Rite,
İ am new to ROMs and everything. İ downloaded FOXHOUND Sniper Wolf ROM. İ followed the instructions which are:
1. Boot into recovery mode
2. Format System / Factory Data Wipe
3. Wipe cache and also wipe dalvik cache
4. Install the zip file and you will get the CWM install completed message.
5. Select Reboot Now and let the phone boot up to an Android setup screen.
6. Setup the phone as requested
7. Reboot the phone into recovery mode again and wipe cache and dalvik cache again
8. Reboot phone and everything should be working...
On stage 5. my phone loads up to the android setup screen but a message comes up saying:
'Select and application for the USB device' and below that it says 'no application can perform this action' and another message below that ' %1$s is not responding. would you like to close it'.
İf İ try to do anything the phone just reboots and the same process keeps repeating. İ have searched but cannot find anything relating to this problem. Please help me....
reflash the ROM,
not helped, download the rom again and flash
still not helped select someother ROM
ZACQ8 said:
reflash the ROM,
not helped, download the rom again and flash
still not helped select someother ROM
Click to expand...
Click to collapse
Thank you for your reply but can you be a little bit more specific as İ am a newbie, İ really appreciate the help...
So i re installed the ROM but still have the same problem...
The phone does not boot for me to download another ROM.
Any other solutions?
save your important data from sd card(internal card) , copy to computer , make a hard reset(erase all internal data) flash a new rom via odin , root with cf-root via odin(i recomand xila 2 witch cf-root that u find here on xda,and xila2 room too, and then download the rom you wanted put it on your sd card,go to recovery wipe cache dalvik,wipe data factory reset,install the rom u want. after u may pasye the data you saved before on computer. good luck. for example u can save all your data witch titanium backup.
Download again the rom
Make a full wipe, factory reset,
Reinstall the rom
If that doesn't work
Install via Odin a CF root rom, and use other rom, like cm9
Sent from SGSII//CM9 >>xBlackDroid<<
enigmatyq said:
save your important data from sd card(internal card) , copy to computer , make a hard reset(erase all internal data) flash a new rom via odin , root with cf-root via odin(i recomand xila 2 witch cf-root that u find here on xda,and xila2 room too, and then download the rom you wanted put it on your sd card,go to recovery wipe cache dalvik,wipe data factory reset,install the rom u want. after u may pasye the data you saved before on computer. good luck. for example u can save all your data witch titanium backup.
Click to expand...
Click to collapse
if you dont want to make that steps you may do this : go to recovery, mounts&storage, format cache , format data , format system , them reflash your rom from recovery , after this wipe cache wipe dalvik wipe data , and the fix permissions.
Rite, so İ can recover my phone by loading another ROM via ODİN?
Sorry to be a pain, but İ am a dummy when it comes to this stuff...
muzzyx said:
Rite, so İ can recover my phone by loading another ROM via ODİN?
Sorry to be a pain, but İ am a dummy when it comes to this stuff...
Click to expand...
Click to collapse
yes you can.
don.t panic,that.s the reason for xda exist,to help pples.
muzzyx said:
Rite, so İ can recover my phone by loading another ROM via ODİN?
Sorry to be a pain, but İ am a dummy when it comes to this stuff...
Click to expand...
Click to collapse
Yeah man, download some from general section
Sent from SGSII//CM9 >>xBlackDroid<<
enigmatyq said:
yes you can.
don.t panic,that.s the reason for xda exist,to help pples.
Click to expand...
Click to collapse
Thank you
ok, so how can İ download the ROM again and install all over if my phone is not booting?
muzzyx said:
Thank you
ok, so how can İ download the ROM again and install all over if my phone is not booting?
Click to expand...
Click to collapse
well do what i say in the first post,install that rom via odin,root,and after download the rom u want in your phone and flash it.
flash this http://hotfile.com/dl/146503450/02dbdd0/I9100XILA2_I9100OXIKK1_ITV.zip.html then flash this http://download.chainfire.eu/137/CF-Root/SGS2/CF-Root-SGS2_XI_ITV_LA2-v5.0-CWM5.zip and then install the rom u want...remember to do a hard reset..and all i posted in first post.
just found this thread http://forum.xda-developers.com/showthread.php?t=1449771
İs it ok if İ follow the instructions?
Related
I'd really appreciate some help guys, I've searched everywhere but can't seem to find answers.
I had Cyanogen Mod 9 rooted on my phone, however, I decided to install Omega instead, I installed it but I can't get on it! Everytime I install zip and reboot, it goes back to CWM Recovery!
