[Q] Missing a step in flashing a custom rom on SE X10i - XPERIA X10 Q&A, Help & Troubleshooting

I own a SE Xperia X10i since it got released. Current versions of software in my phone are:
Model: X10i
Android: 2.3.3
Baseband: 2.1.71
Kernel: 2.6.29-00054-g5f01537 / [email protected] #1
Build: 3.0.1.G.0.7.5
Files and programs I have and use:
- Flashtool 2.9.1
- ulBlDoom.zip (for unlocked bootloader, obtained via forumthread of ROM named above)
- x10_gb_DooMKernel-v06-FS_wifi.zip (for unlocked bootloader)
- Speed&Hotfix004.zip
I wanted to flash a the Wolfs TW Gingerbread V7b6 custom ROM, but I had troubles getting the WiFi module to work. Here is what I did:
00) Copied all relevant zipfiles on the sdcard of my phone
01) Used Flashtool 2.9.1 to downgrade kernel with aZuZu loader.sin (supplied with flashtool)
02) Root (using flashtool Root button)
03) Used Flashtool 2.9.1 to upgrade kernel with aZuZu loader.sin (supplied with flashtool)
04) Used flashtool to install xRec
05) Rebooted phone to update Superuser and Busybox to latest version available on market
06) Rebooted in xRec and made a backup of the current rom
07) xRec: Factory Reset (full wipe), wipe Cache, wipe Dalvik as said in Wolfs TW GB thread
08) xRec: Install custom zip (ulBlDoom.zip)
09) xRec: Install custom zip (x10_gb_DooMKernel-v06-FS_wifi.zip)
10) xRec: Install custom zip (Speed&Hotfix004.zip)
10) Reboot phone
At this point the phone reboots and starts loading the new custom ROM. It fully starts and I can see that it actually is the new ROM. All functions seem to work (didn't test much though), except WiFi. Whenever I try to enable wifi from the menu it says "fault", right after pushing the softbutton.
I read all kinds of threads here on the forum, but I am too inexperienced to figure out what is wrong. All the information I find overwhelmes me and confuses me more and more.
Anyone here who can tell me what I missed or did wrong?

First of all man, there is flashtool ver. 7 and u using 2.9? Now u just click root and this is the end.
U should do it again, it will help for sure.
So repair phone in pc companion, reboot, check usb debbuging in settings, turn on newest flashtool, plug in turned on phone to pc, click root (wait a while, phone restarts) do not unplug, click instal xrecovery and this is first part.
If battery is low charge to 100%, copy all files to sd card, reboot in xrecovery, install rom and reboot, i think its better to reboot any time u flash sometnig, not all together. So reboot do not do anything skip everything wait a 5 min and reboot in xrec again then install wifi fix and reboot, not so sure about this Speed&Hotfix004.zip i cant remember Ive installed them, but for now try just rom and wifi fix and let me know will it work for u

netox187 said:
First of all man, there is flashtool ver. 7 and u using 2.9? Now u just click root and this is the end.
U should do it again, it will help for sure.
So repair phone in pc companion, reboot, check usb debbuging in settings, turn on newest flashtool, plug in turned on phone to pc, click root (wait a while, phone restarts) do not unplug, click instal xrecovery and this is first part.
If battery is low charge to 100%, copy all files to sd card, reboot in xrecovery, install rom and reboot, i think its better to reboot any time u flash sometnig, not all together. So reboot do not do anything skip everything wait a 5 min and reboot in xrec again then install wifi fix and reboot, not so sure about this Speed&Hotfix004.zip i cant remember Ive installed them, but for now try just rom and wifi fix and let me know will it work for u
Click to expand...
Click to collapse
Flashtool version 8 even! Don't know how i got to 2.9. Perhaps found it somewhere in the Demonlord kernel thread. The full folder name is "FlashTool_0.2.9.1-GBready_root_xRec".
I am going to try what you said, do the rooting and unlocking part, and then install the ROM.
On the previous attempts the rooting etc. went fine though. Got exactly the same results as suggested by the various how-to's explaining the procedure.

