4.0.4 ics rom - Samsung Galaxy Player 4.0, 5.0

Having trouble with the ICS 1.3 ROM, I've downloaded in both Linux & Windows 7, and getting file verification error when I try to flash this ROM. File loads ok in recovery mode, but aborts install midway during verification. Bad file link?

Related

rom manager

hi , i used rom manager to download the miui rom 1.7.15 .
when i try to run install the rom from the sd card using rom manager .
when i ask it to back up current rom and wipe cache etc the phone reboots ,starts the installing then it comes up with
E:failed to verify whole-file signature
E:signature verification failed
installation aborted
im sorry but i am new to all this ,what am i doing wrong ?
any help would be great thanks
You are rooted and you have flashed back the Stock kernel also to get rid of the Yellow Triangle, but you haven't flashed the Zimage from the rooted kernel, so go on and do it.
Regards.
Sent from GT-I9100
im sorry i was under the impression that you could just install it straight from rom manager .
i have now flashed back to the stock kernel ,now i just need to find a link showing me how to install the zimage
thanks

[Q] sgs2 rom issue

hey guys can some one help me out.
i bought a stock sgs2 from bell in canada had it unlocked and is now on rogers. i wanted to load some custom roms so i used a root file cf root ugks2 and it roots my phone gave me super user and cwm which was good. i tryed to load mods useing instructions with rom manager and with cwm and i was getting this error
---installing package...
finding update package...
opening update package...
verifying update package...
e:failed to verify whole-file signature (in red letters)
e:signature verification failed (in red letters)
installation aborted
so some guy told me to load theases files for my phone
in .pit put u1_02_20110310_emmc_EXT4.pit
in pda put CODE_I9100XXKI3_CL577579_REV02_user+low+ship.tar.md5
in modem put MODEM_I9100XXKI3_REV02_CL1062028.TAR.MD5
in csc put GT-I9100-CSC-MULIT-OXAKI3.TAR.MD5
so i put thoses file in to odin 1.85 and bam once they load it works great then i i load in to the odin pda file CF-ROOT-SGS2_XX_OXA_KI3-42-V4.2-CMW4.TAR once i load that file i have a rooted phone with cwm and super user installed
i was told once i do that i should be able to load any rom. i have tryed several. i download the rom and once its downloaded i make sure usb debugging it on and connect the usb to the computer. keis is not running. i copy the rom i downloaded to the internam sd card of the phone. shut the phone off. use the vol up menu and power off buttons to bring the phone to cwm main menu. i then wipe the cash wipe the data factory reset and even wipe the battery status and other cash. then i select the install from sd card locate the file and install. its goes through the process but never installs correctley. depending on the rom it just flashes the main samsung screen and yellow triangle or its freeses there or tells me i cant mount e: with a pile of error messages. then i have to put the ohone back into download mode and go into odin and reload the files i listed above and cf file after.
my phone is currently running
android 2.3.5
baseband vr i9100xxki3
kernel vr 2.6.35.7-i9100xxki3-cl577579 [email protected] #2
build number gingerbread.xxki3
can any one figer me out please im about to smash this phone lol all i want is a cool nice look custom rom thats it thats all some thing that looks flash fast and reliable i would appricate any help!!!!!!!!!
Did u follow this guide?: http://forum.xda-developers.com/showthread.php?t=1193695
Go to clockworkmod recovery toggle signature verification to disabled.
Then try flashing a rom.
Also try odin flashing a different kernel with root.
What rom ur trying to flash ?
rom
yes i tryed thoses files i load odin and put thoses files in there proper place and start when the phone boots i get a bunch of errors and stuff saying cant mount e
and as for the roms i have tryed several litein rom cm7 baltista and none will load i am so confused
ok so i downloaded the stock bell pda phone and csc file but y is there no pit file? is that why i cant get any thing to work cuz i dont have a pit file?
when i restore the phone to the xxki3 thats works for me i have a pda csc and modem file as well as a pit file is that what im missing here in this combo?
never use pit file dont know how your galaxy survived
well its the only that that makes it work again after i test some other file
i think i have figered out my issue the reason i cant flash back to stock bell firmware or any roms is because the xxki3 firmware i downloaded was a tar package which contained a bootloader file. apparent (correct me if im wrong) but that bootloader package had checksums in the firmware which only alows me to boot my phone with the xxki3 firmware. so does this mean i cant change and im stuck with this software? is it possible to get bells stock firmware but is it possible to get the stock bootloader file? or am i just plane screwed and should be luck that at least my phone still works?

