Below is my quick review of three EVO LTE cases. I posted this before, but I intend to update it and add my review of the Cruzerlite case. I promised someone I would provide pictures so I wanted to get those up sooner rather than later.
I have 3 cases to compare against each other. This will be my quick and dirty review. This is my opinion so no need for argument.
Sprint Blue Silicone. - It's silicone. Same issues as any silicone case. Attracts dust, hair, etc. Case feels like it could come off easily.
eBay TPU Amzer Transparent "White" glossy case. - The color described and pictured in the listing did not match what I received but that isn't important to this review. The case fits well. The front of the case creates a lip that protects the glass when the phone is face down. All of the buttons are covered by TPU. It may seem like a bad thing but it's not when compared to the Diztronic. I can easily press any of the buttons while keeping a firm one-handed grip on the phone. The only openings are access ports, kickstand, speakers, and microphone. The phone feels well protected with the case on. The biggest flaw is that there isn't a raised lip around the back camera.
Diztronic TPU matte black case. - the case looks beautiful. The matte finish on the back and the glossy front looks sharp. Same lip on the front to protect the glass when the phone is face down. They have a nice raised lip around the back camera. All buttons and ports have cutouts in the TPU. The matte finish is less gripy than the glossy finish of the Amzer case.
The cutouts create the biggest issue for me and why I probably won't be using the Diztronic case. That issue can be broken into 2 parts. The first part is with the volume button cutout. The size of that cutout created a thin strip of TPU above the button near the screen. This strip of TPU is rather flimsy and is kind of "just there". I'd compare it to a hangnail.
The second part with the cutouts is the difficulty of pressing the buttons. It is most noticeable when I try to use the volume button with a firm one-handed grip. Because there is that thin flimsy piece of TPU near the volume button, I have to lift my thumb over the TPU and down to push the button. There is nothing below the button to really give your thumb a surface to grab onto. My thumb is no longer in a good position to hold the phone and the majority, if not all, of my grip has to come from my palm and my four fingers. On the Amzer case my thumb is still a strong part of my grip when I press the volume button.
Back to Diztronic, the cutouts for camera button and power button are harder to access. Imagine trying to hold the phone and press the camera button with one hand.
I have 3 cases coming from Cruzerlite to try. After trying the Diztronic, I had to go back and see if the Cruzerlite had similar cutouts. They do. We'll see how those feel.
Pics of the Amzer and Diztronic:
Slideshow
Reserved
thoughts exactly on the Diztronic...if it just had covered the volume buttons I could deal with the other cutouts and likely would use the case more...
hopefully/maybe he comes out with an update on it and changes at least that one part?...
nice.
the white clear one looks like it could be identical to the tpu rocketfish case.
waiting patiently for cruzerlite case review.
has anyone gotten the otterbox commuter case in/reviewed yet?
Very appreciative of the post, but ur username absolutely horrendous.... It has only been true 1 out of every 3 games...
Sent from my PG86100 using XDA
Power button
I also have a issue with the case holding the power button down with the Diztronic case needs a wider lip around the screen!
great thread.
*subs*
Damn I ordered that Amzer white case a few days ago! It looks like a solid gloss white in the pics, kinda pissed off its transparent! Oh well, back to the drawing board I guess lol.
SPreston2001 said:
Damn I ordered that Amzer white case a few days ago! It looks like a solid gloss white in the pics, kinda pissed off its transparent! Oh well, back to the drawing board I guess lol.
Click to expand...
Click to collapse
Yeah, my thoughts exactly. I've contacted the seller. I've been very cordial with him. His communication sucks. I haven't asked for a refund. I just asked him what he can do. It's not a huge deal, but it sucks to be shown one thing and receive another. If I don't hear from the guy in a day or 2, I'll chalk it up as a loss, but I'll have to leave negative feedback. Sucks, but thems the breaks.
iv been using the Cruzerlite case for about a week. i LOVE IT!
one issue with it is that when ever i wanna show my friends how slim my evo is. i go to take the Cruzerlite case off and its so tight on the phone when i pull it off it ends up ripping off the back top cover.
I'm going to have to disagree with the complaints about the Diztronics case. The button cutouts are just right, I don't feel that they interfere with getting to buttons at all. I would hate to lose the tactile feel of the two-stage shutter button by covering it, for one. As for the strip above the volume rocker, it's quite adequate, not thin or flimsy at all. I have no bulge around the kickstand, and all in all I'd rate this case a 10. Just my take on the situation.
SilverZero said:
I'm going to have to disagree with the complaints about the Diztronics case. The button cutouts are just right, I don't feel that they interfere with getting to buttons at all. I would hate to lose the tactile feel of the two-stage shutter button by covering it, for one. As for the strip above the volume rocker, it's quite adequate, not thin or flimsy at all. I have no bulge around the kickstand, and all in all I'd rate this case a 10. Just my take on the situation.
Click to expand...
Click to collapse
As someone on the fence of a couple cases, what are you basing your "10" rating on? I see OP has a selection and is giving his opinion, but all you've added here is, "You're wrong, its perfect". Which is cool, its an opinion too, but OP has a few options to compare it to. If you've got some other cases also I'm sure we'd all love to see your pics and hear your individual opinions on how they weigh against each other, that'd be great!
