Hi I have Xperia mini ST15i and I have a big problem.
First I enabled the bootloader ---> Fine
Second I root it ---> Fine
I want to install a custom rom ---> Crash
My phone crashed or something like that. When I turned my phone on it is Xperia(bootloader) Logo keep turning on and off. I deleted all the files on phone(removed android(I think)). Now the problem is that I see only Xperia logo nothing happens only that. I can acess boot loader but I don't know what to do next. Any Suggestions ?
blazy123 said:
Hi I have Xperia mini ST15i and I have a big problem.
First I enabled the bootloader ---> Fine
Second I root it ---> Fine
I want to install a custom rom ---> Crash
My phone crashed or something like that. When I turned my phone on it is Xperia(bootloader) Logo keep turning on and off. I deleted all the files on phone(removed android(I think)). Now the problem is that I see only Xperia logo nothing happens only that. I can acess boot loader but I don't know what to do next. Any Suggestions ?
Click to expand...
Click to collapse
download flashtool and install original ftf
flashtool:
http://forum.xda-developers.com/showthread.php?t=1351309
firmware
http://forum.xda-developers.com/showthread.php?t=1568792
Thanks for fast reply. Ill try and I will tell if will work
Unlock bootloader, install custom kernel, install custom ROM via Recovery.
Probably you missed the 2nd step.
Oh and no root is needed to install custom ROM. At all.
How to set the phone to the flash mode ? I have back button on touch.
blazy123 said:
How to set the phone to the flash mode ? I have back button on touch.
Click to expand...
Click to collapse
use volume down..
after finishing this install,
follow someguyfromhell's thread and properly install custom rom/kernel..
blazy123 said:
How to set the phone to the flash mode ? I have back button on touch.
Click to expand...
Click to collapse
Switch off the phone, press volume down button, connect the phone through USB > green led ! Annd you're done
Sent from my SK17i using xda premium
Green LED?! Blue LED must be lit up not Green LED! And also Volume Up key has to be pressed not Volume Down key.
Hold Volume Up key, then connect USB cable; Blue LED has to be lit up.
I recommend you not to flash it again, things will be worse. Give it somewhere to repair.
The Third God said:
Green LED?! Blue LED must be lit up not Green LED! And also Volume Up key has to be pressed not Volume Down key.
Hold Volume Up key, then connect USB cable; Blue LED has to be lit up.
I recommend you not to flash it again, things will be worse. Give it somewhere to repair.
Click to expand...
Click to collapse
It's volume down. Volume up is used to enter fastboot, afaik.
Feanor88 said:
It's volume down. Volume up is used to enter fastboot, afaik.
Click to expand...
Click to collapse
Yes, and flash is possible from this way. I've not heard about flashmode. When Green LED lits up it means the phone is charging (If more than 90%).
Am I right?
blazy123 said:
How to set the phone to the flash mode ? I have back button on touch.
Click to expand...
Click to collapse
The Third God said:
Green LED?! Blue LED must be lit up not Green LED! And also Volume Up key has to be pressed not Volume Down key.
Hold Volume Up key, then connect USB cable; Blue LED has to be lit up.
I recommend you not to flash it again, things will be worse. Give it somewhere to repair.
Click to expand...
Click to collapse
You, sir, are a fail.
Blue LED is fastboot mode, not flashmode. Volume UP is fastboot mode, not flashmode.
EDIT: I see, you posted there between, before me.
Volume Down while turned off and connecting USB cable, is flashmode, where you can install stock firmware to your phone.
Volume Up etc... is fastboot mode, only used to install custom kernels(and unlock bootloader if using official way).
Got it, thank you.
Everyone excuse me for giving erroneous information.
