Related
I bought my own nook color on saturday, there doesn't appear to be a factory image that can be restored. My new nook color came with version 1.01 preinstalled. Before turning it on the first time I put in nookie froyo and did a dd of all 8 of the stock partitions. Below is the zipped up .img files of mmcblk0p1/mmcblk0p5 (boot/system) from a stock untouched 1.01 nook color. I am also including the factory.zip. This should be enough to restore a bricked nook color with a corrupted boot or system partition. Many people have been able to restore to stock by just using the boot.img because after 8 failed boots it will do a factory reset.
To make this work you must have ADB working first. You may be able to get this to work on ADB Wireless, but I don't recommend it. For instructions on getting adb to work with the nook color go here:
http://nookdevs.com/NookColor_USB_ADB
To use these files unzip them to the sdcard portion of a nookie froyo sdcard, or just about any other rom that runs from the sdcard and run the following commands in an adb shell:
dd if=/sdcard/boot.img of=/dev/block/mmcblk0p1
dd if=/sdcard/system.img of=/dev/block/mmcblk0p5
Boot
System
factory.zip
Thanks, you're a life saver!
samuelhalff said:
Thanks, you're a life saver!
Click to expand...
Click to collapse
Did it fix you samuelhalff?
Yes. But I only used boot.img. Then restored to stock with 8 failed boots. Dd'ing system will also work.
If it dosen't boot, do a factory reset with power+n.
Sent from my HTC Desire using XDA App
So if I put the factory.zip on /dev/mmcblk0p3 and replace the current one, when we do the 8 bad boot trigger we would get 1.0.1 flashed instead of 1.0.0 right?
Yes. And I would also do a power+n reset at the end, to avoid any problems.
Sent from my HTC Desire using XDA App
shad0wf0x,
I am having the same problem with my NC not booting after a failed attempt at
re-rooting. I will tell you in advance that I am VERY tech-phobic and don't comprehend all this command-line stuff well at all.
Given your original post above, could you please explain in layman's terms EXACTLY what steps to take to restore my NC to like-new? And hopefully it can be done with just simply putting some files on a micro SD and that's it. Please let me know from start to finish how I do this. Appreciate your help in advance.
vigeh4
P.S. I know I had no business doing this, but I screwed my unit up anyway. I already tried the 8-step interrupt thing before re-rooting but with no success.
vigeh4,
First download the first 2 files, system and boot, and then unzip them. Then you need to copy those 2 files (system.img and boot.img) to the sdcard, either while booted up in nookie froyo or by putting the sdcard in your computer. Then you must have adb working on your computer. open a command prompt or terminal(windows or mac/linux) and go to the location where your working adb is and copy and paste those commands into the window to run them.
Code:
dd if=/sdcard/boot.img of=/dev/block/mmcblk0p1
dd if=/sdcard/system.img of=/dev/block/mmcblk0p5
shad0wf0x said:
vigeh4,
First download the first 2 files, system and boot, and then unzip them. Then you need to copy those 2 files (system.img and boot.img) to the sdcard, either while booted up in nookie froyo or by putting the sdcard in your computer. Then you must have adb working on your computer. open a command prompt or terminal(windows or mac/linux) and go to the location where your working adb is and copy and paste those commands into the window to run them.
Code:
dd if=/sdcard/boot.img of=/dev/block/mmcblk0p1
dd if=/sdcard/system.img of=/dev/block/mmcblk0p5
Click to expand...
Click to collapse
Sorry, I am WAY confused about how to do this. This adb crap is over my head.
Maybe I just have a $250 paperweight at this point. If I mail you my NC, would you reset to "factory" for a small fee?
Thanks.
OMFG, thank you very much for these files and instructions.
I really thought I bricked it to the point of no return. I initially screwed it up when I installed Clockwork and wouldn't boot past "N", then after tinkering around some more, it wouldn't even turn on ... lol.
