HELLO FELLOW GP 5.0 USER,
** DUE TO DEMAND HERE IS THE DROP BOX LINK https://www.dropbox.com/sh/a2bylvatf6aokfr/ytm9El1Tsa/Superuser acess/superuseracessfix.zip
I HAVE BEEN ABLE TO WORK AROUND SOME FEW THINGS TO HAVE THE BLUETOOTH FIXED ON THE ORIGINAL JACPOTCALVIN CM9 BASED ROM .
CURRENTLY AM USING THE ENTHROPY512'S KERNEL AND EVERYTHING IS WORKING
SMOOTHLY.
PLEASE YOUR DEVICE HAVE TO BE ROOT. FOR INSTRUCTIONS CHECK THE DEVELOPMENT FORUM.
AND PLACE THE ZIP FILE INTO INTERNAL STORAGE AND NAVIGATE TO INSTALL FROM SD CARD( THAT IS AFTER BOOTING INTO CWM BY HOLDING THE POWER+VOL UP AND RELEASE POWER AS SOON AS THE SAMSUNG LOGO APPEARS)
2.PLEASE DO A BACKUP OF YOUR DEVICE AT CWM. ALSO IF YOU DON'T WANT TO LOOSE INSTALLED APPS, JUST BOOT IN CWM AND INSTALL THE ZIP FILE WITHOUT WIPING CACHE AND RESTORING TO FACTORY SETTINGS.
THANKS TO JACKPOTCALVIN AND ENTROPY512 AND ALL THE GREAT DEVELOPERS WE HAVE HERE. THANK YOU.
AND I WELCOME ANY IMPROVEMENT THAT CAN BE DONE
ENJOY.
Way to get Bluetooth fixed!! This should be in development section not general!! Some people have been looking or a Bluetooth fix for ICS! Nice work!
Wow, just Wow.
Gonna try it tonight and report back.
Bluetooth is actually what was holding me back from using any ICS ROM as my daily driver, I couldn't care less about the camera, is crappy anyway.
Thank you for the effort.
Sent from my Galaxy Nexus
link is dead
This is awesome! Thanks for the work. I may flash this later, so I can pair my wiimote with my GP5.
Sent from my YP-G70 using XDA
EcHoFiiVe said:
Way to get Bluetooth fixed!! This should be in development section not general!! Some people have been looking or a Bluetooth fix for ICS! Nice work!
Click to expand...
Click to collapse
Did you download it please upload to a site for others. my link is getting killed am working on a nother link.
EcHoFiiVe said:
Way to get Bluetooth fixed!! This should be in development section not general!! Some people have been looking or a Bluetooth fix for ICS! Nice work!
Click to expand...
Click to collapse
I can't move it development because am not been allowed. may be the forum MOD will do that.
Ratchewer said:
Did you download it please upload to a site for others. my link is getting killed am working on a nother link.
Click to expand...
Click to collapse
Link is not working... can you please PM the file?
BTW? What is the attached .tar file? I see it's a zImage file. Is this what I need to flash?
dorfd1 said:
link is dead
Click to expand...
Click to collapse
link is alive. I just uploaded it again. Enjoy
Do we flash the TAR File "DD_01142012.tar" with ODIN?, is that the fix alone, instead of the whole ROM from the two previous links?
EDIT: The TAR File is Entropy's Daily Driver Kernel.
SirRhor said:
Do we flash the TAR File "DD_01142012.tar" with ODIN?, is that the fix alone, instead of the whole ROM from the two previous links?
EDIT: The TAR File is Entropy's Daily Driver Kernel.
Click to expand...
Click to collapse
yes flash the .TAR with odin.Thats enthropy512' kernel.
Does it work with any newer version of Entropy's kernel, or just the attached one?
Sent from my YP-G70
Mevordel said:
Does it work with any newer version of Entropy's kernel, or just the attached one?
Sent from my YP-G70
Click to expand...
Click to collapse
It does work with the newest one, I testing this ROM with it right now.
