Hey
In Android, when you plug in via USB your phone to your PC, in the notification bar, a option is given to show the device as a USB drive. I dont get that option any more and I dont see anywhere to enable it or select it.
How can I do this?
This might be stupid question, but did you try to restart phone and pc?
aagames said:
This might be stupid question, but did you try to restart phone and pc?
Click to expand...
Click to collapse
Yes.
Maybe there is a app for Android to launch itself into storage mode, thinking a USB cable is connected to it and at the same time a PC? Its just strange.
Ive also tried with other USB cables still nothing.
Do you have fast charged enabled? If yes, disable it
Accidentally sent from my Google Nexus S
you must enable usb debugging or there could be an error with your usb...
melvinchng said:
Do you have fast charged enabled? If yes, disable it
Accidentally sent from my Google Nexus S
Click to expand...
Click to collapse
How do I know if I have fast charge enabled?
Also in recovery, as you know, there is a option to enable USB storage which also makes your phone's SD card be viewable in explorer. That doesnt work either.
Im starting to think it is a kernel problem.
Try Flashing the new Clock Work Mod Recovery, I found it in the One X forums and I tried it it worked and it might work for you let me just find it
(sorry theres a double check the 2nd page)
Sorry if I reposted
Sorry if there is a double reply I can't find the thread so I just use the back arrows on the browser to get back to this thread soo...
Here is the recovery.img from my computer
----->I DO NOT TAKE RESPONSIBILITY OF YOUR PHONE <----
----->Please Press the THANKS BUTTON if I helped
Good Luck
The Android Manual said:
Sorry if there is a double reply I can't find the thread so I just use the back arrows on the browser to get back to this thread soo...
Here is the recovery.img from my computer
----->I DO NOT TAKE RESPONSIBILITY OF YOUR PHONE <----
----->Please Press the THANKS BUTTON if I helped
Good Luck
Click to expand...
Click to collapse
Um.........Im obviously not going to try some random recovery set by a user and much less without a technical explaination.
Why doesnt this work? And what is that "fast charge" someone mentioned?
If someone doesnt mind helping me solve this problem, thank you very much.
Spencer.Guangco you must enable usb debugging or there could be an error with your usb...
Click to expand...
Click to collapse
@riahc3
Why don't you try what he said, just do this steps.
go to Settings > Applications > Development > find the USB Debugging Mode over there and check whether it is enabled or not.
USB Debugging Mode can be used to copy data between your computer and your device, install applications on your device without notification.
and of course, without java installed on your PC Desktop or Laptop, connectivity between your android phone and PC would create some problems, be sure to update your Java if you have already installed.
And to clarify the issue of fast charger mode. I think it's not related to your problem since you cannot understand what fast charger mode and how to do it in the first place, am I right?. There's a procedure on how to do a fast charger mod and if you want a proof, visit this link which can be found here in XDA, Charger mod, how to USB fast charge.
Hope it helps
luckywiseguy said:
@riahc3
Why don't you try what he said, just do this steps.
go to Settings > Applications > Development > find the USB Debugging Mode over there and check whether it is enabled or not.
USB Debugging Mode can be used to copy data between your computer and your device, install applications on your device without notification.
and of course, without java installed on your PC Desktop or Laptop, connectivity between your android phone and PC would create some problems, be sure to update your Java if you have already installed.
And to clarify the issue of fast charger mode. I think it's not related to your problem since you cannot understand what fast charger mode and how to do it in the first place, am I right?. There's a procedure on how to do a fast charger mod and if you want a proof, visit this link which can be found here in XDA, Charger mod, how to USB fast charge.
Hope it helps
Click to expand...
Click to collapse
Usb debuggin is enabled. I've tried plugging it enabled/disabled and nothing. And again this also happens in recovery.
More tips? Thank you anyways
Anyone else? I mean the only thing left is to reflash but the strange thing is it not woring in recovery
More suggestions???
Related
First of all I am a big-Noob.
My LG optimus one P-500 is in stock ROM.
My Problem :-
Earlier USB was working fine but now
when I plug it in to the AC Adapter it charges OK but when I plug it in to the USB after that it only charges and neither the Phone nor the PC recognizes the USB data connection.
