I recently received this case after having been sent a similar one that was meant for the TF Prime. While not yet generally available, the Dual-Axis was a nice step up for a couple more dollars. All the ports are very much available including the earjack. The cutout on the cover for the camera is still insufficient in my opinion. This could because the thickness of the sleeve makes it a bit distant from the cover and even though aligned, I think the camera lens has more of a wide angle and still picks up the edge of the outer cover. Not a big deal as you can remove the inner sleeve as it is held by velcro and take a photo that way and then put it back in the leather cover.
The whole case feels sturdy and thick and the leather is nice. It also has magnets in the flap to keep it secure. None of the tablet sticks out so I feel confident if I drop it that the tablet inside would come to no harm.
The positions available from the ridges on the inside cover really work well.
One other drawback is the outside cover had no cutout for the speaker though the inner sleeve does. So basically you do have to extend out the sleeve to avoid muffling the sound. However, I have a pair of earphones and with the jack fully exposed that is not much of an issue.
In summary, while this case has a couple of shortcomings, they can be worked around easily enough and in whole I really enjoy this case. Kudos to PC Micro Store on Amazon for sending me this new case in exchange for the one that was for the Prime.
It says on the description that all open ports are available, does that mean you can use the keyboard dock with this?
Sent from my ASUS Transformer Pad TF300T using xda premium
I don't own the keyboard but the bottom of the detachable sleeve has the charging port and the two keyboard attachment slots exposed but not sure that it will still work with the sleeve installed.
If the case still goes around the bottom at all then not likely it will not work as the tablet goes down into the dock quite a bit.
Sent from my ASUS Transformer Pad TF300T using xda premium
Related
Just received the $33 FUSE case [http://electroniccrap.com/store/index.php?main_page=product_info&cPath=5_9&products_id=37] from electronicCrap. It is quite a nice case. I really like the finish on both the outer and inner.
The inside is a stiffer type of velvet or something. Not exactly rough, but not as smooth as microfiber for example.
The exterior is very sharp, and business meeting ready. It is a soft suede-like material and is a nice shade of gray. One big advantage of this material is a slightly higher friction grip on surfaces than leather or faux-leather. If I try to slide the tablet in the case on a smooth surface, it is quite hard. I imagine you could set the case on a dashboard and it would rarely slide.
The tablet is VERY secure in the case, and can be made even more secure with a bit of velcro or some other material to fully secure the closing flap. However, with only friction holding the flap, the tablet won't fall out even if I hold the whole thing by the folding cover and shake it.
The case functions well as a stand, sitting comfortably at all three angles on my lap bot sitting and lying in bed. The cutouts for ports are all perfectly sized. The dock port is accessible for something like the HDMI cable. I don't have a dock, so I am not sure if that would fit. The fabric over the microsd and usb slot is put together a little funny. The bottom edge (somewhat visible in this picture from electronicCrap: http://dl.dropbox.com/u/10015338/Cases/hy3.JPG, it is the edge below the microSD cover) sort of tucks in where it should not, and the part that tucks isn't really necessary. This is a really minor thing that doesn't affect the function, just the form a bit. Seems like instead of an oval cut-out of one large connection between front and back panel it should be just two narrow strips.
The comment Steve makes about the magnets on his site is very true. They are a little on the weak side to close the case, but it doesn't bother me at all.
I ordered my Fuse case from electroniccrap.com last Friday and received it three days later. After three months of using my GTab "naked", I have to say it is a much more pleasant experience using it in the Fuse folio case. As ramerco mentions, the case feels well made. My only complaint is that there is no cutout for the charge status LED on the front of the GTab near the charging port. Otherwise, I would not hesitate to recommend this case.
It's a good case for Gtablet.
I have the P3, and I love it as well. Is the only difference a matter of the P3 blocking the left speaker and the flap on top?
If yes, the P3 is a few bucks cheaper and I highly recommend that too.
i think the p3 cutout for the mini usb cover is not lined up properly. i don't know though, i only have the fuse...
imdaman99 said:
I have the P3, and I love it as well. Is the only difference a matter of the P3 blocking the left speaker and the flap on top?
If yes, the P3 is a few bucks cheaper and I highly recommend that too.
Click to expand...
Click to collapse
The P3 is a synthetic leather PU style case that has a "slicker" feel to it.
The Fuse is almost like a suede feel. They are both great cases. I flip back and forth between both of them to fit my mood
And yes, there is a little bit of an overlap of one of the speakers, but it doesn't affect the functionality that much. It still pumps out descent sound!
I ordered the FUSE case as well and it's great. It's a great bargain. I highly recommend it.
Sent from my TnT-Enhanced using XDA Premium App
FUSE - great case for those without a dock.
