I am using CM9 on my SGS2. I have been flashing the nightlies for months. But I wanted to give CM7.2 a shot so I tried flashing that. But it gave me a boot loop. So I reloaded CM9 using Odin, re-downloaded CM7.2, checked the md5 and tried flashing again... same result. So I tried a couple of other GB ROMs and I got the same result. So I thought maybe the problem is CWM and I tried flashing a stock Samsung GB firmware but I got a boot loop again... but I have successfully flashed an ICS firmware, CM9 and MIUI4 since then. I can only use ICS ROMs.
So the problem must be my phone. Can anybody suggest what the problem might be or suggest a way to fix this? My phone works perfectly otherwise.
are you trying these with full wipe before and after the installation
+1 @ zacq
simple answer format system partition and will not bootloop for sure
deleted
ZACQ8 said:
are you trying these with full wipe before and after the installation
Click to expand...
Click to collapse
Yes. When I wipe afterwards I get kernel panic upload mode.
Related
so, I've had my SG2 for like a month now, rooted and all, but the problem is , i can't flash any other ROMs(but stock ROMs) or kernels (except for CF root,stock and siyah kernels ) on it via CMW... each time i tried to flash anything, i end up stuck at "galaxy s2 GT-I9100" boot-up logo.... I've tried flashing CM7 then i got the boot-loop ( even with double flash, or triple didn't work for me) and i can't get into CWM when i got the boot-loop....
someone please help me.. i read alotta threads and none of them got similar issue like mine...
i guess its true what they say : every galaxy s2 is different from the rest.
Hmm....must be something you're doing wrong. Nothing to do with Galaxy S2 being different.
Have you always followed the dev's instructions while flashing roms?
Wiping data, cache? Matching up the kernels and roms?
As far as I know, there hasn't been a single person who completely failed to install VillainROM on their SGS2.
I would advise you to give it a go.
Transmitted from a Galaxy far far away via XDA lightspeed telepathy.
What ROMs have you tried to flash?
If you're tring to flash AOSP ROms like CM7 or MIUI it's normal if you're not doing it with a comatible version of CWM. For example, cf root kernel installs a modified version of CWM on your device, which is not compatible with CM7. IF you want to flash CM7 first you have to flash codeworkx kernel http://forum.xda-developers.com/showthread.php?t=1118693, and then enter recovery (the new CWM installed with this kernel) to flash CM7.
Now if you can't flash samsung firmware based ROMs (villainROM, Leomar Revolution, Batista...), I don't know what it could be. I never had a problem flashing samsung firmware custom ROMs with the cf root CWM recovery.
tomascunill said:
What ROMs have you tried to flash?
If you're tring to flash AOSP ROms like CM7 or MIUI it's normal if you're not doing it with a comatible version of CWM. For example, cf root kernel installs a modified version of CWM on your device, which is not compatible with CM7. IF you want to flash CM7 first you have to flash codeworkx kernel http://forum.xda-developers.com/showthread.php?t=1118693, and then enter recovery (the new CWM installed with this kernel) to flash CM7.
Now if you can't flash samsung firmware based ROMs (villainROM, Leomar Revolution, Batista...), I don't know what it could be. I never had a problem flashing samsung firmware custom ROMs with the cf root CWM recovery.
Click to expand...
Click to collapse
If your phone has cf-root/kernal and cf cwm can you just flash over top codeworkx's kernel and do you have to re-root?
InFa_ReD_1 said:
If your phone has cf-root/kernal and cf cwm can you just flash over top codeworkx's kernel and do you have to re-root?
Click to expand...
Click to collapse
If you already have root then you won't loose it.
geko95gek said:
Hmm....must be something you're doing wrong. Nothing to do with Galaxy S2 being different.
Have you always followed the dev's instructions while flashing roms?
Wiping data, cache? Matching up the kernels and roms?
As far as I know, there hasn't been a single person who completely failed to install VillainROM on their SGS2.
I would advise you to give it a go.
Transmitted from a Galaxy far far away via XDA lightspeed telepathy.
Click to expand...
Click to collapse
I used to use VR 3.0 but could only work with stock kernel or cf root kernel has never booted with the ROM's kernel..
tomascunill said:
What ROMs have you tried to flash?
If you're tring to flash AOSP ROms like CM7 or MIUI it's normal if you're not doing it with a comatible version of CWM. For example, cf root kernel installs a modified version of CWM on your device, which is not compatible with CM7. IF you want to flash CM7 first you have to flash codeworkx kernel http://forum.xda-developers.com/showthread.php?t=1118693, and then enter recovery (the new CWM installed with this kernel) to flash CM7.
