Related
I did some searching around the forums and couldn't find anything specifically addressing how to use NVFLASH. Is there a special function it serves? Is there a guide detailing how to use it?
cafe. said:
I did some searching around the forums and couldn't find anything specifically addressing how to use NVFLASH. Is there a special function it serves? Is there a guide detailing how to use it?
Click to expand...
Click to collapse
"For those of you who don’t know about NVflash this is the ultimate tool for recovery and flashing roms. This tool can bring your device back from the dead in most any situation, even those hard to fix corrupted bootloader issues. It will allow full recovery of device, backup of all partitions on device and individual flash of partitions."
Taken from:
http://www.tabletroms.com/index.php/2011/06/12/official-nvflash-recovery-rom-asus-transformer-released/
Thank you. Although, I was looking for an explanation for the Atrix.
cafe. said:
Thank you. Although, I was looking for an explanation for the Atrix.
Click to expand...
Click to collapse
It's a NVidia tool and is used for devices with NVidia processors in them. Not specific to the Atrix.
CaelanT said:
It's a NVidia tool and is used for devices with NVidia processors in them. Not specific to the Atrix.
Click to expand...
Click to collapse
So how can and ATRIX 4g user utilize NVflash to restore to stock? Any tutorials that I'm missing?
mynameisj said:
So how can and ATRIX 4g user utilize NVflash to restore to stock? Any tutorials that I'm missing?
Click to expand...
Click to collapse
Well actually you can't use it because you probably don't have SBK (Secure Boot Key), nvflash crypts comands whit SBK and if the SBK isn't provided it terminate session and shutdown your atrix.
But if wee could get SBK from Motorola then all hard bricked atrix can bee recovered or maybee wee can port WINDOWS 8 RT to atrix.
firecode95 said:
Well actually you can't use it because you probably don't have SBK (Secure Boot Key), nvflash crypts comands whit SBK and if the SBK isn't provided it terminate session and shutdown your atrix.
But if wee could get SBK from Motorola then all hard bricked atrix can bee recovered or maybee wee can port WINDOWS 8 RT to atrix.
Click to expand...
Click to collapse
Ah OK. It would be great to be able to do that. I always wondered why we haven't been able to but I suppose that it's Motorola's lockdown and NOT an Android thing...
Motorola Atrix 4G Stuck on Main UNLOCKED Screen
mynameisj said:
Ah OK. It would be great to be able to do that. I always wondered why we haven't been able to but I suppose that it's Motorola's lockdown and NOT an Android thing...
Click to expand...
Click to collapse
Hi guys, I'm a new user here. I've tried to install a new cyanogen rom on my ATRIX and for some reason got stuck on the main Unlocked screen where it keeps looping over and over and it doesn't go anywhere. I've tried to enter the ANDROID RECOVERY mode in order to swap and reset it, but it doesn't allow me to. Can anyone help me, please? I don't really know what to do. I hope I can find some clues here, it is my only chance.
ricardorb2000 said:
Hi guys, I'm a new user here. I've tried to install a new cyanogen rom on my ATRIX and for some reason got stuck on the main Unlocked screen where it keeps looping over and over and it doesn't go anywhere. I've tried to enter the ANDROID RECOVERY mode in order to swap and reset it, but it doesn't allow me to. Can anyone help me, please? I don't really know what to do. I hope I can find some clues here, it is my only chance.
Click to expand...
Click to collapse
No. You are spamming multiple threads b/c you are panicing. Go back to your thread you started an hr ago.
Sent from my MB886 using xda app-developers app
I am on vacation and my fassy decided to stay in recovery upon boot. It gets stuck in boot loop. I'm running AOKP Build 30 w/ Glitch. My fiance has a macbook with her however, everything I've read says that we can't use Mac for rooting or restoring fassy's. Is there anyway to get out of the boot loop with an option in clockwork. From what I understand we can't use the two button hard boot with ICS roms. I could use some help, I'd rather not be without my phone for a week.
Thanks guys
Keuka79 said:
I am on vacation and my fassy decided to stay in recovery upon boot. It gets stuck in boot loop. I'm running AOKP Build 30 w/ Glitch. My fiance has a macbook with her however, everything I've read says that we can't use Mac for rooting or restoring fassy's. Is there anyway to get out of the boot loop with an option in clockwork. From what I understand we can't use the two button hard boot with ICS roms. I could use some help, I'd rather not be without my phone for a week.
