Created myself a flashable build.prop script, that I thought I would share. This script will take your phone to the extreme, and make it feel like new. Everything is faster, even web browsing. Also, some minor battery tweaks are included, that might allow you to see some increase in battery life.
The script will add various tweaks I have found scouring the interwebs. Most of the tweaks can be found here.
Some developers may have already added these tweaks into their roms, but I haven't seen a rom that had them all. The script will not duplicate any lines in the build.prop file to avoid confusion/issues.
**Please note: testing is limited, as I have only ran this using Amon Ra recovery.
That said, a backup of the build.prop file will be created in the "/system/" directory called "build.prop.old". If you have any issues, you can always revert back with a simple adb command or using root explorer app.
**This should work on any rom that has busybox
**v2+ can be flashed over v1, it will not overwrite your original build.prop(.old)
**might have to turn off data then turn back on after flashing v2
**init.d script will worrk on any rom/kernel that has init.d scripting enabled
PRO's (may be different, on a per rom basis)
- overall smoothness of launcher (sense,nova,golauncher, etc.)
- faster internet speeds (speedtest.net app)
- better touch response (this was downgraded in v2 because of battery life complaints, but I set mine - back up (see changelog, post 2))
- faster application load times ("where's my water" takes about 1/10th of load time for me than prior to tweaks)
CON's (may be different, on a per rom basis)
- system may be unresponsive for GB rom users (remove the line "video.accelerate.hw=1" from the system/build.prop file [near the end of file])
Disclaimer:
As always, use at your own risk. I am not responsible for anything that might happen to your phone.
Requirements before install:
- Must be rooted (99.9% of roms allow root access)
- Rom must have busybox (already installed on 99.9% of roms)
Installation
- download zip onto phone
- reboot into recovery
- (do not wipe anything! this is not a rom!)
- flash the zip
- reboot
- ????
- profit!
If you have any additional tweaks, or if you see I have some settings incorrect please let me know! I'm always trying to take my phone to the extreme!
Un-Installation
- use root explorer:
- go to "/system/" folder
- delete "build.prop"
- rename "build.prop.old" to "build.prop"
- reboot
Change log:
v4 (8/25) -
- modified net settings for faster speeds
- enabled swap and swap management
- added extra sysctl tweaks
- included tbp_fix code
- more
tbp_fix.zip
Run this after flashing turbo prop (no need to run for v4+), if your minfree settings are being overwritten. See this post.
v3 (6/19) -
- modified max events to 200
- added init.d script for more tweaks (your rom/kernel must support init.d)
v2 (6/2) -
- added 4g network tweaks
- modified "windowsmgr.max_events_per_sec" to 150 (try to save some battery life)
this change might reduce performance a little, if you want you can modify the value back to 240
v1 (6/1) -
- initial
If we don't have busybox installed, can we grab it from somewhere?
Sent from my ADR6425LVW
Awesome!
Any Sense version limitations or firmware specifications with this? Or is this a universal flashable for any ROM or firmware? I ask because I am anxious to try it out. Sounds really useful.
Sent from my ADR6425LVW using xda premium
Looks fun I will play =)
There a way to undo just in case?
Sent from my ADR6425LVW using XDA
I Am Marino said:
If we don't have busybox installed, can we grab it from somewhere?
Sent from my ADR6425LVW
Click to expand...
Click to collapse
Should be already installed on your phone if you have a ROM from here. Otherwise search for "busybox" in the play sore.
Sent from my Rezound
Play store, lookup "busybox". Correct me if I'm wrong, lol.
Edit: faster on the draw it seems. Disregard..
Sent from my ADR6425LVW using xda premium
1stCentauri said:
Any Sense version limitations or firmware specifications with this? Or is this a universal flashable for any ROM or firmware? I ask because I am anxious to try it out. Sounds really useful.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
No it's not specific to any ROM or firmware. Should work on any Android.
Sent from my Rezound
danutzz said:
No it's not specific to any ROM or firmware. Should work on any Android.
Sent from my Rezound
Click to expand...
Click to collapse
Nice. Giving this a run shortly. Thanks for sharing this with us!
Sent from my ADR6425LVW using xda premium
Ohschit said:
There a way to undo just in case?
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
Yes, the original post explains that there is a backup of the original build.prop made. If you need specific instructions on how to get this done, let me know... i'm ready to go to sleep right now though, lol.
danutzz said:
Yes, the original post explains that there is a backup of the original build.prop made. If you need specific instructions on how to get this done, let me know... i'm ready to go to sleep right now though, lol.
Click to expand...
Click to collapse
Yes please post a write on how to get back to original build. Thanks and nice work!!!
NAU420 said:
Yes please post a write on how to get back to original build. Thanks and nice work!!!
Click to expand...
Click to collapse
all you do is use build.prop.old in the end. remove build.prop and remove the ".old", recheck permissions then reboot
Thank you for this, notice an improvement while web browsing( ICS smooth) as well as UI smoothness on cleanrom gbe 1.7.5.
Sent from my ADR6425LVW using XDA
Hoping it isn't a placebo effect. Probably has some good tweaks though.
I'll be the one to ask. What exactly will this do?
Sent from my ADR6425LVW using Tapatalk 2
Will this work in GSM...am a bit wary right now to flash something coz i just finished setting up the phone just the way i like it!
briankariu said:
Will this work in GSM...am a bit wary right now to flash something coz i just finished setting up the phone just the way i like it!
Click to expand...