Hey does this by anyway work with the INTL version, I mean I can use the JackPot's ROM with Noisyfox's patch but I don't think the kernel is compatible.
pmdisawesome said:
Hey does this by anyway work with the INTL version, I mean I can use the JackPot's ROM with Noisyfox's patch but I don't think the kernel is compatible.
Click to expand...
Click to collapse
Try flashing this one then:
http://forum.xda-developers.com/showthread.php?t=1414565
SirRhor said:
Try flashing this one then:
http://forum.xda-developers.com/showthread.php?t=1414565
Click to expand...
Click to collapse
rumirand's kernel? I have it on my device already. Does it work? And noob question, will flashing a new ROM via CWM change the device kernel? Since I flashed rumirand's r14 kernel on Stock ROM, so if I flash a ICS ROM, what kernel do I have?
Ratchewer said:
Did you download it please upload to a site for others. my link is getting killed am working on a nother link.
Click to expand...
Click to collapse
What files did you have to change/edit not just the Bluetooth.apk did you decide to edit the framework if so it would be nice if you could tell me so i could implement it into my rom thanks
Rueben_ said:
What files did you have to change/edit not just the Bluetooth.apk did you decide to edit the framework if so it would be nice if you could tell me so i could implement it into my rom thanks
Click to expand...
Click to collapse
I have PM you and supermaster34.
Whats new in the version called display density?
If its a modification to this rom, it should be posted here, not in a separate post as it will confuse people
If you've only changed the display density then its not really an update as you can do this with many apps from Google Play. If you have changed other things too then please ignore this post (I'm going to test it once it downloads)
Please upload your roms to mediafire or somewhere else with fast downloads as deposit files have the slowest downloads ever
Out of curiosity, can I just simply download Entropy's kernel from his thread, and just flash that? Or is this a modified version for CM9?
Related
This is for those of you who like Samsung stock stuff.
I've created a deodexed ROM from stock XWKL1 firmware.
Its rooted with ChainsDD and BusyBox added.
The freedom of custom with the stock touch...enjoy!
Installation instructions :
1. Copy the ZIP to your sdcard
2. Flash via CWM Recovery.
3. Do a wipe data/factory reset if need.
4. Enjoy
Download the ZIP here.
Hope it helps people
Debadatta said:
This is for those of you who like Samsung stock stuff.
I've created a deodexed ROM from stock XWKL1 firmware.
Its rooted with ChainsDD and BusyBox added.
The freedom of custom with the stock touch...enjoy!
Installation instructions :
1. Copy the ZIP to your sdcard
2. Flash via CWM Recovery.
3. Do a wipe data/factory reset if need.
4. Enjoy
Download the ZIP here.
Hope it helps people
Click to expand...
Click to collapse
Thank you soooo much my friend!!! You saved my life!!! Haha! Exactly what i was lookin' for! Could you explain me in a PM how to deodex a rom please...?
Thanx again for the great work!
Check here http://forum.xda-developers.com/showthread.php?t=633246
SPACE ALIEN said:
Thank you soooo much my friend!!! You saved my life!!! Haha! Exactly what i was lookin' for! Could you explain me in a PM how to deodex a rom please...?
Thanx again for the great work!
Click to expand...
Click to collapse
af974 said:
Check here http://forum.xda-developers.com/showthread.php?t=633246
Click to expand...
Click to collapse
Main problems I had when trying to deodex XWKL1 with dsixda:
Voice Search, Maps, and Phonesky (the new name for the Market APK) would not deodex. This was solvable by:
Pulling VoiceSearch.apk from XXKI3
Pulling the updated Market APK from a working device and replacing Phonesky.apk with it
I didn't bother with Maps because it can be installed from the Market
The remaining issue I have:
On my device, when I press the Back button to exit from video playback, the video player hangs instead of exiting. It seems to be specific to my attempt at deodexing with dsixda.
