i wanted to relock my bootloader to flash europian RUU to downgrade my hboot from 1.49.0018 to 1.49.0007
first i changed my CID from HTC__J15 to HTC__001 via this command :
fastboot oem writecid HTC__001
then i ran this command :
fastboot oem lock
but the bootloader still shows **unlocked**
help plz
this is what i done :
c:\Android>fastboot oem writecid HTC__001
... INFOvreg_set: request is duplicated id 14
INFO shooter_u_init_sd, SD card power on ok
INFOsdcc_init_memory_device done
INFO[FAT_ERROR] fat_open_file: can not find SMART_IO.CRD
INFO[JAVACARD_ERR] SMART_IO.CRD cann't find
INFOStart Verify: 3
INFOStart Verify: 3
INFOerase sector 130560 ~ 131071 (512)
INFOTZ_HTC_SVC_DISABLE ret = 66977136 (0x3FDFD70)
FAILED (status read failed (Too many links))
c:\Android>fastboot oem lock
... INFOLock successfully...
OKAY
c:\Android>fastboot reboot-bootloader
rebooting into bootloader... OKAY
Flashing PG86IMG.ZIP
i tried a second way
i extracted the ROM.ZIP from temp folder when RUU....exe was runnig , renamed it to PG86IMG.ZIP , copied it into root of my SD card , when i reboot in bootloader it finds the file but after showing a vertical progress bar at the top right of the screen nothing happens
...
what should i do friends?
Sajijun said:
i tried a second way
i extracted the ROM.ZIP from temp folder when RUU....exe was runnig , renamed it to PG86IMG.ZIP , copied it into root of my SD card , when i reboot in bootloader it finds the file but after showing a vertical progress bar at the top right of the screen nothing happens
...
what should i do friends?
Click to expand...
Click to collapse
did u unlocked revolutionary? if yea thn run revolutionary again, possibly it will give u option to relock (im not sure cus i only unlock, never relock) or u can run ur stock RUU
if u use htc dev thn thn it shoule relock oem lock.
[Resolved]
sajibcy said:
did u unlocked revolutionary? if yea thn run revolutionary again, possibly it will give u option to relock (im not sure cus i only unlock, never relock) or u can run ur stock RUU
if u use htc dev thn thn it shoule relock oem lock.
Click to expand...
Click to collapse
no revolutionary does not support hboot 1.49.0018 (only 1.49.0007 & .0008 )
it is unlocked via htcdev
but finally i resolved the problem by entering the command fastboot oem lock several times (cause i was angry ) and suddenly the bootloader booted again showing *** RELOCKED ***
NOW I HAVE HBOOT 1.49.0007 and FREEDOM
--------------------------------------
thx anyway
Related
Hi!
I have found similar problems in the forums, but none of the post seem to help my problem here.
My phone can't startup, it just continue to reboot after 15-20 seconds (showing the white screen with the HTC logo)
Hboot info:
*** UNLOCKED *** <- (used the HTCdev.com method)
Shooter_U PVT SHIP S-ON RL
HBOOT-1.49.0018
eMMc-boot
(date and time)
I can enter Hboot, have managed to get revolutionary CWM v4.0.1.4 on it. Tried a few different ROM's trough the Rev. tool - they seem to install fine, but I still can't start up the phone. Also tried to change my hboot by dl a (PG86IMG.zip) file, seems like it's installing/unzipping when I turn on my device (blue bar at the right hand side of the screen fills up to the top) then nothing happens. The version is the same and so on.
I know I have USB debugging checked and fastboot checked, but I cant turn it off as long as I can't startup my phone? - if this is what causing the problem? Any ideas?
EDIT: I also tried the factoryreset/wipedata/wipe cache from the revo-tool.
Thanks to steveruthless this case is now SOLVED - Thanks again!
how did you fix it?care to share how? thanks
Same problem. How did you solve??
Sent from my HTC EVO 3D GSM using XDA App
Same problem. If someone got an answer, I would be pleased to know.