I have to say I love the Diztronic Matte case. I don't have any other case to compare it to... but it looks and feels amazing. This is my first TPU case and I love how this doesn't pick up any fingerprints/dust, and won't stick to your jeans. At first I found it a little difficult to hit the power button, but I got used to this pretty quick. The cutouts for the volume and camera buttons cause no issues for me. I guess it may depend on how you hold the phone.
I normally don't like using cases with my phones, but I like this one so much and it fits so well that I don't see myself wanting to take it off.
Well, I can't really do a comparison, and I don't mean to take anything away from the OP's review - which, I have to admit, was very well written. I personally just got this case and I'm very happy with it. For the record, I did not say "you're wrong" just that I disagree. It is personal preference. I don't feel that the open buttons are a con, I actually prefer it this way. I also feel that the strip above the volume rocker is plenty strong, and I have no worries about the durability of this case. I had the same case for my OG Evo for nearly 2 years and I still love it, and this one seems even better in terms of design, quality, and value.
Not everyone will have the same opinion, and that's cool. I'm not selling anything but my own thoughts. I might even prefer one of the other cases if I tried them, but I'm happy with what I have.
Hope that clears things up a bit, and I hope you find something that you like.
Sent from my EVO using xda premium
I'm really surprised to hear of anyone having button problems with our case. I've been using our Diztronic case since my pre-order arrived and have had no problems at all. The point of a cutout is so you won't have problems pressing the buttons. If we cover them someone will email me and say they physically cannot press the buttons, and if we cutout them out someone will email me saying they would prefer them covered. Ultimately it comes down to what I get less complaints about and that is by far cutout buttons. I know you can't please everyone all the time but I do believe our Evo LTE case is far and away the best TPU case we've ever made. So far I've received 5 emails from customers who either had problems with a kickstand buldge or a sticky power button which is an extremely low amount of complaints compared to how many we've sold already, so It does appear most customers are very happy with our Evo LTE case. As always, if you guys have problems with any of our products or have ideas of how to make them better please email me. Thanks for your support!
Edit: just wanted to let you guys know the numbers are in and our Matte Back Black HTC Evo LTE case set a single day sales record for us on Sunday! Thank you everyone!
OneStepAhead said:
I'm really surprised to hear of anyone having button problems with our case. I've been using our Diztronic case since my pre-order arrived and have had no problems at all. The point of a cutout is so you won't have problems pressing the buttons. If we cover them someone will email me and say they physically cannot press the buttons, and if we cutout them out someone will email me saying they would prefer them covered. Ultimately it comes down to what I get less complaints about and that is by far cutout buttons. I know you can't please everyone all the time but I do believe our Evo LTE case is far and away the best TPU case we've ever made. So far I've received 5 emails from customers who either had problems with a kickstand buldge or a sticky power button which is an extremely low amount of complaints compared to how many we've sold already, so It does appear most customers are very happy with our Evo LTE case. As always, if you guys have problems with any of our products or have ideas of how to make them better please email me. Thanks for your support!
Edit: just wanted to let you guys know the numbers are in and our Matte Back Black HTC Evo LTE case set a single day sales record for us on Sunday! Thank you everyone!
Click to expand...
Click to collapse
Self praise is no recommendation.
OneStepAhead said:
I'm really surprised to hear of anyone having button problems with our case. I've been using our Diztronic case since my pre-order arrived and have had no problems at all. The point of a cutout is so you won't have problems pressing the buttons. If we cover them someone will email me and say they physically cannot press the buttons, and if we cutout them out someone will email me saying they would prefer them covered. Ultimately it comes down to what I get less complaints about and that is by far cutout buttons. I know you can't please everyone all the time but I do believe our Evo LTE case is far and away the best TPU case we've ever made. So far I've received 5 emails from customers who either had problems with a kickstand buldge or a sticky power button which is an extremely low amount of complaints compared to how many we've sold already, so It does appear most customers are very happy with our Evo LTE case. As always, if you guys have problems with any of our products or have ideas of how to make them better please email me. Thanks for your support!
Edit: just wanted to let you guys know the numbers are in and our Matte Back Black HTC Evo LTE case set a single day sales record for us on Sunday! Thank you everyone!
Click to expand...
Click to collapse
I have 3 of these and love them all, ok maybe not the white. Gets dirty too fast lol. But they fit great and protect as well as look cool. I'm the first to admit the power button takes a little tweak on how you press it. I come from behind instead of the front. Could be cuz I got fat fingers lol. Overall very well built case. Now I just need a belt clip to hold it.
Sent from my EVO using Tapatalk 2
Chaosmaker2k said:
I have 3 of these and love them all, ok maybe not the white. Gets dirty too fast lol. But they fit great and protect as well as look cool. I'm the first to admit the power button takes a little tweak on how you press it. I come from behind instead of the front. Could be cuz I got fat fingers lol. Overall very well built case. Now I just need a belt clip to hold it.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Didnt know the had a white version! Ordering now! lol
***EDIT*** I dont see a white one, where did you find it?
Chaosmaker2k said:
I'm the first to admit the power button takes a little tweak on how you press it. I come from behind instead of the front. Could be cuz I got fat fingers lol. Overall very well built case. Now I just need a belt clip to hold it.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I have pretty skinny fingers and I have to do the same. Not that big of a deal, after a few times you get used to pressing it that way.
