I followed these steps
(1) Install .71 Baseband (link) with newest Flashtool (link) - you may use another baseband at your own risk but there is no support, we only test (because we only have) on Baseband 2.1.71 X10i
(2) After Flashtool says "Disconnected" then "Reconnected in Flash Mode", REMOVE CORD and BATTERY and wait ten seconds!
Click to expand...
Click to collapse
of this guide
after that, when i turn it on it shows the white SE logo and turns off, then turns on and then all over again...
any ideas?)
i used Baseband 2.1.71 and Flastool 0.7.1.0
xperia x10i android 2.1
SE logo? You're on the wrong kernel I think. Take a look at step 3 and Flash the M&M team kCernel
when i connect it to pc it starts showing logo and rebooting
ashley_ said:
when i connect it to pc it starts showing logo and rebooting
Click to expand...
Click to collapse
I think that you have rpoblems with getting into flash mode, tri it with different was, prepare everything as decribed before and do notconnect the phone to computer and wait for dialog which is waiting to connect phone with animation and steps how to it.
Do NOT connect phone to PC. Take out battery, put it back. COnnect usb cable to the phone, not second part of cable to PC. Press the Back button and hold it. Then push power on (back button still on hold), green diode will blink for a while. Then you can connect phone to PC and it will enable flash phone flawlessly.
hjoray, it conects in flashmode!)
but something went wrong...when everything is finished, phone should reboot but it simply stays off
heres the log:
Code:
15/035/2012 21:35:26 - INFO - <- This level is successfully initialized
15/035/2012 21:35:26 - INFO - Flashtool Version 0.7.1.0 built on 2012-05-01 22:07:23
15/035/2012 21:35:26 - INFO - You can drag and drop ftf files here to start flashing them
15/035/2012 21:35:31 - INFO - Device disconnected
15/036/2012 21:36:34 - INFO - Selected X10i_2.1.71_ARO.ftf
15/036/2012 21:36:34 - INFO - Preparing files for flashing
15/036/2012 21:36:46 - INFO - Please connect your device into flashmode.
15/038/2012 21:38:12 - INFO - Device connected with USB debugging off
15/038/2012 21:38:12 - INFO - For 2011 devices line, be sure you are not in MTP mode
15/038/2012 21:38:30 - INFO - Device disconnected
15/039/2012 21:39:30 - INFO - Device connected in flash mode
15/039/2012 21:39:30 - INFO - Opening device for R/W
15/039/2012 21:39:30 - INFO - Reading device information
15/039/2012 21:39:30 - INFO - Phone ready for flashmode operations.
15/039/2012 21:39:30 - INFO - Start Flashing
15/039/2012 21:39:30 - INFO - Flashing loader
15/039/2012 21:39:32 - INFO - Loader : S1_Loader_Root_f851 - Version : R4A024 / Bootloader status : UNROOTABLE / IMEI : 01237900113664
15/039/2012 21:39:33 - INFO - Flashing kernel.sin
15/039/2012 21:39:35 - INFO - Flashing fota1.sin
15/039/2012 21:39:36 - INFO - Flashing fota0.sin
15/039/2012 21:39:37 - INFO - Flashing amss_fs.sin
15/039/2012 21:39:37 - INFO - Flashing dsp1.sin
15/039/2012 21:39:45 - INFO - Flashing amss.sin
15/039/2012 21:39:56 - INFO - Flashing cache.sin
15/039/2012 21:39:57 - INFO - Ending flash session
15/039/2012 21:39:57 - INFO - Flashing finished.
15/039/2012 21:39:57 - INFO - Please wait. Phone will reboot
15/039/2012 21:39:57 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
15/039/2012 21:39:57 - INFO - Device connected in flash mode
15/042/2012 21:42:53 - INFO - Flash canceled[HTML][HTML][/HTML][/HTML]
SOmetimes it happens,no worry
Disconnect phone from computer and turn it on normally. If geen diode will blink, then pull out battery and put back and try to turn it on once again. It will solve it surely
when i turn it on it only shows white se logo then turns off and red led blinks 3 times
and every time it makes some crackly sound before turning off
ashley_ said:
when i turn it on it only shows white se logo then turns off and red led blinks 3 times
and every time it makes some crackly sound before turning off
Click to expand...
Click to collapse
Hmm, this doesnt looks good - i think that you will need to reflash the complete ROM now.
ashley_ said:
when i turn it on it only shows white se logo then turns off and red led blinks 3 times
and every time it makes some crackly sound before turning off
Click to expand...
Click to collapse
How do you get SE logo with unlocked bootloader? I didn't get that. Maybe your bootloader is locked?
HeliumX10,
which rom shall i use?
LzVebz,
maybe
how can i check it?
LzVebz said:
How do you get SE logo with unlocked bootloader? I didn't get that. Maybe your bootloader is locked?
Click to expand...
Click to collapse
He didnt told that he has an unlocked bootloader, soI expet that his bootloader is locked.
ashley_ said:
HeliumX10,
which rom shall i use?
Click to expand...
Click to collapse
Try this one, its the generic 2.3.3 bundle:
http://www.multiupload.com/JEXUAHAZTL
After this you can install whatever rom from xrecovery.
the link is broken(
and all the other links i found are the same...
any other suggestions?)
ashley_ said:
the link is broken(
and all the other links i found are the same...
any other suggestions?)
Click to expand...
Click to collapse
Found a valid link for you:
http://www.2shared.com/file/h1kNxDVv/X10i_301G075_GLOBAL-GGL_GENERI.html
thanks for the link)
tried this rom but it all repeted...does not reboot when flashing finished, logo -> off -> blinking red led
ashley_ said:
thanks for the link)
tried this rom but it all repeted...does not reboot when flashing finished, logo -> off -> blinking red led
Click to expand...