Click to collapse
It should. If not, you can undo the changes. All it does is modify the build.prop and it saves a backup before it does anything.
pwned3 said:
I'll be the one to ask. What exactly will this do?
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
modify's phone settings for performance gains... if you want to learn more, google "build.prop tweaks", or view this thread: http://forum.xda-developers.com/showthread.php?t=1227269
Related
Here is the Build.prop
I re-edited it to get GPU rendering
Very butter-smooth Animation
Added working Flashable Zip
Use streakmod recovery
Zip has the necessary stuff and new bootanimation
Method
1)install root explorer or similar app (i prefer es file manager)
2)Allow root permissions for the file mnager.
3)mount system s r/w
4)copy and replace the build.prop in /system/
With the attached build.prop
After succesfully passing the 4th step
Reboot your device.
Now see the power of your gpu rendered animation
Have a good day.
Enjoy
Download link
Primary
http://www.4shared.com/file/W3sQlMLv/build.html
Mirrors
http://www.multiupload.com/7NMIDQN3VM
Download Link For the strmod flashable zip.
http://www.4shared.com/file/NBTYKA3B/GB_SD_24_CRT_GPU.html
Please dont forget to hit thanks button
just modify build.prop in system like this
debug.composition.type=mdp"
to:
"debug.composition.type=gpu"
thn save and exit (root explorer) and restart.
works perfect on my StreakDroid 2.4.3
Thanks!!! works fine on 2.4.3
Please post in Themes and Apps as this is not development.
Thanks to maxicet for the info re: GPU rendering. I believe DJ_Steve will be adding it default to the next build of GB.
sajibcy said:
just modify build.prop in system like this
debug.composition.type=mdp"
to:
"debug.composition.type=gpu"
thn save and exit (root explorer) and restart.
works perfect on my StreakDroid 2.4.3
Click to expand...
Click to collapse
Much better way of going about this change. IMO
I'm sure many people make changes to their build.prop, myself included. I wouldn't want to replace my current file and then have to make all those changes again.
Worked for me - I had to change Spare Parts to make the animations "Normal" speed to see the CRT animation. Looks beautiful!
Mike's Aria said:
Much better way of going about this change. IMO
I'm sure many people make changes to their build.prop, myself included. I wouldn't want to replace my current file and then have to make all those changes again.
Click to expand...
Click to collapse
oh yea...easy and simple. thnx to maxicet who bring this out.
Great but since the buildprop sets density to 240, the phone process constantly force closes...
Sent from my Dell Streak using xda premium
greekunit690 said:
Great but since the buildprop sets density to 240, the phone process constantly force closes...
Sent from my Dell Streak using xda premium
Click to expand...
Click to collapse
Did you find a fix for this? I'm getting the same FC on the phone process.
juxtyce said:
Did you find a fix for this? I'm getting the same FC on the phone process.
Click to expand...
Click to collapse
Delete the line for the density setting and reboot. It will go back to stock density. If you really want to maintain the new setting, there is a thread on here about it.
juxtyce said:
Did you find a fix for this? I'm getting the same FC on the phone process.
Click to expand...
Click to collapse
You can go up to 180 with no problems...if you want more I read somewhere on here about flashing a zipfile of phone and contacts.apk or just use alternate. I for one like the go dialer and go contacts.
Sent from my Dell Streak using xda premium
I changed the
"debug.composition.type=mdp"
to:
"debug.composition.type=gpu"
But Youtube and any video become white while playing!
HishamN said:
I changed the
"debug.composition.type=mdp"
to:
"debug.composition.type=gpu"
But Youtube and any video become white while playing!
Click to expand...
Click to collapse
which rom u r using? if 2.4.2 thn update to newer. im using 2.4.3. works perfect.
sajibcy said:
which rom u r using? if 2.4.2 thn update to newer. im using 2.4.3. works perfect.
Click to expand...
Click to collapse
Sorry I forgot the version, its same as yours 2.4.3!
I decided that since enough people asked about it, then it probably deserves it's own thread. This thread contains information on how to set up the V6 super charger script on the galaxy note.
**PLEASE FOLLOW ALL INSTRUCTIONS TO ENSURE SUCCESSFUL INSTALLATION/OPERATION OF SCRIPT**
CREDITS:
**ZeppelinRox** Creator of V6 and many great scripts!
WHAT YOU WILL NEED:
A. Rooted phone (duh)
B. Busybox 1.81.1 DOWNLOAD Via GOOGLE PLAY app - **BUSYBOX INSTALLER** https://play.google.com/store/apps/d...N0YWxsZXIiXQ.. (Thanks Capite for the link)
C. (optional) Root Explorer (to mount /system to r/w) can use script manager too
D. V6 supercharger PDF file... which is linked below
*****ICE CREAM SANDWICH USERS**** don't forget to first supercharge your SERVICES.JAR via website....http://android.mimic.ca**********
Flash in Clockwork...... Cache Wipe X2 - Wipe Dalvik - Flash Zip.
Installation Instructions:
Please follow ZEPPELINROX thread here: http://forum.xda-developers.com/showthread.php?t=991276 -
Per his request, i will not create installation instructions...... But if you have questions i will try to help you out since i have used it forever.
________________________ zOOm zOOm _______________________________________
*
*
*
*
SCRIPTS
MOST SCRIPTS CAN BE FOUND HERE: http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021
Hey just a quick heads up...zeppelin is very clear in his thread that he does not want those files posted up in other threads and to link back to his thread. Did you talk to him about creating this thread?
