Installed latest version of CWM..made backup of original rom...Rebooted System...No problem...Flashed CM9 per instructions...Full Wipe...Played with it for awhile...Backed it up...tried to restore Stock Rom ...went into CWM loop...Read a lot of threads and I still have drivers and Asus is seen in Device Manager with ADB Interface...So I tried Command prompts for 1a...and what I get is 'adb' is not recognized as an internal or external command,operable program or batch file...
Am I typin the command right ???...I never used ADB before...Came over from Epic Touch 4g Forum here...and I only used Odin...Could someone give me a clue if on on the right path of Unbrickin this thing...
Thanx...
BTW its Unlocked and of course rooted...
Your salvation is at hand:
http://dottech.org/tipsntricks/2153...ows-computer-for-use-with-your-android-phone/
Follow this guide. To the letter, very important you set the path correctly in the environment variables or you'll be going around in circles. Once it's done, you'll have a working ADB and fastboot environment, you will also want the "Universal naked USB driver" which can be found on this site.
Once you've got that up and running, try getting your system into fastboot protocol and type fastboot -i 0x0b05 reboot, if that works, then you've access to ADB and fastboot protocols, follow the commands given in solution 1a then to complete your recovery.
Hope this helps.
Hobbesian said:
Your salvation is at hand:
http://dottech.org/tipsntricks/2153...ows-computer-for-use-with-your-android-phone/
Follow this guide. To the letter, very important you set the path correctly in the environment variables or you'll be going around in circles. Once it's done, you'll have a working ADB and fastboot environment, you will also want the "Universal naked USB driver" which can be found on this site.
Once you've got that up and running, try getting your system into fastboot protocol and type fastboot -i 0x0b05 reboot, if that works, then you've access to ADB and fastboot protocols, follow the commands given in solution 1a then to complete your recovery.
Hope this helps.
Click to expand...
Click to collapse
Yep it was a Nandroid Backup...Im not at all familiar with ADB ...Just Odin which I use Rooting Phones...Ill give it a try...This is drivin me nuts...Just cant get ADB to work for me thru commands...Ill definitely do what you suggest...Thanx a lot Ill let ya know what happens...
Still gettin this when I run a command prompt
adb is not recognized as an internal or external command,operable program or batch file..Says the same for fastboot...Am I typin the commands right...
Installed driver and extracted the files from the download to my c part of the drive...Do I have to open anything in the download folder inorder for it to work or just extract everything like I did...
Didnt have the path of the extracted files in the right spot...Just had to change it...Wurked fine...Up and Runnin...Thanx a lot...Really appreciate it...
Help
ronny71 said:
Didnt have the path of the extracted files in the right spot...Just had to change it...Wurked fine...Up and Runnin...Thanx a lot...Really appreciate it...
Click to expand...
Click to collapse
What did you do? What files? I did literally the EXACT same thing to my prime. Please help. (Idk what to do with this driver download)
chrsbrrss said:
What did you do? What files? I did literally the EXACT same thing to my prime. Please help. (Idk what to do with this driver download)
Click to expand...
Click to collapse
Extract it if you haven't already.... put your prime into recovery .... plug it into the pc... in device manager find the prime and update the driver manually... point windows to the driver and your there...
For adb... you need to download that too I use the one in the nvfashpack... so... you extract the file.. with the window open... press and hold shift then right click in the window (nvflashpack folder, where the adb.exe file is) and select open command prompt here. Now you can use the adb commands... if your trying to push a file...it is best to put it in the same folder (nvflashpack)
Related
i downloaded the sdk and i downloaded a samsung galaxy driver and when i look for my phone in the command line it just doesnt show up. theunlockt just isnt helping. anybody got a good link for dummies?
antonio91282 said:
i downloaded the sdk and i downloaded a samsung galaxy driver and when i look for my phone in the command line it just doesnt show up. theunlockt just isnt helping. anybody got a good link for dummies?
Click to expand...
Click to collapse
Did you put your phone in debug? Settings>Applications>Development
yes. and i been going over the directions repeatedly on theunlockr. im running xp 32 i believe
ADB for Dummies: Download http://de.codeplex.com/
- Once installed... open command prompt:
cd C:\Program Files\Droid Explorer\SDK\tools
Click to expand...
Click to collapse
- <type your ADB command here> e.g.
adb shell
Click to expand...
Click to collapse
^ yeah...
adb devices
Click to expand...
Click to collapse
should show your device...