Problem Installing a custom rom

Hi all
I have been trying to root my galaxy s2 GT 19100 so I can install a custom rom for a few days now but I keep getting this error message:
Using JB 4.1.2
E:Error in /tmp/sideload/package.zip
(status 7)
I have tried doing this with odin 3.07 but for some reason the .zip files aren't showing up when trying to select the rom.
I have the roms in a folder on my desktop /s2 roms in zip format.
I always run odin as admin.
I am running Windows 8.1 and I have already checked folder options to showw all files.
Any suggestions much appreciated.
smudger1767 said:
Hi all
I have been trying to root my galaxy s2 GT 19100 so I can install a custom rom for a few days now but I keep getting this error message:
Using JB 4.1.2
E:Error in /tmp/sideload/package.zip
(status 7)
I have tried doing this with odin 3.07 but for some reason the .zip files aren't showing up when trying to select the rom.
I have the roms in a folder on my desktop /s2 roms in zip format.
I always run odin as admin.
I am running Windows 8.1 and I have already checked folder options to showw all files.
Any suggestions much appreciated.
Click to expand...
Click to collapse
did you try to flash the rom in a custom recovery like CWM? if not do that. And redownload the custom rom maybe it was a download fault.
And one more thing, that file is not made to flash with odin but in recovery mode :highfive:
Did you have working custom recovery aka cwm before flash custom rom?
Which rom you are running on your phone? Is it Stock Rom?
If Stock rom you have install CWM.
On odin you only update Stock rom (Ex;4.1.2 Stock) thought a file (.tar).
You have looking for CWM 6.x.x .tar and then you can install through Odin.
After install, go to CWM by holding Power + Volume Up + Home and then install zip file

[Q] [Xperia U] Device bricked

Hi, I was trying to Install XperiaSTE Build 9 Android 4.4.3 CM11 Nightlies in my device. Before I start, I took a CWM Backup from ICS 4.0.4. After the rom zip downloaded, I extracted the boot.img from the zip, Then copied the rom zip to a folder inside my sdcard/internal. After I fastbooted the boot.img and unpluged the device, I just ran the CWM in device. It was not working cause my zip is probably broken. error is:
E:Can't open /storage/sdcard0/Downloads/cm-11-20140608-UNOFFICIAL.zip (bad)
Installation aborted.
I tried to restore my backup, But on restoring system it just says:
Error while restoring /system!
I've tried fastbooting ICS Default kernel for XU, but it just get's stuck in Sony boot loader logo.
I've also tried CWM adb sideload, It just errors: Device not found. Is there any way I can push a re-downloaded zip to my device? I have 80mb free space, If there's also any way I can delete the old broken ROM It would be awesome
Please help
Thanks!
!!!WARLOCK!!! said:
Hi, I was trying to Install XperiaSTE Build 9 Android 4.4.3 CM11 Nightlies in my device. Before I start, I took a CWM Backup from ICS 4.0.4. After the rom zip downloaded, I extracted the boot.img from the zip, Then copied the rom zip to a folder inside my sdcard/internal. After I fastbooted the boot.img and unpluged the device, I just ran the CWM in device. It was not working cause my zip is probably broken. error is:
E:Can't open /storage/sdcard0/Downloads/cm-11-20140608-UNOFFICIAL.zip (bad)
Installation aborted.
I tried to restore my backup, But on restoring system it just says:
Error while restoring /system!
I've tried fastbooting ICS Default kernel for XU, but it just get's stuck in Sony boot loader logo.
I've also tried CWM adb sideload, It just errors: Device not found. Is there any way I can push a re-downloaded zip to my device? I have 80mb free space, If there's also any way I can delete the old broken ROM It would be awesome
Please help
Thanks!
Click to expand...
Click to collapse
I'd go for a ftf file with a stock ICS again and flash it through flashtool (flash mode).
You know, just to get the device running properly and then push your custom rom again.
Just flash the kernel that you have at the beginning or a kernel with cwm
Inviato dal mio Xperia Sola utilizzando Tapatalk

[Q] CWM Recovery gives an error while installing GAPPS! Help!

Hi! I've recently installed on a SGS3 CyanogenMod 11 with 4.4.4 Kitkat. Now I'm trying to install the GAPPS pack but when I select the zip file from the CWM Recovery menu it abort the installation saying "file_getprop: failed to stat "/system/build.prop": No such file or directory"
You can find the image with the error at the end of the post. Thanks!
Do you have the newest recovery??
Or try to download another GAPPS. This can be broken
The file might be corrupted, try another ggapp if you have the latest version of CWM.

Categories

Resources