I have tried
1) Power off the phone and remove the battery for a couple of seconds and power it back up, after doing this the USB does not connects. Not even recognised by PC or Phone
2) Device manager also does not detect anything.
3) Uninstalled modem driver and reinstalled USB driver but no result.
Please help
Thanks in advance
Cheers
Request again
Dear mates
I have really very high respect for the forum so please help me out.
ThanQ
Cheers
This happened to me twice before. I had to send it to LG's Service Center because I saw no way of fixing it since the computer wouldnt know what to do with it...
If you have custom recovery installed, you might be able to flash an original ROM over it. This wasn't an option for me before and it seemed like the only way to fix my phone. Don't take my word for it though. Try for the service center first if possible...
Did you try going to settings and choosing Mass Storage only?
Also, change the USB port of the cable with which you connect your phone (plug the cable in another one - try this with all ports if it doesn't work the first time)...
Before going to any service, do a backup and Factory Reset your device, then try again...
Oh, and disable LG modem from Device Manager after installing the USB drivers.
USB not getting detected
I am trying in choosing Mass Storage only.
"Also, change the USB port of the cable with which you connect your phone (plug the cable in another one - try this with all ports if it doesn't work the first time)..."
Not helping either
Disabled LG modem from Device Manager after installing the USB drivers.
No use
Before going to any service, do a backup and Factory Reset your device, then try again...
I will try this definitely but going to service means 3-4 days without phone . really very scary .
thanks mate
anymore help
Okay , I did face this problem before and I did about hundreds of advice from my friends but this is the step that works.
I discovered that this happens when you do crazy **** on your sd card with applications such as titanium backup or root explorer. Curiousity kills the cat.
Firstly you need:
1) Usb Card Reader [Of course which suits with your sdcard]
2) Computer
Firstly, you want to dismount the sdcard from your phone and mount it to the USB Card Reader.
Connect the Usb Card Reader to your Computer.
You should be able to gain entry to the sdcard
Next,clear everything on your sd card then place your sd card on your phone back and do a factory reset. If you don't do a factory reset then you must do it all over again if you decided to connect the usb to the phone. After reset-ing the phone , try to connect your phone to the computer. Congratulations.
Note: This works for me but it doesn't meant that it will work for you , but I think that this is worth the try.
sanagg1 said:
First of all I am a big-Noob.
My LG optimus one P-500 is in stock ROM.
My Problem :-
Earlier USB was working fine but now
when I plug it in to the AC Adapter it charges OK but when I plug it in to the USB after that it only charges and neither the Phone nor the PC recognizes the USB data connection.
I have tried
1) Power off the phone and remove the battery for a couple of seconds and power it back up, after doing this the USB does not connects. Not even recognised by PC or Phone
2) Device manager also does not detect anything.
3) Uninstalled modem driver and reinstalled USB driver but no result.
Please help
Thanks in advance
Cheers
Click to expand...
Click to collapse
Ur phone charges through usb that means your phone usb port/usb cable is ok. Do this :
Uninstall the drivers, restart the pc and try connecting the phone again. Remember not to install the drivers again. Win7 save a dump of old drivers and i think it will auto detect it. Post results here.
Sent from my LG-P500 using Tapatalk
Got exactly the same situation with USB(on different PCs) and also Emergency mode on every reboot(taking battery out for about an hour helps).
Did SD wipe though not sure about factory reset afterwards, gotta try it one more time...
mansirawat said:
"Ur phone charges through usb that means your phone usb port/usb cable is ok."
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
I would argue that, I have a samsung omnia that outright refuses to do anything besides charge over usb.
Brainy142 said:
I would argue that, I have a samsung omnia that outright refuses to do anything besides charge over usb.
Click to expand...
Click to collapse
Is it android ?
Lets wait for op reply.
Sent from my LG-P500 using Tapatalk
mansirawat said:
Ur phone charges through usb that means your phone usb port/usb cable is ok. Do this :
Uninstall the drivers, restart the pc and try connecting the phone again. Remember not to install the drivers again. Win7 save a dump of old drivers and i think it will auto detect it. Post results here.
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
Unfortunately, it did not help either.
any ways,thanks for pointer
Cheers
mansirawat said:
Uninstall the drivers, restart the pc and try connecting the phone again. Remember not to install the drivers again. Win7 save a dump of old drivers and i think it will auto detect it. Post results here.