Related
Hi guys,
can i check how to go to fastboot mode in sony ericsson xperia ray? I got instructed to press Volume Up, turn on the phone then connnect the phone using USB cable to computer to get the phone to fastboot mode, but it just doesn't work, the LED doesn't turn to BLUE
I notice one thing that when the phone is one and connected to my computer through USB, when i press the volume up and turn off the phone, the LED then will turn to BLUE.... very weird
Appreciate any help, many thanks
tdth said:
Hi guys,
can i check how to go to fastboot mode in sony ericsson xperia ray? I got instructed to press Volume Up, turn on the phone then connnect the phone using USB cable to computer to get the phone to fastboot mode, but it just doesn't work, the LED doesn't turn to BLUE
I notice one thing that when the phone is one and connected to my computer through USB, when i press the volume up and turn off the phone, the LED then will turn to BLUE.... very weird
Appreciate any help, many thanks
Click to expand...
Click to collapse
1. Disconnect phone from USB
2. Turn off phone (make sure you have at least 50% battery) and wait 30 seconds.
3. Hold the 'Volume UP key' WHILE inserting the USB. --> LED turns blue = fastboot mode.
4. Leave the phone turned off
have you install drivers for fastboot from sony ericssons site? and you dont have to power up the phone press Volume Up and at the same time conect usb cable
wwwong said:
1. Disconnect phone from USB
2. Turn off phone (make sure you have at least 50% battery) and wait 30 seconds.
3. Hold the 'Volume UP key' WHILE inserting the USB. --> LED turns blue = fastboot mode.
4. Leave the phone turned off
Click to expand...
Click to collapse
thanks man! it works now! i manage to root the phone. but one more problem, the sound of ringtone become very soft after the phone is rooted, anyone know how to fix? Thanks
tdth said:
thanks man! it works now! i manage to root the phone. but one more problem, the sound of ringtone become very soft after the phone is rooted, anyone know how to fix? Thanks
Click to expand...
Click to collapse
rooting the phone should not affect the sound settings.
Did you check the sound options?
Xloud turned on?
I cant get my mini pro sk17i into fastboot mode. Tried waiting more than 30 seconds before plugging in usb cable, nothing.
tigger69 said:
I cant get my mini pro sk17i into fastboot mode. Tried waiting more than 30 seconds before plugging in usb cable, nothing.
Click to expand...
Click to collapse
What color does the LED turn?
I don't have SK17i, did you try holding the menu button instead of the volume up button? as they are different models.
wwwong said:
rooting the phone should not affect the sound settings.
Did you check the sound options?
Xloud turned on?
Click to expand...
Click to collapse
Sorry man for the late reply. Yes, Xloud is on, no matter what I did, the sound was still very soft. But after i rebooted the phone, the sound came back to normally now. So strange, anyways, thanks alot
tigger69 said:
I cant get my mini pro sk17i into fastboot mode. Tried waiting more than 30 seconds before plugging in usb cable, nothing.
Click to expand...
Click to collapse
You can try wwwong's suggest, or basically just try all the buttons on your phone. The design may be different between models, but you should be seeing same blue color LED when your phone is is fastboot mode
tdth said:
You can try wwwong's suggest, or basically just try all the buttons on your phone. The design may be different between models, but you should be seeing same blue color LED when your phone is is fastboot mode
Click to expand...
Click to collapse
Thanks for reply, its because my phone was still bootloader locked, i had it done by jinx13 and its all sweet now.
request how to
ummm excuse me can you please tell mehow you rooted your phone...i am in fastboot mode...and fastboot oem unlock ...does not unlock bootloader...
HeartBroken said:
ummm excuse me can you please tell mehow you rooted your phone...i am in fastboot mode...and fastboot oem unlock ...does not unlock bootloader...
Click to expand...
Click to collapse
Here is the solution:
http://forum.xda-developers.com/showthread.php?t=1253112
yes..i was following...that guide....but when i tried to unlock the bootloader ....it is not working unless i am doing something wrong......i typed fastboot oem unlock...and i get failed..
HeartBroken said:
yes..i was following...that guide....but when i tried to unlock the bootloader ....it is not working unless i am doing something wrong......i typed fastboot oem unlock...and i get failed..
Click to expand...