The procedure was:
-deleted all files in internal SD
-Reboot into CWM Recovery
-Wipe data,cache,dalvik
-install zip from sd card
and now im stuck
Please help, and apologies if any noob mistakes were made
Cupuffy said:
I'd really appreciate some help guys, I've searched everywhere but can't seem to find answers.
I had Cyanogen Mod 9 rooted on my phone, however, I decided to install Omega instead, I installed it but I can't get on it! Everytime I install zip and reboot, it goes back to CWM Recovery!
The procedure was:
-deleted all files in internal SD
-Reboot into CWM Recovery
-Wipe data,cache,dalvik
-install zip from sd card
and now im stuck
Please help, and apologies if any noob mistakes were made
Click to expand...
Click to collapse
You'll lose all your data but do a factory reset and wipe your system in addition to what you've already done and re flash the rom. FYI always have a nandroid backup around before flashing. It's time consuming but saves you a lot of grief in the long run
Sent from my GT-I9300 using xda app-developers app
demondor said:
You'll lose all your data but do a factory reset and wipe your system in addition to what you've already done and re flash the rom. FYI always have a nandroid backup around before flashing. It's time consuming but saves you a lot of grief in the long run
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
How do I do a factory reset? My phone is on loop and boots up only into CWM Recovery, should i re download stock firmware and odin it into my phone? thank you so much for helping out
I don't have much on my phone so i didnt back up =[ what a mistake
Cupuffy said:
How do I do a factory reset? My phone is on loop and boots up only into CWM Recovery, should i re download stock firmware and odin it into my phone? thank you so much for helping out
I don't have much on my phone so i didnt back up =[ what a mistake
Click to expand...
Click to collapse
Factory reset(wipe) is an option in cwm(3rd from above) wipe and reflash the rom and let it boot,this can take 10min
1st check md5 .. it will show u wether its bad download or nt ... and then do this
go into cwm and to wipe data\factory reset wipe cache wipe dalvik and insll rom ..
omega 10 is up so better try omega 10 as its new rom :
hisee said:
1st check md5 .. it will show u wether its bad download or nt ... and then do this
go into cwm and to wipe data\factory reset wipe cache wipe dalvik and insll rom ..
omega 10 is up so better try omega 10 as its new rom :
Click to expand...
Click to collapse
I don't know how to check md5, but I already did the wipes and resintall several times, it still loops back into Recovery mode everytime
Cupuffy said:
How do I do a factory reset? My phone is on loop and boots up only into CWM Recovery, should i re download stock firmware and odin it into my phone? thank you so much for helping out
I don't have much on my phone so i didnt back up =[ what a mistake
Click to expand...
Click to collapse
Factory reset is on the main Cwm screen. You can wipe system through the 'mounts and storage' option
Sent from my GT-I9300 using xda app-developers app
demondor said:
Factory reset is on the main Cwm screen. You can wipe system through the 'mounts and storage' option
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks, I've tried it just now and its still not working...
As said above, maybe the download is damaged, redownload and flash.. Good luck..
Huupie said:
As said above, maybe the download is damaged, redownload and flash.. Good luck..
Click to expand...
Click to collapse
How would put it into my internal SD if I can't transfer the file because I can only boot into Recovery or Download mode? Do I just Odin it straight in via the PDA option?
If you connect your phone with the PC while in recovery you should be able to use adb commands
Put the rom file into the adb folder than try
Code:
adb devices
now you should see any cryptic combination of letters and numbers in the next row
(if you see a empty row... that wouldn't be nice^^)
then do:
Code:
adb push yourromfile.zip /sdcard/yourromfile.zip
than try flashing again the new file
dont forget to do a full wipe, cache wipe, dalvik wipe, the common procedure^^
PS:
If you don't know about adb, it is installed with the android sdk, but you can download it seperately
place the ADB folder somewhere on you system hd, maybe directly to C:\
the open cmd and type
cd C:\ADB\
now you're able to use the above commands
You can put it on an external sd and flash it from there...
Verstuurd van mijn GT-I9300 met Tapatalk
Thank you, all of you... I will try this tomorrow and tell you guys how it goes!
Thank you so much EVERYONE, It all worked out, seems like the original file was corrupted, now running omega 10 smoothly!!!!!!!