Click to expand...
Click to collapse
I have tried uninstalling driver and just plugging in with USB but still neither PC nor phone detects USB connection.
I have tried it on Win7, Win Vista and WinXP.
respected mates please help me.
I am on transfer in June so don't want to take chance with Service centre as of Now.
Cheers
Are you sure you are having the latest driver?
try this:
Code:
csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
install it,
(you may have to choose language from the last tab, 1st or 2nd option)
and choose P500 from "driver installation"
I didnt experience this issue but if i cant help im sorry.
Miasmic said:
Are you sure you are having the latest driver?
try this:
Code:
csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
install it,
(you may have to choose language from the last tab, 1st or 2nd option)
and choose P500 from "driver installation"
I didnt experience this issue but if i cant help im sorry.
Click to expand...
Click to collapse
I could not find P500.
the names were associated with carrier like T-mobile, verizone etc.
any suggestion
I know i'm stupid
cheers
sanagg1 said:
I could not find P500.
the names were associated with carrier like T-mobile, verizone etc.
any suggestion
I know i'm stupid
cheers
Click to expand...
Click to collapse
Try another cable.
Sent from my LG-P500 using XDA App
None of the above methods worked on mine as well - same results on different cable(pc/os).
Will try to flash rooted original firmware via custom recovery, del custome recovery and root and send it to service.
i Just flashed my g tablet to Vegan-tab ginger edition and i was going to transfer files over to the tablet via USB from my pc, all i see on the tablet is "USB debugging connected, select to disable it" On my pc i see the drive show up but it prompts me to insert a disk.
When i click on USB debugging to see these other options, the only ones i see are
USB debugging
USB debugging notify
Stay awake
Allow mock locations
Stop app via long-press
Device hostname
can someone please help?
There should also be a USB Media selection that says select to enable USB file transfers.
Select that, too.
I have the same problem too. I was told in another posting that its a vegan tab software issue. If you ever find a fix, please let me know.
Same problem
I have the same problem. My computer recognizes that something has been plugged in, but doesn't recognize what it is. I would definetly like to fix this. Vegan ginger is great, so I will stay with it either way, but haveing the USB work would be even better. Thanks all you programmers for all the hard work.
You need pershoot kernel for ginger to enable usb.
goodintentions said:
You need pershoot kernel for ginger to enable usb.
Click to expand...
Click to collapse
Do you have a link to the specific kernel for this? Thanks in advance.
KENNYMULE said:
Do you have a link to the specific kernel for this? Thanks in advance.
Click to expand...
Click to collapse
Try here http://droidbasement.com/db-blog/?p=2207
Please take the time to read this:I flashed and installed SkyRaider a couple days ago and I noticed when I connected to my PC that my PC started recognizing it as HTC Phone (or something of the like). This apparently really screwed up my drivers on my computer because I installed iKReaM and now I can't even get into disk drive mode...it doesn't ask what connection type I want anymore and my computer just says "USB Device Not Recognized". I tried uninstalling the HTC Driver Installer but that didn't do anything either. This is not good as I ran into the same problem when trying to root my friends Samsung Fascinate and never go the problem fixed. Anyways...my phone worked perfect before and SkyRaider evidently messed it up pretty good...to say I am pissed is an understatement. If you need any more info please let me know.
Please link me to the newest HTC Drivers as well, it would be much appreciated.
If no one can help I will have to do a clean install of windows 7, which is not an enjoyable experience
https://market.android.com/details?id=com.dooblou.WiFiFileExplorer&hl=en
You will have to buy the pro version to push files. That would be your easy solution.
You can always use recovery to get into usb mode as well.
Stratejaket said:
https://market.android.com/details?id=com.dooblou.WiFiFileExplorer&hl=en
You will have to buy the pro version to push files. That would be your easy solution.
You can always use recovery to get into usb mode as well.
Click to expand...
Click to collapse
I can't get into recovery anymore using usb mode, computer doesn't recognize the device so no way to use it...and I would use the Wifi app instead of using a usb cable? I see what you mean by easy but I don't wanna avoid the problem...I have a brand new $1600 Alienware so I would like to have it fixed lol...if need be I may just have to do a clean install
I know this isn't your actual problem but just for the record, AirDroid lets you control your phone and push files to it with a web browser and wifi for free.
