I've searched and couldn't find. My bad if i missed it.
So I flashed MIUI and followed the steps of each MIUI rom thread. Everything works perfectly except for one thing. The GPS. It seems that everyone gets the gps to work except for me o.o. well it worked once but after that each time i load up the gps, the app freezes and my phone keeps vibrating. (i have to set the phone to silent using volume keys to stop it) after i stop it every time i hit my home key it vibrates again, nonstop. then everything i try to start up FCs anyone got a solution for this ?
i tried the privacy>reset phone thing but didnt work either.
i've also tried http://forum.xda-developers.com/showthread.php?t=1370910
by the way i tested this with other roms. every rom i tried it on worked. the only roms that didnt are the MIUIs (all of em)
and no i did not drop the phone in water nor is there any sort of damages to the phone.
Have you tried other kernels, my Galaxy Brethren?
yes. i've tried just about every kernel that supports miui.
BUMPPP
10charrrrrrrrr
Odin to stock. Upgtade to a custom 2.2 rom flash Miui from there
Sent from my T959 using XDA App
If you are gettting it with Google maps - I think its a known bug. I got it all the time to.
Try flashing MIUI via my guide.
So it seems like there are two threads about the exact same issue. Here is the same answer repeated again:
I had this same problem for awhile. I used the Yet Another GPS fix and after that I would wipe the GPS data and force it to download new data. This would fix it every time.
THEN today I updated to the new MIUI-112300 and it worked first try without me having to tweak anything.
Good luck!
I've had the same problem - Using Lithium 360 (another MIUI) rom. I haven't checked to see if it's still happening after updating to Volt.
since I don't need GPS too often, it's usually off but last I checked I still had this issue going into Google Navigation I believe.
I'll try Lizeroy's fix and check it out today.
I have read thru a few threads, but they all vary so I am not sure if this is the same issue so i apologize in advance if there is a thread with an answer somewhere...I certainly hope it is not a hardware issue!!...ugh..
I recently flashed Nottach's ROM to my Atrix 4G (excellent ROM!) and was in the process of loading apps and "fine tuning" it to my style and preference when I noticed that my WiFi, Bluetooh and Data are no longer working. I didnt install anything other than a couple of apps that I have been using (GoLauncher, ADW Locker, etc.) so I am not sure why everything stopped working.
I can still make and receive calls and text messages, but I am unable to connect to WiFi ( it sees WiFi signals but it doesnt get past "Obatining IP Address"). Bluetooh enables and disables right away. And I dont see any activity from the Data icon.
I have tried reflashing the ROM, Factory Reset, Wiping Partition/Dalvik, Resetting Permissions, etc. but none of these seem to have an effect on the issue.
I have seen other posts in various forums where some one mentions similar issues and they talk about flashing the antenna via RSD to get it to work, but links to the antenna ROM all seem to be broken.
Any help in getting this resolved would be GREATLY appreciated!
FYI - My phone is Unlocked and I believe it is still Rooted.
Thanks!
Well.. after playing around with reinstalling the ROM I set the Kernal back to Stock AT&T and everything appears to be working again.
So I think the fact that I was using the Faux 1.3Ghz kernal may have caused the issue, which is odd since everything was working fine for about a day before the problem started happening.
Oh well.. i will play around with different kernals to see if there may be a compatability issue some where.
Hopefully this info helps others.
I have been using CM for years, first on the Evo 4G and now on the GS3. Ever since I can remember, I've had issues with GPS on CM. In the Evo days, I always remember flashing a GPS fix (or doing a CLR fix after flashing in from a Sense ROM). Now, with the GS3, I continue to have challenges with GPS on CM. When I had the M builds, I had decent performance with GPS and could get the navigation to lock - as well as maps finding my location. Ever since I went to the CM10 stable build, the navigation just sticks on "waiting for location" and the maps cannot find my location. Super frustrating. I even switched over to AOKP for the time being as the GPS seems to be working great (as well as most of the other features).
I am still itching to get back to CM though...
