Tablet P (JP 3G+WIFI), I can download smoothly, but failed in updating which say ERROR CODE 11. What is the problem?
Are you stuck now?, Does your tablet reboot?, and if not can you reboot into recovery?, if so you can factory reset your tab, as far as i know you won't loose any personal stuff like music and pictures but you will loose your own dowloaded apps, but if you checked with you gmail account that google will backup your settings etc.
Mahaco said:
Are you stuck now?, Does your tablet reboot?, and if not can you reboot into recovery?, if so you can factory reset your tab, as far as i know you won't loose any personal stuff like music and pictures but you will loose your own dowloaded apps, but if you checked with you gmail account that google will backup your settings etc.
Click to expand...
Click to collapse
Thanks for your reply. But I still have prolem as below,
1/ The updating process ended every time in "verify version" process, I think the ROM has't started writing;
2/ My Tablet P is 211JP version, but once I rooted and change region through AllInOne 3.2, if this will impact the verification
Looking forward to your feedback.
Mahaco said:
Are you stuck now?, Does your tablet reboot?, and if not can you reboot into recovery?, if so you can factory reset your tab, as far as i know you won't loose any personal stuff like music and pictures but you will loose your own dowloaded apps, but if you checked with you gmail account that google will backup your settings etc.
Click to expand...
Click to collapse
BTW, I can enter recovery mode, but I failed in writing exteral ROM through SD. Even I tried factory reset, but I get same result in updating (ERROR CODE11).
....
me the same . i have code 11too . i also used aio to change region
Trueloveice said:
me the same . i have code 11too . i also used aio to change region
Click to expand...
Click to collapse
So, what is your situation currently?
Okay, so tell me evertything which is possible right now,
Can you boot normally?
Do you have Honeycomb rooted?,
Did you do the rescue-backdoor?
etc.
Cause if can get into recovery like you said, and you have Root, then you can try to download the Honeycomb 3.2.1r2 by your PC and transferr in to you SD card and try to flash that update, wait.. i set you an order to try to downgrade to Honeycomb, because your tab is in fact updated, but not with Pre-root i'm affraid,
Code:
1. Boot into RECOVERY;
2. Flash 3.2.1r2 update zip;
3. During flash tablet will reboot 3 or 4 times, with 'green dots' screen.
Just before last 3rd dot reboot you've got to hold VOL+ button,
to get to RECOVERY just after flashing complete! IMPORTANT!;
4. Wipe device;
5. DONE.
[I]Wipe just after flash is very important, because if you will not gonna do this,
then it will be bootlooped in start animation, after wipe will boot correctly,
but after another reboot it will gonna boot again into ICS!
So if you will not gonna wipe just after flash, then just start all over again.[/I]
---------- Post added at 03:29 PM ---------- Previous post was at 03:28 PM ----------
bluesoul80 said:
So, what is your situation currently?
Click to expand...
Click to collapse
Ehh yess want to know that 2
huh...
I think it's the region problem . In the AIO3.2 there is no such file as tablet p regions. so ...... we just change a part of the region, not all that.
Related
i am from india after updating ics by this forum method i can coonect to wifi but cant browse internet pls help
empty cache from the browser and reboot if needed then try again,
if that doesn't work reflash your zip, and you'll be fine.
Mahaco said:
empty cache from the browser and reboot if needed then try again,
if that doesn't work reflash your zip, and you'll be fine.
Click to expand...
Click to collapse
thanks sir but when i trying to reflash it says verification failed.
Thats unusual,?
Ok first .. did you try to do a Factory reset?, try to do that first.
If your browser still not work then i advise you to send condi a pm by this link:
Condi PM
Maby he can tell you how to reinstall the update.
Mahaco said:
Thats unusual,?
Ok first .. did you try to do a Factory reset?, try to do that first.
If your browser still not work then i advise you to send condi a pm by this link:
Condi PM
Maby he can tell you how to reinstall the update.
Click to expand...