(I tried linking it but I guess I haven't made enough posts to include links yet, easy to find by searching the Market tho)
You might check under Settings/ Connect to PC to make sure the Ask Me option is turned on.
Sent from my ADR6400L using Tapatalk
When you plug your phone into your computer does the phone start to charge?
If so restart the computer and plug the phone into a different usb port. Check device manager and see if you have it listed in your usb devices, or you have an ! over a usb. Most of the time this ends up being an issue with the computer it is being hooked to, not the phone. The computer isn't launching the driver correctly to show the phone that it is connected to a computer, and not just a wall outlet.
Even when I've had this issue, which is random I have still been able to use recovery usb to manage it. Make sure when your in recovery you mount the sdcard before enabling the usb.
GTP7510MAYXAR wont connect to pc, usb not recognized. In odin mode it does the same. Pc doesnt have bluetooth either.
When inserting a usb female connector it does say usb connection, but the usb flash drives did not show. Tablet
also charges healthy.
I want to root this, install clockwork recovery, flash rom to jb 4.2.2, but without the help of that pc i am stuck on 4.04 stock.
Bought this from someone so no previous exp with this device.
Any way to root and install recovery with tablet alone itself?
Thank you for your time:laugh:
Maybe I'm underestimating your experience, but you can try this to see whether USB storage works:
Go to Settings -> Storage -> the 3-lined menu button at the top right corner -> USB PC connection -> Media device (MTP)
I wish this can help. if you have further questions we are here to help at any time.
Good luck!
arashtarafar said:
Maybe I'm underestimating your experience, but you can try this to see whether USB storage works:
Go to Settings -> Storage -> the 3-lined menu button at the top right corner -> USB PC connection -> Media device (MTP)
I wish this can help. if you have further questions we are here to help at any time.
Good luck!
Click to expand...
Click to collapse
Ofcourse i tried it hihi:highfive:
But i am starting to think its faulty hardware as no one has any idea about the issue
I actually bought mine in the exact same condition. It would not work on usb no matter what i did also a few other 'bugs' I thought it was a faulty cable but it turned out to be corrupted files on the rom.
Long story short, reatoring the tab to factory via ODIN fixed everything.
Follow this thread for help
http://forum.xda-developers.com/showthread.php?t=2142268
TheDoctah said:
I actually bought mine in the exact same condition. It would not work on usb no matter what i did also a few other 'bugs' I thought it was a faulty cable but it turned out to be corrupted files on the rom.
Long story short, reatoring the tab to factory via ODIN fixed everything.
Follow this thread for help
http://forum.xda-developers.com/showthread.php?t=2142268
Click to expand...
Click to collapse
:crying:
My tablet gets the same "not recognized" error in odin mode ;( when connecting it to pc. :crying:
Please someone help a fellow owner of the best tablet to make it even better, is there any way for me to install a custom rom without usb?
teun3sixty said:
Please someone help a fellow owner of the best tablet to make it even better, is there any way for me to install a custom rom without usb?
Click to expand...
Click to collapse
Well, you could use mobile ODIN or Rom Manager. However, you need to be able to pull the backup you're going to make before you install that custom rom off of the device. Using USB is a simple way of doing that. It's possible to get it off over WiFi, but you really should fix the USB.
Hello Everyone
I am putting my problem in this general section with the hope to ask for help to more people compared to the Mate 8 section where not a lot of people go these days.
Since a while I am not able to connect my phone to a laptop. If I connect it to a laptop it just starts charging but nothing else. I have tried everything like:
Changing Cables (tried more than 5. I dont have the original anymore)
Changing Laptops
Changing the USB port of the phone itself
Updating Drivers
Installing Hisuite (current version 5.0.3.300)
Restore phone to factory settings
Complete formatting
Updating to the latest version (Current version Nxt-L29C185B582)
Changing the USB debugging/ Connection (MTP/PTP/etc)
And what not
The problem is, it doesnt get detected on the computer and cant connect to adb as well. All I want is to unlock bootloader and Install TWRP and Magisk. I have the unlock bootloader code but no way to unlock it since I cant connect.
Can anyone help me in fixing this stupid problem ? It is getting frustrating. If there is a hardware issue, what part needs to be replaced? Any help would be appreciated.
