Looks like Otterbox just needs a phone to put in their just posted case.
Can't wait!
Saw one at Radio Shack 2 days ago and bought it. Waiting for the phone to go along with it. Me thinks it will be very soon, brand new Rezounds retail are down $100.00 on Ebay from just a couple of days ago.
cman6453 said:
Looks like Otterbox just needs a phone to put in their just posted case.
Click to expand...
Click to collapse
I don't know anything about otterbox and haven't heard of it before. Is it a hard shell case that does something special? Seems a little pricy.
Senryo said:
I don't know anything about otterbox and haven't heard of it before. Is it a hard shell case that does something special? Seems a little pricy.
Click to expand...
Click to collapse
It's a hard case with a rubber skin around it. It's super durable. Highly recommended.
Sent from my vivow using Tapatalk 2
I picked up the Commuter with it today and its awesome! Fits perfect and doesn't add much bulk.
Sent from my ADR6410LVW using Tapatalk 2
Do you guys find it to big? I've been looking at this or the Ballistic case but they both seem to make the phone in to a brick.
The Commuter seems like the perfect size to me. I'll take some picture in a bit so you can see.
Sent from my ADR6410LVW using Tapatalk 2
Here are some pictures of it, and ones comparing it to my mom's Razr with a Case-mate case on it in my previous post.
I've commented on the otterbox defender series case before. I've got one on my Dinc. Yes the defender series will bulk it up, with the outer hardshell and clip but guess it depends on your lifestyle. I'm a mechanic so I need something that can withstand getting dropped or inadvertantly laid on, etc.
The defender is like a brick **** house, it just doesn't get any better protection wise. The nice thing about it, is if I take the phone all the way out to just it's core size without all the protection, and wipe it down, you wouldn't know this phone was not brand new, it's mint condition, thanks to the otterbox, and it has been dropped on the otterbox at least 5 times.
The commuter series would be a lot smaller profile if that's what you are looking for....
I'm glad to see OB has their act together on this and released a case for it, it actually took them a while to release one for the og Dinc..
ohredwood said:
I've commented on the otterbox defender series case before. I've got one on my Dinc. Yes the defender series will bulk it up, with the outer hardshell and clip but guess it depends on your lifestyle. I'm a mechanic so I need something that can withstand getting dropped or inadvertantly laid on, etc.
The defender is like a brick **** house, it just doesn't get any better protection wise. The nice thing about it, is if I take the phone all the way out to just it's core size without all the protection, and wipe it down, you wouldn't know this phone was not brand new, it's mint condition, thanks to the otterbox, and it has been dropped on the otterbox at least 5 times.
The commuter series would be a lot smaller profile if that's what you are looking for....
I'm glad to see OB has their act together on this and released a case for it, it actually took them a while to release one for the og Dinc..
Click to expand...
Click to collapse
I fele ya ottebox is the best.
.. u dropped ur inc4g 5 times already
I bought the Commuter, and the fit was horrible. The hard plastic outer shell didn't securely clamp to the soft rubber inner cover, and that inner cover did not fit the phone securely. The port covers didn't lay flat either. I bought an incipio silicrylic case and it fits much better.
Wow, I really like that Incipio case, holy cow. You have anything that can take pictures of it on the phone? Would really like to see some real world pics. How soft is the inside layer? Would it be ok sliding in and out of a pocket or would it "grab" or rip over time?
It doesn't look any different than from the website. Slides into and out of pockets just fine, and I don't think it will wear over time. The included screen protector is way better than the one OtterBox packages with their case, it covers the entire front glass panel.
A62335 said:
I bought the Commuter, and the fit was horrible. The hard plastic outer shell didn't securely clamp to the soft rubber inner cover, and that inner cover did not fit the phone securely. The port covers didn't lay flat either. I bought an incipio silicrylic case and it fits much better.
Click to expand...
Click to collapse
I agree! I just got my Otterbox case in on Saturday and the fit is really bad. I have a hard time pushing the power and volume button, the rubber over top of the front camera does not lay flat, the bottom end below the soft keys does not hug the phone(kind of protrudes out), the screen protector does not cover the whole screen, and the headphones port cover does fit very well into the hard shell.
I'm very disappointed in this case and will try and return it.
I'm not a big fan of otterbox because it's too big for me. :silly: But, if I don't find that many cases, I might have to buy this one. haha
i just got me an otter box defender, and its awesome, fits perfect, it makes the phone.has it's own screen cover too.
---------- Post added at 08:02 PM ---------- Previous post was at 07:54 PM ----------
hieu2ueih said:
I agree! I just got my Otterbox case in on Saturday and the fit is really bad. I have a hard time pushing the power and volume button, the rubber over top of the front camera does not lay flat, the bottom end below the soft keys does not hug the phone(kind of protrudes out), the screen protector does not cover the whole screen, and the headphones port cover does fit very well into the hard shell.
I'm very disappointed in this case and will try and return it.
Click to expand...
Click to collapse
boy they must have given you the wrong one, mine is nothing like you discribe
I haven't used an otterbox on the Inc4, but we've got a fleet of iPhones for our salesmen at work. Every single one is in an otterbox Defender series, and trust me when i say our salesmen are extremely hard on phones. These cases have probably saved us hundreds of dollars no question.
The point of my post however is if you get one that doesn't fit quite right though i would ask for a replacement. When i was setting up all the phones and putting them into there cases i did run into a few that just didn't sit right. Looked like a manufacturing defect to me, but i was able to get replacements. That might be the issue your running into.
Void4ever
Edit: The Defender series WILL absolutely bulk up the phone though, but if you need the protection you'll find none better. I have no exp with the Commuters personally, but from the pics the size looks good.
andybones said:
I fele ya ottebox is the best.
.. u dropped ur inc4g 5 times already
Click to expand...
Click to collapse
Naaa bud, I don't have the Inc4g yet, I've got my original Dinc sealed up in the defender series.