Click to collapse
Here is a very nice video to unlock the bootloader. Step by step guide below it as well. It's for Arc but I followed that when I first unlocked my bootloader for my Ray.
http://www.theandroidsoul.com/how-to-unlock-bootloader-xperia-arc-play-neo-pro/
NOTE: VOLUME UP KEY will enter fastboot mode (Blue LED).
Alright thanks alot...i will try it out and see how it goes....
wwwong said:
What color does the LED turn?
I don't have SK17i, did you try holding the menu button instead of the volume up button? as they are different models.
Click to expand...
Click to collapse
I have SK17i, and can't go to fastboot mode. How can this be? I've charged my phone until it's battery has about 80-90% power. I have tried menu button and many hard-button on my device instead volume up button, but still there's no blue or green LED come :'(
Please help me guys.
krisan47 said:
I have SK17i, and can't go to fastboot mode. How can this be? I've charged my phone until it's battery has about 80-90% power. I have tried menu button and many hard-button on my device instead volume up button, but still there's no blue or green LED come :'(
Please help me guys.
Click to expand...
Click to collapse
Is your phone turned off? Look at the video above. It's the same general rules but different buttons are used.
I am having the issue, obviously our phones are branded... I THINK i might have actually unlocked the bootloader using S1TOOL with TP, but cant manage to get into fastboot... Is there any way to get around this issue anyone? And yes i have done everything right trying to get into fastboot...
Sent from my SK17i using XDA App
Same problem
If you do not get blue led that means fastboot is not enabled I can enable fastboot and then unlock your bootloader for you.
How can I remove the battery and do a "force boot"? The phone is stuck on the recovery screen. I'm unable to restart/boot.
I think the only way it's to remove the battery.
Can someone helpme? the battery appears to be glued to the phone.
Thanks
Update:
I was able to execute the recovery and restore my backup. But after that the phone turned off, now It does not turn on at all.
I'm trying the power + volume up. The phone respond with the first vibration, then the next three, then, nothing happens.
The phone does not connect on the PC. There's no connection. It's not recognized by flashtool. I'm unable to update, change roms, I need to at least connect it.
if I plug the usb cable the red light appears and keep blinking slowly...
Press and hold power button and + volume button until it restarts.
neectron said:
Press and hold power button and + volume button until it restarts.
Click to expand...
Click to collapse
Worked. Thanks
But, there's no way to remove the battery? Impressive. I almost broke the phone trying.
saulob said:
Worked. Thanks
But, there's no way to remove the battery? Impressive. I almost broke the phone trying.
Click to expand...
Click to collapse
You may have to disassemble your phone to remove the battery.I don't recommend it.
My God.
Now it broke for good.
Everything was fine. I was able to make it restart pressing power + volume up.
Then I entered the munjeni recovery again, restored the yesterday backup, the phone booted. And then no show, no image, nothing, nada.
I'm trying the power + volume up. The phone respond with the first vibration, then the next three, then, nothing happens.
Help!!!!
Flash stock ftf.
neectron said:
Flash stock ftf.
Click to expand...
Click to collapse
How can I do it? The phone does not connect on the PC. There's no connection. It's not recognized by flashtool.
Btw, if I plug the usb cable the red light appears and keep blinking slowly...
saulob said:
How can I do it? The phone does not connect on the PC. There's no connection. It's not recognized by flashtool.
Btw, if I plug the usb cable the red light appears and keep blinking slowly...
Click to expand...
Click to collapse
Download ftf for ur phone
Start flashtool
Click thunder icon
Select flashmode
Selecy ftf and let flashtool prepare the files for flashing
It will ask u to connect ur phone
Now attach ur phone to usb keeping the volume down button pressed
This should work
drsanket_xperia_u said:
Download ftf for ur phone
Start flashtool
Click thunder icon
Select flashmode
Selecy ftf and let flashtool prepare the files for flashing
It will ask u to connect ur phone
Now attach ur phone to usb keeping the volume down button pressed
This should work
Click to expand...