USB connection icon on top of the phone when connecting laptop
gandotratushar said:
Hello Everyone
I am putting my problem in this general section with the hope to ask for help to more people compared to the Mate 8 section where not a lot of people go these days.
Since a while I am not able to connect my phone to a laptop. If I connect it to a laptop it just starts charging but nothing else. I have tried everything like:
Changing Cables (tried more than 5. I dont have the original anymore)
Changing Laptops
Changing the USB port of the phone itself
Updating Drivers
Installing Hisuite (current version 5.0.3.300)
Restore phone to factory settings
Complete formatting
Updating to the latest version (Current version Nxt-L29C185B582)
Changing the USB debugging/ Connection (MTP/PTP/etc)
And what not
The problem is, it doesnt get detected on the computer and cant connect to adb as well. All I want is to unlock bootloader and Install TWRP and Magisk. I have the unlock bootloader code but no way to unlock it since I cant connect.
Can anyone help me in fixing this stupid problem ? It is getting frustrating. If there is a hardware issue, what part needs to be replaced? Any help would be appreciated.
Click to expand...
Click to collapse
Go to the Settings of your phone---> About phone----> Build number tap this 7 to 8 times-----> Developers option is enabled----> back to settings ----> go to developers option ----> enable USB debugging.
When you connect to the phone to the laptop you will find an icon on top of the screen of your phone with a USB mark "like a trident", pull down the top menu and find the USB connection tab, (like changing the sim card if you intend to call through a specific card) e.g quoted, double tap the USB tab to obtain options ---> 3 options 1) MTP 2)PTP 3) USB charging only----> select the first option MTP (Media transfer protocol).
Now connect to the laptop you will find exclamation marks in the device manager of your laptop. Load the appropriate drivers on your computer and viola! this will establish connection with the device you are having. if you find difficulty in installing USB drivers, search the thread "Attempt to load USB drivers for Micromax E484 on win XP is a fiasco" in this forum. You will find the solution for USB drivers
http://forum.xda-developers.com/android/help/attempt-to-load-usb-drivers-micromax-t3696432
Regards,
689alza
Thanks for your reply
Go to the Settings of your phone---> About phone----> Build number tap this 7 to 8 times-----> Developers option is enabled----> back to settings ----> go to developers option ----> enable USB debugging.
Already Tried
When you connect to the phone to the laptop you will find an icon on top of the screen of your phone with a USB mark "like a trident", pull down the top menu and find the USB connection tab, (like changing the sim card if you intend to call through a specific card) e.g quoted, double tap the USB tab to obtain options ---> 3 options 1) MTP 2)PTP 3) USB charging only----> select the first option MTP (Media transfer protocol).
Already tried too
Now connect to the laptop you will find exclamation marks in the device manager of your laptop. Load the appropriate drivers on your computer and viola! this will establish connection with the device you are having. if you find difficulty in installing USB drivers, search the thread "Loading USB drivers in Win XP turned to be a fiasco"
Nope. Doesnt happen
When i connect with the laptop, my laptop doesnt even make that sound for the connection.
What is the model and OS version of the device and the model and OS version of the computer? According to your symptoms your phone appears to be in option 3) USB charging only. The phone will not be detected by your laptop or the like(Computer) in this mode. Merely remains in a charging state. Are you certain the option 1) is picked MTP? If the phone is not detected there appears to be some hardware failure, try another USB port to connect to the laptop. if all else fail a service technician will pinpoint the fault. It may perhaps be a data transmission failure of the devices port to the interior of the phone. This is merely an assumption.
best remedy would be a service technician.
Hope this helps
689alza
alza689 said:
What is the model and OS version of the device and the model and OS version of the computer? According to your symptoms your phone appears to be in option 3) USB charging only. The phone will not be detected by your laptop or the like(Computer) in this mode. Merely remains in a charging state. Are you certain the option 1) is picked MTP? If the phone is not detected there appears to be some hardware failure, try another USB port to connect to the laptop. if all else fail a service technician will pinpoint the fault. It may perhaps be a data transmission failure of the devices port to the interior of the phone. This is merely an assumption.
best remedy would be a service technician.
Hope this helps
689alza
Click to expand...