Click to collapse
evrything is trying ..in reflash mode after flashing recovery that bar does not move above 3 dots
i cant pm newbe
drsarangaa said:
evrything is trying ..in reflash mode after flashing recovery that bar does not move above 3 dots
i cant pm newbe
Click to expand...
Click to collapse
Pls suggest me how to reflash or downgrade. I m having root.
Oh yeah ofcourse sorry xD
Ok, maby this works but you need the Honeycomb Update zip on your Tablet:
Code:
1. Boot into RECOVERY;
2. Flash [I][U]3.2.1r2[/U][/I] update zip;
3. During flash tablet will reboot 3 or 4 times, with 'green dots' screen.
Just before last 3rd dot reboot you've got to hold [B]VOL+[/B] button,
to get to RECOVERY just after flashing complete![B] IMPORTANT[/B]!;
4. Wipe device;
5. DONE.
[SIZE="1"]Wipe just after flash is very important, because if you will not gonna do this,
then it will be bootlooped in start animation, after wipe will boot correctly,
but after another reboot it will gonna boot again into ICS!
So if you will not gonna wipe just after flash, then just start all over again.[/SIZE]
Mahaco said:
Oh yeah ofcourse sorry xD
Ok, maby this works but you need the Honeycomb Update zip on your Tablet:
Code:
1. Boot into RECOVERY;
2. Flash [I][U]3.2.1r2[/U][/I] update zip;
3. During flash tablet will reboot 3 or 4 times, with 'green dots' screen.
Just before last 3rd dot reboot you've got to hold [B]VOL+[/B] button,
to get to RECOVERY just after flashing complete![B] IMPORTANT[/B]!;
4. Wipe device;
5. DONE.
[SIZE="1"]Wipe just after flash is very important, because if you will not gonna do this,
then it will be bootlooped in start animation, after wipe will boot correctly,
but after another reboot it will gonna boot again into ICS!
So if you will not gonna wipe just after flash, then just start all over again.[/SIZE]
Click to expand...
Click to collapse
I tried it but it says sku error how to find my honeycomb file pls Sku base nbx03 001
Country us
Sku detaile 27550100 017
drsarangaa said:
I tried it but it says sku error how to find my honeycomb file pls Sku base nbx03 001
Country us
Sku detaile 27550100 017
Click to expand...
Click to collapse
Hmmm it has been removed from Sony servers, wtf lol.
Anyway found this.
dl.dropbox.com/u/16440367/sony_s/signed-nbx03_001-ota-0042.001.zip
Good luck
Chur
Hmm thats quite logical,
First i wanted to put in a download link But i tried that link ( Honeycomb 3.2.1r2 ) and that link is down
---------- Post added at 12:45 PM ---------- Previous post was at 12:41 PM ----------
stifilz said:
Stuck on Honeycomb 3.2.1r2
Click to expand...
Click to collapse
Omg, another one i feel really sorry for your problem, i tried to beat the Kernel 9 and above, but it failed and i stopped i can't figure it out, don't even mentioned ICS, but for you it means no rooted ICS aswel, thats hars, good luck with that and i hope for you some other dev will make this thing happen!,
Its a shame that there arren't many "Smart" people with a Sony tablet,
For downgrade i have to reinstall hack recovery or not.
drsarangaa said:
For downgrade i have to reinstall hack recovery or not.
Click to expand...
Click to collapse
Dont think so as you are installing a stock room, then rooting and then prerooting ics.
Chur
drsarangaa said:
For downgrade i have to reinstall hack recovery or not.
Click to expand...
Click to collapse
Maby you have to make an nandroid back up. thats all, then just follow these steps.
i have a little problem:
i just installed cyanogen 10, and all went great, except it won't do anything
it's just the blue icon on the start, and it's like that for hours, until the battery over
is there something i can do, or is complety bricked?
Doesn't sound like everything went all that great then!
What recovery did you use to flash the ROM? Did you wipe the device as per instructions first? Can you reboot into recovery mode? What ROM were you on before?