If u have hboot 1.49 it would be best to use revaluationarys
Sent from my PG86100 using XDA App
i have 149.00.18 and revaluationarys says not sppourtedwt can i do now
I'm not 100% sure since i'm S-On HTC Unlocked CDMA version, but with S-On/ Unlocked, you have to enter recovery via fastboot command prompt (ie: type: fastboot boot YourRecoveryFilename.img ). The filename has to exactly match the filename you flashed to the phone AND the filename that resides in your fastboot folder (you have to leave a copy there, idk why). Once in recovery you can format system, wipe data, and flash rom's & kernels. If you don't enter recovery this way the kernel won't load and you will boot loop.
There are other options, such as JoeyKrim's Flashimage to flash the kernel first, then enter recovery by any method to flash the rest, or you can extract/copy the "boot.img" from the rom's zip, put it in fastboot folder and (type: fastboot flash boot boot.img ) to flash the kernel separately via fastboot command. Doesn't the first option to enter recovery via fastboot just sound more straight forward?
Note: I have some examples in my Guide/flashing notes thread (in my signature) that may help you understand better, but keep in mind its for CDMA version so none of the files I've linked will work with GSM, but the 3rd or 4th post for flashing roms/kernels should help.
Lonely khan said:
i have 149.00.18 and revaluationarys says not sppourtedwt can i do now
Click to expand...
Click to collapse
If Dats the case it seems like u would be better off with hboot 1.5
Sent from my PG86100 using XDA App
Sorry for this taking so long guys..
I fixed my issue by simply using a cmd prompt and boot the img from the zip/rom you have downloaded. I'll try to my make a step by step here:
1. Boot into fastboot and plug in your usb
2. Copy boot.img from the zip/the rom you want installed) and paste it to your Android SDK tools folder. Prob: C:\Android SDK\tools
4. Open a command prompt in C:\Android SDK\tools
5. Write in fastboot boot boot.img the CMD prompt
Voila! Your phone should now be working again.
Whenever you try to flash ROMs always follow these steps , if you are unlocked via HTC method.
Boot your phone in bootloader > Select fastboot > connect to PC >phone should say fastboot-USB > open cmd > navigate to fastboot folder > put your recovery in that folder > pull the boot.img from the ROM you are trying to flash and put it in fastboot folder > then type "fastboot flash boot boot.img" > then type "fastboot boot recovery.img (your recovery name might be different so use that name instead) > Your recovery will boot > Wipe everything first > then flash the ROM.....
htc evo 3d gsm rebooting problem
Hi!
I have found similar problems in the forums, but none of the post seem to help my problem here.
My phone can't startup, it just continue to reboot after 15-20 seconds (showing the white screen with the HTC logo)
Hboot info:
*** UNLOCKED *** <- (used the HTCdev.com method)
Shooter_U PVT SHIP S-ON RL
HBOOT-1.49.0018
eMMc-boot
(date and time)
I have similer problem and i dont now what do i do with my phone
its at the brogramer guy but it take long time to fix me phone problem
ithink to weeks
seriasly I need to help
excusme for my writing I am still studing english
and thanks to help if u help or traing to help me
Amphel said:
Sorry for this taking so long guys..
I fixed my issue by simply using a cmd prompt and boot the img from the zip/rom you have downloaded. I'll try to my make a step by step here:
1. Boot into fastboot and plug in your usb
2. Copy boot.img from the zip/the rom you want installed) and paste it to your Android SDK tools folder. Prob: C:\Android SDK\tools
4. Open a command prompt in C:\Android SDK\tools
5. Write in fastboot boot boot.img the CMD prompt
Voila! Your phone should now be working again.
Click to expand...
Click to collapse
the command is fastboot FLASH boot boot.img
you can not forget the flash part... it is an integral part of the system to modify it....
---------- Post added at 03:35 AM ---------- Previous post was at 03:31 AM ----------
ko0o0ky said:
Hi!
I have found similar problems in the forums, but none of the post seem to help my problem here.
My phone can't startup, it just continue to reboot after 15-20 seconds (showing the white screen with the HTC logo)
Hboot info:
*** UNLOCKED *** <- (used the HTCdev.com method)
Shooter_U PVT SHIP S-ON RL
HBOOT-1.49.0018
eMMc-boot
(date and time)
I have similer problem and i dont now what do i do with my phone
its at the brogramer guy but it take long time to fix me phone problem
ithink to weeks
seriasly I need to help
excusme for my writing I am still studing english
and thanks to help if u help or traing to help me
Click to expand...
