Ive tried flashing a new firmare to my fone now its stuck on the sony erricson screen, flashtool and all the other programs dont seem to work on my fone, ive pressed volume up, down, back button but nothing seems to work, anyone got any suggestions?
ironzy said:
Ive tried flashing a new firmare to my fone now its stuck on the sony erricson screen, flashtool and all the other programs dont seem to work on my fone, ive pressed volume up, down, back button but nothing seems to work, anyone got any suggestions?
Click to expand...
Click to collapse
Check the Downgrade to GB section here:
http://talk.sonymobile.com/thread/35239?tstart=0
Steps are easy to follow and hopefully will solve your issue. And for ftf files for firmwares other than those listed there, search here on XDA.
Thanks,
Rick
Hit Thanks if I helped in anyway
DragonClawsAreSharp said:
Check the Downgrade to GB section here:
Steps are easy to follow and hopefully will solve your issue. And for ftf files for firmwares other than those listed there, search here on XDA.
Thanks,
Rick
Hit Thanks if I helped in anyway
Click to expand...
Click to collapse
thats the thing, ive tried to flash a new firmware using flash tool but it doesnt do anything, I press volume down and plug in the usb cable the screen stays blank and the led goes green but nothing else happens.
Do you have your bootloader unlocked?
And how did you try to flash the new firmware after which the mishap happened?
In case your bootloader is not unlocked, use PC Companion to repair your cell phone.
Thank You,
Rick.
...........
Hit Thanks if I helped in anyway
Sent from my SK17i using XDA
DragonClawsAreSharp said:
Do you have your bootloader unlocked?
And how did you try to flash the new firmware after which the mishap happened?
In case your bootloader is not unlocked, use PC Companion to repair your cell phone.
Thank You,
Rick.
...........
Hit Thanks if I helped in anyway
Sent from my SK17i using XDA
Click to expand...
Click to collapse
the bootloader is locked, is that why the flash tool programs arent working?
I tried to update the firmware with pc companion thats what seemed to break the fone, now when i click repair fone it says the update of software failed.
ironzy said:
the bootloader is locked, is that why the flash tool programs arent working?
I tried to update the firmware with pc companion thats what seemed to break the fone, now when i click repair fone it says the update of software failed.
Click to expand...
Click to collapse
Flash tool will work with original firmwares released by Sony, even if your bootloader is locked.
Okay. So now you try to download the S(M)US, and try repairing the phone by it. And report back.
Good Day,
Rick.
...........
Hit Thanks if I helped in anyway
Sent from my SK17i using XDA
---------- Post added at 07:50 PM ---------- Previous post was at 07:40 PM ----------
And if it still doesnlt help, go to
http://forum.xda-developers.com/showthread.php?t=1568792
and try doing whats written in the 6th point. Do it properly, following the instructions as it is. And you did not say which phone you have?
Thank you,
Rick.
......
Hit Thanks if I helped in anyway
ironzy said:
thats the thing, ive tried to flash a new firmware using flash tool but it doesnt do anything, I press volume down and plug in the usb cable the screen stays blank and the led goes green but nothing else happens.
Click to expand...
Click to collapse
That is completely normal, it means your phone is in flashmode.
If Flashtool asks you to connect, then do it this way, so that green LED would light up. Flashtool starts the installation and does the work.
If it fails, post the error log here and we will see further.
my fone is the live with walkman wt19i.
ive tried update service, flashtool and still cant get it to work, its like its not recognising my fone, i have all the drivers installed so there shouldnt be a problem there, here is the log from flash tool, doesnt really say much though.
29/039/2012 22:39:15 - INFO - <- This level is successfully initialized
29/039/2012 22:39:15 - INFO - Flashtool Version 0.8.0.0 built on 2012-05-27 21:57:12
29/039/2012 22:39:15 - INFO - You can drag and drop ftf files here to start flashing them
29/039/2012 22:39:20 - INFO - Device disconnected
29/039/2012 22:39:32 - INFO - Selected Xperia_2011_FreeXperia_ALL.ftf
29/039/2012 22:39:32 - INFO - Preparing files for flashing
29/039/2012 22:39:32 - INFO - Please connect your device into flashmode.
29/040/2012 22:40:03 - INFO - Log written to C:\Flashtool\flashtool_2012-05-29_10-39-15.log
29/040/2012 22:40:12 - INFO - Flash canceled
Related
Hello XDA members
2 weeks ago i bought a brand new Neo V and fully updated it from SEUS
1 week ago i started reading your forums [facepalm]
Yesterday i followed a series of tutorials on the Neo V Development forum and i managed to brick my phone [facewall!!!]
What i did :
1) Download lots of stuff!!!
a) .42 ftf file from here : http://forum.xda-developers.com/showpost.php?p=19808360&postcount=3
b) flashtool from it's original website
c) DoomKernel's rooting script
d) CWM script from here : http://forum.xda-developers.com/showpost.php?p=19733978&postcount=1 (the 1st way)
e) S1tool from here : http://forum.xda-developers.com/showpost.php?p=18013064&postcount=44
2) Use them ALL!!!
a) Install and extract where necessary
b) put .42 in C:\flashtool\firmware
c) put everything else in C:\SETools\ to act tidy
3) Feel like McGuyver!
a) used needle & wire to unlock bootloader with s1tool [success]
4) Take the big step!
a) flash .42 firmware with flashtool [all OK]
phone took it's time to reboot, scared me to death! at least 4 full minutes :/
b) use flashtool to root from the Advanced>Root>ZergRush menu [Fail]
it seems flashtool failed after first part.
c) used DoomKernel's script and rooted phone [all OK]
d) reboot and enjoy! [all OK]
.42 firmware was ok, root ok, boot was slow.. other than that everything worked. (except market, could not download anything!)
e) used Upgrade Service from phone menu and found .62 OTA upgrade. [Failed]
phone downloaded the new firmware, i pressed install, that was it.
