Acase anti-glare, anti-fingerprint matte screen protector review - Asus Eee Pad Transformer Prime

So I recently purchased these screen protectors from Amazon. They arrived the day after (standard shipping). The application was quite easy, perhaps because I have a lot of experience with screen protector application. I used gloves and the result was a flawless application with no bubbles or dust entrapped.
However, the screen did lose a bit of it's sharpness. Although the screen now anti-fingerprint, matte with no glare, it doesn't look as sharp as before. Perhaps I'll get used to it as time goes on, like I mentioned, it's hardly noticeable.
One great thing about it is that there's less friction on the fingers when swiping. Much smoother than the screen itself and fingerprints virtually don't stick anymore. The cutout was perfect, both holes are centered and it covers the entire screen, unlike cheaper alternatives which are millimeters short of covering the edges.
In conclusion, the product is great if you're willing to sacrifice some screen sharpness.
4.5/5.0

Does it work with the dock?
Sent from my Transformer Prime TF201 using XDA

I don't have a dock, but the screen protector doesn't have a dock cutout at the bottom.

tonysunshine said:
Does it work with the dock?
Sent from my Transformer Prime TF201 using XDA
Click to expand...
Click to collapse
I have this screen protector for my Prime, and it fits into the dock fine I really like how it cuts down on the glare without sacrificing much clarity. I'd recommend this protector as well.

I use these protectors on almost all my gadgets. The only thing you need to worry about is the package being dusty itself. I find it helpful to dust off the little plastic sheet before attempting an install.
One thing about the firm film type protectors, one spec of dust means an air bubble.

