Related
I have debugging on , disc drive, installed sdk manager, htc drivers , download the fr3vo file and try to run and get this ,,,, What am i missing
Arnezie said:
I have debugging on , disc drive, installed sdk manager, htc drivers , download the fr3vo file and try to run and get this ,,,, What am i missing
Click to expand...
Click to collapse
Instead of disk drive put it in USB charge only. Also if it still doesn't work, restart the phone and try again. Let me know if your still having problems
Oh also, I just looked at your picture, your adb service is not running. Open command prompt and change your directory to where adb is. Typically something like C:/android/android-sdk/platform-tools.
Then type adb devices or any other command and that should start up adb. Once again let me know if you have any questions
Isn't this right?
It very well could be. Mine is set up slightly different. But go into the sub folders and you should find one named tools or platform tools and one will contain adb. So you just need to find adb.
BDawgTrap said:
It very well could be. Mine is set up slightly different. But go into the sub folders and you should find one named tools or platform tools and one will contain adb. So you just need to find adb.
Click to expand...
Click to collapse
? I am not sure adb is installed right, how do I know
By going into the sub folders of your android sdk going into tools or platform tools and it will be there. It's named adb.ext. ext being extension , I don't remember what the extension is. If you can't find it I would uninstall android sdk, go to the site http://developer.android.com/sdk/index.html , download the recommended package, install it and when it asks where you want to install it use C:/Android/android-sdk.......
It could also be in your program files. I would just reinstall if you don't find it easily...
Re downloading now
Make sure you uninstall and delete everything so It's not sloppy...
Is it suposed to take forever once you get to the installing archives part?
Ya there are a few things that take a while. I don't know exactly what parts because I usually just leave it for a while and come back when It's done. Did you install it to the right location like I said earlier?
Yes i installed it where you said, it is still installing.........
ok re installed , tried 4 more times , somthing just isnt right and I don't know what it is?????
Dude just use the post thats Easy Frevo w/ overclock and bloat remover..u plug in phone to computer in charge mode with usb debugging on and make sure phone screen is not on(but phone is) and hit like 2 buttons to root and 2 buttons to overclock..so much easier
EDIT>> Heres the one. http://forum.xda-developers.com/showthread.php?t=1158400
irishgreen said:
Dude just use the post thats Easy Frevo w/ overclock and bloat remover..u plug in phone to computer in charge mode with usb debugging on and make sure phone screen is not on(but phone is) and hit like 2 buttons to root and 2 buttons to overclock..so much easier
EDIT>> Heres the one. http://forum.xda-developers.com/showthread.php?t=1158400
Click to expand...
Click to collapse
You still need adb for that method , that is where i think somthing isn't right.
What is it saying? Have you got adb started? You need to be able to get into the command prompt and run adb commands. Once you can do that if it doesn't work there are a few workarounds you can try but you have to have adb working.
this is what it is saying
Adb still isn't running. Have you found where adb is located yet?
C:\Program Files (x86)\Android\android-sdk
U shouldn't
i dont think you really need to root your phone if you can't even set up adb .... for one you are not even in the correct directory ... u have to cd C:/android/android-sdk/platform-tools then type adb devices
im trying to root my atrix, i have followed the steps in the post however each time i type in the flash preinstall preinstall.img the cmd says that it cant be read....im lost. is there a easier way too root instead of cmd. btw im on 2.3.4 i did nothing to my phone, im just trying to root it so i cant install roms
Make sure that you put all your root files, on your pc, on c:\root, and not in a subdirctory. Then, while you're trying to root, make sure you are in that directory when you're entering the commands.
the files inside the folder i download have to be in a folder or just in C:\
also when im in cmd the whole time it says that im C:\documents and settings\something>
also im running windows xp on a macbook if that matters let me know
make a folder in c:\
To get to root directory in command prompt: "cd c:\" (+ any other folder destination that you want to get to).
ok i flashed the preinstall and rebooted the phone, do i have do go back to fastboot? or just stay with the phone on (but the cmd says phone not found)
mac208x said:
ok i flashed the preinstall and rebooted the phone, do i have do go back to fastboot? or just stay with the phone on (but the cmd says phone not found)
Click to expand...
Click to collapse
after reboot you should be done... and rooted. Run titanium backup to check or download rootcheck from the market
Bender B. Rodgriguez said:
after reboot you should be done... and rooted. Run titanium backup to check or download rootcheck from the market
Click to expand...
Click to collapse
what about the other stuff? i just did the preinstall and thats it
ok so when i do adb shell and than preinstall/su it says access denied.....
mac208x said:
ok so when i do adb shell and than preinstall/su it says access denied.....