Sent from my EVO LTE
SPreston2001 said:
Didnt know the had a white version! Ordering now! lol
***EDIT*** I dont see a white one, where did you find it?
Click to expand...
Click to collapse
Whoops, I was half a sleep when I posted that. I have the cruzierlite cases lol sorry
Sent from my EVO using Tapatalk 2
Related
http://www.amazon.com/EMPIRE-Green-...JJXS/ref=sr_1_2?ie=UTF8&qid=1321222735&sr=8-2
That's the case I got for my T-mobile Radar 4G and I like it. It covers the buttons but I prefer it that way since it makes easier to press them. One thing I am concerned about the case is whether or not it will pick up lint from the pocket.
I would like to know other case options.
Nice case. I almost pick that one up but in a different color. I want to wait for a hard case though.
this is my case with phone,i really like it .looks cool white phone with black case
Where did you get the black case from?
greenman44 said:
Where did you get the black case from?
Click to expand...
Click to collapse
this site
EBAY
I Bought today from a local T mobile store a D3O Gel Skin. It comes in black.
http://www.t-mobile.com/shop/AddOns...c39-21ff110f3aa1&inCart=True&catCode=21&qty=1
One thing that I like is that it makes the phone easier to grab, but I am afraid that is the only thing that I like. The case covers almost all the "whiteness" of the phone, makes it bulkier and overall I do not like it. Another negative is that the on / off button at the top of the phone is is very hard to press with the phone inside the case.
I will be returning it tomorrow. This phone actually looks too nice to be covered.
Sent from my iPad using Tapatalk
Yup the radar is too pretty to be covered up in some bully case. I'm getting an invisible shield to keep it clean and scratch free. Hopefully I don't drop it O.O
Sent from my HTC Radar 4G using XDA Windows Phone 7 App
So far, I got 4 different cases for my radar. I attached images with cases on and off the phone.
From left to right, links are:
http://www.amazon.com/EMPIRE-Green-...=UTF8&qid=1321222735&sr=8-2&tag=5336653508-20
http://www.ebay.com/itm/220892678796?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
http://www.ebay.com/itm/Soft-Plasti...996108?pt=PDA_Accessories&hash=item45ff4d3fcc
http://www.ebay.com/itm/300631479961?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
First one is silicon case that picks up lint and dirt like crazy which is the reason why I got the second one. The second one I like the lease because it covers all the buttons but there are no grooves or moldings for the buttons outside the case so you can't tell where the buttons are by just touching the case + buttons are hard to press. I got the last two at the same time and I am liking them the best. Buttons are easy to press and doesn't cover up the background microphones on the back..
I wish someone would make a decent case (e.g., otterbox) for this phone!
I ordered he clear case, and it looks very good on he phone, thanks for the recommendation.
Sent from my iPad using Tapatalk
Hey Ventanatips Re: Rock Case for Radar
It says thats a gel case, though it looks like hardplastic. Which is it? I hope its the hard plastic as the gel gets hung up in your pocket when taking it in and out.
---------- Post added at 12:42 PM ---------- Previous post was at 12:36 PM ----------
It says this is a gel case though it looks like hard plastic. Which is it? I hope hard plastic as the gel gets hung up getting the phone in and out of your pocket.
I just bought the Incipio Silicrylic, which is basically a silicone insert and a polycarobonate back, and it feels so so sturdy now. Definitely worth having the peace of mind even though it makes it a tad bit bulkier.
Incipio also offers the feather style hard case. It is thin and fits the curves of the phone well. I had one for my old iPhone and it was amazing! It's $25 but it's well worth the money. The only negative is that it only really protects the backside, and partially the sides.
MyIncipio.com
I got one of those TPU S-Line cases for mine off of Ebay.
I find they fit and feel a bit better than the regular TPU cases and they're only a couple of bucks if you don't mind the longer ship times when ordering from sellers in China.
amapeen88 said:
So far, I got 4 different cases for my radar. I attached images with cases on and off the phone.
From left to right, links are:
http://www.amazon.com/EMPIRE-Green-...=UTF8&qid=1321222735&sr=8-2&tag=5336653508-20
http://www.ebay.com/itm/220892678796?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
http://www.ebay.com/itm/Soft-Plasti...996108?pt=PDA_Accessories&hash=item45ff4d3fcc
http://www.ebay.com/itm/300631479961?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
First one is silicon case that picks up lint and dirt like crazy which is the reason why I got the second one. The second one I like the lease because it covers all the buttons but there are no grooves or moldings for the buttons outside the case so you can't tell where the buttons are by just touching the case + buttons are hard to press. I got the last two at the same time and I am liking them the best. Buttons are easy to press and doesn't cover up the background microphones on the back..