Edit - Two major issues with your post:
1) You should state the base in the thread title
2) Your release is broken - you didn't bother to rectify the failure of the Market APK to deodex, and as a result, there is no Market in it.
However video playback is working, so it's time to figure out why that isn't working on my own deodexed device.
thx for the f/back, need to wait for market fix first b4 using this
SPACE ALIEN said:
Thank you soooo much my friend!!! You saved my life!!! Haha! Exactly what i was lookin' for! Could you explain me in a PM how to deodex a rom please...?
you can try to deodex rom with xUltimate vs2.2.8;for me is perfect.
Click to expand...
Click to collapse
i am a new in sgs stuffs i want to know what difference between KL1 AND KL2 i know that KL2 is the latest .thanks
Are there any bugs?
zemariaabreusantos said:
Are there any bugs?
Click to expand...
Click to collapse
One bug got to be known today is that Phonesky.apk (Market) failed to deodex and it is not included in the ROM. However, you can install market manually. See attached file.
Report back if you have problems.
zenosteam said:
i am a new in sgs stuffs i want to know what difference between KL1 AND KL2 i know that KL2 is the latest .thanks
Click to expand...
Click to collapse
nop. the latest are LA2 and LA4
question to forum mods. should this be in original android development or in android development ? I say this cause I have a few odexed deodexed roms myself and I use the android development instead of original.
best regards,
remorema
Please if someone could post here a link contains the Android package installer.APK odexed from XWKL1, I'd be grateful. thank you.
ok got it, thank you guys
this should be in android dev and not Original development::: MOd's move this thread please
belongs in the android development
Hi guys how I stock orders?
I've read, but I could not understand :S
afemesya said:
Hi guys how I stock orders?
I've read, but I could not understand :S
Click to expand...
Click to collapse
Please elaborate your question.
Sent from my GT-I9100 using Tapatalk
Debadatta said:
One bug got to be known today is that Phonesky.apk (Market) failed to deodex and it is not included in the ROM. However, you can install market manually. See attached file.
Report back if you have problems.
Click to expand...
Click to collapse
Hi
I installed the market apk as attached, but it keeps forceclosing - I've tried everything!
Help!
Cheers!
guy3001 said:
Hi
I installed the market apk as attached, but it keeps forceclosing - I've tried everything!
Help!
Cheers!
Click to expand...
Click to collapse
Deodexed market is a hard thing to find. Now even more because its Google play. I'll try to fix them in the ICS version.
Sent from my GT-I9100 using Tapatalk
CWM Updater script?
Hi,
Could anyone please provide me the CWM updater script found in this deodexed rom?
Thanks in advance.
Hi,
I'm posting this question here in the hopes that someone will be kind enough to help me since I don't have the post count to post in the development section.
I installed the omega ROM and really like it but I need the Email.apk that is not included in this ROM. When I copy the Email.apk from other 2.3.6 stock based ROMs the app constantly FCs. Does anybody have an Email.apk and/or Email.odex that will work with this ROM.
Thanks for your help.
Cheers!!
Should i suggest a thing?
First backup your system.then go flash any rom which has that that email.apk.
Then open titanihm backup and backup the email app. Then go to cwm recovery and restore omega rom and then restore the app again via titanium backup. This shud work
. If it doesnt work then tell me. I will upload the email apk.
Sent from my GT-S5830 using XDA App
PRESS THNX IF I HELPED
Aashay Sathe
Thanks for your response. I tried your suggestion but it still FCs as soon as the phone powers up.
I think it's because the omega rom is odexed and all the 2.3.6 based roms that I have are deodexed.
When I look at the /system/app directory all system apps have an .apk and a corresponding .odex file of each application.
If you have a 2.3.6 odex version of Email.apk I would really appreciate it if you could upload it.
Thanks for your help!!
Here you go
This should work just flash via CMW5
Good Luck and Enjoy your LIFE!
ANDROIDCUSTOMIZe said:
This should work just flash via CMW5
Good Luck and Enjoy your LIFE!
Click to expand...
Click to collapse
Thanks,
I will give it a try...