Click to expand...
Click to collapse
Sorry I misunderstood you at first. I didnt realized u had just done preinstall stuff... Is usb debugging enabled on the phone??
Bender B. Rodgriguez said:
Sorry I misunderstood you at first. I didnt realized u had just done preinstall stuff... Is usb debugging enabled on the phone??
Click to expand...
Click to collapse
yes, should i put the usb as mass storage?
mac208x said:
yes, should i put the usb as mass storage?
Click to expand...
Click to collapse
No, it needs to be on usb debugging to use adb.
If i remember correctly one of the steps does give you an error but you just ignore it and type the rest of the commands. Im not sure if that is the step you are on though.. Im just recalling from memory. Complete the rest of the steps in the tutorial you are using and see if it works
Bender B. Rodgriguez said:
No, it needs to be on usb debugging to use adb.
If i remember correctly one of the steps does give you an error but you just ignore it and type the rest of the commands. Im not sure if that is the step you are on though.. Im just recalling from memory. Complete the rest of the steps in the tutorial you are using and see if it works
Click to expand...
Click to collapse
i did in fact ignored it but nothing happened
mac208x said:
i did in fact ignored it but nothing happened
Click to expand...
Click to collapse
have you tried
Code:
adb shell
/preinstall/dosu
instead?
everything says access denied >.<
Bender B. Rodgriguez said:
have you tried
Code:
adb shell
/preinstall/dosu
instead?
Click to expand...
Click to collapse
i tried everything
mac208x said:
i tried everything
Click to expand...
Click to collapse
well I'm about out of suggestions here. My only other one is to run cmd "as administrator" or you can flash an image with root built in.
However, it should work. this is the method I used to root my atrix and countless others as well. Also you may want to make sure you have the right device drivers installed too.
whats the other method? coz i just keep getting this stupid premission denied the whole time, or how do i know if im on admin cmd?
Get rootchecker from the market and check to see if you have root privileges.
mac208x said:
whats the other method? coz i just keep getting this stupid premission denied the whole time, or how do i know if im on admin cmd?
Click to expand...
Click to collapse
To run as admin right click cmd and choose the "run as admin" option.. If you are admin the directory you start out in is C:\
windows/system32.
i think thats the problem coz im running as "owner" but i cant get into admin becouse there is a password required that i dont know, anyone know what would be the password?
Has anyone been able to get the USB host to work with SebastionFM v1.4.0 kernel? I've been playing around with it but no success. I'm running Newts one xxx Rom. Does it have to be enabled in the Rom as well, or do I need to change the fstab? I made a cable, but it may not be right.
Sent from my ADR6425LVW using xda app-developers app
Basically............ no.
texascfdad said:
Has anyone been able to get the USB host to work with SebastionFM v1.4.0 kernel? I've been playing around with it but no success. I'm running Newts one xxx Rom. Does it have to be enabled in the Rom as well, or do I need to change the fstab? I made a cable, but it may not be right.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Try putting a powered usb hub into the equation. I don't know if if will work, because I don't have one, but his sensation kernel needed one to work. But I've been unable to get it working as well.
I made a "y" so it will charge the phone and give power to the USB device, that's no problem. I think it has to do with the vold.fstab file and telling it where to mount at. The sensation kernel download has the updated fstab in the download, but the rezound does not. In the fstab, The mounting scripts are different for the internal and external sdcards than they are on the sensation, I tried adding the line from the sensation to the rezound, but all it did was make my sdcard unreadable. So I restored it and my sdcards work again but no USB drive. I don't know enough Linux command line to really mess around too much. Maybe if someone else does we could get it working right.
Sent from my ADR6425LVW using xda app-developers app
texascfdad said:
I made a "y" so it will charge the phone and give power to the USB device, that's no problem. I think it has to do with the vold.fstab file and telling it where to mount at. The sensation kernel download has the updated fstab in the download, but the rezound does not. In the fstab, The mounting scripts are different for the internal and external sdcards than they are on the sensation, I tried adding the line from the sensation to the rezound, but all it did was make my sdcard unreadable. So I restored it and my sdcards work again but no USB drive. I don't know enough Linux command line to really mess around too much. Maybe if someone else does we could get it working right.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
You don't need to modify /system/etc/vold.fstab to enable USB OTG. It is only configuration file for Volume Manager. If you'll add
Code:
dev_mount usb /mnt/sdcard/usb auto /devices/platform/msm_hsusb_host.0/usb1
first FAT/FAT32 partition of connected device will be automatically mounted to /sdcard/usb directory. Unfortunatelly vold made by HTC has limited functionality, it doesn't mount automatically NTFS partitions.