Click to collapse
for you .... you have a boot/img file problem... the backup... if you did one.... pull the boo9ot.iumg file from there and rewrite it to the boot partition and it should boot up
Since you have 1.4 just Look for a guide for soff then flash your rom
Sent from my PG86100 using XDA Premium App
i have the same problem...endless boot
Hboot info:
*** UNLOCKED *** <- (used the HTCdev.com method)
Shooter_U PVT SHIP S-ON RL
HBOOT-1.49.0018
eMMc-boot
(date and time)
- I can`t run adb shell because the phone does`n start
- I can`t flash old radio img via flashboot
D:\GSM 2011\htc\evo 3d gsm\ADB_Flash_Tool>fastboot flash radio radio.img
sending 'radio' (22145 KB)... OKAY
writing 'radio'... INFOsignature checking...
FAILED (remote: signature verify fail)
- I can`t write rru image file maybe becose i have new image file (1.22.720.1) and can`t downgrade - error 140 or another error
- I can write any recovery cwm file, but the phone doesn enter in recovery
D:\GSM 2011\htc\evo 3d gsm\ADB_Flash_Tool>fastboot flash recovery cwm-5.0.2.0-sh
ooter.img
sending 'recovery' (4726 KB)... OKAY
writing 'recovery'... OKAY
D:\GSM 2011\htc\evo 3d gsm\ADB_Flash_Tool>
- I can write boot_signed.img, from PG68IMG.ZIP i flash via sdcard, but doesn help, the phone is in the same condition
D:\GSM 2011\htc\evo 3d gsm\ADB_Flash_Tool>fastboot flash boot boot_signed.img
sending 'boot' (3604 KB)... OKAY
writing 'boot'... OKAY
- I can write any PG86IMG.ZIP full or only radio file via sdcard, but doesn help, the phone is the same
gabrielgsm said:
i have the same problem...endless boot
Hboot info:
*** UNLOCKED *** <- (used the HTCdev.com method)
Shooter_U PVT SHIP S-ON RL
HBOOT-1.49.0018
eMMc-boot
(date and time)
- I can write any recovery cwm file, but the phone doesn enter in recovery
D:\GSM 2011\htc\evo 3d gsm\ADB_Flash_Tool>fastboot flash recovery cwm-5.0.2.0-sh
ooter.img
sending 'recovery' (4726 KB)... OKAY
writing 'recovery'... OKAY
Click to expand...
Click to collapse
I'm on Sprint Cdma, but it looks like u might be using the CDMA Recovery (shooter) vs Gsm Recovery (shooteru).
Here are some notes to review:
http://forum.xda-developers.com/showthread.php?p=22732146
[Tutorial] [UNLOCK/ROOT] EVO 3D GSM Hboot 1.49.0011> + S-On [HTC Unlock method]
Here are links to Gsm Shooteru recoveries (give one of these a try):
http://forum.xda-developers.com/showthread.php?p=23099222
[Tutorial] [UNLOCK/ROOT] EVO 3D GSM Hboot 1.49.0011> + S-On [HTC Unlock method]
Sent from my PG86100 using Tapatalk
I installed Leodroids rom with s-on, but saw the kernel was not installed. So I saw that I had to have s-off to install a kernel, so I decided to do the revolutionary method but I needed 1.49.0007 for that and I have 1.49.0018.
I followed this link;
http://forum.xda-developers.com/showthread.php?t=1316578
But when I write
"fastboot oem lock"
Click to expand...
Click to collapse
It says
C:\Android>fastboot oem lock
... INFOLock successfully...
OKAY [ 0.021s]
finished. total time: 0.021s
Click to expand...
Click to collapse
and when I reboot the bootloader or boot back into android I still have an unlocked bootloader and can't relock.
I tried running a nandroid backup I did with CWM when I was running stock rom and tried relocking with that, didn't work with this too.
What am I supposed to do to relock my phone and do the rev. method?
UPDATE, Apparently the tutorial tells me to do
"fastboot oem writecid HTC__001"
Click to expand...
Click to collapse
This ended up with a "fatal error" but still changed to HTC__001.
Now when I try to revert back to my original cid (I got it before writing cid via readcid) I do
fastboot oem writecid HTC__M27
Click to expand...