Thanks guys
Click to expand...
Click to collapse
Is there anyway to access a Windows computer? With Parallels, VMWare, a virtual computer lab, or something else?
If so, follow http://forum.xda-developers.com/showthread.php?t=1238070
If no, Hiemdall http://www.glassechidna.com.au/products/heimdall/
Goodluck
Apparently there's no driver for samsung fascinate with mac connectivity. I downloaded Heimall and the full tar package but didn't work. Does anyone know how to generically attatch my phone to the computer. Someone said something about a generic connection as a drive that works with heimall. I'm pretty pissed and can't seem to get this work. I'll pry end up just going down to a lab and hogging that for thirty minutes or so.
Heimdall has its own driver. It'll be in the driver folder in the suite. Also I'd use an older version of heimdall suite if you can. The newer version tried to streamline things but ended up being a downgrade IMO.
Sent from my SCH-I500 using xda premium
I tried to use Heimdall but couldn't locate the driver. I then located a "exitrecovery.zip" that was supposed to be flashed in cwm. I used my gf's phone to download it then switched sd cards and that didn't work. Still stuck in cwm loop. I can't get to a pc where i can download Odin software to. There's no other flashable file i can find to help me get out of this loop.
look at section 9 of my guide...I always keep a cm7 rom on my sd card just incase this happens!
Can I flash a cm7 rom if i'm stuck on a cm9 bootloop??
Keuka79 said:
Can I flash a cm7 rom if i'm stuck on a cm9 bootloop??
Click to expand...
Click to collapse
READ section 9 of my guide in the general section...
droidstyle said:
READ section 9 of my guide in the general section...
Click to expand...
Click to collapse
Thanks man, I got it to work. I'm surprised I didn't think of that before.
You're a life saver man.
No problem, glad to see you got things back up and running!!
I am ready to break something!!!
OK, after spending over a day reading and trying different things to no avail, my brain is a jumbled mess
i have a 16gb NT it was updated to the 1.4.3 when i started. I rooted it using indirect/brianf21 sd card method. everything worked fine for the little bit that i messed with it in this state. i then moved on to Veronica's CM7beta_ribbon_ICS rom for the most part everything was working. I installed a few apps from the market and on a reboot i got stuck in a bootloop. powered off, bootloop again. so i booted into CWM and tried reflashing the ROM only to be met with the 'please restart you device' screen. its all downhill from there. i can currently boot into CWM internally and have tried many different methods. so right now i dont get the 'restart' screen as it just goes into CWM. I have never worked with ABD but have been fighting drivers trying to get my nook to show up and having no luck so that i might try something there. i am new to rooting on the NT but have rooted and flashed different roms to my phone so i feel i have a basic concept. i dont know if im having so much of an issue cuz of the 1.4.3 or what **sigh**
I am now defeated and am in need of some help!!! haha! if anyone has anything to offer i would be so very thankful!
neonblur said:
I am ready to break something!!!
OK, after spending over a day reading and trying different things to no avail, my brain is a jumbled mess
i have a 16gb NT it was updated to the 1.4.3 when i started. I rooted it using indirect/brianf21 sd card method. everything worked fine for the little bit that i messed with it in this state. i then moved on to Veronica's CM7beta_ribbon_ICS rom for the most part everything was working. I installed a few apps from the market and on a reboot i got stuck in a bootloop. powered off, bootloop again. so i booted into CWM and tried reflashing the ROM only to be met with the 'please restart you device' screen. its all downhill from there. i can currently boot into CWM internally and have tried many different methods. so right now i dont get the 'restart' screen as it just goes into CWM. I have never worked with ABD but have been fighting drivers trying to get my nook to show up and having no luck so that i might try something there. i am new to rooting on the NT but have rooted and flashed different roms to my phone so i feel i have a basic concept. i dont know if im having so much of an issue cuz of the 1.4.3 or what **sigh**
I am now defeated and am in need of some help!!! haha! if anyone has anything to offer i would be so very thankful!
Click to expand...