And thus my Neo V rebooted to complete the upgrade to .62
The upgrade was never completed, the phone never turned on again.
No SE logo, no led, no nothing!
Everytime i press the power button nothing happens, if i keep it pressed for some time the led flashes green every second.
Everytime i connect it to the PC usb it goes to flash mode on it's own, no back key pressed.
When plugged on charger led flashes green every second.
Last thing i tried was to reflash it (since it went on flashmode) with .42 again.
Nothing there
Still, i would like to see it alive once more since 200 euro for a green led is not really a bargain
Any help appreciated!!
Ok if the pc recognizes it you should be able to resurrect it with pccompanion, seus or wotan client
Sent from my MT11i using Tapatalk
Will try, though phone is not really recognised..
it functions only as when turned off and pressing back button while connecting to pc usb.
EDIT : Installed SEUS again and tried to do an upgrade (only option available through support zone)
Failed first couple of times, then it popped up a new window asking to repair since update is not working.
Asked me phone model and downloading ATM, will report soon
EDIT 2 : Nothing with Pc Companion or SEUS. It reflashed the phone with .62 firmware but the phone is in the same state.
About Wotan Client, i would love to try it but i have no idea how to install it or run it, it asks for credits and i don't think reflashing will help in this case.
wotan flashing is free bro, just download their client and follow steps most probably u will get ur fone back to ur life. best of luck !
Just a thought, the phone acts as if the back button is constantly pressed and i find that VERY weird..
Also, SEUS discovers the phone as "Sony / Sony Ericsson" (?), is it possible that this has to do with the s1tool driver i installed before while unlocking the bootloader?
wow, thats what i call entire history of your phone
anw you experienced OTA brick. because you have unlocked bootloader.
strange, some people get brick some don't, with un-official(s1tool) method.
but with official, everyone get brick.
Madfysh said:
wow, thats what i call entire history of your phone
Click to expand...
Click to collapse
Thanx
I think asking people to help you requires you to help them too so yes, history is all i could do!
Madfysh said:
anw you experienced OTA brick. because you have unlocked bootloader.
Click to expand...
Click to collapse
OTA brick? The tutorials i followed requested me to upgrade with OTA to have .62 with root. Where they wrong?
Dodo_the_Bird said:
Thanx
I think asking people to help you requires you to help them too so yes, history is all i could do!
Click to expand...
Click to collapse
wow, if only more people would br like you
Dodo_the_Bird said:
OTA brick? The tutorials i followed requested me to upgrade with OTA to have .62 with root. Where they wrong?
Click to expand...
Click to collapse
they werent wrong, but if I think on which tutorial you mean, it says its for people with locked bootloader.
now when you have unlocked bl, your life is easier
you can simply use custom kernel which have root included in itself
go to dev section, you can use galaxian or bbooff kernel.
while you are there check sticky threads to see how to flash kernel.
after you read those, ask if you have any question.
---------- Post added at 12:55 AM ---------- Previous post was at 12:52 AM ----------
http://forum.xda-developers.com/showthread.php?t=1496102
http://forum.xda-developers.com/showthread.php?t=1520516
Thank you all SOOOOOO much!!!
Wotan worked, my phone is up and running on .42!!!
So now about tweaking a bit, those kernels support official roms only,
if i wanted to go for something more goodlooking, faster, nicer.. what would you suggest?
No, those kernels arent only for official rom's.
And about custom roms, I'm not the one to talk about it much, as I'm not so much into custom roms dont have enough time to test them.
so you will need to go trough development section and find something you like. remember you can also look in neo section, most of the roms can work on your phone with minor modifications.
also remember, first read then install
So.. i managed to have a working phone and now i am trying to flash galaxian.
i went on cmd, started fastboot with appropriate command and plugged in phone pressing the menu button.
Now in device manager i can see "S1boot Fastboot" and it is not recognised, what am i suppossed to do????
-turn off your phone.
-hold menu key(the right one )
-connect cable
-you should see blue light on led on the side, do you see it?
-go to folder where you have fastboot.exe file
-hold shift key and right-click of mouse anywhere in that folder except on files
-sellect start comandprompt here(or something like that)
- type fastboot devices
-tell if it says something.
Seems like you didn´t install drivers for fastboot...
i thought they are included in adb drivers !?
Well i have installed the whole android sdk with it´s drivers.
As long as it is unrecognized in Windows (no drivers installed) S1Tool has no Chance to detect it
Dodo_the_Bird said:
So.. i managed to have a working phone and now i am trying to flash galaxian.
i went on cmd, started fastboot with appropriate command and plugged in phone pressing the menu button.
Now in device manager i can see "S1boot Fastboot" and it is not recognised, what am i suppossed to do????
Click to expand...
Click to collapse
u havent installed the correct drivers, connect the phone again in fastboot mode, go to device manager, select s1tool fastboot, click update driver, browse for it manually and point it to the the folder in which you have fastboot, done.
Wow! Wotan client can unbrick a phone that bricked with OTA?
Sent from my MT11i using XDA
If you dont want to brick phone with new custom kernel, use ,,hotboot,, function.
That should boot phone with new kernel one time.
If you dont like kernel, just reboot your phone
Sorry for English.
talk about good memory i pity u LoL btw good luck on flashing ur phone and yeah i brick my neo a while back and have to search on google for 6 hrs then fix my neo for half a day thats 12hrs in real life now im happy that im d only in my family tree and clasm8 know how to flash a brick phone hell yeah im proud of it anyways gudluck
Sent from my MT15i using xda premium
soybi said:
Wow! Wotan client can unbrick a phone that bricked with OTA?