I read through a dozen or more threads here looking for info on all of the cases that were compatible with the G tablet. The only noteworthy negative aspect of the FUSE case that I could gleen from the experiences of others was the fact that it did not allow the tablet to dock while inside the case - for that you'd need the CLIP I believe. I didn't see any reason to bother with a dock, so I went with the FUSE (from electroniccrap).
Six months later, I'm still happy with my purchase. The material has held up exceptionally well (my 2-year-old got a hold of the case once and didn't manage to leave any visible blemishes or marks, despite his persistence) and I still like the feel of it. The faux-sued or whatever it is offers just the right amount of texture/friction to hold the tablet 1-handed without fear of it slipping out of my grip.
So, I suppose I should say thank you to all of the posters here who shared their experiences with the various cases - much obliged, everyone.
Just received the rooCASE Slim Fit from PC Micro via Amazon.com. Sorry, I can't yet post links, so the product title is: rooCASE Slim-Fit (Black) Folio Case Cover with Multi Adjustable Viewing Angles for Asus Eee Pad Transformer 10.1-Inch TF101 Android Tablet Wi-Fi.
I had been looking for a while for a case with clips that would leave the bottom edge open so that one could dock the tablet without taking it off, so I was excited to try it out. My initial feelings are very positive.
It's PU leather, so while not top grain, it's still pretty supple and smooth. The leather is also slightly padded, so the case is comfortable to hold. The reinforced edges are crisp and straight, so there's not a lot of give or bend. The interior is a soft, padded microfiber. The foam is pretty firm, so it seems like it might retain its shape fairly well.
Structurally, the tablet is held in by two clips on each side, one each holding the top corners (when in landscape) and the main clip about 2/5 of the way down each side. On the bottom corners, there are clips, but they're more like corner protectors as they're there to guide the tablet when the case is closed.
Setting the tablet in the first two grooves felt good. The furthest groove which puts the screen in the flattest position though doesn't hold very well. This is because the rounded back of the tablet near the edge doesn't let it sit all the way into the groove. This doesn't bother me though since I don't see myself wanting to use it that flat. It actually sits nicely on my lap in the middle groove, so it's nice to be able to prop up the tablet without having to rely upon the dock.
Speaking of which, swinging the bottom edge of the tablet away from the case allows it to easily connect to the dock. Before receiving the case, I wondered whether the clip that holds it closed would get in the way. In actuality, it props up the keyboard rather well -- the keyboard rests flat between being propped up on the clip and because of the way the dock hinge props up the rear of the keyboard. Alternatively, the case cover folds back out of the way easily as well, and kind of works to support the screen a little bit. This configuration is probably better suited for a desk vs. one's lap, but I'll have to experiment a little bit.
I'm interested to see how I like using it over time, but for right now, this case has potential. I was worried about the clips: whether they'd be too weak (they're not) and whether they'd prevent the case from folding flat (they don't). I like that they hold the tablet securely in place, without the need to have the bezel surrounded/covered by leather.
The overall look resembles a small notebook/portfolio and the branding is understated -- just an embossed rooCASE logo in the lower right.
It seems like the case will protect the tablet from accidental bumps and bruises, give it a sleek appearance and quench my thirst for a higher end case until Noreve or Piel Frama attempt to separate me from my money. We'll have to see how durable it winds up being -- right now, the surface seems to repel light scratches pretty well.
Overall, for $30 I'm pretty pleased. And it comes with a small capacitive stylus, that connects to the tablet via a small plastic plug that fits into the 3.5mm jack. Shipping was via USPS and took just two days from CA to the east coast.
Lots of pics to follow.
More pics.
Last two.
(I promise, Mods)
And to complete it all, here's the link: http://amzn.com/B0058DLAA8
Can't wait for mine to arrive!
Mine came in yesterday as well. I am extremely happy with it, I did not anticipate being able to dock it with the case on, so all the best. The bundled stylus from roocase is just the cherry on top!
damn thats nice
It's great news that there's finally a decent case that you don't have to remove in order to be able to dock with the keyboard. Hopefully more manufacturers start making cases in this design.
EDIT: Hmm I have a theory... if you buy one of those cases with velcro at the bottom, could you theoretically dock it without taking off the case by just unattaching the velcro? Can anyone confirm or deny?
Can you fold it up in the dock with the case on?
maxpower47 said:
Can you fold it up in the dock with the case on?
Click to expand...
Click to collapse
no
--------
This is the first case I have seen that uses clips to hold the Transformer, instead of a leather or fabric frame of some sort. I was beginning to think there weren't any out there. Thanks for the review.
Thank you for the review, I was waiting to see if you could plug the dock with the case on..
BTW, there are 2 other brands of what looks like the same case: Acase and Poetic...
http://www.amazon.com/Poetic-Stand-...B3PU/ref=sr_1_5?ie=UTF8&qid=1311946471&sr=8-5
http://www.amazon.com/Transformer-L...Q6J0/ref=sr_1_5?ie=UTF8&qid=1311946529&sr=8-5
SoundSurfer said:
Thank you for the review, I was waiting to see if you could plug the dock with the case on..