Click to collapse
Hmm,really strange. I am afraid that there is a hardware issue which needs repair.
Try the last thing - take battery out and leave phone without battery for about one hour. Then try to power it on.
I will also look into service manual what does triple red led blink means.
EDIT:
Found a note in folder with my service manuals - this is the "soft brick"
If the flashing stock ftf before finished without problems, then put your phone on the chrager and leave it charging wor a few hours. It will start up itselfs.
charged it but it didnt start up
now phone behaves as in the 1st post, the only thing changed - now after se logo it shows animated splash screen for less a second
and this weird sound it makes every time...it scares me
ashley_ said:
charged it but it didnt start up
now phone behaves as in the 1st post, the only thing changed - now after se logo it shows animated splash screen for less a second
and this weird sound it makes every time...it scares me
Click to expand...
Click to collapse
Hmm some news at least...
Could you repeat the process one again (flash and charge) and post here the complete log of the whole flashing?
Because if we will not find anything unusual i will be out of ideas...
i understood what was wrong) after i read another manual i found out i should update my fw via SEUS before flashing...
successfully installed android 2.1, updated it via SEUS and installed 2.3.7. Now everything is ok)
thanks everyone for the feedback)
stuck at SE logo
dude can i have that manual link that u read....
hi! have someone solve this problem? my x10 wont turn, after flash with some firmware i got SElogo then with other firmware green light -> vibrate and then nothing! im really lost, dont know which rom or kernel i have now and i cant install a new one, flashtool always fail now
Related
Well, the question is that, this afternoon i was recovering mi x10i when suddenly all the city have a blackout and I lost all the repair progress, well, my surprise is when i try to re-repair the phone, the SEUS doesn't update the phone, giving me a error like this when i try to restore:
only copy the url of the images to view it on a new tab:
The error of the updating
img59.imageshack.us/img59/102/capturaqx.jpg
and this image appear when i click cancel.
img59.imageshack.us/img59/102/capturaqx.jpg
I don't know how to do it, but the computer detect the SEMC Flash device and now i'm lost, becouse when i plugged the phone to the charger, the x10 automatically enter on flash mode, now i'm stucked
I give you a picture of the driver that is recognized.
imageshack.us/photo/my-images/405/captura2b.jpg/
Thanks for your help
EDIT: I recive a flasing error when I try to flash with the Flashtool and this rom "X10i_3.0.1.G.0.75_1241-1846.ftf" i get this messsages.
30/054/2011 20:54:41 - INFO - <- This level is successfully initialized
30/055/2011 20:55:31 - INFO - Preparing files for flashing
30/055/2011 20:55:34 - INFO - Searching Xperia....
30/055/2011 20:55:41 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&766E368&0&1
30/055/2011 20:55:41 - INFO - Start Flashing
30/055/2011 20:55:41 - INFO - VER="R8A031";DATE="20100707";TIME="11:32:00";
30/055/2011 20:55:41 - INFO - Flashing loader
30/055/2011 20:55:42 - ERROR - Error flashing. Aborted
30/055/2011 20:55:42 - INFO - Now unplug the device and power it on
30/055/2011 20:55:42 - INFO - Then go to application settings
30/055/2011 20:55:42 - INFO - turn on Unknown Sources and Debugging
Click to expand...
Click to collapse
Well, the most silly thing is that I can't turn on Unknown Sources, because the device only vibrates and never boots up, and if I plug the x10 via usb on the charger or the PC, automatically he bot's up on flash mode, or so it seems, because the green led boots ups. I think that I've the first person that bricked the x10i
i think u hav the same problem. maybe this will help
http://forum.xda-developers.com/showthread.php?t=1190540
blmn1337 said:
i think u hav the same problem. maybe this will help
http://forum.xda-developers.com/showthread.php?t=1190540
Click to expand...
Click to collapse
I still stucked
new info added on the post.
I think you'll have to get it repaired by Sony
So you did the inevitable... you got a phone that's bricked.. fear not.. this happens to all of us.. consider it a "right of passage" when it comes to dealing with custom ROM's
Here at xda, help is never too far away (I was there once too)
I've tried to get you back to functioning latest Local 2.1 with recovery (xrecovery)
0) You'll lose all data with this method....
come to terms with that... not stuff on the sd card but data of your phone, sms'es, contacts, applications etc
1) Turn off your phone
Pull the battery and reinsert it if you have to...
2) Install Flashtool
go here and downlad flashtool
Install on your windows pc
Thank Androxyde and Bin4ry for this kickass tool
3) Download and flash stock 2.1
Go to this thread and download a 2.1 rom in your language of choice (Dont worry that it's not your local ROM)
4) Flash this rom using Flashtool
In the first link there is a how-to. follow it and flash the downloaded ROM from step 3
Once you have 2.1 on your phone,
5) Enable USB Debugging and Root
Use flashtool and root your phone using the simple button "Root" (I know!! what an awesome tool right!!?? )
Once rooted, disconnect the phone.
6) Get yourself a root file manager
Download a file manager capable of root access such as root explorer or solid explorer.
7) Access and edit the build.prop file
Open the file manager. U should get a superuser prompt to allow root access. Touch "Allow". Go to /system and mount the system as RW. there's a file there called build.prop. open it in a text editor. Find all instances of a number that looks like this 1238-9045 (this is my build number, yours will not be the same). Edit this number(all 3 instances) to look like your build number (Found on original box or behind the battery). Save the file and exit
8) Update via SEUS OR PC companion
Now connect your phone back. PC companion or SEUS will tell you there is a new update available. follow the instructions and you'll be running the latest 2.1 for your region and variant of the mini pro
9) [optional] Root and recovery
The new firmware installed by SEUS/PC companion is not rooted. If you need it, root again (same way as in step 5). once rooted, click "Ask root perms" on flashtool. Once root access is confirmed, install xrecovery from the menu.