To the latest posters, as I mentioned in my post earlier as well, I have no experience with the commuter series OB but I did have two defender series OB's that cracked a small portion of the clip/case. I think it's a weak link in the design of the case and the snapping/unsnapping of the phone in/out of the case over time that caused this. But OB themselves, have been absolutely stellar to deal with, they looked up my purchase date, no questions, shipped out new cases to me each time.
I'd call em up tell em, and maybe they sent the wrong case, maybe you got a design flaw on yours, who knows but if some of the folks using the commuter case have posted awesome fit and look, that just don't jibe with what your reaction is to your case...
I went to radio shack to try out the otterbox commuter and the defender.
The commuter was unimpressive. The fit was loose even after much working of the acrylic over the silicone to have it get into the right place. The top part that hangs over the front facing camera is kind of flappy and I can see a lot of dust getting in there. The screen protector doesn't cover up under the loose area either. The bottom part of the case barely hangs on to the bottom of the phone, not tight at all.
The defender was completely opposite, the defender was a great fit. It felt sturdy, durable and overall just comfortable (if you like the additional bulk added). The screen protector was flush with the screen and responsive. Not nearly as nice feeling as a skinomi, but still nice.
I know this is an older post but........ I just got the defender series and it really doesn't bulk up the phone that much - frankly it is pretty small in you hand without a case. Even with this case on it still fits into the side pocket of a pair of carhartts. It is worth the money.
Related
Just wanted to see if anyone has any of the Case Mate series cases for the Evo 3d? I was thinking about getting the Tough case, but from a video review on youtube, the case apparently has a random port on the bottom...
http://www.youtube.com/watch?v=mskLfmXEh0Y
Where I have found them online:
http://www.mobilecityonline.com/wireless/store/productdetail.asp?productid=28094#section10
http://www.wirelessground.com/htc-e...3d-case-mate-tough-case-black&channelid=FROOG
Currently have the Defender, but DAMN its bulky
I will never buy another case mate again
Sent from my Nexus S 4G using XDA App
mattfmartin said:
I will never buy another case mate again
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
Please fill me in lol
i have a casemate and i have been using this badboy since sept! i use this on my evo 4g over my seidio rugged! and i am rough on my ph and dropping it and this casemate is tough! also slides in and out of a pant pocket real good!
Sent from my PC36100 using XDA Premium App
HTCRALEIGHFAN said:
i have a casemate and i have been using this badboy since sept! i use this on my evo 4g over my seidio rugged! and i am rough on my ph and dropping it and this casemate is tough! also slides in and out of a pant pocket real good!
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Maybe I will have to reconsider, I would still like to see some more people weigh in. I have the OB Defender right now, and its excellent protection wise just a bit bulky...
The convert from seidio/BB is pretty awesome two good cases plus a nice clip. This is until I can get the ballistic case
Sent from my PG86100 using Tapatalk
I have the Tough Case, just delivered today. It's similar in design to the Otterbox Commuter -- a thin silicone base layer covers the entire phone, while a hard plastic shell snaps around the back, sides and corners.
Pros: The fit is absolutely perfect. The silicone layer over the buttons is just the right thickness -- the power, volume and camera buttons are all covered, but their function is not impeded in the slightest. I was particularly delighted by how well the camera button works, no interference with function or sensitivity at all.
Around the front edge, the silicone layer rises a few millimeters above the screen, so you can comfortably place the phone face down without worrying about scratching the glass. Similarly, the camera lenses and flash are deeply recessed on the back, with perfectly sized openings around each (which, IMO, is how the lenses should've been on the phone itself). You can drag your phone across concrete with no worries, if that's the kind of thing you're into.
The hard plastic outer layer has a smooth matte coating that makes it feel more like silicone than hard plastic, giving it a very nice feel in the hand. It's also covered with a raised, textured pattern, making the phone very unlikely to slip out of your hand. By contrast, the Otterbox Commuter I briefly had on my Hero had a plastic outer shell that was slick and shiny, and the phone slipped out of my hand twice within the two days I left it on (which is why I used it only briefly).
Cons: My only real complaints are aesthetic. I really like the slim, refined look of this phone, and the grippy, textured, matte black surface of this case, while very protective and easy to hang on to, is a tad inelegant, giving the phone more of an industrial feel. It also adds a bit of bulk, which was immediately noticeable when I pocketed the phone with it on (although I will say it's positively svelte compared to some of the other cases I've seen pictured on this forum). The phone does also feel noticeably heavier with this case on.
In response to the OP, the case does have a couple of mysterious ports at the bottom. One lines up with the slot you use to pry the battery cover off, while a smaller one lines up with a tiny hole just to the left of the other (edit: duh! that's the mike, thanks minieod). I don't know why those are there, but they don't do any harm.
Overall, I'd say thumbs up. If you like the basic design of Otterbox cases but want something slimmer than the Defender and easier to hold than the Commuter, this is probably your best choice.
I have the casemate "barely there" case on my OG Evo. I have been using it since shortly after launch and it has been just the right amount of protection without adding a lot of bulk. I keep my phone in a pocket with nothing else so that case helps with day to day wear and more importantly it makes it so the camera glass doesn't touch the table when the phone is laying on its back.
I am thinking of picking up an Evo 3d for my girlfriend in order to replace her dying palm Pre but she is pretty rough on phones. She drops hers a lot and throws it in her purse with keys and change and stuff. The thought of getting her a "glass slab" style phone frightens me. I will probably pick up a barely-there case for the Evo 3d if I get it for her. It's weird that they don't list them on their site but that mobilecity site seems to have them in a few colors for $15. That's a good price IMO and my last one came with a free screen protector. Hopefully that will be enough to protect her phone.
I guess I can also cancel the insurance on my Evo and move it to her 3d if I get it since my account is due for upgrade and hers won't be for two years if i get her the 3d.
po96od said:
The case does have a couple of mysterious ports at the bottom. One lines up with the slot you use to pry the battery cover off, while a smaller one lines up with a tiny hole just to the left of the other. I don't know why those are there, but they don't do any harm.