Related

Screen protector needed? Plus other

Firstly with the gorrila glass do I need a protector..?
Second I hear the metal scratches easily so I was thinking of getting a skin protector so I could still use the dock... But the only issue with that is then the dock would be a different color and the dock would end up getting scratches on it
The only screen protectors I have seen are the skinomi brand ones...
Anyone see any others
Sent from my PC36100 using Tapatalk
Something I've seen is quite a nice bag by case logic that let's you use any 10.1 tab with keyboard whilst still in the bag / case. Probably a better option have a look on the case logic website. I travel a lot / fly and that's what I will be getting its perfect.
Screen protector isn't needed with gorilla glass but there will be loads of them out once the Asus Transformer Prime comes out.
Sent from my Desire HD using XDA App
Some screen protectors will help with fingerprints on the glass though. I think a lot of people use them for that reason alone. I hate the way most screen protectors feel so I doubt I will use one. I may grab a skinomi skin though if the amethyst is too purple.
There's no need to "protect" the screen from scratches because of the gorilla glass (but bear in mind this doesn't protect from egregious mishaps).
That being said, I had a SGP Matte screen protector on my GalaxyTab10.1 because I absolutely could not handle the ridiculous amounts of reflection in the screen, and I anticipate I'll get another one for this tablet. The matte screen protectors also give you an awesome tactile feel on the screen, in addition to protecting against fingerprints. The tradeoff is about a 2-5% reduction in screen clarity. For me it was easily worth it.
Look out for a Steinheil screen protector (Ultra Crystal) when it comes out. You don't need one for Gorilla glass but I get one for fingerprint reasons. I have one on the Xoom and it handles finger prints better than bare surface. I've also tried Skinomi and ZAGG for various phones and tablets, but I no longer like the wet application unless it's for skinning.
---------- Post added at 01:52 PM ---------- Previous post was at 01:50 PM ----------
irishtexmex said:
There's no need to "protect" the screen from scratches because of the gorilla glass (but bear in mind this doesn't protect from egregious mishaps).
That being said, I had a SGP Matte screen protector on my GalaxyTab10.1 because I absolutely could not handle the ridiculous amounts of reflection in the screen, and I anticipate I'll get another one for this tablet. The matte screen protectors also give you an awesome tactile feel on the screen, in addition to protecting against fingerprints. The tradeoff is about a 2-5% reduction in screen clarity. For me it was easily worth it.
Click to expand...
Click to collapse
For those that don't know SGP = Steiheil. The matte will be best against fingerprints and glare, but visibility isn't as good, though. Clear is best for seeing the "true" display but bad against fingerprints and glare.
mutiny said:
Look out for a Steinheil screen protector (Ultra Crystal) when it comes out. You don't need one for Gorilla glass but I get one for fingerprint reasons. I have one on the Xoom and it handles finger prints better than bare surface. I've also tried Skinomi and ZAGG for various phones and tablets, but I no longer like the wet application unless it's for skinning.
---------- Post added at 01:52 PM ---------- Previous post was at 01:50 PM ----------
For those that don't know SGP = Steiheil. The matte will be best against fingerprints and glare, but visibility isn't as good, though. Clear is best for seeing the "true" display but bad against fingerprints and glare.
Click to expand...
Click to collapse
To expound on this a bit further, Steinheill makes an Ultra Crystal (it's so clear it's practically invisible, no anti-glare/fingerprint properities), an Ultra Optics (anti-glare/fingerprint, 3~% reduction in screen clarity, my preference), and one in between (inferior imo).
If you google or youtube the iPad equivalents you can find some good reviews of all them compared next to each other. But those in the know will recommend Steinheill/SGP without hesitation because of their outstanding reputation.
And again, I'll throw out my recommendation for the Ultra Optics version. Of course everyone's preferences will be different, but once you've compared the (lack of) glare with one on to a tablet without one you'll never want to go back. It makes the screen more readable without having to crank up the brightness, which always hurt my eyes after extended amounts of use. I found gaming on it easier, as well, because of how smooth gliding a finger on it is.
Yeah the thing is I'm not waiting for a skin/screen protector from another company to come out so I'm just gonna get the skinomi clear screen and skin protector!
Sent from my PC36100 using Tapatalk
Another +1 for SGP Screen protectors. I use them on all my touch screen devices and will be picking up the Ultra Optic for the Prime as soon as it hits.
After using most the major brands, including Skinomi, nothing seems to compare with the SGP covers. They feel just like glass (no annoying drag or stickiness), and their anti-glare / fingerprint properties are pretty impressive. They did make an actual body protector (Skin Gaurd) for the original Transformer, but I have never used that specific product so can't speak to its quality. It also didn't interfere with Docking, was $19, and you can bet they will make one for the Prime as well.
http://www.sgpstore.com/tablets/asus/sgp-asus-eee-pad-transformer-tf101-skin-guard-set-series.html
Sent from my Samsung Galaxy S II
Mr_Armageddon said:
... and you can bet they will make one for the Prime as well.
Click to expand...
Click to collapse
I contacted them a couple of days ago regarding their protectors. Their reply was as follows:
Unfortunately, we don't have any plans of making Screen Protectors for Asus Transformer
Prime as of right now. However, we may change our production plans in the future. Please check our
website for any updates time to time.
Click to expand...
Click to collapse
irishtexmex said:
And again, I'll throw out my recommendation for the Ultra Optics version. Of course everyone's preferences will be different, but once you've compared the (lack of) glare with one on to a tablet without one you'll never want to go back. It makes the screen more readable without having to crank up the brightness, which always hurt my eyes after extended amounts of use. I found gaming on it easier, as well, because of how smooth gliding a finger on it is.
Click to expand...
Click to collapse