Click to collapse
in order to get drivers working while in recocery mode you need to find the product id of the nook while its in cwm. in windows you need to go to device manager and check to see if your nook shows up in "other devices". then right click and go to properties and go to the tab that relates to hardware and find the neccessary info.
after that you should see two lines. ypu need to copy those two to the android_win.inf and modify the lines in there with notepad or something.
then try installing drivers and it shouls pick it up
Sent from my Nook Tablet CM7 BETA using xda premium app
ShinnAsuka said:
in order to get drivers working while in recocery mode you need to find the product id of the nook while its in cwm. in windows you need to go to device manager and check to see if your nook shows up in "other devices". then right click and go to properties and go to the tab that relates to hardware and find the neccessary info.
after that you should see two lines. ypu need to copy those two to the android_win.inf and modify the lines in there with notepad or something.
then try installing drivers and it shouls pick it up
Sent from my Nook Tablet CM7 BETA using xda premium app
Click to expand...
Click to collapse
thanks for the reply. ok my nook is showing up as a mass storage device under other devices but is also showing up under android phone as 'android composite ADB interface' and also under portable devices as 2 drives G: and H: both unclickable. when i right click the android phone i get a hardware tab but all i see there is device functions and device functions summery so im not sure of the info that you are referring to that i need. i have been at this all day and apologize if i am missing something because im tired haha. the other file i found was called android_winusb.inf, is this the right one? thanks again for your help!
neonblur said:
thanks for the reply. ok my nook is showing up as a mass storage device under other devices but is also showing up under android phone as 'android composite ADB interface' and also under portable devices as 2 drives G: and H: both unclickable. when i right click the android phone i get a hardware tab but all i see there is device functions and device functions summery so im not sure of the info that you are referring to that i need. i have been at this all day and apologize if i am missing something because im tired haha. the other file i found was called android_winusb.inf, is this the right one? thanks again for your help!
Click to expand...
Click to collapse
yea that inf file is the one you need to modify. but you already have adb composite interface... so that means drivers are installed.
what happens when you do adb devices after you get into cwm. what's the output?
Sent from my Nook Tablet CM7 BETA using xda premium app
this is where i am a complete noob. i have never used ADB and have been reading threads about people using it but the light bulb has just not gone off yet. i know how to get to the command prompt, heh, so that is one thing. what program do i need to install, is it the android SDK? thanks for your quick reply, i am generally a quick learner when it comes to this stuff just need to get over the ADB hurdle
neonblur said:
this is where i am a complete noob. i have never used ADB and have been reading threads about people using it but the light bulb has just not gone off yet. i know how to get to the command prompt, heh, so that is one thing. what program do i need to install, is it the android SDK? thanks for your quick reply, i am generally a quick learner when it comes to this stuff just need to get over the ADB hurdle
Click to expand...
Click to collapse
did you download the drivers and adb zip from one of the threads? that archive should have all you need for adb. after extractng you need to navigate to the extracted folder and do adb devices.
try looking in thr general section for these drivers I was talking about.
there should be a thread by lavero burgos in there.
Sent from my Nook Tablet CM7 BETA using xda premium app
ShinnAsuka said:
did you download the drivers and adb zip from one of the threads? that archive should have all you need for adb. after extractng you need to navigate to the extracted folder and do adb devices.
try looking in thr general section for these drivers I was talking about.
there should be a thread by lavero burgos in there.
Sent from my Nook Tablet CM7 BETA using xda premium app
Click to expand...
Click to collapse
Ha! got it going...ok so when i entered ADB devices it gives me:
2015170003944006 recovery
im feeling better about maybe getting this unbricked
neonblur said:
Ha! got it going...ok so when i entered ADB devices it gives me:
2015170003944006 recovery
im feeling better about maybe getting this unbricked
Click to expand...
Click to collapse
ok well now you have adb working. now the problem is how to fix your problem lol... I'll see if I can think of something.
in the meantime can you go into detail as to how you got tto your current situation?
EDIT: do you get any errors when booting into cwm? like not being able to mount a certain drive or something?
Sent from my Nook Tablet CM7 BETA using xda premium app
no errors booting into cwm internal and never had a problem when booting into it from an sd card. i flashed it internally hoping it would be a little easier seeing as how i only have one sd card but i am going to go get another today just to work through this.
nook started on 1.4.3 i rooted it using brianf23 and indirects sd card method. market and everything worked great. so i flashed Veronica's CM7beta_ribbon_ICS rom. everything for the most part was working, tho i did notice that some menu items would not open for me but they were noting i really needed to mess with at the time. so i installed a few apps and was done for the day. turned it on the next day and got stuck in a bootloop, so powered off and rebooted but got the same bootloop. booted into recovery did the standard dalvik cache ect and reflashed the rom, hoping this might fix the loop. upon rebooting is when i got stuck at the 'please reboot your device' screen. i have tried several methods of just flashing to stock ect, formatted my sd correctly and made sure it was active to try and flash back to stock that way but my nook will not boot from sd. so 12+ hours later i hung my head and asked for help lol! thanks to you i am able to start ADB no clue what to do but hey....step in the right direction!