Click to collapse
Worked, thanks.
I was able to flash it and boot. Thanks
saulob said:
Worked. Thanks
But, there's no way to remove the battery? Impressive. I almost broke the phone trying.
Click to expand...
Click to collapse
Bro, Sola has non removable battery. You cant remove it.
mirost1 said:
Bro, Sola has non removable battery. You cant remove it.
Click to expand...
Click to collapse
That's new to me. Thanks.
saulob said:
That's new to me. Thanks.
Click to expand...
Click to collapse
No prob buddy, enjoy your phone and be careful what you do. :good:
Hi,
I own a Xperia p, running honami moonwalker v8. Recently i decided to upgrade to CM11. I flashed the CM11 unofficial ROM from this website nightly 2 i think. I did a clean install (erase everything and clear cache) But when i pressed reboot (on cwm) i got a black screen. When you hold the power button it vibrates but screen doesnt turn on, the led goes red for about 2sec and goes off. i tried holding power button and volume up but same result, vibrates and nothing comes up. Even when I make it vibrate 3 times, no result. Im desperate guys please help me i will appreciate your help greatly. And if this means anything, when i installed zip from sd card, it just said installing, and after a few minutes, said install complete. Is this normal? since it didnt show anything in between. PLEASE HELP I WILL TRY DONATE TO WHOEVER FIXES MY PROBLEM.
someguyonearth said:
Hi,
I own a Xperia p, running honami moonwalker v8. Recently i decided to upgrade to CM11. I flashed the CM11 unofficial ROM from this website nightly 2 i think. I did a clean install (erase everything and clear cache) But when i pressed reboot (on cwm) i got a black screen. When you hold the power button it vibrates but screen doesnt turn on, the led goes red for about 2sec and goes off. i tried holding power button and volume up but same result, vibrates and nothing comes up. Even when I make it vibrate 3 times, no result. Im desperate guys please help me i will appreciate your help greatly. And if this means anything, when i installed zip from sd card, it just said installing, and after a few minutes, said install complete. Is this normal? since it didnt show anything in between. PLEASE HELP I WILL TRY DONATE TO WHOEVER FIXES MY PROBLEM.
Click to expand...
Click to collapse
Is your bootloader unlocked?
Can you enter flash/fastboot mode?
ChikeD said:
Is your bootloader unlocked?
Can you enter flash/fastboot mode?
Click to expand...
Click to collapse
how do i enter fastboot? no matter what i try, all i get is vibrations screen doesnt light up.
someguyonearth said:
how do i enter fastboot? no matter what i try, all i get is vibrations screen doesnt light up.
Click to expand...
Click to collapse
You did not answer my first question., therefore I am not going to answer yours
ChikeD said:
You did not answer my first question., therefore I am not going to answer yours
Click to expand...
Click to collapse
Ahahaah sorry i think i forgot about them and yes bootloader unlocked
someguyonearth said:
Ahahaah sorry i think i forgot about them and yes bootloader unlocked
Click to expand...
Click to collapse
1. Open flash tool (don't click anything)
2. Turn the phone off, power + volume up until you feel (1+) 3 vibreations.
3. Press the volume up key while connecting the USB cable, led should lit blue and connected in fastboot should be in the log.
4. Repeat 2, press volume down while connectiong the USB cable for flash mode, check flashtool log
If flash mode stays connected for about 45 seconds you can simply try to flash stock with flash tool.
If fastboot stays connected over 20 seconds you can flash custom stock based kernel and flash moonwalker again, or any other custom rom you have on the phone.
If none works, just leave it turned of, charging for one day then try again.
I've seen more than one report of people that recovered XP by disconnecting the battery, though it didn't work for others.
My phone is bricked and even if i want to flash a ftf at flashtool it doesn't sees my phone :crying::crying: When i connect the wall charger sony logo comes and red led lights then everything closes. And when i hold volume up+power phone vibrates first once then three times. please help
VOL UP+POWER =3 VIBRATION, mean you turn off the phone. No problem.