@vigeh
First you need to unzip those files you just downloaded. Second, you need to copy the "boot.img" and "system.img" (not the *.zip) to the "/SDCARD" folder on your SDCARD. I had to use WIFI FILE Explorer in Nookie Froyo cuz I messed up my nook so bad, i couldn't copy these files by turning on the USB Storage through the regular method. It took me days to figure this out cuz i'm kinda slow.
I hope you installed the Android-SDK on your computer already. If so, then go to the folder named "\platform-tools" on your PC - this is where ADB.EXE is located. Connect your nook and type "ADB DEVICES" just to make sure your nook is connected to the computer. It'll show up and tell you it is or not. If it is connected then do the following:
1. Type "ADB SHELL" then you'll see a "#" symbol after you hit enter.
2. Type "dd if=/sdcard/boot.img of=/dev/block/mmcblk0p1" just the way it is written by the original poster (minus the "" marks)
at this point, it usually wont say anything. Just wait a few minutes and something will pop up. In my case, it says:
"477033984 bytes <454.9MB> copied, 138.757660 seconds, 3.3MB/s"
"#"
3. Type the second command next to the "#" sign "dd if=/sdcard/system.img of=/dev/block/mmcblk0p5"
wait another few minutes til the next confirmation pops up.
4. turn off nook, remove SD card
5. Hold the N button and the Power button at the same time and it'll ask you to reset the nook to factory settings.
I hope this helps you ....
well im a tard... i did this without reading that YOU CANNOT HAVE GOOGLE APPS!!!! so anyway Im trying to get back to a stock image, but i cant figure out how to copy 700 med +/- of images to 134 meg f free space. someone un-tard me plz . thanks
I have ClockworkMod Recovery installed, and if I put the factory.zip you provided on my sd card and use the option 'install zip from sdcard' will that in fact install factory settings on the nook?
I tried to do the 8 failed boots, but cannot get it to work with this installed.
shad0wf0x said:
vigeh4,
First download the first 2 files, system and boot, and then unzip them. Then you need to copy those 2 files (system.img and boot.img) to the sdcard, either while booted up in nookie froyo or by putting the sdcard in your computer. Then you must have adb working on your computer. open a command prompt or terminal(windows or mac/linux) and go to the location where your working adb is and copy and paste those commands into the window to run them.
Code:
dd if=/sdcard/boot.img of=/dev/block/mmcblk0p1
dd if=/sdcard/system.img of=/dev/block/mmcblk0p5
Click to expand...
Click to collapse
How do you get to your "working adb?" I'm probably even more ignorant on this SDK stuff that vigeh4. I have SDK installed though.
How to get adb working is found here:
http://nookdevs.com/NookColor_USB_ADB
gconol said:
@vigeh
First you need to unzip those files you just downloaded. Second, you need to copy the "boot.img" and "system.img" (not the *.zip) to the "/SDCARD" folder on your SDCARD. I had to use WIFI FILE Explorer in Nookie Froyo cuz I messed up my nook so bad, i couldn't copy these files by turning on the USB Storage through the regular method. It took me days to figure this out cuz i'm kinda slow.
I hope you installed the Android-SDK on your computer already. If so, then go to the folder named "\platform-tools" on your PC - this is where ADB.EXE is located. Connect your nook and type "ADB DEVICES" just to make sure your nook is connected to the computer. It'll show up and tell you it is or not. If it is connected then do the following:
1. Type "ADB SHELL" then you'll see a "#" symbol after you hit enter.
2. Type "dd if=/sdcard/boot.img of=/dev/block/mmcblk0p1" just the way it is written by the original poster (minus the "" marks)
at this point, it usually wont say anything. Just wait a few minutes and something will pop up. In my case, it says:
"477033984 bytes <454.9MB> copied, 138.757660 seconds, 3.3MB/s"
"#"
3. Type the second command next to the "#" sign "dd if=/sdcard/system.img of=/dev/block/mmcblk0p5"
wait another few minutes til the next confirmation pops up.
4. turn off nook, remove SD card
5. Hold the N button and the Power button at the same time and it'll ask you to reset the nook to factory settings.
I hope this helps you ....
Click to expand...
