How can i update my xperia with FXP without loosing anything? I have FXP119 and im loving it! I want update to FXP120 but i dont want flash all again and loose my app data! How can i do that?
Just flash the .zip without doing a full wipe, I mean do not format data in recovery BUT format cache...If you experience any problems do a full wipe. I recommend a backup before updating!
i need flash boot.img again?
steps:
flash boot.img
wipe cache partition
install zip
thats correct?
Flash kernel go to cwm wipe cache and davlink cache install zip and you are done.
And you need to install gapps again..
I DID! its great! batery life is better!
but, my doubletwist player doesnt work anymore! why?
i installed again and nothing...
any ideia?
i updated to fxp122, but my doubletwist donsent work anymore...
before the update, i unistalled doubletwist, update FXP, and after this, i installed doubletwist, but nothing...
any ideia what can i do?
sorry my bad english...
Related
HI THERE EVERYONE!!! ive been a symbian user for years, but when i change to android got inlove with it. im currntly on WB voo8.1 2.2, have no problem with it flashing and rooting it. now im so exited for the GB update, i already download all files needed for WB tweak. after that of course i change to v8 to GB (tried it) installed thru xrecovery and followed steps in flashing 2.3
but when i rebooted after flashing my x10 stayed at the boot logo of sony ericssons. made me sad.......
can anyone pls help me with this tried posting at WB thread but since im a new user it said that i can post there. can sum1 pls help me here or any1 here from the same country.. im from the philippines. pls guys help me..
hve u flashed ftf file from flashtool...???
Ok here u are
Now go to xrecovery and do following steps
wipe user data full wipe
wipe cache partition
wipe cache
wipe dalvim cache
flash the rom
if now u get stuck on boot logo, just go to xrecovery wipe.cache and dalvik cache and the problem will gone.
Send from my own MIUI Final by Oskar.K X10 .
re. help pls..
yes i did that.
1. backup using xrecovery
2.did the following in xRecovery
-Factory Reset
-Wipe Cache Partition
-Format Cache
-Wipe Dalvik Cache
3.install WB gb zip
4.remove battery then put it back for a while
5.flashed ftf file using flashtool
6.reboot then stuckedddd.
do i need to download a newer flash tool? the one that i currently use is the that i use flashing baseband needed for WB v8.
ok ill give it a go again hehehe. im currently on 2.1.b do you guys think its an issue? and another one im using openvpn for my internet and subscribe locally at our local site here at my country. do you think that my tun.ko would work? badly need internet at my work and at home internet providers at our place sucks by the way because our place its not that develop when it comes to tlephone and internet.
knive13 said:
yes i did that.
1. backup using xrecovery
2.did the following in xRecovery
-Factory Reset
-Wipe Cache Partition
-Format Cache
-Wipe Dalvik Cache
3.install WB gb zip
4.remove battery then put it back for a while
5.flashed ftf file using flashtool
6.reboot then stuckedddd.
do i need to download a newer flash tool? the one that i currently use is the that i use flashing baseband needed for WB v8.
Click to expand...
Click to collapse
no dude u need latest BB .71 its in the WB ROM's thread.
yeAah i have it too followed the steps installed wiped needed things to be wiped then inatall custom WB zip,i didnt reboot then removed battery for a while then flashed ftf file on WB thread after flashing turn on phone then stucked at SE logo.
ill try to repeat the steps again hope fully i wont get the same result.. thanks to you guys. ill update u guys once i made it work. again lots of thanks to you guys its well aprreciated.. =)=)
Im currently using ver1.0 Pro but cannot seem to download any other versions after that.
I tried even Infinitum Project, i cant seem to get it pass the start screen.(meaning before the boot animation). Similar when flashing RR ver1.1 onwards
I think i cannot go anywhere after android 4.0.4. I am only able to flash back to v1.0 (Android 4.0.3).
what could be the problem? help?
can u explain the process you followed for the installation of the other roms after 1.0?
oh sorry.
For the RR Pro 1.3
full wipe
installed rom
reboot.
Infinatium project,
Full wipe
installed rom
installed gapps
installed themed gapps
reboot.
I would usually just follow the instructions that are given.
sorry too I were configuring my cellphone, just flashed to the 1.3 and works fine...
sometimes my sd card give me problems and I remove from the device, maybe it's not your case...
and additional to the wipe, I wipe the dalvik cache, and then install the rom.