Just as a tip, you'll have to provide more detail and show you are trying to resolve the problem or you will find yourself on your own more often than not...
djmatt604 said:
Doesn't sound like everything went all that great then!
What recovery did you use to flash the ROM? Did you wipe the device as per instructions first? Can you reboot into recovery mode? What ROM were you on before?
Just as a tip, you'll have to provide more detail and show you are trying to resolve the problem or you will find yourself on your own more often than not...
Click to expand...
Click to collapse
well, i'm kinda new to this, so i used this post on xda:
http://forum.xda-developers.com/showthread.php?t=1803593 (my samsung tablet is 10.1, not 10.1v, i don't know if it makes the diference)
there was step 7 that says:
7. Once in recovery: clean cache & clean dalvik cache. (I did a full wipe to be sure I don't report bugs to pershoot which are linked to data problems).
and i remember clean cache, but the dalvik cache i couldn't find it
the rom i had was the same from the store, androind 3.2 i guess
and yes, i can go to the recovery mode, what can i do?
The first thing you shouod always to before flashing roms is make a backup in CWM recovery. If you have a backup then go to restore in recovery and restore it ans start over. Dalvnik cache is in the advanced section of CWM recovery. So is format system if you need to that per the instruction provided by the rom's OP.
FillTheVoid said:
The first thing you shouod always to before flashing roms is make a backup in CWM recovery. If you have a backup then go to restore in recovery and restore it ans start over. Dalvnik cache is in the advanced section of CWM recovery. So is format system if you need to that per the instruction provided by the rom's OP.
Click to expand...
Click to collapse
i didn't made a backup, so there is any file that can bring the old system back (android 3.2) ?
or is it possible to do directly on the CWM menu? (if there is, how do i do it? )
and thanks in advance for your help
Your going to have to use ODIN to get back to stock 3.2. Use the Unrooting process outlined I this thread http://forum.xda-developers.com/showthread.php?t=1474971. THIS WILL WIPE YOUR SD CARD PARTITION. From there, reflash clockworkmod recovery with ODIN, but use the one provided by pershoot on his blog if you plan to flash one of his experimental CM builds. Goodluck! Follow all steps carefully, perform all necissary wipes. Oh and the first thing to do after you flash clockworkmod is perform a backup!
---------- Post added at 01:50 PM ---------- Previous post was at 01:38 PM ----------
I think the links in the thread I gave you might be dead. If so you need the US 3.2 tar file. You can get it at sammobile.com.
FillTheVoid said:
Your going to have to use ODIN to get back to stock 3.2. Use the Unrooting process outlined I this thread http://forum.xda-developers.com/showthread.php?t=1474971. THIS WILL WIPE YOUR SD CARD PARTITION. From there, reflash clockworkmod recovery with ODIN, but use the one provided by pershoot on his blog if you plan to flash one of his experimental CM builds. Goodluck! Follow all steps carefully, perform all necissary wipes. Oh and the first thing to do after you flash clockworkmod is perform a backup!
---------- Post added at 01:50 PM ---------- Previous post was at 01:38 PM ----------
I think the links in the thread I gave you might be dead. If so you need the US 3.2 tar file. You can get it at sammobile.com.
Click to expand...
Click to collapse
IT WORKED
it's back to normal, but there is only one problem now: playstore is not so playable now, it won't open :\
Settings>applications>play store>clear data then re sign in.
FillTheVoid said:
Settings>applications>play store>clear data then re sign in.
Click to expand...
Click to collapse
nop, i tried, and yes, it starts the google play store like it was the first time, but then it crasches :\
there is a way to install it like the other programs? ( something.apk)
Airoso92 said:
nop, i tried, and yes, it starts the google play store like it was the first time, but then it crasches :\
there is a way to install it like the other programs? ( something.apk)
Click to expand...