Click to collapse
I have tried changing the usb charging only to all possible options but it still is the same. I tested in Linux and when I connect the phone nothing shows up in the logs. It's like it's not being connected . I have tried changing the usb port itself from the phone but it remained the same.. can the flex cable be a problem ? Mate series was never launched in India so I don't have any help from the service centre. I have to order the spare from eBay.com so there is no qualified technician who can help.. that's why I have to fix it myself somehow..
Thank you for your help
gandotratushar said:
I have tried changing the usb charging only to all possible options but it still is the same. I tested in Linux and when I connect the phone nothing shows up in the logs. It's like it's not being connected . I have tried changing the usb port itself from the phone but it remained the same.. can the flex cable be a problem ? Mate series was never launched in India so I don't have any help from the service centre. I have to order the spare from eBay.com so there is no qualified technician who can help.. that's why I have to fix it myself somehow..
Thank you for your help
Click to expand...
Click to collapse
I quite doubt the cable will be the culprit as your device charges the battery while in an established connection with the laptop. As you state the phone USB port was replaced, it could be a some glitch before the USB port in the device where there is an interruption in the data transmission signal that cannot be detected by your laptop.
Could you boot your device, computer and connect the two and take a snapshot of your device (whilst connected to the laptop) and paste the same in the forum?
Perhaps visual cue could be better at dealing such mishaps.
alza689 said:
I quite doubt the cable will be the culprit as your device charges the battery while in an established connection with the laptop. As you state the phone USB port was replaced, it could be a some glitch before the USB port in the device where there is an interruption in the data transmission signal that cannot be detected by your laptop.
Could you boot your device, computer and connect the two and take a snapshot of your device (whilst connected to the laptop) and paste the same in the forum?
Perhaps visual cue could be better at dealing such mishaps.
Click to expand...
Click to collapse
Yes of course. It is connected to a computer now. You can see it getting charged but that's about it
alza689 said:
I quite doubt the cable will be the culprit as your device charges the battery while in an established connection with the laptop. As you state the phone USB port was replaced, it could be a some glitch before the USB port in the device where there is an interruption in the data transmission signal that cannot be detected by your laptop.
Could you boot your device, computer and connect the two and take a snapshot of your device (whilst connected to the laptop) and paste the same in the forum?
Perhaps visual cue could be better at dealing such mishaps.
Click to expand...
Click to collapse
Can it be something because of some wrong flash ? This problem has survived through 2 versions and 1 system upgrade through firmware finder .. and a complete format
USB trident is not seen on the device
gandotratushar said:
Yes of course. It is connected to a computer now. You can see it getting charged but that's about it
Click to expand...
Click to collapse
Your USB trident icon is not indicated on the device, If you were to receive power from the laptop the trident would be displayed on top of the screen, even for charging the battery. The power source for your device appears to from other than the laptop.
I have pasted my device after connecting to the computer and the second icon from the top left is the USB Trident icon indicating connection with my laptop. Have taken the snapshot of the menu that I was describing .
I strongly feel you have a hardware failure rather than a simple fix and would require the help of a technician (ordinary if professional is unavailable). Am skeptic you could mend that on your own unless you are proficient in electronics. This mishap is not due to flashing wrongly too, unless you have changed the stock ROM with some custom ROM which has some bug that affect the USB alone.
Take the assistance of a technician whether professional or less is my counsel
Thank you
alza689 said:
Your USB trident icon is not indicated on the device, If you were to receive power from the laptop the trident would be displayed on top of the screen, even for charging the battery. The power source for your device appears to from other than the laptop.
I have pasted my device after connecting to the computer and the second icon from the top left is the USB Trident icon indicating connection with my laptop. Have taken the snapshot of the menu that I was describing .
I strongly feel you have a hardware failure rather than a simple fix and would require the help of a technician (ordinary if professional is unavailable). Am skeptic you could mend that on your own unless you are proficient in electronics. This mishap is not due to flashing wrongly too, unless you have changed the stock ROM with some custom ROM which has some bug that affect the USB alone.
Take the assistance of a technician whether professional or less is my counsel
Thank you
Click to expand...
Click to collapse
I did flash a different rom .. but then back to stock recently.
I can do basic electronics but the if the problem lies in Mobo .. then nothing can be done .. as I don't have the spares available in India. But I would hate to lose this phone as it was a perfect fit for my needs
gandotratushar said:
I did flash a different rom .. but then back to stock recently.