To the OP, I don't know if this is the case for you but I changed my path on my Windows PC like the guides said to and that didnt completely work. (Maybe neede a restart). But in any case if you go to the command prompt, change directories to were you have adb and run your commands from there, it works like a charm.
For example if you unzip the the SDK in your download directory, open up the command line and type:
cd C:\Documents and Settings\<your user name>\Downloads\<whatever-you-named-the-unzipped-folder>\tools
ADB is in the tools directory you just went to. From here you can run the adb command without having to set up the system paths. This is a quick and dirty explanantion and might not even work for you. I was running this on Windows XP when I had this problem. Same thing had to be done on my Ubuntu Linux box b/c I'm to lazy to set up paths on that one, lol.
zephiK said:
ADB for Dummies: Download http://de.codeplex.com/
- Once installed... open command prompt:
- <type your ADB command here> e.g.
Click to expand...
Click to collapse
Oops, didnt see that you allready posted this. Yea do what zephiK says and it should work.
i have not been able to get adb to work no matter what i did (i am using xp) and i have been trying since i had the htc magic last year. here is how i recently got it working.
i downloaded the one-click root zip file and unzipped it. inside there is a adb.exe file. i clicked it and then then made sure my phone was in debugging mode and connected to my pc and used the command prompt to point to where adb is in my android sdk which for me is cd\androidsdk\tools
adb devices
i hit enter after tools and enter after devices and now it works. not sure why but it does. i couldnt get my magic, my nexus one or even the galaxy to work until i did this.
i got everything done. i think? only problem is im getting $ sign instead of # sign. any ideas?
i got adb working. thanks everyone.
A thread success story without any casualties. Almost makes me weep.
It might seem a bit stupid, but maybe others will encounter one of this issues and it will help them. your more than welcome at add to this.
P: computer wont recognize device in debug mode. instead it recognizes "android 1.0" or something else.
S: download HTC sync. it contains the proper drivers.
P: while activating the *.bat file you get the erroe "adb out of date...killing". the script will run all the way, but root access wont be given.
s: you need to close all adb processes from task manager, and the htcsync process as well (on PC)! also, you need to reflash the img file, and try rooting again.
HTC SYNC
after 10 attempts at ROOT, I found this tread. It is CRITICAL that you stop the HTCSync process on you PC or root will not work!
HTC Sync on the tab or on the pc? I killed it on the tab through the running applications. To kill adb processes just close the command window on the pc.
you need to kill it on the PC.
Ok so noob question of the day!
Where are you supposed to input the commands (such as adb reboot bootloader) to start the kernel flash process? I tried in cmd as well as terminal emulator on the tablet with no luck, what am I missing here?
NJFM said:
Ok so noob question of the day!
Where are you supposed to input the commands (such as adb reboot bootloader) to start the kernel flash process? I tried in cmd as well as terminal emulator on the tablet with no luck, what am I missing here?
Click to expand...
Click to collapse
you should have ADB in your c:\android folder, or wherever your sdk is installed.
Do a search for adb with your pc to find out where you installed it.
then using the command prompt under start> programs> accessories> command prompt, go to the corrected directory that ADB is in.
to go to C:\android, for example, type " cd c:\android "
Then you would execute the adb commands, (example: adb reboot bootloader)
Go to youtube and search for a 'how to use ADB' tutorial.
I'm having difficulty hotbooting the insecure kernel.
I've uninstalled HTC Sync on my PC, and I've downloaded the insecure kernel to my SD card's root directory.
I have no problem rebooting the bootloader via adb, and my device is detected. However, when I try to hotboot the kernel, I routinely get a "cannot load" response. I'm typing in "fastboot boot [filename].img."
Suggestions?
Many thanks.
the insecure kernel shouldn't go to the SD card. only the wifi module should.
the *.img file should go to the adb\tools directory,
(maybe you can put it anywhere else and just write the full path while flashing, i'm not sure. i just copy this files to the tools directory and flash them from there. easiest way)
the flash command flashes the file from the directory on the computer to the device.
Thanks very much!
I'm sitting here laughing to myself because I'd tried changing the path in the command to a couple of places I'd placed the insecure kernel in my PC; the c: root directory and a directory I'd created to house downloaded Jetstream files. Obviously, neither worked.
Placing it in the adb\tools directory makes complete sense.
By the way, your mention of the "wifi module" sent me back to DooMLoRD's kernel thread. I see that you flashed the kernel and related wifi module on 1/4. Like others who posted, are you pleased with the kernel?
Thanks, again!
