Ok so I got my phone s-off recently and was trying to flash the Team PkmN - Venasaur Rom v3.2.0. So after doing that i noticed that it would crash like every 5 minutes and I could never get any sound. I flashed the gingerbread patch and now it works fine. Now the question is my internal and external memory will not read but it was doing fine be fore I used the patch. So this makes me thing I'm running the Ginger bread firmware and not the 3.14 leak. But when I S-off'd it i used the 3.14 software because i thought that is what I had had because it was what was installed on my phone. So Is there any way to tell exactly what my phone is running. I have it S-off with hboot 2.21 and the PkmN rom installed. And also i saw a post on the S-off thread that had instructions to fix the internal and external memory will that work for me?
Sorry for the long post and thanks for the help.
Re-run the 3.14 ruu and reflash the rom
I have tried reflashing the ruu but for some reason every one that i download won't install and when i try and open it on the pc they all say they are invalid. and after trying to do the meomry fixes my phone will no longer connect to my network (So i have no service)....any advice for that? Or am I just screwed?
you can't run it as an .exe (Because it's not a real ruu)
it's a zip file, you must rename it to ph98img.zip and put it on your sd card and flash it from the bootloader... these instructions are all over the download links...
READ UP!
you're totally not screwed... all the info you need is here via search... but if you get antsy, join us on IRC and someone will be around to help out realtime.
I am well aware that it is a zip file and when i try and open the zip it tells me it is a invalid file on the computer. And how would one go about joining this IRC?
I'm on the IRC but could you maybe point me in the right direction for my problem on here? I've tried searching but since i don't really know what the problem is i don't know what to search.
....OK I'm an idiot apparently you have to put the back on the phone for it to work.....
Related
I have a Thunderbolt that I keep downgrading so I can root it but those dam automatic updates are unstoppable and I want to know if I root it while on .5 will they keep updating or will the new root/rom stop it once and for all. Cause i heard if it updates while rooted phone gets messed up. If your rooted you would know thanks for reading!
you can root the .5 then flash the new .9 rooted rom and it will stop the update notices plus most roms block the update from happening anyway
Jrocker23 said:
you can root the .5 then flash the new .9 rooted rom and it will stop the update notices plus most roms block the update from happening anyway
Click to expand...
Click to collapse
Would greatly appreciate if you or some else could post simple directions so I don't mess it up. I already no how to downgrade to .5 and I'm getting the idea that your saying use revolutionary to root then flash a rom. If that's the case then let me know and recommend a rom that everything functions normally on and I will be one happy android
1. Downgrade to .5
2. Run revolutionary to gain s-off
3. Boot into recovery and flash superuser.zip from revolutionary website to gain root.
4. Flash a custom Rom or stock rooted .9
And always check the md5 checksum of the files you download before flashing to verify the integrity of the file.
***LOCKED*** On Bootloader
Hello All,
First of all thanks for the awesome easy guide !!
This is the first time I am rooting my HTC Tbolt and have had an issue to start with.
Used the instructions in the link below:
http://forum.xda-developers.com/showthread.php?t=1401959
After I download the 2.11.605.5 downgrade zip, I rename it, put in on the SD Card and go to HBOOT and it installs the downgrade just fine.
But at the end of this process, when I try to get the MR4 Radio onto the SD Card and install it, it simply does not happen. HBoot checks for the file, finds it, but nothing happens. I have renamed in properly and followed instructions to the dot.
I also noticed a ***LOCKED*** right on top of the screen and I think this could be an issue.
Can I go ahead and proceed with the Revolutionary Root Technique ? Would this be possible at this point ?
Is there anyway I can get Flash the MR4 Radio before I actually root ?
Also, would I be able to flash the MR4 Radio onto my device after Rooting ?
Any help is much appreciated !
Thanks in advance !
Cheers !
Go ahead and finish the root/recovery/superuser process. Take the .5 and radio images off your SD card for the time being.
You don't have to flash the radios yet, if at all, honestly - depends on what ROMs you wish to run - if they require radio(s) different than what you have, flash them then.
Obtain root and back it all up first, then next steps.
sidrockrulz said:
Hello All,
First of all thanks for the awesome easy guide !!
This is the first time I am rooting my HTC Tbolt and have had an issue to start with.
Used the instructions in the link below:
http://forum.xda-developers.com/showthread.php?t=1401959
After I download the 2.11.605.5 downgrade zip, I rename it, put in on the SD Card and go to HBOOT and it installs the downgrade just fine.
