Hi,
I'm using this rom: http://forum.xda-developers.com/showthread.php?t=1543521
With the stock rom the screen used to turn on when a notification was issued. With this it doesn't happen. I read about BLN but couldn't find a place where it said that BLN is Ace compatible.
Is there any way to make the soft keys or the screen to turn on?
Thanks
With custom rom your screen light wont turn on, thats normal.
Download BLN from market, don't worry, its compatible
But when I install the BLN control it says that the BLN isn't available and must be flashed...
huh? You just need to download BLN free version and enable it.
Saca-a do Play store e instala, nao tem nd q saber.
that's what I did... For what I've been reading the kernel must support BLN and that seems not be the case.. I'll try later again... gotta flash the phone again since I've must have done something not so good to the operating system
Still... no success... first I flashed the blackhawk for CM7.2 and now I have the message "this liblights does not support BLN" help?
NoLed did the trick
Related
Hello everyone, Today I wanted to upgrade my SGS2 Dark Kinght with kernel 2.3 and 3.1.1 to CheckROM RevoHD CheckROM RevoHD4 and after restoring all no problem except that now BLN Control Pro first start I said that was not then I can turn it reinstalled the kernel, I have to reboot and I also enabled the notification option activated flashing just do not work when I get the mess that I do not read the buttons do not light. What can be the first premise that everything worked perfectly??
Hi all, this is my first post, and i searched the forum with no luck. I have a CheckRom RevoHD V4 with the Siyah Kernel 2.6.1. The problem is that my screen won't wake up after some time that it's turned off. It doesn't happen always... it's seems a random behavior... The volume keys works because i can hear the sound of volume up and volume down, but the touchscreen, softkeys, power button and home button doesn't work at all and i can't get my home screen back. I need to remove the battery to reboot the GS2... I experienced this problem with te DarkNight kernel too. I tried to call my phone, i can hear the calling tone but the cellphone doesn't ring. I don't know if it's a rom related problem or it's a kernel problem. Hope someone can help me.
Ps: Sorry for my english
Hello I have a CheckRom v4 for my phone.i think that you to flash again with odin DarkNight kernel version 2.5.2 flash only kernel as a pda with odin
i tried to flash the new siyah kernel 2.6.4 trough CWM but not solved my problem... there is some difference between flashing trough odin an flashing trough CWM?
I have System Tuner for tweaking and set the kernel governor... i don't know if there is some incompatibility with this app and other apps like widgetlooker that need root permissions... really i don't know how i can solve this issue...
redirect11 said:
I have System Tuner for tweaking and set the kernel governor.
Click to expand...
Click to collapse
There you have your problem.
so are you sure that the problem it's related to system tuner?
redirect11 said:
so are you sure that the problem it's related to system tuner?
Click to expand...
Click to collapse
Probably. If you undervolt or underclock your phone to much, you wil get SOD's. That is basic knowlegde if you want to use those apps.
ah ok... but i don't use OC/UC or UV/OV... i only use this for change governors... but i have a question about SOD: the volume keys works in these cases? Cause mine works when display doesn't wakeup...
I'm having the same problem with this rom and kernel. I do not uv or oc. I left those settings alone.
It's really annoying and have left me missing calls because I cannot pick them up.
When using cm7 or stock rom ? Sometime i need to turnoff or i let it out of battery and it automatically turn off! When i turn it on back, it come to the autoupdate firmware screen of b&n and sure after that i cant use it anymore, i must reflash the rom ! It happens usually ! what's problem i meet ?
Hello guys, I've just installed the latest Hydrog3n-ICS ROM and Siyah v3.1 rc3 kernel and my LED touch keys stopped working. I mean, they do not light up when I click them as they once did. I know it's possible to turn them on permanently in device settings but I don't want this. I thought it could be because of BLN without wakelock setting in ExTweaks but then I turned it off and it's still not working properly. What can I do to fix this?
Installed another kernel and it's fine again.
Not long after I enabled the power saving mode on my S2 the device suddenly shutdown (while in my pocket, battery around 60% full) and couldn't turn on again. After 2 days the S2 suddenly booted again but still won't start up all the time when I want to.
My S2 device never had this issue before (I know it is a well known issue but apparently it should have been fixed in JB?)
Software I use:
- Apolo 4.12 kernel (Regular)
- Neatrom Lite
I am thinking of either hardware starting to fail or maybe the Apolo kernel has a bug that was triggered by enabling the powersafe mode?
I am not sure, anyone that can help/advise me?
It's probably a software issue, JB has tons of bugs. What kinda advise do you want? You need to re-install the rom (and clear cache ofc) and if that doesn't work re-install the stock rom via odin and then install neatrom if you want. And just don't use power save mode until you get an update? It's useless anyway... You can also try another kernel, this seems like a kernel problem.
Power saving actually just have a few advantages like turning of un-needed things like haptic feedback and some other stuff which you could do manually, and the main power saving feature is that it limits the CPU to use only 800Mhz max, this might be having some issues with Apollo kernel (as it works fine with stock or stock based kernel like Philz), but Apollo is a powerful kernel and will let you manually adjust the CPU limits even at your preferred limits manually, so if you want to save battery just manually adjust the settings instead of using Power Saving mode.
Sent from my GT-I9100 using Tapatalk
Perphide said:
Not long after I enabled the power saving mode on my S2 the device suddenly shutdown (while in my pocket, battery around 60% full) and couldn't turn on again. After 2 days the S2 suddenly booted again but still won't start up all the time when I want to.
My S2 device never had this issue before (I know it is a well known issue but apparently it should have been fixed in JB?)
Software I use:
- Apolo 4.12 kernel (Regular)
- Neatrom Lite
I am thinking of either hardware starting to fail or maybe the Apolo kernel has a bug that was triggered by enabling the powersafe mode?
I am not sure, anyone that can help/advise me?
Click to expand...
Click to collapse
It may be a bug in that rom. try another rom
Thank you!
Thank all of you for the help and advise!
I will no longer use the powersafe feature and start using the Apolo kernel again, since that kernel gave me the best battery life.
It might have been a coincidence of course that my S2 died/didn't want to start up no more shortly after using the powersafe feature... however from all of the above advise it seems that I don't need that feature anyway so I feel safe to switch back to the Apolo kernel again with my new installed NeatROM SuperLite 2.4.
If the problem returns I'll be here to post it, it might still be a bug in the Apolo kernel of the NeatROM ... I am not sure. Time will tell, or not if it had to do with the powersafe feature which I won't be using any more.
Thank you all!