Related

Infinite Rebooting on X10i (Beta 4)

So, I tried installing zdzihu's Beta 4 today through xrecovery after updating my phone to the latest baseband (.54) through SEUS. The ROM installs successfully, but I'm stuck in an infinite loop of reboots afterwards. If I go to the phone information in settings, it says the baseband is "unknown". There is no phone reception either. When I flash the default 2.1 firmware back onto the phone, it works fine.
Anyone have any suggestions for me? I've tried re-doing every step more than 3 times now, and 2 and a half hours later I'm nowhere
Thanks!
go to adb shell, su mode then tpye killall servicemanager
Use Xrecovery menu from boot-up.
You know...When Sony Ericcson appears when switched on, press the back button a few times?
Then do a Clear User Data (Factory FULL Reset)
THEN try to boot back up.
You have no baseband in About Phone because it was getting conflicts from your stock SE rom.
If it still doesn't work
Use Flash For X10 to put the Stock 435 with baseband .54 back on make sure that work ok, root it using the same Flash software, install busy box and Xrecovery then...
Re-Boot back into Xrecovery
Wipe User data
Install Custom zip etc etc to get Beta 4 running again.
Thanks for the tip! I tried a different stock image and it works fine now.
ALERT ALERT cpu works 100% always in stock roms this will burn

[Q] Unable to install custom ROM - WB-XPERIA TW Gingerbread V4.0.0

Hi,
I have installed the Android GB 2.3.3 in X10i using SE PC companion software 2 days back. phone is working really fast, battery life improved. I have installed X-recovery and rooted my phone after getting the necessary guidance. the phone is rooted now and i can reboot into x-recovery.
I want to install custom ROM by WB-XPERIA TW Gingerbread V4.0.0. I have downloaded and copied the .zip file to my SD card. i rebooted in x-recovery, but when i update the custom.zip, it give me a error
" E: can't mount SD card
Installation aborted
please guide me on this as soon as possible
Regards
Uday
I think that maybe this is caused if you are not using the latest version of x-recovery. Wolf wrote about it at the the start of the thread under the installation instructions. You could try that. Someone else here might be able to advise you better...
Hi,
correct you need a GB ready xRec version. There is an update for the FlashTool which contain this new version.
Ralf
udayjani said:
Hi,
I have installed the Android GB 2.3.3 in X10i using SE PC companion software 2 days back. phone is working really fast, battery life improved. I have installed X-recovery and rooted my phone after getting the necessary guidance. the phone is rooted now and i can reboot into x-recovery.
I want to install custom ROM by WB-XPERIA TW Gingerbread V4.0.0. I have downloaded and copied the .zip file to my SD card. i rebooted in x-recovery, but when i update the custom.zip, it give me a error
" E: can't mount SD card
Installation aborted
please guide me on this as soon as possible
Regards
Uday
Click to expand...
Click to collapse
Search the forum for Xrecovery-GB ready.
Try this >>>>> http://forum.xda-developers.com/showthread.php?t=859571&highlight=xrecovery
unable to install custom ROM
GaryMick said:
I think that maybe this is caused if you are not using the latest version of x-recovery. Wolf wrote about it at the the start of the thread under the installation instructions. You could try that. Someone else here might be able to advise you better...
Click to expand...
Click to collapse
I already have the latest version of xrecovery 0.3, but still i am getting the same error.
I checked in some of the forums and I heard that we cannot install a custom ROM with rooted android 2.3.3. we need to flash android 2.1 and install this custom ROM which has got the latest kernel and baseband .71. Is that true, can anyone confirm it ?
Regards
Uday
udayjani said:
I already have the latest version of xrecovery 0.3, but still i am getting the same error.
I checked in some of the forums and I heard that we cannot install a custom ROM with rooted android 2.3.3. we need to flash android 2.1 and install this custom ROM which has got the latest kernel and baseband .71. Is that true, can anyone confirm it ?
Regards
Uday
Click to expand...
Click to collapse
I recommend flashing back to 2.1, extra step but it's worth it having the clean install.
What I did:
Flash 2.1 in Flashtool
Root 2.1 in Flashtool
Install Xrecovery in Flashtool
Reboot in Xrecovery
Factory reset
Wipe cache
Wipe dalvik
Wipe battery stats
Flash GB ROM
Do NOT reboot, remove battery to reset phone
Flash BB .71 in Flashtool
Reboot and ur good to go!
I haven't had any problems since I switched back to WB's new version
hhill13 said:
I recommend flashing back to 2.1, extra step but it's worth it having the clean install.
What I did:
Flash 2.1 in Flashtool
Root 2.1 in Flashtool
Install Xrecovery in Flashtool
Reboot in Xrecovery
Factory reset
Wipe cache
Wipe dalvik
Wipe battery stats
Flash GB ROM
Do NOT reboot, remove battery to reset phone
Flash BB .71 in Flashtool
Reboot and ur good to go!
I haven't had any problems since I switched back to WB's new version
Click to expand...
Click to collapse
I would go with this also if you are having problems. You can get the stock 2.1 ROM if you need it by searching for the Flashtool. The stock ROMs are on the same post (I cant add links here, sorry!).
I'm also on V4 of Wolfbreak ROM and it's the best one i've used so far!