Hope that helped!
Enjoy
Edit: if you get an error while opening flashtool saying "JVM could not be started because heap size bla bla bla..." Please try on another pc and maybe reinstall windows on urs
Bricked u20i
My phone keeps disconnecting nce the green light goes on. Please help
I have bricked xperia mini x10, and it's failing to boot. Debugging is turned off, so flashboot can't recognize it.
16/010/2012 19:10:31 - INFO - Device connected with USB debugging off
16/010/2012 19:10:31 - INFO - For 2011 devices line, be sure you are not in MTP mode
Click to expand...
Click to collapse
Can someone help?
Immortalis said:
I have bricked xperia mini x10, and it's failing to boot. Debugging is turned off, so flashboot can't recognize it.
Can someone help?
Click to expand...
Click to collapse
Repair it with SEUS or PC Companion.
Step A: leave your phone disconnected from your PC
Step B: Run SEUS/PC Companion, and select update
Step C: It doesn't recognise your phone because it's disconnected and give you a repair option
Step D: Select it, choose your model, it will download the firmware
Step Ea: You get a popup, Press the back-button on your phone while it's off and plug in the USB-Cable
Step Eb: If you can't turn off your phone, plug in the USB-cable and press home- and power-buttons at the same time, it will do a hard reboot and enter flashmode.
Step F: Wait till it's done...
everything past item 3 is pretty hard since we can't acces anything on phone(that's bricking a phone right) to enable usb debugging.
Good tutorial though for those who installed a custom rom and they want to revert to original plus root acces.
Any ideea how to force seus or flash to force flash?
slvjpn said:
everything past item 3 is pretty hard since we can't acces anything on phone(that's bricking a phone right) to enable usb debugging.
Good tutorial though for those who installed a custom rom and they want to revert to original plus root acces.
Any ideea how to force seus or flash to force flash?
Click to expand...
Click to collapse
You don't need usb-debugging in order to flash your phone.
SmG67 said:
You don't need usb-debugging in order to flash your phone.
Click to expand...
Click to collapse
tell this to my sister's x10 pro mini ). I know your right but the phone is @&&&@%))+6)-)-))-=+( up so it doesn't know human comands
Help needed !!
Hi to all,i`m new on this forum and new to Sony Ericsson!
Few days ago i did a repair option with the PcCompanion,becouse i removed to much apk`s.
After about 2 minutes,PcCompanion displayed error (code 100) and stopped flashing!
Searched the internet and found solution!
Flashtool!
But no way it keeps telleing me an error!
17/028/2012 17:28:11 - INFO - <- This level is successfully initialized
17/028/2012 17:28:11 - INFO - Flashtool Version 0.7.0.0 built on 2012-04-14 11:34:01
17/028/2012 17:28:11 - INFO - You can drag and drop ftf files here to start flashing them
17/028/2012 17:28:20 - INFO - Device disconnected
17/028/2012 17:28:38 - INFO - Selected Xperia X10 Mini Pro (U20)_2.1 (2.1.1.A.0.6) Reloaded_Greek (by Leajian).ftf
17/028/2012 17:28:38 - INFO - Preparing files for flashing
17/028/2012 17:28:53 - INFO - Please connect your device into flashmode.
17/029/2012 17:29:01 - INFO - Device connected in flash mode
17/029/2012 17:29:02 - INFO - Opening device for R/W
17/029/2012 17:29:03 - INFO - Reading device information
17/029/2012 17:29:03 - INFO - Phone ready for flashmode operations.
17/029/2012 17:29:03 - INFO - Start Flashing
17/029/2012 17:29:03 - INFO - Flashing loader
17/029/2012 17:29:04 - INFO - Loader : S1_Loader_Root_8e35 - Version : R4A045 / Bootloader status : UNROOTABLE
17/029/2012 17:29:04 - INFO - Flashing fota1.sin
17/029/2012 17:29:04 - INFO - Ending flash session
17/029/2012 17:29:04 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Block verification failed";
17/029/2012 17:29:04 - ERROR - Error flashing. Aborted
17/029/2012 17:29:05 - INFO - Device connected in flash mode
17/029/2012 17:29:07 - INFO - Device disconnected
17/029/2012 17:29:09 - INFO - Device connected in flash mode
please any help will be usefull!
How to bring back alive my X10 Mini Pro?
Now the only thing happends,green blink for 1 second and a bit vibration!
Also tryed with SEUS,no suc6!
(Damn I've been gone a while)
Not too sure of the greek firmware file bro.. can you put the link of the forum where you got it from? are you sure it is a stock firmware?
gixxerfan said:
Hi to all,i`m new on this forum and new to Sony Ericsson!
Few days ago i did a repair option with the PcCompanion,becouse i removed to much apk`s.
After about 2 minutes,PcCompanion displayed error (code 100) and stopped flashing!
Searched the internet and found solution!
Flashtool!
But no way it keeps telleing me an error!
17/028/2012 17:28:11 - INFO - <- This level is successfully initialized
17/028/2012 17:28:11 - INFO - Flashtool Version 0.7.0.0 built on 2012-04-14 11:34:01
17/028/2012 17:28:11 - INFO - You can drag and drop ftf files here to start flashing them
17/028/2012 17:28:20 - INFO - Device disconnected
17/028/2012 17:28:38 - INFO - Selected Xperia X10 Mini Pro (U20)_2.1 (2.1.1.A.0.6) Reloaded_Greek (by Leajian).ftf
17/028/2012 17:28:38 - INFO - Preparing files for flashing
17/028/2012 17:28:53 - INFO - Please connect your device into flashmode.