Sent from my MT11i using XDA
Click to expand...
Click to collapse
Yep
I hit the level 100 brick twice or thrice
Wotan server really helps
I bricked my phone yesterday after doing OTA( bootloader unlocked by testpoint method)...wotan server got it back alive and kicking
Hi chaps,
After trying a gingerbread rom and finding it too slow, I see most other roms require a custom kernel for best performance (and being able to use most other roms!)
Anyway, I'm running through the tutorials in the stickied Guide in this forum and during the unlocking the bootloader instructions it keeps telling me to switch my phone off.
Now it doesn't mention having the phone plugged into the PC at any point in that section but I assume you have to for the SE Tweaker tool to work .
My problem is that in the first couple of steps I'm told to turn my phone off yet as it's connected to the PC, it keeps switching back on to charge ie. it's not staying off.
So naturally me being afraid of bricking my phone and it being a first time for me, I haven't progressed past this part. Any help or guidance would be much appreciated.
Thanks
LostHH said:
Hi chaps,
After trying a gingerbread rom and finding it too slow, I see most other roms require a custom kernel for best performance (and being able to use most other roms!)
Anyway, I'm running through the tutorials in the stickied Guide in this forum and during the unlocking the bootloader instructions it keeps telling me to switch my phone off.
Now it doesn't mention having the phone plugged into the PC at any point in that section but I assume you have to for the SE Tweaker tool to work .
My problem is that in the first couple of steps I'm told to turn my phone off yet as it's connected to the PC, it keeps switching back on to charge ie. it's not staying off.
So naturally me being afraid of bricking my phone and it being a first time for me, I haven't progressed past this part. Any help or guidance would be much appreciated.
Thanks
Click to expand...
Click to collapse
Turn your phone off and leave it disconnected from your PC
When the unlock procedure asks you to plug in your phone, press the back-button while you connect the usb-cable to your phone.
This way you enter flash-mode, which is what the tools require.
SmG67 said:
Turn your phone off and leave it disconnected from your PC
When the unlock procedure asks you to plug in your phone, press the back-button while you connect the usb-cable to your phone.
This way you enter flash-mode, which is what the tools require.
Click to expand...
Click to collapse
I can't seem to enter flash mode :/
I hold the back button and connect the phone to the pc. Initially it installed some flash driver onto the pc and then booted up as normal.
Now it just boots up as normal no matter how long I hold the back button (throughout the whole process so far)
Does having xrecovery have anything to do with this?
Thanks
Edit - my antivirus was quarantining s1tool.exe! derp.
Edit 2 - Success! Thanks chaps. You're all pretty cool in my books
please i need help to enable network on my phone
i went through the process of intalling minicm7.2 on my xperia x10 mini pro.
After unlocking my bootloader and intalling the rom, i cannot gain access to my network provider.
Please i need help to get the network back on my xperia x10 mini pro.
I ve relock the bootloader and restored the stock rom 2.1.1.a.0.6 but i still dont get access to my network.
PLEASE I NEED HELP.....
kingice85 said:
i went through the process of intalling minicm7.2 on my xperia x10 mini pro.
After unlocking my bootloader and intalling the rom, i cannot gain access to my network provider.
Please i need help to get the network back on my xperia x10 mini pro.
I ve relock the bootloader and restored the stock rom 2.1.1.a.0.6 but i still dont get access to my network.
PLEASE I NEED HELP.....
Click to expand...
Click to collapse
Did you relock the bootloader before you restored stock rom?
please help
SmG67 said:
Did you relock the bootloader before you restored stock rom?
Click to expand...
Click to collapse
yes i relocked the bootloader before i restored to the SE original stock rom...
I still cant get access to the sim network but can see the sim tool kits..pls help me
solotion
kingice85 said:
i went through the process of intalling minicm7.2 on my xperia x10 mini pro.
After unlocking my bootloader and intalling the rom, i cannot gain access to my network provider.
Please i need help to get the network back on my xperia x10 mini pro.
I ve relock the bootloader and restored the stock rom 2.1.1.a.0.6 but i still dont get access to my network.
PLEASE I NEED HELP.....
Click to expand...
Click to collapse
I have had problem like yours on x10i .
but about solotion:
just flash e15i nAa kernel file to your phone by flash tool before this phone must be rooted.100% worked for me .sorry about my english.:laugh:
Help
Hi,
i don't know if this comes under this section also,
i lost the post that i was using to update my x10 mini pro from 2.1 to 2.3 after my pc freezed and restarted.
So my SE finished the update but it's stuck on the Sony Ericsson text on boot up in faint brightness.
I used flshtool 0.9.0.0
rooted the phone and installed busy box.
restarted the phone with the blue screen menu a selected the NAa kernel from SD to load.
After that rebooted the phone then sony ericsson text came very bright then it starts to faint to minimum and nothing else happens.
If i connect flashtool i will get the following:
02/046/2012 14:46:55 - INFO - Device disconnected
02/047/2012 14:47:16 - INFO - Device connected with USB debugging off
02/047/2012 14:47:16 - INFO - For 2011 devices line, be sure you are not in MTP mode
02/047/2012 14:47:24 - INFO - Device disconnected
02/047/2012 14:47:26 - INFO - Device connected with USB debugging on
02/047/2012 14:47:27 - INFO - Connected device : U20
02/047/2012 14:47:27 - INFO - Installed version of busybox : BusyBox v1.19.4-cm7 bionic (2012-02-04 22:27 +0100) multi-call binary.
02/047/2012 14:47:27 - INFO - Android version : 2.3.7 / kernel version : 2.6.29
i even tried SEUS but nothing happens it would ask to reboot in flashmode and the device will enter flashmode and nothing happens.
also tried to restart with the blue screen menu by pressing power and the back button multiple times and back with volume + and - nothing occurs.