Sent from my SAMSUNG-SGH-I717 using XDA App
00mred00 said:
Hey just a quick heads up...zeppelin is very clear in his thread that he does not want those files posted up in other threads and to link back to his thread. Did you talk to him about creating this thread?
Sent from my SAMSUNG-SGH-I717 using XDA App
Click to expand...
Click to collapse
hmm... no i didn't read up .. i'll check it out and delete if that's the case. i been helping a lot of ppl install because they cannot - def. not taking credit for his work.
edit: he says not to duplicate his install instructions, but he is okay with sharing. so i guess i'll just share and help with questions.
Its not so much that but by going to the original thread it ensures the user gets the most up to date script. The how to is an excellent idea but some of your steps conflict his steps
Another note....#5 suggests we get a paid app via warez....that I know is against the rules you might remove that
BigBison420 said:
hmm... no i didn't read up .. i'll check it out and delete if that's the case. i been helping a lot of ppl install because they cannot - def. not taking credit for his work.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I717 using XDA App
well, i believe it's a free app... or maybe i meant "file explorer" i forget. but my market is jacked up because of a ROM issue. (can't access market)
00mred00 said:
Its not so much that but by going to the original thread it ensures the user gets the most up to date script. The how to is an excellent idea but some of your steps conflict his steps
Another note....#5 suggests we get a paid app via warez....that I know is against the rules you might remove that
Sent from my SAMSUNG-SGH-I717 using XDA App
Click to expand...
Click to collapse
Hi,
Since RC7 does not work.
What version should be used?
V6_SuperCharger_for_Android-Update9_RC6.9.sh.pdf ?
Thanks
Is anyone else really confused about the options in the script and what each one brings? I'm sitting looking at a menu, unsure what to pick :/
BigBison420 said:
ATTACHMENTS - updates/scripts FROM **ZeppelinRox**
**removed attachement update9_RC7 because it was not working on my Gnote**
MOST SCRIPTS CAN BE FOUND HERE: http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021
Click to expand...
Click to collapse
What's wrong with RC7? I installed it successfully on my phone, and it runs. Can't tell much of a difference though.
Is there something specific installation error that you are running into, or do you have a way to check if the script is running correctly? If I try to run /data/99Supercharger.sh again, it tells me the my phone is already supercharged and to verify that "Ran_Supercharger" exists in /data, which it does.
After installing Balance 3, I see no difference in the Go Launcher. LauncherPro is better than ever, and my battery life is now really good.
So... it sort of worked.
re
hey guys,
well i'm just trying to help galaxy note users out (apparently a lot of you are new to this scripting thing).
what personally works for me i recommend. That would be option 13 (bulletproof launcher) and also 768+hp settings.
keilbaca said:
After installing Balance 3, I see no difference in the Go Launcher. LauncherPro is better than ever, and my battery life is now really good.
So... it sort of worked.
Click to expand...
Click to collapse
I use go launcher and the new 2.85 Beta is available. There is a noticable increase in optimization. Lag has lessened a bit. and i'm running SauROM with Da_G's OC kernel.
BigBison420 said:
I use go launcher and the new 2.85 Beta is available. There is a noticable increase in optimization. Lag has lessened a bit. and i'm running SauROM with Da_G's OC kernel.
Click to expand...
Click to collapse
I got the latest script to run on my Note, on stock.
I seen no difference at all.
I'm throwing SauROM on it tonight, because I am having other issues too that the rom should fix, I hope. Citrix wants to auto delete the first thing it sees in Active Directory. I don't think my work would appreciate me if I deleted the entire Servers column in AD.
I would love to install this. But.your instructions differ greatly..you suggest a busting install along withal file explorer install.. He suggests script manager.
And there is some question as to which pdt we should be using.
I have a seperate thread with his install instructions linked. I referenced file explorer because i didn't realize u could mount rw. If your THAT confused u should probably not install it.
Sent from my SAMSUNG-SGH-I717 using XDA
In not confused. To the contrary, i understand almost wholly. But what isnt clear, is whether his instructions are sufficient or that they work with out note.
Its not clear which version of the script we need...or which set of instructions we should use.
Listing a set of instructions in a note specific forum (ones that differ from those elsewhere) implies that the others wont work on our device....or that something could be easier or go wrong.
Thank you for pointig the supercharger mod out. I was unaware of it. With that said, id still like to install it.
Which PDF do we use?
Jamesyboy said:
In not confused. To the contrary, i understand almost wholly. But what isnt clear, is whether his instructions are sufficient or that they work with out note.
Its not clear which version of the script we need...or which set of instructions we should use.
Listing a set of instructions in a note specific forum (ones that differ from those elsewhere) implies that the others wont work on our device....or that something could be easier or go wrong.
Thank you for pointig the supercharger mod out. I was unaware of it. With that said, id still like to install it.
Which PDF do we use?
Click to expand...
Click to collapse
i got u completely - i just listed my walkthrough because some people truly need step by step instructions lol. but the DEV's instructions are plenty IMO
my thread was designed to link instuctions for setup and also discuss which scripts are working for the Gnote (case and point, my experience with update 9RC7 which isn't working for me, but does for another user). for me update 9rc6 works fine.... i would try RC7 too - lot of nice features
keilbaca said:
After installing Balance 3, I see no difference in the Go Launcher. LauncherPro is better than ever, and my battery life is now really good.
