could any one can help me?
my x10i suddenly went to no service, emergency calls only,
i am just waiting for my girlfriend to call/text e, but when i notice it's no service already,
i try to restart/reset the phone, sim is fine i'm using on my other phone, and i try different sim it's still the same, reflashed another rom, when back t wolf rom, still no luck.,
i'm running on x10s rom v8 when it happend,
i'm on a locked bootloader, baseband no. is ok, and i notice some thing when there's a sim, the phone does not regonize the sim right, i cannot access the sim contacts,
if i flashed it on stock rom will it locked again? because my phone is a docomo unlocked version,
treboj422 said:
could any one can help me?
my x10i suddenly went to no service, emergency calls only,
i am just waiting for my girlfriend to call/text e, but when i notice it's no service already,
i try to restart/reset the phone, sim is fine i'm using on my other phone, and i try different sim it's still the same, reflashed another rom, when back t wolf rom, still no luck.,
i'm running on x10s rom v8 when it happend,
i'm on a locked bootloader, baseband no. is ok, and i notice some thing when there's a sim, the phone does not regonize the sim right, i cannot access the sim contacts,
if i flashed it on stock rom will it locked again? because my phone is a docomo unlocked version,
Click to expand...
Click to collapse
Hi, ur baseband is .71right? try flash DooMLoRD's kernel moderate overclock one. Perhaps might help boost ur signal. If not, ask here again
Sincerely,
Whitefang
Place kindly hit "thanks" button as appreciation
Sent From x10i 2.3.7 DonutHD2.1 ROM(locked bootloaded)
Added:
*WF ICON-PANE-MODDED nEW Home Launcher(ICS xperia built, spyware/ad-free)
*WF Improved ICS-ish Lockscreen for DonutHD
*xLoud & BRAVIA engine
*54fps uncapped
yes. my baseband is .71 ,my bootloader is locked, can i still flashed it? and how??
and i noticed when i inserted a sim it doesn't show insert sim card, and i cannot access the sim, (sim contacts doesn't show) so i think there's a problem reading with my sim card,..
hayy, i'm loosing hope to send it for repair or sell as defective :|
just an update..
i already flashed it to 2.1 still no luck,
flashed it to stock 2.3, rooted. still cannot read my sim card, i think it's a hardware problem.. :|
treboj422 said:
yes. my baseband is .71 ,my bootloader is locked, can i still flashed it? and how??
and i noticed when i inserted a sim it doesn't show insert sim card, and i cannot access the sim, (sim contacts doesn't show) so i think there's a problem reading with my sim card,..
hayy, i'm loosing hope to send it for repair or sell as defective :|
just an update..
i already flashed it to 2.1 still no luck,
flashed it to stock 2.3, rooted. still cannot read my sim card, i think it's a hardware problem.. :|
Click to expand...
Click to collapse
That's weird, I din meet suchprob when I was in x10s(perhaps u PM championswimmer).
Try remove ur simcard and use eraser rub ur card chip and put it back again. Probably can't read info/need time analyse.
And I confused...you said u were locked when x10s, but unlocked in docomo. What is ur current status actually? Try use S1Tool for identifying ur version here: http://forum.xda-developers.com/showthread.php?t=1259617
If ur version is "R8**" instead of "r8**",means locked.
Whitefang
Sent from my X10i using XDA
i already tried 5 sim cards and they are all working on another phone, my phone is from docomo and it's sim unlock and my bootloader is locked, i searched the net and it's "R8" i think it is unlocked by codes not thru a box,
is there any easy hardware fix could you provide or something? i also tried to replace a new sim card holder ( the whole sim card, memory slot, photo light assembly and problem still persist, hay..)
if u flash the original is it provided by docomo if yes then u can try flashing else if not then network might be locked !!
i already restore to wolf break rom, v6, still it cannot detect the som card, i already got it with that rom, and it worked fine, until it went to no service,.
Related
I have tried everything, I relock the bootloader and it has turned a capital R, I tried to install backups, I tried to reinstall the original seus.
and nothing. I still have the cell phone signal!
Help me please guys, you are hard on the issue.
excuseme for my english
edit: i unlock simlock with setool2
kmilopunk said:
I have tried everything, I relock the bootloader and it has turned a capital R, I tried to install backups, I tried to reinstall the original seus.
and nothing. I still have the cell phone signal!
Help me please guys, you are hard on the issue.
excuseme for my english
edit: i unlock simlock with setool2
Click to expand...