Click to expand...
Click to collapse
I recommend the clear case. I bought it and it took a while to come from China, but well worth it.
The only problem that I have found is that the light from the flash shines through the case and gives pictures a bright glow.
I really recommend the rubberize snap on hard case, brought a white one from this seller on ebay, it cover that plastic part in the front of the phone ans the whole side without blocking any of the buttons. Cant post link: but the seller name is moderntechs.
I have been really happy with a white/clear case purchased on Amazon. I have both a black and white case, and think the white looks a ton better.
http://www.amazon.com/Amzer-Silicon..._1_5?s=wireless&ie=UTF8&qid=1335283218&sr=1-5
I really like the consistency - I think its about perfect. Not too ridgid, but not too flexible. IMO, the Radar is a little bit slippery, and I love the feel of this case.
The case covers the camera button, volume rocker, and power button, but fits them perfect. It does not cover the camera or the flash, and there are small holes cut out for the mic and back speaker. Any questions re the case, let me know.
kbagrows said:
I have been really happy with a white/clear case purchased on Amazon. I have both a black and white case, and think the white looks a ton better.
http://www.amazon.com/Amzer-Silicon..._1_5?s=wireless&ie=UTF8&qid=1335283218&sr=1-5
I really like the consistency - I think its about perfect. Not too ridgid, but not too flexible. IMO, the Radar is a little bit slippery, and I love the feel of this case.
The case covers the camera button, volume rocker, and power button, but fits them perfect. It does not cover the camera or the flash, and there are small holes cut out for the mic and back speaker. Any questions re the case, let me know.
Click to expand...
Click to collapse
I have that but don't use it. It isn't tight enough for my liking. It sticks to all kinds of dirt.. AND it makes the Radar more slippery when I take it out of the case!!!!!!!!!!
I just ordered another one, http://www.amazon.com/gp/product/B006KF5WDY/ref=oh_details_o00_s00_i00 , hopefully it's good. It looks good.
wanted to share these pictures I took of the two cases I got off of eBay *TPU BLUE CASE* and *Red Rubberize Backcase* for the HTC Radar.
I really prefer the Hard Rubberize cases they feel more sturdy and stylish
--
After reading hundreds of forum posts, watching many youtube reviews, and spending hours of silent contemplation with Buddhist monks, I still can not decide between the Otterbox Commuter, Seidio Active, and the Incipio Silicrylic. They all seem fairly similar, with a few key differences, and since I know many of you have owned at least one of these, I could use your input.
First and foremost the reason I am buying the case is to improve the function of the power and volume buttons. In fact, I switched back to the standard battery from the extended because none of the cases I could find really addressed those button issues. I'm sure they all do a sufficient job of protection, so my main concerns are fit and button improvement.
The otterbox and the incipio clearly show protruded buttons that would appear to help with that situation. Can anyone comment on the seidio's buttons? Also, the incipio seems like its a bit loose. Having held an iPhone with the case on, it didnt feel snug at all. This seems to be the case ( ) with the Rez as well.
In terms of looks, I like the OB the best, but it also seems the bulkiest and I'm not so sure about the port covers. As for the seidio, I've read about peeling finish on the back cover. I'm not sure anyone's had it long enough to have experienced it, but I AM hoping you can weigh in on the camera. The lens looks restricted by the back cover.
The last factor I'm using to decide between the three is the lip around the screen. It should be big enough to protect the screen from a faceplant, but I'm also worried about it restricting the use of the screen toward the edges.
I appreciate any input you have, and I'm hoping others find this information useful in making a decision.
jcdrummr said:
After reading hundreds of forum posts, watching many youtube reviews, and spending hours of silent contemplation with Buddhist monks, I still can not decide between the Otterbox Commuter, Seidio Active, and the Incipio Silicrylic. They all seem fairly similar, with a few key differences, and since I know many of you have owned at least one of these, I could use your input.
First and foremost the reason I am buying the case is to improve the function of the power and volume buttons. In fact, I switched back to the standard battery from the extended because none of the cases I could find really addressed those button issues. I'm sure they all do a sufficient job of protection, so my main concerns are fit and button improvement.
The otterbox and the incipio clearly show protruded buttons that would appear to help with that situation. Can anyone comment on the seidio's buttons? Also, the incipio seems like its a bit loose. Having held an iPhone with the case on, it didnt feel snug at all. This seems to be the case ( ) with the Rez as well.
In terms of looks, I like the OB the best, but it also seems the bulkiest and I'm not so sure about the port covers. As for the seidio, I've read about peeling finish on the back cover. I'm not sure anyone's had it long enough to have experienced it, but I AM hoping you can weigh in on the camera. The lens looks restricted by the back cover.
The last factor I'm using to decide between the three is the lip around the screen. It should be big enough to protect the screen from a faceplant, but I'm also worried about it restricting the use of the screen toward the edges.
I appreciate any input you have, and I'm hoping others find this information useful in making a decision.
Click to expand...