The kernel seems very nice and almost no one complaind.
Sent from my GT-I9000 using XDA App
Hello Everyone,
New to the rooting Droids, but have an understanding of them. I have jailbroken all Apple products which i got tired of. Now i finally got myself the New DNA phone with verizon. my dilemma is i dont know how to get the bootloader unlocked http://forum.xda-developers.com/showthread.php?t=2109862 i read through this link on how to do so. but it just gives u the link to download the apk file but no idea on what to do next with it? which also ive been reading off this site how to root my phone. http://forum.xda-developers.com/showthread.php?t=2000896
I need of a bit of help if anyone has a min to help me that would be great.
what i dont understand off the first link what to do with the apk file do i put the zip file right on my DNA drive? or run it off the pc?? if so what programs do i need on my computer to unlock my bootloader.
"
What you need:
1.) a Droid DNA
2.) this attached APK
Instructions:
1.) Download apk (attached, cid.apk)
2.) run it (in your app drawer titled HTC DNA SuperCID
3.) reboot to bootloader and confirm you have SuperCID:
a.) fastboot oem readcid
"
that is all the post contains on how to get the supercid?
thanks again!
1. Access XDA from your phone and download the app. (It will show up in your downloads)
2. Install the app by opening it
3. Here's where I believe your main issue/question is. You need Android SDK, if you don't have it installed you can get it Here
4. Follow the instructions and set that up
5. Hold your power button and down on the volume rocker till your phone goes into the bootloader.
6. Plug your phone into your computer
7. While in CMD Prompt type Fastboot oem readcid and hit enter.
8. if you get a response along the lines of 111111 you're good to go.
9. Head over to HTCDev.com and follow the steps they give you
10. After following those steps your bootloader will be Unlocked
11. Flash CWM or TWRP (recoveries) [There are instructions in those threads on how to do that]
12. You should then be good to go and flash ROM's, etc.
access the XDA from the first link? i posted?? on myphone?
ok downloaded to my phone and installed the Apk file
Yes. From your phone go to the link with the apk. Click on the download for that apk, and it will show up on your phone.
ok i now i have it installed and booted to the bootloader screen, which i selected fastboot, and now i have the CMD open but the command you told me to input doesnt work just error message saying "fastboot" is not recongnized. i also have the adt extracted on my desktop.
xd4v3x said:
ok i now i have it installed and booted to the bootloader screen, which i selected fastboot, and now i have the CMD open but the command you told me to input doesnt work just error message saying "fastboot" is not recongnized. i also have the adt extracted on my desktop.
Click to expand...
Click to collapse
Fastboot is an ADB command. Did you install the android SDK to your computer, and follow the guide on how to set it up?
Edit:
Here's a guide on how to setup the SDK Guide
yes it completly installed for the APK software, so i used the "abd" command instead of the word fastboot?
xd4v3x said:
yes it completly installed for the APK software, so i used the "abd" command instead of the word fastboot?
Click to expand...
Click to collapse
Did you set the platform-tools folder to the root of your C: Drive? ADB (my bad, not ABD) uses commands. Fastboot is one of the commands it uses to talk to the phone. If you don't set it up correctly the command: Fastboot will not be recognizable. Double check with the guide I posted, that you have everything correctly setup.
yes i have it in C:\android-sdk-windows
but all i see in the folder is .metadata....
xd4v3x said:
yes i have it in C:\android-sdk-windows
but all i see in the folder is .metadata....
Click to expand...
Click to collapse
Ok, a couple questions...
1. Did you install HTC Sync? That installs the HTC drivers to your computer.
2. What version of Windowns (if you're on windows) are you running?
Yes i install the htc sync and i am running windows 7 x64.
xd4v3x said:
Yes i install the htc sync and i am running windows 7 x64.
Click to expand...
Click to collapse
Ok, go into the sdk folders. There should be a little android icon that says Android SDK or something along those lines. Open that up and it should ask you if you want to install some drivers. You need to install those. Once you do that everything should work.
OverDroid5 said:
Ok, go into the sdk folders. There should be a little android icon that says Android SDK or something along those lines. Open that up and it should ask you if you want to install some drivers. You need to install those. Once you do that everything should work.
Click to expand...
Click to collapse
I have thanked a couple of your posts because the OP hasn't and you have gone out of your way
ok so far what I have setup:
installed phone drivers on the wndows 7 - htc sync.
installed the CID.apk file on my phone.
installed the sdk software on my windows 7 64bit.