Click to collapse
I think this is important:
whenever I get the start menu choose the language (so I have chosen before) and also whenever I get "insert sim card and restart the phone"
kmilopunk said:
I think this is important:
whenever I get the start menu choose the language (so I have chosen before) and also whenever I get "insert sim card and restart the phone"
Click to expand...
Click to collapse
Maybe ur simlock got reinstalled.. spyderX had warned of this in his guide here maybe u can try to use setool2 to re-sim-unlock your phone???
Simlock sucks!!!
as it will hurt my pocket money, but good.
I have to re-pass the setool2 with bootloader unlocked already?
or if not, I can use another method of release, or has to be the setool2 mandatory?
Thanks for resolving my doubts.
kmilopunk said:
as it will hurt my pocket money, but good.
I have to re-pass the setool2 with bootloader unlocked already?
or if not, I can use another method of release, or has to be the setool2 mandatory?
Thanks for resolving my doubts.
Click to expand...
Click to collapse
setool is free right??? google it u can download it and save some pocket money
Not sure of the process though
rosshalz said:
setool is free right??? google it u can download it and save some pocket money
Not sure of the process though
Click to expand...
Click to collapse
what happens is you need a special box and that's what I have no
be that if I use the unlock code method, I will serve? or must be for the same use.
I unlock my bootloader in the u20i, and i lost de Wi-Fi ( ERROR). So i install again the CM7 Rom + FullWipe and work!
I don't now about you signal, just work here the Wi-Fi.
Cloulu said:
I unlock my bootloader in the u20i, and i lost de Wi-Fi ( ERROR). So i install again the CM7 Rom + FullWipe and work!
I don't now about you signal, just work here the Wi-Fi.
Click to expand...
Click to collapse
I try to follow what I wanted to do: Install DX nakernel ginger.
but it still did not work and return it to the officer, and I do not work ....
Right now I have left is to test again for setool2 fun ... if that does not fix it do not know what else to do. Here in Colombia, the service technician's own cell phone companies is not be very good to say
hello, I could have power again
but I returned to block the bootloader.
may be that you unlock? without losing the signal again?
I have similar problem:
I have applied the MiniCM7-2.1.1 on my unlocked phone. Everything went fine but the signal has been lost.
The phone stills finds the network carriers in my country.
But when I try to choose the one I use, it says registering network and just after that "SIM does not allow conection to the network".
I've tried two different SIM form different carriers (I purchased an unlocked phone) with the same results
After MiniCM7-2.1.1 It was working OK
Now I've tried to SEUS and it went back succesfully to stock 2.1
But The signal problem persists.
Could you please advise / help??
Firmware 2.1-update1
Baseband the one ending 4015
Kernel 2.6.29
[email protected]#1
Compilation 2.1.1.A.0.6
i didnt bought the cellphone unlock, was released by setool2 and the solution was to move the backup you had made the program.
persisted bootloader lock!
I can do, be that doing the process from the stock 2.1 will now leave you?
guzeven said:
I have similar problem:
I have applied the MiniCM7-2.1.1 on my unlocked phone. Everything went fine but the signal has been lost.
The phone stills finds the network carriers in my country.
But when I try to choose the one I use, it says registering network and just after that "SIM does not allow conection to the network".
I've tried two different SIM form different carriers (I purchased an unlocked phone) with the same results
After MiniCM7-2.1.1 It was working OK
Now I've tried to SEUS and it went back succesfully to stock 2.1
But The signal problem persists.
Could you please advise / help??
Firmware 2.1-update1
Baseband the one ending 4015
Kernel 2.6.29
[email protected]#1
Compilation 2.1.1.A.0.6
Click to expand...
Click to collapse
Did you get this fixed? I am having exactly the same problem. Any help you can give would be appreciated
I'm the same situation :'(
try flashing a baseband which ends wit 06 at the end..
hit thanx if dis helped u
---------- Post added at 09:33 PM ---------- Previous post was at 09:19 PM ----------
ScalesOnline said:
Did you get this fixed? I am having exactly the same problem. Any help you can give would be appreciated
Click to expand...
Click to collapse
download s1 tool and check the simlock status and unlock the bootloader with the instructions provided in the following thread
forum.xda-developers.com/showthread.php?t=1256969
if that did not work try flashing different baseband
hit thanx if diz helped u
Please somebody i don`t know what to do more!!!
i have a rooted xperia x10 wich doesn`t log onto the network. my carrier is Orange. the sim card is a new one, cauze i changed it. i have full signal bars but when i enter settings/wireless/network/search network - it finds orange 2G and 3G but when i tap on it it says at first logging on Orange... but after 30 seconds or so, it says : ERROR cannot connect to the network. i would like to mention that the phone worked on this carrier.