HELP needed ..!!
okay, so i followed this steps ( http://www.youtube.com/watch?v=7tgmmQgRrZw ) to unlock bootloader of my wt19i .. did it as it is shown .. now my phone is stuck in the logo sign when i'm trying to turn it on !! need help asap.
prds359 said:
HELP needed ..!!
okay, so i followed this steps ( http://www.youtube.com/watch?v=7tgmmQgRrZw ) to unlock bootloader of my wt19i .. did it as it is shown .. now my phone is stuck in the logo sign when i'm trying to turn it on !! need help asap.
Click to expand...
Click to collapse
Okay so here's a solution
1. Download flashtool first from here
2. Download ICS stock ftf from here
3. Now flash the ftf to your phone in FlashMode, when connected to PC
if any further query, let me know
Happy Flashing
thank u so much @Sangeet007 .. solved my purpose
Having another problem ..
didn't want to create another thread for this ..
so continuing here ..
Rooted completely & unlocked boot-loader of my wt19i ..
but CM 9.1 isn't installing ..
trying to flash it from CWM & it's showing
"E: Error in/sdcard/cm-9.1.0-coconut.zip
(Status 7) Installation aborted."
help needed ASAP ..
seems like if we don't create new thread, no one's going to notice !!!! :'(
HELP needed here ! please .!
Download the rom again and transfer it to your phone. Flash the kernel from inside the rom.zip, then flash the rom after performing wipe data/factory reset and wipe cache
Sent from my Nexus 4 running Android 4.3
facing the same problem! can it be done with any software like flashtool or such?
prds359 said:
facing the same problem! can it be done with any software like flashtool or such?
Click to expand...
Click to collapse
No, you have to flash it using cwm
Could it be you wiped /system before flashing? Because you shouldn't do that!
So there's the problem !!!
what i did -
wiped data/ factory reset
wiped cache partition
wiped dalvik cache ..
Solution please
prds359 said:
So there's the problem !!!
what i did -
wiped data/ factory reset
wiped cache partition
wiped dalvik cache ..
Solution please
Click to expand...
Click to collapse
After wiping delvic cache did u frmat the system ,data ,cache which located in the advanced tab ???
can u gve me the link that the rom ur trying to install??
*first flash the recommended kernal
*Wipe Data/Factory Reset
*Wipe Cache Partition
*Wipe Dalvik Cache
*Go to Mounts & Storage
*Format Data
*Format Cache
*Format System
*Install zip from sd card
**if isnt work this again please try to install anyother rom and see what happen ...
downloaded the file from the official site ( http://download.cyanogenmod.com/?device=coconut&type=stable )
1. no i didn't format the system after wiping dalvik cache.
2. from where & how do i flash the kernel? i have downloaded the ROM & the Gapps.!
prds359 said:
downloaded the file from the official site ( http://download.cyanogenmod.com/?device=coconut&type=stable )
1. no i didn't format the system after wiping dalvik cache.
2. from where & how do i flash the kernel? i have downloaded the ROM & the Gapps.!
Click to expand...
Click to collapse
The kernel is the boot.img inside the zip. If you want to know how to flash it, check my guide on how to install a custom rom/kernel
And you could do the following:
1. Open the zip
2. Go to META-INF/com/google/android/
3. Open the updater-script using notepad ++
4. Delete the first 3 lines saying "assert getprop"
5. Save it and repack the zip
6. Flash it
Maybe it works then! :good:
mihahn said:
The kernel is the boot.img inside the zip. If you want to know how to flash it, check my guide on how to install a custom rom/kernel
And you could do the following:
1. Open the zip
2. Go to META-INF/com/google/android/
3. Open the updater-script using notepad ++
4. Delete the first 3 lines saying "assert getprop"
5. Save it and repack the zip
6. Flash it
Maybe it works then! :good:
Click to expand...
Click to collapse
did exactly what was described to your link to flash the kernel ..
it was successful.. but my phone is stuck to the Logo when am trying to turn it on ..
another problem is, in CWM menu the back key (power button) isn't working at all ..
what should i do next?
have attached the error screen.
Then flash a another kernal ,stuck on the logo happens coz the flashed kernal didnt support very well for ur android version.
Sent from my WT19i using xda premium
can you please suggest me a good ROM & kernel for WT19i please?
i was trying CM 9.1
Kernal-rege,kappa,lupus
Rom-honami i1,flawless ICS,next gen 7rom
Sent from my WT19i using xda premium
Arrow11 said:
Kernal-rege,kappa,lupus
Rom-honami i1,flawless ICS,next gen 7rom
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
okay so i flashed this ( http://forum.xda-developers.com/showthread.php?t=2167119 ) kernal ..
phone still won't work after logo sign ..
and am unable to access phone's memory card. ..
pc is't detecting it anymore!
what to do now?
prds359 said:
okay so i flashed this ( http://forum.xda-developers.com/showthread.php?t=2167119 ) kernal ..
phone still won't work after logo sign ..
and am unable to access phone's memory card. ..
pc is't detecting it anymore!
what to do now?
