Coming from Team Perfection UCLE2. Data Wiped. Wiped Cache and Dalvik. Flashed CM9 Unofficial.
Entered CWM. Wiped Cache and Dalvik. Flashed gapps zip. All was fine other than the known issues. Ran the ROM all day.
Saw that there was an update. Wiped Cache and Dalvik 3 times. Flashed Update. Rebooted and was treated to an infinite loop of a double Samsung Logo.
Tried again. Wiped Cache and Dalvik 3 times. Flashed update zip. Same infinite boot loop.
Tried again. This time, wiped data and decided to start clean. Wiped cache and Dalvik. Flashed Update. Same boot loop.
Tried again. Wiped data. Wiped cache and dalvik. Flashed the original CM9 release. Booted fine.
Booted to CWM. Wiped cache and dalvik. Installed gapps. Booted and all was fine.
Booted to CWM. Wiped cache and dalvik. Flashed update. Got same boot loop.
Anyone else have this happen to them? Any ideas?
Thanks
You double posted. Answered in the other thread.
Related
I am on 2.3.5 KI3 rooted with stock firmware, I
Reboot in CWM.
Wipe data/factory reset.
Wipe cache partition.
Wipe Dalvik Cache.
Flash MIUI ROM and my phone keep restarting.
What went wrong?
There's a thread about your problem right above your topic here.
Or just try re-flashing. (Or try flashing it twice in a row)
tried, not working
Hello, I just rooted, and then tried to flash the latest nightly onto my P500H from Koodo.
Now whenever I boot, it's just stuck in the spinning arrow. At first it resets the boot but after 1 or 2 tries the arrow will just get stuck.
I can get into clockworkmod recovery, but there is error message saying: Bad boot message "recovery".
Now, first time I did this I didn't wipe cache partition, but then I did wipe it but same thing happens.
Any ideas?
Did you wipe Data?
Sent from my LG-P500 using xda premium
When you change ROM or kernel, you have to wipe, at least, cache and dalvik cache.
Since I wipe data most of the times, I don't know if Gingerbread 2.3.7 can handle data from 2.3.3, so I would recommend you to try first wiping the 2 caches I mentioned then, if unsuccessful, wipe data.
BTW, this 'bad boot' message on recovery is the same to everyone. I'm no technician on the subject, but you can simply ignore it.
No I only wiped cache partition.
should I also do wipe data/factory reset?
Koraboros said:
No I only wiped cache partition.
should I also do wipe data/factory reset?
Click to expand...
Click to collapse
First you try wiping only cache and dalvik cache. Then, if you're still stuck, you try wiping data.
yuripg1 said:
First you try wiping only cache and dalvik cache. Then, if you're still stuck, you try wiping data.
Click to expand...
Click to collapse
I just wiped all of it and now it boots thanks a lot all.
this is what I do when I flash roms and never have problems, wipe dalivk cache, format cache, wipe data and system in that order...works for me maybe it will work for you
Coming from Team Perfection UCLE2. Data Wiped. Wiped Cache and Dalvik. Flashed CM9 Unofficial.
Entered CWM. Wiped Cache and Dalvik. Flashed gapps zip. All was fine other than the known issues. Ran the ROM all day.
Saw that there was an update. Wiped Cache and Dalvik 3 times. Flashed Update. Rebooted and was treated to an infinite loop of a double Samsung Logo.
Tried again. Wiped Cache and Dalvik 3 times. Flashed update zip. Same infinite boot loop.
Tried again. This time, wiped data and decided to start clean. Wiped cache and Dalvik. Flashed Update. Same boot loop.
Tried again. Wiped data. Wiped cache and dalvik. Flashed the original CM9 release. Booted fine.
Booted to CWM. Wiped cache and dalvik. Installed gapps. Booted and all was fine.
Booted to CWM. Wiped cache and dalvik. Flashed update. Got same boot loop.
Anyone else have this happen to them? Any ideas?
Thanks
Web-head said:
Coming from Team Perfection UCLE2. Data Wiped. Wiped Cache and Dalvik. Flashed CM9 Unofficial.
Entered CWM. Wiped Cache and Dalvik. Flashed gapps zip. All was fine other than the known issues. Ran the ROM all day.
Saw that there was an update. Wiped Cache and Dalvik 3 times. Flashed Update. Rebooted and was treated to an infinite loop of a double Samsung Logo.
Tried again. Wiped Cache and Dalvik 3 times. Flashed update zip. Same infinite boot loop.
Tried again. This time, wiped data and decided to start clean. Wiped cache and Dalvik. Flashed Update. Same boot loop.
Tried again. Wiped data. Wiped cache and dalvik. Flashed the original CM9 release. Booted fine.
Booted to CWM. Wiped cache and dalvik. Installed gapps. Booted and all was fine.
Booted to CWM. Wiped cache and dalvik. Flashed update. Got same boot loop.
Anyone else have this happen to them? Any ideas?
Thanks
Click to expand...
Click to collapse
Follow the instructions I posted in the following thread.
http://forum.xda-developers.com/showthread.php?t=1666947
I had issues coming from other ROMs too.
Oh. And release two can be flashed by itself coming from hybrid. No need to flash release 1 first.
Is there any way to remove the vibration during the AOSP unlock at the moment?
I'm posting this here because I don't have enough posts yet for the actual Liquidsmooth thread in development.