Click to collapse
and then do readcid, it reads HTC__M27, but when I reboot the bootloader it is still HTC__001.
So apparently the HBOOT can't save any settings.
This is my main problem.
UPDATE#2...
PG86IMG.ZIP was corrupted.. I got a newer one and it was good this time.
The phone read it, said "Parsing.." and kicked me out back to the normal menu.
Any tips?
UPDATE#3 and probably last..
I found out about the tool called Flash Image GUI(.99cents at android market) which will install kernels on S-ON EVO 3D devices.
I was trying to install the leedroid kernel in the first place so after hours of trying to solve my HBOOT problem(and I still couldn't, it is stuck on unlocked and HTC__001, doesn't affect me though) I still couldn't, found about this, installed the kernel and now I am happy with my device.
But still, if you guys have any idea why my HBOOT is read-only now, hit me up so I can solve my issue.
unlock bootloader
your trying to take short cuts first you need to unlock via htc dev now when that is done you need to flash a custom recovery via fastboot using fastboot commands like fastboot flash recovery cwm-4.0.1.4-shooteru.img you can find this in dev section and once that is done dowload lee droid rom and before you flash the rom you will need to wipe ceche wipe delvik ceche wipe battery stats and now press the back button until you see your download folder scroll down to it press power and the zip file you downloaded should be there now scroll down to it press power to flash your new rom and when thats done dont go through the set up go boot back in to boatloader and conect usb press power to get in to fastboot use it should be a red box that says it now on your pc or laptop open command prompt now typ what ever commands you use to get your adb commands and fastboot commands and once thats done typ fastboot getvar cid it will display your cid number now that you see your cid number you can change it to HTC__001 and the way you do this easy typ fastboot oem writecid HTC__001 press enter now it will write your new cid number next you will typ fastboot reboot-bootloader press enter once it rebooted into bootloader you will want to go back into fastboot now tryp fastboot getvar cid your new cid number should be HTC__001 now thats is done go here [Tool][Vodafone+Unbranded!]One & Only easy + working downgrade for revolutionary after this you will have hboot 1.49.0007 once this is done now your ready to s off head over to alpharevolutionary.io
jslim38 said:
your trying to take short cuts first you need to unlock via htc dev now when that is done you need to flash a custom recovery via fastboot using fastboot commands like fastboot flash recovery cwm-4.0.1.4-shooteru.img you can find this in dev section and once that is done dowload lee droid rom and before you flash the rom you will need to wipe ceche wipe delvik ceche wipe battery stats and now press the back button until you see your download folder scroll down to it press power and the zip file you downloaded should be there now scroll down to it press power to flash your new rom and when thats done dont go through the set up go boot back in to boatloader and conect usb press power to get in to fastboot use it should be a red box that says it now on your pc or laptop open command prompt now typ what ever commands you use to get your adb commands and fastboot commands and once thats done typ fastboot getvar cid it will display your cid number now that you see your cid number you can change it to HTC__001 and the way you do this easy typ fastboot oem writecid HTC__001 press enter now it will write your new cid number next you will typ fastboot reboot-bootloader press enter once it rebooted into bootloader you will want to go back into fastboot now tryp fastboot getvar cid your new cid number should be HTC__001 now thats is done go here [Tool][Vodafone+Unbranded!]One & Only easy + working downgrade for revolutionary after this you will have hboot 1.49.0007 once this is done now your ready to s off head over to alpharevolutionary.io
Click to expand...
Click to collapse
+1, worked.. trying for 10+ hours, thanks a lot
G u i flash
and if you follow these steps you can bypass the gui flash tool dont get me wrong it works but it also will cause problems with dual roms that means it has two kernals and it doesnt allow the user the abilty to choose the correct kernal to flash i know becuase i went through it
I did all that, but...
As I said, I did all that, but when I got to the part when I use Revolutionary tool, I got my beta key and type it in, then it reboots my phone to bootloader and so 4 times and then it says to me that it filed and that I can make lemonade!!
I do not wan't lemonade, I wan't S-OFF...
Where do I get wrong?
What to do to avoid this error?
btw. I can't RELOCK my device. I was able to HTCdev unlock, I have unlock_code.bin, I have flashed recovery cwm-4.0.1.4-shooteru.img, and then later even 4ext...