Here is the iPad (sorry no Transformer video) compare between the Crystal Clear and the Anti Glare
SGP Steinheil Screen Shield Install & Comparison for iPad
http://www.youtube.com/watch?v=HLUUqQHn68I
SGP STEINHEIL ULTRA CRYSTAL LCD Protector STRESS TEST
http://www.youtube.com/watch?v=6qHORutYKOQ&feature=player_embedded
SGP store for Transformer
http://www.sgpstore.com/sgp-asus-eee-pad-transformer-screen-protector-steinheil-ultra-series.html
ONLY two versions are available for the Eee Pad Transformer
Ultra Crystal - SGP07988
Ultra Crystal screen protector is a clear type where it absolutely doesn’t affect the screen image quality. Ultra Crystal has glass-like coating with the best resistance against scratches.
SGP Asus Eee Pad Transformer TF101 Screen Protector Steinheil Ultra Series [Ultra Crystal] - $22
http://www.amazon.com/SGP-Transform...T73G/ref=sr_1_1?ie=UTF8&qid=1323285253&sr=8-1
Ultra Fine - SGP07989
Ultra Fine screen protector is matte type hard film which resists against fingerprints and smudges, but it is less clear compared to other Steinheil screen protectors.
SGP Asus Eee Pad Transformer TF101 Screen Protector Steinheil Ultra Series [Ultra Fine] - $25
http://www.amazon.com/SGP-Transform...T6XM/ref=sr_1_2?ie=UTF8&qid=1323285253&sr=8-2
Steinheil™ Ultra Series Screen Protector Films
** Made for Asus Eee Pad Transformer TF101
• Perfect fit for Device's Display
• Size to Specifically fit the mobile device
• No Rainbow Effects
• Easy to install / Remove
• Non-tacky adhesive : Removed easily without leaving residue
• Premium Silicon Adhesive : Bubble Free Application
• Easily Wipe away marks and Fingerprints.
• Anti-UV Rays coated
• No Interference with Touch-Screen Responsiveness
• Base Film Made in Japan
• Finished in Korea
• Manufactured by SGP in California, USA.
Ultimate Transformer PRIME TF201 Accessory Guide
http://forum.xda-developers.com/showthread.php?t=1377669
I will probably go nekkid, I really dislike screen protectors and I have put one on my fascinate and removed it a couple days later, with gorilla glass I haven't had any scratch issues even carrying in my pocket with keys and my prime won't have to go against any of that
Just grabbed a Skinomi TechSkin screen protector for $15 on Amazon. I know Gorilla Glass doesn't really need "protection", but I am terrified of damaing the screen in any way. Opted for the normal TechSkin over the DryTech after speaking with their Customer Service and verifying that the TechSkin feels more like a glass surface, aka no drag or friction.
I usually install SGP protectors, and really want the Ultra Optic protector for its anti-glare / fingerprint attributes, but until they are released for the Prime, this was cheap enough to hold me over.
I have a Sensation with Gorilla Glass and I don't use a screen protector at all. I've purposely scraped knives and scissors on my screen to prove a point to friends about the glass. It's good stuff. It's not indestructible like putting too much weight on it) but it's certainly enough to keep the screen protected against keys in my pocket and what not.
As for smudges from your hands, I don't have any experience myself with anything that supposedly reduces that, but I don't have too many smudges on my phone and they wipe off easy (thanks to Gorilla Glass being so tough). I'm skeptical about any layer you can put on the screen that prevents smudges and finger prints. Oil is oil. I'm really careful about what I eat before touching the phone because even a carrot leaves stuff on your fingers that get on your screen.
One of my favorite touted features of the Prime is that it is "hydro-oleophobic", which means there is a special coating on the screen and casing to make it resistant to water/oil/smudges. Perhaps this in combination with the Gorilla Glass will alleviate the need to install a screen protector?
It has been my experience that screen protectors do reduce the sensitivity of a stylus. So initially I'm going to be brave and use the Prime without a screen protector, as I really want to use it for note taking and drawing with a stylus.
Gary_O said:
One of my favorite touted features of the Prime is that it is "hydro-oleophobic", which means there is a special coating on the screen and casing to make it resistant to water/oil/smudges. Perhaps this in combination with the Gorilla Glass will alleviate the need to install a screen protector?
It has been my experience that screen protectors do reduce the sensitivity of a stylus. So initially I'm going to be brave and use the Prime without a screen protector, as I really want to use it for note taking and drawing with a stylus.
Click to expand...
Click to collapse
I hate to be the bearer of bad news but that coating your talking about i just didnt see it on the Prime.When i played with the display model at Gamestop the screen had plenty of fingerprints and smudges.Yet the screen was still beautiful.Goes to show u that a clean screen will be amazing.
bigaj said:
I hate to be the bearer of bad news but that coating your talking about i just didnt see it on the Prime.When i played with the display model at Gamestop the screen had plenty of fingerprints and smudges.Yet the screen was still beautiful.Goes to show u that a clean screen will be amazing.
Click to expand...
Click to collapse
Well of course it would because it's a display model! Lol
But I'm gonna tell you that the display unit probably had some sort of protector on it!
Sent from my PC36100 using Tapatalk
Screen protector is still a good idea. It's gorilla glass, but its still glass. Any common sand still has a higher hardness of glass. Just something to keep in mind.
Sent over Al Gore's internet via a rooted Thunderbolt.
Personally, I don't think I'm gonna get a screen protector. Seems silly, as gorilla class is awesome - very happy with my gs2 (though I did drop it straight on the concrete and it got chipped lol...but no crack). Im mot too upset with finger print marks. I'm thinking about picking up one of those sub 10$ tablet cases on amazon!
Sent from my SPH-D710 using Tapatalk
andddlay said:
Personally, I don't think I'm gonna get a screen protector. Seems silly, as gorilla class is awesome...
Click to expand...
Click to collapse
Gorilla Glass is awesome, but not indestructible. My wife's Samsung Infuse is only 3-4 months old, and there are a few scratches on the gorilla glass screen.
Granted, I have kids that sometimes get ahold of her phone, but I definitely want something to gaurd against any possibility of scratches on the Prime. Will be rocking a Skinomi until SGP releases their protectors for this device.
Sent from my Samsung Galaxy S II
Should I get antiglare or clear? What do you guys like better?