If you want to check if OTG is working, run command ls /dev/block from Terminal Emulator before and after connecting USB device. You should see additional items, e. g. sda1, sda2 in this sysfs entry.
Thanks Sebastian, ill try this and see if it works on mine. If not then ill assume its my homemade cable not jumping the 5th prong and letting it go into host mode. Have you verified this to work?
Sent from my ADR6425LVW using xda app-developers app
well i double checked my cable and soldered it correctly. i added the line into the fstab but still no dice. the /devices/platform/msm_usb_host.0/usb does not exist in the system though. There are several other /msm_*** entries, but none that have the usb host. are there other files i am missing from the sensation kernel, or should it make them itself? I ran ls /dev/block from the terminal before and after trying to mount but no changes. i did reboot with it connected and it acted like i was connected to a pc, so i just checked charge only. maybe ill try using as a disk drive and see what happens.
texascfdad said:
well i double checked my cable and soldered it correctly. i added the line into the fstab but still no dice. the /devices/platform/msm_usb_host.0/usb does not exist in the system though. There are several other /msm_*** entries, but none that have the usb host. are there other files i am missing from the sensation kernel, or should it make them itself? I ran ls /dev/block from the terminal before and after trying to mount but no changes. i did reboot with it connected and it acted like i was connected to a pc, so i just checked charge only. maybe ill try using as a disk drive and see what happens.
Click to expand...
Click to collapse
I'll check but I need sysfs directory /sys listing and kernel log. Reboot phone and get kernel log directly after boot. It should start with "<6>[ 0.000000] Booting Linux on physical CPU 0".
Run this from Terminal Emulator:
su
ls -l -R /sys > /sdcard/sys_listing.txt
dmesg > /sdcard/kernel_log.txt
here's the kernel log
i appreciate your help
here is the sys_log its in 4 parts as one file excedded the upload limit of 500 or so kb for that file type
btw if i didnt mention before i am running Newts One xXx rom with the latest firmware and radios from the latest RUU before i reflashed his rom. i also have the google now for ics installed if it means anything. and i have usb debugging on, i havent tried with it turned off.
texascfdad said:
here's the kernel log
i appreciate your help
Click to expand...
Click to collapse
This log doesn't contain initial information. Try to get it earlier.
I've done it as soon as possible after it loads, but I can't seem to do it fast enough to het the initial part. Is there a way I can script it into the boot sequence? I'm not familiar enough with the deep parts of the system to do it on my own, but I know enough that I can follow directions if you give it to me.
Sent from my ADR6425LVW using xda app-developers app
texascfdad said:
I've done it as soon as possible after it loads, but I can't seem to do it fast enough to het the initial part. Is there a way I can script it into the boot sequence? I'm not familiar enough with the deep parts of the system to do it on my own, but I know enough that I can follow directions if you give it to me.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Do you have adb installed? It allows to run commands from PC.
I checked your /sys listing and everything look fine.
Yes I do have adb installed
texascfdad said:
Yes I do have adb installed
Click to expand...
Click to collapse
So run adb shell dmesg > dmesg.txt
What would be the best time to run this? Immediately after boot or wait until the os is loaded or do it in bootloader
texascfdad said:
What would be the best time to run this? Immediately after boot or wait until the os is loaded or do it in bootloader
Click to expand...
Click to collapse
30 seconds after boot will be fine. You could also show me your log after connecting USB OTG. When boot will finish, connect USB OTG without any devices and without power connected, disconnect it after few seconds, connect USB and immediatelly get kernel log using adb.
Ok, I will try this when I get home today and post results
Sent from my ADR6425LVW using xda app-developers app
sorry it took so long. here is the dmesg from boot that starts with <6>[ 0.000000] Booting Linux on physical CPU
and here is the kernel log taken immediately after connecting and disconnecting my otg cable not connected to power or a device.
and just for good measure, here is the logs from connecting the otg cable with power and a usb thumb drive. and the other log is disconnecting the cable. I connected the cable to the phone first, then the usb device, then to power. i disconnected simply by pulling the otg from the phone. once again i appreciate you taking the time to try and figure this out for us even though you arent using a rezound. ill help anyway i can.
Hey All,
So I went to push an app from Eclipse to my XT910 (CM10.1, via Safestrap, Rom Slot 1), and found that it wasn't detected by Eclipse, or ADB. Debugging is enabled, and I have the official Motorola drivers installed
When rebooting into the Stock Rom, i was able to use ADB, and push the App to my phone. Is this Regular behavior, or am i missing Something?