Click to collapse
Yes, but for that you will need root. Place the play store apk in system/app and give it permissions -r -r -w
That's all I can think of at the moment. Maybe some one else will have another suggestion :-/
FillTheVoid said:
Yes, but for that you will need root. Place the play store apk in system/app and give it permissions -r -r -w
That's all I can think of at the moment. Maybe some one else will have another suggestion :-/
Click to expand...
Click to collapse
i search on google and voila:
it worked
thank you very much, if you ever come to portugal, i owe you a gallons of beer or vokca, your choice:laugh:
Airoso92 said:
IT WORKED
it's back to normal, but there is only one problem now: playstore is not so playable now, it won't open :\
Click to expand...
Click to collapse
You could ve flashed the wrong firmware or the one for different country.
try checking the firmware version and country version.
Still not working ?
Get a working store apk from Google.
No?
Use some other market temporarily like appbrain.
Sent from my Galtab with jb
Hey all used this guide to upgrade stock jellybean,
http://forum.xda-developers.com/showthread.php?t=1909819
Worked brilliantly and then got above my skill level when removing some bloatware, normally i copy the apks i remove however this time i pressed delete by mistake, now have huge issues with play store and other apps. I have deleted too many apks
Have tried installing google apks again but still no joy. Does any one know of a way i can install JB again to start afresh i did try downgrading as per the guide but that didnt actually remove the JB firmware. I feel although even with huge amounts of help from flumpster (many thanks) we arnt cracking it so a fresh install is prob best, i just hope someone knows how to.
Thanks in advance.
wesley.neary said:
Hey all used this guide to upgrade stock jellybean,
http://forum.xda-developers.com/showthread.php?t=1909819
Worked brilliantly and then got above my skill level when removing some bloatware, normally i copy the apks i remove however this time i pressed delete by mistake, now have huge issues with play store and other apps. I have deleted too many apks
Have tried installing google apks again but still no joy. Does any one know of a way i can install JB again to start afresh i did try downgrading as per the guide but that didnt actually remove the JB firmware. I feel although even with huge amounts of help from flumpster (many thanks) we arnt cracking it so a fresh install is prob best, i just hope someone knows how to.
Thanks in advance.
Click to expand...
Click to collapse
I would assume you can do a factory reset. With the until off, press and hold vol dwn, then press and hold the pwr button for a few seconds, release the pwr button but continue to hold vol dwn, then release when the bootloader is displayed, from there you should have an option to Wipe Data (Factory Reset).
imadork8317 said:
I would assume you can do a factory reset. With the until off, press and hold vol dwn, then press and hold the pwr button for a few seconds, release the pwr button but continue to hold vol dwn, then release when the bootloader is displayed, from there you should have an option to Wipe Data (Factory Reset).
Click to expand...
Click to collapse
I did try try that however it didnt replace the missing apps.
wesley.neary said:
I did try try that however it didnt replace the missing apps.
Click to expand...
Click to collapse
enter the bootloader, select Fastboot (USB icon)
Go to this forum and download the jb-twrp-recovery
http://forum.xda-developers.com/showthread.php?t=1911024
>> Download tf201-jb-twrp-recovery.blob and flash it via fastboot (fastboot -i 0x0b05 flash recovery tf201-jb-twrp-recovery.blob) and reboot.
Click to expand...
Click to collapse
Go back and follow the steps again
INSTRUCTIONS:
1. Download the ROM update zip (us-tf201-jro03c-10.4.2.15-stock-deodexed.zip)
2. Download the Superuser update zip (Superuser-3.2-arm-signed.zip)
3. Copy the files to your device and reboot into recovery
4. Wipe data/factory reset [VERY IMPORTANT STEP!! Just use the recovery wipe/factory reset, do not use any full wipe update zips or scripts]
5. Flash the ROM update zip and immediately after that, flash the Superuser update zip.
6. Reboot your device and wait for the new bootloader, kernel & recovery to flash (the blue progress bar) and then let the device boot up.
7. Enjoy JB on your device!!
Click to expand...