I downloaded ver 0.9.1.0
and tried the force root and here is the log:
Any solution ?
Thanks in advance.
nabilaj said:
Hi,
i don't know if this comes under this section also,
...
Any solution ?
Thanks in advance.
Click to expand...
Click to collapse
You have to flash the kernel from flashtool:
Put the kernel zipfile in the /firmwares folder where you installed flashtool
Choose the flash-button
Choose the kernel
Connect your phone in flashmode and it will be done (if your bootloader is unlocked)
You can not install a kernel from the sd-card using the CWM (blue screen) menu
The reason your phone doesn't boot up is because your ROM and Stock kernel are not compatible
If you're succesful in flashing the kernel, you should be fine.
There is no need to root your phone before you flash the kernel, and the ROM is pre-rooted.
stuck on text sony erricson nothing else can be done
Thank you for your reply,
i'm not able to flash anything on the device.
getting Error Flashing. Aborted.
please see the logfile of flashtool 0.9.1.0
and i'm trying to load U20_nAa-14_2.6.29.6-nAa-14.ftf
if i'm doing wrong tell me !
Please have a look at the log file.
Why i'm getting permission denied
and FTError
Thank you in advance.
SmG67 said:
You have to flash the kernel from flashtool:
Put the kernel zipfile in the /firmwares folder where you installed flashtool
Choose the flash-button
Choose the kernel
Connect your phone in flashmode and it will be done (if your bootloader is unlocked)
You can not install a kernel from the sd-card using the CWM (blue screen) menu
The reason your phone doesn't boot up is because your ROM and Stock kernel are not compatible
If you're succesful in flashing the kernel, you should be fine.
There is no need to root your phone before you flash the kernel, and the ROM is pre-rooted.
Click to expand...
Click to collapse
nabilaj said:
Thank you for your reply,
i'm not able to flash anything on the device.
getting Error Flashing. Aborted.
please see the logfile of flashtool 0.9.1.0
and i'm trying to load U20_nAa-14_2.6.29.6-nAa-14.ftf
if i'm doing wrong tell me !
Please have a look at the log file.
Why i'm getting permission denied
and FTError
Thank you in advance.
Click to expand...
Click to collapse
In your original post you said you tried to install the kernel from sd-card using the CWM menu, which is impossible
I suppose you have to unlock the bootloader first, in flashtool it's under the plugins-section.
But you first have to make sure it is safe or you can brick your device doing that
Go find the post where you got the kernel from, it will have a link to the bootloader unlock tutorial.
Use that to get instructions on how to know if your device is safe to unlock.
Then use the bootloader-unlock in flashtool's plugin-menu to unlock the bootloader.
Then flash the kernel.
stuck on text sony erricson nothing else can be done
Yes i did the root and unlocked the bootloader.
and loaded the kernel from SD card using CWM menu.
It was asking to load the kernel from SD card,
i wish i could boot with CWM to give you the exact steps.
The device was i guess able to work but i read somewhere in forum to try rooting again using force psneuter
and that was when things changed on the device cause i used to see in Clean Root icon in flashtool lot of apps and commands in red now only ls: in red is there!!
Regards
SmG67 said:
In your original post you said you tried to install the kernel from sd-card using the CWM menu, which is impossible
I suppose you have to unlock the bootloader first, in flashtool it's under the plugins-section.
But you first have to make sure it is safe or you can brick your device doing that
Go find the post where you got the kernel from, it will have a link to the bootloader unlock tutorial.
Use that to get instructions on how to know if your device is safe to unlock.
Then use the bootloader-unlock in flashtool's plugin-menu to unlock the bootloader.
Then flash the kernel.
Click to expand...
Click to collapse
nabilaj said:
Yes i did the root and unlocked the bootloader.
and loaded the kernel from SD card using CWM menu.
It was asking to load the kernel from SD card,
i wish i could boot with CWM to give you the exact steps.
The device was i guess able to work but i read somewhere in forum to try rooting again using force psneuter
and that was when things changed on the device cause i used to see in Clean Root icon in flashtool lot of apps and commands in red now only ls: in red is there!!
Regards
Click to expand...
Click to collapse
You can NOT flash the kernel from the sd-card
Only from your PC, and your phone does not need to be rooted for that, you only need an unlocked bootloader.
stuck on text sony erricson nothing else can be done
Ok I understood that part.
My question is how to fix my device if possible, i made a mistake somewhere there and don't recall cause i gave up after i looded the rom i think from SD card.
it's over 2 weeks and now i have some free time to try to fix it with the hope of getting someone here on in the forum to help me out.
Thanks
SmG67 said:
You can NOT flash the kernel from the sd-card
Only from your PC, and your phone does not need to be rooted for that, you only need an unlocked bootloader.
Click to expand...
Click to collapse
nabilaj said:
Ok I understood that part.
My question is how to fix my device if possible, i made a mistake somewhere there and don't recall cause i gave up after i looded the rom i think from SD card.
it's over 2 weeks and now i have some free time to try to fix it with the hope of getting someone here on in the forum to help me out.
Thanks
Click to expand...
Click to collapse
Try to do a repair with SEUS or PC Companion
Then flash the kernel
Boot into the CWM menu (included in the custom kernel)
Then flash the ROM you want
stuck on text sony erricson nothing else can be done
I tried,
start SEUS
1-Support Zone
2-Start
3-Phone software update, Start
will get a message could not find phone (repair phone)
will press on repair phone.
4-Phone software update, continue
5-Personal data will be lost tick the box ( i understand that my personal ....) next
6-Please select your phone ( will select U20i) next
7-it will ask to put the phone in flashmode ( will put my phone in flash mode and wait ) NOTHING happens
My phone will boot normally after waiting but stuck on the Sony Ericsson text.
