Related
hello all,
i have followed entropy512's thread here to get my at&t samsung galaxy s2 rooted with stock settings...i then wanted clockworkmod recovery so i went to this and followed directions to get everything installed...everything was ok and working until a few weeks ago when the 'Check Update' option under Setting stopped working...
basically what happens is when i goto Settings-> Software Update->Check for updates->Hit OK (Check the AT&T server for new software update?) a dialog comes up that says 'Checking for software updates...' and nothing happens...i have left the phone over night with device management app checking for software updates... when this used to work, it took less than 1 minute to check...
finally, the only way for me to stop this is to go and force stop Device Manager under Applications->All, so before i restore the phone to factory, i was wondering if anyone knows what might be the issue here?
Thanks,
FI
fastindy said:
hello all,
i have followed entropy512's thread here to get my at&t samsung galaxy s2 rooted with stock settings...i then wanted clockworkmod recovery so i went to this and followed directions to get everything installed...everything was ok and working until a few weeks ago when the 'Check Update' option under Setting stopped working...
basically what happens is when i goto Settings-> Software Update->Check for updates->Hit OK (Check the AT&T server for new software update?) a dialog comes up that says 'Checking for software updates...' and nothing happens...i have left the phone over night with device management app checking for software updates... when this used to work, it took less than 1 minute to check...
finally, the only way for me to stop this is to go and force stop Device Manager under Applications->All, so before i restore the phone to factory, i was wondering if anyone knows what might be the issue here?
Thanks,
FI
Click to expand...
Click to collapse
The issue is that you're rooted, I wish people would search more
Sent from my SGH-I777 using Tapatalk 2
Nick281051 said:
The issue is that you're rooted, I wish people would search more
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
umm this option was working until a few weeks ago and it randomly stopped so im not sure what rooting has to do with it...furthermore, i did search using various permutations of words around the issue at hand, and i did not find threads that addressed this issue...
fastindy said:
umm this option was working until a few weeks ago and it randomly stopped so im not sure what rooting has to do with it...furthermore, i did search using various permutations of words around the issue at hand, and i did not find threads that addressed this issue...
Click to expand...
Click to collapse
Being rooted you shouldn't even worry about updates, if you had actually searched you would have seen that
Sent from my SGH-I777 using Tapatalk 2
fastindy said:
umm this option was working until a few weeks ago and it randomly stopped so im not sure what rooting has to do with it...furthermore, i did search using various permutations of words around the issue at hand, and i did not find threads that addressed this issue...
Click to expand...
Click to collapse
OTA updates require factory recovery. I'm a bit hazy on the details but I believe CWM, in short, replaces that.
It might also be because you either turned off/uninstalled or inadvertently removed factory bloatware.
BROKKANIC said:
OTA updates require factory recovery. I'm a bit hazy on the details but I believe CWM, in short, replaces that.
It might also be because you either turned off/uninstalled or inadvertently removed factory bloatware.
Click to expand...
Click to collapse
This. Amongst other things. If u insist on trying to eventually upgrade to whatever crap gets pushed out to us yer best bet is to do a full wipe to completely stock firmware.
Nick281051 said:
Being rooted you shouldn't even worry about updates, if you had actually searched you would have seen that
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
once again, the issue is not weather i should worry about updates or not nor did i search for if i should worry about updates...this option was working and something happened that caused it to stop working...and my searches i did was around getting device management to connect to the dm server (which is where the 'Checking for update' got stuck)
BROKKANIC said:
OTA updates require factory recovery. I'm a bit hazy on the details but I believe CWM, in short, replaces that.
It might also be because you either turned off/uninstalled or inadvertently removed factory bloatware.
Click to expand...
Click to collapse
Phalanx7621 said:
This. Amongst other things. If u insist on trying to eventually upgrade to whatever crap gets pushed out to us yer best bet is to do a full wipe to completely stock firmware.
Click to expand...
Click to collapse
both of you seem to be spot on...i didnt realize that removing bloatware which was marked as 'ok to remove' on the document of things to remove safely could have been the issue...initially i had frozen them using titanium...neway i restored the phone using the CWM backup i had and the option started working like expected...thanks for the input
I'm curious...why do you want that option to work?
mattdm said:
I'm curious...why do you want that option to work?