Now if you can't flash samsung firmware based ROMs (villainROM, Leomar Revolution, Batista...), I don't know what it could be. I never had a problem flashing samsung firmware custom ROMs with the cf root CWM recovery.
Click to expand...
Click to collapse
My phone came with CM7, but i flashed it with rooted stock coz i wanted to have a feel of it... but now i'm done with it but i can't get any roms to work... so frustrating.
i literally have tried flashing ALL Roms (ligtnung, gingerbread,vr, cm7), during the 1st few days that i got my phone it worked with VR 2.5 and 3.0, even MIUI.. but after i flashed with some Asian stock ROM via odin... nothing would work through cmw anymore...
i seriously don't know what i did wrong...
btw, right now im using basebad ver: I9100XXXKI4, kernel: 2.6.35.7-siyah [email protected]#20, build number GINGERBREAD.ZSKI3.
I really don't know. YOu should try to go the closest possible to stock and try from there. DO a full wipe, wipe data, wipe system, everything and flash a stock ROM from your country and carrier (there is a thread from infratech where you can get carrier specific ROMS). THen connect your phone to kies (maybe yo get an oficial update) and then do everything from scratch, root, install CWM, etc...
That's what I'd do but I really don't now if it's the best option.
i have almost the same problem,but me i can flash any rom,but the problem is with the kernel my phone refuse to boot on any other kernel else than cf-root and the speedmod,it freezes in the kernel loading so i must turn it off and reflash via odin cf-root or speedmod to get it works again.
tomascunill said:
I really don't know. YOu should try to go the closest possible to stock and try from there. DO a full wipe, wipe data, wipe system, everything and flash a stock ROM from your country and carrier (there is a thread from infratech where you can get carrier specific ROMS). THen connect your phone to kies (maybe yo get an oficial update) and then do everything from scratch, root, install CWM, etc...
That's what I'd do but I really don't now if it's the best option.
Click to expand...
Click to collapse
well, i'm gonna try that and see if it works, am also goin' try to see if downgrading to 2.3.4 or something would work too...
but please if you got any more ideas, just keep it coming..
thanks
Phew! NOW I HAVE CM7 RUNNING ON MY PHONE!!
I'm gonna try to explain how i fixed my issue, as clear and explanatory as i can..
lucky i didn't brick my phone during all this, because I tried so many things and none worked.I unsuccessfully tried downgrading to XWkI4, ZCKI4, and alot others via Odin... after flashing all i get is tons of error messages(on 3e recorvery) E: can't open/cache or E:failed blah bla bla to load /efs... i thought OMG! my phone is bricked! then i recalled reading somewhere that flashing the 3 tar (PDA,MODEM,CSC) files usually should work(maybe better than flashing a 1 tar file), so i found a 3 files xxKI3 rom, flashed it and BAM! it booted up this time without any error. so now i went ahead and rooted it since the tar files came unrooted, then went into CWM to flash cm7 ROM, flashed it twice and ofc i got stuck on boot logo.....i didn't panic much, i pulled out the battery, and restarted to CWM where i cleared cache/ dalvik/ and did wipe/factory reset, then i reflashed CM7 again (twice) and it worked!!!! YES, CM7 is fiannly working on my SG2!
thanks for everyone for helping, and i hope this can help others on the same boat as me..
Hello,
Today I thought, let's try out ICS! Found this guide (can't post outer links, search for "android advices ICS Android 4.0.1 XXKP2 " in google), and used it to update my phone to ICS.
Well, after trying out the rom, I would like to go back to my MIUI backup, rooted it, installed clockworkmod recovery and booted up the recovery mode. The recovery said "can't mount /cache/*" for all cache folders. So I couldn't restore my backup.
After reading some stuff I installed a recovery through Odin. Worked like a charm, no alerts of mounting failures. Restored my backup, but when it was rebooting it gave an "Kernel Panic - Upload mode" screen. Couldn't do anything, so put the battery out and back in.
After this I installed ICS again with the same steps as in the guide. This worked! Rooted and installed recovery again, no problems so far. Tried a fresh install of MIUI but with the same problems.
So I can flash ICS but I can't flash any other rom, what can be the problem?
Every help and tips are welcome!
Thanks in advance!
Same thing happened to me last nite, kernel panic, and im panic too. This happened after flashing that cm9 coz i just wanna try and see how cm9 look like and i know im not going to stick with it, just for trying. Now im back to miui.