Click to collapse
Thanks to Shadowf0x for getting ABD to work
I have a question though, if I dont have the file "SDCARD" in my SD card then can I just make a new file and name it SDCARD, and put both of the .img's into it?
Sir a teema said:
I have ClockworkMod Recovery installed, and if I put the factory.zip you provided on my sd card and use the option 'install zip from sdcard' will that in fact install factory settings on the nook?
I tried to do the 8 failed boots, but cannot get it to work with this installed.
Click to expand...
Click to collapse
I'm not sure if that will work, I guess it's worth a try, however if you replace the existing factory.zip and do a factory reset you will restore back to 1.01 instead of 1.0 if you don't already have a nc that has 1.01 on it. I saw another thread about trying to use the factory.zip with cwm, but I didn't see anyone coming back and say it worked. How to flash back to stock is found here:
http://nookdevs.com/Flash_back_to_clean_stock_ROM
mmaner said:
well im a tard... i did this without reading that YOU CANNOT HAVE GOOGLE APPS!!!! so anyway Im trying to get back to a stock image, but i cant figure out how to copy 700 med +/- of images to 134 meg f free space. someone un-tard me plz . thanks
Click to expand...
Click to collapse
The nookie froyo sdcard partition for me was 900+m, and I've heard that all you need to do for this to work is to flash the boot.img.
Ign3nt said:
Thanks to Shadowf0x for getting ABD to work
I have a question though, if I dont have the file "SDCARD" in my SD card then can I just make a new file and name it SDCARD, and put both of the .img's into it?
Click to expand...
Click to collapse
You could try to mount the media partition in nookie froyo and put them there.
The partition is /dev/block/mmcblk0p8 and type is vfat.
shad0wf0x said:
The nookie froyo sdcard partition for me was 900+m, and I've heard that all you need to do for this to work is to flash the boot.img.
Click to expand...
Click to collapse
Ill try it tonight. thanks
Hi everyone,
I tried using a script which automated the install for the the custom recovery, but I started to get messages that it ran out of disk space (I can't link to the file due to my noob status). I probably should have come here first before using that script, but such as life..
I have no important data on the phone, if I lose it all that's ok.
It rebooted and my p500 waits with the following
"Fastboot mode started"
"udc_start()"
It also gives some info when USB is connected ie.
"- suspend -"
"- reset -"
Do I have a paperweight?
thanks and sorry for the newb post ..
edit: so I found this : http://forum.xda-developers.com/showthread.php?t=1003790 and
http://forum.xda-developers.com/showthread.php?t=875881
and have gotten it to the yellow emergency mode, not sure how to flash it from here though.
edit2: dling the stock firmware from http://forum.xda-developers.com/showthread.php?t=1073827
edit3: there's this as well.. http://forum.xda-developers.com/showthread.php?t=1088046 If I try this method, will it screw up again from too little free disk space?
I'm to drunk to guide our give you the link to fix it but I will tell you, you can fix it just hold on we will help you ; ) and we don't by the time I wake up I will help you its ok ))
Sent from my LG-P500 using XDA Premium App
dislplin01 said:
I'm to drunk to guide our give you the link to fix it but I will tell you, you can fix it just hold on we will help you ; ) and we don't by the time I wake up I will help you its ok ))
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
thank you very much, I appreciate it haha
Your phone has booted in fastboot mode. Go to development section and read a tutorial how to recover from fastboot.
Sent from my LG-P500 using XDA Premium App
setTopbox said:
thank you very much, I appreciate it haha
Click to expand...
Click to collapse
Then did u unbricked now
Mahesh
go here....
http://forum.xda-developers.com/showthread.php?t=1088046
or here
http://forum.xda-developers.com/showthread.php?p=13813493
How to install Android SDK /ADB
http://lgoptimusonep500.blogspot.com/2011/01/how-to-install-android-sdk-adb.html
dislplin01 said:
I'm to drunk to guide our give you the link to fix it but I will tell you, you can fix it just hold on we will help you ; ) and we don't by the time I wake up I will help you its ok ))
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
Most honest post I've seen on the entire forum.