Click to expand...
Click to collapse
so that i can get ICS when AT&T releases the official one... i know there are leaked versions out there, but i dont mind the wait, especially, from the research, i have found people having issues with various features
fastindy said:
so that i can get ICS when AT&T releases the official one... i know there are leaked versions out there, but i dont mind the wait, especially, from the research, i have found people having issues with various features
Click to expand...
Click to collapse
Do you recall all the issues with UCKK6 Gingerbread? That was an AT&T release. The devs had to tear it apart to debug and try to fix it. Any build will have bugs in it. But generally, custom firmwares will have fewer bugs than AT&T firmware.
mattdm said:
Do you recall all the issues with UCKK6 Gingerbread? That was an AT&T release. The devs had to tear it apart to debug and try to fix it. Any build will have bugs in it. But generally, custom firmwares will have fewer bugs than AT&T firmware.
Click to expand...
Click to collapse
unfortunately, i joined the android bandwagon only when i got my samsung galaxy s2, which was a little late in the game, so i have no clue on all the start up issues that people experienced with Gingerbread release...
for now ill need to stick with stock/At&T firmware however ill make the switch to custom firmwares when i stop being lazy and create a USB jig for myself...
fastindy said:
for now ill need to stick with stock/At&T firmware however ill make the switch to custom firmwares when i stop being lazy and create a USB jig for myself...
Click to expand...
Click to collapse
Why would you need a jig? You're already rooted with CWM.
fastindy said:
so that i can get ICS when AT&T releases the official one... i know there are leaked versions out there, but i dont mind the wait, especially, from the research, i have found people having issues with various features
Click to expand...
Click to collapse
I've been running AOKP by Task for a while and have never had a serious issue. The one's I have had were self inflicted and with some reading were quite easy to fix.
BROKKANIC said:
Why would you need a jig? You're already rooted with CWM.
Click to expand...
Click to collapse
if my research that i conducted a while ago is right, then basically samsung has implemented a flash counter which increments each time you flash a custom, non-stock rom...it might also be applied to non-stock kernels/firmwares as well (im not too sure)...so to prevent the flash counter from ever incrementing, ill need to put the phone in download mode using the jig and continue from there...
grubby0 said:
I've been running AOKP by Task for a while and have never had a serious issue. The one's I have had were self inflicted and with some reading were quite easy to fix.
Click to expand...
Click to collapse
alright thanks, ill check it out
fastindy said:
if my research that i conducted a while ago is right, then basically samsung has implemented a flash counter which increments each time you flash a custom, non-stock rom...it might also be applied to non-stock kernels/firmwares as well (im not too sure)...so to prevent the flash counter from ever incrementing, ill need to put the phone in download mode using the jig and continue from there...
alright thanks, ill check it out
Click to expand...
Click to collapse
This is wrong. It is only incremented when you use ODIN to flash nonstock items. CWM has no bearing on flash counters.
Sent from my HTC One X using Tapatalk 2
fastindy said:
if my research that i conducted a while ago is right, then basically samsung has implemented a flash counter which increments each time you flash a custom, non-stock rom...it might also be applied to non-stock kernels/firmwares as well (im not too sure)...so to prevent the flash counter from ever incrementing, ill need to put the phone in download mode using the jig and continue from there...
Click to expand...
Click to collapse
You have some bad information...but I have some good news for you.
The flash counter only counts the number of times you've flashed a custom kernel in download mode via Odin. Using CWM to flash anything can't touch the flash counter. Same goes for Mobile Odin. I've been rooted and flashing for months, I don't have a jig, and my counter is still at zero.
EDIT: Ninja'd by a pirate!
fastindy said:
unfortunately, i joined the android bandwagon only when i got my samsung galaxy s2, which was a little late in the game, so i have no clue on all the start up issues that people experienced with Gingerbread release...
for now ill need to stick with stock/At&T firmware however ill make the switch to custom firmwares when i stop being lazy and create a USB jig for myself...
Click to expand...