Click to collapse
My vote is Seido. I've owned the Otterbox, but not Incipio. As far as quality of the holster, nothing compares to the Seido. Just stronger and seems to last forever. The buttons are easier to use on the Seido than the Otterbox. The Otterbox is slightly less bulky, but it's negligible at best. I have 2 Seidos, one red and one blue. I have yet to experience any peeling from the plastic. I've thrown it in bags, stuffed it in pockets. It just seems to hold up nicely. The lip is nice on the Seido. It's about the same as on the Otterbox but it doesn't inhibit use of the screen like the Otterbox can. The Seido is made really well where you can actually push the rubber aside if you need to get really far over. I was actually afraid that this would stretch the rubber, but this thing has been solid and hasn't stretched at all. I can't say the same about my Otterbox.
Both are amazing cases. I think the Seido looks a lot better once you add in the different colors. The blue is gorgeous and the red matches the phone perfectly. Neither the Otter or the Seido do anything to inhibit the camera. But I would still go with the Seido based on build quality of the clip/holster and the quality of the case itself. Just my 2 cents. Buy it, you won't regret it.
EDIT: I also change my case every day, so it's gone through some serious tests for me. Every time I put my Seido back on, it's like the first time I got it. The plastic is just super strong and the rubber won't stretch. Seriously, I'll never buy another brand of case again if I can help it. (And no, I don't work for Seido )
EDIT 2: Here is my review of a few cases including the Seido Active and the Otterbox. This was before I purchased the clip for the Otterbox, but you get the idea.
And here are some pics of the red one.
WasabiWa83 said:
My vote is Seido. I've owned the Otterbox, but not Incipio. As far as quality of the holster, nothing compares to the Seido. Just stronger and seems to last forever. The buttons are easier to use on the Seido than the Otterbox. The Otterbox is slightly less bulky, but it's negligible at best. I have 2 Seidos, one red and one blue. I have yet to experience any peeling from the plastic. I've thrown it in bags, stuffed it in pockets. It just seems to hold up nicely. The lip is nice on the Seido. It's about the same as on the Otterbox but it doesn't inhibit use of the screen like the Otterbox can. The Seido is made really well where you can actually push the rubber aside if you need to get really far over. I was actually afraid that this would stretch the rubber, but this thing has been solid and hasn't stretched at all. I can't say the same about my Otterbox.
Both are amazing cases. I think the Seido looks a lot better once you add in the different colors. The blue is gorgeous and the red matches the phone perfectly. Neither the Otter or the Seido do anything to inhibit the camera. But I would still go with the Seido based on build quality of the clip/holster and the quality of the case itself. Just my 2 cents. Buy it, you won't regret it.
EDIT: I also change my case every day, so it's gone through some serious tests for me. Every time I put my Seido back on, it's like the first time I got it. The plastic is just super strong and the rubber won't stretch. Seriously, I'll never buy another brand of case again if I can help it. (And no, I don't work for Seido )
EDIT 2: Here is my review of a few cases including the Seido Active and the Otterbox. This was before I purchased the clip for the Otterbox, but you get the idea.
And here are some pics of the red one.
Click to expand...
Click to collapse
+ 1.
The buttons are actually easier to use with the case than without it.
No issues with the camera lens
Great feel. Not too bulky and a solid, tight fit. I have all the confidence in the world that the phone would be protected if I dropped it.
KORM via the beast known as the Rezound.
I'm the opposite if the first reply, had the otterbox, upgraded to the incipio. To me the otterbox was too slick and way too big. It made the rezound bigger than my wife's thunderbolt with an incipio. I do like the port covers on otter box, but I also like to use a car dock, and you can't have both!
The incipio has been great over the two months I've had it. I would reccoment it. On an off easily, and it looks nice. The screen protector doesn't have cut outs for the camera or light sensor (which has no impact for me) but is very robust.
There is a little bit of a stretching if the silicon layer for me, but I use a really tight arm band for running and it pulls on it pretty bad. I don't think it would be the case if I didn't abuse it like that.
You should probably just buy both!
a-jive said:
You should probably just buy both!
Click to expand...
Click to collapse
No kidding!
Thanks for the quick responses.
Wasabi I almost just PMd you my questions, what with your previous reviews and all (badass wallpaper, btw), but I thought there might be more people asking the same questions. You mentioned that the power button was still flush. Would you say that its about the same functionality as naked, or better? Like I said...thats basically my #1 concern. Also the camera cutout looks way better in your pics than it does on the Seidio website.
Also Jive, a guy at work said the plastic of his Incipio was really brittle. I told him better that plastic than the phone, but have you noticed any cracking or chipping?
seidio active is the way to go. The incipio case is garbage. It cracked the first time I went to put it on. The otter box is just huge and far too bulky. I'm sure its a good case, I don't have it but my brother in law does. Sometimes the silicon part slips a bit near the top, its like they didn't make a proper fitting mold. I personally think the seidio is the best looking of all of them too. I don't have the seidio case because I use the extended case or I would use it.
Sent from my ADR6425LVW using xda premium
jcdrummr said:
No kidding!
Thanks for the quick responses.