Sent from my Kyocera Echo.
mvgadagi said:
Then did u unbricked now
Mahesh
Click to expand...
Click to collapse
I got the phone working again - thanks! I guess it's not a great idea to install the custom recovery
with low disk space?
setTopbox said:
I got the phone working again - thanks! I guess it's not a great idea to install the custom recovery
with low disk space?
Click to expand...
Click to collapse
Hmmm. Well, should not matter? /recovery uses a separate partition. Perhaps you flashed a corrupt (incomplete) image?
well if u ever wish to install recovery just download rom manger from market (latest) and install recovery from rom manger option make sure u hav eusb debugging enabled. it works easy
shhbz said:
well if u ever wish to install recovery just download rom manger from market (latest) and install recovery from rom manger option make sure u hav eusb debugging enabled. it works easy
Click to expand...
Click to collapse
Erm... reading all the posts about fastboot after using ROM Manager for this, I guess I would rather stick with the custom script using flash_image.
doktornotor said:
Hmmm. Well, should not matter? /recovery uses a separate partition. Perhaps you flashed a corrupt (incomplete) image?
Click to expand...
Click to collapse
hmm, I'm not sure (when I dl'd the file I did compare the hash as per instructions). I used the following instructions:
manast.com/2011/05/07/how-to-install-custom-recovery-on-lg-optimus-one-p500
I then went into a terminal emulator, and ran "sh /sdcard/rf.sh". At that point the output of the script started to say "disk full" (and then it reboot into the fastboot prompt).
setTopbox said:
I then went into a terminal emulator, and ran "sh /sdcard/rf.sh". At that point the output of the script started to say "disk full" (and then it reboot into the fastboot prompt).
Click to expand...
Click to collapse
No idea about that script. Using flash_image and never had any issue with "disk full", frankly the message does not make sense. All you need is to copy the recovery image to SD and run as root:
Code:
# flash_image recovery /sdcard/recovery.img
Done.
doktornotor said:
No idea about that script. Using flash_image and never had any issue with "disk full", frankly the message does not make sense. All you need is to copy the recovery image to SD and run as root:
Code:
# flash_image recovery /sdcard/recovery.img
Done.
Click to expand...
Click to collapse
I'm getting permission denied when trying to use flash_image. Gingerbreak says the device is rooted, and the terminal does ask for superuser permission when i open it (su works in the terminal). I also tried chmod 755 flash_image but that didn't work either.
the permissions for flash_image are r-xr-x any thoughts ?
edit: apparently the sdcard is mounted with -noexecute ? So I tried copying flash_image to / but it's read only. Is there somewhere where I can execute this?
This rf.sh script seems most notorious, I too went into fastboot after that. Doktornotor's method worked (in fact I think he/she was the one who bailed me out back then as well).
If you got into fastboot, most probably you have a rooted phone.
To use flash_image you need to get the flash_image.sh on the root of your sd card. Search the forum for Amon-Ra custom recovery, and you shall find this file in that thread (it is required for Amon ra setup). Log in to your adb console, and use fastboot to push the new image in the recovery partition.
Unless your recovery.img or flash_image.sh is corrupted, it will work for sure.
Keep in mind, fastboot is a very powerfull tool, if you can access it, you're safe.
Cheers,
Alex
did you get out??
just flash stock firmware with kdz worked for me bro
Buddy,
You do not need to flash anything with KDZ. The ROM is fine nothing happened to it. All your issue is with the recovery being flashed wrongly for some reason.
I had the same issue just yesterday and I managed to flash the recovery through fastboot.
What you need to do is:
1. Install android SDK from Google.
2. Connect the phone while it is on fastboot.
3. If your windows does not find the fastboot drivers online, use the drivers in this link:
http://www.megaupload.com/?d=39ZR16W1
4. extract the .zip file that you copied to your SD. The one that contains the recovery.
