Hi
I have tablet (non brand) when I connect it to the windows 7 pc the windows reported that it can not find the driver and it appears under the "other devices" with the device name "Android>
I did my homework and google abt the problem but the keywords are very confusing
any hope to find the the driver?
thanks
Hi,
You should try to find the model of your device and search for drivers on the internet.
Usually, when you connect you tablet to a Windows PC without usb debugging, you can access the contents of the SD card, just like you would with a USB stick.
But if you activated the debugging, you need the driver.
All the best.
croq said:
Hi,
You should try to find the model of your device and search for drivers on the internet.
Usually, when you connect you tablet to a Windows PC without usb debugging, you can access the contents of the SD card, just like you would with a USB stick.
But if you activated the debugging, you need the driver.
All the best.
Click to expand...
Click to collapse
Thanks For your kind reply
actually I want to connect it with debugging enabled
below some information from the device
Model number M711
Android version : 4.0.3
baseband version 0.7
kernel version 3.0.8
buildnumber 97F1-D2-H2-H01-W402.20120210
thanks
any hope good guys?
Related
Hi guys. I'm running latest Tshiba firmware.
I used SuperOneClick with no success. I tried on 2 computers, but application freezes and do nothing...
Any other suggestion?
I root it with SuperOneClick? Try second modw for rooting that is avible in app.
Jon2555 said:
I root it with SuperOneClick? Try second modw for rooting that is avible in app.
Click to expand...
Click to collapse
Sorry, what's the app?
Have you enabled "usb debugging" on tablet before starting SuperOneClick on your PC?
usually this is "root" of the problem
sader0 said:
Have you enabled "usb debugging" on tablet before starting SuperOneClick on your PC?
usually this is "root" of the problem
Click to expand...
Click to collapse
Hi, i know my problem now. I can't get Folio 100 recognised by Windows 7.
Always is recognised as "Toshiba Mass Storage" or "H:\".
I tried already on two differents computers (two with Windows 7), one Windows is clean install i can't install ADB driver.
I downloaded Android SDK r11 from here
I installed Java Development Kit since Android SDK won't run without it.
I run Android Manager, install only platform-tools for adb
I install Google USB and add lines for Nvidia Tegra 2
I do cmd echo
Restart
I put Toshiba Folio in Debug Mode, plug-in...
Windows install Mass Storage driver only...
Turn off Debug Mode and turn on... Device goes to Mass Storage Mode...
Windows won't do anything with modified usb driver inf
Windows eventually installs a device as "H:\"
Nothing more.
Please help, thanks in advance.
Hi again.
Also, i can install ADB, Android SDK and SuperOneClick on Mac... But i don't know if i can tweak usb driver for doing root here.
SOLVED WITH FASTBOOT
Thanks to all!!!
Hey folks,
got a "little" problem with my device. I tried to copy some videos of it and it just won't work.
---
I connect my device to my PC and these things happen ...
Windows 7 x64:
Nothing.
Windows 7 x64 with Kies installed:
Windows sees that there is a new device, but it won't let me open as a storage ... "Code 10" in the device manager.
Windows 7 x64 with Kies installed and device in mass storage mode:
Windows sees that there is a new device, but it won't let me open as a storage ... "Code 10" in the device manager.
Ubuntu 11.10 x64:
Nothing.
Ubuntu 11.10 x64 and device in mass storage mode:
I see some files on my device, but when trying to open them, I only get some errors ... the real problem here, when I disconnect the USB cable (or unmount) then there are no files on my device left ... everything has been moved to "lost.dir" and I can´t open them from there, not even from my phone.
---
I tried to connect with USB debugging enabled, but it would work.
Any ideas?
/Edit 1:
The only way to copy stuff over to my computer is by using Kies Air ... and it takes ages for HD videos.