What next ?
once i plug it's pluged it will ask to mount USB card
SmG67 said:
Try to do a repair with SEUS or PC Companion
Then flash the kernel
Boot into the CWM menu (included in the custom kernel)
Then flash the ROM you want
Click to expand...
Click to collapse
nabilaj said:
I tried,
start SEUS
1-Support Zone
2-Start
3-Phone software update, Start
will get a message could not find phone (repair phone)
will press on repair phone.
4-Phone software update, continue
5-Personal data will be lost tick the box ( i understand that my personal ....) next
6-Please select your phone ( will select U20i) next
7-it will ask to put the phone in flashmode ( will put my phone in flash mode and wait ) NOTHING happens
My phone will boot normally after waiting but stuck on the Sony Ericsson text.
What next ?
once i plug it's pluged it will ask to mount USB card
Click to expand...
Click to collapse
hmm, weird, normally the only problem there is that SEUS says there's no firmware available Keep pressing the back-button till it actually starts flashing.
stuck on text sony erricson nothing else can be done
i tried can't feel anymore with my figure of over using it
SmG67 said:
hmm, weird, normally the only problem there is that SEUS says there's no firmware available Keep pressing the back-button till it actually starts flashing.
Click to expand...
Click to collapse
Hi, I have a orange network locked xperia ray st18i locked bootloader. I downloaded pc companion and did a software update and all went well. The phone booted up fine after the update until I shut it down and since then I have been unable to get passed the SE screen. It just hangs there. I am able to enter flash mode by pressing the down button and plugging the usb in. Tried phone repair option and still no jog.
Today I tried to unlock the bootloader using the pin touching menthod but that didnt work either. Said something like fatal error....
I need to unlock the bootloader to try a alternative rom to see if that works or revert back to the stock orange rom it came with but im cannot find this anywhere. I am a learner so any advice would be helpful. CAn anyone suggest a rom for the ray that can be installed using flash method WITHOUT unlocked bootloader? I am a **** for doing the uprgrade via sony website but I didnt think this would happen. should have left it as it was.
Thanks for reading.
Take your battery out and try reflashing again using SEUS.
Thread moved to Xperia Ray Q&A.
Yes I have tried that many times already and it finishes the update correctly but still hangs on the SE logo when turned on. I tried again just to see if anything has changed. When I connected the phone whilst pressing the down vol button it recognised it and said your phone already has the latest software but I re installed anyway. No change in result though.
Sony have asked to send the phone to repair and they will reply with a quote for fixing it. Has anyone used this service before and how much can i expect to pay for a software install? Repair office is in Ashford, kent.
thanks
Read my guide and try flashing a stock ftf file, if that fails theres a few other things you could try.
XperienceD said:
Read my guide and try flashing a stock ftf file, if that fails theres a few other things you could try.
Click to expand...
Click to collapse
Thanks for the reply. Do you know where I can download the stock orange tft file?
rollymac said:
Thanks for the reply. Do you know where I can download the stock orange tft file?
Click to expand...
Click to collapse
There is a method to build the stock ftf from the downloaded sony update service files, do this to build the ftf
Sent from my Nexus 7 running Android 4.2.1
mihahn said:
There is a method to build the stock ftf from the downloaded sony update service files, do this to build the ftf
Sent from my Nexus 7 running Android 4.2.1
Click to expand...
Click to collapse
All this techincal talk is affecting my sex life so Id rather stay a noob and focus on the boob!
SO CAN ANYONE TELL ME WHERE I CAN DOWNLOAD THE STOCK FTF FOR MY XPERIA RAY WHICH IS NETWORK LOCKED TO ORANGE AND HAS A LOCKED BOOTLOADER (CANNOT UNLOCK, TRIED TEST POINT METHOD).
I'll click the bloody thankyou button a million times if you can. thankyou!
rollymac said:
All this techincal talk is affecting my sex life so Id rather stay a noob and focus on the boob!
SO CAN ANYONE TELL ME WHERE I CAN DOWNLOAD THE STOCK FTF FOR MY XPERIA RAY WHICH IS NETWORK LOCKED TO ORANGE AND HAS A LOCKED BOOTLOADER (CANNOT UNLOCK, TRIED TEST POINT METHOD).
I'll click the bloody thankyou button a million times if you can. thankyou!
Click to expand...
Click to collapse
It's not as hard as you may think
Use this to create the ftf, it's step by step. If you can't/don't want to do it I can't help you because I have no orange firmware
Sent from my Nexus 7 running Android 4.2.1
mihahn said:
It's not as hard as you may think
Use this to create the ftf, it's step by step. If you can't/don't want to do it I can't help you because I have no orange firmware
Sent from my Nexus 7 running Android 4.2.1
Click to expand...
Click to collapse
thanks for the reply. When I did my upgrade it went through fine so I am assuming I alraedy have the new firmware on my phone. The problem is making it work. Why does my phone just stop and hang on the SE logo? are you telling me my original orange firmware is still in my mobile?
rollymac said:
so can anyone tell me where i can download the stock ftf for my xperia ray which is network locked to orange and has a locked bootloader (cannot unlock, tried test point method).
Click to expand...
Click to collapse
rollymac said:
Why does my phone just stop and hang on the SE logo?
Click to expand...
Click to collapse
HAD YOU READ THE FIRST PART OF MY GUIDE YOU WOULD ALREADY KNOW. Had you even read the stickys in the General section you would have found one.
Right so I created the .ftf file from the three update files. Ive downloaded x10 flash tool. I connect the phone and flashtools registers that a phone is connected then start the flash but soon after the phone just gets disconnected.
any idea's?
rollymac said:
Right so I created the .ftf file from the three update files. Ive downloaded x10 flash tool. I connect the phone and flashtools registers that a phone is connected then start the flash but soon after the phone just gets disconnected.
any idea's?