[Review] Anti-Glare, Anti-Fingerprint screen protector from Acase

The Product:
http://www.amazon.com/gp/product/B006QG47YW/ref=oh_o00_s00_i00_details
The Review:
Well, like many TF201 owners, I suffer from disappointment with the glossy finish on the Prime's screen. It's hard to show off your tablet/laptop hybrid when you open it up and it's covered in oil from our fingers. Luckily, Acase has a solution.
This screen protector does exactly what it is described to do:
1-Protects the screen (yes, it's "gorilla glass" but that doesn't mean it's beyond extra protection)
2- applies a matte finish to the screen
3- drastically decreases the presence of fingerprints
I can officially say that this product was applied by ME (and I have no professional training in applying screen protectors) and the application process went well with no dirt/dust/bubbles.
They ship the screen protectors in a box which is nice because it helps protect from any bending that could occur en route.
The only con I can think of at this point is the same con you'll get on any matte screen protector, the screen does lose a little clarity. In my opinion, however, the loss in clarity is not enough to even care about.
In conclusion, if you want a solution to the glossy screen and the presence of fingerprints, I highly recommend this product. I am pleased with my purchase and the product is working the way it should.
The Pictures:
http://dl.dropbox.com/u/31210960/Pictures/20120308_093925.jpg
http://dl.dropbox.com/u/31210960/Pictures/20120308_093957.jpg
http://dl.dropbox.com/u/31210960/Pictures/20120308_094029.jpg
Looks great. Sounds good too. I'm curious how the screen feels, same as without the protector? Just curious if it hinders sliding the fingers much.
Sent from my Transformer Prime TF201 using Tapatalk
I wonder what the longevity is of this anti-glare screen protector.
In my experience after a few months the texture gets worn smooth in spots from repeated finger rubbing. Also after a few weeks they get "gummy" and lose some of their fingerprint resistance while at the same time becoming a bit more difficult to clean.
Also, how does this skin work with styli?
I am currently switching between the Griffin GC16040 and the Jot Classic. Does a skin like this one reduce the sensitivity of a stylus significantly? The Jot in particular is very much affected even by smooth screen protectors.
almightywhacko said:
Also, how does this skin work with styli?
I am currently switching between the Griffin GC16040 and the Jot Classic. Does a skin like this one reduce the sensitivity of a stylus significantly? The Jot in particular is very much affected even by smooth screen protectors.
Click to expand...
Click to collapse
I'm writing this with the Acase stylus and anti-glare protector. The stylus seems to be just as responsive now just like before applying the screen protector. The protector does take away some brightness; however, I'm not having to clean the screen every 5 minutes. I highly recommend it.
SirFenwick said:
Looks great. Sounds good too. I'm curious how the screen feels, same as without the protector? Just curious if it hinders sliding the fingers much.
Sent from my Transformer Prime TF201 using Tapatalk
Click to expand...
Click to collapse
In my opinion, I like how my finger slides better with this screen protector than without it.
My hypothesis is this:
Since the screen protector repels oils, I'm assuming that there isn't a layer of accumulated oil between the finger and the screen, thus allowing for better movement upon the screen.
Also, my Minisuit stylus works quite well with it. I would say it works just as well as without a screen protector.
I'm pleased with this purchase.
bscotth said:
In my opinion, I like how my finger slides better with this screen protector than without it.
My hypothesis is this:
Since the screen protector repels oils, I'm assuming that there isn't a layer of accumulated oil between the finger and the screen, thus allowing for better movement upon the screen.
Also, my Minisuit stylus works quite well with it. I would say it works just as well as without a screen protector.
I'm pleased with this purchase.
Click to expand...
Click to collapse
This type of screen protector doesn't repel oil at all. In fact over time most of them will absorb oils from your hand.
The reason that your finger slides easy is that the surface is textured which reduces the surface area that you finger actually makes contact with, which in turn reduces friction.
Incidentally the texture is the same reason why fingerprints show up less easily, since some of the oils from your fingers will slip below the highest surfaces of the screen protector so that you don't see it.
However like I said in my other post, textured screen protectors tend to get worn smooth after a few months of regular use, which makes me wonder how long this one will last.
Keep us posted!
Thanks for the review.. though about a week too late!
I ordered the minisuit anti-glare / anti-fingerprint.. guess we'll see if it's much different than the Acase stuff when it comes in in a few days.