Click to expand...
Click to collapse
when sony logo appears plz start to press vol- rapidly..u can acces to recovery there..in there u can mount ur sd card using mount and storage option .if u cant acces to recovery u should flash this kernal http://forum.xda-developers.com/showthread.php?t=1398910
i recovered most of 4ns using rege kernal
no progress with rage kernal too! stuck to logo sign.
phone was running well before flashing any kernal.
is there any way to take it back to that position again?
**phone is rooted & boot-loader is unlocked.
prds359 said:
no progress with rage kernal too! stuck to logo sign.
phone was running well before flashing any kernal.
is there any way to take it back to that position again?
**phone is rooted & boot-loader is unlocked.
Click to expand...
Click to collapse
Flash the stock rom in flashmode using flashtool. If you don't know how to do that, use the search
Sent from my Nexus 4 running Android 4.3
I just rooted my phone yesterday and i tryed to flash a new rom but it keeps on showing the start up screen for all my roms i tried to flash plz help
what to do
Tuyeni-boy said:
I just rooted my phone yesterday and i tryed to flash a new rom but it keeps on showing the start up screen for all my roms i tried to flash plz help
what to do
Click to expand...
Click to collapse
Install via CWM. Instructions can be found in CWM and ur ROM thread.
Sent from my frozen Penguin's Nexus 7 with frozen CM 10.2 using frozen Tapatalk 4.FORGOTTEN Pro
Flash a custom rom with cwm..
wipe your data/system first.
wipe catche
install from sd card (Flashable file must be store in root of your sdcard.)
wipe catche
wipe dalvik catche
Imp:
Make your currunt working rom backup before anything you do with your phone. it will save you.
Tuyeni-boy said:
I just rooted my phone yesterday and i tryed to flash a new rom but it keeps on showing the start up screen for all my roms i tried to flash plz help
what to do
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1552792
go to this post and flash the stock firmware via odin.
for installing custom rom, you will need root and cwm
go to recovery mode
choose install zip from sd card
choose the cwm file
this will install the cwm.
now wipe data and cache
go to advanced menu and wipe dalvik cache
then go to choose zip from sdcaed and select the rom
please make sure that you are using a proper custom rom file meant for your phone.
hit thanks if it helped
Hello
Im bored by using android 4.2 from many years, i want something new in my device
im tired of finding how to install cyanogen in lenovo A680
i dont know from where i can get working stock ROM of Lenovo A680
and i dont know how can i port rom perfectly
i hope you can help me !
Hi
For install ROM anywere(cyanogen/MIU/Stock):
Put the firmware(ROM.zip) archive to SD-card,
Switch off your phone
get into recovery (You need to CWM: forum.xda-developers. com/android/general/rooting-twrp-cwm-lenovo-a680-row-t3036490 ):
- Go to the backup and restore, create a backup of the current state of your machine,
- Wipe Data / Factory Reset -> delete all user data
- Wipe Cache Partition -> Wipe cache
- Advanced -> Wipe Dalvik Cache -> Wipe Dalvik Cache
Next Install zip from sdcard -> choose zip from sdcard -> Select the firmware and install and reboot.
OR: Install Stock Rom and put ROOT for unistall apps system, and install Theme/Xposed Modules.
maxnuk said:
For install ROM anywere(cyanogen/MIU/Stock):
Put the firmware(ROM.zip) archive to SD-card,
Switch off your phone
get into recovery (You need to CWM: forum.xda-developers. com/android/general/rooting-twrp-cwm-lenovo-a680-row-t3036490 ):
- Go to the backup and restore, create a backup of the current state of your machine,
- Wipe Data / Factory Reset -> delete all user data
- Wipe Cache Partition -> Wipe cache
- Advanced -> Wipe Dalvik Cache -> Wipe Dalvik Cache
Next Install zip from sdcard -> choose zip from sdcard -> Select the firmware and install and reboot.
OR: Install Stock Rom and put ROOT for unistall apps system, and install Theme/Xposed Modules.
Click to expand...
Click to collapse
Thanks for those step by step answer.!
sure i will follow your step when i will install ROM
oh well, can you tell me from where i can get Cyanogen for Lenovo A680 ?
Do you test: youtu.be/RyVakGPT11I
but I'm not sure...(Backup!)
maxnuk said:
Do you test: youtu.be/RyVakGPT11I
but I'm not sure...(Backup!)