Have u installed a rom or kernel on it at all?
Sent from my Xperia X10 using XDA
yes i`ve instaled Oddie`s miui rom and darkHD rom but to instal the miui rom i`ve used the locked bootloader way, that means my bootloader is loocked, now i`m on stock, that was put on using SEUS.
this morning i`ve successfully unlocked my bootloader and curently running MOOKE`s rom. but i still can`t connect to a network. sholud i take my phone to a service to do a sim unlock? can it be that the problem?
Take out sim card and insert again.
Do flash kernel and flash rom as follow OP instruction
Done ^_^. HOpe this help u.
Or
Install kernel and flash rom then insert Sim.
Problem solved
did a recovery through seus, then rooted with flashtool, then reinstaled flashtool and drivers, then did an bootloader unlock and voila, got signal and network connection, flashed MOOke`s rom, which has a very good batery life. thanks
good!
Hello,
i have worked with dixperia 7 without unlocked BL for ~2/3 month and today i become information "Insert sim card". I dont do anything with rom and i have problem. I checked another sim and the same problem :/ I checked with SEUS, and the same, and with 2.1 stock rom from flashtool and nothing :/ What's happened ? Problem with sim adapter?
Kalaszek said:
Hello,
i have worked with dixperia 7 without unlocked BL for ~2/3 month and today i become information "Insert sim card". I dont do anything with rom and i have problem. I checked another sim and the same problem :/ I checked with SEUS, and the same, and with 2.1 stock rom from flashtool and nothing :/ What's happened ? Problem with sim adapter?
Click to expand...
Click to collapse
Are u inserting the sim right way??
i mean as indicated on the panel...
this is silly but need to b considered
Kalaszek said:
Hello,
i have worked with dixperia 7 without unlocked BL for ~2/3 month and today i become information "Insert sim card". I dont do anything with rom and i have problem. I checked another sim and the same problem :/ I checked with SEUS, and the same, and with 2.1 stock rom from flashtool and nothing :/ What's happened ? Problem with sim adapter?
Click to expand...
Click to collapse
Did you make a backup after installing the Rom? If yes restore after formatting system, data,cache in XRECOVERY.
Did you complete a pc companion REPAIR through support?
~Jaramie
from my LT28at rooted & eating an Ice Cream Sandwich
WELL I KNOW I DID A HUGE MISTAKE AND I M AN IDIOT AND I HAD TO READ THE INSTRUCTIONS FIRST
i had the "NOT RECOGNIZED SIMLOCK CERTIFICATE" but i tried to unlock my boot loader using the-laser's (x10_bootloader_unlock.exe)
and now i ve lost my signal
when i look for network operator it give me all of them. but it cant connect to my netork operator .sim toolkit is still working
it look like he dont recognize my sim card . WHAT SHOULD I DO
ps : pccompanion dont work
You will need to contact @THE-laser to fix that for you. One price for both unlock sim and bootloader.
are you saying that i should unlock my sim ?
!!!!!!
Relock your bootloader. What tool u use to unlock?
Sent from my Desire HD using xda app-developers app
karimwac said:
WELL I KNOW I DID A HUGE MISTAKE AND I M AN IDIOT AND I HAD TO READ THE INSTRUCTIONS FIRST
i had the "NOT RECOGNIZED SIMLOCK CERTIFICATE" but i tried to unlock my boot loader using the-laser's (x10_bootloader_unlock.exe)
and now i ve lost my signal
when i look for network operator it give me all of them. but it cant connect to my netork operator .sim toolkit is still working
it look like he dont recognize my sim card . WHAT SHOULD I DO
ps : pccompanion dont work
Click to expand...
Click to collapse
Wow..... That was a mistake. But however, you should lock your bootloader back, Another thing you can try, BEFORE you search for a way to lock your bootloader is making sure your phone is actually "Unlocked" Sometimes you run a risk when you unlock your bootloader that your phone "Re-Locks" Witch sucks, and is another complete pain in the butt battle. But its the price you pay for not paying complete attention to whats going on. Go through them steps and get back to me.
saying tyvocc
And how to relock it ? can i have a tuto or something ?
i tryed with setools it says : nothing to restore
I have x10i and i have done the bootloader unlock with flashtool, but no matter what sim i put in they can all find networks... but none will allow access to networks no matter what sim. Im from SA and i every time i reboot im asked to insert sim... already have... and on boot please insert simcard and restart. Might i add that i put my wifes vodacom sim in and no luck... i put one of those red voda sims in which is blocked then on boot it is recognised but the sim stops the boot requiring a puk number cause the sim is blocked. But my point is that the sim is noticeably recognised and wont boot the phone further unless puk code inserted. But even so i want the phone open to all networks. I have messed round with s1tool but when it tells me hold control then choose firmware im lost... cause i push control and nada happens. I see there is generic for za and sa and there is a voda sa branded one when i use flashtool to run that. I have used all the sa versions i can see or am aware of... could i be missing something... im using generic world firmware version 2.1 update 1, Kernel 2.6.29, Baseband 2.1.54 and build number 2.1.A.0.435... so what to do?