Click to expand...
Click to collapse
Download the latest flashtool (I guess it's 0.9.x) and install it. Go to the drivers folder and install all the drivers for all the phones and modes. Now you launch flashtool, but don't connect the phone! Click on the flash -> flashmode -> select the ftf and don't exclude anything (you have the ability on the right site).
Now click OK and the screen to connect the phone in flashmode appears. Shut down the phone, wait 20 seconds, hold volume down and while holding volume down connect the phone to PC.
Wait until the flashing process has finished and hope it'll start!
Sent from my Nexus 7 running Android 4.2.1
Thanks for guiding me and yes it finally flashed BUT the phone still hangs on the SE logo when booted up. I read somewhere on here another member had the same issue and it turned out to be the bandwidth???
What should I try now?
hello everyone,
i know that this have been probably covered, im searching for days, but i cant find any, it probably buried somewhere. i apologized to the admin, but i really want to solve this problem, i really really need my phone. tnx for your consideration
first thing first, i want you to know that I'm a noob in rooting and its my first post. my phone is sonyericsson xperia mini st15i with IMEI:0Mod Edit: please don't give out your IMEI number on a public forum) and im from philippines using Smart as my service provider, it is a prepaid account.
i followed this steps using instruction from this site "http://xperiahtcrootingrom.com/how-to-root-xperia-mini-st15i-sony/"
I think i brick my xperia mini, it keeps on restartting over and over again, heres the story,
*first i performed the downgrade to Xperia Mini (ST15i)_4.0.2.A.0.42_CE.ftf gingerbread using guide from "http://xperiahtcrootingrom.com/how-to-root-xperia-mini-st15i-sony/", and it worked and i was able to root it.
*second i performed step 3 of the said guide up to step where you execute “01-local-prop” , then i realized the the firmware i got “4.0.4 firmware” is not appearing in my choices, so i figure its not the right rom, i unplug the usb and restart the phone, then the problem starts, it keeps on restarting over and over, i tried to flash it again to Xperia Mini (ST15i)_4.0.2.A.0.42_CE.ftf but it doesnt work because it keeps on restarting, pls help, it my first time doing root, i know it’s a learning process, i hope you can help me. tnx very much. hope to hear from you soon.
i know that there are same problems with other devices, ive tried to search for it, it does have the same problems but its a different handset, i believed that there are different ways to root for every handset. tnx again, i hope to hear from you guys soon.
Were you able to flash again the Rom or not?
It should be a soft brick so if you'll install again the Rom you should be fine...
Sent from my LT22i using xda app-developers app
Ste91 said:
Were you able to flash again the Rom or not?
It should be a soft brick so if you'll install again the Rom you should be fine...
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
i wasnt able to flash it, because after the sony ericsson logo appears it restart again and again, could you tell me if there's other way todo it, maybe im doing something wrong.
norman.cricket23 said:
i wasnt able to flash it, because after the sony ericsson logo appears it restart again and again, could you tell me if there's other way todo it, maybe im doing something wrong.
Click to expand...
Click to collapse
thank you very much for the quick reply, hope you can help me.
norman.cricket23 said:
i wasnt able to flash it, because after the sony ericsson logo appears it restart again and again, could you tell me if there's other way todo it, maybe im doing something wrong.
Click to expand...
Click to collapse
Follow again the Step 1 of the guide you used (except the isntallation of the program which you already have made) and you should be good to go, with a GB rom, but good to go
Let me know if all goes trough!
Ste91 said:
Follow again the Step 1 of the guide you used (except the isntallation of the program which you already have made) and you should be good to go, with a GB rom, but good to go
Let me know if all goes trough!
Click to expand...
Click to collapse
Thank you very much, thats what im doing over and over again, it doesnt work because it always restart automaticaly after the sony logo appears, can you help me sir step by step, coz in a newbie in rooting. tnx. hope you can help me.
norman.cricket23 said:
Thank you very much, thats what im doing over and over again, it doesnt work because it always restart automaticaly after the sony logo appears, can you help me sir step by step, coz in a newbie in rooting. tnx. hope you can help me.
Click to expand...
Click to collapse
Make sure your phone has a good % of battery left
1) Power off the phone.
2) Start flashtool
3) Click on the Lighting Symbol and Select Flashmode and click OK.
4) Select Appropriate Firmware and Tick Wipe User Data and Wipe Cache check box if visible and click OK. If visible click even exclude TA
PS: The appropriate firmware is a stock firmware for your device. For example the GB rom you downloaded for the downgrade and already placed in the flashtool/firmwares folder
5) click ok and follow the on-screen indications
6) when it asks to plug your device in flashmode, plug the cable in the mobile keeping the Volume DOWN button pushed down.
7) follow the on-screen indications
Ste91 said:
Make sure your phone has a good % of battery left
1) Power off the phone.
2) Start flashtool
3) Click on the Lighting Symbol and Select Flashmode and click OK.
4) Select Appropriate Firmware and Tick Wipe User Data and Wipe Cache check box if visible and click OK. If visible click even exclude TA
PS: The appropriate firmware is a stock firmware for your device. For example the GB rom you downloaded for the downgrade and already placed in the flashtool/firmwares folder
5) click ok and follow the on-screen indications
6) when it asks to plug your device in flashmode, plug the cable in the mobile keeping the Volume DOWN button pushed down.
7) follow the on-screen indications
Click to expand...
Click to collapse
Wooohooo!!! tnx sir, you are heaven sent, my phone is working now, i wanna learn more so o could help someone, just like what you did to me, tnx a lot sir ste9. :cyclops:
No need for calling me sir, and you're welcome
Sent from my Xperia P using xda app-developers app
Ste91 said:
No need for calling me sir, and you're welcome
Sent from my Xperia P using xda app-developers app
Click to expand...