Click to collapse
Any GB issues only surfaced if you updated to 2.3.6. 2.3.4 for a "stock" firmware was pretty awesome. I'm on the latest ICS leak from ATT (LD4) and aside from the emmc bug (I'm using a safe kernel so I don't have it) IMHO its more complete then CM9 was. I stopped using CM9 at the end of May and don't miss it at all now.
Sent from my SAMSUNG-SGH-I777 using Tapatalk
alright well i learnt something new today...and now that i have the freedom to flash like a mad man without worrying about flash counter (via CWM), i will surely checkout some of the leaked versions of ICS that you guys are using, and see which one works best for me...thanks for all the new info
fastindy said:
alright well i learnt something new today...and now that i have the freedom to flash like a mad man without worrying about flash counter (via CWM), i will surely checkout some of the leaked versions of ICS that you guys are using, and see which one works best for me...thanks for all the new info
Click to expand...
Click to collapse
I reccomend roms that use i9100 bases as they are usually better, roms like phonebricker, and shostock2 are good, my favorite touchwiz based rom though is serendipity 9. But thats my experiences so try them for yourself (i use aokp as my daily though.)
Sent from my SGH-I777 using Tapatalk 2
Remove Triangle and Reset Counter
http://shetalksandroid.blogspot.com/2012/03/how-to-reset-sgs2-flash-counter-and.html
Please read the above link.
I just did it last night and really works!
Time to hit the Thanks button
EDIT:
This not only makes the meter go back to zero, but also removes the yellow triangle, without the JIG.
Thanks to Chainfire, its free! Just read the above link. (And please "Search" more
Hi guys,
I am getting my S3 tomorrow and wanted to MAKE SURE wether the S3 also has the superbrick risk as the Galaxy Note has ?
Or is it a typical ICS 4.0.3 bug that doesn`t happen on 4.0.4?
That was kernel related.Samsung made a huge f...up.but it was corrected.gs2 suffered from same error.I haven't read anything yet.
Gs3 is lovely a beast
I'm rooted and custom kerneled up with no issues at all.
Sent from my GT-I9300 using xda app-developers app
zodiaxe66 said:
That was kernel related.Samsung made a huge f...up.but it was corrected.gs2 suffered from same error.I haven't read anything yet.
Gs3 is lovely a beast
Click to expand...
Click to collapse
It still isn`t corrected by samsung till now, some devs only diasbled the emmc_cap erase issue in their kernels. But good to know the S3 doesn`t suffer this bug :fingers-crossed:
It was a firmware issue in the SSD-controller (as it usually is with SSD's)
Firmware 0x19 had the issue, Firmware 0x25 does not.
(And no there is no way to upgrade firmware... sadly)
Alright, I'm a noob...(loved the intro video!) and I've spent an hour or so searching for rooting info for my device. Did find a good thread that was over a year old about rooting SGH-i777 with older android versions, but was afraid to follow THOSE directions since mine has newer version (Android 4.0.4). And I find other threads about rooting other versions of GS2...not the AT&T.
So far I've learned NOT to use ROM Manager, and not to look to Galaxy2Root for help...so I guess there's that. I don't want to be stupid here, but can someone direct me to a thread with Rooting instructions for my phone with ICS already on it, and recommended ROMs. I'd like to have more control over my phone and take advantage of JB releases that seem to be out with good reliability. I'm used to doing this sort of thing on computers, but not with Android. Had my phone for about 15 mos....my first Android.
Suggestions?
TIA...
judib said:
Alright, I'm a noob...(loved the intro video!) and I've spent an hour or so searching for rooting info for my device. Did find a good thread that was over a year old about rooting SGH-i777 with older android versions, but was afraid to follow THOSE directions since mine has newer version (Android 4.0.4). And I find other threads about rooting other versions of GS2...not the AT&T.
So far I've learned NOT to use ROM Manager, and not to look to Galaxy2Root for help...so I guess there's that. I don't want to be stupid here, but can someone direct me to a thread with Rooting instructions for my phone with ICS already on it, and recommended ROMs. I'd like to have more control over my phone and take advantage of JB releases that seem to be out with good reliability. I'm used to doing this sort of thing on computers, but not with Android. Had my phone for about 15 mos....my first Android.