BTW, there are 2 other brands of what looks like the same case: Acase and Poetic...
http://www.amazon.com/Poetic-Stand-...B3PU/ref=sr_1_5?ie=UTF8&qid=1311946471&sr=8-5
http://www.amazon.com/Transformer-L...Q6J0/ref=sr_1_5?ie=UTF8&qid=1311946529&sr=8-5
Click to expand...
Click to collapse
Their are the same one from same factory. Just selling via different sellers.
xjarl said:
Their are the same one from same factory. Just selling via different sellers.
Click to expand...
Click to collapse
The Acase one is eligible for Amazon Prime. It can be in my grubby paws tomorrow.
Just received one.
I originally bought the regular multi-angle roocase version. As soon as this slim-fat was announced, I unloaded that one and pre-order this one.
They delayed the shipment for 1 week but refunded my $5 shipping charge (nice). I like this slim-fat version a lot. It's the best case I've seen (I need some protection, but I really hate to cover-up the beauty of the Tab).
Received mine today. I echo everything that the OP noted. Very nice and exactly what I was looking for.
I just ordered the $18.95 Poetic one with free shipping. I can wait a few days and save $16
I have a cheapy $12 case now from ebay. Gets the job done, but with my ghetto cutting of the area around the light sensor and front camera, it looks just a wee bit unprofessional.
Thank you for the informative review. You may have just convinced me to buy a second case.
I already have this on order it shipped out yesterday so I'm hoping it arrives soon, and after your review and all the great pics. I hope it comes even faster now. Thanks for your time in making this, good info.
thaibruin said:
I just ordered the $18.95 Poetic one with free shipping. I can wait a few days and save $16
I have a cheapy $12 case now from ebay. Gets the job done, but with my ghetto cutting of the area around the light sensor and front camera, it looks just a wee bit unprofessional.
Click to expand...
Click to collapse
I unfortunately do not have that kind of patience. Case ordered and overnighted. My TF will finally have a case that doesn't hide it.
Mine arrived today too. OP is spot on - this is a great case; clean lines, excellent fit and looks sharp.
There is no slot at the bottom to connect to the charger, so to charge it, I have to lay it face up w/ the cover open.
rooCASE Dual-View Multi Angle (Black) Leather Folio Case Cover for Sony Tablet S1 - From Amazon.com, USD$29.92 + Free Super Saving Shipping or Free Two-Day Shipping with Prime
I bought this last week and managed to use it over the weekend. The look and feel is genuine leather with micro suede interior. It doesn't feel bulky on the slate side but over on the wrap design, it isn't too bulky. The case itself is very light weight and durable.
There are two parts to the case itself; the cover that goes on the tablet itself and the outer case that wraps around the cover and tablet. The cover on the tablet is removable from the case and is attached to the case via velcro (velcro on the inside of the case and felt on the rear cover). It comes with a magnetic flap closure. Their are openings around the cover that gives access to all ports and controls. The cover isn't blocking the front camera, rear camera, or the IR remote.
This will NOT work on the cradle, however.
There are three angles you can place the tablet. Since this is a dual-view multi angle case, you can have the tablet placed in landscape or portrait mode and utilize the three different angles.
This is a better option than the carry case offered by Sony. I would highly recommend this. I've actually accidentally dropped it once with case and cover on, and there was no damage to the tablet or the case itself.
Im wanting to get this case. Question, do you detach the tablet and reposition in portrait using the velcro part?
Sent from my DROID X2 using XDA App
jml215 said:
Im wanting to get this case. Question, do you detach the tablet and reposition in portrait using the velcro part?
Sent from my DROID X2 using XDA App
Click to expand...
Click to collapse
Yes, you do.
This is a review for
VERTEKS (TM) Asus Eee Pad Transformer PRIME TF201 10.1-Inch Android Tablet Wi-Fi Multi Angle View Leather Folio Case Cover (Black)
PICTURES
The case shipped out of Anaheim, California. As this not is shipped from Amazon at the moment.
I received it in 1 day (shipped via USPS) and the packaging was nicely done, not cheap.
The case some with a 100% satisfaction guarantee card, which is a nice touch. It came with a foam insert to keep case integrity during shipping.
Upon removing from the packaging, the case has a nice leathery smell. The leather is very nice, and has a slight rubbery texture. It is more sturdy than a soft case, but less than a hard case.
It has openings for control of the TFP on top, left right when the case cover it closed. Sadly, the USB plugin is not available when the case is closed (i just charge with the cover tucked back). It also has holes front/back camera, light sensor and the little charging arrow at the bottom of the device
The case is designed to have stand-up support (as seen in the amazon pictures) It is really nice, and uses velcro to stay in place. I played with my TFP considerably with it standing upright and it was very stable.