5. Copy the recover.img (or whatever the name of the .img file in the .zip file) to the folder inside the android sdk where fastboot.exe is located (I think its the tools folder)
6. Copy the adbwinapi.dll file from the android SDK\platform-tools\ to the folder containing fastboot.
7. issue the command (and replace recovery.img with the .img file name you have):
fastboot flash recovery recovery.img
fastboot reboot
Dr.Alani said:
Buddy,
You do not need to flash anything with KDZ. The ROM is fine nothing happened to it. All your issue is with the recovery being flashed wrongly for some reason.
I had the same issue just yesterday and I managed to flash the recovery through fastboot.
What you need to do is:
1. Install android SDK from Google.
2. Connect the phone while it is on fastboot.
3. If your windows does not find the fastboot drivers online, use the drivers in this link:
http://www.megaupload.com/?d=39ZR16W1
4. extract the .zip file that you copied to your SD. The one that contains the recovery.
5. Copy the recover.img (or whatever the name of the .img file in the .zip file) to the folder inside the android sdk where fastboot.exe is located (I think its the tools folder)
6. Copy the adbwinapi.dll file from the android SDK\platform-tools\ to the folder containing fastboot.
7. issue the command (and replace recovery.img with the .img file name you have):
fastboot flash recovery recovery.img
fastboot reboot
Click to expand...
Click to collapse
I appreciate the information. When I'm in adb, su won't allow me to gain root access on the phone. The phone itself is rooted using gingerbreak though.
setTopbox said:
I appreciate the information. When I'm in adb, su won't allow me to gain root access on the phone. The phone itself is rooted using gingerbreak though.
Click to expand...
Click to collapse
I do not see how you need to use adb.
Sent from my LG-P500 using XDA App
Here is a complete guide for anyone interested in rooting the HTC Droid DNA. The insecure boot image, TWRP recovery, CWM recovery and SuperSU files used in this guide are not my own developments, and their developers have been credited in the end of this post.
I am only writing this as a newbie-friendly guide for everyone, and am providing my own SuperSU, su and busybox installer zip file that includes everything you need for full root.
Unlock the bootloader of your device by visiting the HTC bootloader unlock page. Warning: This will wipe your data.
UPDATE: Thanks to Verizon, the official bootloader unlocking method mentioned above no longer works. Please refer to this method for unlocking the bootloader.
Download ClockworkMod or TWRP recovery for the device and rename it to recovery.img (or keep the existing name and change recovery.img in the command below to that name).
Download the SuperSU and busybox package and put it on your SD card.
Put your phone into bootloader mode and connect it to your PC via USB.
On your computer, make sure you are in the folder where you downloaded the recovery file and use this command to flash the recovery:
Code:
fastboot flash recovery recovery.img
Finally, reboot your device into recovery, flash the SuperSU and busybox package and reboot your device.
You should now have root access.
Credits:
jcase for unlocking the bootloader after Verizon decided to lock it.
dsb9938 for sharing the CWM port and correcting me regarding my previously posted and now removed second method involving his insecure boot image
Dees_Troy for TWRP recovery.
utkanos for CWM port.
Chainfire for developing SuperSU
I have tried to credit everyone involved but if I have missed out on anyone, please do let me know.
thanks for the guide!
just one question though. when you say "Download the SuperSU and busybox package and put it on your SD card.", what do you mean exactly by SD card? doesn't the DNA not have a SD card? sorry if this is a dumb question. i've never rooted a phone before :/
hotmonkas said:
thanks for the guide!
just one question though. when you say "Download the SuperSU and busybox package and put it on your SD card.", what do you mean exactly by SD card? doesn't the DNA not have a SD card? sorry if this is a dumb question. i've never rooted a phone before :/
Click to expand...
Click to collapse
Internal storage would be another name for the SD card.
touretts69 said:
Internal storage would be another name for the SD card.
Click to expand...
Click to collapse
ah okay, thank you
which device do u use on the htc page?
nyjw said:
which device do u use on the htc page?
Click to expand...
Click to collapse
"Other devices", or similar.
Sent from my ADR6425LVW using xda premium
Awesomeness.
