Hi i been looking for ics roms for my evo 3d..i have 1.5hboot with unlocked bootloader from the htc dev site..now before we get into it..ill let u guys know what i did
1.I fastboot my evo 3d to recovery using cmd on computer
2.flashed sos ics rom..doing a wipe cache,dalvik cache and factory restore.
3.now i keep getting to a bootloop..or it loads to the lockscreen for a second or two and bootloops again.
4.using twrp recovery by the way.and i dont even see any post for stock kernel 1.5 on the development section..any help please thanks.
tha801gamer said:
Hi i been looking for ics roms for my evo 3d..i have 1.5hboot with unlocked bootloader from the htc dev site..now before we get into it..ill let u guys know what i did
1.I fastboot my evo 3d to recovery using cmd on computer
2.flashed sos ics rom..doing a wipe cache,dalvik cache and factory restore.
3.now i keep getting to a bootloop..or it loads to the lockscreen for a second or two and bootloops again.
4.using twrp recovery by the way.and i dont even see any post for stock kernel 1.5 on the development section..any help please thanks.
Click to expand...
Click to collapse
You need to flash chads rls 1 kernel, from what ive read its the only way to get booted on HBOOT 1.5
can u send me a download liink please
you're honestly better off not flashing that Kernel. you need true S-Off for the real ICS experience. that kernel will make everything laggy/buggy and charging will not work while phone is on, as well as random resets AND 3D/4g will not work.
One of the main reasons I decided to S-off is to use the stock Linux 3 kernel on ICS and EVERYTHING works flawlessly so far! look in the development section for jopounutbear's S-off guide, should be on the first page. took me a couple tries but it's worth it. Truly made me feel like I got an early upgrade and a new phone!
If you S off with that trick, PLEASE read the entire thread. Also, try 4ext as your recovery and see if if you can flash ICS roms with it. While some the majority of people were able to use the wire trick successfully, some people were having lots of issues as well.
Personally, 4ext recovery worked beautifully for me and the wire s off method was a nightmare. Best of luck to you!
Sent from my PG86100 using XDA
Unlocked bootloader is s-off..tried with 3 diffrent recoveries..and same issue..now tried chase kernel and ics does boot up..but 3d camera is broken regardless of which ics Rom I'm using.if u guys have a 1.5 hboot and unlocked bootloader aka s-off tell me what kernel u used that does not break 3d camera..3g or WiFi please
tha801gamer said:
Unlocked bootloader is s-off..tried with 3 diffrent recoveries..and same issue..now tried chase kernel and ics does boot up..but 3d camera is broken regardless of which ics Rom I'm using.if u guys have a 1.5 hboot and unlocked bootloader aka s-off tell me what kernel u used that does not break 3d camera..3g or WiFi please
Click to expand...
Click to collapse
The problem is not your recovery Chads Rls 1 kernel will break 3d but 3g and wifi are good. The only way around it is to downgrade HBOOT then you wont have to flash rls 1, the stock ics kernel is fully functional
tha801gamer said:
Unlocked bootloader is s-off..tried with 3 diffrent recoveries..and same issue..now tried chase kernel and ics does boot up..but 3d camera is broken regardless of which ics Rom I'm using.if u guys have a 1.5 hboot and unlocked bootloader aka s-off tell me what kernel u used that does not break 3d camera..3g or WiFi please
Click to expand...
Click to collapse
An unlocked bootloader is NOT s-off... I HIGHLY recommend you downgrade or to gain the True s-off . Installing an ICS Rom on an unlocked bootloader just means your lazy. It's like eating an Artificial ice cream sandwich. AKA not original, changed. Not as good. I don't know.
Sent from my PG86100 using XDA
I was in the same boat until this afternoon when I decided to downgrade to 1.4...what a breeze with the live CD..give it a go
Sent from my PG86100 using XDA
Wire Trick
I did the wire trick and it worked like a charm. I have s-off on hboot 1.5. I am running InbreDed ICS 5.1 and my 3D is working perfectly.
Related
like the title says... is it done yet? been looking and looking for solutions to that question. i'm already rooted using the htc method. but still looking for a way to get s-off.
check the 3D general section, there are a few threads on it with varying info.
short answer though - no
There has been some effort made towards this front, with little success. Whether you think it's a smoke screen, or not, evil devnull, and his team, attempted this around thanksgiving, and couldn't come up with anything. Not sure if revolutionary is quietly working on something, or if they are waiting for the ICS update, or if they are just done with bootloader unlocking, period (I'm not bashing those guys, but they have been eerily quiet since the bootloader changed to 1.5).
