Since I finally updated my device to ICS then rooted it , I was wondering if there's a custom kernel that works with this rom so that I can overclock my device. Sorry If I'm posting in the wrong section.
Just tested kamaraush v2 and it works fine. thanks
Sent from my SK17i using xda premium
I'm using this kernel. It is stock ICS kernel but with a few features
http://forum.xda-developers.com/showthread.php?t=1694027
BudgyN1 said:
I'm using this kernel. It is stock ICS kernel but with a few features
http://forum.xda-developers.com/showthread.php?t=1694027
Click to expand...
Click to collapse
I've used this kernel and it's gr8 but lacks overclocking (because based on the stock kernel of course). Anyway as I said earlier MiniCMSandwich Lite Kernel V2 by Kamarush works gr8.
Sent from my SK17i using xda premium
Related
Currently im using default kernel provided by bboof, can I change it to rage kernel 2.7?and how should I do it?sorry im such a newbie
Sent from my SK17i using XDA
Yes u can. Currently im also on hybromv16, with rage 2.7
If I install the new kernel, will my device to boot properly?or I should reinstall the ROM too??
Sent from my SK17i using XDA
hazard_puppet said:
If I install the new kernel, will my device to boot properly?or I should reinstall the ROM too??
Sent from my SK17i using XDA
Click to expand...
Click to collapse
Your device will be fine, and you don't need to reinstall the ROM.
No. Flashing kernel wont do anything to your installed rom unless stated otherwise by the dev.
bbooff's own kernel, X Kernel and Rage Kernel are currently known to be working with Hybrom.
Install the kernel the same way as you installed your previous kernel(via fastboot).
U guys are great! Tq so much
Sent from my SK17i using XDA
hybrom is the best!
an0nym0us_ said:
Currently im also on hybromv16, with rage 2.7
Click to expand...
Click to collapse
My walkman is also with this combo. Works fine.
Can I use the miui rom by stelios97 with the ics kernel by naa ?
Sent from my E10i using xda premium
No, you have to use the kernel it was built for.
I tryed.. It worked.. but with many bugs.. use support kernel
Hi all I'm from x8 forum,how i can install jelly bean on xperia mini pro(mango).When is it possible the easiest way and step for step guide.Thanks.:fingers-crossed:
http://forum.xda-developers.com/showthread.php?t=1879982
There's no official jb for mango sadly. But there's an unofficial cyanogenmod 10 with some of jelly bean goodies for our device and a lot of ported rom over the dev section.
I recommend for you to take a look for sticky thread regarding flashing custom rom.
Basicly all that you have to do is unlock your bootloader,flash the kernel and flash the rom in clockworkmod.
If you encouter a problem,don't hesitate to ask question. There's a bunch of good folks around here.
Sent from my Xperia Mini Pro using xda app-developers app
http://forum.xda-developers.com/showthread.php?p=27376017
The complete guide
To unlock bootloader or install custom kernel you can also use... This method -
http://forum.xda-developers.com/showthread.php?t=1560613
If you face any difficulties... Just ask or search or PM
Sent via SMULTRON
Which version of cm 10 and kernel works without any bugs and have good stabilitity and smoothness.
przemek4113 said:
Which version of cm 10 and kernel works without any bugs and have good stabilitity and smoothness.
Click to expand...
Click to collapse
It's not like CM10 is fully stable as there are some minor bugs...
Most bugs have been fixed for 2011 devices (see fxp changelog) ... And FXP team is working hard to provide a stable JB:thumbup:
According to my point of view, FXP 147 is the most stable version... With FXP kernel attached in download zip file...
But you can try MESA 2.3 or DDS kernel for a better battery life
Sent via SMULTRON
I tried to download the leatest version and kernel of the rom ,but can't find the links.
Currently I'm using cm10 fxp 147 and kernel. The rom is stable enough for daily use in my opinion. U might consider other extended kernel e.g mesa or dds.
Bugs include front cam not working, soft button light and a couple of people experience bad battery drainage.
Sent from my Xperia Mini Pro using xda app-developers app
przemek4113 said:
I tried to download the leatest version and kernel of the rom ,but can't find the links.
Click to expand...
Click to collapse
https://sites.google.com/site/projectfreexperia/download/cyanogen-mod-10
Sent via SMULTRON
What bugs have this rom,and where can i get the kernel.Is it better than ics cm9 from fxp.
przemek4113 said:
where can i get the kernel.
Click to expand...