So... it sort of worked.
Click to expand...
Click to collapse
IN GoLauncher ---> make sure you set icons to "Default Size" because using LARGE or CUSTOM is one of the main Culprits to lag.... also get the 2.85 version
I have no lag.
Anyone tried this on the ICS leak builds?
Super charger us the best mod to improve speeded etc. however this is my second phone that after super charging my phone doesn't shut down all the way. If i power off then plug it in., it reboots. Also wifi constantly looses data connection. Both issues are related to one of the supercharger tweaks just not sure which one is causing it. Maybe home bullet proof.
Sent from my SAMSUNG-SGH-I717 using xda premium
*Updated to Sensation fingerprint*
Can't download or even play certain apps or games such as Gameloft's N.O.V.A.3?
Follow the below steps to make your HTC ETO 4G LTE disguise itself as a HTC Sensation to get the best of the Google Play Store.
Tested working on stock ROM with Root and SU.
Modern Combat 3, N.O.V.A. 3 tested to work perfectly. All other Gameloft games should work and show up in market.
Please note, if you have a custom ROM, you probably do not want to use this. It will overwrite your ROM creator's settings. It will probably work, but it will take away certain features of their build.prop tweaks.
Users are saying that this kills Google Wallet. I cannot confirm this since I don't use it. Use at your own risk. Please update us if it does or not.
You must be rooted!
BACKUP YOUR CURRENT BUILD.PROP
1. Clear Google Play Store Data (Settings, Apps, All, Google Play Store, Clear Data)
2. Download the build.prop I have attached at the end of this post.
3. Unzip it
4. Use a file explorer such as ES File Explorer and navigate up to /system
5. Copy and paste it over your current build.prop in/system
6. Reboot phone
Clear as mud
*Edit*
Removed manual way to update (Hardcore DIY'ers can Google it)
Updated build.prop to HTC Sensation (pyramid). Apps were showing up before with the Galaxy SII build.prop changes, but downloaded files weren't compatible with our phone. Sensation makes for a better fingerprint.
Thanks for this! Only one thing:
People need to understand that if they're not on the stock ROM (that this build.prop is based off of) that they are risking losing whatever modifications their ROM devs added into build.prop.
Different devs do different things in there....blindly replacing your ROM's build.prop is usually a bad idea.
smw6180 said:
Thanks for this! Only one thing:
People need to understand that if they're not on the stock ROM (that this build.prop is based off of) that they are risking losing whatever modifications their ROM devs added into build.prop.
Different devs do different things in there....blindly replacing your ROM's build.prop is usually a bad idea.
Click to expand...
Click to collapse
True... which is why it's important to manually make the change to the build.prop on your rom. Takes a little work, but worth it.
If you follow these instructions, you cant mess it up.
smw6180 said:
Thanks for this! Only one thing:
People need to understand that if they're not on the stock ROM (that this build.prop is based off of) that they are risking losing whatever modifications their ROM devs added into build.prop.
Different devs do different things in there....blindly replacing your ROM's build.prop is usually a bad idea.
Click to expand...
Click to collapse
Meaning such as CM and MIUI and such? Anything based off of 1.13 or even 1.12 is OK right? Im just curious about that, thats all. Ive been wanting to plat Tigers Woods, and for a $5.24 game, im pretty pissed they wont even remburse me for that ****. Thannks brotha. Thanks to the OP as well
reverepats said:
Meaning such as CM and MIUI and such? Anything based off of 1.13 or even 1.12 is OK right? Im just curious about that, thats all. Ive been wanting to plat Tigers Woods, and for a $5.24 game, im pretty pissed they wont even remburse me for that ****. Thannks brotha. Thanks to the OP as well
Click to expand...
Click to collapse
Meaning anything that's not stock. Viper, PokeROM, Fresh, whatever.
Each developer tends to make their own build.prop edits. If you just make the changes to the stock build.prop that the OP attached and you're running any custom ROM you're overwriting whatever they may have done. Unless your Dev puts the change into his/her ROM, or someone makes a flashable zip for you, for your ROM, just grabbing a random build.prop and using it because it has the edits you want is a bad idea.
I'm using Joelz9614 rom just manually edit. A safe rule is never paste over the prop when you can do the edits yourself if you're not sure if it's modded
Sent from my GT-P6210 using Tapatalk 2
Oh and great post op. You're a life saver!
Sent from my GT-P6210 using Tapatalk 2
Kidromulous said:
I'm using Joelz9614 rom just manually edit. A safe rule is never paste over the prop when you can do the edits yourself if you're not sure if it's modded
Sent from my GT-P6210 using Tapatalk 2
Click to expand...
Click to collapse
Exactly.
One more note guys this will kill google wallet mine was still stuck so not sure about those already set up but changing your device to a non wallet device means no wallet. Just thought I'd add this though we are bound to see people ask about it anyway. Perhaps that can be added to the op
Sent from my GT-P6210 using Tapatalk 2
so i screwed up! i edit manually didnt work maybe i mis spelled.. and then thought i could just flash that build prop posted...and i had just flashed FRESH 5.0 and just kinda now read that i should have changed the build prop with that rom untill the developer had that built in.. any ideas what the hell i can do now?
BAttitude7689 said:
so i screwed up! i edit manually didnt work maybe i mis spelled.. and then thought i could just flash that build prop posted...and i had just flashed FRESH 5.0 and just kinda now read that i should have changed the build prop with that rom untill the developer had that built in.. any ideas what the hell i can do now?