The unlocked, non carrier branded GSM guys have found a way to revert back to an eariler bootloader, using the HTC unlock method, and then performing a similar method to what the thunderbolt/evo shift 4g guys did to allow the Hboot to accept a RUU with an earlier hboot.
I think this doesn't get much attention, because the HTC unlock method allows you can do almost everything you could if you had S-OFF. The only thing missing is being able to flash radios.
At this point it wouldn't make sense for devs to come up with a solution now. Not with ICS around the corner
is there a temp root for hboot 1.5?
Jabawockee said:
At this point it wouldn't make sense for devs to come up with a solution now. Not with ICS around the corner
Click to expand...
Click to collapse
whats ics?
The only reason why i ask is because, ##data# or what ever it is, i found my midi number using an app in market place, but when i tried to adjust my volume. it doesnt want to work. i was wondering if me having s-on and rooted is affecting it in any way.
Ics is ice cream sandwich new android OS hopefully coming to the EVO 3d early 2012.
Sent from my HTC EVO 3D X515m using XDA App
EVO 3D 1.5 100% stock
I want to flash a rom
Olympus Trinity XE Titan HD
I'm a little lost on the whole s off thing
help please
I'm a Motorola DROID x rom flasher
not familiar with HTC
PLEASE HELP.
thanx
treeworx said:
I want to flash a rom
Olympus Trinity XE Titan HD
I'm a little lost on the whole s off thing
help please
I'm a Motorola DROID x rom flasher
not familiar with HTC
PLEASE HELP.
thanx
Click to expand...
Click to collapse
What hboot are you?
Sent from my HTC EVO 3D X515m using XDA App
Edit just saw your whole post have a look here my man this is where to start.
s off
first start here at htc dev and unlock the bootloader and when thats done install a custom recovery like 4ext and then install the su file and now your ready to flash a custom rom now thats done look in the dev section for downgrading your hboot from 1.50 to 1.49.0007 and now your ready for alpharevolutionary.io and when thats done you have s off and your hboot will be 1.49.1107
jslim38 said:
first start here at htc dev and unlock the bootloader and when thats done install a custom recovery like 4ext and then install the su file and now your ready to flash a custom rom now thats done look in the dev section for downgrading your hboot from 1.50 to 1.49.0007 and now your ready for alpharevolutionary.io and when thats done you have s off and your hboot will be 1.49.1107
Click to expand...
Click to collapse
stick with 1.5 if you dont like the downgrade 4ext just got a way to flash kernels from recovery i dont like to brick my phone lol
I keeping getting a bootloop on all ics roms and I tried a kernal that someone recommend but it kills my 3d and i get random reboots . Is there any way to fix this problem and install the ROM with everything working. I'm on hb 1.50 . S- on . Or is there a way to downgrade to hb 1.40 but i don't have a Linux . What's the easiest way ?
Sent from my PG86100 using XDA
I also get the same results!
You can always try 4EXT Recovery with smartflash on. It works for both S-On and S-Off
ccr515 said:
I keeping getting a bootloop on all ics roms and I tried a kernal that someone recommend but it kills my 3d and i get random reboots . Is there any way to fix this problem and install the ROM with everything working. I'm on hb 1.50 . S- on . Or is there a way to downgrade to hb 1.40 but i don't have a Linux . What's the easiest way ?
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
try a superwipe. that fixed mine. Look in the dev forum for it (i think you can find it in the mean rom thread)
You could also downgrade using the instructions in the development thread. Ir doesnt require Linux, it includes a downloadable bootable CD. ITA damn near an automated process minus the brick part. And +1 for 4ext recovery it has features built just for S-on.
My other shooter is an FNAR .308
I already tired a super wipe and my netboot doesn't have a cd drive .