Click to collapse
thank you again, til nxt time.
ST15i restarted again and again
Ste91 said:
Make sure your phone has a good % of battery left
1) Power off the phone.
2) Start flashtool
3) Click on the Lighting Symbol and Select Flashmode and click OK.
4) Select Appropriate Firmware and Tick Wipe User Data and Wipe Cache check box if visible and click OK. If visible click even exclude TA
PS: The appropriate firmware is a stock firmware for your device. For example the GB rom you downloaded for the downgrade and already placed in the flashtool/firmwares folder
5) click ok and follow the on-screen indications
6) when it asks to plug your device in flashmode, plug the cable in the mobile keeping the Volume DOWN button pushed down.
7) follow the on-screen indications
Click to expand...
Click to collapse
hai.
im using st15i and its run icecream sandwich 4.0.4.
after i finished a call my phone keep on restarting again and again..
i have try these method using flashtools version 0.9.11.0
after plug in the cable n keeping the volume down button the flashtools says that
12/015/2013 18:15:08 - ERROR - Error flashing. Aborted
12/015/2013 18:15:08 - ERROR - Drivers need to be installed for connected device.
12/015/2013 18:15:08 - ERROR - You can find them in the drivers folder of Flashtool.
please help...
NazieRoslan said:
hai.
im using st15i and its run icecream sandwich 4.0.4.
after i finished a call my phone keep on restarting again and again..
i have try these method using flashtools version 0.9.11.0
after plug in the cable n keeping the volume down button the flashtools says that
12/015/2013 18:15:08 - ERROR - Error flashing. Aborted
12/015/2013 18:15:08 - ERROR - Drivers need to be installed for connected device.
12/015/2013 18:15:08 - ERROR - You can find them in the drivers folder of Flashtool.
please help...
Click to expand...
Click to collapse
Install all the drivers for all modes/devices from the flashtool installation folder - drivers. Then try it again
Sent from my Nexus 4 running Android 4.3
norman.cricket23 said:
hello everyone,
i know that this have been probably covered, im searching for days, but i cant find any, it probably buried somewhere. i apologized to the admin, but i really want to solve this problem, i really really need my phone. tnx for your consideration
first thing first, i want you to know that I'm a noob in rooting and its my first post. my phone is sonyericsson xperia mini st15i with IMEI:0Mod Edit: please don't give out your IMEI number on a public forum) and im from philippines using Smart as my service provider, it is a prepaid account.
i followed this steps using instruction from this site "http://xperiahtcrootingrom.com/how-to-root-xperia-mini-st15i-sony/"
I think i brick my xperia mini, it keeps on restartting over and over again, heres the story,
*first i performed the downgrade to Xperia Mini (ST15i)_4.0.2.A.0.42_CE.ftf gingerbread using guide from "http://xperiahtcrootingrom.com/how-to-root-xperia-mini-st15i-sony/", and it worked and i was able to root it.
*second i performed step 3 of the said guide up to step where you execute “01-local-prop” , then i realized the the firmware i got “4.0.4 firmware” is not appearing in my choices, so i figure its not the right rom, i unplug the usb and restart the phone, then the problem starts, it keeps on restarting over and over, i tried to flash it again to Xperia Mini (ST15i)_4.0.2.A.0.42_CE.ftf but it doesnt work because it keeps on restarting, pls help, it my first time doing root, i know it’s a learning process, i hope you can help me. tnx very much. hope to hear from you soon.
i know that there are same problems with other devices, ive tried to search for it, it does have the same problems but its a different handset, i believed that there are different ways to root for every handset. tnx again, i hope to hear from you guys soon.
Click to expand...
Click to collapse
Well if you again come across the bootloop problem you can check xda university for all around solution "http://xda-university.com/as-a-user/how-to-recover-from-a-bootloop"
And if you are still looking for a way to root your st15i, you can use this easy one click root software, i personally tried it and it works "http://forum.xda-developers.com/showthread.php?t=2219781"
Greetings!!!!
http://forum.xda-developers.com/showthread.php?t=2265805
i think i just ruined my phone
i made a huge mistake, i have mistakenly installed the zip file provided by the good man above on the link
the first instruction was to FLASH KERNEL PROVIDED FROM ZIP
and i INSTALLED it USING CWM
i guess FLASH and INSTALL does not mean the same thing. i am sorry, i am a newbie
please help me fix my phone
i am stuck at the SONY logo, it keeps flashing and flashing it
i connected it to my PC to attempt repair using PC Companion, my PC did not detect anything
I am trying to boot to recovery, but i do not know the keys to press
i searched for it but, nothing works for me
PLEASE HELP ME
PLEASE
I have a sony ericsson xperia neo v mt11i
i have successfully rooted it
i have also successfuly installed the Clockworkmod
Idk about your phone, but 'til you are waitinh search for your phone/ download mode. Check if you have this. It solved my problem like yours
Sent from my GT-I9000 using xda premium
please explain
Zahovay said:
Idk about your phone, but 'til you are waitinh search for your phone/ download mode. Check if you have this. It solved my problem like yours
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
can you please explain it, step by step,
because im a newbie, i just studied this rooting and custom ROM things in two days
i think its not enuf huh.
thanks for the suggestion
Download mode can be achieved by first
power off your device
Try a combo of power and one of the volume buttons
When the buttons light up keep holding till you see a yellow triangle
From there plug into your PC
Then attempt to "flash" back to a working ROM with your PC
For my device(s) download mode is found by using the #1 button on the hard keyboard and the power button at the same time (epic 4G) and for my (my touch 3G) other device it can be found by pressing volume up and the power button.
