Hi friends,
I need help.
I bought a teclast A10t few days ago.
Today i tried to upgrade it to ICS 4.0.3.
I didn't understand something while doing the process
and now - it won't turn on.
No matter what combination I do (connect USB, Press VOL- and press power 4-5 times) - the screen remains black. No feedback. Just black.
I have the hunch that I turned it OFF during uploading, although I turn it off 1 minute after the process begun.
Please help.
I don't know what to do in order to get some response from this tablet.
Thanks
Related
I have problems with my Allwiner A13B tablet. It wont start at all. I had a bootloop problem, so i flashed the tablet wiht LiveSuit. After the flash everything was ok, only the touch was working opposit but i've found a fix for that. I was cheking the options to see if all of the others features are fine, but i didnt had much of a battery and the battery died and tablet turned off. I've tried to turned on ever since but with no luck. The combination of the buttons (VOL + & PWR) won't work. I've tried to hold for 30 sec the PWR buton and plugged in then press the power button for 3 sec to try to start the tablet but nothing happends, not even with the reset button in the little hole. The blue LED light was working when i plugged but 4 hours later it stopped. I just leaved my tablet not plugged in for 2 hours then i plugged in and the light start to work again but 2 hours later it stopped. When i plug in the device in my pc and try to launch LiveSuit the update process starts but after few second fails and the PC says that the device i've connected has a malfunction. Please help me if you can.
come on guys help me please
Hi every XDA's mem.
I'm using SKY A900K and I flashed it to stock BINX yesterday. But my computer has shutdown so my phone is bricked!
Now my phone is short vibrate when i press power button and the screen is black. When my phone connects to my computer, nothing is happen.
What can i do in this case, please help me. Thank everyone
Hi there,
I bought this MiPad about 4 months ago and it was all working properly till yesterday. And all of a sudden, I saw the fast boot screen showing up on the screen. I was clueless as why that screen was showing up without me doing anything. I didn't know what to do and pressed power button (maybe that was the mistake I did). Now the device is turned off and not turning on at all. I tried many ways to turn it on, but failed till now. I have tried -
- Holding the Power button for quite a while.
- Holding a combination of Volume buttons and Power button.
- Charging it overnight and trying the above two steps. (though connected to the charger, no notification lights showed up)
- When searching for solutions, came across this thread in some forum. Tried this as well, but no results. (http://forum.xda-developers.com/ ... ve-totally-t3417604)
When I connect and disconnect the device to my laptop through USB cable, I can hear the Windows beep sound, but does not detect it (I mean, it won't be displayed in either MiFlash, MiPCSuite tools or in the Windows file explorer).
If anybody has a solution for this, please help. Thanks.
I checked all the other threads on this and they don't seem to apply. I have an xperia s tablet that I really like. It was becoming slow so I finally decided it was time to root. Thanks Condi for the motochopper. I got it rooted successfully but then it was running too slow to be useable. I found a program to run that was supposed to rearrange the memory the way you defrag a computer drive. After running that the tablet would only turn on to the Sony logo. I did a factory reset a couple of times and now I can not turn on at all. I get the green charge light and I can get the red single blink when I do a reset but then when I press the power button I get the white light comes on and goes right back off. I tried with the up vol, down vol and no other keys but nothing. I have tried plugging into the computer and sometimes it sees a malfunctioning USB device and sometimes it sees nothing. I have run the xperia unbricker I found on here and it says waiting for device. I tried plugging it in with that program running but no luck. The only other post I found that was related the user said it was a motherboard failure. I'm not ready for that yet. Any ideas out there? Thanks in advance.
Okay so I've rooted my Exynos S9+ with Odin and SuperSU since it gives me an error when I try to install magisk.
And after that my phone is annoyingly turning off and it also even stops charging when this happens. This happens a few seconds after i press the power button to lock the screen as everybody usually does, the phone doesnt respond to any buttons or charging and I have to FORCE restart it by holding Power + volume down for +-7 seconds.
Any help please? The phone is brand new, got it a week ago (the time I have to wait in order to be able to enable OEM Unlock feature).
Should I try disabling OEM Unlock, will it fix it or try another rooting method? I need really urgent help please.
Thank you in advance.
I will donate 10$ to someone who really helps me.