Then the question of wrong flash or ROM issue does not arise
I can do basic electronics but the if the problem lies in Mobo .. then nothing can be done .. as I don't have the spares available in India.
If you do not have spares is best left alone rather than tampering with it and rendering the device useless if any untoward incidents tends to occur.
But I would hate to lose this phone as it was a perfect fit for my needs
Send to the vendor directly if you have warranty for the device stating its complaints or request your relative or friends who live in the area where you bought your phone to hand it to the vendor or service technician and bear its expenses
Click to expand...
Click to collapse
Thank you
alza689 said:
Thank you
Click to expand...
Click to collapse
Is there a way to unlock bootloader somehow without connecting to usb ? That would also solve the purpose.. I want to root it for some of the things to work and with the latest upgrade to latest version I lost the unlocked bootloader and root.. if somehow I can unlock and root .. I should be fine without the usb connection to computer.. but I have ran out of ways
Does Kingroot work for you?
I mean did u try it or u just want magisk?
If u didn't, kingroot may be able to root ur device and unlock ur bootloader, then u can flash TWRP using rasher.. & make a backup BTW...
After that, try using the adb sideload in TWRP to test ur connection with ur computer.
TWRP for ur device : (q.gs/DxuAH)
There is a way to unlock bootloader without USB via developers option.
Go to settings-----> About phone-----> Build number ( Tap this option around 7 or 8 times) till developers option is enabled------> go back to settings-----> developers option-----> OEM unlock option (Enable this option) to unlock the bootloader.
Xeedius said:
Does Kingroot work for you?
I mean did u try it or u just want magisk?
If u didn't, kingroot may be able to root ur device and unlock ur bootloader, then u can flash TWRP using rasher.. & make a backup BTW...
After that, try using the adb sideload in TWRP to test ur connection with ur computer.
TWRP for ur device : (q.gs/DxuAH)
Click to expand...
Click to collapse
Thank you for the advice.. I hadn't tried it earlier but after your suggestion I did.. kingroot says I need to unlock my bootloader to root it.. so I am back to square one..
alza689 said:
There is a way to unlock bootloader without USB via developers option.
Go to settings-----> About phone-----> Build number ( Tap this option around 7 or 8 times) till developers option is enabled------> go back to settings-----> developers option-----> OEM unlock option (Enable this option) to unlock the bootloader.
Click to expand...
Click to collapse
This gives me an frp unlock and not a phone unlock.. still not able to root
There is no FRP unlock.
gandotratushar said:
This gives me an frp unlock and not a phone unlock.. still not able to root
Click to expand...
Click to collapse
There is no FRP unlock, to circumvent FRP you need to factory reset or flash your firmware. The above quotation was to unlock the boot loader as you cannot access through your computer. Your sole option to unlock boot loader was through the above directions.
Moreover, King root application never ask for boot loader to be unlocked. Although a little unstable this is the initial program to root any device. Once you have the TWRP setup then you could switch to Super Su etc. according to your preference.
Could you paste your developers option snapshot here...
Regards,
689alza
gays
me too have this problem ( only usb port for charge and other option's not work)
and i want back to orignal system
and i want know how download orignal system (from Huawei web site) to my phone
can any one help me how
or how can fixed this problem
and i have other problem
when i try to boot to TWRP phone stay on " your device is booting now..."
so any one can help me how reinstall TWRP without PC or why this problem ??
TWRP is not installed duly on your phone
Hello! Omar Dahy,
OmarDahy said:
gays
me too have this problem ( only usb port for charge and other option's not work)
Connect your phone to your computer or laptop, a trident icon appears on your phone notification area, pull down the notifications and identify the notice as USB connection, tap twice you willk be provided with options.
and i want back to orignal system
and i want know how download orignal system (from Huawei web site) to my phone
My phone was Micromax and I am not aware of your phone's firmware, try and google or search the Xda developers forum under your phones model number for the original firmware.
can any one help me how
or how can fixed this problem
and i have other problem
when i try to boot to TWRP phone stay on " your device is booting now..."
Your phone has not installed TWRP duly, therefore it boots straight to the system. Search again in this XDA forum, with your pnone name and model number to obtain instructions
so any one can help me how reinstall TWRP without PC or why this problem ??
Click to expand...
Click to collapse