In the roms in wich I got troubles with the start screen or rebooting its because the baseband (LPQ in my case) and I'm serching foward about these thing...
sorry about my english, but its not my native languaje
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
jonsim86 said:
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
Click to expand...
Click to collapse
Apart from asking the dev i suggest a full wipe and clean flash may cure the usual Kernel Panic .
jje
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
jonsim86 said:
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
Click to expand...
Click to collapse
wipe data,cache,dalvik cache and format system from mount and storage.
after installing also wipe cache and dalvik cache then reboot.hope this solves ur problem.
meaning to say i should delete everything in my storage and sd card? like format the memory?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
formatting system doesn't format ur sdcard data, it only
formats system folder.
sorry im quite a noob so... how do i format the system?
jonsim86 said:
sorry im quite a noob so... how do i format the system?
Click to expand...
Click to collapse
go to recovery mode then mount and storage and select format system.
giving it a try. Thanks
i just cant seem to install anything after v1.
from v1. siyah kernel v3.
did a data wipe
cache wipe
format system
divak wipe
install rom
install gapps fix
reboot
it just get stuck at start up before the bootanimation. why?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
yeap it just clears the system data, then you can do a clean flash from there. that should do it
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
jonsim86 said:
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
Click to expand...
Click to collapse
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Azure Flame Kite said:
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Click to expand...
Click to collapse
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
MyLifeRocks10 said:
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
Click to expand...
Click to collapse
If you just relax for a minute , take a deep breath and start from the beginning. Listen to what people are telling you. Follow step by step from the beginning. Read what the developer says on flashing the rom and then it will work. Almost impossible not to get the rom working after that. It will all come together mate. Read a lot of posts. Good luck.
Sent from my GT-I9100 using xda premium
Hi guys, you can tell me how to install this rom? http://forum.xda-developers.com/showthread.php?t=2012666
What kernel should I use for better results?
I think like any other rom...
Put it into your sd-card, reboot to CWM and do the wipes(Factory reset, wipe cache, wipe dalvik cache, format system) and the install the .zip
But first of all you should flash the kernel which is given in the download(together with the rom)
AW: [Q] How to install this rom? xD
I think he better should not format system
Just wipe data/factory reset, wipe cache and advanced -> wipe dalvik cache!
Sent from my Nexus 7 running Android 4.2.1
I'm doing it everytime I flash a new rom
Nothing wrent wrong :fingers-crossed:
Any ICS kernel is compatible. I strongly recommend MESA Hybrid v3.5 or LuPuS v3. I also recommend to format system before flashing new ROM. I've done it over 100 times safely. You'll avoid a lot of problems.
malte180684 said:
I'm doing it everytime I flash a new rom
Nothing wrent wrong :fingers-crossed:
Click to expand...
Click to collapse
I think he should first do it without wiping system and incase it was required and he stuck in a bootloop, then he can simply do the process again with wiping system
Press THANKS if I helped,
Regards,
AJ
I tried the rom(with rage kernel 3.2), and always go in bootloop
make sure u already have ur ROM on sdcard and the others (wifi-fix.zip or whatever)
on CMW, u can safely wipe /system when u wanna flash new ROM, but REMEMBER not to reboot your phone AFTER u wipe /system. if u do this, u will see "new boot kernel animation" a.k.a BOOTLOOP.
after wipe /system,/cache,/dalvik,/data,/sd-ext then next thing is install ur ROM.
if u using TWRP, its not necessary to wipe /system bcoz TWRP will wiping /system by itself when u install new ROM.
yes, i sent from my phone using Xda Premium, so what?
Click to expand...
Click to collapse
Hey everyone,
So after struggling around a day or so, i finally unlocked the BL, rooted and flashed recovery by artas (thank u ^_^ for this awesome tool).
So i would like to know what are the do's and don'ts when flashing custom roms.
My usual procedure is.
1.Wipe data and cache
2.Flash new rom
3. Wipe data and cache.
4. Reboot phone and wait.
If there are additional steps or uneccessary steps. Do point out
Thanks
U should flash cwmtouch.IMG and not use artas cwm after u unlock bootloader..artas cwm doesn't seem to work with some ROMs I've found..