For your device try the following Google search, just replace the bit between the "<>" with the name of your device and it should pull up a solution by page two of the Google search
"how to"+"download mode"+<name-of-device> similar:XDA
oh and the issue you're having is called a "boot loop" and is usually fixable by going back to stock and re-rooting after.
Sent from either my SPH-D700 or myTouch3Gs
Debian Kit/QEMU Linux Install guide for all android devices that I'm writing:
http://forum.xda-developers.com/showthread.php?t=2240397
Now have working Installers for ARM Java 7 JDK + Maptools + jMonkey
what the above poster saying is applicable to samsung phone... no yellow warning sign on sony phone.... what we call is flash mode.. power button+volume down.. but as ur xperia is older model it could be a power+back button... check whether ur phone is compatible with flash tool by Androxyde and Bin4ry... search and you need ur phones firmware as ftf format....
s-X-s said:
what the above poster saying is applicable to samsung phone... no yellow warning sign on sony phone.... what we call is flash mode.. power button+volume down.. but as ur xperia is older model it could be a power+back button... check whether ur phone is compatible with flash tool by Androxyde and Bin4ry... search and you need ur phones firmware as ftf format....
Click to expand...
Click to collapse
sad to say but it does not boot to recovery or anything,
it just shows the sony logo over and over again
i downloaded the flashtool, already in my pc
currently downloading the ftf files- i guess this is the "stock" build, or ROM
a while ago i tried it with the flashtool but
the flashtool says device disconected everytime the SONY logo disappears
is there any possibility that my phone will be back?
thank you
AND another thing!!
i installed the CWM with my BootLoader Locked
Next time post in your device section and if its a question in Q &A section...
http://forum.xda-developers.com/forumdisplay.php?f=1276
its appears to be a soft brick.... i havent seen/used Xperia Neo b4.. just looked @ pic.. i think 4 ur device it will be power +back button for flash mode and soft reset.... check ur device forum for more details... if i'm correct... press and hold power button +back button until u get one vibrate and let go.. then flash the ftf using flash tool.. usually ftf file are of stock firmware
s-X-s said:
Next time post in your device section and if its a question in Q &A section...
http://forum.xda-developers.com/forumdisplay.php?f=1276
its appears to be a soft brick.... i havent seen/used Xperia Neo b4.. just looked @ pic.. i think 4 ur device it will be power +back button for flash mode and soft reset.... check ur device forum for more details... if i'm correct... press and hold power button +back button until u get one vibrate and let go.. then flash the ftf using flash tool.. usually ftf file are of stock firmware
Click to expand...
Click to collapse
thank you, but sadly again it doesnt boot
i guess i lost my ROM and drivers
PC companion cant even detenct my device, even the flashtool too.
it just charging when i connect it to my PC
and has this battery image with a single blue bar, no animation whatsoever
do you recommend sending it to the SONY service centers??
i did this things only this time because the one year warranty already expired
thank you again, for your help
just a theory
i think my problem here is that, i lost my ROM together with the usb driver
because even flashtool cant detect/read it.
emperorrafael said:
just a theory
i think my problem here is that, i lost my ROM together with the usb driver
because even flashtool cant detect/read it.
Click to expand...
Click to collapse
Hi, Do not panic. I faced a similar problem today, and the best solution for it is using FLASHTOOL to flash the stock .ftf firmware.
From the sticky threads, download the stock ICS firmware for the phone. Also read up on how to use the flashtool.
Try and follow the solution given in the below thread, hit THANKS if it helps!
http://forum.xda-developers.com/showthread.php?t=2402421
ameyk85 said:
Hi, Do not panic. I faced a similar problem today, and the best solution for it is using FLASHTOOL to flash the stock .ftf firmware.
From the sticky threads, download the stock ICS firmware for the phone. Also read up on how to use the flashtool.
Try and follow the solution given in the below thread, hit THANKS if it helps!
http://forum.xda-developers.com/showthread.php?t=2402421
Click to expand...
Click to collapse
thank you for your guide, but i decided to go ahead and restore my phone completely using sony software updater
and i will root my phone again, and start from scratch
just a bit scared, but
lessons are learned when you commit mistakes, no?
thankyou again and
be safe
emperorrafael said:
Greetings!!!!
http://forum.xda-developers.com/showthread.php?t=2265805
i think i just ruined my phone
i made a huge mistake, i have mistakenly installed the zip file provided by the good man above on the link
the first instruction was to FLASH KERNEL PROVIDED FROM ZIP
and i INSTALLED it USING CWM
i guess FLASH and INSTALL does not mean the same thing. i am sorry, i am a newbie
please help me fix my phone
i am stuck at the SONY logo, it keeps flashing and flashing it
i connected it to my PC to attempt repair using PC Companion, my PC did not detect anything
I am trying to boot to recovery, but i do not know the keys to press
i searched for it but, nothing works for me
PLEASE HELP ME
PLEASE
I have a sony ericsson xperia neo v mt11i
i have successfully rooted it
i have also successfuly installed the Clockworkmod
Click to expand...
Click to collapse
i just want you all to know that my xperia neo v is now fixed
i used the SONY SOFTWARE UPDATER
it restored my phone to stock ICS4.0.5 and Build 4.1.B.597
i am very happy now that i revived my phnoe
TO ALL THE PEOPLE HERE THAT GAVE THEIR PRECIOUS TIMES JUST TO HELP ME,
I KNOW THAT I CAN ONLY THANK YOU FOR THIS.
BUT I AM REALLY GRATEFUL THAT THERE ARE STILL PERSONS AS GOOD AS YOU ALL ARE
i will dedicate my spare times reading forums,threads, learning how to PROPERLY install
custom ROMS
so that i can also help the others in need[superhero!!!]
THANK YOU ALL AGAIN
and BE SAFE