Click to expand...
Click to collapse
OPen the zip for the Fresh ROM, go to /system and pull out build.prop. Push that to your phone, and change the permissions.
Or, flash Fresh over your current installation without wiping.
You could push the original build.prop to your phone from the Rom you are using or reflash
Not Sent
Kidromulous said:
One more note guys this will kill google wallet mine was still stuck so not sure about those already set up but changing your device to a non wallet device means no wallet. Just thought I'd add this though we are bound to see people ask about it anyway. Perhaps that can be added to the op
Sent from my GT-P6210 using Tapatalk 2
Click to expand...
Click to collapse
Won't Gameloft eventually make the market change so that the One-X variants are downloading the HD versions? I would only do this if you have to have it now...
BAttitude7689 said:
so i screwed up! i edit manually didnt work maybe i mis spelled.. and then thought i could just flash that build prop posted...and i had just flashed FRESH 5.0 and just kinda now read that i should have changed the build prop with that rom untill the developer had that built in.. any ideas what the hell i can do now?
Click to expand...
Click to collapse
You could reflash your ROM or ask the dev for this build.prop file to paste over your corrupted one.
it was a damn brick and i could even get to recovery screen... i did volume down and power and the bottom buttons would flash and then finally stopped i then press volume down and power and magiclly i got to the bootloader then the recovery and reflasheed
You removed the changes that needed to be made manually? I applied the Samsung changes and now would like to apply the new sensation changes. I guess I'll dig through the build.prop and check which lines are different
To the OP, why would you remove the changes to the file that can easily be done manually??? It's a simple mod that can be done. Users NOT in the know will replace their their file with yours, only to end up with a mess because they are on a different rom that has somewhat different parameters than what's in your attachment.
gpz1100 said:
To the OP, why would you remove the changes to the file that can easily be done manually??? It's a simple mod that can be done. Users NOT in the know will replace their their file with yours, only to end up with a mess because they are on a different rom that has somewhat different parameters than what's in your attachment.
Click to expand...
Click to collapse
Well I hope these heed his warning or perhaps the thread and they should be ok.
Sent from my EVO using Tapatalk 2
Deleted
fldash said:
Won't Gameloft eventually make the market change so that the One-X variants are downloading the HD versions? I would only do this if you have to have it now...
Click to expand...
Click to collapse
I have nova 3 now so I needed to do it before this it didn't work on my phone
Sent from my EVO using Tapatalk 2
Supressed ROM - v2.2 + Update v2.5
This is not my rom this is originally made by achyut so full credits goes to him original thread here
DISCLAIMER 1:
1. I am not responsible in ANY way if this bricks your phone/ goes into bootloop. You, and YOU ONLY, is responsible for what happened to your phone.
2.No Part of the ROM is copiable. If you want to use any Part/app/tweak/etc, Contact me via PM and ask me. atleast let me know that you used it. am a nice guy
DISCLAIMER 2:
There are TWO cameras in the ROM.
1. The stock Samsung Touchwiz CAMERA - 100% working normnally. front camera, back camera, photo, video - ALL working.
2. A ported LG camera from my previous Optimus device - only primary camera working for snaps.
Credits:
1. Diego-ch - for bringing TWRP to SGS Advance
2. Antonio8297 - the initial update script taken from his ROM.
3. Ra3al - the Xperia home base app.
4. Gabwerkz - my guru. watever i know of, 80% is taught by him.
5. Lidroid - Extended notification toggles.
6. quiny8983 - systl config mod taught to me. thanks
7. hpluslabels - icons for Supressed v1 - the Meego N9 Harmattan icons
9. Vazguard - some icons of Supressed V2
9. PhysX - icons for Supressed v1 - the Meego N9 Harmattan icons
10. Jackietran - most icons for Supressed V2
11. Slaid480 - for Slaidyboost
12. balamu96m - for the genius guide of ICS Style settings. made a few tweaks of my own.
13. burakgon - lagfixer and sqlite optimizer
14. Varun.chitre15 - I studied his settings mod and came to know how to add strings to settings. was able to add my name as Author. Thanks.
14. Samsung - for Stock ROM.
15. Amcee - LG Camera independent compatible library file cook.
16. Zipalignroxx - Supercharger
17. smokin1337 - Core control
18. Master&Slave - The superawesome Statusbar tweaks guide.
19. achyut for this rom
20. Me Messi10 for the port
21. antsm for CWM for galaxy ace 2
22.
Features:
1. Totally Problem free
2. Lidroid Notification toggle port. you can Access the relevant settings by long pressing the icon @ notification toogle. (for Eg - press the wifi toggle for sometime, and you will go to the wifi settings @settings ). Also has access to Quickpanel Settings for customizing them.
3. better, richer Graphics. Newer framework and Statusbar. the Look of the whole ROM is more "Mature" than v!, which was a flurry one.
4. SGS 3 inspired Music player.
5. Nimble Lockscreen mod.
6. Newer icons - that goes better with the phone.
7. Modded phone app and ICS style settings. However, the ICS style settings is a bit different from the conventional one that Balamu96m showed.
8. the Audio tweaks for version 1 integrated in v2.
9. various system tweaks for faster, fluider operations. Am not going to blab on that. use the ROM to find out.
10. Deleted many unneeded widgets like the Se and LG ported toggles, since teh 14 toggles notification is already there.
================================================== ================================================== ==========================================
UPDATE_v2.5
Features:
1. Individual CPU core controlling scripts. You can set individual governors, Maximum frequency, minimum frequency, etc...