[Q] Suggestion on screen protector?

Hey guys,
Looking for a quality, wet-apply, non rubbery feel screen protector that is compatible with the dock (either cutout, or thin enough to not impede dock usage). Any suggestions?
I have tried multiple screen protectors on multiple devices and never really been satisfied as they reduce the responsiveness of the screen and usually peel off over time. This device has Gorilla glass, so I don't believe a screen protector is required.
Sent from my Desire Z using the XDA App
David Dee said:
I have tried multiple screen protectors on multiple devices and never really been satisfied as they reduce the responsiveness of the screen and usually peel off over time. This device has Gorilla glass, so I don't believe a screen protector is required.
Sent from my Desire Z using the XDA App
Click to expand...
Click to collapse
been the same for me, never really been happy with the feeling / lack of response using them so always come off.
I have a Skinomi skin (tablet + dock) and am pretty happy with it. You can also use skinomi25 for a 25% discount.
I've never had any other type of skin though, so I can't really compare.
I've heard people say that the Skinomi skins have a rubbery texture though. Is that the case in your experience?
Dont buy a screen protector it's pointless. Gorilla glass is amazing
Sent from my Gnex
No offence, and I appreciate the suggestions, but I wasn't asking whether or not I should get a screen protector, but whether there's a screen protector that fits the criteria I want.
have had no problems with zagg... can see where it sits in the dock when not connected, but great otherwise
Sent from my Transformer Prime TF201 using xda premium
Skinomi is good +1 on that. Running full body protection + full body keyboard protection. While yes corning gorilla glass shouldn't scratch but better to be safe than sorry. Especially if your carrying it inside a bag and such.
Both Skinomi and Zagg screen protectors are rubbery. Skinomi is less rubbery than Zagg but neither are really unnoticeable when applied. Most matte screen protectors won't be rubbery but they will alter the look of your screen slightly.
Some people swear by the A case matte screen protector http://www.amazon.com/Transformer-1...47YW/ref=sr_1_2?ie=UTF8&qid=1333282964&sr=8-2
In general though, the look and feel of a screen protector is a very subjective thing so you may have to try a few before you find one you like.
Know you're asking about wet-apply, but I use the Elecom TB-ASTF201FLBS, and am really pleased with it so far.
Course, I haven't used the prime without it, so I wouldn't know whether there's less sensation than doing it in the buff. Imagine we'll get around to that after we get to know each other better...
But looking on Amazon.com, I'm not sure you can get this outside of Japan.
I bought this off of ebay in January even before I got my Prime, I usually was concerned about wet-apply as I'd never used it before.
It looks like the bubbles will stay at first, but push most of them off with a credit card, wait 48-hours and I promise you the water/soapy look underneath and all of the bubbles disappear.
I love it, doesn't feel super rubbery, and it seems just as responsive.
http://www.ebay.com/itm/NEW-Asus-EE...ccessories&hash=item35b83249d4#ht_2417wt_1139
coachcory said:
have had no problems with zagg... can see where it sits in the dock when not connected, but great otherwise
Sent from my Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
I agree with coach. I've had a Zagg Invisible Shield on my HTC Aria since the first week or purchase. It works as advertised, keeps the screen protected and scratch free.
HOWEVER, personally, Zagg does have a rubbery feel and as everyone else mentioned, will reduce screen sensitivity.

