[Kernel] KTG-Kernel-2.6.32.9-perf (alpha-0.1) - XPERIA X10 Android Development

Hi,all
Team KTG(- tsuyo.Kou, & Thjap and tkymGr -) presents!
Here is kernel-2.6.32.9-perf for X10!!
Locked bootloader version : KTG-Kernel-X10_va01.zip
UnLocked bootloader version : from beta version
This kernel is alpha stage and tested only SEMC 3.0.1.G.0.75 !!
[ Not working ]
camera
camcorder
[ Bug List ]
sometimes not back from sleep(touch display then shown)
a little unstability
Video plays in monochrome(only tested youtube)
Other small bugs
[ Install Guide ]
(1) Install SEMC 3.0.1.G.0.75
(2) Get root from flashtool (I'm used 0.8.1 win ver)
(3) Install xRecovery 0.3GB from xRecovery and set default
(4) in FlashTool : Advanced -> Reboot -> Recovery -> Reboot default version
(5) in xRecovery install zip
(6) reboot
[ Caution ]
This file replace some libs and firmware.
So if you want to back to .29 kernel, you must restore from your backup.
[Special Thanks ]
jerpelea , zdzihu and FreeXperia Team
spaarc , achotjan - for enabling EGL
Androxyde - for FlashTool
source is here
We are not responsable of any damage that you or you phone will suffer by using our work !!

---

----- Reserved -----

---

cool... are there some significant differences between the .29 and the .32 kernel?

---

I think performance. Good job, KTG Team! I thought your forgotten project never show up (I'm not good in Kernels for now, so didn't start any development in this section, cause You and FXP or DooM are best ). Now let's wait for new version with fixed bugs and here we go! Some new big stuff for X10! This device won't dead .

---

Best of luck on your effort! I wish to see a 3.x kernel as well, some time in the future for our beloved X10!

---

Awesome!!! Great work Japanese Brothers!
I wish see the final version

---

Holy ****, never thought it would happen. Succes developing it, and I hope with help from others it will be stable in no-time!

---

Hi,all
Locked version is released !!
please report bugs!
cheers
tsuyo.kou

---

aha!!!
was waiting for this !!
had been following your source for a long time
this is awesome
----------------EDIT
any chance we could make the wifi compile inline (not as module) ??
th_jap had tried doing it in his thgo kernel if i'm not wrong??

---

awesome
Sent from my X10i using XDA

---

So would the recently released X10 camera code http://developer.sonymobile.com/cws/devworld/downloads/download/camerax10publicsource be of help in getting the camera functional in this new kernel and so then in ICS?

---

awesome!!!!!!!!!!!!!!!!!!! keep it up!!!!
---------- Post added at 06:30 PM ---------- Previous post was at 06:20 PM ----------
can we use usb otg like the other xperia(correct me if im worng)

---

addak said:
awesome!!!!!!!!!!!!!!!!!!! keep it up!!!!
---------- Post added at 06:30 PM ---------- Previous post was at 06:20 PM ----------
can we use usb otg like the other xperia(correct me if im worng)
Click to expand...
Click to collapse
No I don't think so. Our hardware isn't designed for that.
L
Gesendet von meinem GT-I9300 Galaxy SIII

---

9Lukas5 said:
No I don't think so. Our hardware isn't designed for that.
L
Gesendet von meinem GT-I9300 Galaxy SIII
Click to expand...
Click to collapse
we MIGHT be able to use IF we code the proper usb drivers,
BUT we will always need an external power source
have a look at usb-otg project on nexus one and htc desire

---

Hi
>championswimmer
if we can change atheros source as a kernel module code, then can compile inline.
higher kernel has atheros modules in kernel config.
>TAL333
Thanks for info.
we're going to fix camera
>addak
as 9Lukas5 said, I think so,too.
QSD8250 doesn't have host controller.
Cheers
tsuyo.kou

---

ok thnx for info,but what i really want to know is,is it better than stock kernel? and hope u can fix some bugs and the camera soon
and about installation
i already have xrec and root
so can i just flash the kernel through xrec?
does it support overclock?

---

any noticeable improvements in 2.6.32 as compared to.2.6.29?? i thought that our devs have backported all imp stuff from the later kernals!! is that true?
Sent from my X10i using XDA

---

(1) Install SEMC 3.0.1.G.0.75
where i could get this?

---

botski said:
(1) Install SEMC 3.0.1.G.0.75
where i could get this?
Click to expand...
Click to collapse
This is official SE 2.3.3
get an ftf and flash from flashtool or use pcc to restore to original 2.3.3.
EDIT: Any custom rom based on stock 2.3.3 should also work

---

THeLogiC said:
This is official SE 2.3.3
get an ftf and flash from flashtool or use pcc to restore to original 2.3.3.
Click to expand...
Click to collapse
ive tried the kernel, using champs rom, its working.