Click to collapse
Kernel is included as boot.img file in FXP147 zip
Sent via SMULTRON
I understand but do not need to flash the kernel via flashtool.
U can flash the kernel using flashtool or from the fastboot. Make sure u install all the require driver and then u good to go
Sent from my Xperia Mini Pro using xda app-developers app
przemek4113 said:
I understand but do not need to flash the kernel via flashtool.
Click to expand...
Click to collapse
Yes you have to flash kernel via flashtool... Haven't you ever flashed a kernel in your x8 before... :what:
Sent via SMULTRON
Yes I flashed kernels before the rom installation.
EDIT:Is there any version without any bugs?
przemek4113 said:
Yes
EDIT:Is there any version without any bugs?
Click to expand...
Click to collapse
Sent via SMULTRON
Big thanks to all for help
My kernels for x8 have ftf extension and this kernels have boot img extensions the innstalation is that same?
The kernel extension is .img
Sent from my Xperia Mini Pro using xda app-developers app
sorry my mistikate i know that the kernel extension is img.I would say that the installation is that same like flashing kernel for x8/
Exactly the same
Sent from my Xperia Mini Pro using xda app-developers app
Hi people
I wanted to know how to port a rom that's working on a stock rom to naa's gb kernel
I want to try achtojan's semc debrand engine on naa's gb kernel
please help
Sent from my U20i using Tapatalk 2
SEMC debrand engine, use nAa -14 GB Kernel
Rawwr said:
Hi people
I wanted to know how to port a rom that's working on a stock rom to naa's gb kernel
I want to try achtojan's semc debrand engine on naa's gb kernel
please help
Sent from my U20i using Tapatalk 2
Click to expand...
Click to collapse
I'm not sure what you're asking, but i guess you want to know how to get it working on the stock SE kernel? That is not possible, if you can't unlock your bootloader and use custom kernels you can't use that rom.
SmG67 said:
I'm not sure what you're asking, but i guess you want to know how to get it working on the stock SE kernel? That is not possible, if you can't unlock your bootloader and use custom kernels you can't use that rom.
Click to expand...
Click to collapse
Lol
I already did all that
I meant
Semc debrand engine rom it is for stock kernel
Is there anyway to make it work on naa's gingerbread kernel?
Sent from my U20i using Tapatalk 2
Rempty said:
SEMC debrand engine, use nAa -14 GB Kernel
Click to expand...
Click to collapse
But that is only for stock kernel
Its not working on naa's gb
Is there any way to make it work on naa's gb?
Sent from my U20i using Tapatalk 2
In my opinion it works on nAa -gb-14 too.
Go to main thread
sent via ULTIMATE GB beta
sorry
i mean
xperian blaze v3
here is the link
http://forum.xda-developers.com/showthread.php?t=1644846
Rawwr said:
sorry
i mean
xperian blaze v3
here is the link
http://forum.xda-developers.com/showthread.php?t=1644846
Click to expand...
Click to collapse
As he said only stock kernel.
You can download and install xperia s theme (@ x8 's theme and app thread) ,lockscreen by snip3rboy(I think) ,messaging app, bootanimation, sounds, etc...........
sent via ULTIMATE GB beta
jay-z-s said:
As he said only stock kernel.
You can download and install xperia s theme (@ x8 's theme and app thread) ,lockscreen by snip3rboy(I think) ,messaging app, bootanimation, sounds, etc...........
sent via ULTIMATE GB beta
Click to expand...
Click to collapse
Oh
So
There is noway to port it on naa's gb kernel ?
Sent from my U20i using Tapatalk 2
Rawwr said:
Oh
So
There is noway to port it on naa's gb kernel ?
Sent from my U20i using Tapatalk 2
Click to expand...
Click to collapse
I don't know, it should be ported to nAa kerne, might be hard or easy. Ask the developer for more information
There's another rom which is called "blur " for x8, search for it on x10mini's roms, its really cool & recommended
sent via ULTIMATE GB beta
I want jb in my mini pro so which kenrel is best to flash jb rom??? Help me
Sent from my SK17i using xda app-developers app
3.0.8 nAa kernel
3.4.45 nAa kernel
Sent from my Xperia Mini Pro using xda app-developers app
go for cyanogenmod rom! it has its own kernel. it can be overclocked. everything which you need, it provides
First I don't know what a Kenral or a Kenrel is, so I can't help you
Furthermore if you meant a kernel, you aren't allowed to ask that question. Try some and find your personal best
Sent from my SK17i running stock ics (.587)
Mihahn is right, do your research and try some different kernels.
Thread closed.