Here are my questions:
1. Is there a flashable fix for the GPS problem in CM10 on the GS3?
2. I've seen that a few people flashed into ICS, locked nav, and then flashed back to CM - does this work? if so, after doing this, can I re-flash a backup or do I have to wipe clean first?
3. Even if one of the two fixes above works, will I still have sub-par performance with GPS?
Thanks in advance.
Not my answer, rochers from androidforums:
took me quite some time to figure this one out, thought i should post it here in case anyone else has a similar problem.
When i updated to android 4.1.2, i noticed that my google navigation stopped working. It would simply sit there endlessly "waiting for location..." fortunately, there's a simple fix:
1. Go to "settings > accounts > google > location settings".
2. Flip the switch to "on" (i found this was off in my case).
3. Try google navigation again, it should work fine.
I'm not sure why google decided to break up the location settings into two different places like this, but it's a bit silly imo as it's definitely going to catch some people out.
Found this solution on xda, cant post link, but this works.
Click to expand...
Click to collapse
A few months ago I finally had time to upgrade from ME7 to NC5, which I did using the full wipe Odin tar. I installed Safestrap 3.75, and to slot 1 the latest Eclipse rom (I had been using the ME7 version of Eclipse since I first got the phone). I have two minor issues that have bugged me ever since I made the change. I believe they may be due to a dirty flash, which makes me think I should re-flash the rom. They are:
1) For the first day or two of the rom being booted, I am unable to change the keyboard for some reason. This isn't really a problem, because after soft rebooting, this problems does not occur; it will only happen again after the device is fully powered off.
2) My main issue is with Wi-Fi. It works fine most of the time, however, while watching videos in either YouTube or MX Player (over a samba share), sometimes the video will stop playing and I need to press play to continue. I believe this has to do with Wi-Fi, although I am not 100% sure. Sometimes, YouTube will give a connection error before loading the video list. In addition, sometimes Twitch freezes and the chat resets, but the video starts playing again after about a second. The weird thing is, these are the only problems I seem to have with Wi-Fi. Neither of these problems happened on ME7, and I have tried on a few different networks to confirm it still happens.
I mainly wanted to make this post to ask if anyone has input on my situation. Perhaps a way to fix these problems, which I have not seen anyone else post about, or if I should indeed re-flash the rom. In the case that I should re-flash the rom, I was wondering if I could restore a backup of the data partition to prevent needing to have to install apps and configure the phone once more. I feel like this may cause problems as well, which is why I am asking about it. Also, in the case that re-flashing the rom entirely does not help with the problems, I can simply restore a backup to the slot and be back where I started, right? Even if I can not fix these problems, they are fairly minor and I can live with them if I have to, however, I would much prefer to fix them.
I appreciate any input on my situation.
Thanks!
Hi,
as some people may not be sure before switching to the beta version released by nubia, it may be a good idea to list the issues that we found with this rom
here are mine (I only use one sim card)
1: UI is slow and even more slow with full brightness (installing another launcher could help)
2: the notification switchs (data) will be ON whereas data is off . Plain mode also turn off data but the switch stay on
3: bluetooth audio is crappy... there are like sound hole every 5 seconds... can't use it correcly in my car
beside that, it did not tell the car what music is playing (there was no issue on CM12 and Mokee 5)
4: once the new system is installed, you can't reinstall directly install your previous backups as the partition is now different..
new CM12/mokee will be released soon to fix this. In the worst case you can still reinstall kitkat with the nubia update tool
alain57 said:
Hi,
as some people may not be sure before switching to the beta version released by nubia, it may be a good idea to list the issues that we found with this rom
here are mine (I only use one sim card)
1: UI is slow and even more slow with full brightness (installing another launcher could help)
2: the notification switchs (data) will be ON whereas data is off . Plain mode also turn off data but the switch stay on
3: bluetooth audio is crappy... there are like sound hole every 5 seconds... can't use it correcly in my car
beside that, it did not tell the car what music is playing (there was no issue on CM12 and Mokee 5)
4: once the new system is installed, you can't reinstall directly install your previous backups as the partition is now different..
new CM12/mokee will be released soon to fix this. In the worst case you can still reinstall kitkat with the nubia update tool
Click to expand...