My phone is an XT912 flashed to Page Plus.
I was running the 3/27 spyder (if I remember correctly) version since March with little to no problems. Yesterday, I decided to update the rom to the 0806 spyder version on slot 2 (Safestrap) with PA mini GAPPS. I first did a dirty install over the previous version (read on the thread that some people had no problems doing that).
Things seemed to go fine for a few hours until I tried to delete some files on my sd card and internal storage while it was plugged into my computer. Some folders showed that they were empty (which they weren't), they were fine when I checked in ES File Explorer afterwards. So I rebooted into recovery to wipe the cache and dalvik. Reboot the phone and system ui immediately was stopping, over and over again. I got the phone back into recovery, did some cache and dalvik wipes, reinstalled, wiped again, and rebooted. System ui has stopped.
I booted back into recovery, factory reset slot 2, wiped caches, reinstalled the rom and gapps, another wipe, and rebooted. Profit! The only thing I had to do was futz with some settings to get 3G working again. All was well for the rest of the day and night until I decided to update Viper4Android. Viper rebooted the phone and I was back to the system ui crashing again. Meanwhile, I had rebooted the phone several times to fix the 3G and all was fine. Tried the whole full wipe and reinstall a couple of times (as per one of the posts that said to wipe, reinstall, wipe cache, reboot system, boot to recovery, wipe caches, reinstall, wipe caches, and finally reboot system. No go.
I saw that I'm not the only one this is happening to in the LS thread. Anyone have any ideas? I really can't get in to change any settings because the error starts as soon as the phone is booted. I have to try and get it to reboot in between tapping "ok" on the error and tapping "reboot" and "recovery".
I have created rom slot 1, installed liquidsmooth build 07/06, it is stuck on boot animation i did all like factory reset wipe cache dalvik cache... again i installed by removing data and system partitions and it was installed and started but it got hang... i again went to recovery wipe cache and dalvik again stuck on animation logo.... i tried before CM rom it was working fine...
Device is i think XT912 cdma and gsm.. i am using gsm
Sent from my DROID RAZR using XDA Free mobile app
efuzone said:
I have created rom slot 1, installed liquidsmooth build 07/06, it is stuck on boot animation i did all like factory reset wipe cache dalvik cache... again i installed by removing data and system partitions and it was installed and started but it got hang... i again went to recovery wipe cache and dalvik again stuck on animation logo.... i tried before CM rom it was working fine...
Device is i think XT912 cdma and gsm.. i am using gsm
Sent from my DROID RAZR using XDA Free mobile app
Click to expand...
Click to collapse
Is the phone branded Verizon? If it is, use the Spyder version. If not, UTMS Spyder.
I gave up on the Liquidsmooth rom. I went with AxxionKat and it runs so much better. Not one problem.
pearlheartgtr said:
I'm posting this here because I don't have enough posts yet for the actual Liquidsmooth thread in development.
My phone is an XT912 flashed to Page Plus.
I was running the 3/27 spyder (if I remember correctly) version since March with little to no problems. Yesterday, I decided to update the rom to the 0806 spyder version on slot 2 (Safestrap) with PA mini GAPPS. I first did a dirty install over the previous version (read on the thread that some people had no problems doing that).
Things seemed to go fine for a few hours until I tried to delete some files on my sd card and internal storage while it was plugged into my computer. Some folders showed that they were empty (which they weren't), they were fine when I checked in ES File Explorer afterwards. So I rebooted into recovery to wipe the cache and dalvik. Reboot the phone and system ui immediately was stopping, over and over again. I got the phone back into recovery, did some cache and dalvik wipes, reinstalled, wiped again, and rebooted. System ui has stopped.
I booted back into recovery, factory reset slot 2, wiped caches, reinstalled the rom and gapps, another wipe, and rebooted. Profit! The only thing I had to do was futz with some settings to get 3G working again. All was well for the rest of the day and night until I decided to update Viper4Android. Viper rebooted the phone and I was back to the system ui crashing again. Meanwhile, I had rebooted the phone several times to fix the 3G and all was fine. Tried the whole full wipe and reinstall a couple of times (as per one of the posts that said to wipe, reinstall, wipe cache, reboot system, boot to recovery, wipe caches, reinstall, wipe caches, and finally reboot system. No go.
I saw that I'm not the only one this is happening to in the LS thread. Anyone have any ideas? I really can't get in to change any settings because the error starts as soon as the phone is booted. I have to try and get it to reboot in between tapping "ok" on the error and tapping "reboot" and "recovery".
Click to expand...
Click to collapse
since new nightly build already available (LS-KK-v3.2-2014-08-16), it will be good idea to upgrade, just flashed this morning & everything is fine except moving from dalvik to ART caused bootloop..
I'll stick with AxxionKat. I've had absolutely no issues with it thusfar.
So I'm trying to clean flash a ROM and I want to wipe Cache, Dalvik, System and Data, but TWRP reboots every time and doesn't finish the wipe. And nothing gets wiped.
I tried only a cache + dalvik, but nada. Instant reboot to my home screen.
Tried TWRP 3.0.2.1 and 3.1.0.0 both, same issue.
Ideas?
Solved it. Went back to the May update via fastboot & rerooted + TWRP (latest). Done and dusted.
Mods may close this thread.
Same problem here. Any solution aside from flashing factory image?