17/029/2012 17:29:01 - INFO - Device connected in flash mode
17/029/2012 17:29:02 - INFO - Opening device for R/W
17/029/2012 17:29:03 - INFO - Reading device information
17/029/2012 17:29:03 - INFO - Phone ready for flashmode operations.
17/029/2012 17:29:03 - INFO - Start Flashing
17/029/2012 17:29:03 - INFO - Flashing loader
17/029/2012 17:29:04 - INFO - Loader : S1_Loader_Root_8e35 - Version : R4A045 / Bootloader status : UNROOTABLE
17/029/2012 17:29:04 - INFO - Flashing fota1.sin
17/029/2012 17:29:04 - INFO - Ending flash session
17/029/2012 17:29:04 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Block verification failed";
17/029/2012 17:29:04 - ERROR - Error flashing. Aborted
17/029/2012 17:29:05 - INFO - Device connected in flash mode
17/029/2012 17:29:07 - INFO - Device disconnected
17/029/2012 17:29:09 - INFO - Device connected in flash mode
please any help will be usefull!
How to bring back alive my X10 Mini Pro?
Now the only thing happends,green blink for 1 second and a bit vibration!
Also tryed with SEUS,no suc6!
Click to expand...
Click to collapse
cant flash using SEUS...its saying i have latest version but in reality the phone is already bricked by me and not having the original stock firmware... now it just keeps restart with sony erricson logo and turns off again and bootloop...cant root, cant flash... heard that there is some special modified usb that will make the bootloader enter download mode so that we can flash fresh firmware inside it?
jasonmiracle said:
cant flash using SEUS...its saying i have latest version but in reality the phone is already bricked by me and not having the original stock firmware... now it just keeps restart with sony erricson logo and turns off again and bootloop...cant root, cant flash... heard that there is some special modified usb that will make the bootloader enter download mode so that we can flash fresh firmware inside it?
Click to expand...
Click to collapse
You can always flash... post your model and if your bootloader is locked or unlocked ( since you're on SE kernel logo, i assume it's locked), and i can provide you with stock firmware (E10i or U20i) to flash with flashtool.
SmG67 said:
You can always flash... post your model and if your bootloader is locked or unlocked ( since you're on SE kernel logo, i assume it's locked), and i can provide you with stock firmware (E10i or U20i) to flash with flashtool.
Click to expand...
Click to collapse
hi, i am u20i model...i accidentally locked the bootloader while having nna kernel i think, because flashing customised rom and kernel, my phone will enter bootloop, thats why i pressed Restore inside s1tool.exe, which got my bootloader locked....
and now that my bootloader is locked, and i cant root my phone without turning it on( the phone bricked cant turn on anymore) i cant unlock my bootloader to flash new kernels into it... please do provide stock firmware and rom for me... i can only flash stock kernel, but not the rom... after i flashed the stock u20i kernel, i dont know how to flash the original rom into my phone, since now my phone, didnt have the CWM or XRecover anymore, which can browse my SD card, and install the rom from .zip files....
flashing stock kernel no problem but did not know how to flash the stock rom
01/041/2012 15:41:58 - INFO - Device connected in flash mode
01/041/2012 15:41:59 - INFO - Opening device for R/W
01/041/2012 15:41:59 - INFO - Reading device information
01/042/2012 15:42:00 - INFO - Phone ready for flashmode operations.
01/042/2012 15:42:00 - INFO - Start Flashing
01/042/2012 15:42:00 - INFO - Processing loader
01/042/2012 15:42:00 - INFO - Checking header
01/042/2012 15:42:00 - INFO - Flashing data
01/042/2012 15:42:02 - INFO - Loader : S1_Loader_Root_8e35 - Version : R4A045 / Bootloader status : UNROOTABLE
01/042/2012 15:42:02 - INFO - Processing kernel.sin
01/042/2012 15:42:02 - INFO - Checking header
01/042/2012 15:42:02 - INFO - Flashing data
01/042/2012 15:42:05 - INFO - Ending flash session
01/042/2012 15:42:05 - INFO - Flashing finished.
01/042/2012 15:42:05 - INFO - Please unplug and start your phone
01/042/2012 15:42:05 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
01/042/2012 15:42:06 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
unable to flash customised kernel probably because of the locked bootloader
01/052/2012 15:52:27 - INFO - Device connected in flash mode
01/052/2012 15:52:27 - INFO - Opening device for R/W
01/052/2012 15:52:28 - INFO - Reading device information
01/052/2012 15:52:28 - INFO - Phone ready for flashmode operations.
01/052/2012 15:52:28 - INFO - Start Flashing
01/052/2012 15:52:28 - INFO - Processing loader
01/052/2012 15:52:28 - INFO - Checking header
01/052/2012 15:52:28 - INFO - Ending flash session
01/052/2012 15:52:28 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
Click to expand...
Click to collapse
s1tool shows locked bootloader
i1109.photobucket.com/albums/h426/jasonforeverlove/11-2.jpg
problem- cant turn on the phone in order to choose usb debugging mode to root the phone
problem- SEUS cant detect update to my phone...
spent 3 weeks in vail...wish i can get it working ...reli hope to succeed in using customised ROM
jasonmiracle said:
hi, i am u20i model...i accidentally locked the bootloader while having nna kernel i think, because flashing customised rom and kernel, my phone will enter bootloop, thats why i pressed Restore inside s1tool.exe, which got my bootloader locked....
...
spent 3 weeks in vail...wish i can get it working ...reli hope to succeed in using customised ROM
Click to expand...
Click to collapse
Download this, It's the complete SE 2.1 Firmware (Kernel and ROM), flashable with flashtool.
(It's about 213.5MB, although the site may display it's less in your download dialog, but it will keep downloading till it's all there)
SmG67 said:
ubuntuone.com/515oWr7b8j4PeeZfm8xZ1pIt's the complete SE 2.1 Firmware (Kernel and ROM), flashable with flashtool.