The fact that this phone is rooted a week before its even out... simply awesome. I love XDA!
So excited for this phone.
HQRaja said:
Code:
adb shell mount -o remount,rw /system
[LIST=1]
[*] adb push su /system/bin/
adb push Superuser.apk /system/app/
adb push busybox /system/xbin/
adb shell
chmod 06755 /system/bin/su
chmod 0644 /system/app/Superuser.apk
chmod 04755 /system/xbin/busybox
cd /system/xbin
busybox --install /system/xbin/
exit
exit
[*]Reboot your device.
[/LIST]
Click to expand...
Click to collapse
This will not work. You cannot write to /system except in recovery.
This is why I did not publish my initial root method. Using a package and flashing in recovery is the only way to get files on /system without some really gnarly stuff.
D
.
dsb9938 said:
This will not work. You cannot write to /system except in recovery.
This is why I did not publish my initial root method. Using a package and flashing in recovery is the only way to get files on /system without some really gnarly stuff.
D
.
Click to expand...
Click to collapse
Thanks for your response. =)
Based on my understanding (and my experience with Nexus devices), once you boot using an insecure boot image, you have full root access in ADB since it is running adbd as root on the device. You can then successfully write to the /system partition and the changes persist after reboot. While I can confirm that the above will work on any Nexus device as well as any similar device with an unlocked bootloader and fastboot access, I am not 100% sure if that's how it works on HTC devices that have the S-ON flag. Are you referring to S-ON devices in particular here?
HQRaja said:
Thanks for your response. =)
Based on my understanding (and my experience with Nexus devices), once you boot using an insecure boot image, you have full root access in ADB since it is running adbd as root on the device. You can then successfully write to the /system partition and the changes persist after reboot. While I can confirm that the above will work on any Nexus device as well as any similar device with an unlocked bootloader and fastboot access, I am not 100% sure if that's how it works on HTC devices that have the S-ON flag. Are you referring to S-ON devices in particular here?
Click to expand...
Click to collapse
Normally it does work that way. And I was very disappointed that it did not on this phone, as I made the kernel just for that reason.
I think there was an error in the coding where it tells unlock which partitions to remove write protection from. That, or they just wanna make our lives hard for some reason.
Either way, you cannot write to /system while the phone is booted normally without S-Off. Even as root.
D
.
dsb9938 said:
Normally it does work that way. And I was very disappointed that it did not on this phone, as I made the kernel just for that reason.
I think there was an error in the coding where it tells unlock which partitions to remove write protection from. That, or they just wanna make our lives hard for some reason.
Either way, you cannot write to /system while the phone is booted normally without S-Off. Even as root.
D
.
Click to expand...
Click to collapse
Ah I see. Thanks for pointing that out. I'll remove the second method from my guide, since including that would be pointless if that's the case as you can now confirm.
So does this method work? Or not???Im confused with the last few posts. Thanks
suzook said:
So does this method work? Or not???Im confused with the last few posts. Thanks
Click to expand...
Click to collapse
Edited post is fine. He removed the part I was talking about.
D
.
What I want to know most if anyone knows..will the DNA through verizon be unlockable....I'm actually using the RAZR Maxx hd through verizon and Motorola has restricted unlocking the bootloader because of verizon
Sent from my DROID RAZR HD using xda app-developers app
Irish65 said:
What I want to know most if anyone knows..will the DNA through verizon be unlockable....I'm actually using the RAZR Maxx hd through verizon and Motorola has restricted unlocking the bootloader because of verizon
Sent from my DROID RAZR HD using xda app-developers app
Click to expand...
Click to collapse
You can't do any of this stuff without unlocking.
As of right now, it is working.
D
.
How do you do the command in the folder were u downloaded to like the instructions say?
idle0095 said:
How do you do the command in the folder were u downloaded to like the instructions say?
Click to expand...
Click to collapse
Please be more specific.
D
.
idle0095 said:
How do you do the command in the folder were u downloaded to like the instructions say?
Click to expand...