Wasabi I almost just PMd you my questions, what with your previous reviews and all (badass wallpaper, btw), but I thought there might be more people asking the same questions. You mentioned that the power button was still flush. Would you say that its about the same functionality as naked, or better? Like I said...thats basically my #1 concern. Also the camera cutout looks way better in your pics than it does on the Seidio website.
Also Jive, a guy at work said the plastic of his Incipio was really brittle. I told him better that plastic than the phone, but have you noticed any cracking or chipping?
Click to expand...
Click to collapse
Thanks..I had that wallpaper forever The power button is flush, yes, but there's like a cutout for it. I'll post a pic in a second. It's much easier to press than without the case. The volume buttons are muuuuuch easier. So power button naked would be like a 5/10 for ease of use. With the case it's 7.5/10. Volume buttons are like 4/10 naked. With the case they're easily 10/10. And yes, there's no obstruction of the camera with the case. I love this case. It's easily the best one I've purchased for any phone, and I'm kind of a case freak.
EDIT: Here are the pics. You can see what I mean by flush. It doesn't protrude like the volume buttons. But it does have the nice cutout so it's very easy to push. And ignore how dirty the phone is. lol
EDIT 2: You need anymore pics or anything, just let me know. About to leave in a minute, but I'll be back later and can take some different angles if you need me to.
I'm right with Wasabi on this. Had the Seidio since the week it came out. The rating that Wasabi put on the buttons is pretty much spot on. They don't protrude, but make the buttons a lot easier to manipulate than naked. The fit is nice and it looks great on the phone. The lip on the front is perfect for protecting the screen. I have had it get in the way trying to place letters on the very edge while playing words. It will stretch out of the way and springs right back in to place though. I haven't had any peeling or anything on the back. I have noticed the edges of the silicon getting a little glossy. This is to be expected though since I take it in and out of my pocket a thousand times a day! Best case I've had on a phone.
wow, looks like I'm getting the Seidio. Thanks for the help!
Good call on getting the seido, I have the white one and I love it!
Sent from my ADR6425LVW using XDA App
Just remember with any of these cases and the camera, you will lose all of your low light capability. The flash ports aren't setup properly so you will have white half images.
fenixnr said:
Just remember with any of these cases and the camera, you will lose all of your low light capability. The flash ports aren't setup properly so you will have white half images.
Click to expand...
Click to collapse
Umm, what? Do you own the Seido or Otterbox Commuter case? I've never had any issue with the flash or photos in general ever. What are you talking about?
Never had any picture issues. Flash works fine.
Another +1
No issues at all with the camera.
KORM via the beast known as the Rezound.
Just throwing my weight behind the Seidio. I have the gray on gray Incipio and it is definitely looser. (Anyone want to buy it?)
Actually, my favorite is the Seidio Surface (because it will slide into a side leather pouch), but if you're looking for more protection, go Seidio Active. It goes in and out of the holster quite nicely as well.
can somebody post some more pics of Seido Active?
Damasterjj said:
can somebody post some more pics of Seido Active?
Click to expand...
Click to collapse
Are you looking for more than these? If so, let me know specifically what you're looking for and I can post them when I get mine in the mail tomorrow.
jcdrummr said:
Are you looking for more than these? If so, let me know specifically what you're looking for and I can post them when I get mine in the mail tomorrow.
Click to expand...
Click to collapse
thanks, I just want to see how big it is. compared to the otterbox defender.
Damasterjj said:
thanks, I just want to see how big it is. compared to the otterbox defender.
Click to expand...
Click to collapse
Though not the greatest comparison, I found this site helpful as well. (edit: just realized thats a commuter in the comparison, so heres a commuter vs defender comparison)
p.s. make sure you thank Wasabi for those pics!
Damasterjj said:
thanks, I just want to see how big it is. compared to the otterbox defender.
Click to expand...
Click to collapse
If you know how big the Otterbox Commuter is, I'll post a pic of the Commuter next to the Active for you. They're closer in size than the Defender and Active are.
im a fan of the original rocketfish tpu case for the evo, although i had to cut out for the button holes, etc.. it still served me well cheaply.
the ones for the lte look equally impressive, this time the button holes look cut out.
and come in pink/transparent smoke
anyone bought and got pics and fitting, remarks?
thanks
Case fits well and all holes are cut perfectly. Camera button works well. Power button not quite as good.
renegadetx said:
Case fits well and all holes are cut perfectly. Camera button works well. Power button not quite as good.
Click to expand...
Click to collapse
Case does fit well, but I would say the opposite about the buttons (which are all covered, btw), I find the power button to be perfect, but half pressing the camera is near impossible. I can't feel where that half step is, you know? And I find myself searching for the volume rocker a lot. Having said that, this thing is a joy to hold. I originally picked mine up at bb intending to return it when my Diztronic ones came in, but it really won me over. The cutouts are perfect, it's snug in all the right places, and it feels great in the hand. The Diztronic ones are pretty awesome also, but I didn't like how the cutouts felt. I decided to keep the rocketfish one on my evo and use the other ones as backups. + 1, would buy again.
interesting. i can see in the pic that the power button looks to be halfway covered.
wth?
Actually the power button is completely covered. The cut out part is the headphone jack and second mic.