ANDROIDCUSTOMIZe said:
This should work just flash via CMW5
Good Luck and Enjoy your LIFE!
Click to expand...
Click to collapse
Doesn't work. I flashed via CMW5 but gave me a status 6 error. I copie the files via ADB in /swystem/app but no go. Thanks anyway!
keftes said:
Hi,
I'm posting this question here in the hopes that someone will be kind enough to help me since I don't have the post count to post in the development section.
I installed the omega ROM and really like it but I need the Email.apk that is not included in this ROM. When I copy the Email.apk from other 2.3.6 stock based ROMs the app constantly FCs. Does anybody have an Email.apk and/or Email.odex that will work with this ROM.
Thanks for your help.
Cheers!!
Click to expand...
Click to collapse
Put the files from the zip in "system/app".
Attached.
shaaan said:
Put the files from the zip in "system/app".
Attached.
Click to expand...
Click to collapse
I will try it and report back if it works. Thanks!!
shaaan said:
Put the files from the zip in "system/app".
Attached.
Click to expand...
Click to collapse
Works like a charm. Much appreciated!!
keftes said:
Works like a charm. Much appreciated!!
Click to expand...
Click to collapse
Thankyou.
Btw i developed it so i knew what had to be added.
shaaan said:
Thankyou.
Btw i developed it so i knew what had to be added.
Click to expand...
Click to collapse
Shaaan,
Keep up the great work!! Like I said I love this rom and looking forward to future versions.
keftes said:
Shaaan,
Keep up the great work!! Like I said I love this rom and looking forward to future versions.
Click to expand...
Click to collapse
Guys, I have just copied the files to "system/app" ... nothing... i even don't see the icon in the applications list... whould I flash the zip and add the files or just add the files?
Thanks
BeckMSTU said:
Guys, I have just copied the files to "system/app" ... nothing... i even don't see the icon in the applications list... whould I flash the zip and add the files or just add the files?
Thanks
Click to expand...
Click to collapse
Did you extract the files on your computer first and then add them to system/app?
Did you reboot your phone after putting the files there?
Sent from my GT-S5830 using XDA App
1.first backup ur rom via cwm.
2.install any rom with the app u r searchin for.
3.install titanium backup pro and convert email app from system app to user app.
4.backup the email app.
5. restore omega and restore email app.....
hope it works......
Thanks, I have installed "EE mail"... it works...
For all who want desperately to make the Dual speakers of LWW work in the new ICS Roms (FXP Cm9) etc, Please REPLACE or ADD the following files (attached) in the zip file of the respective Rom that you are using in the CORRECT PATHS, before flashing that Rom in CWM. The paths are already given in the "RAR" archive, but for your convenience, I'm writing them once again.
For a CWM Flashble Zip (Dual Speakers and X-loud) For FXP CM9 Check ATTACHMENT....Flash It After flashing CM9....in CWM...
File Paths for Dual Speakers :
/system/bin/mediaserver
/system/lib/hw/audio.primary.default.so
/system/lib/hw/audio.primary.msm7x30.so
/system/lib/hw/audio_policy.default.so
/system/lib/hw/audio_policy.msm7x30.so
/system/lib/liba2dp.so
/system/lib/libaudioeq.so
/system/lib/libaudioflinger.so
/system/app/AudioEffectService.apk
/system/etc/audio_effects.conf
/system/etc/permissions/com.sonyericsson.audioeffectif.xml
/system/framework/semc_audioeffectif.jar
/system/vendor/etc/audio_effects.conf
Hope this makes your ICS experience even more 'bug'-less.
CREDITS :
Lasan(FrogyFurnetal) (For the files) , Expeacer (For telling which files to replace or add) , ramezzidane (For the zip) and obviously to all the other Developers for making the amazing builds in which we can try this.
This is experimntal....Dont try if u can't take risks...
Confirmed to work with FXP cm9...So, it does not work on MiniCm or ExMIUI due to different building sources...