Click to collapse
In command prompt, use the "cd" command. The easiest way to do this is to make a folder at the root of your hard drive (C:\) and place all files you need to flash in here e.g. "C:\android\" Then in command prompt, type in "cd .." and press enter until it displays "C:\". Then type (if you use the same name as the example) "cd android" and it will enter the folder "C:\android\" where you placed the files. Now you can continue with the rest of the guide.
CastleBravo said:
In command prompt, use the "cd" command. The easiest way to do this is to make a folder at the root of your hard drive (C:\) and place all files you need to flash in here e.g. "C:\android\" Then in command prompt, type in "cd .." and press enter until it displays "C:\". Then type (if you use the same name as the example) "cd android" and it will enter the folder "C:\android\" where you placed the files. Now you can continue with the rest of the guide.
Click to expand...
Click to collapse
Or if on Windows, simply: Do the following in folder where files are located.
Shift+Right-Click > Open Command Window Here
I've never had an HTC device before but does using the HTC bootloader unlock is that making it s-off? Also I don't see the DROID dna on the list
Sent from my SCH-I535 using xda premium
So I used the S3 toolkit by mskip and it's cool it's so fast lovely. One problem now I can't delete anything. I went to look for the answer.
Quote: Originally Posted by pat357
Mark,
Maybe you missed my initial post concerning a possible bug in the Toolkit v7.0.
http://forum.xda-developers.com/show...postcount=1307
After making a backup from my internal SD using the "backup SD" option in the Toolkit, it pulled all my files to my PC and everything went well.
However after restoring my SD using the "restore internal SD", my permissions appeared to be screwed up.
I could not delete/modify any file anymore on my internal SD. I got a lot of FC from apps.
What are the correct permissions and owner from the internal SD (=/data/media) ??
Did the toolkit change any permissions/ownership ? I thought I saw a " chmod 775 or 755" flashing on the terminal when restoring my SD (about the last command at the end, IIRC).
To get it working again, I did a :
Code:
su
chmod -R 777 /data/media/*
The owner from each file is now "root" (0), but my permissions are complete open (777)
Somehow this doesn't seem correct.... but I don't know.
So, again : what are the correct permissions and owner from the internal SD (=/data/media) ??
Click to expand...
Click to collapse
adb shell chmod -R 775 /data/media
adb shell chown media_rw.media_rw /data/media
Mark.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
COOL! Now how do I do that?
I honestly don't know where the first place to look would be
google how to use adb
Nope
Also
Re: [SAMSUNG GALAXY S3 UNIFIED TOOLKIT V7.0] Drivers, Backup, Root, Recovery + MORE [
Quote: Originally Posted by mskip
If you have root then try installing a file manager such as Root Explorer from the Play Store which should let you delete any files you need to.
Mark.
Click to expand...
Click to collapse
Thanks I finally got it. But I an not sure how. I did try this but it was like my chip was blocked from formatting or erasing anything then after hours of trying to erase it and factory reset and wipe it magically fixed.
Domination V3 Powered!
Click to expand...
Click to collapse
I have root explorer and it's still not deleting. And mind didn't get fixed magically omg what do I do?!?!
I tried the adb thing also.
Someone anyone know how to fix this omg
okay there's a file permission part of thie toolkit but I'm probably gonna destroy my phone if I do something here
Mother of god i flashed the stock rom and it still did nothing why jesus
vapidteens said:
Mother of god i flashed the stock rom and it still did nothing why jesus
Click to expand...
Click to collapse
READ THE RULES stop bumping .
jje
I have about 30 of these phones and people have been asking me how I get SuperSU on them:
https://youtu.be/qkik4q5ERaU
NitroKoS said:
I have about 30 of these phones and people have been asking me how I get SuperSU on them:
https://youtu.be/qkik4q5ERaU
Click to expand...
Click to collapse
In the video, you said Kingroot 4.5
There is new:
Kingroot V5.0.4 should I get it instead?
Handsome Jack said:
In the video, you said Kingroot 4.5
There is new:
Kingroot V5.0.4 should I get it instead?
Click to expand...