Screen protector recommendation?

I am mainly concerned about fingerprints and smoothness of the operation. Clarity is an important factor also so appears matte finish isn't what I'm looking for since you have that moire over text and such. What would be the optimal screen protector?
Skinomi. Awesome and very easy to apply. They also have the best customer service support!
I actually messed up while applying my screen protector and they sent me a new kit within 2 business days.
Where to get it: Amazon, nuff said.
Thanks for the tip. I think I'm going to try something cheapo like this just so my mother can see if she can live with a matte finish for about a week.
http://www.amazon.com/Anti-Glare-Sc...sformer/dp/tech-data/B005OUE8R2/ref=de_a_smtd
If she finds she can I will find a good high product one.. if not I will go straight with Skinomi most likely than. But I think buying a cheap matte one so she can experience and anti-glare, anti-fingerprint (most critical is fingerprint reduction) than she can make an intelligent decision without blowing $15 just to find she does not like it.
I tried the Zagg and it was a disaster. Application was messy and I personally didn't like the grippy feel. I just got my BodyGuardz put on a couple days ago though and I love it. I bought the combo carbon fiber skin/HD anti-glare screen protector and it's fantastic. Nice feel and definitely cuts down on glare and fingerprints.
Also, if you find them on facebook and post "BodyGuardz Me!" on their wall, they'll send you a 30% off coupon code.
Skinomi
Skinomi wet-apply screen protectors are pretty easy to apply, however they are grippy (like the Zagg's) and 'soft' as in an your fingernail can easily and accidentally leave an indent on the screen protector. It feels almost too soft, where things that leave an indent on the screen protector would never even damage the Gorilla Glass underneath.
Good thing is because it is soft like rubber, most indents un-indent themselves after a while.
Screen Protector
got my screen protector for my Asus Eee Pad made by http://secondshells.com/screen-prot...n-protector-anti-glare-anti-finger-print.html I ordered the anti-glare screen protectors through SecondShells. I have used simply because the touch screen did not lose any sensitivity after I applied it.
The protector had a nice rectangular notch cutout for the camera and for the light sensor(I think that's what it is), I had purchased other protectors and they had these small circular holes, you had to be perfect to install it right, this larger opening made my life a lot easier. Overall very easy to apply, a peel and stick type of protector, with protective covers.. I am very happy. I also recommend getting a stylus like the nano fiber stylus I also ordered from SecondShells responds great with my tablet. http://secondshells.com/touch-stylu...n-with-nano-fabric-retractable-tip-black.html
The Skinomi is nice. Just installed it today. It doesn't reduce glare but the touch is nice. I only wish it were oleophobic...
Sent from my Transformer Prime TF201 using XDA Premium HD app
I installed the Ghost Armor clear front an back on mine and love it. It is a little bit grippy, but no where near as bad as Zagg, which I can't stand!! Ordered mine direct from them for less than $35 shipped. Install is your standard wet install which is super easy in my opinion. Clarity is great and does NOT have the orange peel look like Zagg does. The full body kit comes with front, back, and even pieces to cover the sides. True full body protection!!! They offer many different colors for the back including carbon fiber. http://www.ghost-armor.com/Asus/743.html
I've never been able to get the wet app to work successfully. That's why I chose the dry application secondshells offers.