Suggestions?
TIA...
Click to expand...
Click to collapse
Use exynos abuse and you're rooted
Sent from my GS4 running CM11 Kandy Kane
122ninjas said:
Use exynos abuse and you're rooted
Sent from my GS4 running CM11 Kandy Kane
Click to expand...
Click to collapse
This is so far easiest thing to do, however be careful, DO NOT, DO NOT,
choose the "one click" patch option which come first, as that will patch
the system and you will NOT be able to root again. and there is NO way
to un-patch. I was not being careful and now trapped.
ExynosAbuse
122ninjas said:
Use exynos abuse and you're rooted
Sent from my GS4 running CM11 Kandy Kane
Click to expand...
Click to collapse
Appreciate the suggesting. Been researching ExynosAbuse, and looks like it could cause camera not to work, and in the compatibility list, though the Galaxy Sii 9100 is listed, the SGH-i777 is not...seems like a concern to me.
judib said:
Appreciate the suggesting. Been researching ExynosAbuse, and looks like it could cause camera not to work, and in the compatibility list, though the Galaxy Sii 9100 is listed, the SGH-i777 is not...seems like a concern to me.
Click to expand...
Click to collapse
It works trust me. Also you're going to flash a rom right after so you should be fine
Sent from my GS4 running CM11 Kandy Kane
I am also a noob when it comes to anything mobile. I got my GS2 last year (first android as well), and I've since updated to 4.0.4. I have also done some research on rooting(after my fiance keeps bugging me about "fixing" our gs2s due to them always turning off) but I was uncertain on what rom to use. I have no experience with phones, and I don't want to do something stupid and break our phones. I know that I am supposed to " use exynos abuse", but that's pretty much all I know/can find without reading every page on the 80 page threads. Are there any suggestions on a stable(ish) rom for us both to use/how easy is it to "use exynos abuse"? (without doing what tyhust did) We are fine with our ICS and I wont venture into the world of Jellybean yet... (maybe once I acquire some more experience)
Thanks in advance, and for the site in general, there is a TON of information on here...
tginouye said:
I am also a noob when it comes to anything mobile. I got my GS2 last year (first android as well), and I've since updated to 4.0.4. I have also done some research on rooting(after my fiance keeps bugging me about "fixing" our gs2s due to them always turning off) but I was uncertain on what rom to use. I have no experience with phones, and I don't want to do something stupid and break our phones. I know that I am supposed to " use exynos abuse", but that's pretty much all I know/can find without reading every page on the 80 page threads. Are there any suggestions on a stable(ish) rom for us both to use/how easy is it to "use exynos abuse"? (without doing what tyhust did) We are fine with our ICS and I wont venture into the world of Jellybean yet... (maybe once I acquire some more experience)
Thanks in advance, and for the site in general, there is a TON of information on here...
Click to expand...
Click to collapse
If you want you can downgrade to 4.0.3
Sent from my GS4 running CM11 Kandy Kane
4.0.4 to 4.0.3 root
122ninjas said:
If you want you can downgrade to 4.0.3
Sent from my GS4 running CM11 Kandy Kane
Click to expand...
Click to collapse
I'm also a noob... so if I want to down grade to 4.0.3 rooted from 4.0.4 stock, should I use ucle5_stock_rooted.tar with Odin?
Is is necessary to wipe since both are ICS?
Thanks!
[email protected] said:
I'm also a noob... so if I want to down grade to 4.0.3 rooted from 4.0.4 stock, should I use ucle5_stock_rooted.tar with Odin?
Is is necessary to wipe since both are ICS?
Thanks!
Click to expand...
Click to collapse
Yes, that should be the tar you use. Make sure it's from this thread. You should be okay without wiping, but if you have problems, I'd suggest flashing 2.3.4 and wiping from recovery once on 2.3.4; reason being, stock ICS kernel may brick your phone if you wipe with it (see linked thread for details on this eMMC superbrick bug).