Click to expand...
Click to collapse
that "mysterious hole" on the left of the phone you'll want to remain uncovered --- unless you'd rather not talk to anyone ---- thats the microphone
other than that i totally agree with you on the case - i got it at the sprint store and i LOVE it
i had the TPU case from the user who posted on here earlier in june (forgot your username sorry!) and sold them on tpu-cases.com or something like that... it was 8 bucks shipped, and great quality for tpu
but i tried this on when i was waiting at the store picking up my moms evo3d for her bday gift.... and decided to get the case-mate tough, and give her my tpu one
the casemate tough is sleek....i dont agree with po96 on the "inelegant" , because its pretty similar to the style of the battery cover on the 3d....
i like it a lot, and it feels very solid and protected....
i used to use the otterbox commuter on my evo4g and loved it, but i really hated the new design for the 3d....
minieod said:
that "mysterious hole" on the left of the phone you'll want to remain uncovered --- unless you'd rather not talk to anyone ---- thats the microphone
other than that i totally agree with you on the case - i got it at the sprint store and i LOVE it
i had the TPU case from the user who posted on here earlier in june (forgot your username sorry!) and sold them on tpu-cases.com or something like that... it was 8 bucks shipped, and great quality for tpu
but i tried this on when i was waiting at the store picking up my moms evo3d for her bday gift.... and decided to get the case-mate tough, and give her my tpu one
the casemate tough is sleek....i dont agree with po96 on the "inelegant" , because its pretty similar to the style of the battery cover on the 3d....
i like it a lot, and it feels very solid and protected....
i used to use the otterbox commuter on my evo4g and loved it, but i really hated the new design for the 3d....
Click to expand...
Click to collapse
PMed you, guess you might not have noticed. Anyways has anyone else seen these in a Sprint Store? I didn't see one at mine but maybe he was at a non-corporate store?
#Winning# said:
PMed you, guess you might not have noticed. Anyways has anyone else seen these in a Sprint Store? I didn't see one at mine but maybe he was at a non-corporate store?
Click to expand...
Click to collapse
hey sorry, my PM notifications are not working i guess
i am going to take some pics of mine now and post here
(note: these pics were taken on an Evo3D)
http://imgur.com/a/cCdel
neodorian said:
I guess I can also cancel the insurance on my Evo and move it to her 3d if I get it since my account is due for upgrade and hers won't be for two years if i get her the 3d.
Click to expand...
Click to collapse
get the 3d on her plan...swap the 3d to your number, and your evo to hers....at that time you both have two new activated phones...both are now eligible for the TEP
also, now you will have a 3d
minieod, nice pics. I was meaning to post some, but you were way more completist about it than I would've been.
The mystery hole at the bottom is for a lanyard.
i wish it would come with a holster
Phreddo said:
The mystery hole at the bottom is for a lanyard.
Click to expand...
Click to collapse
lol
no...its the microphone...when your mouth makes noise, that noise goes into that hole
po96od said:
I have the Tough Case, just delivered today. It's similar in design to the Otterbox Commuter -- a thin silicone base layer covers the entire phone, while a hard plastic shell snaps around the back, sides and corners.
Pros: The fit is absolutely perfect. The silicone layer over the buttons is just the right thickness -- the power, volume and camera buttons are all covered, but their function is not impeded in the slightest. I was particularly delighted by how well the camera button works, since the TPU case I was initially using basically disabled it.
Around the front edge, the silicone layer rises a few millimeters above the screen, so you can comfortably place the phone face down without worrying about scratching the glass. Similarly, the camera lenses and flash are deeply recessed on the back, with perfectly sized openings around each (which, IMO, is how the lenses should've been on the phone itself). You can drag your phone across concrete with no worries, if that's the kind of thing you're into.
The hard plastic outer layer has a smooth matte coating that makes it feel more like silicone than hard plastic, giving it a very nice feel in the hand. It's also covered with a raised, textured pattern, making the phone very unlikely to slip out of your hand. By contrast, the Otterbox Commuter I briefly had on my Hero had a plastic outer shell that was slick and shiny, and the phone slipped out of my hand twice within the two days I left it on (which is why I used it only briefly).
Cons: My only real complaints are aesthetic. I really like the slim, refined look of this phone, and the grippy, textured, matte black surface of this case, while very protective and easy to hang on to, is a tad inelegant, giving the phone more of an industrial feel. It also adds a bit of bulk, which was immediately noticeable when I pocketed the phone with it on (although I will say it's positively svelte compared to some of the other cases I've seen pictured on this forum). The phone does also feel noticeably heavier with this case on.
In response to the OP, the case does have a couple of mysterious ports at the bottom. One lines up with the slot you use to pry the battery cover off, while a smaller one lines up with a tiny hole just to the left of the other (edit: duh! that's the mike, thanks minieod). I don't know why those are there, but they don't do any harm.
Overall, I'd say thumbs up. If you like the basic design of Otterbox cases but want something slimmer than the Defender and easier to hold than the Commuter, this is probably your best choice.
Click to expand...
Click to collapse
So sounds like you like it better than the Otterbox. I am currently using the Commuter and love the feel of it (didn't feel slippery to me, has a nice texture) but hate the gap at the top. I am getting a new silicone layer from Otterbox to see if that one fits better. I think I might order the Tough Case as well and compare the two. Overall would you say its thinner than the Commuter?
I wish I could find the Tough Case in stores to give it a test before purchasing. I hate having to buy online and pay return costs for shipping if I don't like it but I guess that's what I'll have to do.
*update* Just ordered a Tough Case. There is a 20% off code for their online store: CM06-SP20. The online store has free shipping to US addresses and didn't charge me tax, so $28 total for the tough case (originally $35). Not bad! If I don't like it I can just pay return shipping. I might just keep it for a backup.
mrazzino said:
So sounds like you like it better than the Otterbox. I am currently using the Commuter and love the feel of it (didn't feel slippery to me, has a nice texture) but hate the gap at the top. I am getting a new silicone layer from Otterbox to see if that one fits better. I think I might order the Tough Case as well and compare the two. Overall would you say its thinner than the Commuter?