There are even another method to push the apps to ya RAZR rather then pushing it from adb or eclipse
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
anurag.dj2u said:
There are even another method to push the apps to ya RAZR rather then pushing it from adb or eclipse
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
Click to expand...
Click to collapse
Sorry, let me clarify. I am writing an app in eclipse, so it's not an apk. What other method is there to push this app to the phone, and still allow me to debug via eclipse?
BarrelRolls said:
Sorry, let me clarify. I am writing an app in eclipse, so it's not an apk. What other method is there to push this app to the phone, and still allow me to debug via eclipse?
Click to expand...
Click to collapse
About the debugging i have no idea because i aint no dev but how ya can push apps to phone is just simple method
1- open root explorer or download from play store if ya don't have
2- then copy the apk from ya internal or external sd card
3- paste it into the data ( root ) and fix the permission
4- reboot
5- profit
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
anurag.dj2u said:
About the debugging i have no idea because i aint no dev but how ya can push apps to phone is just simple method
1- open root explorer or download from play store if ya don't have
2- then copy the apk from ya internal or external sd card
3- paste it into the data ( root ) and fix the permission
4- reboot
5- profit
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
Click to expand...
Click to collapse
Okay, so again, it's not an Apk. And it needs to run through adb for debugging purposes. (eclipse compiles, and data is sent 'back and forth' between device and eclipse)
Does it show in the notification that debugging is on.?
Also what CM10.1 build are you on?
I tried using and it didn't ran the first time. However I disabled & then enabled it back and it worked flawless this time.So thats not a bug.
Sent from my XT912 using Tapatalk 2
neo.ank said:
Does it show in the notification that debugging is on.?
Also what CM10.1 build are you on?
I tried using and it didn't ran the first time. However I disabled & then enabled it back and it worked flawless this time.So thats not a bug.
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
Yeah, I do get the notification, and it's the 05/07 nightly.
Yesterday I set up a vm running Ubuntu 12.04, and tested adb from there, and it worked, which would suggest a driver issue with windows, but seeing this happens with both my desktop and laptop, I'm not too sure.
BarrelRolls said:
Yeah, I do get the notification, and it's the 05/07 nightly.
Yesterday I set up a vm running Ubuntu 12.04, and tested adb from there, and it worked, which would suggest a driver issue with windows, but seeing this happens with both my desktop and laptop, I'm not too sure.
Click to expand...
Click to collapse
That might be cause you installed the drivers from the same place to both your machines. Since the notification turns on, it suggests nothing is wrong at the phone side.
Re-download the drivers and try re-installing.
neo.ank said:
That might be cause you installed the drivers from the same place to both your machines. Since the notification turns on, it suggests nothing is wrong at the phone side.
Re-download the drivers and try re-installing.
Click to expand...
Click to collapse
Already done. I've used both the official Motorola drivers, and the Google drivers. No luck there.
Hi, my sgs3 got the LCD broken, I haven't image and touch don't work, but phone works, it vibrate etc... Now I would like to backup my internal memory /sdcard but I'm in MIUI v5 CM10.1 4.2.2(datagutt), and when I connect it to pc it shows like an usb and don't open, is there a way to backup /sdcard from recovery ?, I can acces anything but can't see and use screen.
Thank's for your help in advance
If it were me I'd look into Philz recovery and usb access. Not tried it myself so can't give any detail, but it rings a bell.
boomboomer said:
If it were me I'd look into Philz recovery and usb access. Not tried it myself so can't give any detail, but it rings a bell.
Click to expand...
Click to collapse
It worked, but it mounted the external sd card and not internal system :/
Look into adb
Sent from my GT-I9300 using Tapatalk 4
rootSU said:
Look into adb
Sent from my GT-I9300 using Tapatalk 4
Click to expand...
Click to collapse
Can you explain a bit more to help me, I already tried something adb recognizes phone and detect it in recovery, but when I do
Code:
C:\Android SDK\sdk\platform-tools>adb backup -all
It doesn't work and give me a lot of text..
EDIT: Maybe need I to put a name after -all ?
EDIT2: Retried adb and get in recovery mode
Code:
Microsoft Windows [version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Tous droits réservés.
C:\Windows\system32>cd C:\Android SDK\sdk\platform-tools
C:\Android SDK\sdk\platform-tools>adb devices
List of devices attached
4df1c6d921804ff9 recovery
C:\Android SDK\sdk\platform-tools>adb backup -all santos
Now unlock your device and confirm the backup operation.