But I still get this:
C:\Documents and Settings\Ante1\Desktop\HTC EVO 3D\htcsupertoolv3\root>fastboot
oem lock
< waiting for device >
... INFOLock successfully...
OKAY [ 0.031s]
finished. total time: 0.031s
C:\Documents and Settings\Ante1\Desktop\HTC EVO 3D\htcsupertoolv3\root>fastboot
oem writecid HTC__001
... INFO shooter_u_init_sd, SD card power on ok
INFOsdcc_init_memory_device done
INFO[FAT_ERROR] fat_open_file: can not find SMART_IO.CRD
INFO[JAVACARD_ERR] SMART_IO.CRD cann't find
INFOStart Verify: 3
INFOerase sector 65504 ~ 65535 (32)
OKAY [ 1.234s]
finished. total time: 1.234s
C:\Documents and Settings\Ante1\Desktop\HTC EVO 3D\htcsupertoolv3\root>fastboot
getvar cid
cid: HTC__001
finished. total time: 0.000s
So, can't relock... I guess that revolutionary tool would work if I can relock?
What should I do?
Flash RUU again, and start the process all over again??
---------- Post added at 02:06 PM ---------- Previous post was at 01:49 PM ----------
Here's what I got when using revolutionary tool:
Brought to you by AlphaRev & unrEVOked.
Waiting for device...
Found your device: HTC EVO 3D X515m (shooteru-1.49.0007, Android: 2.3.4, ROM ver
sion: 1.20.401.2)
This is a beta release and requires a beta release key.
Please visit: http://revolutionary.io for more information.
Enter beta key [ serial: SH21GV200560 ]: 94K60drHazQ8arTG
Beta key accepted - thank you for participating!
Zerging Root... this might take a minute or so.. Root acquired!
Sending in Caroline...
Cleaning up...
Rebooting to fastboot...
When life gives you lemons, don't make lemonade. Make life take the lemons back!
Waiting for fastboot...
Rebooting to fastboot (again)...
Rebooting to fastboot (yet again)...
Rebooting to fastboot (Once moar...)
FAILED - Go have some lemonade!
Press (almost) any key to exit.
I solved it...
Got S-off..
But I had to apply RUU from gingerbread and then follow all instructions (with some shortcuts) but I ended up with S-off and with revolutionary cem and I cannot change it to 4ext and I had purchased paid version...
Whatever, I'm pretty new in HTC developing world and still learning terms and gathering experience...
Sent from my HTC EVO 3D X515m using xda premium
Sent from my HTC EVO 3D X515m using xda premium
locked
pico pvt ship s-on rl
hboot-1.00.0000
radio-1.10.81.17
HTC Explorer A310e; Android Version 2.3.5;
HTC Sense Version: 3.5;
Software Number 1.13.720.4.
Country India
CID-htc_38
I got this phone with a camera problem.it took 40sec to open camera.so i decided to update.
The first thing i cant do is to get the phone into recovery to wipe.so i decided to flash cutom recovery.
I unlocked the bootloader successfully.then i flashed the A310E_Recovery file.both the process went good.but still i cant get into the recovery.
i also tried HTC Pico_Recovery,Boot with ext 2 3 4 support recovery still the same.
i tried adb shell command
C:\android-sdk-windows\platform-tools\adb shell
i get error
error: device not found
fastboot -w
erasing 'userdata'...
FAILED (remote: not allowed)
finished. total time: 0.016s
fastboot erase system
failed
fastboot erase cache
successful
finaly i decided to update through RUU 1.31.720.3
now i have
pico pvt ship s-on rl
hboot-1.03.0000
radio-1.11.02.17
but still cant get into recovery
i geuss its because of s-on or internal memory damage
correct me
also thing ti notice when i switch from bootloader to fastboot i get error as mentioned below
no help so far.i have just 1 more day to make it ready or else need to return phone.
raffazila said:
locked
pico pvt ship s-on rl
hboot-1.00.0000
radio-1.10.81.17
HTC Explorer A310e; Android Version 2.3.5;
HTC Sense Version: 3.5;
Software Number 1.13.720.4.
Country India
CID-htc_38
I got this phone with a camera problem.it took 40sec to open camera.so i decided to update.