I do it this way
Wipe dalvik cache.. Cache
Format system
Wipe data factory reset
Flash ROM zip.. Flash Google apps..
Reboot
Sent from my LG-P769 using xda app-developers app
matthewstice said:
U should flash cwmtouch.IMG and not use artas cwm after u unlock bootloader..artas cwm doesn't seem to work with some ROMs I've found..
I do it this way
Wipe dalvik cache.. Cache
Format system
Wipe data factory reset
Flash ROM zip.. Flash Google apps..
Reboot
Sent from my LG-P769 using xda app-developers app
Click to expand...
Click to collapse
Could you link me to the cwm u mention?
Also I've been stuck on PA 4.3 and cannot access my sd card via usb, drivers always fail installation
Ill revert back to stock probably and then re-start everything...
if you flash kdz to stock make sure to use a rom that acknowledges the bootloader is unlocked or the adb reboot oem-unlock wont work.
i had that problem and just went back to v20b on my p769 then flashed recovery and rom and everything worked fine
Hi, newbie here. I have trouble with wifi. My phone is Xperia P
I installed aospa rom, at the beginning everything was fine but few hours later I couldnt turn wifi on. I didint know what to do, so I just factory reset the phone. Same thing happened.
Then I installed Blur Line (CM 11) rom, same thing happened again.
On advanced setting it says Mac adress unavailable (idk if this is related with problem)
I searched google and xda for possible solutions.
solution 1 is installing sqlite editor and changing "wifi_display_on" value to 0
this didnt work because it was already 0
solution 2: settings/wi-fi/advanced/wi-fi region code
this didnt work too. I select Turkey (I live in Turkey) but whenever I exit settings and turn back none of the region is selected.
solution 3: copy WCNSS_qcom_wlan_factory_nv.bin file to somewhere
it is on motorola atrix hd thread, so idk if this can work for my phone too. I downloaded it but havent tried yet
Do you think it can work for my phone, or is there any "wifi fix file" for Xperia P
What sould I do now? Should I install another rom (slimkat, pacman, miui v5) or is there any solution for fixing wifi?
Thanks for replies.
Describe the steps you followed to install the ROM.
hliasant said:
Describe the steps you followed to install the ROM.
Click to expand...
Click to collapse
My phone was on stock rom, rooted and cwm installed.
First I unlock bootloader via flashtool, then I flash the boot.img via flashtool
I flash the rom and gapps with cwm (wipe cache, dalvik, factory reset) but then I flash the rom with twrp (wipe data, cache etc) again.
i dont know if I wipe some important data
formerly I installed some stock base roms via cwm, and I didnt wipe anything extra this time
I backuped TA partition before unlock bootloader. Is wifi work if I relock bootloader and flash stock rom & kernel
Fenomenon said:
My phone was on stock rom, rooted and cwm installed.
First I unlock bootloader via flashtool, then I flash the boot.img via flashtool
I flash the rom and gapps with cwm (wipe cache, dalvik, factory reset) but then I flash the rom with twrp (wipe data, cache etc) again.
i dont know if I wipe some important data
formerly I installed some stock base roms via cwm, and I didnt wipe anything extra this time
I backuped TA partition before unlock bootloader. Is wifi work if I relock bootloader and flash stock rom & kernel
Click to expand...
Click to collapse
Seems like some kernel modules are missing.
This is a sure method-procedure that I follow for flashing a new ROM on my and on my friends' XP.
1)flash stock JB firmware(ftf) using flashtool.
2)flash boot.img from the ROM you want to flash, using flashtool.
3)reboot in twrp using power button during boot up.
4)wipe data, cache, dalvik.
5)flash ROM + gapps and reboot.
hliasant said:
Seems like some kernel modules are missing.
This is a sure method-procedure that I follow for flashing a new ROM on my and on my friends' XP.
1)flash stock JB firmware(ftf) using flashtool.
2)flash boot.img from the ROM you want to flash, using flashtool.
3)reboot in twrp using power button during boot up.
4)wipe data, cache, dalvik.
5)flash ROM + gapps and reboot.
Click to expand...
Click to collapse
thanks for help :good:
I install slimkat 8.8 and wifi works fine atm :laugh: