Related
anyone have a ps3 controller and can try this out?
http://www.androidpolice.com/2011/0...droid-device-using-a-playstation3-controller/
I ran the tester and says it should work. if this does i am soo getting a controller tonight lol
Wouldnt it be better to just read something interesting?
I've got the windows program running but get an error: driver could not be installed. I'll try linux.
5thElement said:
Wouldnt it be better to just read something interesting?
Click to expand...
Click to collapse
What is NOT interesting about it?
I would love to use a sixaxis (or any other controller) for n64 emulators, snes emulators, psx emulators and so on. using the touchscreen as controller is ruining the experience and potential of emulators.
BTW, if you dont have anything constructive or informative to write in these forums, stfu.
On topic:
I got to borrow my friends PS3 controller:
The buttons wont hold in snes emulator, like if you run forward pressing |> and the press X to jump at the same time, I'll have to repress again after the jump |> to keep running in supermario It may be the emulator that does not support "multitouch" so I'll report back tomorrow when I'll buy my own PS3 controller.
Anyone know if the XBOX 360 controller will work w/USB host adapter?
paua__ said:
What is NOT interesting about it?
I would love to use a sixaxis (or any other controller) for n64 emulators, snes emulators, psx emulators and so on. using the touchscreen as controller is ruining the experience and potential of emulators.
BTW, if you dont have anything constructive or informative to write in these forums, stfu.
On topic:
I got to borrow my friends PS3 controller:
The buttons wont hold in snes emulator, like if you run forward pressing |> and the press X to jump at the same time, I'll have to repress again after the jump |> to keep running in supermario It may be the emulator that does not support "multitouch" so I'll report back tomorrow when I'll buy my own PS3 controller.
Anyone know if the XBOX 360 controller will work w/USB host adapter?
Click to expand...
Click to collapse
No I mean wouldnt it be better to read and learn and gain more knowledge that will be helpful to your future?
I have read, learned, and gained knowledge. And I can honestly say that using a ps3 controller for emulators running on my tab is going to be ****ing awesome for my future!
Shouldn't you be working on that taskbar color?
Sent from my PG86100 using XDA App
5thElement said:
No I mean wouldnt it be better to read and learn and gain more knowledge that will be helpful to your future?
Click to expand...
Click to collapse
Aspie much? Who cares?
Alright, sent and e-mail and got a reply. A bug in the program. Updated and now can connect with PS3 controller. Everything is working smoothly, running splendidly on n64oid 2.1.
edgarpo said:
Alright, sent and e-mail and got a reply. A bug in the program. Updated and now can connect with PS3 controller. Everything is working smoothly, running splendidly on n64oid 2.1.
Click to expand...
Click to collapse
I appreciate that information
What ROM's have you tried that is working smooth?
I've tried Super Mario 64, Wave Race 64, Golden Eye and Mario Kart 64.
They all run without hickups or any lag!
Pilot Wings 64 on the other hand gives me black polygons and crackling audio noises.
Should there be a separate thread for Emulator ROM's maybe?
Hey,
I'm having trouble pairing my controller with my Tab,
I installed the Sixaxis Pair Tool and i entered the Bluetooth Mac Address of my Tab (I didn't find it in the actual app, when i pressed Start, on the Tab but i had to enter Android Settings and About.
Anyway, under Current Master it shows the Bluetooth Mac Address of my Tab, i then unplugged the controller, pressed the PS button, and pressed Start in the App on the Tab and it says Connection Initiated.... and thats it, the controller is blinking but it doesn't seem to wanna connect to the Tab
Any help would be appreciated
P.S. I followed the instructions on http://www.dancingpixelstudios.com/sixaxiscontroller/instructions.html
Fixed it with a restart of my Tab, apparently my tab wasn't asking for root until i rebooted,
Great app by the way
My controller is being recognized by the N64oid app when i have to configure the inputs. When I go to play a game though, it won't recognize the controller.
Best money spent on my TAB so far Working perfectly with Snes9x EX.
i followed everything and the app says connection established however, my controller doesn't stop blinking any thoughts? should I just assume that this app doesn't work with samsung devices at all?
epionx111 said:
i followed everything and the app says connection established however, my controller doesn't stop blinking any thoughts? should I just assume that this app doesn't work with samsung devices at all?
Click to expand...
Click to collapse
I had a problem with mine not registering input even after following the setup and my lights saying it was connected as controller 1. I deleted the sixaxis compatibility checker and then rebooted, started the connection, hit the ps button, and selected sixaxis controller as input and it worked flawlessly. If you're 100% positive you're doing everything word for word and changed the sixaxis' bluetooth address to match your tab's then try a reboot and see if it fixes it.
So the controller finally works. When you enable IME in N64oid the controller will start working. I don't know if anyone else noticed, but does the software support full analog control? I can't get Mario to stop running at full speed even thought i am pushing the stick only a little .
If you are having trouble getting the controller started do this....
Download and SixAxisPairTool on your pc.
Plug the controller into your pc with the usb cable that came with the ps3.
Hit the power button on the controller. A set of numbers will show on top with a empty box below.
On the tablet, run SixAxis Controller. There will be a bluetooth address at the bottom of the screen. Copy these numbers/letters into the sixaxispairtool on your pc.
Unplug the controller, hit start on the controller app on the tablet and hit the power button on the controller. Hit configure input settings and switch to ps3 controller.
You should be all set to go! Good Luck!
The sixaxis works great with every emulator I have tried it with so far. Are there any non-emulator apps that anyone has got working? Any android games that are not emulators? If there are some, then maybe we need to get a list going of what apps work with the sixaxis controller and which ones do not.
I am also all in favor of getting a list of what rom's work for each system.
I have tested mario kart and 007 for N64 and they both work. I have also tested nba jam tournament edition for snes and that works. I am really bummed because cruisn usa will not work in the n64 emulator. The screen is off to the left. Has anyone else tried that one? I love playing cruisn usa.
amarp84 said:
My controller is being recognized by the N64oid app when i have to configure the inputs. When I go to play a game though, it won't recognize the controller.
Click to expand...
Click to collapse
In N64oid or whichever emulator you are running, go to settings, other settings, and then tick the box for "Use input method"
I'm having the same issue as amarp84
pairing is fine, bluetooth address is fine, connection is established no worries and it says that there is a client connected, but the lights won't stop blinking and sync to a controller port
i'm on 10.1v ... anyone else got it working on the tab so i know if it's just me?
I works great on my tab 10.1.
Anyone get keys to map with N64oid? I cant get multiple joysticks, they all map as DPAD down etc so i cant use seperate joysticks
I have been searching for a while as to how I can use my wii remote with classic controller hooked up to it for FPSe. It works for PSX4Droid, until I updated to 2.3.3 GB on Droid X2. (Rooted) FPSe 0.10.54. This was great to have when PSX4Droid worked, seems it will no longer be updated. Basically I could sync up my DX2 with my wii, plug in the classic controller, then map the buttons accordingly in the emulator. But with FPSe it only allows specific controllers it seems.
Anywho, the only options I have for "Bluetooth Pad Port 1/2" are: Zeemote, IcontrolPad and BGP100. There is no option for Wii. I am also using WiimoteController App, everything is setup properly, I just cant use wii on FPSe. I even went into FPSe.ini and changed all the mapping for the wii manually. It's like they wont talk to each other. Input device is wii also (Where is asks Swype, Keyboard, Wiimote etc etc)
Hopefully you can help! Thx!
Hoppy
Hoppy96pgtbs said:
I have been searching for a while as to how I can use my wii remote with classic controller hooked up to it for FPSe. It works for PSX4Droid, until I updated to 2.3.3 GB on Droid X2. (Rooted) FPSe 0.10.54. This was great to have when PSX4Droid worked, seems it will no longer be updated. Basically I could sync up my DX2 with my wii, plug in the classic controller, then map the buttons accordingly in the emulator. But with FPSe it only allows specific controllers it seems.
Anywho, the only options I have for "Bluetooth Pad Port 1/2" are: Zeemote, IcontrolPad and BGP100. There is no option for Wii. I am also using WiimoteController App, everything is setup properly, I just cant use wii on FPSe. I even went into FPSe.ini and changed all the mapping for the wii manually. It's like they wont talk to each other. Input device is wii also (Where is asks Swype, Keyboard, Wiimote etc etc)
Hopefully you can help! Thx!
Hoppy
Click to expand...
Click to collapse
Botta bing.
https://market.android.com/details?id=com.mercury.inputmethod.wpad&feature=search_result
I use this and it works.
Not sure if it matters to you now, but there is a way to use the ps3 controller
slowz3r said:
Not sure if it matters to you now, but there is a way to use the ps3 controller
Click to expand...
Click to collapse
O RLY? Please explain.
L2_n19h7m4r3 said:
O RLY? Please explain.
Click to expand...
Click to collapse
Nm, found this...
https://market.android.com/details?...xelstudios.sixaxiscompatibilitychecker&rdot=1
Says Droid X2 should be supported. Next step...
https://market.android.com/details?...sixaxiscontroller&feature=more_from_developer
L2_n19h7m4r3 said:
Nm, found this...
https://market.android.com/details?...xelstudios.sixaxiscompatibilitychecker&rdot=1
Says Droid X2 should be supported. Next step...
https://market.android.com/details?...sixaxiscontroller&feature=more_from_developer
Click to expand...
Click to collapse
glad i could help, lemme know how it works out for you
L2_n19h7m4r3 said:
Botta bing.
https://market.android.com/details?id=com.mercury.inputmethod.wpad&feature=search_result
I use this and it works.
Click to expand...
Click to collapse
This is the one that I use, or am trying to use: https://market.android.com/details?id=com.ccpcreations.android.WiiUseAndroid&feature=related_apps
I was under the assumption that they were the same, but I'll give it a shot. What do you select under inputs and such (Bluetooth Pad Port 1, Pad Type) to get it to work? A small detailed how to would be outstanding. Been pulling my hair out over this one. Thanks for you help!
EDIT: I open FPSe, start the game (FF Tactics), enter settings then input. My only options for "Bluetooth Pad port 1" are BGP100, Zeemote and iControlPad. I have tried each of those, basically every combo of everything I think. WiiController is also active as my input. When I go into Hardware keys to assign the keys, its as if the wii controller isnt there. So I manually mapped the Wii buttons in the FPSe.ini file. Still nothing.
Going to give https://market.android.com/details?id=com.mercury.inputmethod.wpad&feature=search_result a shot in a few. Thx!
L2_n19h7m4r3 said:
Botta bing.
https://market.android.com/details?id=com.mercury.inputmethod.wpad&feature=search_result
I use this and it works.
Click to expand...
Click to collapse
Ok, I purchased this app, installed it, swiched input to this app (instead of keyboard), connected the Wiimote by pressing 1 & 2 for sync mode, verified controller was working.
Then I loaded up FPSE, still doesnt not recognize the Wiimote in the settings. I'm not sure if I am doing something wrong in the whole deal. Is FPSE supposed to connect to the Wiimote automatically? Am I supposed to configure the settings under Input in settings? In settings I have these options: Pad Type (Analog, Digital, Guncon)..... Bluetooth Pad Port 1 (iControlPad, Zeemote, BGP100, Disabled) ..... Hardware keys, to manually map the buttons of the above controllers I suppose, since I cant get it to work.
Does anyone have a good working version of PSX4Droid they can send me? lol I'm tired of messing with this, but will do basically whatever it takes to make it work. Aside from purchasing some other controller, cant justify that to the wife.
Sorry for the noob questions and thanks for all the help!
EDIT: I'll try to get some screen shots soon, if needed.
Hoppy
Hoppy96pgtbs said:
Ok, I purchased this app, installed it, swiched input to this app (instead of keyboard), connected the Wiimote by pressing 1 & 2 for sync mode, verified controller was working.
Then I loaded up FPSE, still doesnt not recognize the Wiimote in the settings. I'm not sure if I am doing something wrong in the whole deal. Is FPSE supposed to connect to the Wiimote automatically? Am I supposed to configure the settings under Input in settings? In settings I have these options: Pad Type (Analog, Digital, Guncon)..... Bluetooth Pad Port 1 (iControlPad, Zeemote, BGP100, Disabled) ..... Hardware keys, to manually map the buttons of the above controllers I suppose, since I cant get it to work.
Does anyone have a good working version of PSX4Droid they can send me? lol I'm tired of messing with this, but will do basically whatever it takes to make it work. Aside from purchasing some other controller, cant justify that to the wife.
Sorry for the noob questions and thanks for all the help!
EDIT: I'll try to get some screen shots soon, if needed.
Hoppy
Click to expand...
Click to collapse
This sounds like an issue with whatever FPSE is, you should send an email to the guy that makes it if you actually want helpful advice. I may be wrong but seems no one here is an expert on that app
Sent from my DROID X2 using XDA App
Hoppy96pgtbs said:
Ok, I purchased this app, installed it, swiched input to this app (instead of keyboard), connected the Wiimote by pressing 1 & 2 for sync mode, verified controller was working.
Then I loaded up FPSE, still doesnt not recognize the Wiimote in the settings. I'm not sure if I am doing something wrong in the whole deal. Is FPSE supposed to connect to the Wiimote automatically? Am I supposed to configure the settings under Input in settings? In settings I have these options: Pad Type (Analog, Digital, Guncon)..... Bluetooth Pad Port 1 (iControlPad, Zeemote, BGP100, Disabled) ..... Hardware keys, to manually map the buttons of the above controllers I suppose, since I cant get it to work.
Does anyone have a good working version of PSX4Droid they can send me? lol I'm tired of messing with this, but will do basically whatever it takes to make it work. Aside from purchasing some other controller, cant justify that to the wife.
Sorry for the noob questions and thanks for all the help!
EDIT: I'll try to get some screen shots soon, if needed.
Hoppy
Click to expand...
Click to collapse
1. Turn on bluetooth
2. Open up Wii Controller IME
3. Connect your classic controller to your wiimote
4. Connect wiimote by pressing 1 + 2 simultaneously (Wait for confirmation)
(Note: Make sure the Wii that the controller is connected to is NOT ON!)
5. Change input method to the Wii mote
6. Open FPse
7. Press the menu button on your phone
8. Select diamond looking button
9. Select "INPUT"
10. Scroll down the menu and select "Hardware Keys"
11. Go down the list and assign the key that you want FPse to correspond with the key on your classic controller.
12. Play.
L2_n19h7m4r3 said:
1. Turn on bluetooth
2. Open up Wii Controller IME
3. Connect your classic controller to your wiimote
4. Connect wiimote by pressing 1 + 2 simultaneously (Wait for confirmation)
(Note: Make sure the Wii that the controller is connected to is NOT ON!)
5. Change input method to the Wii mote
6. Open FPse
7. Press the menu button on your phone
8. Select diamond looking button
9. Select "INPUT"
10. Scroll down the menu and select "Hardware Keys"
11. Go down the list and assign the key that you want FPse to correspond with the key on your classic controller.
12. Play.
Click to expand...
Click to collapse
I must have a bad version of FPSE, followed this to the t to no avail. FPSE was given to me by a work friend to try out since psx4droid broke. Now the market thinks I paid for it. Could this be an issue? I have V 10.54 I think. Been reading forums @ FPSE as well, its 110 pages tho.
Sent from my DROID X2 using XDA App
Try uninstalling updates and uninstall the program.
Sent from the coolest voided warranty phone ever.
As it turns out, update 2.3.3 broke both of my emulators ability to talk to the Wii controllers. I read something about "Bluetooth stack 2.0" in another thread, not sure what it means, but it sounds like it happened to me possibly. Before the update (rooted) everything worked. After the update, the controllers still connect to Wiimote and Wii Controller, but once the game is loaded it's like the controllers are dead.
Anyone else have this issue after update? FPSE and PSX4Droid do not work now. Actually, FPSE works, wont talk to Wiimote. PSX4Droid flat out broke, will not load games. I tried uninstall/reinstall of everything several times. Same results.
kpa2727 said:
Cyanogen 7 Mod :: I run update-cm-7.1.0-RC0.1, why? because CM uses Bluetooth Stack 2.0 unlike stock sense or other roms, Gingerbread Natively does not even run this that I know of.
Click to expand...
Click to collapse
Part of the thread in XDA.
Any input? Thx
Hoppy
Anyone using FPSe with wiimote care to share their FPSE.ini file?
/data/data/com.emulator.fpse/files/fpse.ini
EDIT: The update to 2.3.3 had to have broken it. Everything worked great prior to that. Just checked on my old D1 and it all worked great. No need for the ini file now, I transfered the one created on my D1 and it was no good. Thanks for your help guys.
Hi, I wanna try to play shadowGun THD on my Prime with the zeemote controller.
I manage to get the contoller set up and map the keys, but how do I make it work with shadow gun?
I looked at shadowgun's setup and didn't see a keyboard/controller keys option.
did anyone manage to get it work? I assume it supposed to work with a zeemote the same as it works with ps3 controller.
thanks
You can try using an IME (Input Method) Like BlueZ to work with the Zeemote, but I haven't tried it with Shadowgun yet.
I know that BlueZ works with a bunch of games/emulators but I don't know if it works with Unity applications or even if it being a Unity application even matters.
I've found that you can also search for Zeemote in the market and there's a bunch of games that work with the controller natively without an IME.
Nope, just tried it. Only the joystick let's you move forward, backward, and side-to-side.
Isn't the Zeemote basically the nunchuck addon for the wiimote with a couple more buttons? If you only have one joystick then you could either only move around and not look, or only look around and not move.
has anyone been able to get the PS3 controller working to control N64oid? the OS recognized input from the controller but N64oid doesnt. any tips to get this to work?
I have gotten a PS3 controller to work in N64oid by using the Sixaxis Controller app on Android market, but it's $1.76. There's a free compatibility checker that will let you know if it works with your phone (it works with the Atrix in general, but there's no harm in making sure).
***CAVEAT***
This program doesn't let the PS3 joysticks work as real joysticks and only sends up/down/left/right instead. It works fine for Paper Mario though, but that's all I can speak for as that's all I use on N64oid.
~Chef
thats what im using it for lol, paper mario. i had version 1.1.4 which worked fine with the joysticks but the newer 2.6.2 version of n64oid doesnt recognize the controller at all. android does.
There is no doubt that PS3 controllers do not connect to any Computer what so ever.
That's not even related to my problem
Werbs said:
has anyone been able to get the PS3 controller working to control N64oid? the OS recognized input from the controller but N64oid doesnt. any tips to get this to work?
Click to expand...
Click to collapse
this might sound stupid, but did you check that the controller options were enabled in n64oid?
i looked arouond in the settings for the option but maybe I overlooked something? what should i check off in the settings?
I'm investigated .15 firmware and found game controllers and BT devices than TF-201 supports. Here's list of them. Please try them out and post yours here
Apple Wireless Keyboard
Thrustmaster T Mini Wirele
Logitech Dual Action Controller
Logitech G25 Racing Wheel (in Compatibility Mode)
Logitech G25 Racing Wheel (in Native Mode)
Logitech Revue Wireless keyboard
Bluetooth AVRCP
Confirmed by XDA users, and 4pda
OnLive Universal Wireless Controller
XBox 360 USB Controller
iControlPad
Sony Playstation®3 Controller (Dualshock3 from PS3)
Logitech Gamepad F310 (USB).
Logitech Wireless Gamepad F710
Motorola Bluetooth Wireless Keyboard (the one styled after the xoom)
Wii Remote (WiiMote), Nunchuk and Classic Controller. (with Wii Controller IME)
GameStop Wireless Controller
Super Nintendo Controller
post will updates by comming new info
thx 4all
OnLive Universal Wireless Controller works too
Thanks. Perhaps this should be moved to Prime accessories.
Are these controllers supported natively, or is it necessary to use 3rd party apps to connect to them?
jkvato said:
Are these controllers supported natively, or is it necessary to use 3rd party apps to connect to them?
Click to expand...
Click to collapse
I get the list of controllers from .15 firmware, so they supported natively.
But alsow game must fully support games controller.
Some times, not all buttons works. For example only moves or fire and jump button,
etc
I have a wired Xbox 360 controller I used with mine (requires keyboard) and it works incredibly well - if the software supports it. You can navigate the home screens easily, just like the touchpad. But, game support is dependent on the game, not OS. For example, Shine Runners works very well, but Dungeon Defenders doesn't see it.
The nVidia marketplace does a good job of specifying controller support.
Hey I'm a noob. How do I pair the PS3 remote with the Prime?
abahimself said:
Hey I'm a noob. How do I pair the PS3 remote with the Prime?
Click to expand...
Click to collapse
Just plagin PS3 remote to the dock
just tried my iControlPad, works with bluez ime app from market (free) and any ''oid'' emulatore (snesoid, gameboid, etc) have not tried other setups
I meed to get a dock n USB controller or a BT controller. these ps1 games is killing me with touch screen controls. I got final doom, quake 2, R-type Delta, Marvel vs. Capcom, XMen vs. Street Fighter, and Einhander all on my prime. they look n play great with the gpu plugin. now I need a damn controller. Hard to play some of those with touchscreen..lol
which one is the one you can buy at Gamestop that's said to work with prime?
the motorola bluetooth keyboard (the one styled after the xoom) work like a dream, shortcut keys, home/back, its one of the less expensive and well made bluetooth android oriented keyboards, and it has function keys for use with a pc as well, well worth the 45$ i paid for it.
stretchwookie said:
just tried my iControlPad, works with bluez ime app from market (free) and any ''oid'' emulatore (snesoid, gameboid, etc) have not tried other setups
Click to expand...
Click to collapse
Can you give me a link on that controller (iControlPad)?
demandarin there's no answer yet, only testing
Hi,
I tried to connect my WiiMotes.
Even though it suggests the codes 0000 and 1234 ,neither seems to do the trick.
Any help would be appreciated.
I've been using the GameStop branded controller. The system seems to treat it as a bluetooth keyboard. If you launch a notepad type app, you can see what buttons map to which keys. But it seems to work to some degree at least in those apps that nvidia labels as "controller" supported.
I think this is already known but the Sixaxis PS3 controller works without any 3rd party apps.
Just plug it in via USB then turn on bluetooth. From then on it is paired and will work without needing USB.
demandarin said:
I meed to get a dock n USB controller or a BT controller. these ps1 games is killing me with touch screen controls. I got final doom, quake 2, R-type Delta, Marvel vs. Capcom, XMen vs. Street Fighter, and Einhander all on my prime. they look n play great with the gpu plugin. now I need a damn controller. Hard to play some of those with touchscreen..lol
which one is the one you can buy at Gamestop that's said to work with prime?
Click to expand...
Click to collapse
noob question, but what do you mean gpu plugin? are you having to use chainfire 3d? or is it a plugin in the ps1 emulator? i just got my icontrolpad so im interested in getting diablo from ps1 to work on it
dime_veyron said:
Can you give me a link on that controller (iControlPad)?
Click to expand...
Click to collapse
http://www.icontrolpad.com/
i bought it directly through them, dont let the iphone on the main page scare ya, this DEFINITELY works on android, both my prime AND epic 4g touch
malybru said:
Hi,
I tried to connect my WiiMotes.
Even though it suggests the codes 0000 and 1234 ,neither seems to do the trick.
Any help would be appreciated.
Click to expand...
Click to collapse
i use Wii Controller IME and its fantastic
demandarin said:
I meed to get a dock n USB controller or a BT controller. these ps1 games is killing me with touch screen controls. I got final doom, quake 2, R-type Delta, Marvel vs. Capcom, XMen vs. Street Fighter, and Einhander all on my prime. they look n play great with the gpu plugin. now I need a damn controller. Hard to play some of those with touchscreen..lol
which one is the one you can buy at Gamestop that's said to work with prime?
Click to expand...
Click to collapse
Hi, you may buy this one
Anyone able to get the right analog sticks on any brand of controller to properly register with emulators (such as N64oid, SNESoid, Gensoid etc.)?
PS3 won't, either hooked up native or through a third-party such as SixAxis Controller. Therefore I'm wondering if any others will, or if it's an issue that will be present regardless.
HowTo
Here is manual
How to connect and use the Wii Classic Controller Pro + Wiimote(you will need both)
Click to expand...
Click to collapse
buxtahuda said:
Anyone able to get the right analog sticks on any brand of controller to properly register with emulators (such as N64oid, SNESoid, Gensoid etc.)?
PS3 won't, either hooked up native or through a third-party such as SixAxis Controller. Therefore I'm wondering if any others will, or if it's an issue that will be present regardless.
Click to expand...
Click to collapse
N64oid only looks for analog input from the left analog stick and ignores the right analog completely. In order to get the C-buttons working, you can use the Sixaxis app in native gamepad mode, disable the 'Right Analog x-axis' and 'Right Analog y-axis', then use the keyboard emulation to configure the right analog stick as digital button presses (you must also have your IME set to Sixaxis Controller). Most other emulators don't use analog, so you can just use the keyboard emulation exclusively.