2. Suprecharger v9 RC2
3. deleted Samsung keyboard and Touchpal keyboard - the best keyboard according to me - be sure to see the tutorial, there are other gestures than just swipe.
4. following apps added (themed of course) -
a. GTALK
b. the Touchpal Keyboard
c. Terminal Emulator.
d. Flash player.
5. New Statusbar - date @ clear button place, Clear button @ below (aligned left - trust me, it's actually easier than center alignment, use it to believe), EXTREMELY SMALL carrier logo - not totally undone it since it too is actually an information. it's so small that there is no additional space taken (and in the same line as the date), but shows the carrier logo, if in case you want it.
Installation
1. Reboot Recovery
2. factory reset
3. Install
4. Reboot.
HOW TO's:
1. Go to Terminal Emulator -
2. Type "su" (without quotes)
3. Grant Superuser permissions.
4. ---> i) if want to use Core controller - type "cpu" (without quotes) and follow the instructions.
---> ii)if want to use Supercharger - type "supercharger.sh" (without quotes) and fllow the instructions.
Download surpressed 2.2 + merged 2.5 update for galaxy ace 2
http://d-h.st/0lI
for screenshots and more information go to original thread http://forum.xda-developers.com/showthread.php?t=1899843[/SIZE]
it' recommended to use TWRP kernel
nice work will try ,Thanks
Messi10 said:
it' recommended to use TWRP kernel
Click to expand...
Click to collapse
only with TWRP?
what about CWM? Can?
Thanks
Sent from my GT-I8160 using xda app-developers app
Adriangbba6 said:
only with TWRP?
what about CWM? Can?
Thanks
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
u can
i said it's recommended
@Messi10
Can you implement in next release of this rom some init.d tweaks, that hafidzduddin have implemented in TWRP kernel zip package? They give me 300 more points in Antutu and made i8160 a bit faster in response. Supressed ROM can be improved with it a bit.
Remember about that tweaks also, when you will be porting JetMOD rom.
arroyo said:
@Messi10
Can you implement in next release of this rom some init.d tweaks, that hafidzduddin have implemented in TWRP kernel zip package? They give me 300 more points in Antutu and made i8160 a bit faster in response. Supressed ROM can be improved with it a bit.
Remember about that tweaks also, when you will be porting JetMOD rom.
Click to expand...
Click to collapse
u can fash zip provided by hafidzduddin
I know
I just wanted to say, that those couple of lines are are really good optimizations for i8160 and they can be used in porting all other roms.
arroyo said:
I know
I just wanted to say, that those couple of lines are are really good optimizations for i8160 and they can be used in porting all other roms.
Click to expand...
Click to collapse
i want the rom to be the same as ported so i didn't add those i too thinking of adding them
Hello, nice job Messi. I have pair of questions about this ROM. Can you tell to me what files are responsible for moded phone app (including contact app), settings (like in ICS) and lockscreen?
"No Part of the ROM is copiable. If you want to...." Yeah, i read this. i prefer to ask in topic (not PM)
I don't really get it, does this simply work with the stock recovery? Also is it possible to make a flashable zip or provide the files for the original samsung keyboard, that i like better?
Sent from my GT-I8160 using xda app-developers app
gumball3000 said:
I don't really get it, does this simply work with the stock recovery? Also is it possible to make a flashable zip or provide the files for the original samsung keyboard, that i like better?
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
no u need to install custom recovery CWM or TWRP
one 'bug'.. The vibration doesn't work correct and the clock isn't in the status
sdke said:
one 'bug'.. The vibration doesn't work correct and the clock isn't in the status
Click to expand...
Click to collapse
vibration is working with me and the clock is not a bug pull down statusbar you will find it
Messi10 said:
vibration is working with me and the clock is not a bug pull down statusbar you will find it
Click to expand...
Click to collapse
Yeah, but I need to know time a lot because of my job.. Can't you add an option that you can switch it..
How did you setup the vibration stand? Mine is on always, but doesn't vibrate..
ok i try to fix it tomorrow
Messi10 said:
ok i try to fix it tomorrow
Click to expand...
Click to collapse
Thanks mate
You don't have to fix it.
I took the systemui.apk from the 2.2 version and I copied it with ES File manager..
sdke said:
Thanks mate
You don't have to fix it.
I took the systemui.apk from the 2.2 version and I copied it with ES File manager..
Click to expand...
Click to collapse
Did you successfully fixed the vibration?
Sent from my GT-I8160 using xda app-developers app
malamharian said:
Did you successfully fixed the vibration?
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
till now no
malamharian said:
Did you successfully fixed the vibration?
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
I only changed the clock..
Welcome! If you found yourself looking for something like CleanROM based on the new 4.4.2 OTA, then you have come to the right place. Scott has moved on to other devices, so I decided to follow along with what he started. This has been thoroughly tested by myself and others with no issues. Want stability you can trust? I have not had a reboot with this ROM, nor have any testers. For best results, please follow the installation instructions below!
About:
Stock Look & Feel
Stable
Fast & Smooth
Based on the new FND7 OTA from VZW
Features:
Rooted (SuperSU)
Init.d enabled
Busybox
DeOdexed
Bloat Removed
Wifi Tether Fix
3 Way Reboot Menu
Updated Samsung and Google apps in /System
Build.prop tweaks for performance
What works:
Everything
What doesn't:
Nothing!