OP, if you're uncertain about ExynosAbuse, try this method instead. I know it works, I used it myself very recently, albeit I was already on 4.0.3 and had not upgraded.
tginouye said:
I am also a noob when it comes to anything mobile. I got my GS2 last year (first android as well), and I've since updated to 4.0.4. I have also done some research on rooting(after my fiance keeps bugging me about "fixing" our gs2s due to them always turning off) but I was uncertain on what rom to use. I have no experience with phones, and I don't want to do something stupid and break our phones. I know that I am supposed to " use exynos abuse", but that's pretty much all I know/can find without reading every page on the 80 page threads. Are there any suggestions on a stable(ish) rom for us both to use/how easy is it to "use exynos abuse"? (without doing what tyhust did) We are fine with our ICS and I wont venture into the world of Jellybean yet... (maybe once I acquire some more experience)
Thanks in advance, and for the site in general, there is a TON of information on here...
Click to expand...
Click to collapse
This is a good thread.
I had the same issues with 4.0.4 and i found it was a live wallpaper app (water drops) causing my random "power off". Since switching to a different live wall paper, i have had NO random "shut downs".
I still want to root my S2 and this is the best thread i have found that addresses the stock 4.0.4
good luck.
Well, after a week of no shut downs, my phone just shut off. So i guess the live wallpaper was not the issue.
Back to the drawing board
Not to hijack the thread or anything but I'm new to this phone too. I understand the rooting process on ICS what I don't understand is installing a custom recovery and kernel. Why do you have to use a gingerbread kernel and why can you not just use stock? I've always just rooted, installed custom recovery and flashed roms on Verizon phones so installing a custom kernel to achieve custom recovery is foreign to me. I've been reading the stickies but I don't understand this....is it only to avoid the flash counter being tripped? Is there a easier way to install the recovery or am I making this harder than it needs to be? Thanks for any help!
Ryno77 said:
Not to hijack the thread or anything but I'm new to this phone too. I understand the rooting process on ICS what I don't understand is installing a custom recovery and kernel. Why do you have to use a gingerbread kernel and why can you not just use stock? I've always just rooted, installed custom recovery and flashed roms on Verizon phones so installing a custom kernel to achieve custom recovery is foreign to me. I've been reading the stickies but I don't understand this....is it only to avoid the flash counter being tripped? Is there a easier way to install the recovery or am I making this harder than it needs to be? Thanks for any help!
Click to expand...
Click to collapse
Our phone has recovery baked into the kernel. For what reason I don't know but I'm sure its a good one as just flashing recovery is IMO easier.
Thanks. Last question. After installing a gingerbread kernel and the baked in recovery do I need to install a new kernel to flash a jb or ics rom. Sorry for the noob questions. Thanks for your help.
Sent from my SCH-I535 using xda premium
Ryno77 said:
Thanks. Last question. After installing a gingerbread kernel and the baked in recovery do I need to install a new kernel to flash a jb or ics rom. Sorry for the noob questions. Thanks for your help.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Well since every ROM comes with a kernel in it (obviously or it couldn't run) then you just answered your own question bro. Flash away.
Phalanx7621 said:
Well since every ROM comes with a kernel in it (obviously or it couldn't run) then you just answered your own question bro. Flash away.
Click to expand...
Click to collapse
Thanks, that makes things easier. Appreciate the help!
Sent from my SCH-I535 using xda premium
Need more help.... There's so much information since this phone came out its overwhelming and it seems most of it was written for gingerbread. I have the phone rooted, mobile Odin lite installed and I'm confused on which kernel I need to flash. Phone is stock rooted lk3 4.0.4. Thank you!
Sent from my SCH-I535 using xda premium
Ryno77 said:
Need more help.... There's so much information since this phone came out its overwhelming and it seems most of it was written for gingerbread. I have the phone rooted, mobile Odin lite installed and I'm confused on which kernel I need to flash. Phone is stock rooted lk3 4.0.4. Thank you!
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
If you're just trying to get into recovery to flash something then any kernel will do. Since the system won't need to boot up with that kernel installed you're just flashing one to enter recovery.
Phalanx7621 said:
If you're just trying to get into recovery to flash something then any kernel will do. Since the system won't need to boot up with that kernel installed you're just flashing one to enter recovery.
Click to expand...