Happy Dance
i got it working back to stock!! thank you so much for getting me going with ADB, without your help i would have stayed lost. i used kring789's ADB instructions and *poof* it rebooted to stock :good::good: thanks again for your help!
neonblur said:
i got it working back to stock!! thank you so much for getting me going with ADB, without your help i would have stayed lost. i used kring789's ADB instructions and *poof* it rebooted to stock :good::good: thanks again for your help!
Click to expand...
Click to collapse
good job on the fix. glad to help
Sent from my Nook Tablet CM7 BETA using xda premium app
Hi
I have always used cwm to put a rom on my wifes folio, mainly because I could not get fastboot to work.
With this new jelly bean rom, I cannot do it that way and need to fastboot, tried and failed again. Cannot see how to get the driver for the connection. Its driving me mad and really need some help, tried surfing here to find a solution and had no luck
David.
davjet said:
Hi
I have always used cwm to put a rom on my wifes folio, mainly because I could not get fastboot to work.
With this new jelly bean rom, I cannot do it that way and need to fastboot, tried and failed again. Cannot see how to get the driver for the connection. Its driving me mad and really need some help, tried surfing here to find a solution and had no luck
David.
Click to expand...
Click to collapse
I suppose you're running Windows?
Have you followed this guide to modify the drivers?
Yes, using windows but now its windows 8, is there any difference?
Sent from my Galaxy Nexus using xda app-developers app
fastboot works from xubuntu 12.10
Hi,
You might want to try xubuntu 12.10 as a plattform for fastboot. xubuntu runs on really old HW - mine is 8 years old. fastboot can be installed right from the SW Center. To flash the recovery image I had to use
fastboot -S 0 flash recovery name-of-recovery-image
Besides xubuntu is worth a try anyhow.
Best regards
Q&A for [ROM][STOCK][JB 4.2.2] ASUS MeMO Pad 8 (ME180A-WW-3.1.0.42)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][STOCK][JB 4.2.2] ASUS MeMO Pad 8 (ME180A-WW-3.1.0.42). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
My asus memo pad 8 not booting and not reach to check usb debuging...
When conecct usb fastboot mode device not found in win 8.1
Help me please
Sorry my bad english
hhzznn said:
My asus memo pad 8 not booting and not reach to check usb debuging...
When conecct usb fastboot mode device not found in win 8.1
Help me please
Sorry my bad english
Click to expand...
Click to collapse
Hello there,
If not using the "adbsetup" drivers or the ones off the ASUS website (sorry, couldn't find the ASUS drivers when I looked ), use one of the above. If using one and still not connecting, try the other option.
Also, check your USB ports to make sure you are not connecting via a USB 3.x standard. Android (or at least some Android devices) don't like those.
If all else fails, you may need a Linux build
Hope this provides a head start.
Sent from my LG-D520 using XDA Free mobile app
help me please
hello
my asus memo pad 8 not booting becuse im delete odex file in system/app after rooting..now device not booting any way!wipe data and wipe cash dont answer and not booting yet!!
in fast boot mode unlock oem not answering...
please help me ...
email :[email protected]
hhzznn said:
hello
my asus memo pad 8 not booting becuse im delete odex file in system/app after rooting..now device not booting any way!wipe data and wipe cash dont answer and not booting yet!!
in fast boot mode unlock oem not answering...
please help me ...
email :[email protected]
Click to expand...
Click to collapse
Looks you got a little further... :good:
From what I remember when I followed the guide, there was no feedback (nothing on the screen, and tablet remains black) on when you issue the unlock commands - which by the way, are:
Code:
fastboot oem unlock61646
fastboot oem unlockD696E
Then, reboot the bootloader and install CWM (first line may be substituted with rebooting into fastboot by hand):
Code:
fastboot reboot-bootloader
fastboot flash recovery recovery_cwm.img
fastboot flash misc misc_reboot-recovery.img
fastboot reboot
You shouldn't get a write-protect error this time around. Hope this helps.