Credits:
Chainfire for SuperSU
killa408shark for testing
@icedventimocha for 3 way reboot
Phil3759 for the wonderful recovery
scrosler for CleanROM
jbeitel for the 1% battery mod xml's and images
Team N3BULA - @lacoursiere18 ; @Deckoz2302 ; @fkfmfz - Because they are awesome!
Installation:
Must have recovery installed (I recommend either Philz or CWM)
Copy ROM to external SDcard
Flash the new 4.3 firmware with Odin 3.07 from the OTA found HERE!
Reboot to current ROM
Reboot to Recovery
Wipe Data/Factory reset (I always do 3x for good measure)
Wipe Cache (Again, I always do 3x for good measure)
Wipe Dalvik Cache
I recommend formatting System, Cache, Data, and /sdcard (internal memory) on first install but this may not be completely necessary as it will wipe absolutely everything. If you decide to wipe the internal memory, make sure your backups and this ROM is stored on the external sdcard.
Flash ROM
Profit!
A couple things to note:
This is built from the OTA tar. Not another ROM or the leak!
If you use a different kernel, do not report issues until you verify issue with stock (included kernel).
If you do not flash firmware with Odin and use Mobile Odin instead, do not report issues until you flash FW with Odin on the computer.
I am not responsible if you brick your phone, but of course you would know that if you are flashing this.
Of course your warranty is already voided from rooting your phone.
If you would like to use this as a base, please include me in your credits and link to this thread.
I am in general a very busy person, so I like to rely on you and other XDA members to help eachother. That is what this is all about right? I will continue to update this as I feel necessary. With my flashing habit, that may be alot
I built this ROM for my personal use and decided to share because of how well it works.
I am not a themer, so don't expect any fancy themes! If you would like to create a theme and share, please let me know and I will add it to the OP. This goes for any other MOD. I am happy to add things to the builds if they work well and you want to contribute.
Changelog:
Initial Release:
Deodexed
Wifi tether fix
init.d enabled with a few scripts
Zipaligned on boot
build.prop edits
Unsecure boot.img
Secure Storage turned off at the kernel level
Debloated
No knox
4 way reboot
1% battery mod
External SD card fix
Shutter sound menu in camera options
Updated core apps
Busybox
NOTE: UPDATED MYVERIZON ASKS FOR ROOT PRIVILEGES. I DENY IT. I AM NOT SURE WHAT THEY ARE LOOKING FOR. I DO USE THE APP FOR PAYING MY BILL AND WHAT NOT, SO THAT IS WHY IT REMAINS.
Previous Versions:
4/16 Version 4
Fresh start from MJ9 tar
Fixed init.d (and added some scripts I find useful)
Added torch toggle hooks (Flash this separately after first reboot) ***Big thanks to CNEXUS for the guide***
De-Bloat
Added Nova Launcher to System/App (Thanks to TeslaCoil Software)
Added DashClock to System/App (Thanks to Roman Nurik)
Added 1Weather:Widget Forecast Radar to System/App (Thanks to OneLouder Apps)
Re-themed SystemUI for more of a KitKat feel
Wifi Tether fix is included this time
Updated all core apps
Updated updater-script and update-binary (Need updated recovery to flash)
Busybox Updated
Zipaligned on boot
Update SuperSU
1/21 Version 3.1
Re-Bloated to fix stability issues with some apps
Updated Core Apps/Libs (Google and Samsung)
Updated SuperSU - 1.91
Reverted Settings back to list with the option to switch to tabbed
Removed Increasing Ringtone
Turned off "Force GPU Rendering" by default
1/14 Version 3.0
Fixed Custom Boot Animation to /system/media (Thanks to Beanstown106 the binary and jellyhead for the fix)
Added Photo Editor
Removed autorun.iso from system/etc
Infinite Lockscreen pages with all widgets enabled
Updated Gmail to system/app- 4.7.2
Removed sysscope.apk and nfctest.apk from system/app
Removed Group Play
Removed Swype
Removed Icon Glossary from settings
Updated SuperSU - 1.89
Removed Preloadedkiosk Folder
1/3 Version 2.5
Changed Settings to tabbed Settings
Removed Account Icons In Contact List (Google, Exchange, etc...)
Disable the Backup Assistant Popup in Contacts (This annoyed me!)
1% Battery Mod
Disable Fast Dormacy when Tethering
Added Popup Browser
12/28 Version 2.0
More debloat (preinstalled language packs, useless media)
Remove Verizon OTA garbage
Removed System Update from Settings>About
Added Custom Boot Animation Functionality
Enabled Call Button in Contact List
Increase Launcher Scrolling Speed
Enabled Shutter Sound Menu in Camera
Added Reminder Notification Option in Messaging App
Did not fix init.d - Not working correctly so use Univeral Init.d from the Play Store
Enabled infinite scrolling in TW home screens and launcher
Fixed Google Now Calling Out FC
Updated Google Plus in /system/app
Updated Hangouts in /system/app
Updated Google Libs
Note: I recommend a clean install for this build!
12/26 Version 1.5:
Wifi Tether Fix
4.3 Exchange Email Hack - Courtesy of runandhide05
Disabled "Select Input Method" Notification
Reverted Hangouts to release APK (Update from the market after flashing. This fixes video calling.)