Click to collapse
So I want to install a gb kernel and recovery only so I can flash a custom rom that comes with kernel and recovery, correct? So before flashing the gb kernel in mobile Odin I should have a rom already downloaded on the sd card so I can immediately flash that? I'm sorry for all the questions this is drastically different from what I'm used to.
Sent from my SCH-I535 using xda premium
Ryno77 said:
So I want to install a gb kernel and recovery only so I can flash a custom rom that comes with kernel and recovery, correct? So before flashing the gb kernel in mobile Odin I should have a rom already downloaded on the sd card so I can immediately flash that? I'm sorry for all the questions this is drastically different from what I'm used to.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Download whatever ROM you want on your phone . Flash a kernel. Reboot into recovery. Profit.
chainfire app just completely damaged my 500$ samsung Galaxy s when I installed the DRIVERS and when I started the reboot so the drivers take effect and it got stock on doot logo. And I got to Recovery menu and I had a old backup but when I was restoring , the phone canceled and switched off and it got stock on the Vibrant logo. No recovery menu, no flashback. Nothing!!! I send the phone to experts and they told me that the phone is total wasted... if you know how to fix it ,tell me how. Its an Gallaxy s vibrant t959 t-mobile
On the list of soported android phones it was my gallaxy s and it was an lie!
If ther eny way to demand the app on playstore.... answer that to...
THANKS
Betfoyet said:
chainfire app just completely damaged my 500$ samsung Galaxy s when I installed the DRIVERS and when I started the reboot so the drivers take effect and it got stock on doot logo. And I got to Recovery menu and I had a old backup but when I was restoring , the phone canceled and switched off and it got stock on the Vibrant logo. No recovery menu, no flashback. Nothing!!! I send the phone to experts and they told me that the phone is total wasted... if you know how to fix it ,tell me how. Its an Gallaxy s vibrant t959 t-mobile
On the list of soported android phones it was my gallaxy s and it was an lie!
If ther eny way to demand the app on playstore.... answer that to...
THANKS
Click to expand...
Click to collapse
http://androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant/
Odin back to stock.
If you're on jb, I bet it doesn't work. If on older rom, try an ics one.
Sent from my Galaxy S III
500$ Samsung Galaxy S eh? If you paid for $500 for your vibrant anytime within the last year or so, then I think you have bigger problems to worry about than a brick.
Also, you really shouldn't house any animosity towards Chainfire. He is an excellent developer who has done so much for the modding community.
As for Chainfire3D, I can tell you from first hand experience that it does, in fact, work for the Vibrant. Please keep in mind that with anything involving modding your device, you accept the risk onto yourself willingly.Chainfire did not force you to do anything, that was your choice - you ought to think about these things before suggesting that he lied in regards to the supported devices, you just did not read the directions properly. How do I know this? Because in the description of the app clearly says, and I quote,
"!! For Froyo and Gingerbread ONLY. NOT COMPATIBLE with Honeycomb/ Ice Cream Sandwhich/Jelly Bean !!"
Guess what CM10 is. That's right, not Froyo or Gingerbread.
I used cf3d with ics perfectly fine, actually.
Sent from my SGH-T999 using xda app-developers app
iKoolkid said:
I used cf3d with ics perfectly fine, actually.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I did too actually... But that isn't the point ^^ when I used chainfire on ICS I had already talked with enough people to know that it worked... but I was still accepting the potential risk that it would not work since chainfire didn't recommend using it on anything above gingerbread. I never used it on jb because I heard stories that it didn't work and could really damage the phone... I did my research and read before doing things, this person just jumped in blind and is blaming a respected dev for his own inability to read.
Sent from my Galaxy S3
Xenoism said:
I did too actually... But that isn't the point ^^ when I used chainfire on ICS I had already talked with enough people to know that it worked... but I was still accepting the potential risk that it would not work since chainfire didn't recommend using it on anything above gingerbread. I never used it on jb because I heard stories that it didn't work and could really damage the phone... I did my research and read before doing things, this person just jumped in blind and is blaming a respected dev for his own inability to read.
Sent from my Galaxy S3
Click to expand...