By the way, your SKU is WW version, right? If not, my ROM may not help you (without going the long way around of instead of flashing the ROM, copying the odex files back into /system/app using CWM's ADB push command). Just a warning. If you are not WW, and insist on flashing anyway, I would highly recommend a nandroid backup (and probably copied) to MicroSD to protect your original (broken) ROM.
help me
my pad is sku = ww
in the fastboot mode i type fastboot oem unlock61646 and i get asnwer okey and finish but when type fastboot oem unlockD696E i get answer oem admunlock not request
help me please
hhzznn said:
my pad is sku = ww
in the fastboot mode i type fastboot oem unlock61646 and i get asnwer okey and finish but when type fastboot oem unlockD696E i get answer oem admunlock not request
help me please
Click to expand...
Click to collapse
The latter may have been for the 10" model - cannot remember. Try rebooting into fastboot now and see if CWM install takes.
Sent from my LG-D520 using XDA Free mobile app
joel.maxuel said:
The latter may have been for the 10" model - cannot remember. Try rebooting into fastboot now and see if CWM install takes.
Sent from my LG-D520 using XDA Free mobile app
Click to expand...
Click to collapse
the code:fastboot unlock oem61646 worked but fastboot oemD696E not working
in stock recovery i cant install rom.zip
and in fastboot when install recovery cwm answer bootloader lock
any offer for me?
---------- Post added at 09:14 AM ---------- Previous post was at 09:07 AM ----------
**you may need a Linux build **
i have a linux base ,, may you help me??
hhzznn said:
**you may need a Linux build **
i have a linux base ,, may you help me??
Click to expand...
Click to collapse
May not be as important now (if you got fastboot working in windows), but what distro do you have? I am familiar with Debian, Ubuntu, and their derivates.
Sent from my LG-D520 using XDA Free mobile app
joel.maxuel said:
May not be as important now (if you got fastboot working in windows), but what distro do you have? I am familiar with Debian, Ubuntu, and their derivates.
Sent from my LG-D520 using XDA Free mobile app
Click to expand...
Click to collapse
i have ubuntu....what should i do?
hhzznn said:
i have ubuntu....what should i do?
Click to expand...
Click to collapse
In a terminal...
apt-get install android-tools-fastboot
...would be a good start. You may need to register the device vendor in your configuration, which I can research later if...
fastboot devices
...lists nothing. Hope this helps.
Sent from my LG-D520 using XDA Free mobile app
Hi...I was having issues with my ME180A (WW variant) where the OTA update would never take (I had the tablet rooted) so when I finally found this thread and the associated stock ROM install instructions I thought I would give it a go to see if I could clean up the mess that I must have made rooting and de-bloating my tablet. I got adb and fastboot install on my win 8.1 machine with no problems, got CWM (from your link) installed on my tablet with no issues but when I tried to flash your original rom onto my tablet it would get partially through the install and then I would get
set_metadata_recursive; some changes failed
error in /data/media/0/K00L_Back_To_Stock_Untouched_Orig.zip
status 7
and the install would fail. I think this has somehow screwed up my bootloader because now my tablet constantly reboots into CWM no matter what I do. When the tablet is connected to my Windows machine, the drivers don't get loaded so ADB and fastboot just sit at "waiting for device" after I try some of the different commands. I'm familiar with flashing ROMs onto my phones and have never had an issue but I have had a lot of difficulties with this tablet. Do you have any advice to solve the bootloader and ROM flashing issues?
Thanks in advance for any assistance that can be provided.
Syncline said:
Hi...I was having issues with my ME180A (WW variant) where the OTA update would never take (I had the tablet rooted) so when I finally found this thread and the associated stock ROM install instructions I thought I would give it a go to see if I could clean up the mess that I must have made rooting and de-bloating my tablet. I got adb and fastboot install on my win 8.1 machine with no problems, got CWM (from your link) installed on my tablet with no issues but when I tried to flash your original rom onto my tablet it would get partially through the install and then I would get
set_metadata_recursive; some changes failed
error in /data/media/0/K00L_Back_To_Stock_Untouched_Orig.zip
status 7
and the install would fail. I think this has somehow screwed up my bootloader because now my tablet constantly reboots into CWM no matter what I do. When the tablet is connected to my Windows machine, the drivers don't get loaded so ADB and fastboot just sit at "waiting for device" after I try some of the different commands. I'm familiar with flashing ROMs onto my phones and have never had an issue but I have had a lot of difficulties with this tablet. Do you have any advice to solve the bootloader and ROM flashing issues?
Thanks in advance for any assistance that can be provided.