TF300 Screen Protectors

Have had the TF300 for about a week and just cannot stand the fingerprints and worries about scratches. I'm used to Gorilla Glass and this is driving me nuts. I've been researching screen protectors quite a bit and cannot seem to get a consensus on a certain brand. I know the selection for the TF300 right now is slim, but given what you've used on earlier devices, what is a good brand to go with?
I have it in a case (Caseen Designo), but would like an extra layer of protection.
I've had good experiences with SGP's Steinheil screen protectors. I've used both the clear ones as well as the matte glare reduction/smudge resistant models and have been happy with both. The usual reduction in clarity is in the matte protector, but the cut was very precise and it lasted me a year before i took it off because i missed the crisp picture of the IPS panel, the protector was still pristine.
I just keep a microfiber and a small credit card style sprayer with 50/50 alcohol and water mix in the bag that i keep the tablet in, and its been alright so far, if you keep it in the dock most of the time you shouldn't have to worry about it being scratched unless you drop it or something, which i have yet to do since i also have a skinomi techskin on the back so its nice and grippy.
SGP doesn't make a protector for the TF300 yet, but i'd keep an eye on it, they make some solid products.
screen size is same as prime so protectors made for the prime should work.
johnjohnjohnson said:
screen size is same as prime so protectors made for the prime should work.
Click to expand...
Click to collapse
You may want to check camera and light sensor placement before you put a prime screen protector on. They may be the same but it never hurts to check
Nothing else will work with the TF300 unfortunately.
I've been researching like crazy and think I've narrowed it down to:
Zagg
Stenheil
XtremeGuard
Those seem to get the best reviews. I'm really looking for:
same feeling as naked screen
optimal clarity
mitigates fingerprints
If you've never felt a zagg's wet apply film before i suggest you find someone who's got something similar to it and try it first, i see one of the criteria is feel close to naked screen, zagg and other wet apply soft skins usually feel grippy when you first install it, and gradually over time will wear out and feel smoother. In general there are the wet apply films which feel a bit like vinyl except its clear, or the dry apply protectors which are harder pieces of plastic, those will feel closer but nothing will be quite like a naked screen.
Is there big difference on screen sensitive between glossy and matte screen protector? or just you see difference of screen quality...
Thanks
I almost wonder if I might just be better off with a naked screen. I have my TF300 in a Caseen leather case and am always very careful when it's in use. The only thing I'd like to mitigate is the fingerprints.
Wait for a ClearCoat screen protector....i have tried every other brand and there is NOTHING like them. Super thin, no spongey feeling or orange peel....
I bought the xtremeguard one on ebay for 8.99 It fits great. The one I got isn't anti-glare though. One thing that kind bothers me, since I have never used a screen protection before, is that my fingers don't glide as easily as in the glass, it shows a bit of resistance. But I guess I just got to get used to that. I have not seen a reduction in screen sensitivity as of yet, but my dagi stylus kinda sucks now with the screen protector T_T since its plastic on plastic the resistance is really bad.
I like my skinomi. it takes forever to apply since it's wet application and if you're OCD about bubbles/lint like me. But once you've got it on there perfect and wait for it to dry and clear up it's not bad at all +lifetime guarantee.
I've always liked wet applications over the adhesive/static stuff just because they last a long time, and I havent noticed the yellowing people have talked about on any of my devices, I agree about the stylus issue, though (jot pro)
+1 for skinomi...
I used to swear by Zagg ...
Skinomi has only a slight orange peel effect and is generally smother except I agree it is still a nogo for the Jot pro as it doesn't let the plastic disk glide
after a while the Zagg invisible skins would start to keep my finger from sliding properly...
Skinomi skins do not have this issue and they dont show finger smudges very much
I want to try the Zagg HD skins as they are supposed to be glass smooth but they seem to only be out for iProducts and the kindle fire.....
rj7766 said:
+1 for skinomi...
I used to swear by Zagg ...
Skinomi has only a slight orange peel effect and is generally smother except I agree it is still a nogo for the Jot pro as it doesn't let the plastic disk glide
after a while the Zagg invisible skins would start to keep my finger from sliding properly...
Skinomi skins do not have this issue and they dont show finger smudges very much