Click to collapse
True, true. Well maybe my vibe got damaged from the soft brick cf3d used. But yes, from both of us, OP, READ. Search before you post and right now, odin to stock and you have to start from stock, then ics, then jb. Do not restore a backup of a jb rom from an ics, froyo, or anything non jb. Same with other versions, because you can bootloop or soft brick the phone. You're lucky it is just soft bricked.
EDIT: If you have read...
1. Sending the phone to the experts (whom probably have specific knowledge of vibrant rooting and bricks) would've been off your list.
2. You would've known NOT to restore that backup.
And now, as many have said, we or any other devs are not responsible of your flashing even if it should've worked and we are also not responsible for things leading:
Bricks
Dead sd cards
Eu bug
Death of a loved one from brick rage
A hole in your wall from above reason
Thermo-nuclear war
Or catz poppings ups frum ur screenz afdur downroading rom asking fur cheezbergers.
Or a phone repairer finding pr0n on your phone when checking it out. We all know how bad that is.
Sent from my SGH-T999 using xda app-developers app
we have the same situation.. in my case it just boot loop.. i try to restore, but it keep restarting..
so back to stock, GB, and to cm10.1 again.. (do I need to flash GB if my stock rom is eclair before flasing to JB?) good thing to have a titanium backup! my phone usable again after more or less 20mins.
Yes. Flash cm7 first.
Sent from my Galaxy S3
Xenoism said:
Yes. Flash cm7 first.
Sent from my Galaxy S3
Click to expand...
Click to collapse
thanks! now I dont install chainfire anymore..
iKoolkid said:
If you're on jb, I bet it doesn't work. If on older rom, try an ics one.
Sent from my Galaxy S III
Click to expand...
Click to collapse
Noooo my problem is not the Rom... my problem is that my sgs vibrant. It's stock on vibrant logo. First boot picture, not boot loop.
It doesn't open recovery!
You enabled chainfire drivers on jb (first mistake) and then you tried to restore a stock backup of eclair while you were still on jb (second mistake). You can't jump from jb down to stock like that, only from jb to ics and some later versions of gingerbread. What you want to do is boot into download mode and revert to stock the correct way. The moral of the story is when messing with your phone, read, read, read before doing anything ever. You're lucky, because it sounds like your phone will be just fine if you properly Odin back to stock via download mode. However, I warn you...if you Odin wrong, there is a good chance of ruining your phone, so read this time and make sure to do it correctly.
Sent from my Galaxy S3
With the update to 4.1.2, it seems that the Australian version has the bottom icons locked. You can't change them. I've researched this and its only in Australia.... I was pretty pissed off with this, but I thought I could get used to it. Well, I can't.
So being the noob that I am, I thought simply rooting the device would allow me to solve this issue, but it doesn't seem to be that simple.
What I want to do with this phone is to unlock the bottom icons, and get rid of all carrier related stuff (boot animations, apps, etc.). Ideally I want to run pure android 4.1.2, as I'm not a fan of touchwiz, but I tried looking and I couldn't find anything, which is probably down to me being a noob. I wouldn't have a clue how to install it properly either.
So it's a Galaxy S2 I900T
The phone is on Telstra
It has been rooted
It's running stock 4.1.2
If there is anymore info you need to know in order to help me, just let me know and I'll add it.
Thanks in advance!
Well...... You could just run a custom launcher. Search for Nova launcher on the play store. It's the one I use, it's customisable to just about whatever you want.
If you're rooted and do actually want to run stock android instead of just changing the launcher, then look for the index of ROMs in the s2 section. I think GaboWinter is the OP. Look under the AOSP section in there for the stock android ones.
Quick tip, if you do flash a rom you'll have to flash an i9100"t" specific modem or your coverage will be dismal.
Ps. Is it really just the Australian version that can't change the dock icons. How rubbish.
Sent from a galaxy far, far away
d4rkpulse said:
With the update to 4.1.2, it seems that the Australian version has the bottom icons locked. You can't change them. I've researched this and its only in Australia.... I was pretty pissed off with this, but I thought I could get used to it. Well, I can't.
So being the noob that I am, I thought simply rooting the device would allow me to solve this issue, but it doesn't seem to be that simple.