/Edit 2: THE SOLUTIONS LOL :-D
1. I had to connect my device via another USB slot
2. when USB debugging is enabled, it still wouldn't mount; then I installed this app https://market.android.com/details?id=com.jrtstudio.automount and now everything works just fine
freakin.ro said:
Hey folks,
got a "little" problem with my device. I tried to copy some videos of it and it just won't work.
---
I connect my device to my PC and these things happen ...
Windows 7 x64:
Nothing.
Windows 7 x64 with Kies installed:
Windows sees that there is a new device, but it won't let me open as a storage ... "Code 10" in the device manager.
Windows 7 x64 with Kies installed and device in mass storage mode:
Windows sees that there is a new device, but it won't let me open as a storage ... "Code 10" in the device manager.
Ubuntu 11.10 x64:
Nothing.
Ubuntu 11.10 x64 and device in mass storage mode:
I see some files on my device, but when trying to open them, I only get some errors ... the real problem here, when I disconnect the USB cable (or unmount) then there are no files on my device left ... everything has been moved to "lost.dir" and I can´t open them from there, not even from my phone.
---
I tried to connect with USB debugging enabled, but it would work.
Any ideas?
/Edit 1:
The only way to copy stuff over to my computer is by using Kies Air ... and it takes ages for HD videos.
Click to expand...
Click to collapse
1) Using a Rom? If yes check in thread if it, if this problem is already known.
2) Tried different USB-Slots?
3) Connect phone, search in device manager for the device and uninstall the drivers.
Then un- later replug the phone and wait if all drivers got installed again.
CHEERS ;-)
Sent from my Galaxy S2 - I9100 with SensatioN Rom!
Lost DIr is for error files that have been corrupted .
jje
... connected to another USB port and it really works :-D it´s on the same controller ... so now I´m really confused lol.
I´m running Samsung's stock 2.3.4. I´ll try to get ADB working later and if it works i´ll close this, thanks very much
freakin.ro said:
... connected to another USB port and it really works :-D it´s on the same controller ... so now I´m really confused lol.
I´m running Samsung's stock 2.3.4. I´ll try to get ADB working later and if it works i´ll close this, thanks very much
Click to expand...
Click to collapse
You're welcome, mate ;-)
Sent from my Galaxy S2 - I9100 with SensatioN Rom!
JJEgan said:
Lost DIr is for error files that have been corrupted .
jje
Click to expand...
Click to collapse
I know, is there a way to restore this files?
so, just tried another app:
https://market.android.com/details?id=com.jrtstudio.automount
it mounts my device correctly even when USB debugging is enabled :-D
[/Bhi i have a very common but strange problem i am mentioning below plz any good solution will be appritiated
1) i have chinese phablet mtk8389 hd89 dual sim, 1gb ram, gps,quadcore, wifi,bluetooth,and microusb port
problem is that if i connect it to any otg or usb cable to connect with computer it dont show any response but just start charging
then i find oht a solution that i need to fix a file insode android system/etc/permissions name of file android usb host .xml
i go to file and add the file but actually file not get added even i cannot edit any system file because i dont have permission
then i find out that for doing that i need to root the device
but how stupid is that if i dont have usb host mode active how i can onnect my device with computer for root?
it does not connect even dont show in computer that some usb device ger connected its very complicated can any one give splution
how i can enable usb host mode with out root device and if i have to root the device how i can root with out usb mode not working because with out usb host me the device will not be connected .
any suggestion will be appericiated
i think my device is not rooted but i have acces to android all system files but i am unable to edit any file like it have write
protected .
click on usb debugging!
or install moborobo pc suite for chiness android
problemmmmmmmmmmq
anabhi said:
click on usb debugging!
or install moborobo pc suite for chiness android
Click to expand...