Click to expand...
Click to collapse
Thanks for your help
but according to comments, it seems fake rom ,full of bugs! better I Should not try
hey can you tell me how can I port rom and make it compatible with my device?
I'm interested into cyanogen ,I already downloaded both cyanogen 12.1 and 13
I want to make it compatible with my device
I'll be thankful to you
Port rom... you have very bugs. But, to port rom: https://wiki.cyanogenmod.org/w/Doc:_porting_intro
Ideally you get a ready-rom, like the settings of your device and change.
maxnuk said:
Port rom... you have very bugs. But, to port rom: https://wiki.cyanogenmod.org/w/Doc:_porting_intro
Click to expand...
Click to collapse
I'm Sorry if I bother you
wow your answer is Really so awesome
im going to read all the contents!
Thanks Really!
Your specs: Chipset:Mediatek MT6582 // GPU: Mali-400MP2 // 4 GB Rom, 1 GB RAM.
Try: http://www.mtkroms.com/2016/02/marshmallow-cyanogenmod-13-for-mt6582.html
maxnuk said:
Your specs: Chipset:Mediatek MT6582 // GPU: Mali-400MP2 // 4 GB Rom, 1 GB RAM.
Try: http://www.mtkroms.com/2016/02/marshmallow-cyanogenmod-13-for-mt6582.html
Click to expand...
Click to collapse
you are the boss!
Really your answer is interesting
soon I'll be downloading it
but I afraid little bit, Because just 2 day ago I tried to flash custom rom and it stuck at booting logo
I was unable to boot into recovery too
then I give it to service center, and then my device working today
XD You need not have gone ... Boot loop, that always happens..
maxnuk said:
XD You need not have gone ... Boot loop, that always happens..
Click to expand...
Click to collapse
Haha Thanks dude...hey do you know how can I flash custom rom in computer? using emulators?
so that I can test whether rom is working Fine or not, so that I can avoid risk on my device
Do you have skype ?
maxnuk said:
Do you have skype ?
Click to expand...
Click to collapse
yes I've
Do you use Smart Phone Flash tool ?
maxnuk said:
Do you use Smart Phone Flash tool ?
Click to expand...
Click to collapse
I know how to use it, but I didn't used,Because last time I tried to flash rom using TWRP
you know What was Good wrong?
I did wipe cache and data, after that, I tried to install custom rom zip, and I found it's corrupted!
so, I ended up with bricking my device
that's why I want to flash rom in computer first!! Haha
when you bricked your phone, you could not get into TWRP ?
maxnuk said:
when you bricked your phone, you could not get into TWRP ?
Click to expand...
Click to collapse
yes right!! and even I was unable to get into recovery mode using key combination
just use that Smart Phone Flash tool..
maxnuk said:
just use that Smart Phone Flash tool..
Click to expand...
Click to collapse
Oh Thanks for that.. sure I'll use it next time...but still I afraid of bricking! do you have any idea how can I flash custom rom in computer emulator? so I can make sure rom is working Fine or not
I do not know. I recommend you not flash rom.
so i factory reset my grand quattro and i cant boot into system,every time i try to boot it goes into cwm recovery screen and now there is an option to flash rom via zip but i dont have any rom as i reseted my internal card so what will i have to do ?
Did you reset your phone from reset option availabale in cwm?
Did you wipe cache?
Did you wipe dalwik cache?
zooperaj said:
Did you reset your phone from reset option availabale in cwm?
Did you wipe cache?
Did you wipe dalwik cache?
Click to expand...
Click to collapse
yes i did
If you took backup of your original rom, try to restore it
And if you did not backup, try to flash original rom thru odin
download the rom using pc and transfer it to memory card ,put the memory card into ur phone and then flash it through cwm recovery
arjuntsgowda said:
download the rom using pc and transfer it to memory card ,put the memory card into ur phone and then flash it through cwm recovery
Click to expand...
Click to collapse
Thanks i did get into system by installing new rom droid win now it says supersu needs update but i cant cause it says installation of binaries failed ,otherwise my phone is working as expected or even better, :highfive:
granddd said:
Thanks i did get into system by installing new rom droid win now it says supersu needs update but i cant cause it says installation of binaries failed ,otherwise my phone is working as expected or even better, :highfive:
Click to expand...
Click to collapse
Even i have droidwin5 release 3.2.4
But i never had problem with updating supersu binaries.
I think there are two methods, either normal or flashing through cwm.
Try both