I - love - this - case. I have never had any of my phones protected with any case protectors because they all sucked donkey balls. I usually just used skin protectors, because cases add bulk to an already bulky or sleek phone. The EVO LTE is a sleek slim phone that can easily slip in and out of pockets fast. The TPU case that Sprint sent everyone was slim and provided protection, but it was NOT easy to get into and out of pockets.
So, stumbled into Best Buy to get a Zagg HD screen protector and asked where the EVO LTE accessories were at. I see this and tried it on for size and was really pleased. I don't regret the decision and have actually saved my ass when the phone was dropped the same day. I love it because of 3 important factors:
1) Does not add any noticeable girth. It doesn't add any huge lip to the front, just enough to keep the screen off the surface when the screen is placed downward. The back adds no thickness because it is flushed to camera lens "bump".
2) Slick case makes it easy to get it into my pocket, and very easy to get it out fast. It doesn't have that "sticky" feeling. It might be a bad or good thing. If I have it in my hands, I want it sticky. Otherwise, I think it was a good trade-off.
3) Buttons are covered. I know some people don't like the buttons covered, but when I usually drop my phones, the buttons are the ones to get scuffed first. I wanted my phone protected from those scuff marks and any accidental water that might get near it. I like it protected as much as possible. The buttons are still easy to press, but I kinda get confused where to press, unless I feel for the grooves really well or look at where I'm pressing. I think RocketFish could improve here. They need to make the covered buttons provide more tactile feedback or maybe an option to have the buttons color coded, or even add some stickers in the package so we the user could add different colored stickers if we wanted them. In fact, I'm patenting the idea of including different color stickers (of varying sizes for different buttons or locations) to phone protectors so people can decide IF, WHERE, and what COLORS they want on their protector. Heck, maybe even some logo stickers if you want.
That's my 2 cent review.
I bought the case as well. Adds no bulk and protects it well. Highly recommend
Sent from my EVO using XDA
Bought this case and it fits perfectly. Like others have said it adds little to no bulk to the device. The buttons are covered but I have not problem pressing them. I highly recommend this case for those who don't like those bulky cases such as the otterbox.
Wow so that's what a $25 TPU case looks like.
shook187 said:
Wow so that's what a $25 TPU case looks like.
Click to expand...
Click to collapse
It's a $25 Soft Gel case that you can get today at your local Best Buy without having to wait. You get what you paid for. Yeah, I would have preferred it cheaper, but I got instant gratification.
Good investment for this case. I dropped it on the pavement getting out of my car on 6/9, made very little noise when hitting the ground. I picked it up and after close inspection I found only a very small nick on the case in the corner. Much better than scratching the aluminum.
Very happy with it, but like stated earlier, I would like to feel the half press of the shutter a little more.
JDPito
HTC EVO 4G LTE
There seems to be some confusion between the terms "TPU case" and "soft gel case". A gel case is squishy and sticky in your pocket, and will pull your pocket inside out when you try to get it. A TPU case is harder, stiff but flexible plastic that is more neutral feeling in terms of grip. They're not interchangeable terms. Diztronics makes an excellent TPU case for under $10.
SilverZero said:
There seems to be some confusion between the terms "TPU case" and "soft gel case". A gel case is squishy and sticky in your pocket, and will pull your pocket inside out when you try to get it. A TPU case is harder, stiff but flexible plastic that is more neutral feeling in terms of grip. They're not interchangeable terms. Diztronics makes an excellent TPU case for under $10.
Click to expand...
Click to collapse
+1
TPU is definitely not gel.. If you're happy with a 25$ tpu because you didn't wanna wait 3ish days, thats great! I personally feel you get better quality, design and prices when you order it.
Sent from my EVO using xda premium
Antebios said:
It's a $25 Soft Gel case that you can get today at your local Best Buy without having to wait. You get what you paid for. Yeah, I would have preferred it cheaper, but I got instant gratification.
Click to expand...
Click to collapse
Next time you should just buy four of these for the same price, which look to be the exact same case: http://www.ebay.com/itm/GLASSY-BLACK-TPU-SOFT-COVER-CASE-HTC-EVO-LTE-ONE-SPRINT-/221044232781?pt=PDA_Accessories&hash=item337743524d#ht_3047wt_1165
I may even pick one up soon.
Haven't seen anyone show pics of the Incipio Feather for our Evo LTE so thought I'd post a quick review. I have had the Diztronic case on my Evo since the first day I bought it. It is a great case and protects fairly well but I found myself taking the phone out and carrying it naked due to how good it looks without a case. So once I saw the feather was out for the Evo I had to get it.
The Incipio Feather is a little more expensive than the Diztronic, $20 vs $10 with a coupon but worth it in my opinion. It is a hard shell that snaps on but is just as thin if not thinner than the Diztronic. I figured the hard shell might also help in avoiding the phone bend that some have had. The Incipio has a very smooth matte finish which complements the Evo very well.