Click to collapse
I've tried to duplicate the problem in number 1, but have not had problems. I've also read (don't remember where now) on a couple of the Chinese bbs that this seems common. Some people really think the new UI is slow and others do not have problems. I actually think it runs pretty smoothly.
I agree with number 2. Additionally, even though I have vibrate turned off, the phone always vibrates. Unless I have the phone on silent, then there is no vibrating and no sound. I've tried to have vibrate for silent only and it does not work.
I don't use bluetooth, so I cannot confirm number 3.
I partially disagree with point 4 because you can get much of what you had back previously if you used something like Titanium Backup. As I stated in one of my previous posts, I used Titanium backup to backup all apps and data. After that, I copied the folder to my computer. After installing the Nubia beta update, I transferred the folder back to the phone and restored everything without any problems. On the other hand, number 4 is correct. You cannot go back and reinstall a previous TWRP or CWM backup because of the unified storage. In my opinion, this has nothing to do with Nubia as this applies to any phone that upgrades from 4.4 to 5.0/5.1. If a rom says that it is Android L, but does not use unified storage, it is still technically a modified version of 4.4.
A couple of additional points that I don't like:
Cannot modify the actions of the buttons
No theme engine for further UI modifications
No clock widget (I know it's minor, but many people are complaining about this on the Chinese bbs too.)
One thing that is nice is that I had issues with my battery overheating frequently and since I have updated this has not happened at all. Maybe it's just me, but I'm kind of an app junkie. I'm always trying new apps; installing them, uninstalling them and so on. This process seems to be much quicker now. Additionally, I think that the signal has improved. I now have mobile reception in several areas where it was a dead zone previously.
thank you for your long feedback
in fact i prefer using cwm or twrp backups as i change the entire rom, it may be that some settings are not located at the same place so using a tool like titanium that run on the rom itself may not find all settings (but maybe they improved it since i first tried)
Concerning the UI slownes, I used Mokee and Cm12 on this phone and the feeling was a lot smoother
other people confirmed this. Try sliding from one desktop to an other with brightness level at minimum and retry it with maximum brightness you'll notice a visible difference
concerning the existing CM12/Mokee 5 roms, these are indeed Android5. But maybe they didn't change the storage to be 100% compatible with existing nubia partition
oh i also forgot, like in previous nubia rom, the UI has no notification access menu... I don't understand why
this is particulary useful if another device needs to read the notifications like a watch or a band... (but you can access it by installing 3rd party tools)
i'm on Cuocu92's modified Android 5 (he added some stuff like multilang, removed some useless apps and added google apps)
but I will switch back to Mokee or Cm12 as soon as they release a working version... the bluetooth and notification switch issue are two point that force me to switch
I do agree that Mokee and CM12 were a bit smoother. However, even when I change brightness from minimum to maximum I don't seem to notice any drastic change in smoothness. Maybe it's the launcher that you use like we talked about in the other thread. I agree with you on the notification access menu, that's a pain in the a$$. Interesting about the CM12/Mokee; I've read several places that state otherwise, so I'm not sure what to believe. I also agree, I too will switch back to Mokee or CM12. The FIUI rom has also been having some really nice improvements and I may try that if they switch to 5.0. For me the notification, the button customization, and the themes make me want to switch back.
Have to agree that the UI on 5.0 is pretty laggy even when using Nova launcher which is usually butter smooth their is major frame drops. And it especially gets laggy when brightness adjusts its self if set on auto.
Also at some point the home button stopped working for some unknown reason. I had to use the back button to exit apps. I don't know why some guys say that they don't have a theme engine. I have one on my ROM.
All in all I would not recommend someone using this ROM as a daily driver. Stick to 4.4 or any of the CM12, CM12.1 or Mokee versions.