Step by step.
Turn off the phone. hold volume - and conect to computer. The led turn green?
The same, but with volume+ ¿the led turn blue?
Is very dificult brick totally the phone, we will unbrick, dont worry.
Flamenawer said:
VOL UP+POWER =3 VIBRATION, mean you turn off the phone. No problem.
Step by step.
Turn off the phone. hold volume - and conect to computer. The led turn green?
The same, but with volume+ ¿the led turn blue?
Is very dificult brick totally the phone, we will unbrick, dont worry.
Click to expand...
Click to collapse
Yes if i hold vol up+power blue led comes and if i vol down+power green light comes. At flashtool i selected fastboot and selected flash kernel and flashed recovery.img as kernel. and that happened. i think thats the problem but is there a way to fix it?
Yes!!!!!! You're doing it totally wrong.
Recovery must be sideloaded via adb shell.
You'll need to flash your firmware and then follow the right steps to sideload a new recovery.
Enviado desde mi E2306 mediante Tapatalk
To unbrick you phone the only needed is flash your stock rom,excluding all minus the kernel. This will work and you hold your recovery with the phone working and you will can flash the root zip.
Flamenawer said:
To unbrick you phone the only needed is flash your stock rom,excluding all minus the kernel. This will work and you hold your recovery with the phone working and you will can flash the root zip.
Click to expand...
Click to collapse
But the problem is flashtool doesnt't recognize my phone now. if i can solve this i can open my phone again but how?
Please try put here the log. Uninstall flashtool 9.19,is buged, and install 9.18 and try again. Flashmode and check all except kernel
Flamenawer said:
Please try put here the log. Uninstall flashtool 9.19,is buged, and install 9.18 and try again. Flashmode and check all except kernel
Click to expand...
Click to collapse
i installed 9.18. i connected the phone to the pc when i connect phone to pc the led become green. and i opened the flashtool. in the log it says device connected in flash mode. but when i click the bolt and select the flashmode my device doesnt appears there. and after a while it says device disconnected
vurucumiller said:
i installed 9.18. i connected the phone to the pc when i connect phone to pc the led become green. and i opened the flashtool. in the log it says device connected in flash mode. but when i click the bolt and select the flashmode my device doesnt appears there. and after a while it says device disconnected
Click to expand...
Click to collapse
Change the order, first run flashtool,flashmode,selec the rom,check all except kernel,wait,after flastool say you connect the phone.
Turn the phone off with volume up + power until vibrate 3 times. push and hold volume- and connect the usb to the computer, the flash will start.
Flamenawer said:
Change the order, first run flashtool,flashmode,selec the rom,check all except kernel,wait,after flastool say you connect the phone.
Turn the phone off with volume up + power until vibrate 3 times. push and hold volume- and connect the usb to the computer, the flash will start.
Click to expand...
Click to collapse
Thank ill try when downloaded the ftf
Flamenawer said:
Change the order, first run flashtool,flashmode,selec the rom,check all except kernel,wait,after flastool say you connect the phone.
Turn the phone off with volume up + power until vibrate 3 times. push and hold volume- and connect the usb to the computer, the flash will start.
Click to expand...
Click to collapse
It worked so much thanks you are my lifesaver :good::good:
Im happy for help you, I will have a good day for this. Enjoy
Dont mind me
I need 10 posts to post a picture
i know i'm probably late but when I boot into flashmode and the green light comes on, after a bit it disconnects from my pc and then reconnects, interrupting the process, can anyone help?
JakeMini123 said:
i know i'm probably late but when I boot into flashmode and the green light comes on, after a bit it disconnects from my pc and then reconnects, interrupting the process, can anyone help?
Click to expand...
Click to collapse
Interupting the process? Same hapened to me. Be sure to connect your phone only when everything is ready, so when the flashtool asks you to connect your phone, and not before. Worked for me.
ekin_strops said:
Interupting the process? Same hapened to me. Be sure to connect your phone only when everything is ready, so when the flashtool asks you to connect your phone, and not before. Worked for me.