I want to try the Zagg HD skins as they are supposed to be glass smooth but they seem to only be out for iProducts and the kindle fire.....
Click to expand...
Click to collapse
It would be cool if the Zagg HD worked with plastic disk styluses
aelunyu said:
I like my skinomi. it takes forever to apply since it's wet application and if you're OCD about bubbles/lint like me. But once you've got it on there perfect and wait for it to dry and clear up it's not bad at all +lifetime guarantee.
I've always liked wet applications over the adhesive/static stuff just because they last a long time, and I havent noticed the yellowing people have talked about on any of my devices, I agree about the stylus issue, though (jot pro)
Click to expand...
Click to collapse
the lifetime warrenty requires you to pay for shipping and handling by paying for the shipping and they also ask that you put your cc# on a paper and send it in. kinda risky there.
mrevankyle said:
You may want to check camera and light sensor placement before you put a prime screen protector on. They may be the same but it never hurts to check
Click to expand...
Click to collapse
just got the bestskinsever protector for the prime and size is the same and cut out for camera is in the right spot. should be good to go on other protectors made for prime.
jgaf said:
I bought the xtremeguard one on ebay for 8.99 It fits great. The one I got isn't anti-glare though. One thing that kind bothers me, since I have never used a screen protection before, is that my fingers don't glide as easily as in the glass, it shows a bit of resistance. But I guess I just got to get used to that. I have not seen a reduction in screen sensitivity as of yet, but my dagi stylus kinda sucks now with the screen protector T_T since its plastic on plastic the resistance is really bad.
Click to expand...
Click to collapse
This will pass eventually from wear, on my zune hd i used to have an invisible shield which is a similiar kind of wet apply soft protector, and eventually the center part wore down enough to where it was like a hard plastic protector.
You bring up a good point though that i forgot to mention, i've used matte hard protectors, clear hard protectors, and soft wet apply films and my adonit jot still works best on a naked screen, though the matte hard protector had more of a paper resistance to it and the clear and naked both were much smoother.
Szpaner: the touchscreen sensitivity for me was largely the same between a clear hard protector and matte hard protector, i wasn't able to glide as well with the wet apply film so i wasn't able to gauge properly how sensitive it was compared to the other two.
mfratella: a light coat of rain-x on the naked screen helps make it much easier to wipe clean, i can breathe on it once or twice and the condensation is good enough to clear the whole screen. Even with the matte hard protectors which are supposed to be designed to be anti-fingerprint, they will still show up eventually from the oils in your finger, those spots will end up being a little more transparent so you'd have to wipe anyway, though in my experience the matte ones are the easiest to wipe, i used to just use my sleeve and give it a once over and it was all clean.
szpaner6 said:
Is there big difference on screen sensitive between glossy and matte screen protector? or just you see difference of screen quality...
Thanks
Click to expand...
Click to collapse
When I've used a matte screen protector, I didn't notice any difference in screen sensitivity. The biggest difference is in the clarity of the screen. On a phone, I can deal with the graininess that a matte screen protector brings with it. But on a tablet with a large screen, something that I'm going to use for long periods of reading, it's far too distracting for me. Personally, I'd rather work around glare now and then along with wiping off finger prints in exchange for a clearer screen.
Screen protectors compatible with dock?
The Armorsuit people replayed on an email I sent them asking if their screen protector was compatible with the keyboard for the TF300.. it appears it is not. They answered me just to be careful... so I was planing on cuting it. these screen protector is actually pretty good, and I think that I wont even notice the protector end-line at the bottom of the screen after a while. Do you know if cutting it actually works?
I just installed the Skinomi on mine. Took about 5 minutes and it's perfect. Just gotta makes sure you soak the hell out of the screen (you won't damage it) and both sides of the protector plus your hands so that you don't leave finger prints on the adheasive. If you have enough of the solution on everything it should kinda float on the surface of the tablet. You can just very easily slide it around until it is center and then start pushing the water out to make it stick. I didn't have one bubble on mine when completed.
The Zagg is now avail at best buy . No issues with the stylus either. Now all i need is a case im comfortable with.

Categories

Resources