But at the end of this process, when I try to get the MR4 Radio onto the SD Card and install it, it simply does not happen. HBoot checks for the file, finds it, but nothing happens. I have renamed in properly and followed instructions to the dot.
I also noticed a ***LOCKED*** right on top of the screen and I think this could be an issue.
Can I go ahead and proceed with the Revolutionary Root Technique ? Would this be possible at this point ?
Is there anyway I can get Flash the MR4 Radio before I actually root ?
Also, would I be able to flash the MR4 Radio onto my device after Rooting ?
Any help is much appreciated !
Thanks in advance !
Cheers !
Click to expand...
Click to collapse
Why are you hijacking every thread with this post?
Sent from my ADR6400L using Tapatalk
So I don't know why, but the RUU exe files just don't work for me. I've done everything but start fresh on my PC, but it's exam week in a computer modeling class and I just can't do that right now!
I've had nothing but problems since I attempted one of the 2-step processes out there for updating to the radios/kernels, so I really want to get through an RUU so I know I'm clean at my lowest levels.
I have found the PH98...zip files for the shipped version of the ROM, but thoes don't work due to my version of HBOOT (not mainver.. that never got updated).
Does anyone out there have one for the newest RUU? At this point, I think flashing that from HBOOT is the only option I have.
I have no idea how to extract it myself, so I can do that too if someone can tell me how!
Thanks for any help.
a-jive said:
So I don't know why, but the RUU exe files just don't work for me. I've done everything but start fresh on my PC, but it's exam week in a computer modeling class and I just can't do that right now!
I've had nothing but problems since I attempted one of the 2-step processes out there for updating to the radios/kernels, so I really want to get through an RUU so I know I'm clean at my lowest levels.
I have found the PH98...zip files for the shipped version of the ROM, but thoes don't work due to my version of HBOOT (not mainver.. that never got updated).
Does anyone out there have one for the newest RUU? At this point, I think flashing that from HBOOT is the only option I have.
I have no idea how to extract it myself, so I can do that too if someone can tell me how!
Thanks for any help.
Click to expand...
Click to collapse
u can just pull the "rom.zip" from the RUU and rename to PH98IMG.zip and ur good to go.
dl this for a how-to on how to do this..
http://forum.xda-developers.com/attachment.php?attachmentid=486701&d=1294753279
You did relock your bootloader before running the RUU right?
andybones said:
u can just pull the "rom.zip" from the RUU and rename to PH98IMG.zip and ur good to go.
dl this for a how-to on how to do this..
http://forum.xda-developers.com/attachment.php?attachmentid=486701&d=1294753279
Click to expand...
Click to collapse
Awesome, thanks!
OLDsJUNKIE said:
You did relock your bootloader before running the RUU right?
Click to expand...
Click to collapse
Oh yeah. Really, tried everything. It sees the phone, reads the current build, goes through the next screen or two, and then once it says "Rebooting to Bootloader" it either sits there for a couple minutes till it times out and errors or errors immediately. I cannot find any other posts of people having problems, so I'm really at a loss. Makes me worried about having more troubles once the official ICS build comes out... but I probably have a lot of time till then.
Thanks guys!
Tried this as well, and my phone is not seeing the file
Make sure you are naming the file correctly "PH98IMG. zip" the instructions provided give a different file name than want the Rezound uses.
a-jive said:
Make sure you are naming the file correctly "PH98IMG. zip" the instructions provided give a different file name than want the Rezound uses.
Click to expand...
Click to collapse
I updated to the latest ota that verizon sent out. I didnt flash a rom, only perm rooted/unlocked...I relocked my phone tried the ruu exe many times didnt work..I done a backup of my nandroid but it took me back to the earlier firmware but still have the updated radio..So, I will relock it and place this on my sd card and try again..I was getting error 140 on the ruu exe
Here is the no-brainer fix for those that end up having Mainver issues, or maybe want to come back from an ICS ROM to GB and RUU and the normal methods don't work...
Go to www.scottsroms.com and hit the download section, look for Rezound and Stock Roms. Grab his boot image for the latest OTA.
Then download his "Cleanflash" utility and copy the boot.img file to that directory on your PC.
Run it and select option "2".
That restores the stock boot image and mainver right there. If you made a Nandroid of your system from before you went to ICS, boot into recovery and restore it. His tool will also install Amon Ra or CWM recovery, just like the boot image, download the one you want and copy that recovery.img to the cleanflash folder and run the tool.
I went from a completely hosed ICS install which would not allow RUU or Hbooting the PH98IMG.zip file... nothing worked, was contemplating replacing the phone, when I tried Scott's tool to push the stock boot image to the phone and then restored my Nandroid.