Click to collapse
imadork8317 said:
enter the bootloader, select Fastboot (USB icon)
Go to this forum and download the jb-twrp-recovery
http://forum.xda-developers.com/showthread.php?t=1911024
Go back and follow the steps again
Click to expand...
Click to collapse
The poster is not unlocked and cannot do this.
wesley, you know I told you to force close them apps and wipe data and cache for them, did you restart before trying play again?
flumpster said:
The poster is not unlocked and cannot do this.
wesley, you know I told you to force close them apps and wipe data and cache for them, did you restart before trying play again?
Click to expand...
Click to collapse
Yes force stopped wiped data and rebooted but still as soon as device reboots i get the error google play store has stopped.
Thanks for all your help guys it is appreciated, and is probably all that has stopped me throwing the thing at the wall.
wesley.neary said:
Yes force stopped wiped data and rebooted but still as soon as device reboots i get the error google play store has stopped.
Thanks for all your help guys it is appreciated, and is probably all that has stopped me throwing the thing at the wall.
Click to expand...
Click to collapse
because you are not unlocked we are purely guessing on fixes for this at the moment but I know you now have google services framework back. When you was asked above to do the volume down and power and then select wipe was this done after we got google services back or before?
flumpster said:
because you are not unlocked we are purely guessing on fixes for this at the moment but I know you now have google services framework back. When you was asked above to do the volume down and power and then select wipe was this done after we got google services back or before?
Click to expand...
Click to collapse
The plot thickens as now i tried the wipe as described and its force closing on the new setup wizard im guessing im running out of options as i now cant get past the setup wizard.
wesley.neary said:
The plot thickens as now i tried the wipe as described and its force closing on the new setup wizard im guessing im running out of options as i now cant get past the setup wizard.
Click to expand...
Click to collapse
Well there are still options. If you had USB debugging enabled in developer options you can still adb stuff to the device. If you don't as a last resort you could unlock the bootloader and install it as a custom rom. Also as you are not unlocked at all asus would probably accept it as an rma under warranty.
flumpster said:
Well there are still options. If you had USB debugging enabled in developer options you can still adb stuff to the device. If you don't as a last resort you could unlock the bootloader and install it as a custom rom. Also as you are not unlocked at all asus would probably accept it as an rma under warranty.
Click to expand...
Click to collapse
Ok how can i tell if i still have adb and if so whats the best file to try and push.
wesley.neary said:
Ok how can i tell if i still have adb and if so whats the best file to try and push.
Click to expand...
Click to collapse
You need to have the adb files on your computer. Open a command prompt where adb files are by holding down shift and right clicking on the folder adb is in and selecting open command prompt here. Then type adb devices into command window.
if you get waiting check in your device manager to see if you have any devices with explanation marks on it. If there are then install naked drivers from the top of developer section.
I have no idea what happened to my GNote, but the problem is when I reboot to ROM and unlock the screen the screen turns black, keys lit and that's it 'till I reboot and it happens all over again.
I'm looking for a fix or guide to completly wipe the phone and start over. Luckily I have my current ROM backed up.
Thanks in advance.
Are you flashing a kernel?
Once I flashed my favorite kernel with a new rom. It booted, but then I had infinite blackness. To fix it I booted into recovery, performed a factory reset, installed only a rom and was fine.
440bro said:
Are you flashing a kernel?
Once I flashed my favorite kernel with a new rom. It booted, but then I had infinite blackness. To fix it I booted into recovery, performed a factory reset, installed only a rom and was fine.
Click to expand...
Click to collapse
Nope, just a custom ROM, flashed 8 before this one and never had any issues. When my phone was working, I noticed something odd in root browser; some folders and files have their date set to 12/31/1969?????
I can still access TWRP and download mode.
youngunix said:
I have no idea what happened to my GNote, but the problem is when I reboot to ROM and unlock the screen the screen turns black, keys lit and that's it 'till I reboot and it happens all over again.