The Feather covers the entire back and the sides of the phone. There are cutouts for the volume buttons, camera button and charging port. One great advantage of the Incipio is that the power button is not covered so it is much easier to press than with the Diztronic. I've attached pictures that show all angles of the case. The bottom lip of the case extends past the bottom part of the phone and the top part of the cover extends to the same level as the phone. Lastly the sides do not extend past the screen but rather at the same level. That is if you place the phone screen down on a flat surface it doesn't elevate the screen. This is a downside but the phone looks so good I have no desire to take it off. Please let me know if anyone has any questions.. Thanks
Which ROM are you running? Is it bug free? Thanks for the review by the way.
touch_rules said:
Which ROM are you running? Is it bug free? Thanks for the review by the way.
Click to expand...
Click to collapse
I meant questions about the case. Lol. No prob though, I'm running cleanromDe. Quite honestly its the best ROM for me. I love nova and being able to customize the launcher so I don't need sense. I have lots of free memory and no lag. I would def recommend trying it out if you haven't
Sent from my EVO using xda premium
Looks pretty nice. I was kinda hoping it was raised above the screen a bit.
Does the strip above the volume buttons feel flimsy at all? That was my biggest complaint with the Cruzerlite Androidify.
My wife is getting on me about having too many cases so the next one I get has to be my last and has to be the best lol.
Sent from my EVO using xda app-developers app
Socrguru said:
Looks pretty nice. I was kinda hoping it was raised above the screen a bit.
Does the strip above the volume buttons feel flimsy at all? That was my biggest complaint with the Cruzerlite Androidify.
My wife is getting on me about having too many cases so the next one I get has to be my last and has to be the best lol.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
The strip by the volume buttons feels very sturdy and doesn't bend with moderate pressure. I don't want to press too hard and have it break but it is definitely not flimsy.
ervman1 said:
The strip by the volume buttons feels very sturdy and doesn't bend with moderate pressure. I don't want to press too hard and have it break but it is definitely not flimsy.
Click to expand...
Click to collapse
Awesome. That might sell me on this one...
Sent from my EVO using xda app-developers app
Both of these are very similar to the Spigen hard case I purchased and had at the ready before my LTEvo arrived in the mail.
(Not allowed to post links yet, as I'm new here, but it is Spigen's snap case for the Evo 4G LTE)
It is basically the smoothest case I've seen for any phone, and looks like the photo when mounted in real life. Unfortunately, the corner strip where the volume rocker is was a bit too fragile. My case broke at that spot less than 2 days of owning it, and I've since read reviews complaining about the same thing.
It's been mentioned that the Incipio feels pretty sturdy in that area, but I'm still wary of that, especially if these cases are made of polycarbonate like the one I purchased.
-Tom
I was rockin the sgp version as well. Loved it. But.
It's to fragile, it cracked when i was trying to take it off. Also, it isn't very grippy, and i always feel like it's going to slip out of your hand. Scratches pretty easily to. It's all rubbed where it rests on a table. From vibrating when it rings.
Ordered the incipio feather, and ngp. Will compare them with the spigen when they arrive tomorrow.
Where did you order the feather from? I can't find it on their website or Amazon. I jumped the gun on one last week and misread the item so I ended up with one for the OG Evo.
I just ordered my G3, and I ordered the BodyGlove Rise Carbon Fiber case. I'm one of the few who always have liked BodyGlove cases. I was kinda amped to see this one, never seen it before. Anyone have this?
big70tom said:
I just ordered my G3, and I ordered the BodyGlove Rise Carbon Fiber case. I'm one of the few who always have liked BodyGlove cases. I was kinda amped to see this one, never seen it before. Anyone have this?
Click to expand...
Click to collapse
I actually just bought this case today from the T-Mobile store and I have to say I love it! The way the case makes the phone feel is really nice and it looks top notch. Very pleased with it..
18.4009 said:
I actually just bought this case today from the T-Mobile store and I have to say I love it! The way the case makes the phone feel is really nice and it looks top notch. Very pleased with it..
Click to expand...
Click to collapse
pics please?
Only thing I'm bummed about is the button covers on back
big70tom said:
Only thing I'm bummed about is the button covers on back
Click to expand...
Click to collapse
I was actually going to post the same thing..The case is awesome but I am having a little issue with the volume and power button cover. They work really well and do not miss pressing the actual button when you press it but... All three buttons are flush and no distinction so when you are blindly feeling around to adjust volume or power it is hard to tell if your on it.
Easy fix would be a dimple on each button so you can find them like braille lol.
Here is a pic i threw on my G drive: Body Glove
Edit:
So I ended up modifying the case... Much happier with the buttons now. Modified Case
And here is a blury pic taken with a friends phone... Blurry pic with phone in case
Pictures dont do this case any justice. You have to see it in person in order to see how cool this case looks. I am also having the same issues as other people due to the button covers but it is something i can get over. I love this case and you made a great purchase.
Dude. I'm gonna cut them too
I'm hoping it's easy to cut along the rubber creases. Did you have problems?
Just got this case. Love it so far. Barely adds any weight to the phone and not much thickness. But it still feels well protected. I actually really like the button cover. The TPU they use feels solid and I really like how the sides are tight without any give. I definitely recommend this case. I paid $16 and I think it's a better overall case than any of the Spigens.