Sent from my PG86100 using XDA
Try using any of Chad.Goodman's ICS Kernel after flashing an ICS ROM
1) DO THIS AT YOUR OWN RISK
2) USE THE RIGHT KERNEL
*credit to chad.goodman* http://forum.xda-developers.com/showthread.php?t=1623646
That the kernal that I already use . It breaks my 3d and i get random reboots
Sent from my PG86100 using XDA
ccr515 said:
That the kernal that I already use . It breaks my 3d and i get random reboots
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
Well what kernel did you use, you could be flashing the wrong one. The other option is to downgrade HBOOT ,, no linux required
http://forum.xda-developers.com/showthread.php?t=1563342
---------- Post added at 08:10 PM ---------- Previous post was at 07:49 PM ----------
I got my ICS ROM to work by flashing RLS1
I doubt downgrading HBOOT will help, he's getting it to work with Chad's kernel. I'm exhibiting the exact same issue with bootloops with the stock kernel(in my case I used the shooter ice kernel to get it to boot) and I'm S-OFF/GSM so I'm pretty sure the issue isn't HBOOT related.
Same here
I have the same issue. I use 4ext with smartflash for recovery. I'm able to flash any GB rom I want, but when I try an ICS rom with a stock kernel I get the boot looping. Is there any other way to make this work? I don't want to dig into the brick/unbrick business if I can help it. I have also tried using Flash Img GUI and fastboot/adb to flash the kernel with the exact same results. Any information on this would help, but a solution would be fantastic!
._. I see what's going on... It's GSM users trying to flash CDMA kernels once again.
Sent from my PG86100 using XDA
What I did was use the new s off for 1.50 and once I got that done I was able to flash any ics Rom I want . Look for it in the development section.
Sent from my PG86100 using XDA
ccr515 said:
What I did was use the new s off for 1.50 and once I got that done I was able to flash any ics Rom I want . Look for it in the development section.
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
+1 to this. The stock Ics kernel does not do well with 1.5 s-on. Since you cannot downgrade to 1.4 s-off, you should try the new 1.5 s-off method. Otherwise you have to use a custom kernel which is not 100% yet.
Sent from my PG86100
coal686 said:
+1 to this. The stock Ics kernel does not do well with 1.5 s-on. Since you cannot downgrade to 1.4 s-off, you should try the new 1.5 s-off method. Otherwise you have to use a custom kernel which is not 100% yet.
Sent from my PG86100
Click to expand...
Click to collapse
Seems like no stock ics kernels like 1.4 hboot period with or without s-off. None would work for me until i updated my hboot to 1.5 and had s-off.
smokin1337 said:
Seems like no stock ics kernels like 1.4 hboot period with or without s-off. None would work for me until i updated my hboot to 1.5 and had s-off.
Click to expand...
Click to collapse
I've been running 1.4 s-off since the downgrade method came available and have never had an issue with any ics ROMs.
Sent from my PG86100
Can someone post a link to the new S-Off method for hboot 1.5?
MakeMeFibonacci said:
Can someone post a link to the new S-Off method for hboot 1.5?
Click to expand...
Click to collapse
Here it is: http://forum.xda-developers.com/showthread.php?t=1585846
I recommend you read all about it first as you have to connect two contact points on your phone using insulated wire, which sounds kind of dangerous.
coal686 said:
Here it is: http://forum.xda-developers.com/showthread.php?t=1585846
I recommend you read all about it first as you have to connect two contact points on your phone using insulated wire, which sounds kind of dangerous.
Click to expand...
Click to collapse
The hboot downgrade seems a lot less scary for sure. In all honesty it was ez and took me less than 30 mins but to each his own
been trying to find out the problem for a week now i have 4ext recovery touch its hboot 1.5 s-on cdma i try to install d3rp ICS ROM threw 4ext recovery and now my phone just go to the htc screen and keep rebooting over and over tell the better go out i try to wipe everything and install new rom and new kernel nothing worked plz help me
Controllen said:
been trying to find out the problem for a week now i have 4ext recovery touch its hboot 1.5 s-on cdma i try to install d3rp ICS ROM threw 4ext recovery and now my phone just go to the htc screen and keep rebooting over and over tell the better go out i try to wipe everything and install new rom and new kernel nothing worked plz help me
Click to expand...
Click to collapse
The only thing that I can really think of is to try to downgrade your hboot. That should fix it. Look in the dev thread for guides.
Edit: have you tried flashing a new ROM/kernel through fastboot? That may work as well. Would be a lot easier then downgrading.
Sent from my Anthrax infected 3D!
rootfreak said:
The only thing that I can really think of is to try to downgrade your hboot. That should fix it. Look in the dev thread for guides.
Sent from my Anthrax infected 3D!
Click to expand...