I'm looking for a fix or guide to completly wipe the phone and start over. Luckily I have my current ROM backed up.
Thanks in advance.
Click to expand...
Click to collapse
Put the phone in download mode, open Kies, plug phone into usb, in Kies select tools, firmware upgrade and initialization. Have your phones serial number handy (Can be found under the battery). Enter model number using all caps (SGH-I717) and follow the prompts. This will put the phone back to stock 4.1.2. You will loose root and recovery, but will be back to complete stock. By far the easiest, safest method to completely wipe and start over.
youngunix said:
Nope, just a custom ROM, flashed 8 before this one and never had any issues. When my phone was working, I noticed something odd in root browser; some folders and files have their date set to 12/31/1969?????
I can still access TWRP and download mode.
Click to expand...
Click to collapse
What rom are you flashing, and where did you get it from? If it's from a reliable source, and you're certain it's for your device, you might have a corrupt file. You can try re-downloading it and flashing again. If it happens again notify the developer and try a different rom.
rsfinsrq said:
Put the phone in download mode, open Kies, plug phone into usb, in Kies select tools, firmware upgrade and initialization. Have your phones serial number handy (Can be found under the battery). Enter model number using all caps (SGH-I717) and follow the prompts. This will put the phone back to stock 4.1.2. You will loose root and recovery, but will be back to complete stock. By far the easiest, safest method to completely wipe and start over.
Click to expand...
Click to collapse
WOW! Small little detail, huge difference. No wonder it wouldn't work, I typed all in caps except the {i}.
Thank you
440bro said:
What rom are you flashing, and where did you get it from? If it's from a reliable source, and you're certain it's for your device, you might have a corrupt file. You can try re-downloading it and flashing again. If it happens again notify the developer and try a different rom.
Click to expand...
Click to collapse
It wasn't the ROM, I've probably deleted one of them folders/files and f'ed up the system.
youngunix said:
It wasn't the ROM, I've probably deleted one of them folders/files and f'ed up the system.
Click to expand...
Click to collapse
I hate when that happens!
If you want to just fix what you've got you can reflash the SAME rom right on top of what you've got.
If you want a fresh start, in recovery perform a factory reset, install the rom of your choice, and enjoy!
After spending all night working on restoring the phone, at least the main issue is solved, I'm back on a custom ROM.
But I still see the same folders and files with date last modified: 12/31/1969. Can't believe I'm the only one with this issue.
KIES for me does not have the selection firmware upgrade and initialization under tools...I have Emergency Firmware Recovery and Firmware Upgrade Settings, which locks the program up (I'm on a Mac)...what happened is that I tried to do a upgrade that T-Mo was passing on, and can't boot past the screen that has the gray battery, or if I'm lucky, the Samsung Galaxy Note 4G Android 4G screen prior to the T-Mo jingle...phone has been wiped twice, at least...
And where do you see these files? Most likely they were on the usb storage and it didn't get wiped during ROM install.
What if I put all of the ROMs, etc., on the SD card, and attempt to restore that way?
---------- Post added at 04:37 PM ---------- Previous post was at 04:33 PM ----------
Agoattamer said:
And where do you see these files? Most likely they were on the usb storage and it didn't get wiped during ROM install.
Click to expand...
Click to collapse
What files are you speaking of?
lildaddym said:
What if I put all of the ROMs, etc., on the SD card, and attempt to restore that way?
---------- Post added at 04:37 PM ---------- Previous post was at 04:33 PM ----------
What files are you speaking of?
Click to expand...
Click to collapse
My response was meant for the OP.
I think I screwed myself over big time! But maybe one of you out there might be nice enough as to help me. PLEASE! Let's begin. So, Yesterday I rooted my Fire HD 6 and everything turned out to be working just fine. I installed a custom boot animation, did a few system modifications and everything was working fine. But then, the next day (today) I tried to install Xposed and rebooted and got a bootloop. :crying: So then I tried hard reseting it and now I'm back to the fire boot animation but still and solid bootloop. Any help will be accepted. PLEASE HELP ME! AND IF YOU DO COMMENT ON THIS, THANKS FOR TAKING TIME TO HELP. Help Please. Thanks!