Click to expand...
Click to collapse
I do connect the phone when everything is ready and flash tool tells me to connect flash tool in flash mode, but it's like a bomb, the green light stays green for about 10 seconds, goes back to red then in 2 seconds back to green so i can never flash anything in time, please help
JakeMini123 said:
I do connect the phone when everything is ready and flash tool tells me to connect flash tool in flash mode, but it's like a bomb, the green light stays green for about 10 seconds, goes back to red then in 2 seconds back to green so i can never flash anything in time, please help
Click to expand...
Click to collapse
It could be also your drivers. Which windows do you have?
What should i do of it goes into the select language part but when i try to select anything it doesn't respond and just restarts again and again. Even if i tried rebooting through twrp it's still the same
Please help.
ekin_strops said:
It could be also your drivers. Which windows do you have?
Click to expand...
Click to collapse
Windows 7 but all the drivers are installled and working fine from the last time I plugged in my xperia.
JakeMini123 said:
Windows 7 but all the drivers are installled and working fine from the last time I plugged in my xperia.
Click to expand...
Click to collapse
Pluged in like file transfer or like flashmode and fastboot mode?
usually when i mess this phone up i am able to use the companion to flash it back to stock. i tryed to flash magisk and now the light flashes when plugged into a power source and the phone does not turn on at all. if i hold volume up while turning on it boots into fastboot mode because i see the blue light and i was able to use flashtool and its fastboot tools to flash system.sin from stock firmware but that has not made a difference. i have tried to get it into download mode(upgrade mode) by holding volume down but it continues to boot loop. if the device is not plugged into power and i hold volume down and power it boots into recovery and i click both safe mode and factory reset but both turn the device off. any ideas?
ths is far from beeig bricked. go into twrp recovery and flash new rom. this should work.
It is just a dead mobile
TjNiko said:
ths is far from beeig bricked. go into twrp recovery and flash new rom. this should work.
Click to expand...
Click to collapse
mine is not doing anything but it only boots into fastboot mode.
my device : Z3v D6708
rooted
no twrp is able to accessed.
dead body which blinks red+green LED when plugged in....and shows a blue light in fastboot.
Inside the SD card / SIM card slot is a small orange or red button, press with a tooth pick or a pin untill you feel vibration and then try to reflash.
a recovery shouzld be aways present at fota my friend.
rockinroller said:
Inside the SD card / SIM card slot is a small orange or red button, press with a tooth pick or a pin untill you feel vibration and then try to reflash.
Click to expand...
Click to collapse
i held the button in the sim card slot until the phone vibrated but what's next? i tried the companion and flashtool but the only thing it lets me do is flash the system, which does not fix my problem still, what is that button?
TjNiko said:
a recovery shouzld be aways present at fota my friend.
Click to expand...
Click to collapse
the only recovery available is the stock one that says power off, safe mode, continue boot, factory reset... none of them do anything....this device does have a locked bootloader, it uses a recovery like many motorola's do... its a software recovery so its gone lol
You should be able to use flash tool to flash the proper ftf file for your device. That is what you are trying to do right?
rockinroller said:
You should be able to use flash tool to flash the proper ftf file for your device. That is what you are trying to do right?
Click to expand...
Click to collapse
yes, every time i try it asks to put the device is upgrade mode, which it can not do at the moment
logan71f100 said:
yes, every time i try it asks to put the device is upgrade mode, which it can not do at the moment
Click to expand...
Click to collapse
So, if you hit the flash button on flashtool, tick the flashmode and after preparing it asks you to power off your phone and plug your USB cable into your computer and then press the volume button "down" while plugging in the USB cable to your phone, It should enter flashmode and start a automated flash. This is not working?
rockinroller said:
So, if you hit the flash button on flashtool, tick the flashmode and after preparing it asks you to power off your phone and plug your USB cable into your computer and then press the volume button "down" while plugging in the USB cable to your phone, It should enter flashmode and start a automated flash. This is not working?