For a CWM flashable zip by 'someguyfromhell' check THIS out and post your findings and issues with different Roms. This zip is confirmed to work on GB CM7. The flashable zip in not for ICS Cm9.
Are you tried it with MiniCMSandwich or ExMIUI? Because when we tried last time, the phone don't boot...
expeacer said:
Are you tried it with MiniCMSandwich or ExMIUI? Because when we tried last time, the phone don't boot...
Click to expand...
Click to collapse
Did you check permissions?
XperianPro said:
Did you check permissions?
Click to expand...
Click to collapse
We aren't noobs So, wrong question
kamarush said:
We aren't noobs So, wrong question
Click to expand...
Click to collapse
Just asking
any way tryed this before and didnt worked but I didnt got bootloop.
The file is not attached...
Also, if you want, I can make a Recovery-flashable .zip file.
XperianPro said:
Just asking
any way tryed this before and didnt worked but I didnt got bootloop.
Click to expand...
Click to collapse
In which ROM?
expeacer said:
Are you tried it with MiniCMSandwich or ExMIUI? Because when we tried last time, the phone don't boot...
Click to expand...
Click to collapse
XperianPro said:
Just asking
any way tryed this before and didnt worked but I didnt got bootloop.
Click to expand...
Click to collapse
I tried it with FXP cm9 and it worked like a charm...
Someguyfromhell said:
The file is not attached...
Also, if you want, I can make a Recovery-flashable .zip file.
Click to expand...
Click to collapse
Reuploaded the file...sorry for the issue...
did you try on CM7.2 ? CM9 is not stable yet, thanks very much
noob1995 said:
I tried it with FXP cm9 and it worked like a charm...
Click to expand...
Click to collapse
Yeah... It's good... But that is not same source which we use in MiniCM/MIUI...
noob1995 said:
Reuploaded the file...sorry for the issue...
Click to expand...
Click to collapse
Should I create a CWM-flashable .zip file?
Also, your first post says to replace these files before flashing the ROM. That will not work, because ROM installation replaces these files, causing the dual speakers to not work.
These files need to be replaced after ROM installation.
Someguyfromhell said:
Should I create a CWM-flashable .zip file?
Also, your first post says to replace these files before flashing the ROM. That will not work, because ROM installation replaces these files, causing the dual speakers to not work.
These files need to be replaced after ROM installation.
Click to expand...
Click to collapse
i think he meant to replace theses files in the .zip of the rom and then flash it ??
Someguyfromhell said:
Should I create a CWM-flashable .zip file?
Also, your first post says to replace these files before flashing the ROM. That will not work, because ROM installation replaces these files, causing the dual speakers to not work.
These files need to be replaced after ROM installation.
Click to expand...
Click to collapse
Yeah finally dual speaker support on cm7.2. Can't believe it.
For me cm is the best rom ever.
@Someguyfromhell
Yeas a flashable zip would be great. Please if you have time create one.
Thx
Someguyfromhell said:
Should I create a CWM-flashable .zip file?
Also, your first post says to replace these files before flashing the ROM. That will not work, because ROM installation replaces these files, causing the dual speakers to not work.
These files need to be replaced after ROM installation.
Click to expand...
Click to collapse
a flashable zip would be awesome
thanks
edit: also please report this on the fxp bugtracker,
they may include the fixes in the next release
here:
http://code.google.com/p/freexperia/issues/list
Someguyfromhell said:
Should I create a CWM-flashable .zip file?
Also, your first post says to replace these files before flashing the ROM. That will not work, because ROM installation replaces these files, causing the dual speakers to not work.
These files need to be replaced after ROM installation.
Click to expand...
Click to collapse
prateek_gemini said:
i think he meant to replace theses files in the .zip of the rom and then flash it ??
Click to expand...