Drew123abc123 said:
I think I screwed myself over big time! But maybe one of you out there might be nice enough as to help me. PLEASE! Let's begin. So, Yesterday I rooted my Fire HD 6 and everything turned out to be working just fine. I installed a custom boot animation, did a few system modifications and everything was working fine. But then, the next day (today) I tried to install Xposed and rebooted and got a bootloop. :crying: So then I tried hard reseting it and now I'm back to the fire boot animation but still and solid bootloop. Any help will be accepted. PLEASE HELP ME! AND IF YOU DO COMMENT ON THIS, THANKS FOR TAKING TIME TO HELP. Help Please. Thanks!
Click to expand...
Click to collapse
did you try factory reset?
t-ara said:
did you try factory reset?
Click to expand...
Click to collapse
Yes it didn't work.
Drew123abc123 said:
Yes it didn't work.
Click to expand...
Click to collapse
hold vol +, -, and power 30s, bootloader appear and choose factory reset
my kindle after factory reset home launcher and navigation bar disapper :crying:
t-ara said:
hold vol +, -, and power 30s, bootloader appear and choose factory reset
my kindle after factory reset home launcher and navigation bar disapper :crying:
Click to expand...
Click to collapse
I'll try that again
t-ara said:
hold vol +, -, and power 30s, bootloader appear and choose factory reset
my kindle after factory reset home launcher and navigation bar disapper :crying:
Click to expand...
Click to collapse
Just did that. No Go Still stuck at fire booting screen. :crying:
Might be broken
I don't think you'll have anyway to fix it. Xposed modifies system files, but I believe factory reset only wipes the data partition. Unless there is a way to resinstall the OS, there might not be any way to get out of the bootloop.
ryanyz10 said:
I don't think you'll have anyway to fix it. Xposed modifies system files, but I believe factory reset only wipes the data partition. Unless there is a way to resinstall the OS, there might not be any way to get out of the bootloop.
Click to expand...
Click to collapse
Ok. Well thanks for letting me know. I'm going to keep looking but if you find something let me know. Thanks!
i think my kindle is brick :crying:
goodbye kindle fire 6 club, i don't think we can reflash rom because amazon don't allow unlock bootloader we can't flash custom recovery
i will never buy any amazon devices
Does this maybe help? When I connect my Fire (Amazon Fire HD 6) to my computer, and run: adb devices, I get:
List of devices attached
???????????? no permissions
I'm not sure if this is helpful or not but just decided to throw it out there.
t-ara said:
i think my kindle is brick :crying:
goodbye kindle fire 6 club, i don't think we can reflash rom because amazon don't allow unlock bootloader we can't flash custom recovery
i will never buy any amazon devices
Click to expand...
Click to collapse
Actually I think you can reflash because when you connect the Fire to a Windows Computer and then turn it off it comes up with some sort of driver but doesn't look like anyone has the specific driver installed yet.
Of course there are drivers, but you don't have the software. For example, HTC phones have RUU's which will completely wipe and reinstall a clean system. Same thing with LG kdz's. There's nothing like that for a Fire because Amazon doesn't release them. (or they don't get leaked)
---------- Post added at 06:18 PM ---------- Previous post was at 06:14 PM ----------
You only need an unlocked bootloader to flash custom roms. In fact, I think a locked bootloader is required to reflash stock system.
ryanyz10 said:
Of course there are drivers, but you don't have the software. For example, HTC phones have RUU's which will completely wipe and reinstall a clean system. Same thing with LG kdz's. There's nothing like that for a Fire because Amazon doesn't release them. (or they don't get leaked)
---------- Post added at 06:18 PM ---------- Previous post was at 06:14 PM ----------
You only need an unlocked bootloader to flash custom roms. In fact, I think a locked bootloader is required to reflash stock system.