Click to collapse
Or you could keep your hboot, but make it s-off using the wire trick. It's supposed to be pretty easy.
http://forum.xda-developers.com/showthread.php?t=1585846
Sent from my ICS 3VO with Tapatalk 2
is there any other way i just want my phone to turn back on and i try the stock rom that dint work either
coal686 said:
Or you could keep your hboot, but make it s-off using the wire trick. It's supposed to be pretty easy.
http://forum.xda-developers.com/showthread.php?t=1585846
Sent from my ICS 3VO with Tapatalk 2
Click to expand...
Click to collapse
I wasn't too sure if the wire trick would work. I suggested the downgrade because that actually bricks it and brings it back.
Controllen said:
is there any other way i just want my phone to turn back on and i try the stock rom that dint work either
Click to expand...
Click to collapse
Did you try flashing a new ROM/kernel through fastboot? I'm wondering if it is maybe wondering with the actual flashing itself.
Sent from my Anthrax infected 3D!
HI i'm kinda a noob on this stuff (but learning) ...anyways
I can't seem to be able to get ics on my evo 3d .. it's a sprint cdma version it's got s - off all I want is a kool rom/kernal with the following
i think the problem is that im using gsm roms/kernals (why can't developers put that in their descriptions)
I'm looking for the following features
(CDMA)
I.C.S.
3d camera
over-clocking
battery saver
full beats audio
and some kool eye candy
i tried many roms and kernels but nothing works.. either the phone freezes at the first htc screen .. or it goes to the first htc screen vibrates and then reboots in a loop (i found a few were gsm such as king cobra)
i tried the fastboot method .. clockwork mod...and 4ext.. nothing works ... am i loading the wrong kernal/roms... mabe someone can point me to what im looking for ?
can anyone help me ?
thank you so much
What hboot are you using?
Sent from my PG86100 using Tapatalk 2
Can u give us more details ?
Sent from 3D A.W.E.S.O.M-O
Yes, it would be better if you gave us more details. Such as, what ROM you are using.
ALso, can you create a step by step run down of your flashing process?
Maybe we can see what you did wrong.
The first post has enough information. Sprint is CDMA, King Cobra is GSM. You need a ROM from the CDMA development forum.
Save the Drama for your Mama with Tapatalk 2
yea some were gsm i guess
ddropski said:
HI i'm kinda a noob on this stuff (but learning) ...anyways
I can't seem to be able to get ics on my evo 3d .. it's a sprint cdma version it's got s - off all I want is a kool rom/kernal with the following
i think the problem is that im using gsm roms/kernals (why can't developers put that in their descriptions)
I'm looking for the following features
(CDMA)
I.C.S.
3d camera
over-clocking
battery saver
full beats audio
and some kool eye candy
i tried many roms and kernels but nothing works.. either the phone freezes at the first htc screen .. or it goes to the first htc screen vibrates and then reboots in a loop (i found a few were gsm such as king cobra)
i tried the fastboot method .. clockwork mod...and 4ext.. nothing works ... am i loading the wrong kernal/roms... mabe someone can point me to what im looking for ?
can anyone help me ?
thank you so much
Click to expand...
Click to collapse
-------------------------------------------------------
im on hboot 1.5 (but s off via wire trick)
i was loading into recovery ...then install from zip...pointed to zip and then followed the bouncing ball
i did realize after kingcobra was gsm... bummer anyways
where can i find only cdma stuff ? ..also will any kernel work with any rom?
can anyone recomend a rom kernel that has the features i was looking for?
thanks again
ddropski said:
-------------------------------------------------------
im on hboot 1.5 (but s off via wire trick)
i was loading into recovery ...then install from zip...pointed to zip and then followed the bouncing ball
i did realize after kingcobra was gsm... bummer anyways
where can i find only cdma stuff ? ..also will any kernel work with any rom?
can anyone recomend a rom kernel that has the features i was looking for?
thanks again
Click to expand...
Click to collapse
Go to the EVO 3d cdma development. The gsm and cdma sub forums are split. I'd recommend using the kernel that comes with the Rom. And no, you can't use any kernel with any Rom.
Just find a Rom that you like and flash it. Don't worry about kernels as much.
Sent from my PG86100 using xda app-developers app
If you really want to tweak your system and stuff, you can get the Anthrax kernels (search google). Though you have to sign up to their forum. Also, make sure you read which version the kernel is for. No every kernel cannot work for every version.
can i do this?
kiewee3 said:
Go to the EVO 3d cdma development. The gsm and cdma sub forums are split. I'd recommend using the kernel that comes with the Rom. And no, you can't use any kernel with any Rom.