Click to collapse
Yeah...I meant to replace the files in the zip on ur PC before flashing that zip....actually once i tried doing that via root explorer but the system crashed and it failed to boot next time...Therefore i though that it would be safe to edit the zip file before flashing...
noob1995 said:
Yeah...I meant to replace the files in the zip on ur PC before flashing that zip....actually once i tried doing that via root explorer but the system crashed and it failed to boot next time...Therefore i though that it would be safe to edit the zip file before flashing...
Click to expand...
Click to collapse
in MiniCM i replaced with root explorer(twice now) it says android upgrading.. starting applications and stays like that,
will try reinstalling the whole thing now
motorazrv3 said:
Yeah finally dual speaker support on cm7.2. Can't believe it.
For me cm is the best rom ever.
@Someguyfromhell
Yeas a flashable zip would be great. Please if you have time create one.
Thx
Click to expand...
Click to collapse
really ?? my phone (WT19i) not able to boot CM7 >"<!
gandhar said:
in MiniCM i replaced with root explorer(twice now) it says android upgrading.. starting applications and stays like that,
will try reinstalling the whole thing now
Click to expand...
Click to collapse
As I said...try editing the files of the zip before flashing....
Tried setting files via file manager, also set the permissions, didn't work.
Sent from my WT19i using xda premium
I was browsing around the web to instal JB and this guide is the best! Sharing it with all, hope it makes it easy for you!
http://web4tech.com/2013/01/03/install-android-412-jelly-bean-hp-touchpad/
ahaq said:
I was browsing around the web to instal JB and this guide is the best! Sharing it with all, hope it makes it easy for you!
http://web4tech.com/2013/01/03/install-android-412-jelly-bean-hp-touchpad/
Click to expand...
Click to collapse
ahaq is this your guide as I notice your name appears to bear some relationship to the writer's ?
The moboot is outdated , the rom and gapps should be renamed to begin update- then they won't need to be installed after boot.
Not sure about using a Rom that the developer has said will not be regularly updated and doesn't actually include camera and gallery .
I hope the writer of the article got oats permission to use his Rom and links.
Otherwise a well written piece .
sstar said:
ahaq is this your guide as I notice your name appears to bear some relationship to the writer's ?
The moboot is outdated , the rom and gapps should be renamed to begin update- then they won't need to be installed after boot.
Not sure about using a Rom that the developer has said will not be regularly updated and doesn't actually include camera and gallery .
I hope the writer of the article got oats permission to use his Rom and links.
Otherwise a well written piece .
Click to expand...
Click to collapse
I've only been able to find version 3.5 of moboot is there a updated version? What should we be renaming the files too BTW?
I'm hoping that all the fixes goes into a Official Nightly Build so we can download and upgraded as needed.
Thanks,
Smitie
---------- Post added at 12:17 PM ---------- Previous post was at 11:34 AM ----------
Smitie said:
I've only been able to find version 3.5 of moboot is there a updated version? What should we be renaming the files too BTW?
I'm hoping that all the fixes goes into a Official Nightly Build so we can download and upgraded as needed.
Thanks,
Smitie
Click to expand...
Click to collapse
Ok I found 3.8 Moboot out there so I'm good there. I have several different files and believe I'm going to go forward with 12/22 Build but would like to known what to rename them too so everything is autoamated.
Thanks,
Smitie
Smitie said:
I've only been able to find version 3.5 of moboot is there a updated version? What should we be renaming the files too BTW?
I'm hoping that all the fixes goes into a Official Nightly Build so we can download and upgraded as needed.
Thanks,
Smitie
---------- Post added at 12:17 PM ---------- Previous post was at 11:34 AM ----------
Ok I found 3.8 Moboot out there so I'm good there. I have several different files and believe I'm going to go forward with 12/22 Build but would like to known what to rename them too so everything is autoamated.
Thanks,
Smitie
Click to expand...
Click to collapse
If your installing via your recovery cwm or TWRP you don't need to rename anything it's only necessary when using acme and a cminstall folder.
moboot 0.3.8:
http://goo.im/devs/jcsullins/cmtouchpad/testing/moboot_038-tenderloin.zip
sstar said:
ahaq is this your guide as I notice your name appears to bear some relationship to the writer's ?