Click to expand...
Click to collapse
nope thats my problem, i only can access flashmode, when plugged in it just bootloops, it only goes into flash mode via the blue light
logan71f100 said:
nope thats my problem, i only can access flashmode, when plugged in it just bootloops, it only goes into flash mode via the blue light
Click to expand...
Click to collapse
I'm not understanding how it is bootlooping. Your phone should be off (power off) when holding down the volume button and plugging in the USB. Is your phone powering on at this point to bootloop? If so you might have hardware problems Is all I can think of.
rockinroller said:
I'm not understanding how it is bootlooping. Your phone should be off (power off) when holding down the volume button and plugging in the USB. Is your phone powering on at this point to bootloop? If so you might have hardware problems Is all I can think of.
Click to expand...
Click to collapse
the phone started bootlooping after flashing that zip. so that rules out hardware, and when i say boot loop i mean lights flash screen stays dark..im trying to figure out if there's a fancy way to fix this through fastboot
depends on wich ftf was used before and bootloader some of them can enter flashmode just by put on the otg cable
It was running 5.1.1 and it boots into fastboot when I hold volume up, but just lights and virbates when holding down for upgrade mode
Same problem. z3v, accidentally flashed a wrong firmware zip via TWRP.
Now if I push the power button, nothing happens.
A long push causes a short vibration and nothing else.
Yellow rest button does not change anything either.
If I connect it to the PC, the following happens: Red led lights up briefly, phone vibrates, green led lights up briefly; whole sequence cycles after that. Now the only thing I can do from there is hold volume up for a couple of seconds, then the phone enters fastboot mode. Blue led lights up continuously. Flashtool sees the phone in Fastboot mode.
However, where to go from here, I cannot see. Any advise?
I had this problem once. It might be your usb cable try a brand new one that rated for data also not just charging. I was trying to root my phone at work and it wouldnt work and when I got home I tried a different usb cable and it worked.,
s300pmu1 said:
Same problem. z3v, accidentally flashed a wrong firmware zip via TWRP.
Now if I push the power button, nothing happens.
A long push causes a short vibration and nothing else.
Yellow rest button does not change anything either.
If I connect it to the PC, the following happens: Red led lights up briefly, phone vibrates, green led lights up briefly; whole sequence cycles after that. Now the only thing I can do from there is hold volume up for a couple of seconds, then the phone enters fastboot mode. Blue led lights up continuously. Flashtool sees the phone in Fastboot mode.
However, where to go from here, I cannot see. Any advise?
Click to expand...
Click to collapse
I am no closer than when I posted this, until there is a bootloader unlock witch in theory can be done through fastboot, we are s.o.l.
logan71f100 said:
I am no closer than when I posted this, until there is a bootloader unlock witch in theory can be done through fastboot, we are s.o.l.
Click to expand...
Click to collapse
aaa,It's very easy.you can use flashtool to flash a new system. but you must be in green light.only it.you also can be flash.sure,if your phone can't get into system,it only loop at"SONY".You touch the power and the volume up and down. keep 7s. then the phone will get into 3E RECOVERY,you chosed power down.and then the phonwill be power off. Now you can flash you phone.
If you phone can't get into green light.you can use the tool Z3X easy tool to save your phone.or it will be a brick.
my phone cant be start.it have became a brick. Good luck
s300pmu1 said:
Same problem. z3v, accidentally flashed a wrong firmware zip via TWRP.
Now if I push the power button, nothing happens.
A long push causes a short vibration and nothing else.
Yellow rest button does not change anything either.
If I connect it to the PC, the following happens: Red led lights up briefly, phone vibrates, green led lights up briefly; whole sequence cycles after that. Now the only thing I can do from there is hold volume up for a couple of seconds, then the phone enters fastboot mode. Blue led lights up continuously. Flashtool sees the phone in Fastboot mode.
However, where to go from here, I cannot see. Any advise?
Click to expand...
Click to collapse
I have same problem if you resolve it please help