I wish I could find the Tough Case in stores to give it a test before purchasing. I hate having to buy online and pay return costs for shipping if I don't like it but I guess that's what I'll have to do.
*update* Just ordered a Tough Case. There is a 20% off code for their online store: CM06-SP20. The online store has free shipping to US addresses and didn't charge me tax, so $28 total for the tough case (originally $35). Not bad! If I don't like it I can just pay return shipping. I might just keep it for a backup.
Click to expand...
Click to collapse
eep - its on amazon for $30 + free shipping (which is free returns)
Anyone know if either the tough case or the barely there case will fit into the belt holster for the Seido Surface case(aka the plaitunum case at Best Buy)?
I'm currently using a TPU case in the Platinum holster because I like the added camera area coverage of the TPU case. I just hate the camera button covering of the TPU case.
The Case Mate cases look great but I really need a belt clip with them.
the wifes casemate shipped yesterday and will be here this weekend ill toss up pics
Sent from my PC36100 using XDA Premium App
Ok, I finally got my Otterbox Defender today. First impression is that it isn't exactly the way I thought it would be. I am not sure exactly what I was expecting but I know it wasn't quite what I got.
Pro: plastic shell feels pretty solid around phone and I really like the way the solid clear protector covers the whole screen it makes me feel a lot less worried about messing up my phone. The silicon/rubber outer sleeve holds the two halves of the hard shell together and gives a good grip. There is no way for it to fall out of the holster.
Con: my biggest complaint would be the silicone/rubber outer sleeve feels a bit sloppy. I would have expected it to be tighter, more exactly form fitting. The outer sleeve also picks up every piece of lint that comes it's way and because it is a black case white pocket lint shows very well. It is very difficult/awkward to remove from the holster, that may get better over time as out gets worn in a bit.
Conclusion: pretty good case that should do it's job but over priced at this time, at $10 it would be a deal, at $15 it would still be a good value, at $20 it's something I would consider and at the $30 I paid after shipping and handling well I feel like I over paid but I don't feel like I was robbed. I will be keeping it.....for a while at least.
***EDIT***
Ok after playing with it, the fact that the soft outer case is not super tight is not as annoying as the lint sticking to the outside of it.
Sent from my MB855 using XDA App
I have one and have to say the biggest issue is the bulk.
It pops into and out of the holster so simply it's disgusting....dunno why you had problems there ?
If you spend a few moments and make ABSOLUTELY CERTAIN that the soft rubber/silicone outer shell is on properly it is not loose in the slightest. It is in fact quite snug. It's a bit trying to get it on perfect, but it's time well spent..
My complaint about it is when you use the holster as a vertical stand and have the phone facing outwards with the charger cable plugged in...the little flap that covers the charge port is not quite in the correct spot (you'd have to try it and see it for yourself, very difficult to explain).
The holster snap/clasp thing is in the way of that formentioned flap.
Not a deal breaker....I will be keeping the otterpop.
editater>
BTW, it's a holster made to go on your belt or the waist of your trousers....why are you concerned with lint sticking to it when it should never see any lint if used in the fashion it's intended for ?
Well after a little time I figured out why it WAS loose and had went on WAY too easy.......you see I live in a desert.....and it's summer AND my case had gotten stuffed in my mail box for oh at least a few hours before I got home and went to put it on. Now after both it and I have cooled off and had a kick a$$ nap, it fits quite well. Since it's little baking in the desert episode it may never be as tight as it would have been but it is very snug over all and no longer has any gaps or bulges.
As for the holster.....maybe it is because I am left handed or maybe mine it's just extra tight in the holster, but it is a chore to get outso I put it in my pocket.I may try to work with the holster some but together with case and holster it's pretty dang big. I will use the holster on a limited basis more then likely.
***EDIT***
Since I don't really care for the holster I still feel I over paid, but since the soft cover fits better now I don't feel I over paid quite as much.
Sent from my MB855 using XDA App
Personally speaking, I wouldn't use the Defender for day-to-day protection. There are many other options available which offer less bulk and less lint-grabbing.
The Defender is perfect for rough users such as construction workers, farmers, soldiers, truck drivers, etc. The Defender has protected my MoPho twice already while on duty. Both were scenarios where I feel a 'lesser' case may have allowed damage to the device.
$30 is nearly a third of the cost of replacement under insurance. It is a tad on the expensive side. However, I think this is the very best level of personal device protection short of encasing it in a brick of silicon gel.
Compared to the defender I had on my evo the photon defender is perfectly tight. I went straight to radio shack and bought the defender after I bought my photon at sprint 3 days ago and I've only taken it off once to install my new sd card yesterday. As far as it sitting in the holster just make sure you push the rubber in all around the mounting clips on the sides. If they stick up a little it won't secure correctly. I've used defender cases before so I knew what I was getting but I must say this one is very well built.
The only thing that I don't like about the defender cases is that the screen protector just seems to take away from the beauty of device screens. I had my evo in a defender case for a week. I took it out one day and once I saw the screen again I was floored to how much I was missing by having the defender plastic over it!
And boom goes the Shooter
I've had the defender for 3 weeks now and I love it but it isn't for everyone. If you want a somewhat rugged smartphone that can take a few drops there are plenty of cases for you to choose from. If you want a case that protect your phone from falling out of a speeding vehicle then you want the defender, I should know i accidentally left my phone on top of my vehicle when driving away one late night.
It is bulky but that is fine, I don't want a sleek phone that breaks. This thing is like a brick. If you are playing around with the software and usually bork your phone you may want an easier to remove case. I hate doing battery pulls because it takes too long to remove this case and you end up with too many parts in your hands. This case is my insurance policy. Its a great case for people who play hard with their phones. The commuter case is a great case too but you have to match the case to your lifestyle. For me, I wont buy a phone that doesn't have a defender case.