Removed more Amazon Bloat
Removed more Zappos Bloat
Note: While I always recommend a clean flash of updates, you may be able to just wipe cache/dalvik cache and flash this update. If you experience any issues however, I ask that you try a clean flash before reporting errors/issues.
Also Note: If you do not clean flash this and use an email exchange account, please remove your exchange account before flashing and re-add it after install. Otherwise you will experience FC issues.
12/23 Version 1.0 - Initial Release
Download:
SR_KK_v1.zip
MD5 for current build:
5e443d45a8cdaed23f4dc2ae66fe2831
Screenshots:
The Screenshot Tab!
XDA:DevDB Information
SR Remix (Sophisticated Rom), ROM for the Verizon Samsung Galaxy Note II
Contributors
krowley3
ROM OS Version: 4.4.x KitKat
ROM Firmware Required: MJ9
Based On: Stock ND7 OTA
Version Information
Status: Stable
Current Stable Version: v1
Stable Release Date: 2014-07-03
Created 2013-12-24
Last Updated 2014-07-03
Flashables
Mine....
Nice, gonna give this a go later tonight on watch!!
Sent from my SCH-I605 using Tapatalk 4 Beta
Thanks for this.
Sent from my SCH-I605 using Tapatalk
Thanks for the credit Krowley3!
Sent from my SCH-I605 using xda app-developers app
Thanks for this. Now I have a reason to move on to 4.3.
:victory:
Upload MD5 was a mismatch. Reuploading now. Sorry for the wait!
wheres the link would love to try
Does the free hotspot hack work on ths rom ?
No matter how many ROMs I try, I always go back to Scott's Clean ROM. I'm backing my phone up right now.... waiting with bated breath!
droidxscott said:
Does the free hotspot hack work on ths rom ?
Click to expand...
Click to collapse
I have not added this yet, but I will in the next build. I just checked and FoxFi on the market works great so you can still tether.
Cooter007 said:
No matter how many ROMs I try, I always go back to Scott's Clean ROM. I'm backing my phone up right now.... waiting with bated breath!
Click to expand...
Click to collapse
nowseewhatudid said:
wheres the link would love to try
Click to expand...
Click to collapse
Deeked said:
Thanks for this. Now I have a reason to move on to 4.3.
:victory:
Click to expand...
Click to collapse
killa408shark said:
Thanks for the credit Krowley3!
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
GateWayGee said:
Thanks for this.
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
Meibs said:
Nice, gonna give this a go later tonight on watch!!
Sent from my SCH-I605 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Link is in the OP. Go get it!
Nice! !
TaPpEd from my nOtEwOrThY N2
Cooter007 said:
No matter how many ROMs I try, I always go back to Scott's Clean ROM. I'm backing my phone up right now.... waiting with bated breath!
Click to expand...
Click to collapse
Trust me I been a fan of CR since I got my note 2 back in march too bad Scott moved to other devices. But krowley3 came through with this rom. in my own opinion this rom is good as CR I been running it for over 24 hrs no reboots no fc this rom is fast smooth and solid. Try it you won't regret it
Sent from my SCH-I605 using xda app-developers app
I'm up and running! Almost got to impatient during the Verizon boot but I just set it aside... didn't take long.
I can't get the WiFi to turn on.... I've seen this before and I thought flipping the Mobile Data off and on would fix the issue but it didn't work. I wiped my internal sdcard because I had too many backups. I will keep playing around with it, like I said I've seen this before I just can't recall what I did to fix it....
Cooter007 said:
I'm up and running! Almost got to impatient during the Verizon boot but I just set it aside... didn't take long.
I can't get the WiFi to turn on.... I've seen this before and I thought flipping the Mobile Data off and on would fix the issue but it didn't work. I wiped my internal sdcard because I had too many backups. I will keep playing around with it, like I said I've seen this before I just can't recall what I did to fix it....
Click to expand...
Click to collapse
Did you Odin the firmware that is linked in the OP?
Sent from my SCH-I605 using xda app-developers app
krowley3 said:
Did you Odin the firmware that is linked in the OP?
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Duh!!!! As many times as I have done this I didn't want to be that person......... NOW I"M THAT PERSON!
I got so excited I skipped that step. What makes me feel so stupid, is I just downloaded the firmware patch with another ROM that I was getting ready to load before the ROM popped up!
Sorry, my BAD
Cooter007 said:
Duh!!!! As many times as I have done this I didn't want to be that person......... NOW I"M THAT PERSON!
I got so excited I skipped that step. What makes me feel so stupid, is I just downloaded the firmware patch with another ROM that I was getting ready to load before the ROM popped up!
Sorry, my BAD
Click to expand...
Click to collapse
No worries. Flash that via Odin on the computer and you should be good to go.
Sent from my SCH-I605 using xda app-developers app
I also cannot get wifi to work, I followed the directions in the op including flashing the firmware via Odin.
the_rhino said:
I also cannot get wifi to work, I followed the directions in the op including flashing the firmware via Odin.
Click to expand...
Click to collapse
Did you flash firmware before or after flashing the rom? Does the switch immediately go back to off or does it try to turn on and eventually go back to off?
Also make sure you verify MD5 hash on both the firmware and rom download.
Sent from my SCH-I605 using xda app-developers app
krowley3 said:
No worries. Flash that via Odin on the computer and you should be good to go.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Ha, now I'm up and running! WiFi, Camera, GPS Lock, blah, blah, blah I've never used NFC so I don't test that.
I like it! I will live with for a few days after rebooting a couple of times. THANKS for the ROM!