What i did is i flashed back to stock rom, root, then flash miui, or any rom that you want. Very simple.
Rom : MIUI ICS XGT 'EXTENDED'
Kernel : Xcell-69X
Modem : XXKP8
Sent from Galaxy SII
I have the same problem I guess, tried ICS, went back to stock which I was using. Got Kernel panic upload mode several times, solution for this was flashing an older 2.3.6 version.
After this no more kernel panics...
But I can't flash any custom roms anymore.
My phone's working luckily but it doesn't work like it's supposed to
Gepstra said:
I have the same problem I guess, tried ICS, went back to stock which I was using. Got Kernel panic upload mode several times, solution for this was flashing an older 2.3.6 version.
After this no more kernel panics...
But I can't flash any custom roms anymore.
My phone's working luckily but it doesn't work like it's supposed to
Click to expand...
Click to collapse
Thats not true my friend, you flash any custom rom. Nothing need to worry about.
Rom : samsung stock firmware
Kernel : stock kernel
Modem : stock modem
Sent from Galaxy SII
Gepstra said:
I have the same problem I guess, tried ICS, went back to stock which I was using. Got Kernel panic upload mode several times, solution for this was flashing an older 2.3.6 version.
After this no more kernel panics...
But I can't flash any custom roms anymore.
My phone's working luckily but it doesn't work like it's supposed to
Click to expand...
Click to collapse
Did you make sure to flash back the old GB bootloaders? Restoring a backup wont flash them back.
Coming from passion rc 13.1 for over a month.
Thinking of flashing a new rom.
after cache wipe it reads "E:unknown volume for path [Sd-ext]
this is totally unexpected. its my first flash error.
the flash the Miuiv4 4/27 built
it reads "status 7 installation aborted. and i reflashed it four times and still the same issue.
then I tried ICS zen 1.7 and i reflashed it four times and still the same issue.
finally I decide to flash back to Passion RC13.1 and the installation completed.
im so confused why I cant flash a new rom.
Anyone knows a solution for this?
Old recovery. Flash a kernel like glitch first then get into recovery and flash whatever you want.
Sent from samsung Vibrant
Alex9090 said:
Old recovery. Flash a kernel like glitch first then get into recovery and flash whatever you want.
Click to expand...
Click to collapse
do you mean my recovery is an old version?
my recovery is version 5.5.0.2
how does a flashing of new kernel help solve the issue?
Yes. All of our kernels come bundled with recovery. Flash a newer version.
Sent from samsung Vibrant
Hi Everyone! just a rookie here in need of a bit of advice.
I'm a Galaxy S II I9100 owner and have my phone rooted and all setup with custom roms and been comfortable with flashing for some time now. My ROM of choice recently was Vanilla Rootbox and have to say the ROM has been fantastic with very few bugs to report. Last night i recieved the OTA update via Goo Manager for Vanilla Rootbox 3.4. I downloaded the full update over wifi and flashed with all wipes no worries. Next step was to flash the latest GAPPS and i figured there would be nothing wrong with flashing the GAPPS zip i had on my sd card that i had downloaded the last time i was notified of a GAPPS update via Goo manager as well. After flashing, wiping everything and rebooting again. My phone then booted up to a series of dialog boxes indicating that many google processes had stopped functioning. apps.google.com etc etc. A similar error has been reported in the Vanilla Rootbox thread by another user but i wasnt able to report this bug their either because my post count is too low to post in a development forum. So after seeing this error i rebooted into recovery to flash my last backup but CWM recovery came back with an error messaging stating it couldnt mount either ext or int sdcard. i did a factory reset which made no difference to the problem whatsoever. I then downloaded ODIN and the latest stock ICS Rom and flashed it via ODIN with no reported errors. My phone now boots through the optus boot animation and is stuck at the Galaxy S 2 screen with the flashing red and yellow animation over the S. If i turn off the phone with the power button, the phone turns off and immediately starts again and gets stuck at the flashing s screen. I've taken the battery sim and ext sd card out and put it all back in only for the problem to persist.
If anyone could help me there's a donation and my thanks in it!
Much appreciated
Nick
tried to re flash another stock ROM?
If so, tried factory reset the phone after the flash?
As long as you can get to DL mode, you are good to keep on flashing till you are up & running.
And then you got this
Remember to update your kies and make sure you close it all up before flashing with odin. If you are in 4.0.4 beware of the brick bug.
gastonw said:
tried to re flash another stock ROM?
If so, tried factory reset the phone after the flash?