I reboot the phone to the bootloader screen.
but cant get the command prompt to work by using the "fast oem readcid"
what am I missing? I keep getting an error when running that command.
thanks again for everyone help so far.
You have to be in a folder that has the fastboot.exe file. Or you need to update your windows path so it recognizes the android sdk folders.
Your best bet is to create a new folder in C:\. For example C:\HTCbootloader. Then copy fastboot.exe, adb.exe, and AdbWinApi.dll into it. Then when you run 'cmd', type 'cd HTCbootloader'. From that point you should be able to type 'fastboot oem readcid'.
thanks I try that when I get home.
betterthancrimzon said:
You have to be in a folder that has the fastboot.exe file. Or you need to update your windows path so it recognizes the android sdk folders.
Your best bet is to create a new folder in C:\. For example C:\HTCbootloader. Then copy fastboot.exe, adb.exe, and AdbWinApi.dll into it. Then when you run 'cmd', type 'cd HTCbootloader'. From that point you should be able to type 'fastboot oem readcid'.
Click to expand...
Click to collapse
This is correct. Also to setup a set path that you can access anywhere.
1. Right click on "Computer"
2. Go to properties
3. Click on Advanced System Settings
4. Click on Environmental Variables
5. In System Variables, Scroll to PATH
6. Select it and hit Edit
7. Do not change anything, in the current string, instead go to the very end
8. No spaces from where it ends. ;C:\(whatever you named the file with fastboot.exe, adb.exe, and AdbWinApi.dll)
9. Click ok, and you have a path setup, so no matter where you access cmd prompt from you can use adb commands.
I apologize by attempting to hijack this thread but the advice in here is superb... Alright gentleman I could use some help, I got my code from HTC and have followed the instructions with the utmost precision including the verification of my paths (using the same folder from the previous CMD during the unlock process) but no matter what I do I get the error...
"cannot load *** bin unknown error". Any ideas?
ok so i finally got the fastboot oem readcid, and it read 11111111 so im in a good spot so far.. but now i dont see any where, on whats the command to get the token. on this forum page. http://forum.xda-developers.com/showthread.php?t=2000896
thanks again!
xd4v3x said:
ok so i finally got the fastboot oem readcid, and it read 11111111 so im in a good spot so far.. but now i dont see any where, on whats the command to get the token. on this forum page. http://forum.xda-developers.com/showthread.php?t=2000896
thanks again!
Click to expand...
Click to collapse
Ok, Now that you have it reading 11111111 head over to HTCdev.com and follow the steps there. You're going to go to unlock bootloader and select other supported devices. It will guide you on how to get the token as well as how to unlock the bootloader.
Hi guys,
EDIT: See the last posts - I have figured this out, and tried to include helpful information, if you are having this problem too.
Firstly please accept my apologies if this has been answered already. I have searched the forum, and the Internet, and cant find specific instructions, or a guide that I can follow with any success.
I stupidly deleted system files from my Kindle, but now I have purchased a fastboot cable, and I'am able to get it into fastboot mode.
I have correctly installed the ADB Drivers, and the device is now recognized by my Windows 7 Device Manager. It shows 'Android ADB Interface'.
I would guess that I need to flash the entire Kindle, but I'm unsure of how to do this, as I cannot seem to access the device at all. It currently loops when booting, giving me no time to see it as external storage via My Computer.
Please would someone more versed in this, guide me specifically through how to get myself back up and running again? I would be forever greatful.
I have SDK and JDK installed, but do not have the knowledge I need to learn how to use them properly.
Thanks so much in advance.
urbainmenace said:
Hi guys,
Firstly please accept my apologies if this has been answered already. I have searched the forum, and the Internet, and cant find specific instructions, or a guide that I can follow with any success.
I stupidly deleted system files from my Kindle, but now I have purchased a fastboot cable, and I'am able to get it into fastboot mode.
I have correctly installed the ADB Drivers, and the device is now recognized by my Windows 7 Device Manager. It shows 'Android ADB Interface'.
I would guess that I need to flash the entire Kindle, but I'm unsure of how to do this, as I cannot seem to access the device at all. It currently loops when booting, giving me no time to see it as external storage via My Computer.
Please would someone more versed in this, guide me specifically through how to get myself back up and running again? I would be forever greatful.
I have SDK and JDK installed, but do not have the knowledge I need to learn how to use them properly.
Thanks so much in advance.
Click to expand...