The first thing i cant do is to get the phone into recovery to wipe.so i decided to flash cutom recovery.
I unlocked the bootloader successfully.then i flashed the A310E_Recovery file.both the process went good.but still i cant get into the recovery.
i also tried HTC Pico_Recovery,Boot with ext 2 3 4 support recovery still the same.
i tried adb shell command
C:\android-sdk-windows\platform-tools\adb shell
i get error
error: device not found
fastboot -w
erasing 'userdata'...
FAILED (remote: not allowed)
finished. total time: 0.016s
fastboot erase system
failed
fastboot erase cache
successful
finaly i decided to update through RUU 1.31.720.3
now i have
pico pvt ship s-on rl
hboot-1.03.0000
radio-1.11.02.17
but still cant get into recovery
i geuss its because of s-on or internal memory damage
correct me
also thing ti notice when i switch from bootloader to fastboot i get error as mentioned below
Click to expand...
Click to collapse
hey bro i need the RUU version 1.31.720.3,,,, my explorer is SOFT-BRICKED !!!!
where did u get the link plz share,,, i have searched for it everywhere,, but unbale to find...
PLZ PLZ post the link...!!
So last week a friend asked me to s-off his phone for him.. The phone ended up bricking (recovery gone, no os, etc...)..
Where I am at:
1. The phone is S-ON (Actually says "Monarudo PVT Ship S-ON"
2. The phone has an unlocked boot loader
3. The phone has TWRP 2.4 installed
4. HBoot 1.33
5. Radio 1.01.01.0110
6. OpenDSP v6.120.274.0114
7. eMMC-boot
8. The phone has a 4.1.1 based rom installed (Tried carbon 4.3 based, same issue and CM 4.2 based, same issue)
I have tried moonshine and face's s-off with no luck. I get about half way through with moonshine and it just sits there counting, adding periods.
I have tried :
1. Flashing a stock hboot 1.15
2. Flashing the stock splash
3. Flashing the stock RUU
Issues :
1. The phone gets NO reception Just the X with empty bars. I don't know if its the radio or something. Every once and a while I get 2 bars for a second but it goes away.
PLEASE HELP! I feel horrible that my buddy has to borrow my bionic until this is fixed.
when I tried the stock RUU from HTC it gets to a point and fails telling me incorrect image or seomthing like that.. Should have written it down, I can run it again if the error helps.
janderson2k said:
when I tried the stock RUU from HTC it gets to a point and fails telling me incorrect image or seomthing like that.. Should have written it down, I can run it again if the error helps.
Click to expand...
Click to collapse
Have you tried doing moonshine in ubuntu live cd/usb?
janderson2k said:
So last week a friend asked me to s-off his phone for him.. The phone ended up bricking (recovery gone, no os, etc...)..
Where I am at:
1. The phone is S-ON (Actually says "Monarudo PVT Ship S-ON"
2. The phone has an unlocked boot loader
3. The phone has TWRP 2.4 installed
4. HBoot 1.33
5. Radio 1.01.01.0110
6. OpenDSP v6.120.274.0114
7. eMMC-boot
8. The phone has a 4.1.1 based rom installed (Tried carbon 4.3 based, same issue and CM 4.2 based, same issue)
I have tried moonshine and face's s-off with no luck. I get about half way through with moonshine and it just sits there counting, adding periods.
I have tried :
1. Flashing a stock hboot 1.15
2. Flashing the stock splash
3. Flashing the stock RUU
Issues :
1. The phone gets NO reception Just the X with empty bars. I don't know if its the radio or something. Every once and a while I get 2 bars for a second but it goes away.
PLEASE HELP! I feel horrible that my buddy has to borrow my bionic until this is fixed.
Click to expand...
Click to collapse
Try
1 You need update to new Firmware 2.06 (for moonshine)
2 You need to Re lock Bootloader in order to RUU
3 you need to downgrade Hboot to 1.15 to RUU ( your phone show 1.33)
http://forum.xda-developers.com/showthread.php?t=2293919&highlight=flash+radio
Hope this help buddy
finanandroid said:
Try
1 You need update to new Firmware 2.06 (for moonshine)
2 You need to Re lock Bootloader in order to RUU
3 you need to downgrade Hboot to 1.15 to RUU ( your phone show 1.33)
http://forum.xda-developers.com/showthread.php?t=2293919&highlight=flash+radio
Hope this help buddy
Click to expand...