In my experience the phone does not move around inside this case. It stays locked tight in its plastic shell. The rubber can be stretched easily but it is form fitting to the plastic shell and has just enough play to make it comfortable to remove. You have to tuck the rubber in all around the phone, as well as on the sides and on the back near the kickstand. Failure to do so will cause it to shift around but if you properly put this case together it shouldn't move at all. If it does then you may want to call Otterbox.
Now the defender series comes with the adjustable holster. If you do not use a holster then you may want a commuter series case. This thing isn't too easy to get in and out of your pocket since the rubber does grip well to cotton pockets. I use the holster about half the time and keep this thing in my pocket the other half. I'm okay with this but if you wear really tight skinny jeans you'll probably hate this case. So if you don't use holsters or you wear skin tight pants then you should get something else.
The screen protector causes glare and degrades the visual quality of the screen. The camera lens also has a protector over it which I find does degrade the camera quality if it is not properly cleaned. I don't find this to be a deal breaker because I could easily remove that piece of protective plastic. If anything I wish it was removable and replaceable out of the box.
Its a great case that can take a ton of abuse and leave your phone looking brand new.
sub2k1 said:
This thing is a brick.
Click to expand...
Click to collapse
I cringe at your use of this term!
Car Dock & case.
Is the Defender series compatible with the Car dock? If not how easy is it to remove.
I never tested it on the car dock but I can guarantee you it does not work with the HD Dock. While it is not too difficult, you don't want to disassemble this case on the regular. Reassembly is a *****.
droidevo1 said:
Is the Defender series compatible with the Car dock? If not how easy is it to remove.
Click to expand...
Click to collapse
No, I can tell you it's not compatible....I have the Commuter and it doesn't even work in the Car Dock.
I was hoping that by taking off the outer rubber shell of the defender series, that maybe the hard cover would still fit in the car dock. I'll let you know in a few weeks when everything finally arrives in the mail.
Yeah, let us know.....I even bought a cheapo $5 case (the thin plastic ones) just to try it.....nope!! Wouldn't work.
Yeah this case is still a lint magnet even without putting in my pocket and now I have some dust between protective screen and the actual screen.....of course some compressed air took care of it but I had to open it for that. I also worry a bit about heat while tethering. Not that it gets anywhere near as hot as my htc hero did (could fry an egg on it) but if it got warm enough to feel trough hard case AND the soft rubber it must have been pretty warm inside (does it get hotter doing wifi tether as opposed to usb & which uses more battery).
Sent from my MB855 using XDA App
Does anyone know what the difference is between the $50 Defender (Revision A) and the first revision that other sites (other than otterbox.com) sell? The difference in the model # is the letter A at the end.
Can someone post pictures of this case on their phone? I have always bought otterbox defenders but im debating if i should buy another after a bad experience with the one for the Evo 4g.
Sent from my MB855 using Tapatalk
I don't think a picture will do it any justice. It is one of those things you are really going to want to see and touch in person to decide if you like it or not. I like mine, lint magnet and all because it makes me feel my Photon its safe and for that I am willing to live with the trade off of some lint and a little extra bulk. Of course every time I take off the case to clean it I remember just how sexy a naked Photon is and I consider slapping on an invisashield screen protector and going naked.
Sent from my MB855 using XDA App
I just received my otter box defender in the mail today. I bought mine at amazon for $27 + $5 S&H. The case appears to be genuinely an otter box. The box it came in was damaged and opened, but the case itself is fine. My guess is that the amazon ones are cheaper because they are in damaged boxes.
As far as I'm concerned though I'll take the damaged packaging for the $20 savings.
Bought the Defender last month and was enamored by the fact that i can throw, kick, slam the phone anywhere and it wouldn't get damaged. The only problem was (and this was a big one) that the case is so f***ing huge for regular use! I got fed up of that and exchanged the case for the commuter. SOOO much better for everyday, common hazards.
IUH1991 said:
Bought the Defender last month and was enamored by the fact that i can throw, kick, slam the phone anywhere and it wouldn't get damaged. The only problem was (and this was a big one) that the case is so f***ing huge for regular use! I got fed up of that and exchanged the case for the commuter. SOOO much better for everyday, common hazards.
Click to expand...
Click to collapse
Bugger, just ordered the Defender, does it really add so much bulk?
Sent from my MB855 using xda premium
Man this phone is so nice and sleek, I'm not sure if I want to put a case on it or not.
Love this phone compared to my evo 4g. Blows it out of the water. Decent battery life as well.
What are your thoughts on cases?
I had started a seidio active vs otterbox commuter thread but didn't get much love. Maybe people are using other cases I haven't thought of. All I am using is a leather pouch.
ideas, thoughts?
I'm using a Commuter that I modified slightly for the car dock. I always second-guess the expensive Otterbox cases but last week the Photon took a trip to the floor and nearly bounced back into my hand. That settled that one.
One from the mall. Black rubberized and i'm happy. I believe its cellairis or something like that
Sent from my MB855 using XDA App
One thing I don't like so far is it is a little difficult to push power button. I find myself missing it from time to time. I think the otterbox would help with that but I'm not sure if I wanna give up the lightweight and sleek feel of it.
Yeah, sleek and Otterbox don't go together. I prefer caseless but I know it only takes one drop to all but stop my life. I'm finding myself waaaay too reliant on this little device.
Amazon had/has the Commuter for $22, which I think is worth it.
How much bulk does it add?
Kevets said:
Yeah, sleek and Otterbox don't go together. I prefer caseless but I know it only takes one drop to all but stop my life. I'm finding myself waaaay too reliant on this little device.
Amazon had/has the Commuter for $22, which I think is worth it.
Click to expand...
Click to collapse
The commuter is roughly 5/8" thick by 2 3/4" wide by 5 1/4" tall.
The phone is roughly 1/2" by 2 5/8" by 5" respectively.
The case is actually a good hand-grip size.
Using the Seidio Active. So far I am liking it. Fits good and nice balance for me between function and protection.
Thanks for that.