The inside is coated with a nice, soft, fabric, perfect for encasing the fragile TFP back.
All-in-all, i found this to be a PERFECT case, just what i needed.
Wrap Up
Pros:
Durable leather exterior
Soft, plush interior
Access to top,right,left buttons and slots
Front and back camera/light sensor holes
Stand-up support
Front and back cover
Full access to device touch screen
Cons:
No charging access while screen is fully closed
Feel free to ask any more questions or request any more pictures!
I am very happy to hear this mine just shipped Friday so I should have it soon and I got it for $9.99!
Does it have a closing flap (that is to be wrapped around to the back of the tablet) from the side, where you insert TFP into the case? Do you get what I mean? and where the Velcro exactly is?
Yes and in the form of two 1.25" wide strips that border the charging port giving about a cm of birth on each side of it. It is one solid of piece of leather.
All in all this is a great case the only "flaw" would be that you cant charge it when its closed. But if it was designed the opposite way the web cam and camera operation would be upside down.
If you really wanted to you could cut a notch in the spine area and give it a run on a sewing machine for strength. Then problem would be solved.
I've dropped it a couple times and it was very protective.
Hi all,
Here is my review of the Sikai leather/plastic case, as sold by Amazon. For comparison, I have had my Prime in the Poetic cover since I got it. It was okay, but didn't have a charging slot in the spine so it had to be open to be plugged in - plus the nearly-flat angle was nearly-useless because the cover kept slipping out of the tab you tucked it into. I had ordered the GreatShield folio case, but returned it because I didn't like the way the case gripped the tablet, plus I didn't like that to close the cover I had to put pressure on the screen to slide the clip past the edge.
Onto my review...
As mentioned in other reviews, it is a strange mix of black leatherette and dark brown plastic. The plastic back plate is great - the Prime snaps in and seems to be held quite securely. Similar to many iPad covers, it just wraps over the edge - enough to hold, but out-of-the-way enough to really reveal the sleek Prime look. The main portion of the back plate is the black leatherette material, with only the outer edge showing the brown plastic. It has all of the necessary cutouts - including (apparently) the ability to have the dock attached and still close the cover. That is because the "hinge" pieces that connect the cover to the back plate are elastic. I don't have a dock, so I can't comment much on that.
The leather-ish cover looks to be two pieces glued/sewn together, with two bends in the midde - allowing it to be folded up in a triangle shape. Both angles I tried seem to be reasonably stable while typing. About the two layers of the cover...they might have been able to get away with only one, giving it a sleeker appearance, but they had to account for the strap that slips over the sides to hold the cover against the screen. The strap is fine, and gives it an upscale look, but I would have preferred a more unobtrusive solution with magnets or something similar. Overall, the case is skinny enough - just about the same thickness as my Poetic case. That is actually a bit of a downer since I expected this to be thinner since the Poetic case has that layer around the bezel with the magnets in the corners.
There are a few tiny fit-and-finish things that I didn't expect to see in a $30 case. The leather part of the back plate doesn't always make a perfect fit with the plastic border. I'm really nitpicking here, but when this costs three times as much as my Poetic case, I was expecting Ferrarri-quality stuff. I know - it still only $30 so I won't beat them up (much) for it.
Overall, I really like the Sikai. It has a superior look to the Poetic - that one hid all of the nice features of the Prime underneath the protective layers of the front/back/cover. When all that is exposed is the center part of the screen, it almost doesn't matter anymore what Asus designed it to look like. The Sikai shows the Prime's lines and curves much better than the other cases I have seen. The plastic seems tough enough to not break or wear any time soon, so as long as the leatherette holds up, I say this is the best case available for the Prime under $30...
By the way, when ordering from Amazon, it ships from Hong Kong. I placed the order on June 18th, and got a confirmation within 24 hours that it had shipped. However, the confirmation email said my ETA was JULY 31st! Needless to say, I was very happy when it arrived today instead...
I figured there were already better pictures available than my crappy phone can provide, but I can take some close-ups of specific features if requested.
Thanks!
swordsman74 said:
It has all of the necessary cutouts - including (apparently) the ability to have the dock attached and still close the cover. That is because the "hinge" pieces that connect the cover to the back plate are elastic. I don't have a dock, so I can't comment much on that.
Click to expand...
Click to collapse
The dock works great with this case!
yeah I've had this case for a few weeks and its very functional. I really like how it doesn't cover the bezel on the prime like the sikai fiber case and you get multiple angles that actually work
My only complaints are that its a bit on the heavy side and because its designed to be put into the dock with the case on, the steepest angle isn't quite as steep as other cases because the flap slides out making the "hinge" not at the fold but an inch out
oh and the case is kind of ugly haha