Click to collapse
Anyone have a recommended method to downgrade the hboot? I havnt been able to get the 1.15 to flash to the phone.. Relocking the bootloader is cake.
I appreciate your help, Sorry if I sound n00bish.
janderson2k said:
Anyone have a recommended method to downgrade the hboot? I havnt been able to get the 1.15 to flash to the phone.. Relocking the bootloader is cake.
I appreciate your help, Sorry if I sound n00bish.
Click to expand...
Click to collapse
Every one learn everyday.
Download 1.15 stock hboot. Rename to PL83IMG.zip. when u renamed it make sure is not zip.zip cause this file is already zip so u try only to rename it to PL83IMG (right click the file in your pc and check properties to make sure windows got it already as a zip extension) and place in the folder that contains ( in ur pc) your android-adb folder*
there is where any zip should go, with the exception of user preferences location. (or different folder named by the user)
Step 1) adb reboot bootloader
Step 2) fastboot oem rebootRUU
Step 3) Command to directory containing your renamed hboot zip (i.e. C:\android-adb\)
Step 4) fastboot flash zip PL83IMG.zip
*** When it says it is done in the terminal/cmdprompt execute step 5 )
[The green bar only fills up about 75% of the way]
Step 5) fastboot reboot-bootloader
Profit. Put the RUU Folder in same directory. right click and run it as administrator
soff
W00t! S-Off is done.. HBoot time....
?
finanandroid said:
Every one learn everyday.
Download 1.15 stock hboot. Rename to PL83IMG.zip. when u renamed it make sure is not zip.zip cause this file is already zip so u try only to rename it to PL83IMG (right click the file in your pc and check properties to make sure windows got it already as a zip extension) and place in the folder that contains ( in ur pc) your android-adb folder*
there is where any zip should go, with the exception of user preferences location. (or different folder named by the user)
Step 1) adb reboot bootloader
Step 2) fastboot oem rebootRUU
Step 3) Command to directory containing your renamed hboot zip (i.e. C:\android-adb\)
Step 4) fastboot flash zip PL83IMG.zip
*** When it says it is done in the terminal/cmdprompt execute step 5 )
[The green bar only fills up about 75% of the way]
Step 5) fastboot reboot-bootloader
Profit. Put the RUU Folder in same directory. right click and run it as administrator
Click to expand...
Click to collapse
So I am not sure whats up but I went through the process :
Code:
C:\adb>fastboot oem rebootRUU
< waiting for device >
...
(bootloader) Start Verify: 0
OKAY [ 0.051s]
finished. total time: 0.052s
C:\adb>fastboot flash zip PL83IMG.zip
< waiting for device >
sending 'zip' (434 KB)...
OKAY [ 0.218s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping & flushing...
(bootloader) [RUU]UZ,hboot,0
(bootloader) [RUU]UZ,hboot,50
(bootloader) [RUU]UZ,hboot,100
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
OKAY [ 2.020s]
finished. total time: 2.241s
C:\adb>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.046s]
finished. total time: 0.048s
and when I get back to bootloader it still says HBoot 1.33.. I used this hboot : http://www.mediafire.com/download.php?pj2lknq5gr0jkmf
Any ideas?
I have the same Problem,but my Phone ist S-ON and Locked with H-Boot 1.33
Radio 1.01.04.0308
OpenDSP v4.120.240.0920
No Recovery,no Root,aahh
I can´t Unlock the Bootloader
Error Code: 160.
Error Reason: MID Not Allowed.
I can´t Downgrade to 1.15
c:\ADB>fastboot flash zip PL83IMG
sending 'zip' (434 KB)...
OKAY [ 0.203s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 0.250s
What can i do?
Should I try RUU now or do I need hboot @ 1.15?
janderson2k said:
Should I try RUU now or do I need hboot @ 1.15?
Click to expand...
Click to collapse
yes u need Hboot, but you did before unlock, s-off with moonshine method or revone?
you can try RUU now but If you get an Image 158 error during RUU, try flashing the stock hboot again.