The moboot is outdated , the rom and gapps should be renamed to begin update- then they won't need to be installed after boot.
Not sure about using a Rom that the developer has said will not be regularly updated and doesn't actually include camera and gallery .
I hope the writer of the article got oats permission to use his Rom and links.
Otherwise a well written piece .
Click to expand...
Click to collapse
If you have any better ROM, than please let me know I can replace that!
ahaq said:
If you have any better ROM, than please let me know I can replace that!
Click to expand...
Click to collapse
I am not saying it's a bad rom, just oats has said it won't be updated unless there are major changes. There are several different Roms in the developer's section . You should try them for yourself but I would suggest that unless you put links to the developer's thread that you are best of using ones that updates can easily be checked for with something like Goo Manager .
One question from me when I right click on my Palm ,Inc folder I do not see an option for command prompt ,how do I enable it running Windows 8?(Solved )
Reread your post ,neat trick .
sstar said:
I am not saying it's a bad rom, just oats has said it won't be updated unless there are major changes. There are several different Roms in the developer's section . You should try them for yourself but I would suggest that unless you put links to the developer's thread that you are best of using ones that updates can easily be checked for with something like Goo Manager .
One question from me when I right click on my Palm ,Inc folder I do not see an option for command prompt ,how do I enable it running Windows 8?(Solved )
Reread your post ,neat trick .
Click to expand...
Click to collapse
Glad it worked! And yes its neat compare to others which require hassle! Which one is compatible via goo manager?
ahaq said:
Glad it worked! And yes its neat compare to others which require hassle! Which one is compatible via goo manager?
Click to expand...
Click to collapse
Just DL and install Goo Manager its all there .
PS your link for moboot is still for 0.3.5 we are now up to 0.3.8
Without been bigheaded, I believe my guide IS the easiest one made anywhere to date, I need to make a few more tweaks then I'll post it on here.
theronkinator said:
Without been bigheaded, I believe my guide IS the easiest one made anywhere to date, I need to make a few more tweaks then I'll post it on here.
Click to expand...
Click to collapse
Where is it posted , do you have a link?
sstar said:
Where is it posted , do you have a link?
Click to expand...
Click to collapse
Hi, I need to make a few tweaks based on peoples feedback, will update it and post it as soon as I can (might be a week though till I'm next off work). I'll post on here as soon as it's done though.
thx i got jb
this guide good for newbie like me, n rom good to..but camera review poor for quality it same like cm10 other device..why always camera problem? to hard for build driver right?
thanks for that guide, works perfect for me.
Link does not work!!
ahaq said:
I was browsing around the web to instal JB and this guide is the best! Sharing it with all, hope it makes it easy for you!
Link in OP does not work.
Never upgraded from Web OS
Click to expand...
Click to collapse
Maybe I will give this a shot.
Sent from my i9300 using Tapatalk 2
Thanks!
Present to you the Russian official firmware 4.1.2 "La Fleur" (2-file) with a three-button activation mode
How to flash your smartphone:
- Open Odin, attached to the archive
-- In the "PIT" open "goldenxx.pit"
-- In the "PDA", open "CODE_I8190XXAMA2_809600_REV00_user_low_ship.tar.md5"
-- In the "CSC" open "CSC_QXE_I8190QXEAMA1_20130109.163004_REV00_user_low_ship.tar.md5"
"La Fleur" completely put, in contrast to the single-file. Maybe it's because I ruled "Build.prop"? This is the official firmware, which is about 25MB of updates. Now facepalm
ODIN MODE
PRODUCT NAME: GT-I8190
CUSTOM BINARY DOWNLOAD: YES (1 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
Click to expand...
Click to collapse
In this case, CWM flew down to normal.
Download Firmware. To download, click on the button "Скачать".
mermigas said:
Thanks to our Russian friends here is La' Fleure rooted
http://www.4shared.com/get/3S9gkmzq...sionid=A7D6AE75247EDF65BA7A82655D5A48DA.dc516
Installation through Odin
Click to expand...