Worked 100% in under 5 minutes, the Nandroid Restore taking most of that time.
Hope this helps!
Hi! Running into some trouble. I would have posted this in the development area but I am not allowed to until I have 10 posts. I went through the process of unlocking then rooting using amon ra, but thats the last thing I did right. I was in recovery and made the mistake of thinking I could restore an old nandriod, which happened to be from my bionic. Well now I am stuck at the HTC white screen and cannot get anywhere. I downloaded the all on one kit and successfully booted into recovery using it, but even after doing a full wipe I cannot get anywhere. I am new to HTC and with a moto device I would have just sbf'd back but I dont know what to do at this point. Any and all help would be appreciated, thanks!
What did you try to restore and dis you install re install the kernel for it
sent from ics land
I tried to restore a nandroid backup which is what I am guess caused the issue. I am new to HTC and its process, so I am unaware what you are asking by kernal. I unlocked the phone and installed amon ra 3.14 and that was it. Once it was installed I went into recovery and tried the backup, which I am now regretting. Sorry, completely new to this process, thank you very much for your patients
Just download a new ROM in the development thread.
Okay, thought that may fix so I have been downloading one, just hasnt finished yet. Once completed, do I just move it to my SD card, pop it into my phone, boot into recovery and load the zip? Never done it before, just want to fact check.
Is it an ICS or GB ROM?
It is one of the ICS roms....sigh, lol, guess that complicates things. Well, since I have already gone this far, should I go ahead and just relock, load new leaked RUU then unlock and load ICS rom OR forget that, download a GB rom and just flash it?
No you're good with downloading an ICS ROM. Did you also download the PH98IMG that goes with it?
I downloaded earlier when trying to root with Amon Ra and and got a message that it was out of date, so I thought it PH98IMG was Amon Ra from what I read in the forums and downloaded the new 3.14 and loaded that. Was I mistaken? If so, what is PH98IMG? There is a wealth of knowledge on this site, just really hard to piece it all together, lol, thank you again for your patience.
I was confused at first on what it was, too. I may not be 100% on this but it's essentially the kernel for the ROM. Since we don't have s-off we have to manually flash kernels in HBOOT instead of just flashing them in recovery.
What you wanna do is rename whatever the kernel is to just PH98IMG(it usually has it already in the name). Delete whatever comes after it. So it will say PH98IMG.zip afterwards. Then what you'll wanna do is put it in the root of your sd card. That means don't place it in any folder.
Flash the ROM first in recovery then go into HBOOT and it will read the PH98IMG.zip and prompt whether you want to update or not. Hit volume UP to update and then reboot and you should be good.
Also, make sure you delete the PH98IMG.zip from your SD card before going back into HBOOT again because it will keep asking you if you want to update it. This will prevent you from getting into Recovery from the Bootloader and if you ever get stuck in a bootloop, like you just did. The only way to get back into recovery would be to remove SD card and connect it to another phone or Computer and delete it that way.
Woah, excellent, just want I needed, some simple breakdown of everything. Once last favor, I searched for the PH98IMG(cant remember where i got it earlier) and there are alot of items named the same thing. Can you point me in the right direction of the one I need?
Which ROM are you trying to flash?
CleanRom 4.0
Well, actually you will need to relock and download the RUU if you want to use that ROM.
ok, downloading the RUU now and have the Rom downloading as well, once they are finished I would relock, load the RUU, unlock then load the new Rom right?
Yes that is it. While running the RUU follow the directions from Scott to the T. He has them posted in the first post, or at least a link to his directions.
I feel much safer if I can talk to someone live. Can use whatever program you want to communicate with whether through rezound irc, aim, skype etc.
My setup right now:
- on gingerbread running bamf 1.x (don't remember the version #)
-Amon Ra recovery
-dsb's kernel
I want to s-off and install the venasaur rom. My concerns are:
-firstly s-off
-update to ics hboot
-what do i do about my current kernel? Do I have to get rid of it before updating it to the ics hboot?