All sorted out.. Thanks everyone. I s offed, unlocked, and flashed new radio. All is well
Sent from my SCH-I605 using Tapatalk 2
letschky said:
I have the same Problem,but my Phone ist S-ON and Locked with H-Boot 1.33
Radio 1.01.04.0308
OpenDSP v4.120.240.0920
No Recovery,no Root,aahh
I can´t Unlock the Bootloader
Error Code: 160.
Error Reason: MID Not Allowed.
I can´t Downgrade to 1.15
c:\ADB>fastboot flash zip PL83IMG
sending 'zip' (434 KB)...
OKAY [ 0.203s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 0.250s
What can i do?
Click to expand...
Click to collapse
Is there no possibility?
I wanted Moonshine S-OFF,'ve updated the firmware and forgot to unlock the bootloader.
Now I have the software version 1.15.605.1, but the HBOOT version is 1.33 wlan can not be switched on and the screen flickers often know clearly wrong boot.img of the software2.06 and the modules from 1.15.
and I can not unlock the bootloader also'm not unlock with my old Unlock_code.bin.
I know now no longer continue...
Go here http://chat.andirc.net:8080/?channels= this People help
Today I had the same problem in my 10 minutes dna worked again
http://forum.xda-developers.com/showthread.php?t=2293919&page=15&nocache=1
Followed the tutorial above to revert back to stock and couldn't get my Hboot to 1.15 and i was stuck on 1.33. Anyway spent some of today and got it figured out and worked 100%.
The problem was step - 3. run the RUU as admin (right click, run as administrator) ** If you get an Image 158 error during RUU, try flashing the stock hboot -SEE POST 4**
1. download 1.15 stock hboot: 1.15 stock hboot MD5: B4B8555C20724E12C3B9D33820746E50
2. Rename stock hboot file to : PL83IMG.zip and place in the folder that contains your fastboot.exe file (On your computer)
3. Flash hboot.
after installation do the following -
adb devices (your device should be listed)
adb reboot bootloader
fastboot devices (your device should be listed)
fastboot oem writecid VZW__001 (2 underscores)
fastboot reboot-bootloader
fastboot getvar cid (verify your stock CID)
fastboot oem writesecureflag 3
fastboot reboot-bootloader
Kept on getting error 158 and couldn't change Hboot so i tried run the command to write the cid "fastboot oem writecid VZW__001" then ran the ruu again and it worked. Its wasn't working because the phone wasn't recognized because of the CID. I couldn't reply in that thread because i don't have 10+ posts. Please hit the thanks button if it works for you as well.
Its my second post so take it easy on me if its been covered already.
Not true. With supercid any RUU can be flashed.
I RUU'd two days ago with supercid. Hboot does need to be stock if using the HTC program to flash.
Abu. said:
http://forum.xda-developers.com/showthread.php?t=2293919&page=15&nocache=1
Followed the tutorial above to revert back to stock and couldn't get my Hboot to 1.15 and i was stuck on 1.33. Anyway spent some of today and got it figured out and worked 100%.
The problem was step - 3. run the RUU as admin (right click, run as administrator) ** If you get an Image 158 error during RUU, try flashing the stock hboot -SEE POST 4**
1. download 1.15 stock hboot: 1.15 stock hboot MD5: B4B8555C20724E12C3B9D33820746E50
2. Rename stock hboot file to : PL83IMG.zip and place in the folder that contains your fastboot.exe file (On your computer)
3. Flash hboot.
after installation do the following -
adb devices (your device should be listed)
adb reboot bootloader
fastboot devices (your device should be listed)
fastboot oem writecid VZW__001 (2 underscores)
fastboot reboot-bootloader
fastboot getvar cid (verify your stock CID)
fastboot oem writesecureflag 3
fastboot reboot-bootloader
Kept on getting error 158 and couldn't change Hboot so i tried run the command to write the cid "fastboot oem writecid VZW__001" then ran the ruu again and it worked. Its wasn't working because the phone wasn't recognized because of the CID. I couldn't reply in that thread because i don't have 10+ posts. Please hit the thanks button if it works for you as well.
Its my second post so take it easy on me if its been covered already.
Click to expand...
Click to collapse
Changing the cid was only needed for the jtag or face palm methods...