Click to collapse
Successfully rooted the Alcatel Streak with KingRoot. But my cell phone won't boot after I applied the KingRoot/SuperSu replacement.
Here is thread on requesting ROM to recover from the issue. Obviously another person had same issue as I did:
https://forum.xda-developers.com/android/help/requesting-alcatel-4060-o-cricket-stock-t3578896
I have uploaded all the partition dd image at mediafire.com excepect /system witch is big file and i have low bandwidth
Note, the recovery image is compressed zip us unzip before dd back
kdm6389 said:
I have uploaded all the partition dd image at mediafire excepect /system witch is big file and i have low bandwidth
Note, the recovery image is compressed zip us unzip before dd back
Click to expand...
Click to collapse
I see many dd files with one particular zip file in mediafire. How can I use these files to flash my Alcatel Streak ROM? I have never done this before and I am newbie here.
Thanks,
jxzz said:
I see many dd files with one particular zip file in mediafire. How can I use these files to flash my Alcatel Streak ROM? I have never done this before and I am newbie here.
Thanks,
Click to expand...
Click to collapse
You need "adb"
use following cmd to replace using,
adb shell
su
dd if=/sdcard/backup/pationno.img of=/the/pation/where/you/want/to/restore
beware!
dd is very lethal in wrong hand, I recommend not use until you are knowing what are you doing, we dont have any TWRP so to save your device.
kdm6389 said:
You need "adb"
use following cmd to replace using,
adb shell
su
dd if=/sdcard/backup/pationno.img of=/the/pation/where/you/want/to/restore
beware!
dd is very lethal in wrong hand, I recommend not use until you are knowing what are you doing, we dont have any TWRP so to save your device.
Click to expand...
Click to collapse
I am quite comfortable handling linux command line shells. However, since my Alcatel Streak phone is stuck at boot, not sure how I can get the adb shell?
After several rounds of factory reset, cache reset, no mater what, the phone simply won't boot and it is stuck with "google " or "android" welcome picture.
I noticed a a guideline of using cygwin in windows PC to run dd for backing up the phone partition image. Is it possible that I copy all your dd files into a cygwin in window 10 PC, then use USB cable to move the files into the phone or flash the phone?
jxzz said:
I am quite comfortable handling linux command line shells. However, since my Alcatel Streak phone is stuck at boot, not sure how I can get the adb shell?
After several rounds of factory reset, cache reset, no mater what, the phone simply won't boot and it is stuck with "google " or "android" welcome picture.
I noticed a a guideline of using cygwin in windows PC to run dd for backing up the phone partition image. Is it possible that I copy all your dd files into a cygwin in window 10 PC, then use USB cable to move the files into the phone or flash the phone?
Click to expand...
Click to collapse
nothing will work unless u have /system image, or working ROM.zip,
Since you have corrupted /system, and your model is different then mine is pop445
i did not uploaded /system bc its wqy more size then recovery
kdm6389 said:
nothing will work unless u have /system image, or working ROM.zip,
Since you have corrupted /system, and your model is different then mine is pop445
i did not uploaded /system bc its wqy more size then recovery
Click to expand...
Click to collapse
Thanks for the information. I searched the web and found many stock ROM for download for many Alcatel models except this model.
Alcatel Streak (model 40600) is dedicated for Cricket and it appears that neither Cricket nor Alcatel releases the ROM for this model.
jxzz said:
Thanks for the information. I searched the web and found many stock ROM for download for many Alcatel models except this model.
Alcatel Streak (model 40600) is dedicated for Cricket and it appears that neither Cricket nor Alcatel releases the ROM for this model.
Click to expand...
Click to collapse
share the stock ROM
I have figured out a way to root easier, I have flashed twrp (with some graphical issues... Working on it) flashed Xposed framework on it, and got native tethering working.
This thread is obsolete now,
for rooting read https://forum.xda-developers.com/android/general/super-guide-alcatel-one-touch-4060a-t3621525
Latest Stock ROM we have | https://forum.xda-developers.com/showpost.php?p=74529924&postcount=205