-finding a new kernel (recommendation based I guess)
-installing the rom itself (easy)
So I guess the hardest part would be s-offing and the questions on the ics hboot. Any takers? I'll try not to waste much of your time =(
Okay so this process was a lot easier than I anticipated but hows here I did it:
First - s-off. I followed these instructions. Pretty clear cut and got it done on the first try
trickster2369 said:
Excellent. I just achieved s-off on the second try, after drinking since 2 this afternoon on the golf course. Was running the ICS Leak before doing the s-off method. Steps I took, if it helps anyone:
1. Downloaded the proper file for my situation.
2. Unzipped contents, placed the 3 files in the same folder as ADB/Fastboot.
3. Removed sd card I normally use, replaced with original Dinc sd card.
4. With phone booted normally into BAMF Evita 2.0, hooked up USB cable.
5. Went into folder containing s-off files and ran Controlbear as administrator.
6. Watched it do its thing and did the "wire trick" when prompted.
7. Phone rebooted a few times, ultimately booting into the rom I was using.
8. Replaced SD card that I normally use, and wrote this post.
This is what worked for me, your experience may vary.
Click to expand...
Click to collapse
Secondly - Now that you're s-off you can put on ics roms if you want but however if you're like me and still have GB on your phone, you need to download the ics leaked firmware (which should be 3.14). Download it here:
http://www.androidpolice.com/2012/0...5-brings-a-handful-of-fixes-and-newer-radios/
Lastly - Reflash recovery and flash your ics rom.
I hope this helped someone
Glad you figured it out, just wanted to let you know, you don't need to install the whole leak to get the ICS firmware if you're s-off. You can download just the firmware from the thread in the Dev section and just install that then install your ICS rom of choice.
Okay, I'm pretty sure that the guys at the other forum site gave up on me. Starting to think that I'm stuck with a paperweight that illuminates a white HTC Screen. I've searched every forum and have had no luck, but here goes:
- I'm on day four of intense troubleshooting. Apparently I'm the only person to ever root a HTC Rezound and then flash a new rom using Rom Manager (first mistake).
-I flashed a new ICS Rom using Rom Manager. I did do a backup using Rom Manager and wiped all of the caches before doing the flash. There was no problem with the install, but once I rebooted, the HTC Screen was my only accomplishment. In addition to that, the CWM Recovery Tool did NOTHING.
After reading and reading, I finally realized that only idiots like myself would still be using Rom Manager over Aman-Ra. Therefore, I installed Aman-Ra via fastboot and flashed a few other roms trying to get past the HTC screen... All of this was without any success.
I was told in a forum by someone much smarter than myself that "the easiest way back to a working phone would be to simply install a new rom like: [ROM 7/11 CONROMV5][4.0.3OTA Sense3.6+DeSense][DeBloated Root Aroma Tweaks][CDMA/GSM]." I was next told that "Conrom will deposit the PH98IMG.zip file on the sd card." This never happened.
SO, Here's where I'm ending up:
It does not boot me into Fastboot after ROM install. Instead, It gives me a "Next" button at the bottom with a log that states:
--
-Checking Model ID
-Success!
Model ID - HTC Rezound (Vigor)
-Ok to proceed
Welcome to CONROM V4!!
Installing...
Sense Selected
Sense Extracted
Face Unlock REMOVE Selected
Face Unlock NOT Extracted
Beginning Experimental Security Identification
read_file() loading "/tmp/initrd.img" failed: No such file or directory
When I click "Next" I get another screen that says:
"Congratulations... CON ROM 4.0 has been installed successfully. Press Finish, and reboot your phone. If S-ON was detected, please reboot to bootloader to flash the boot image. Thanks.
It then goes into the regular reboot process. I do a battery pull, press power+vol down and go back into HBOOT, it runs through it's IMG Check and there's nothing there. I then created a PH98IMG.zip file from the boot image inside the rom's zipped folder. Tried flashing that, and I'm still looking at the HTC Screen.
I've gotten myself into tight jams before, but been able to figure it out... I'm just at the end of my rope here. Someone with more intelligence than myself please tell me what to do to get past this and I promise to never assume that flashing a rom to a Rezound is as easy as it was with my Thunderbolt.
Thanks to whomever takes pitty on me, in advance. (seriously, Thank you)
Start over with a stock RUU zip, renamed to PH98IMG.ZIP. Put it on the SD Card. let er run?
You say you can get to HBOOT?
the only thing that generally fixes huge problems like these are to run the FULL RUU (AKA pull a complete stock rom and rename it PH98IMG.zip, enter HBOOT and let it run TWICE!!) and let it reinstall EVERYTHING (including the radios and such.) Then go into the stock recovery, do a full restore.
Then unlock your boot loader and install Amon-Ra, root and flash a rom correctly
{Full RUU here http://www.androidpolice.com/2012/0...id-4-0-build-3-11-605-22-for-the-htc-rezound/
^ I don't think it is the most recent version, but it should do as long as it is GREATER than the leak you are already on}
Don't try this solution until someone else gives a thumbs up... I don't want to be the one who causes more harm to your phone hahahaha
EDIT: Changed it to PH98IMG, my bad! Should have proof read my post one more time.. Thanks Paulhoop for catching that!