Kevets said:
The commuter is roughly 5/8" thick by 2 3/4" wide by 5 1/4" tall.
The phone is roughly 1/2" by 2 5/8" by 5" respectively.
The case is actually a good hand-grip size.
Click to expand...
Click to collapse
I've dropped my phone so many times with my Otter-box Commuter Case and stopped gasping after the third drop I'm clumsy but it's defiantly a great case!
Im using the otter box commuter case and its been great so far, I drop my phone alot and I know that the otter box works great, I dropped a friends evo 3d and the screen shattered,, no bueno especially when your trying to date her
---------- Post added at 12:20 AM ---------- Previous post was at 12:20 AM ----------
Kevets said:
Yeah, sleek and Otterbox don't go together. I prefer caseless but I know it only takes one drop to all but stop my life. I'm finding myself waaaay too reliant on this little device.
Amazon had/has the Commuter for $22, which I think is worth it.
Click to expand...
Click to collapse
I got mine at the sprint store for 20
I first bought my wife this case for her Evo and liked it so much that I got one for my mopho! Its thin, feels like it part of the phone and yet it can take some drops.
http://www.amazon.com/gp/aw/d/B005F9ZQB4?is=300&qid=1318310572&sr=8-2&in=3
I currently have 2 otterbox cases. 1 defender series and 1 commuter series. Both have their uses. I mainly use the defender for work so I can easily clip my phone into the holster and not leave it laying around in a rush to go do something. It's also amazing for those unfortunate occasions where the phone leaves your hand and makes a 3 or 4 ft dive to the ground. Access to every button and port is also amazing with this case. power/wake button is very easy to press, no problems at all. same with volume rocker and camera buttons. I love the port covers on this case b/c they are extremely durable and long lasting. However, my favoite benefit of the defender case is how easily it can be removed... I know you're thinking "wtf, this guy is an idiot!" Well the reason I say that is b/c i actually sell cellphones for a living and offering otterbox cases is second nature. having installed and removed just about every case they make, many of the other defenders are difficult to remove with the little clips on the internal plastic part of the case which is snug on the phone. The photon defender is almost effortless if you like to trade out ur cases on occassion it is a major benefit
I use the commuter series when not at work b/c I don't typically liek to wear my phone on my hip if I have an available pocket... just my personal preference. Commuter is definetly much less bulk but I also don't like the way that it's designed as far as installing/removing from the phone. It's a bit of a pain. Also, unfortunatly the part of the case that makes it grip in your hand makes it difficult to insert/remove from a normal pocket.
I have decided that I'm going to try out one of the tpu cases from amazon.com for a non work alternative and we'll see how that goes.
Let me know if you wanna sell the commuter.
rickyhfc02 said:
I currently have 2 otterbox cases. 1 defender series and 1 commuter series. Both have their uses. I mainly use the defender for work so I can easily clip my phone into the holster and not leave it laying around in a rush to go do something. It's also amazing for those unfortunate occasions where the phone leaves your hand and makes a 3 or 4 ft dive to the ground. Access to every button and port is also amazing with this case. power/wake button is very easy to press, no problems at all. same with volume rocker and camera buttons. I love the port covers on this case b/c they are extremely durable and long lasting. However, my favoite benefit of the defender case is how easily it can be removed... I know you're thinking "wtf, this guy is an idiot!" Well the reason I say that is b/c i actually sell cellphones for a living and offering otterbox cases is second nature. having installed and removed just about every case they make, many of the other defenders are difficult to remove with the little clips on the internal plastic part of the case which is snug on the phone. The photon defender is almost effortless if you like to trade out ur cases on occassion it is a major benefit
I use the commuter series when not at work b/c I don't typically liek to wear my phone on my hip if I have an available pocket... just my personal preference. Commuter is definetly much less bulk but I also don't like the way that it's designed as far as installing/removing from the phone. It's a bit of a pain. Also, unfortunatly the part of the case that makes it grip in your hand makes it difficult to insert/remove from a normal pocket.
I have decided that I'm going to try out one of the tpu cases from amazon.com for a non work alternative and we'll see how that goes.
Click to expand...
Click to collapse
TPU! my sis is rockin one too and ive liked them. fit firm, slid easy into my pocket, good feel in the hand, and they are like 6-7 bucks
might have to step up and get me a TPU case, that thing is sexay!
has anyone found a carbon look case yet? i'd be much much more interested in form than function if one is found!
rickyhfc02 said:
I currently have 2 otterbox cases. 1 defender series and 1 commuter series. Both have their uses. I mainly use the defender for work so I can easily clip my phone into the holster and not leave it laying around in a rush to go do something. It's also amazing for those unfortunate occasions where the phone leaves your hand and makes a 3 or 4 ft dive to the ground. Access to every button and port is also amazing with this case. power/wake button is very easy to press, no problems at all. same with volume rocker and camera buttons. I love the port covers on this case b/c they are extremely durable and long lasting. However, my favoite benefit of the defender case is how easily it can be removed... I know you're thinking "wtf, this guy is an idiot!" Well the reason I say that is b/c i actually sell cellphones for a living and offering otterbox cases is second nature. having installed and removed just about every case they make, many of the other defenders are difficult to remove with the little clips on the internal plastic part of the case which is snug on the phone. The photon defender is almost effortless if you like to trade out ur cases on occassion it is a major benefit
I use the commuter series when not at work b/c I don't typically liek to wear my phone on my hip if I have an available pocket... just my personal preference. Commuter is definetly much less bulk but I also don't like the way that it's designed as far as installing/removing from the phone. It's a bit of a pain. Also, unfortunatly the part of the case that makes it grip in your hand makes it difficult to insert/remove from a normal pocket.
I have decided that I'm going to try out one of the tpu cases from amazon.com for a non work alternative and we'll see how that goes.
Click to expand...
Click to collapse
The otterbox is a lil bulky, and the commuter is good too.