C:\Android SDK\sdk\platform-tools>
How can I unlock ? I'm in recovery and don't have screen ? :/
You want to be using adb pull commands from /data/media
Sent from my GT-I9300 using Tapatalk 4
I must ask, isn't there a "thing" that can be used as MHL and OTG simultaneously? because if there was you could maybe plug it to your pc/tv and use keyboard/mouse
rootSU said:
You want to be using adb pull commands from /data/media
Sent from my GT-I9300 using Tapatalk 4
Click to expand...
Click to collapse
Can you link me to a tutorial, I don't find anyone, I never used adb before, thank's
verynoob said:
I must ask, isn't there a "thing" that can be used as MHL and OTG simultaneously? because if there was you could maybe plug it to your pc/tv and use keyboard/mouse
Click to expand...
Click to collapse
Does MHL work with cm10.1? And where can I find this one with mouse ? (Never seen with mouse)
Mike Skip's toolkit should be able to do the adb commands for you:
http://forum.xda-developers.com/showthread.php?t=1703488
Safe0716 said:
Can you link me to a tutorial, I don't find anyone, I never used adb before, thank's
Does MHL work with cm10.1? And where can I find this one with mouse ? (Never seen with mouse)
Click to expand...
Click to collapse
I've never seen with mouse either I was wondering if there is :laugh:
Safe0716 said:
Can you link me to a tutorial, I don't find anyone, I never used adb before, thank's
Click to expand...
Click to collapse
Theres literally billions of tutorials on the internet. If you didn't find one, you didnt use google. Google "adb pull"
Its so simple, I already gave you most the command
Code:
adb pull /data/media/* c:\users\safe0716\desktop\sdcard
for example.
---------- Post added at 10:44 PM ---------- Previous post was at 10:44 PM ----------
verynoob said:
I must ask, isn't there a "thing" that can be used as MHL and OTG simultaneously? because if there was you could maybe plug it to your pc/tv and use keyboard/mouse
Click to expand...
Click to collapse
You're right, there isn't
rootSU said:
You're right, there isn't
Click to expand...
Click to collapse
thanks for clarifying! btw that comment was funny :laugh:
rootSU said:
You're right, there isn't
Click to expand...
Click to collapse
Wait! look what I've found : http://forum.xda-developers.com/showthread.php?t=2142357 <-MHL + OTG together! (DIY though :silly: maybe they should start making those)
boomboomer said:
Mike Skip's toolkit should be able to do the adb commands for you:
http://forum.xda-developers.com/showthread.php?t=1703488
Click to expand...
Click to collapse
Need screen to work.
rootSU said:
Theres literally billions of tutorials on the internet. If you didn't find one, you didnt use google. Google "adb pull"
Its so simple, I already gave you most the command
Code:
adb pull /data/media/* c:\users\safe0716\desktop\sdcard
for example.
---------- Post added at 10:44 PM ---------- Previous post was at 10:44 PM ----------
You're right, there isn't
Click to expand...
Click to collapse
Thank's, it worked, you saved me <3
I copied everything, now I can just transfer from my pc to my other S3
EDIT: It only copies the /0/ (4.2.2 multiusers...) folder, and I wanted to have a clockworkmod backup wich is before the /0/ folder, I tried
Code:
adb pull /mnt/shell/emulated/ C:\Users\XXXXXX\Desktop\backup
but it doesn't work, anyway ?
/data/media/* should get everything in /data/media....
do
Code:
adb shell
ls /data/media
exit
To see what directories it can see.
you didnt pull /data/media/0 so your cwm folder should be there.
rootSU said:
/data/media/* should get everything in /data/media....
do
Code:
adb shell
ls /data/media
exit
To see what directories it can see.
you didnt pull /data/media/0 so your cwm folder should be there.
Click to expand...
Click to collapse
Everything's OK, thank's for your help, thread can be closed now.
Sent from my GT-I9300 using xda premium
Safe0716 said:
Everything's OK, thank's for your help, thread can be closed now.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Cool. Glad I helped.
My friend`s i9001 had a broken screen. So in order to recover data, I Just connected phone with usb to PC. Even though I could hear connection sound from both my PC and Phone but Phone was not visible in PC.
So I just ranged my friend`s i9001 number. When phone started ringing I pressed HOME Button. I was able to receive call. I disconnected the call within 10-15 seconds. Then after 7 to 10 seconds, I again ranged i9001. And voila I could see phone in My Computer. I have tried in windows 8 64 bits and windows XP. In windows XP , I just installed Samsung SAMSUNG_USB_Driver_1.4.6.0.exe. However in windows 8 I also installed kies. But after installing kies I againg installed SAMSUNG_USB_Driver_1.4.6.0.exe.