Well he was more complete in his intstructions, but we are recommending the same thing.
However, just want to correct the typo above. PH98IMG... Not PH89IMG
Also not sure about the stock recovery, full restore. But I would let the stock RUU setup run once before going to AmonRa
brandononeal00 said:
Okay, I'm pretty sure that the guys at the other forum site gave up on me. Starting to think that I'm stuck with a paperweight that illuminates a white HTC Screen. I've searched every forum and have had no luck, but here goes:
- I'm on day four of intense troubleshooting. Apparently I'm the only person to ever root a HTC Rezound and then flash a new rom using Rom Manager (first mistake).
-I flashed a new ICS Rom using Rom Manager. I did do a backup using Rom Manager and wiped all of the caches before doing the flash. There was no problem with the install, but once I rebooted, the HTC Screen was my only accomplishment. In addition to that, the CWM Recovery Tool did NOTHING.
After reading and reading, I finally realized that only idiots like myself would still be using Rom Manager over Aman-Ra. Therefore, I installed Aman-Ra via fastboot and flashed a few other roms trying to get past the HTC screen... All of this was without any success.
I was told in a forum by someone much smarter than myself that "the easiest way back to a working phone would be to simply install a new rom like: [ROM 7/11 CONROMV5][4.0.3OTA Sense3.6+DeSense][DeBloated Root Aroma Tweaks][CDMA/GSM]." I was next told that "Conrom will deposit the PH98IMG.zip file on the sd card." This never happened.
.
Thanks to whomever takes pitty on me, in advance. (seriously, Thank you)
Click to expand...
Click to collapse
You have to lock the bootloader first if you want to run the RUU.
First off...you said s-on..
Do you now what firmware you are on? Ginberbread or ICS? If you are on GB you should have installed a SD Card patch as part of your ROM flashing process. If you didn't, that is part of your problem. What happens when you try to flash the boot.img? Do you do it through fastboot? or PH98img file? It sounds like the boot.img is not flashed correctly.
topgun1953 said:
You have to lock the bootloader first if you want to run the RUU.
First off...you said s-on..
Do you now what firmware you are on? Ginberbread or ICS? If you are on GB you should have installed a SD Card patch as part of your ROM flashing process. If you didn't, that is part of your problem. What happens when you try to flash the boot.img? Do you do it through fastboot? or PH98img file? It sounds like the boot.img is not flashed correctly.
Click to expand...
Click to collapse
Ok. First off, wow, what an awesome response. I had rooted the phone through fastboot, but was still on the stock GB. I didn't know about the SD Card Patch. When I try to flash the boot.img, I did that by extracting the boot.img from the rom folder, renaming to PH98.img, and running that through the HBOOT Process (I didn't try it with fastboot). The file would update, begin the "parsing' process, and then stop and go back to the basic HBOOT screen. What would be the correct way to flash the boot.img file? What patch should I have installed relating to the SD Card, and is it too late for that?
brandononeal00 said:
Ok. First off, wow, what an awesome response. I had rooted the phone through fastboot, but was still on the stock GB. I didn't know about the SD Card Patch. When I try to flash the boot.img, I did that by extracting the boot.img from the rom folder, renaming to PH98.img, and running that through the HBOOT Process (I didn't try it with fastboot). The file would update, begin the "parsing' process, and then stop and go back to the basic HBOOT screen. What would be the correct way to flash the boot.img file? What patch should I have installed relating to the SD Card, and is it too late for that?
Click to expand...
Click to collapse
The boot file should be named ph98img.zip CHECK your named file (PH98.img???), the computer should put the .zip on it. Just be sure its not named ph93img.zip.zip!
The other way, if you're comfy with fastboot commands is to put the boot.img in the same directory as fastboot and type "fastboot boot boot.img" . No its not too late to do the SD Card Patch. You can get it here (among other places), I believe its the 'Old Firmware patch" http://www.androidfilehost.com/main/-Support_Files-/SuperChilPil/ . JUst flash in recovery.
The info for your ROM says that the installer would identify the need for the SD card patch, so maybe it did install it? Won't hurt to do it yourself though. Did you consider a more 'basic' ICS rom, like CLeanRom4.5 or the new rooted 3.14.605.12 one?
I'm on Newt's One xXx, ICS sense 4 rom myself.