(It's about 213.5MB, although the site may display it's less in your download dialog, but it will keep downloading till it's all there)
Click to expand...
Click to collapse
im trying this out... :victory:
tks for the thread, dude
My X10 mini pro won't turn on.
I've try the methods that mentioned in this thread but it all failed.
my phone still won't turn on. if i charged it, it's just boot for 2 seconds and then dead. repeatedly.
any suggestion?
*sorry for bad english
itwasgood said:
My X10 mini pro won't turn on.
I've try the methods that mentioned in this thread but it all failed.
my phone still won't turn on. if i charged it, it's just boot for 2 seconds and then dead. repeatedly.
any suggestion?
*sorry for bad english
Click to expand...
Click to collapse
Repair with Sony Update Service or PC Companion?
SmG67 said:
Repair with Sony Update Service or PC Companion?
Click to expand...
Click to collapse
already tried it. but still it won't turned on.
flashtool does not recognize my phone
flashtool does not recognize my x10 mini pro, screen still remains black, seus and pc companion does not recognize it either. what do i do?:crying:
itwasgood said:
already tried it. but still it won't turned on.
Click to expand...
Click to collapse
Your tried to unlock your booloader and now dont turn on?
If your phones was manufacturated after 11w29, you got a hard brick.
Hi,
My X10 mini (E10i) was rooted some months ago.
I decide to install miniCM7.2, so I succesfully unlock the bootloader, then kernel flashing appears to be ok, but when I reboot it, it show a new big logo, and after a while, a kind of animated background was visible. But it loop indefinitely on this animation, freeze, screen become blank, then reloop ...
I can't reboot it, I can't remove the batterie (it's hidden into the device)
Help !
Here the logs:
11/018/2012 20:18:58 - INFO - <- This level is successfully initialized
11/018/2012 20:18:58 - INFO - Flashtool Version 0.6.7.0 built on 2012-01-21 17:31:40
11/018/2012 20:18:58 - INFO - You can drag and drop ftf files here to start flashing them
11/019/2012 20:19:03 - INFO - Device disconnected
11/019/2012 20:19:24 - INFO - Selected E10_nAa-11_2.6.29.6-nAa-11.ftf
11/019/2012 20:19:24 - INFO - Preparing files for flashing
11/019/2012 20:19:24 - INFO - Please connect your device into flashmode.
11/020/2012 20:20:12 - INFO - Device connected in flash mode
11/020/2012 20:20:12 - INFO - Opening device for R/W
11/020/2012 20:20:13 - INFO - Reading device information
11/020/2012 20:20:13 - INFO - Phone reading for flashing.
11/020/2012 20:20:13 - INFO - Start Flashing
11/020/2012 20:20:13 - INFO - Flashing loader
11/020/2012 20:20:14 - INFO - Loader version : r4A060 / Bootloader status : ROOTED
11/020/2012 20:20:14 - INFO - Flashing kernel.sin
11/020/2012 20:20:16 - INFO - Flashing finished.
11/020/2012 20:20:16 - INFO - Please wait. Phone will reboot
11/020/2012 20:20:16 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
11/020/2012 20:20:16 - INFO - Device connected in flash mode
11/020/2012 20:20:18 - INFO - Device disconnected
11/020/2012 20:20:20 - INFO - Device connected in flash mode
11/020/2012 20:20:34 - INFO - Device disconnected
11/020/2012 20:20:42 - INFO - Device connected with USB debugging off
11/020/2012 20:20:42 - INFO - For 2011 devices line, be sure you are not in MTP mode
after that I receive no more message, and after several minutes I disconnect and reboot my phone.
when the big naa logo appears try hitting the back button to enter recovery mode. then flash your rom and gapps, wipe/fact reset then reboot. that i hope should fix the loop
demoniacs said:
when the big naa logo appears try hitting the back button to enter recovery mode. then flash your rom and gapps, wipe/fact reset then reboot. that i hope should fix the loop
Click to expand...
Click to collapse
I will, but for the moment it loop but it probably not reboot in loop, since I seen the logo once. And now it's only the screen animation that run 2 seconds, stop, black screen, and loop on screen animation with different colors
rafal98 said:
I will, but for the moment it loop but it probably not reboot in loop, since I seen the logo once. And now it's only the screen animation that run 2 seconds, stop, black screen, and loop on screen animation with different colors
Click to expand...
Click to collapse
Re-flash to stock.
Make sure you garbed the correct downloads.. re-read instructions.
unlocked bootloader? While in bootloop zone,press and hold power button + middle button.phone should reboot, and u can go to recovery and install ROM
Again, how to reflash in the current situation ?
The good news is that flashtool detect the phone, but I can't reflash because I can't shutdown the phone ...
Do first things what i say, if that not work, u should reflash to stock rom with SEUS, with repair mode.
I miss your first post. In fact I wait all the night that battery become empty, and run flashtool, push foward and plug. I probably wait 5' that the phone has enought energy, then flashtool detect the phone and flash it with the stock kernel.
And it's works !!!!
note: the colored screen animation that was looping, was in fact the Sony Ericson logo presentation during the boot
Recover X10i
XTacDK said:
unlocked bootloader? While in bootloop zone,press and hold power button + middle button.phone should reboot, and u can go to recovery and install ROM
Click to expand...
Click to collapse
Thanks. This has worked to reinstall a ROM on my SE Xperia X10 Mini
Hey there,
I have a similar problem here, but I can't solve It.
Did a Hard Reset by pressing the Power key and Home Key. I also tried to click the Reset button under the phone cover near the IMEI codetag thing.