Click to expand...
Click to collapse
If I can some how get to fastboot I should be fine but since I factory reset the Fire, I don't have permissions to use adb.
A factory reset should always be last resort because of exactly this.
Sent from my DROID RAZR M using XDA Free mobile app
Exactly.
Also, if we had access to fastboot, alot of things would be easier. We could've already flashed a custom recovery and you wouldn't be in this mess. I feel that your best bet is to return it on warranty (if there is warranty) and tell them an update got messed up.
I don't know how, but I managed to recover from a bootloop. I factory reset via the recovery menu twice, and finally got back in
Has anyone tried entering fast boot the same way the kfhd 8.9 is entered? Powered down with a PC sending the command thru USB?
I'm sorry I don't own this device o just follow it.
Sent from my DROID RAZR M using XDA Free mobile app
mrkhigh said:
Has anyone tried entering fast boot the same way the kfhd 8.9 is entered? Powered down with a PC sending the command thru USB?
I'm sorry I don't own this device o just follow it.
Sent from my DROID RAZR M using XDA Free mobile app
Click to expand...
Click to collapse
No, but I'll give it a whirly-whirl
I do not know if this would work or even the steps, but you can download the stock firmware from here: www.amazon.com/gp/help/customer/display.html/ref=hp_left_v4_sib?ie=UTF8&nodeId=201596860
Also the ????????????? Besides your device from "adb devices" just means you need to install the driver for it. That should not be too hard to find out how to do. But really I think you'd need the fastboot drivers more. But in the past I have fixed a bootloop by just looking at the logs to figure out where the crash is coming from via adb logcat, then fixing that issue. But since this is using xposed it'd probably be too complicated to fix manually. Don't ask me for drivers tho cause I use Linux.
Note: the firmware update downloads as a bin file but it is just a zip file. A fastboot update might actually work with it since it is signed by Amazon.
Something like:
Wipe your device. (only if necessary)
fastboot -w
Update your ROM.
fastboot update
---------- Post added at 11:03 PM ---------- Previous post was at 10:45 PM ----------
ryanyz10 said:
Exactly.
Also, if we had access to fastboot, alot of things would be easier. We could've already flashed a custom recovery and you wouldn't be in this mess. I feel that your best bet is to return it on warranty (if there is warranty) and tell them an update got messed up.
Click to expand...
Click to collapse
I've gotten into fastboot on this device. I think it was either "adb reboot bootloader" or "adb reboot fastboot" that works. Keep in mind when in fastboot mode the fire hd6 screen is completely blank.
powerpoint45 said:
I do not know if this would work or even the steps, but you can download the stock firmware from here: www.amazon.com/gp/help/customer/display.html/ref=hp_left_v4_sib?ie=UTF8&nodeId=201596860
Also the ????????????? Besides your device from "adb devices" just means you need to install the driver for it. That should not be too hard to find out how to do. But really I think you'd need the fastboot drivers more. But in the past I have fixed a bootloop by just looking at the logs to figure out where the crash is coming from via adb logcat, then fixing that issue. But since this is using xposed it'd probably be too complicated to fix manually. Don't ask me for drivers tho cause I use Linux.
Note: the firmware update downloads as a bin file but it is just a zip file. A fastboot update might actually work with it since it is signed by Amazon.
Something like:
Wipe your device. (only if necessary)
fastboot -w
Update your ROM.
fastboot update
---------- Post added at 11:03 PM ---------- Previous post was at 10:45 PM ----------
I've gotten into fastboot on this device. I think it was either "adb reboot bootloader" or "adb reboot fastboot" that works. Keep in mind when in fastboot mode the fire hd6 screen is completely blank.
Click to expand...
Click to collapse
I use Linux as well (Fedora 21) and I still get the all the question marks. But if you guys keep talking about fastboot, do you think it would be possible to get in to fastboot if I bought a fastboot cable or made one?