[Q] Bricked x10 HELP!

Hello guys,
as a last resort I turn to you for help. Have been searching for the answer for the last 2 days. I am running CWM-based Recovery v.6.0.1.1 and have a rooted x10 together with an unlocked bootloader. I flashed the recovery without any problems and installed miui v4 but an older file which was very unstable (without any problems). Then I decided to install the newer version so i downloaded it, placed it on my sdcard and in the same recovery flashed rom. Unfortunately I had my usb cable plugged in all the time (during installation). Installation got stuck in the middle and nothing could be done so i removed the battery and started the phone again (this time without the usb cable). When I tried to reinstall that rom again it gave me status 7 error installation aborted, assert failed:getprop,error in sdcard and things like that. So I tried the ROM which had already worked on my phone but received exactly the same message. What is more usb storage mounting in the recovery doesnt work anymore (but it already worked!). Now the problem is that I don't have any system installed and when i try to flash the recovery again, flashtool does not recognize my phone (so does windows) and so it leads me nowhere. I think this is definitely problem with the recovery, after the failed attempt to install rom when i had to remove the battery it does not behave normally. Is there any way that I can maybe install another recovery from .zip - i do not even know whether it will install or just sends me another error. Any help would be greatly appreciated
SqU33z3R said:
Hello guys,
as a last resort I turn to you for help. Have been searching for the answer for the last 2 days. I am running CWM-based Recovery v.6.0.1.1 and have a rooted x10 together with an unlocked bootloader. I flashed the recovery without any problems and installed miui v4 but an older file which was very unstable (without any problems). Then I decided to install the newer version so i downloaded it, placed it on my sdcard and in the same recovery flashed rom. Unfortunately I had my usb cable plugged in all the time (during installation). Installation got stuck in the middle and nothing could be done so i removed the battery and started the phone again (this time without the usb cable). When I tried to reinstall that rom again it gave me status 7 error installation aborted, assert failed:getprop,error in sdcard and things like that. So I tried the ROM which had already worked on my phone but received exactly the same message. What is more usb storage mounting in the recovery doesnt work anymore (but it already worked!). Now the problem is that I don't have any system installed and when i try to flash the recovery again, flashtool does not recognize my phone (so does windows) and so it leads me nowhere. I think this is definitely problem with the recovery, after the failed attempt to install rom when i had to remove the battery it does not behave normally. Is there any way that I can maybe install another recovery from .zip - i do not even know whether it will install or just sends me another error. Any help would be greatly appreciated
Click to expand...
Click to collapse
Flash tool recognize your phone? if yes flash any stock firmware and start over
quintas84 said:
Flash tool recognize your phone? if yes flash any stock firmware and start over
Click to expand...
Click to collapse
When I want to flash .tft file and i go to flash mode it does not recognize my phone in windows even though I have installed all the necessary drivers. It starts to flash but then says flashing aborted (this did not happen before, i could flash without any problems). Another problem is that i do not have any rom installed right now so i cannot even switch debugging on and if i remember right, i left debugging off in my previous rom.
Use Sony Update Service. Download from Sony site and install on PC. Follow the instruction, and this will reflash Stock Rom and Kernel (GB 2.3.3). Then, with latest Flashtool, first Root phone again, then flash whatever you want (custom kernels, roms..). You don't need to unlock bootloader again. It remains unlocked.
Sent from my X10i using xda premium
Dzufa said:
Use Sony Update Service. Download from Sony site and install on PC. Follow the instruction, and this will reflash Stock Rom and Kernel (GB 2.3.3). Then, with latest Flashtool, first Root phone again, then flash whatever you want (custom kernels, roms..). You don't need to unlock bootloader again. It remains unlocked.
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Omg - I found solution to my problem - I just changed usb port and it started to flash even using flashtool. Still, many thanks since it helped me find solution