I have tried to use the X10FlashTool, SEUS (it only says that i have the newest software already)
When I try to start the phone all i can see is a black screen and nothing else.
Any more solutions i can try?
rafal98 said:
Hi,
My X10 mini (E10i) was rooted some months ago.
I decide to install miniCM7.2, so I succesfully unlock the bootloader, then kernel flashing appears to be ok, but when I reboot it, it show a new big logo, and after a while, a kind of animated background was visible. But it loop indefinitely on this animation, freeze, screen become blank, then reloop ...
I can't reboot it, I can't remove the batterie (it's hidden into the device)
Help !
Here the logs:
11/018/2012 20:18:58 - INFO - <- This level is successfully initialized
11/018/2012 20:18:58 - INFO - Flashtool Version 0.6.7.0 built on 2012-01-21 17:31:40
11/018/2012 20:18:58 - INFO - You can drag and drop ftf files here to start flashing them
11/019/2012 20:19:03 - INFO - Device disconnected
11/019/2012 20:19:24 - INFO - Selected E10_nAa-11_2.6.29.6-nAa-11.ftf
11/019/2012 20:19:24 - INFO - Preparing files for flashing
11/019/2012 20:19:24 - INFO - Please connect your device into flashmode.
11/020/2012 20:20:12 - INFO - Device connected in flash mode
11/020/2012 20:20:12 - INFO - Opening device for R/W
11/020/2012 20:20:13 - INFO - Reading device information
11/020/2012 20:20:13 - INFO - Phone reading for flashing.
11/020/2012 20:20:13 - INFO - Start Flashing
11/020/2012 20:20:13 - INFO - Flashing loader
11/020/2012 20:20:14 - INFO - Loader version : r4A060 / Bootloader status : ROOTED
11/020/2012 20:20:14 - INFO - Flashing kernel.sin
11/020/2012 20:20:16 - INFO - Flashing finished.
11/020/2012 20:20:16 - INFO - Please wait. Phone will reboot
11/020/2012 20:20:16 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
11/020/2012 20:20:16 - INFO - Device connected in flash mode
11/020/2012 20:20:18 - INFO - Device disconnected
11/020/2012 20:20:20 - INFO - Device connected in flash mode
11/020/2012 20:20:34 - INFO - Device disconnected
11/020/2012 20:20:42 - INFO - Device connected with USB debugging off
11/020/2012 20:20:42 - INFO - For 2011 devices line, be sure you are not in MTP mode
after that I receive no more message, and after several minutes I disconnect and reboot my phone.
Click to expand...
Click to collapse
i have same problem after try to flash naa kernel
same message, not my device but my gf device (x10 mini pro)
and flash over sony companion over internet
take a time but it works
the device back to stock rom, i try to flash to custom rom, but every custom rom need naa kernel
and i tried twice to flash it and failed like your message
anyone can solve my problem?
now using cyanocream sandwich (cant connect to 3g and no radio)
After flashing with nAa v11 .....My x10 mini got hard bricked.......Just a RED led appears with blank screen.....Any help guys????
Pradee265254 said:
After flashing with nAa v11 .....My x10 mini got hard bricked.......Just a RED led appears with blank screen.....Any help guys????
Click to expand...
Click to collapse
flash it with SEUS over internet
it will make your device back to stock rom
No phone connected to the computer
Try whith SE PC Suite
- Support Zone
- Start the update of the phones software
- There will be a pop up stating the phone was not found, on this pop up there is a link to "repair the phone" click it and then connect your phone in flash mode.
See screenshot.
Do a factory reset
Sent from my E10i using XDA
Dear All,
I beg your help for solving the following problem (already browsed for similar topics, no luck).
Here a brief history of the mess I have been doing:
I had installed Cyanogenmod (Worked)
I had flashed back a Stock ROM (ST15i_4.0.A.2.368__GENERIC_(1244-2098).ftf) (Worked)
Even though I knew that was not a good idea, I updated the software (as requested by android) (Bricked)
I have tried to re-flash using the same Stock ROM has worked before, with the result you can read below.
11/031/2012 19:31:43 - INFO - Device connected in flash mode
11/031/2012 19:31:59 - INFO - Selected ST15i_4.0.A.2.368__GENERIC_(1244-2098).ftf
11/031/2012 19:31:59 - INFO - Preparing files for flashing
11/032/2012 19:32:01 - INFO - Please connect your device into flashmode.
11/032/2012 19:32:01 - INFO - Opening device for R/W
11/032/2012 19:32:02 - INFO - Reading device information
11/032/2012 19:32:02 - INFO - Phone reading for flashing.
11/032/2012 19:32:02 - INFO - Start Flashing
11/032/2012 19:32:02 - INFO - Flashing loader
11/032/2012 19:32:04 - INFO - Loader version : R4A066 / Bootloader status : ROOTED
11/032/2012 19:32:04 - INFO - Flashing adsp.sin
11/032/2012 19:32:07 - INFO - Flashing kernel.sin
11/032/2012 19:32:09 - INFO - Flashing amss_fs.sin
11/032/2012 19:32:09 - INFO - Flashing fota1.sin
11/032/2012 19:32:10 - INFO - Flashing fota0.sin
11/032/2012 19:32:10 - INFO - Flashing apps_log.sin
11/032/2012 19:32:10 - INFO - Flashing amss.sin
11/032/2012 19:32:19 - INFO - Flashing cache.sin
11/032/2012 19:32:20 - INFO - Flashing system.sin
11/034/2012 19:34:12 - INFO - Flashing userdata.sin
11/034/2012 19:34:15 - INFO - Flashing finished.