Just find a Rom that you like and flash it. Don't worry about kernels as much.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
I wanted to put this on but if i have a delema .. http://forum.xda-developers.com/showthread.php?t=1466362
ok its a sprint evo 3d flashed to boost
on that link it says -- 1.2.17.651.5 ROMs need the latest firmware. See freeza's all in one firmware update if you haven't done that already. If you unlocked via the HTC method, you know the drill: you'll have to take the OTA and then re-unlock.--
the thing is most of the features i want are handled by the kernel such as o.c / battery saver / beats / ect... thats the only reason i want to change my kernel
heres the question,,, being i originally did the htc unlockr which made it s-on then did the wire trick and made it s-off will i still need to unlock the phone then relock it ..see here is the problem we found that when we did the wire trick i had to reflash to boost it reset the sprint info (at least that what we think happend) ... and this is not an option right now (the guy that did it for me is at school)
is there a way i can install the freezas firmware..anthrax kernel(which it requires) and the mean rom with out having to reflash boost?
If you are already s-off, then no do not relock. I would really suggest you just start all over. Because if you keep on flashing you could mess it up.
Just take thr ruu for your phone version and start over. You may loose root. But i believe you will still be s-off.
Root again then install recovery, make backups, wipe everything in recovery, then install the rom.
By the way you will have to use joeykrim's flashimageGUI app to flash the kernel before the rom IF you are on1.5 hboot. If you are 1.4 hboot disregard.
Dporfann said:
If you are already s-off, then no do not relock. I would really suggest you just start all over. Because if you keep on flashing you could mess it up.
Just take thr ruu for your phone version and start over. You may loose root. But i believe you will still be s-off.
Root again then install recovery, make backups, wipe everything in recovery, then install the rom.
By the way you will have to use joeykrim's flashimageGUI app to flash the kernel before the rom IF you are on1.5 hboot. If you are 1.4 hboot disregard.
Click to expand...
Click to collapse
thats the part i think if load the stock ruu it resets it back to sprint ...also i am on 1.5 but i thought that was the point of going s-off so i i dont have to use programs like flash image gui... (although i have tried it)
i a little confused
ddropski said:
thats the part i think if load the stock ruu it resets it back to sprint ...also i am on 1.5 but i thought that was the point of going s-off so i i dont have to use programs like flash image gui... (although i have tried it)
i a little confused
Click to expand...
Click to collapse
Like I said, I think ou should start over. Take the 2.17 ruu.exe. I also suggest you downgrade via the "bricking" method and then root using revolutionary.
If you don't want to do that then, root with htc method. And do not install the boost firmware! Install recovery, make backup, use flashimageGUI or 4ext. And install rom.
You have to do this on 1.5
If you downgraded to 1.4 then you can disregard flashimageGUI
I think your problem is that you flashed the boost firmware. You could have kept the original meanrom and nothing would have happened.
Just start over.
I'm still a noob when it comes to Android. My 3D had a 1.30 hboot, and I rooted it with Revolutionary the day it was released back last summer.
So I had been using the ICS CM9 rom that was first released several months ago (actually my phone was sitting in my drawer as I was waiting on an official ICS update)
Anyway I flashed PG86IMG.zip from Virus
http://forum.xda-developers.com/showthread.php?p=29613228#post29613228
and followed all the steps. Everything went smoothly.
Now I wanted to return to CM9 or any other non-sense rom so I could use a bluetooth wiimote since I heard HTC sense roms don't support the proper BTstack.
Every time I flash any of those roms, they end in endless boot loops. CM9 Devil Toast, CM10, none of them work. I do superwipe and everything. The only roms that work are sense based. How do I fix this?
My Hboot is now 1.58. It says ***LOCKED*** with "SHOOTER XC SHIP S-OFF RL". I heard this doesn't mean anything because I'm still rooted with S-Off, but why can't I flash those roms anymore? I want to play some GBA with the WiiMote.
I can't seem to find exact info on my problem. I know I should ask in Virus' thread, but his roms are working fine.
Thanks.
I'd say just run a 2.17 firmware zip through fastboot
Sent from my PG86100 using xda premium
Datguy_n_Disguy said:
I'd say just run a 2.17 firmware zip through fastboot
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
You should be able to just flash a different Hboot. There is a thread in the Dev section with the 1.40 and the Eng 1.04 Hboots. Just flash and you can go back.
From what I understand you cannot run AOSP or older Sense builds on the newer Hboot currently.