Click to expand...
Click to collapse
Hmmmm, I guess this is why I made two files, but the other may have similar problems because of this issue.
I will see if I can change the updater program. In the meantime, pop the other back-to-stock file onto MicroSD, reload CWM, and try that one. Report back to me in any case.
UPDATE:
If the above fails, try this one as well.
joel.maxuel said:
Hmmmm, I guess this is why I made two files, but the other may have similar problems because of this issue.
I will see if I can change the updater program. In the meantime, pop the other back-to-stock file onto MicroSD, reload CWM, and try that one. Report back to me in any case.
UPDATE:
If the above fails, try this one as well.
Click to expand...
Click to collapse
Joel,
I tried to flash the other back-to-stock file as you recommended however the end result was the same.
set_metadata_recursive: some changes failed
E:Error in /external_sd/K00L_Back_To_Stock_Re-Perm-Linked.zip
(Status 7)
Installation aborted.
Are there any other things that you can think of that I can try to get this issue fixed? And thanks for all your assistance, it is appreciated.
Syncline said:
Joel,
I tried to flash the other back-to-stock file as you recommended however the end result was the same.
set_metadata_recursive: some changes failed
E:Error in /external_sd/K00L_Back_To_Stock_Re-Perm-Linked.zip
(Status 7)
Installation aborted.
Are there any other things that you can think of that I can try to get this issue fixed? And thanks for all your assistance, it is appreciated.
Click to expand...
Click to collapse
So the third file I created (in my post update) replaces the updater-binary that would be causing issues with that particular CWM.
Third times the charm... :fingers-crossed:
joel.maxuel said:
So the third file I created (in my post update) replaces the updater-binary that would be causing issues with that particular CWM.
Third times the charm... :fingers-crossed:
Click to expand...
Click to collapse
Things worked great that time with the flash working and the tablet rebooting properly however now it is asking for a password to decrypt storage and this is the first time I've ever seen this. Any thoughts?
Syncline said:
Things worked great that time with the flash working and the tablet rebooting properly however now it is asking for a password to decrypt storage and this is the first time I've ever seen this. Any thoughts?
Click to expand...
Click to collapse
Were you encrypted before?
Could do is a nandroid of the data partition and then factory reset. You will have to set your apps up by hand again, but it is better than that message.
Sent from my MeMO Pad 8"
joel.maxuel said:
Were you encrypted before?
Could do is a nandroid of the data partition and then factory reset. You will have to set your apps up by hand again, but it is better than that message.
Sent from my MeMO Pad 8"
Click to expand...
Click to collapse
No I wasn't encrypted before but from what I read it seems to involve a failure to mount the DATA partition correctly, and the Android OS erroneously assumes it's encrypted. I'm not overly concerned about setting up apps by hand, I do have a titanium backup of my apps and data. As I'm still at work, I can't do too much playing around on my tablet. I don't have access to my personal computer that has all my tools like adb, fastboot, etc. until the work day is done. I've said it a couple of times, but I truly appreciate the assistance that you've provided.
UPDATE: After booting back into CWM, doing a factory reset and a format of the /data partition seems to have done the trick. I'm back into my tablet and currently updating all the pre-installed apps that require it. One more quick question Joel, you mention that the ROM is rooted and I do have SuperSU installed, however when I run the app it tells me there is no SU binary installed and SuperSU cannot install it, can I just install the latest version of a flashable SuperSU zip with CWM to fix this?
Syncline said:
UPDATE: After booting back into CWM, doing a factory reset and a format of the /data partition seems to have done the trick. I'm back into my tablet and currently updating all the pre-installed apps that require it. One more quick question Joel, you mention that the ROM is rooted and I do have SuperSU installed, however when I run the app it tells me there is no SU binary installed and SuperSU cannot install it, can I just install the latest version of a flashable SuperSU zip with CWM to fix this?
Click to expand...
Click to collapse
That's an interesting side effect...never had that happen before.
You can try it, and let me know. Hopefully your CWM is still kicking around, or else you will have to reinstall via fastboot. Or alternatively, just re-root normally (like with Kingo).
By the way, before you do that, does /system/xbin/su exist? Or what you could answer, is you could download Voodoo OTA RootKeeper and report back which values are not checked off. I think SuperSU update.zip places the su binary, nothing else. But we shall see.
Sorry Joel, I didn't see your reply before I flashed the SuperSU zip but it did work, my tablet is rooted again.