11/034/2012 19:34:15 - INFO - Please wait. Phone will reboot
11/034/2012 19:34:15 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
11/034/2012 19:34:16 - INFO - Device connected in flash mode
11/034/2012 19:34:17 - INFO - Device disconnected
11/034/2012 19:34:18 - INFO - Device connected in flash mode
11/034/2012 19:34:59 - INFO - Device disconnected
11/035/2012 19:35:01 - INFO - Device connected in flash mode
11/035/2012 19:35:41 - INFO - Device disconnected
11/035/2012 19:35:42 - INFO - Device connected in flash mode
11/036/2012 19:36:23 - INFO - Device disconnected
11/036/2012 19:36:24 - INFO - Device connected in flash mode
11/037/2012 19:37:04 - INFO - Device disconnected
Click to expand...
Click to collapse
The Symptoms are the following:
Device not booting, when pressing the power button the phone vibrates for one second, nothing happens. The green light blinks.
When connecting the phone to the PC, it immediately starts the flashmode
When trying to connect it in fastboot mode (blue light) nothing happens. After releasing the up volume button, the phone connects in flashmode
When trying to use PC Companion, I get a window asking for unplugging the phone, remove the battery, insert the battery again and reboot. It does not reboot
When being connected with the PC, the phone exits and reenters the the flashmode each 1 minute.
I know I am just the N-th noob asking for help, but any hint is highly appreciated!
Regards,
Luca
P.s.: Sorry if some terms were not appropriate, I am not an expert
Unlocked bootloader and installing updates -> "Bricked"
There is a solution to this, need to find the right topic on the forum.
Someguyfromhell said:
Unlocked bootloader and installing updates -> "Bricked"
There is a solution to this, need to find the right topic on the forum.
Click to expand...
Click to collapse
Hey Someguyfromhell,
you made my day, my mobile phone is alive again
There is still one question, is there a solution to allow the updates to be installed again? Maybe by relock the bootloader or using the PC Companion?
Thanks a lot again!
http://forum.xda-developers.com/showpost.php?p=16659481&postcount=33 and look in the post for D) Relocking.
Seems, that if you used test point method, you can also relock via S1tool.
After that you can reflash stock firmware.
Almost same symptoms
Hi, I also think I've bricked my st15i.
What I've done:
-Unlocked bootloader
-Rooted
-Flashed custom rom
-Everything was working
Then with no reason, the phone started rebooting. It managed to boot and after 10sec - 1min it restarted again.
To solve this I:
- flashed stock rom and it stopped rebooting but as soon as I plugged it off the usb it rebooted and could not boot (it was looping sony logo and back).
- flashed other stock firmware, the same results
- now when connecting it to pc it goes directly to flashmode
- I can enter fastboot mode as well
- When pressing power button green led blinks
- tried flashing stock firmware again and then both the xperia_relock_bootloader.ftf and Xperia 2011 Range_FreeXperia_ALL.ftf with no results
- when connected to pc it goes only to flashmode (Can't make it to start)
- when pluged in the socket it starts looping up to sony logo
- when not pluged at all when I press power button, green led blinks
I hope you can make any sense out of this because I can't, and I've been trying solutions the past 36hours!!
Please...help!!
hi friends
i was trying to update xperia mini pro sk17i (1250-3615) to ICS official
it went well phone booted to ICS but i wanted to root it. (rooting failed even when in GB with all the possible methods Doomlord/Xperia-root/flashtool )
then triend to collect all the files from firmware folder of sony pc companion and made a ftf file using flashtool decrypt /bundle .
flashed it worked fine for first two times... then unlocked the boot loader using sony unlock code from the site.
now .. i was trying different kernel / pre rooted and was boot looping .. so flashed back to .431 ftf and laptop just went off towards the end.
phone not powering on. not recognised as a usb device. But once in a while it comes to flash mode ( green light vol-down usb state ) and i finally was able to use flashtool and this much happened
12/014/2012 13:14:26 - INFO - <- This level is successfully initialized
12/014/2012 13:14:26 - INFO - Flashtool Version 0.8.6.0 built on 2012-06-13 08:08:54
12/014/2012 13:14:26 - INFO - You can drag and drop ftf files here to start flashing them
12/014/2012 13:14:31 - INFO - Device connected in flash mode
12/014/2012 13:14:45 - INFO - Selected SK17i_4.1.B.0.431__1250-3615_.ftf
12/014/2012 13:14:45 - INFO - Preparing files for flashing
12/015/2012 13:15:00 - INFO - Device disconnected
12/015/2012 13:15:01 - INFO - Please connect your device into flashmode.
12/017/2012 13:17:09 - INFO - Device connected in flash mode
12/017/2012 13:17:09 - INFO - Opening device for R/W
12/017/2012 13:17:09 - INFO - Reading device information
12/017/2012 13:17:09 - INFO - Phone ready for flashmode operations.
12/017/2012 13:17:10 - INFO - Start Flashing
12/017/2012 13:17:10 - INFO - Flashing loader
12/017/2012 13:17:12 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Bootloader status : ROOTED
12/017/2012 13:17:12 - WARN - This file is ignored : simlock.ta
12/017/2012 13:17:12 - INFO - Flashing kernel.sin
12/017/2012 13:17:15 - INFO - Flashing fota1.sin
12/017/2012 13:17:15 - INFO - Flashing fota0.sin
12/017/2012 13:17:16 - INFO - Flashing adsp.sin
12/017/2012 13:17:19 - INFO - Flashing amss_fs_mango.sin
12/017/2012 13:17:19 - INFO - Flashing amss.sin
12/017/2012 13:17:28 - INFO - Flashing apps_log.sin
12/017/2012 13:17:28 - INFO - Flashing system.sin
12/020/2012 13:20:28 - INFO - Flashing userdata.sin
12/020/2012 13:20:31 - INFO - Flashing cache.sin
12/020/2012 13:20:31 - INFO - Ending flash session
12/020/2012 13:20:31 - INFO - Flashing finished.