big problem with flashing

Hi all i cant get the flashing to work..
im following the [ROOT][FTF][locked/unlocked]Neo/Neo V Official 4.0.4 ICS 4.1.B.0.431; 4.1.B.0.587. thread
and tried Rosh547467 example
1- ICS 4.0.4(4.1.B.0.587)
2. Still locked bootloader. (my phone is unlocked as what i can see with SE bootloader)
3. Flashed 4.1.A.0.562 kernel using Flash tool. (flashtool wont work, its just stuck in "1- unplug the device window" when i try to flash. so i tried SE Bootloader_Unlocking_Relocking and actually did flash 4.1.A.0.562. BUT choose the version with only the kernel and loader. So now the phone dosent have a rom to work correctly.)
4. Done rooting with the help of DooMLoRD's script. (then tried to use this. just keep geting adb drivers to old or waiting for device.)
these bellow i havent tried becouse im stuck.. :crying: I really need help badly..
5. Flashed back 4.1.B.0.587 kernel using Flashtool.
6. Root success. .Tested with rootcheck apps from google play store.
7. Installed CWM from x-part app downloaded from google play store.
8. Installed Titanium backup app and took back of whole app+data.
9. Downloaded custom ROM Xperia ultimate HD 3.0.2 and installed using cwm reboot recovery.
10. Reinstalled my old applications from google play store and restored data from Titanium backup.
Flashing ftf doesnt require root or unlocked BL. you just need correct drivers and latest flashtool.
But if you have unlocked BL, then via fastboot flash any custom kernel which have CWM preinstalled. then flash SuperUser.zip via CWM. you'll be rooted.
i did get this to flash [boof KERNEL] WITH CWM AND ROOT FOR MT11i BASED ON 4.0.2.A.0.62 FIRMWARE
and installed superuser via cwm
and put the zelly cream 2.5.2 rom in.
but when the phone start up, I just get the sony logo. Then it stops
then i found that zelly cream wants suave-kernel. but now im stuck on no wi-fi..
AW: big problem with flashing
Bjorn_D said:
i did get this to flash [boof KERNEL] WITH CWM AND ROOT FOR MT11i BASED ON 4.0.2.A.0.62 FIRMWARE
and installed superuser via cwm
and put the zelly cream 2.5.2 rom in.
but when the phone start up, I just get the sony logo. Then it stops
then i found that zelly cream wants suave-kernel. but now im stuck on no wi-fi..
Click to expand...
Click to collapse
Try to reboot your phone. Also look if suave requires extra WiFi modules to work. Mostly they can be flashed with cwm.
Gesendet von meinem Galaxy Nexus mit Tapatalk 2
Nop sorry dint help. got suave-kernel-v6 on it now but i cant find any wifi modules..
At last it sorted. In my quest do make the rooting and flashing work i did over look one thing.
You need to
4. Wipe data/factory reset.
5. Wipe cache partition.
6. Wipe dalvic cache under advanced menu.
7. Wipe battery stats under advanced menu.
8. Format data under mount and storage menu.
9. Format system under mount and storage menu.
10. Format cache under mount and storage menu.
before you install the Rom :silly:
But now my wife wont kill me, becouse i played with her phone :victory:

[Q] Need Help : Install Instruction for FeraLab GB v29 ~Sirius~ ROM

Hi all X10 fans..
I am also 1 of X10 fan.
I have X10 with
Model - X10i
Android version - 2.3.3
Baseband version - 2.1.71
Kernal version - 2.6.29-000540g5f01537
[email protected] #1
Build number - 3.0.1.G.0.75
I have Installed a 2.3.3 year ago with the FlashTool only, without using xrecovery or other recovery s/w,
and haven't got attracted by any other ROM ever since i have seen your fantastical work of feravolt for.
I would like to go for Installing FeraLab GB v29 ~Sirius~ ROM now,
But For the Initial Start I would like to ask you for a little push.
The way feravolt have specified in "feralab.ru" is a bit Fast, and as i said i was not into upgrading from last 1 year.
Would you please make this simple for me.
I just wanted to know,
1) how can i Install his ROM in my X10 (as specified details above)..?
2) I have Superuser installed in my phone, do i need to Root it. if yes then how?
3) How to find my device have "unlocked bootloader"..?
and if not then how to do it..?
4) is it only installed using xRecovery and not by Flashtool, if yes then how to Boot in Recovery...?
5) How to make partitions.?
6) and further process "Using Aroma ROM Installer thing."..
Thank you in advance for the help..
Note : If some 1 is from India please msg me your contact number so i can talk with you.
If you have Superuser installed on your phone that means it's rooted.
For your bootloader question check this:
http://forum.xda-developers.com/showthread.php?t=1254087
From Fera's site download the ROM and Kernel (locked or unlocked depending on whether you unlocked your BL).
Download latest flashtool and flash the kernel.
Turn on the phone and keep pressing the back button till recovery loads.
You can partition the SD card here if you wish (will delete all data on SD)
Do a clean wipe of everything (data, system, cache, dalvik)
Install the ROM
If you unlocked your BL d/l and install the wifi drivers.
Reboot.
Good luck...

Categories

Resources