As long as you can get to DL mode, you are good to keep on flashing till you are up & running.
And then you got this
Remember to update your kies and make sure you close it all up before flashing with odin. If you are in 4.0.4 beware of the brick bug.
Click to expand...
Click to collapse
Kies has never been installed on this computer but i did use the usb drivers mentioned in the soft brick recovery guide you linked. I used some information from the guide to flash this stock rom but i couldnt flash or wipe the partition because im unsure where to get the .PIT file required? i cant get past the boot animation so no factory reset possible and yes i can still get into download mode!
darkstar117 said:
Kies has never been installed on this computer but i did use the usb drivers mentioned in the soft brick recovery guide you linked. I used some information from the guide to flash this stock rom but i couldnt flash or wipe the partition because im unsure where to get the .PIT file required? i cant get past the boot animation so no factory reset possible and yes i can still get into download mode!
Click to expand...
Click to collapse
wow wow, leave pit files alone for now, they are nasty.
What stock ROM did you flash? 4.0.4 or 4.0.3?
You can factory reset via recovery mode.
Try installing kies anyway, it can't never hurt. Just make sure all applications are closed before you re-flash.
here's jb leak, might help:
http://www.sammobile.com/2012/11/15/i9100xxlsj-%E2%80%93-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/
Right so i flashed I9100XWLP8 stock rom (4.0.3). Just then i flashed Siyah Kernel and attempted to use the factory reset function in recovery there, i get a message down the bottom mentioning that it can't mount my internal SD.
darkstar117 said:
Right so i flashed I9100XWLP8 stock rom (4.0.3). Just then i flashed Siyah Kernel and attempted to use the factory reset function in recovery there, i get a message down the bottom mentioning that it can't mount my internal SD.
Click to expand...
Click to collapse
Tell me your:
Model
Firmware
Country
Carrier
Always mention this
try flashing jb leak (ROM, modem & kernel package).
Hey folks,
I'm desperately trying to get a CustomRom working on my GP4.
I'm relatively new to the device, but not to CustomRom's, since I was using a Motorola Defy untill last summer, running CM7.2 and CM9, MIUI and a couple of others.
So here's my issue:
I flashed the Terrasilent Kernel in order to get CWM so I could flash the .zip's from there, as some weren't available for odin.
The kernel works fine, but as soon as I try to flash any CustomRom (I tried CM9, CM10.2, Hydrogen and the PACMAN Rom), I'm just getting infinite bootloops.
I also tried flashing with SD card removed, SD card back in....doesn't help. No matter whether it's done with odin or CWM.
Mostly I get stuck at the Samsung screen , the PACMAN insert coin or the Terrasilent phonebooth .
Does anyone have suggestions how I could make it work?
Cheers!
basti_b24 said:
Hey folks,
I'm desperately trying to get a CustomRom working on my GP4.
I'm relatively new to the device, but not to CustomRom's, since I was using a Motorola Defy untill last summer, running CM7.2 and CM9, MIUI and a couple of others.
So here's my issue:
I flashed the Terrasilent Kernel in order to get CWM so I could flash the .zip's from there, as some weren't available for odin.
The kernel works fine, but as soon as I try to flash any CustomRom (I tried CM9, CM10.2, Hydrogen and the PACMAN Rom), I'm just getting infinite bootloops.
I also tried flashing with SD card removed, SD card back in....doesn't help. No matter whether it's done with odin or CWM.
Mostly I get stuck at the Samsung screen , the PACMAN insert coin or the Terrasilent phonebooth .
Does anyone have suggestions how I could make it work?
Cheers!
Click to expand...
Click to collapse
Did you wipe the data/cache? Also, I believe you're supposed to flash then ROM first, THEN you flash the kernel.
TheKryptonite said:
Did you wipe the data/cache? Also, I believe you're supposed to flash then ROM first, THEN you flash the kernel.
Click to expand...
Click to collapse
Forgot to mention that: I tried various ways: first wipe data/cache, then flash ROM; first flash ROM, then wipe cache; wipe cache, flash ROM, wipe again...
In order to get CWM recovery and being able to flash a zip I flashed the Kernel first. For CM9 I followed this http://forum.xda-developers.com/showthread.php?t=2213152
As I couldn't flash any of the pre-flash zip from stock, I thought it's necessary to flash a kernel including CWM first. It was done in the same way in some youtube tutorial I watched, where the guy already had the terrasilent kernel on his device.
For odin, I will check if it works with first flashin the ROM and afterwards the kernel.
Cheers for your fast reply!