Click to collapse
:highfive:
It works, 3 button combination works, at least with stock recovery image, let's test it with TWRP.
Benzonat0r said:
It works, 3 button combination works, at least with stock recovery image, let's test it with TWRP.
Click to expand...
Click to collapse
Works also with Clockwork Mod Recovery touch
Not really development as it is a stock firmware and belongs to general section
I've put a how to about it in general earlier today.
I can confirm that it works.
I can confirm that, it works with every recovery available for S3 Mini.
Great work!
Benzonat0r said:
I can confirm that, it works with every recovery available for S3 Mini.
Great work!
Click to expand...
Click to collapse
Thanks, but this is not my firmware and the official.
How to flash CWM without increasing the counter or how to reset it?
It will be nice if somebody manage to get it rooted
Terrybogard said:
Thanks, but this is not my firmware and the official.
How to flash CWM without increasing the counter or how to reset it?
Click to expand...
Click to collapse
I know I meant great work in finding it.
It's simple, reflash a pre-rooted ROM faria's or Infected's, then install ROM Manager from Play Store and flash CWM via ROM Manager.
And yes 3 button combination will still work.
Three button combo works on my end after flashing the LeFleur ROM. Reflashing Infected_'s 4.1.2 ROM then reflashing TWRP to see if it sticks.
------------------------------------------------------------------------------------------------------------------------------
Confirmed working. Thanks!
Deleted
hey. You have uploaded ROM made by me but even not asked me!
Original thread.
You even used links I provided. My 4shared account: http://www.4shared.com/u/K0MJjxBT/dolar4ik.html
Why you did not add any references?
BTW, It will NOT increase binary count! I tested and reinstalled it 5 or more times. and few users from 4pda.ru too.
So? He just uploaded it, he didn't modify it.
Benzonat0r said:
So? He just uploaded it, he didn't modify it.
Click to expand...
Click to collapse
He even did not upload it. He used my links! I have added the link to my 4shared account.
All changes made by me. Actually, I have 2-file ROM for LaFleur (service firmware) and made clean version based on it.
dolar4ik said:
hey. You have uploaded ROM made by me but even not asked me!
Original thread.
You even used links I provided. My 4shared account: http://www.4shared.com/u/K0MJjxBT/dolar4ik.html
Why you did not add any references?
BTW, It will NOT increase binary count! I tested and reinstalled it 5 or more times. and few users from 4pda.ru too.
Click to expand...
Click to collapse
Sorry but I didnt know that I had to ask before since I dont know russian and I am not a member of 4pda.ru
I am deleting my post If that will make you happy
Again, so what? Besides how the hell would he supposed to know who's ROM is it cause you're not even active here.
dolar4ik said:
He even did not upload it. He used my links! I have added the link to my 4shared account.
All changes made by me. Actually, I have 2-file ROM for LaFleur (service firmware) and made clean version based on it.
Click to expand...
Click to collapse
There's a thanks from me for your efforts.
Sent from my GT-I8190 using Tapatalk 2
From me too if that makes you happier.
Guys. I don`t ask to delete any posts. I just ask to add some references to the author of the ROM.
I have spent few days for investigating service firmware and I asks to respect the work of others.
That`s all.
Anyhow, the thread is made not by you, Benzonat0r and not by you, mermigas.
My message addressed to the thread owner. I ask to add references and author information.
Also, correct information about binary count. and there are 2 mirrors where you can download it:
Yandex.Disk
Dropbox
Listen man, we can all clearly see who made it when we click the link Original thread and we all immediately know it wasn't made by him. So no need to be difficult here.
Now it is all clear and the author has his rights.
Anyhow I installed this ROM.
Copied through root explorer the appropriate csc files to system and through CSC selector I installed EUR CSC.
Results no binary count and Official
PS Asphalt6 is included. Through root explorer Ozon.ru and Pogoda ;;; were removed