12/020/2012 13:20:31 - INFO - Please wait. Phone will reboot
12/020/2012 13:20:31 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
12/020/2012 13:20:32 - INFO - Device connected in flash mode
12/020/2012 13:20:54 - INFO - Device disconnected
12/023/2012 13:23:17 - INFO - Log written to E:\Flashtool\flashtool_2012-07-12_01-14-26.log
Click to expand...
Click to collapse
but still phone not powering on.. its the red light blinks 3 to 4 times and nothing happens.please shed some light
my own phone is FIH FBO (huawei x6 variant ) and i am active in that section... i have tried all the possible recovery methods i can find..
Did you try repairing with PC Companion after the last flashing session?
Don't know how much it would help, though.
1º Usually when you have the 3 red blink means no battery. You have to put your phone charging and nothing will appear on screen. Only after 10 or 20 minutes when battery reach good level.
2º If point 1 is not enough probably you installed kernel for custom rom that might be not compatible with the version you flashed. Try to go to Fastboot mode (blue light vol-up usb state) and install original kernel.
Good Luck
(i'm quite sure is the battery,if you can just grab a voltimeter and check your battery, if value is lower than 3,8v for sure you need to charge|)
thanks buddy for the quick response ..connected it to the charger keeping it for some time(but it was always connected to laptop usb whole time ). lets hope its the battery now. But i have done some cross flashing too earlier.
can you please point me to the original kernel. (but blue light fastboot mode too not coming up now. )
for this particular phone all the threads are so messed up reading finding each compatible ones is taking so much time.. most of the links are dead /suspended too.
sometimes when i flash this (SK17i_4.0.2.A.0.62_Baseband+Kernel.ftf) i get to the sony splash screen and xperia it will show and keep boot looping ..this guy here also tried the same had similar outcome. This thread
Feanor88 said:
Did you try repairing with PC Companion after the last flashing session?
Don't know how much it would help, though.
Click to expand...
Click to collapse
yes one time i got a repair option and i tried it. says the phone has a modified rom / so repair is not possible. (mostly because of the kernel +baseband flash ) and its very rarely comes to flash mode.
brov just reflash but dont use Flashtool v0.8.6, use v0.8.5 but make yhu charge tha phone first...
this is the latest happening ... and i strongly believe its the battery
12/018/2012 15:18:12 - INFO - <- This level is successfully initialized
12/018/2012 15:18:12 - INFO - Flashtool Version 0.8.6.0 built on 2012-06-13 08:08:54
12/018/2012 15:18:12 - INFO - You can drag and drop ftf files here to start flashing them
12/018/2012 15:18:18 - INFO - Device disconnected
12/018/2012 15:18:24 - INFO - Device connected in flash mode
12/018/2012 15:18:49 - INFO - Selected Xperia MiniPro (SK17i)_4.0.2.A.0.42_HU.ftf
12/018/2012 15:18:49 - INFO - Preparing files for flashing
12/019/2012 15:19:00 - INFO - Please connect your device into flashmode.
12/019/2012 15:19:01 - INFO - Opening device for R/W
12/019/2012 15:19:02 - INFO - Reading device information
12/019/2012 15:19:04 - INFO - Start Flashing
12/019/2012 15:19:04 - INFO - Flashing loader
12/019/2012 15:19:04 - INFO - Ending flash session
12/019/2012 15:19:04 - ERROR -
12/019/2012 15:19:04 - ERROR - Error flashing. Aborted
12/019/2012 15:19:04 - INFO - Device disconnected
12/020/2012 15:20:48 - INFO - Device connected with USB debugging off
12/020/2012 15:20:48 - INFO - For 2011 devices line, be sure you are not in MTP mode
12/021/2012 15:21:07 - INFO - Device disconnected
Click to expand...
Click to collapse
i just saw the phone booting into splash / xperia / and then i heard saw the android home for a sec and battery went down phone got off.
kept for charging
thanks buddies... one thing is sure battery was down.. i was thinking its full charged since plugged to pc whole night. (wrong !!) then the second thought is .. does the recent booting into android home mean ( 12/019/2012 15:19:04 - INFO - Flashing loader) a temporary boot from the new kernel ? still hope is there rite ??
zailer said:
thanks buddy for the quick response ..connected it to the charger keeping it for some time(but it was always connected to laptop usb whole time ). lets hope its the battery now. But i have done some cross flashing too earlier.
can you please point me to the original kernel. (but blue light fastboot mode too not coming up now. )
for this particular phone all the threads are so messed up reading finding each compatible ones is taking so much time.. most of the links are dead /suspended too.
sometimes when i flash this (SK17i_4.0.2.A.0.62_Baseband+Kernel.ftf) i get to the sony splash screen and xperia it will show and keep boot looping ..this guy here also tried the same had similar outcome. This thread
yes one time i got a repair option and i tried it. says the phone has a modified rom / so repair is not possible. (mostly because of the kernel +baseband flash ) and its very rarely comes to flash mode.
Click to expand...
Click to collapse
If you would read correctly, then you would see that .ftf file included only Baseband and Kernel, nothing more, nothing less.
zailer said:
this is the latest happening ... and i strongly believe its the battery
i just saw the phone booting into splash / xperia / and then i heard saw the android home for a sec and battery went down phone got off.
kept for charging
thanks buddies... one thing is sure battery was down.. i was thinking its full charged since plugged to pc whole night. (wrong !!) then the second thought is .. does the recent booting into android home mean ( 12/019/2012 15:19:04 - INFO - Flashing loader) a temporary boot from the new kernel ? still hope is there rite ??
Click to expand...
Click to collapse
Remove USB cable, choose the .ftf file with Flashtool, connect the phone in flashmode when Flashtool asks it.