I happen to have 2 Z7 minis with me and they both had the exact same bugs. I had to revert back to CM12.
i went to new CM12.1
but for people who need GPS => CM12.1 has a broken GPS, no signal, not even one satelite got detecte. Even outside with a clear view. Whereas official nubia can fix whitin 10 seconds inside ...
chalimoja said:
Have to agree that the UI on 5.0 is pretty laggy even when using Nova launcher which is usually butter smooth their is major frame drops. And it especially gets laggy when brightness adjusts its self if set on auto.
Also at some point the home button stopped working for some unknown reason. I had to use the back button to exit apps. I don't know why some guys say that they don't have a theme engine. I have one on my ROM.
All in all I would not recommend someone using this ROM as a daily driver. Stick to 4.4 or any of the CM12, CM12.1 or Mokee versions.
I happen to have 2 Z7 minis with me and they both had the exact same bugs. I had to revert back to CM12.
Click to expand...
Click to collapse
I agree now and finally see what people are talking about. Certain apps have really slowed down. It's apps that I don't use very often, but it's getting to be annoying. Going to give the new CM12 a try.
alain57 said:
i went to new CM12.1
but for people who need GPS => CM12.1 has a broken GPS, no signal, not even one satelite got detecte. Even outside with a clear view. Whereas official nubia can fix whitin 10 seconds inside ...
Click to expand...
Click to collapse
Can anyone help me? I was trying to flash the new CM12.1 using TWRP and in the middle of it the phone went black. Now I can't turn it back on, can't do anything. Ideas anyone? This sucks. Fortunately, I just did a backup of everything, but now the phone won't even power up. I'd appreciate any suggestions. Yes, I had already upgraded to the official nubia beta.
Edit: The phone still won't turn on, whether it's plugged in or not. However, when I plug it into the computer I can see 5 different partitions of various odd sizes with different aspects of the phone software visible.
Edit 2: So I did a hard reset and was able to get back to TWRP. Next I tried wipe data, cache, dalvik and it did the usual trying to format partitions and it kept failing, saying it couldn't access data. I tried flashing CM12.1 and it gave me the same error, although it said it installed successfully. I also flashed gapps. Now I'm waiting for it to boot up.
alain57 said:
i went to new CM12.1
but for people who need GPS => CM12.1 has a broken GPS, no signal, not even one satelite got detecte. Even outside with a clear view. Whereas official nubia can fix whitin 10 seconds inside ...
Click to expand...
Click to collapse
I've been on CM12.1 for almost 24 hours now and have not had this problem. GPS was off by default when I installed it and I had to enable it. I've used G-maps and a couple of other apps that need GPS and all of them locked on within a few seconds.
pedrud said:
I've been on CM12.1 for almost 24 hours now and have not had this problem. GPS was off by default when I installed it and I had to enable it. I've used G-maps and a couple of other apps that need GPS and all of them locked on within a few seconds.
Click to expand...
Click to collapse
did you tried with gps device only settings ?
because maps use wifi and network localisation to have a position even when gps is not turned on
this really makes me crazy...
I installed gps test and it stay a "no fix"
whereas when i restore my nubia 5.0 OS and tried gps test it fix directly
restoring back the CM12.1 got again no fix :/
alain57 said:
did you tried with gps device only settings ?
because maps use wifi and network localisation to have a position even when gps is not turned on
this really makes me crazy...
I installed gps test and it stay a "no fix"
whereas when i restore my nubia 5.0 OS and tried gps test it fix directly
restoring back the CM12.1 got again no fix :/
Click to expand...
Click to collapse
You are correct. I had not tried device only - it does not work. This is frustrating. Off to the Chinese forums to see what they say....
Hey guys I'm using the official v3.01 and I have so many bugs and crashes. Worst of all it crashes when I have an incoming call and sometimes the screen goes dark when I get a call and I can't swipe and answer the phone. Is there anyway to go back to KitKat 4.4.4? Can anyone explain the steps?