---------- Post added at 07:50 PM ---------- Previous post was at 07:31 PM ----------
wagonattack said:
might have to step up and get me a TPU case, that thing is sexay!
has anyone found a carbon look case yet? i'd be much much more interested in form than function if one is found!
Click to expand...
Click to collapse
Check Amazon for a carbon case.
Check this Carbon Fiber Case Out, CLICK HERE (http://www.amazon.com/Sprint-Motoro...SU12/ref=sr_1_3?ie=UTF8&qid=1318549681&sr=8-3)
I like the look of that case but the power button is a little tough to press so if I do get one I think I want one with something that goes over the power button.
I currently have Ghost Armour, It's more of a scratch resistance film, not a protective cover. I do not like anything that adds bulk personally. With that said, in the last 5 years, I have owned a AT&T Tilt, AT&T Fuze, Sprint Evo 4G, and now Photon. I dropped the Fuze once. I treat my phones like a 2 month old baby!. I have special mouse pads at work, living room, bed room, ect. To be honest, I have sold ALL of my phones for more that I paid for them in the first place! David
Seidio Active + holster. loving it!
Sent from my MB855 using XDA App
Just bought the Silicrylic Incipio Case with the Silicone Core on Amazon (can't post the link due to restrictions).
Is it any good? I saw cases for 4-5 dollars, but I decided to bite the bullet and purchase this one for better protection. However, I have never used a case for my phones. I used a holster for my old school Storm, but stopped halfway through. Does this case feel good in the hand? Does it have bulk? Also, does it make the volume and power buttons easier to push? How are battery pulls?
It's a real good case, I have the gray one and its really nice and it fits the rezoned perfectly
I have the blk/blk and like the feel of it and knowing that it has some extra protection for my phone
engsoccerfan said:
Just bought the Silicrylic Incipio Case with the Silicone Core on Amazon (can't post the link due to restrictions).
Is it any good? I saw cases for 4-5 dollars, but I decided to bite the bullet and purchase this one for better protection. However, I have never used a case for my phones. I used a holster for my old school Storm, but stopped halfway through. Does this case feel good in the hand? Does it have bulk? Also, does it make the volume and power buttons easier to push? How are battery pulls?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1383991
Taebom said:
http://forum.xda-developers.com/showthread.php?t=1383991
Click to expand...
Click to collapse
Searched for it actually, couldn't find it though
My girl has the pink/white one. Feels a bit nicer and slimmer than my otterbox commuter case but i dont think it offers better protection than the commuter. Im liking the soft rubber feel on the hard case though. Oh and the ports are exposed whereas the ports are covered by a silicone flap on the commuter. To me, thats a huge + since im constantly in the outdoors getting my hands dirty.
Sent from my HTC Rezound
I have the grey on grey one, and frankly, I don't think it fits as well as the Seidio Active, which I also have, and prefer.
I love my Evo LTE, it is an awesome phone! When I bought it though I received the horrible news that TEP from Sprint had gone up as well as the Asurion Deductible. Normally I don't like cases because I like to keep my phone sleek but with this in mind I had to buy one. I opted for the OtterBox Commuter (I bought on Amazon for a little over $20 shipped). So I thought I'd hit you guys up with a review just in case anybody is on the fence about what case to get.
Overall:
I liked the tight fit, the good amount of protection without the bulk, and the fact that the kickstand is perfectly accesible and usable in both directions Plus it's relatively cheap. Check attached images. I had no problems with any of the cutouts for microphone or the back camera. Also the charging port and headphone jack coverings worked fairly well. They were a bit bothersome, mainly the headphone jack, depending on the size of the plug but overall they're pretty good.
Fit:
I must say this case has a TIGHT fit on my phone! It is not loose anywhere and the silicone is actually pretty tight on there unlike other two layer cases I've tried. It is tight enough that no dust has gotten underneath it to the case which I hate when cases do that! Also all the buttons are unaffected by the case and I like the feel they have with it on. Oh and the kickstand can still be used both ways, port up or down!
Size:
The case hasn't added much bulk at all. I still think this phone is pretty thin with the case on. I took a picture next to an Evo 3d with no case on just for size comparison and as you can see, this case adds little to no bulk.
Protection:
I feel my phone is pretty well protected. I already got past the 1st scary fall yesterday when I dropped it running down some stairs :/ but my phone was not harmed at all, neither was my case. Obviously it's not meant to be a hardcore heavy duty run over with a car case (as rumored with some Ballistics) but it's a good balance between protection and keep it thin.
Screen Protector:
I personally don't like screen protectors too much. It seems unnecessary for this phone with Gorilla Glass but it's still a nice gesture for it to be included. I installed it for demonstration purposes since many people with screen protectors had problems with proximity sensor. The protector included in the case had the cutout for the proximity sensor which was definitely a plus. I also noticed it's a pretty hard screen protector and feels almost like bare glass, but I still don't plan on keeping it for long lol
The Bad:
The only bad thing I've found so far is that the silicone is a little bit of a dust magnet. It hasn't gotten too serious to where it bothers me but it's just something to note.
cor4twenty said:
The Bad:
The only bad thing I've found so far is that the silicone is a little bit of a dust magnet. It hasn't gotten too serious to where it bothers me but it's just something to note.
Click to expand...
Click to collapse
This is what I hate about silicone. Also, it ends up making it difficult to pull out of your pocket because of how sticky/tacky it is. Thanks for the review.
timtlm said:
This is what I hate about silicone. Also, it ends up making it difficult to pull out of your pocket because of how sticky/tacky it is. Thanks for the review.
Click to expand...
Click to collapse
Definately true on most silicone cases but since only the corners are exposed
Silicone its not too bad
Sent from my EVO using xda app-developers app
Great review buddy. I get the lint all around the edge of the screen's silicone also. Anyone have any good cleaning tips for getting lint and dust off the silicone parts?
Sent from my LTEvo
Gibson.Dubs said:
Great review buddy. I get the lint all around the edge of the screen's silicone also. Anyone have any good cleaning tips for getting lint and dust off the silicone parts?
Sent from my LTEvo
Click to expand...