Click to collapse
what is the fastboot cable? where can I get it? can a normal usb cable do the job?
goodayoo said:
what is the fastboot cable? where can I get it? can a normal usb cable do the job?
Click to expand...
Click to collapse
You definitely need the fastboot cable to push files through the ADB Interface dude. You can buy one for dirt cheap on EBay. Then all you do is simply plug it into your PC and Kindle, and it should put the Kindle straight into Fastboot mode.
Then you need to install the ADB Drivers for the Kindle.
From there, I'm stuck I'm afraid.
urbainmenace said:
You definitely need the fastboot cable to push files through the ADB Interface dude. You can buy one for dirt cheap on EBay. Then all you do is simply plug it into your PC and Kindle, and it should put the Kindle straight into Fastboot mode.
Then you need to install the ADB Drivers for the Kindle.
From there, I'm stuck I'm afraid.
Click to expand...
Click to collapse
OK，I think I'm gonna get one and give it a try. the only way to fix this brick is in the ADB Interface I'm sure. though I also don't know How to do.
I've finally figured out how to get ADB up and running, and how to start command prompt. I found this link helpful:
developer.amazon.com/public/resources/development-tools/ide-tools/tech-docs/05-setting-up-your-kindle-fire-tablet-for-testing
If anyone needs help pushing files through ADB, I recommend that link!
Do the following to detect your Kindle Fire tablet through ADB:
Open a command prompt window.
Change directory to your Android SDK platform-tools directory. - To do this, find out where SDK is installed on your PC. Copy the path.
Type cd in command prompt, then space, then paste the directory path. EG, C:\Users\Administrator\sdk\platform-tools
Hit enter, and the command line will change to read C:\Users\Administrator\sdk\platform-tools.
Run the following commands and confirm that the serial number for your Kindle Fire tablet appears in the list of devices.
adb kill-server
adb start-server
adb devices
Then follow the rest of the guide. I think all you need to to do, is push a system update through, by putting the file in the tools folder of SDK. This should make the device update, and put back any critical system files that you had previously deleted.
Now I'm just having issues with it finding the device, so I'm going to charge the Kindle for a few hours, and then try it again.
:good:
urbainmenace said:
I've finally figured out how to get ADB up and running, and how to start command prompt. I found this link helpful:
developer.amazon.com/public/resources/development-tools/ide-tools/tech-docs/05-setting-up-your-kindle-fire-tablet-for-testing
If anyone needs help pushing files through ADB, I recommend that link!
Do the following to detect your Kindle Fire tablet through ADB:
Open a command prompt window.
Change directory to your Android SDK platform-tools directory. - To do this, find out where SDK is installed on your PC. Copy the path.
Type cd in command prompt, then space, then paste the directory path. EG, C:\Users\Administrator\sdk\platform-tools
Hit enter, and the command line will change to read C:\Users\Administrator\sdk\platform-tools.
Run the following commands and confirm that the serial number for your Kindle Fire tablet appears in the list of devices.
adb kill-server
adb start-server
adb devices
Then follow the rest of the guide. I think all you need to to do, is push a system update through, by putting the file in the tools folder of SDK. This should make the device update, and put back any critical system files that you had previously deleted.
Now I'm just having issues with it finding the device, so I'm going to charge the Kindle for a few hours, and then try it again.
:good:
Click to expand...
Click to collapse
good to hear that! I hope you can tell me how to push the system folder into the fire hdx via ADB ,I got a thor-amazon-os-13.3.1.0.zip file.
goodayoo said:
good to hear that! I hope you can tell me how to push the system folder into the fire hdx via ADB ,I got a thor-amazon-os-13.3.1.0.zip file.
Click to expand...
Click to collapse
In command prompt, there is an ADB push command, so I think all you do is type that, then the path of the file.
To list all the commands you can use, change command prompt to your platform-tools folder within SDK, type ADB in command prompt, and it will give you all the options.
You'll need to unzip the update file first I think.
:good:
bootlooped, adb runs some commands
urbainmenace said:
In command prompt, there is an ADB push command, so I think all you do is type that, then the path of the file.
To list all the commands you can use, change command prompt to your platform-tools folder within SDK, type ADB in command prompt, and it will give you all the options.
You'll need to unzip the update file first I think.
:good:
Click to expand...
Click to collapse
Working with the HDX 8.9.
I think I have deleted some of the system files also. I was reloading a safestrap backup and rebooted but the backup had failed to complete. I don't know what may be missing from the system files and would like to push the system files onto the device.