Sent from S3Terry, Galaxy SIII GTI9300, using 8ta/Telkom Mobile.
How to re-lock a bootloader !!!!!!!
Same problem with me
To re-lock the bootloader you are going to have to download the latest flashtool and use the restore option. In some cases this has helped some people get their network back but in others not.
I am one of the unfortunate ones. I also have an x10i which i have recently aquired from a friend but after upgrading to 2.3.3 it has somehow lost its ability to read any sim card i put in it. There is absolutely no network lock on it at all and i see grey signal bars as if network is there but it never ever registers a sim card and permently stays on emergency calls only.
My phone i do believe was on a contract from t-mobile in germany but if i type *#*#7378423#*#* in to the keypad it quite clearly states that their is no locks on it at all.
I am quite clearly baffled as to why this is happening on an unlocked phone, and if anybody who reads this can help please send me a message
Hi,
the problem is:
I have a galaxy s3 (i9300) which i'm not able to unlock. The *#06# shows the correct IMEI, which is printed on the label behind the battery.
I've tried editing nv_data.bin, but can't seem to find the 00181460 address.
Galaxsim says "unable to load nv data"
The problems started about a month after i upgraded to 4.4.4 (back to n00t rom). One morning the phone just kept saysing 'unfortunately com.android.phone has stopped working'
I tried reflashing it, then tried using cm13.
Everything works fine, except there's now a sim lock on my phone..
running out of ideas, so thought maybe you guys have some fresh ones.
Thanks!
The standard repair-procedure is to flash firmware by Odin.
hello, i have the same problem. i tried lot of rom to solve the problem but it don't do anything. Also flashing firmware by Odin don't work. I'm happy that i'm not alone.
sorry for my bad english.
Hello, have you ever tried to flash the stock firmware with Odin ? For me, it did not solve the problem. If someone has a solution. ..:crying:
The phone is network locked or is the SIM card locked with a pin?
audit13 said:
The phone is network locked or is the SIM card locked with a pin?
Click to expand...
Click to collapse
hi, the phone is network locked.
The only method that may work to unlock the phone for free is the regionlockaway app with root and an older modem.
Was the phone ever network unlocked ?
Thanks for your answer .
Yes, the phone was network unlocked when i bought it.
i tried regionlockaway, but it don't work.
I don't know what to do.
Not sure why the phone would relock. You tried installing a stock rom?
I tried this too, but it don't worked.
I tried to change The modem, the CSC, but nothing happens, the phone remains network locked.
Did you check to make sure the phone was network unlocked when you first got it?
Yes, it was unlocked.
no network after custom rom 4.4.4
Hi all!
I also have the same problem after a cutom Rom install, >no Network, Hope you be of help as i expect XDA always do :angel:
No network is not the same as bein network locked.
If the phone can't be unlocked for free, an unlock code must be purchased.
audit13 said:
No network is not the same as bein network locked.
If the phone can't be unlocked for free, an unlock code must be purchased.
Click to expand...
Click to collapse
My Gt-i9300 shows my sim as it is LycaMobile but also gives me 'Emergency calls only; so i cant call and etc... is there a way to restore it to full stock firmware ? because i also flashed baseband modem etcetera , and ididnt change to Gsm only ( i read somewhere that be a solution...?
Changing to gsm only will only give the phone data access at edge speeds.
To return to stock, flash a rom from sammobile.com using Odin.
I bought an unlocked phone to change operator when i want and i still have to pay ? Oh misery... :'(
cedp974 said:
I bought an unlocked phone to change operator when i want and i still have to pay ? Oh misery... :'(
Click to expand...
Click to collapse
Did you confirm the phone was network unlocked when you first got it? The phone supports your carrier's radio frequencies? SIM card works in another phone?
You can use turbosim for unlock but i dont know what happen to you. Its only suggestion.
You can't network unlock an s3 for free if it has ever been updated to 4.3.
Beamed in by telepathy.