Click to collapse
Well thanks friend. I just put a little water in my hands and clean it that way. Or spit if you want to do it the survivor man's way haha
Sent from my EVO using xda app-developers app
I dont normally like to put cases on phones either but this phone...i dont know I had the overwhelming urge to put a case on it. Now i was going to go wit ha normal regular hard shell case off of ebay for 5 bucks but..no.. not this time. I got the otterbox commuter aswell. Truth be told I was worried about the silicone not fitting perfectly but to my surprise it fits damn well. Plus the case feels good in the hand. I actually like how the phone feels with the case on. i did put the screen protector on because look at it this way. $600 phone with ''gorilla glass''..... youre really not going to do anything to protect it? Gorilla glass is scratch resistant not scratch proof. My opinion is youve gotta have a few screws loose if youre not going to put a screen protector on the phone.
over all great case, feels good, doesnt add bulk.
The defender however...makes the phone huge
I rocked my OG for two years with every rugged case u could think of and never worried about the phone. The last month I had the phone I had it naked as all of my cases were breaking on me. I loved how great the Evo felt naked and how easy it was to slip it into my pocket. Anywho, I ended up dropping it and shattering the screen. I bought the new Evo and slapped the Commuter on it before leaving BB. I thought the Defender was way too big for pocket use (I'm over the belt clip thing). It maintains the sleekness of the OG Evo, so, I love it! The included screen protector is pretty good too surprisingly. Not a single complaint from me!
Yeah I have actually kept this case on and been loving it. The case adds a really nice feel to my phone and I honestly like the look it gives my phone. I have yet to try the defender but when I do ill do a write up on it as well
Sent from my EVO using xda premium
I love the review. I'm actually about to switch from the defender to the commuter case. Getting tired of the extra bulk and the rubber on the defenders seem to tear rather quickly. I had the same tearing prob when I had a defender on my e3d. Had the e3d defender replaced twice. So again thanks for the review picking up a commuter case tomorrow.
Bought the same case as soon as I got my phone, beat case hands down still nice and thin the dust magnet I agree but its protective and not heavy ! It was cheap too off amazon. The port cover is clever
Sent from my EVO using xda app-developers app
Yeah im still using my original one and even after many falls it looks New and my phone is perfect,.no.scratches.
Sent from my EVO using xda premium
I had the Defender on my phone from day one. I just ordered this one. It looks a little slimmer and will fit my pocket better. Thanks for the review.
i so wish this case came with a belt clip!!
i got one these they nice:good:
evo401 said:
i so wish this case came with a belt clip!!
Click to expand...
Click to collapse
You can buy the seidio belt clip. The phone fits great with the case on.
Edit:
http://www.seidioonline.com/htc-evo-4g-lte-spring-clip-holster-p/hlhtjetas.htm
Sent from my HTC Evo LTE powered by Meanrom
This case is awesome!
Sent from my EVO using xda app-developers app
mexiking713 said:
You can buy the seidio belt clip. The phone fits great with the case on.
Edit:
http://www.seidioonline.com/htc-evo-4g-lte-spring-clip-holster-p/hlhtjetas.htm
Sent from my HTC Evo LTE powered by Meanrom
Click to expand...
Click to collapse
I was wondering if that would fit ..I just wish otterbox would make one too
Sent from my EVO using xda premium
I have the defender case and the rubber over the charging port keeps breaking off. Does that happen with the commuter case?
Sent from my EVO using Tapatalk 2
Yeah spot on review I feel the same way about my commuter case. I had the defender for my OG EVO but I like the feel and look of the commuter on my LTE so much better
cor4twenty said:
I love my Evo LTE, it is an awesome phone! When I bought it though I received the horrible news that TEP from Sprint had gone up as well as the Asurion Deductible. Normally I don't like cases because I like to keep my phone sleek but with this in mind I had to buy one. I opted for the OtterBox Commuter (I bought on Amazon for a little over $20 shipped). So I thought I'd hit you guys up with a review just in case anybody is on the fence about what case to get.
Overall:
I liked the tight fit, the good amount of protection without the bulk, and the fact that the kickstand is perfectly accesible and usable in both directions Plus it's relatively cheap. Check attached images. I had no problems with any of the cutouts for microphone or the back camera. Also the charging port and headphone jack coverings worked fairly well. They were a bit bothersome, mainly the headphone jack, depending on the size of the plug but overall they're pretty good.
Fit:
I must say this case has a TIGHT fit on my phone! It is not loose anywhere and the silicone is actually pretty tight on there unlike other two layer cases I've tried. It is tight enough that no dust has gotten underneath it to the case which I hate when cases do that! Also all the buttons are unaffected by the case and I like the feel they have with it on. Oh and the kickstand can still be used both ways, port up or down!
Size:
The case hasn't added much bulk at all. I still think this phone is pretty thin with the case on. I took a picture next to an Evo 3d with no case on just for size comparison and as you can see, this case adds little to no bulk.
Protection:
I feel my phone is pretty well protected. I already got past the 1st scary fall yesterday when I dropped it running down some stairs :/ but my phone was not harmed at all, neither was my case. Obviously it's not meant to be a hardcore heavy duty run over with a car case (as rumored with some Ballistics) but it's a good balance between protection and keep it thin.
Screen Protector:
I personally don't like screen protectors too much. It seems unnecessary for this phone with Gorilla Glass but it's still a nice gesture for it to be included. I installed it for demonstration purposes since many people with screen protectors had problems with proximity sensor. The protector included in the case had the cutout for the proximity sensor which was definitely a plus. I also noticed it's a pretty hard screen protector and feels almost like bare glass, but I still don't plan on keeping it for long lol
The Bad:
The only bad thing I've found so far is that the silicone is a little bit of a dust magnet. It hasn't gotten too serious to where it bothers me but it's just something to note.
Click to expand...
Click to collapse
After 2 weeks with mine I have to say I love this case. It's thin very protective and it looks good. Very satisfied with it.
Sent from my EVO using xda app-developers app