forum restrictions... It's from a website called "highonandroid.com" so google that with the appropriate keywords (wifi tether, android, etc.).
But in case the link goes dead or something like that, here is a step-by-step reiteration:
1. Download Trev-E's mod for the Wifi Tether for Root Users app. I have the exact version I used attached to this post.
2. Install it, and immediately go to settings and make the following adjustments:
- Change device profile to "Generic ICS/JB (wlan0)."
- Change setup-method to "Netd-Ndc (master)."
- Tick the option "Send Netd Max Client Cmd."
- Tick "Wifi driver reload." The second one did not work for me, but try it if the first reload does nothing.
- Although the original tutorial says to tick "MSS clamping," this option is not available on my phone. But this did not stop the app from working.
3. Exit settings and hit the wifi icon. Fingers crossed it works for you!
After doing that, the app showed no errors in the log, the network name appeared on my computer, and I was able to connect effortlessly. Most importantly, the internet worked!
Also, enabling/disabling the tether DID NOT break my phone's wifi or 3G service. Everything ran fine when I stopped using the app and I didn't need to restart my phone. Putting this out there because I know some phones will trip out when enabling this feature. Good luck! And big thanks to xda's Trev-E for the app.
Thank you! That was driving me nuts trying to tether my GS2 to my tablet. I dont have the clamping option either but its working perfectly when nothing else has.
Nice instructions. I rooted my phone today (root virgin), downloaded the trev-e you have linked and got it to work. (Virgin Mobile Samsung Galaxy SII 4G)
I then tried to use encryption and the phone was just not having it, the internet connection wouldn't work anymore (laptop was connected but said there was no internet access). Frooze up the phone, had to reboot, frooze again, reboot, turn the feature off, freeze, reboot, pull battery etc etc. Finally have it working again with encryption off.
Pretty happy to have tethering working, but wish I could encrypt it haha.
Do I have the wrong TrevE using the stock ROM? (using the TrevE linked in this thread).
Now to learn what else to do in the wonderful world of being rooted...
*** EDIT- Looks like installing busybox fixed the issue!!
Thanks!
Awesome work, follow the instructions if you have virgin mobile it will work perfectly