Click to collapse
hello please understand my problem i click onusb debug is very simple answer
i know what i need to click and i click on every posible option but the problem is that
microusb port is not connecting with any thing if i connect with usb stick or with card reader by otg cable
or even if i connect with computer computer dont give any sound i know u will say install mobo robo suit
but my problem is that even if software is not install computer should tell that a usb device get inserted but could not be recognized
but no nothing is showing also i am not able to edit my android filesystem files
i listen if device is rooted it should not show the system files but i can see all files so its quite confusing plz give me a good solution
that how i can active the capacity to use micro usb port because right now its just charging nothing else
use z4root,frameroot android for root
gsm forum will give u better soultion ,search on google
try other usb cable !
anabhi said:
use z4root,frameroot android for root
gsm forum will give u better soultion ,search on google
try other usb cable !
Click to expand...
Click to collapse
i just wantto know thatif usb is showing no connection with otg or computer then how i can root with any software i try
some root softwares but it says no device connected
second i change many cables and with other devices same cables are working but not wi this one
third i just want that ,y microusb port start functioning for that i need that i cam edit android file system files
is there any way that i can edit the files like i get permission to edit system filez?
or is there any idea how i can enable super user because it is not enable any suggetion will be apperiaciated
I've got an Android based device that is detected by Windows, when I give it a driver it correctly shows in the System Manager.
However, none of the usual programs to root the device are detecting it.
What should the next course of action be to root a device that is not detected by these programs?
Thank you,
SR
Anyone??
sr_droid said:
I've got an Android based device that is detected by Windows, when I give it a driver it correctly shows in the System Manager.
However, none of the usual programs to root the device are detecting it.
What should the next course of action be to root a device that is not detected by these programs?
Thank you,
SR
Click to expand...
Click to collapse
have you switch on the usb debugging toggle?
Yes I have,
Windows detects the device as an exclamation, I've fed windows different drivers that allow the device to be detected as a Android Device, I can transfer files to the memory card on the device, however when it comes to trying to use a program such as Tasselhof - Root, or 1 click root the programs indicate it is not detected.
Would I be better off with Linux instead of Windows to try and attempt this?
Thanks you for your reply,
SR
My last attempt to reach out.
Am I better of in Linux?
ANY INFORMATION IS GREATELY APPRECIATED!
SR
Hiya.
Same issue. I have both a SGS2 and SGS3. Laptop has three USB ports and I have two cables.
I have installed the Samsing drivers and enabled debugging on both phones.
Odin simply will not see either phone, on either cable, in any USB port.
Platform is a HP 8460 Laptop running Windows 7 Ultimate x64.
So, er, help?
Hello, I'm facing this problem from many years in my phone, i can't plug in my mate 10 to any pc, it always says usb not recognized,
all drivers installed correcly with hisuite , my cable usb is new,
i changed today the USB charging port of the phone at Huawei care service, and i reset factory the phone , still same problem.
I'm still having the same stock rom on the device,
is the "usb not recognized" problem can be a software problem in the phone? thank you for your experience.
chahine21 said:
Hello, I'm facing this problem from many years in my phone, i can't plug in my mate 10 to any pc, it always says usb not recognized
Click to expand...
Click to collapse
I'll try to help you but I'm not an expert, and yet I've had EVERY problem you seem to be speaking about.
a. I have had broken USB ports
b. I have had broken USB cables
c. I have had the USB drivers not install on Windows
etc.
Given I've had some of the same problems, I feel for you, so my first advice is to simply give up on USB for everything that you can.
Specifically, if you can turn on USB debugging and Wireless debugging in the Developer options, you can operate the phone over Wi-Fi using the Windows monitor, keyboard and mouse as shown in my screenshots below.
You don't need anything installed on Android to use these FOSS solutions on Windows to operate the entire phone over Wi-Fi as of Android 12 (which eliminated the need for an initial USB connection to establish the Wi-Fi connection).
In summary, I have had similar problems with USB where I've given up on USB and switched to operating Android over Wi-Fi and even mounting the entire Android file system as a Windows drive letter over Wi-Fi using free software.
a. adb
b. scrcpy
c. vysor
d. webdav
Use Windows Event Viewer to check for error messages on the PC.
If the problem is the PC it will likely show up there and give you more troubleshooting clues.
Thread closed at OP's request.