What I want to do with this phone is to unlock the bottom icons, and get rid of all carrier related stuff (boot animations, apps, etc.). Ideally I want to run pure android 4.1.2, as I'm not a fan of touchwiz, but I tried looking and I couldn't find anything, which is probably down to me being a noob. I wouldn't have a clue how to install it properly either.
So it's a Galaxy S2 I900T
The phone is on Telstra
It has been rooted
It's running stock 4.1.2
If there is anymore info you need to know in order to help me, just let me know and I'll add it.
Thanks in advance!
Click to expand...
Click to collapse
if you want pure android, you'll probably be unable to find 4.1 since it's obsolete in aosp and I'd advise you to go with either 4.2 or even 4.3, as 4.2 especially is highly stable.
also, the guy above me is mistaken about modems, the stock i9100 modems work fine on the t variant, just depends on your carrier which ones you want to use.
to install a rom just flash a recovery image from odin (e.g. Dorimanx or PhilZ) and then copy the necessary zips to your sd, boot to recovery, and flash them
remember to back up your data first though
eskriminal said:
if you want pure android, you'll probably be unable to find 4.1 since it's obsolete in aosp and I'd advise you to go with either 4.2 or even 4.3, as 4.2 especially is highly stable.
also, the guy above me is mistaken about modems, the stock i9100 modems work fine on the t variant, just depends on your carrier which ones you want to use.
to install a rom just flash a recovery image from odin (e.g. Dorimanx or PhilZ) and then copy the necessary zips to your sd, boot to recovery, and flash them
remember to back up your data first though
Click to expand...
Click to collapse
Just to clarify.... "the guy above you" owns an i9100 and maintains a friend's i9100T. If you mean the international i9100 modem is able to be flashed on an i9100T, I agree. I've done it. I know you also own "T" variant.
What happens in my case is that the data speeds are so dismal you'd be better off using an encyclopaedia than googling something (literally 2Kb/s in some areas. Flashing a "T" specific modem sees the speed jump to 250-300Kb/s or so in the same spot). I'm guessing by your post you have better success than that with i9100 modems on a "t" variant.
Hopper8 said:
Just to clarify.... "the guy above you" owns an i9100 and maintains a friend's i9100T. If you mean the international i9100 modem is able to be flashed on an i9100T, I agree. I've done it. I know you also own "T" variant.
What happens in my case is that the data speeds are so dismal you'd be better off using an encyclopaedia than googling something (literally 2Kb/s in some areas. Flashing a "T" specific modem sees the speed jump to 250-300Kb/s or so in the same spot). I'm guessing by your post you have better success than that with i9100 modems on a "t" variant.
Click to expand...
Click to collapse
oh, my apologies, hadn't seen anyone with that poor a result
I do indeed get much better results with xxms2 for example
Sent from my GT-I9100 using Tapatalk 2
eskriminal said:
oh, my apologies, hadn't seen anyone with that poor a result
I do indeed get much better results with xxms2 for example
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
No probs mate Odd that you say that, I use XXMS2 /MS3 myself, so naturally tried them on my friend's T variant immediately after rooting. Both modems were dismal and got the 2Kb/s (sometimes hitting 20ishKb/s :0) I mentioned. Now I've got them on DULP4 & no issues at all
Hopper8 said:
No probs mate Odd that you say that, I use XXMS2 /MS3 myself, so naturally tried them on my friend's T variant immediately after rooting. Both modems were dismal and got the 2Kb/s (sometimes hitting 20ishKb/s :0) I mentioned. Now I've got them on DULP4 & no issues at all
Click to expand...
Click to collapse
oh okay, that's odd
I'm testing dvls3 right now, the Vodafone jb modem, which is a t modem, but normally I run xxms2 or nelp3
Sent from my GT-I9100 using Tapatalk 2
eskriminal said:
oh okay, that's odd
I'm testing dvls3 right now, the Vodafone jb modem, which is a t modem, but normally I run xxms2 or nelp3
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Yeah I've flashed dvls3 for them, it wasn't that good. Which is even weirder as they're on vodafone. Eh oh well, not my phone so I can't be constantly testing.