Right now I get a gray kindlefire screen for about 90 seconds, during which I have adb access, then it goes to the color kindlefire screen and asks if I want to Restore to Factory Defaults or reboot. I finally subjected it to the Restore to Factory Defaults, but that just wiped the cache and data partitions, I don't see where it did anything to the system files. It did not change my adb access.
In adb I can push files to some locations but others say: failed to copy ....: Read-only file system.
I cannot run shell commands
# adb shell
soinfo_link_image(linker.cpp:1617): could not load library "/vendor/lib/libNimsWrap.so" needed by "/system/bin/sh"; caused by load_library(linker.cpp:745): library "/vendor/lib/libNimsWrap.so" not foundCANNOT LINK EXECUTABLE
I was working in Windows 8.1 but have switched to Suse Linux but the results are the same so far.
I have the stock system files but I am not sure how to push them to the device, if it can be done, while the device is trying to reboot.
fastboot
I can put the HDX in Fastboot mode with the adb command. But when I try to pass commands to the HDX I get:
< waiting for device >
and I have to Ctrl-c to stop the process.
Do the fastboot commands only work if you have a fastboot cable???
Since you guys are using adb checkout these threads:
http://forum.xda-developers.com/showthread.php?t=2530623 Factory Reset
http://forum.xda-developers.com/showthread.php?t=2636817 [Video Tutorial] GAPPS + Amazon from Cpasjuste
http://forum.xda-developers.com/showthread.php?t=2638241 How to un-boot-loop (another way)
http://forum.xda-developers.com/showthread.php?t=2598577 [TUT/FIX] Fix the Boot Loop on Kindle Fire HDX 7"
This guy may also be able to help, forum member: GSLEON3 Post #16
http://forum.xda-developers.com/showthread.php?t=2580989&page=2
I followed the directions here
http://www.htcdev.com/bootloader
on 2 different computer. Installed the 3 links
Google Android SDK zip:
Java Runtime Environment:
HTC Sync (Windows Only):
Made sure fast boot off.
Tried with/without USB debugging on (even tho there is no directions for that)
Typed in Command Prompt: fastboot oem get_identifier_token.
I get same message "fastboot is not recognized as an internal or external command, program or batch file"
Tried to do the rumrunner thing as well but it says i need to get past bootloader 1st.
arrrggg
What do I do I have tried googling with no help.
All my phones in the past i could find rather easy "how to" instructions but not this phone.
crap
Put your device to fastboot mode ( switch off the device volume down and power together)
Else
Usb debugging on and type the command in cmd (adb reboot bootloader)
Sent from my SM-N7505 using XDA Free mobile app
saeroner said:
I followed the directions here
http://www.htcdev.com/bootloader
on 2 different computer. Installed the 3 links
Google Android SDK zip:
Java Runtime Environment:
HTC Sync (Windows Only):
Made sure fast boot off.
Tried with/without USB debugging on (even tho there is no directions for that)
Typed in Command Prompt: fastboot oem get_identifier_token.
I get same message "fastboot is not recognized as an internal or external command, program or batch file"
Tried to do the rumrunner thing as well but it says i need to get past bootloader 1st.
arrrggg
What do I do I have tried googling with no help.
All my phones in the past i could find rather easy "how to" instructions but not this phone.
crap
Click to expand...
Click to collapse
You aren't running the cmd from th correct folder. Browse to the folder where fastboot is. Hold shift key and right click. Select open cmd prompt here. Then run your commands.
dottat said:
You aren't running the cmd from th correct folder. Browse to the folder where fastboot is. Hold shift key and right click. Select open cmd prompt here. Then run your commands.
Click to expand...
Click to collapse
Ok i did that but get this message
"program can't start because AdbWinApi.dll is missing from your computer. Try re-installing"
I reinstalled/downloaded "Google Android SDK zip:"twiceusing to different extraction programs. I placed the folder in the same android folder as the fastboot.
still stuck. any help?
thanks
saeroner said:
Ok i did that but get this message
"program can't start because AdbWinApi.dll is missing from your computer. Try re-installing"
I reinstalled/downloaded "Google Android SDK zip:"twiceusing to different extraction programs. I placed the folder in the same android folder as the fastboot.
still stuck. any help?
thanks
Click to expand...
Click to collapse
Download this. Extract it. Run your command prompt and commands here.
https://www.androidfilehost.com/?fid=23501681358559711
^ Thanks that worked!
saeroner said:
^ Thanks that worked!
Click to expand...
Click to collapse
You are welcome ☺