[Q]Supercharger on 4.0.4 - Sony Ericsson Xperia Mini, Mini Pro, Xperia Pro, A

Guys, I know that that there is a Q&A thread but i am tired of this and i need help fast. Ok so I flashed the witeJoker ftf then i flashed 7.2.6 sirkay's kernel and then i factory resetted and installed JJ's 3.0 TEST. I ran Tianium backup. Restored the all 120 apps with all data. Ran ScriptManager. And ran teh V6 rc8.2 supercharger script.Then i realised that services jar are not patched. I patched it trough phonewith web app. Downloaded the services.jar restarted and when i ran the script i setted to unledded and i got 100% superchargerd. But wheni play templerun or capture photos with camera360 or browse or use youtube whenihit home there is nothing but wallpaper like its not supercharged. Please i cant go without supercharge. Otherwise i have to go to gingerbread witch sucks

MrTapa said:
Guys, I know that that there is a Q&A thread but i am tired of this and i need help fast. Ok so I flashed the witeJoker ftf then i flashed 7.2.6 sirkay's kernel and then i factory resetted and installed JJ's 3.0 TEST. I ran Tianium backup. Restored the all 120 apps with all data. Ran ScriptManager. And ran teh V6 rc8.2 supercharger script.Then i realised that services jar are not patched. I patched it trough phonewith web app. Downloaded the services.jar restarted and when i ran the script i setted to unledded and i got 100% superchargerd. But wheni play templerun or capture photos with camera360 or browse or use youtube whenihit home there is nothing but wallpaper like its not supercharged. Please i cant go without supercharge. Otherwise i have to go to gingerbread witch sucks
Click to expand...
Click to collapse
Did you wipe dalvik cache...that often fixes unexpected behavior. I am pretty sure that you can do that now....you won't lose any of your apps.....
If you have more than one launcher installed sometimes the supercharger will protect the "wrong" one. So you need to make sure that the launcher you are using is actually the one who's priority is being changed. The output from the supercharger script will tell you which launcher is getting its priorities adjusted. The easiest way to do make sure that the priority of the "right" launcher is being adjusted is to only have 1 launcher installed. Back up and uninstall the unwanted launchers using TB. You can restore them if you change your mind...if you restore APP+Data most of your launcher settings will be restored. Before you do this, make sure that the launcher you want to keep is installed into /system/app.
JJ v3.0 has ROM control which also contains a memory manager that may "readjust" your Supercharger settings. The default LMK in ROM control is 49Mb, whereas unleaded sets it to 28Mb. It looks to me like the ROM control settings run after the 99supercharger init.d script, so you either want to run a Powershift script (you should find these scripts in /sdcard/V6_Supercharger/PowerShift_Scripts) or change the setting in ROM control to 24Mb, so it is more in line with your supercharger settings.
It has been reported on the Supercharger thread that having both zram and the supercharger can cause lags (but I don't remember seeing anything about launcher redraws), so you can try inactivating zram (if it is active)....I have not experienced any problems with having them both active.
So the default priority of the launcher is +6 in ICS, so it is pretty easy for it to get killed by the android memory manager. The supercharger should make it Hard-to-Kill which changes the priority to +1. If you are sure that everything is set up correctly and you are still getting launcher redraws...then bullet proof the launcher (it is one of the options in the supercharger script). This will make the priority of the launcher -16!!!! So it will be the last thing killed by the android memory manager. If you do this and the launcher is still getting wiped out then something else is going on.
If you are like me....you will be tempted to bullet proof a whole bunch of apps....don't! Once you run a bullet proof app it will tend to stay in memory (cause the android memory manager won't kill it)...soon your memory will fill up with bullet proof apps and the performance of your phone will be soooooo slow!

justmpm said:
Did you wipe dalvik cache...that often fixes unexpected behavior. I am pretty sure that you can do that now....you won't lose any of your apps.....
If you have more than one launcher installed sometimes the supercharger will protect the "wrong" one. So you need to make sure that the launcher you are using is actually the one who's priority is being changed. The output from the supercharger script will tell you which launcher is getting its priorities adjusted. The easiest way to do make sure that the priority of the "right" launcher is being adjusted is to only have 1 launcher installed. Back up and uninstall the unwanted launchers using TB. You can restore them if you change your mind...if you restore APP+Data most of your launcher settings will be restored. Before you do this, make sure that the launcher you want to keep is installed into /system/app.
JJ v3.0 has ROM control which also contains a memory manager that may "readjust" your Supercharger settings. The default LMK in ROM control is 49Mb, whereas unleaded sets it to 28Mb. It looks to me like the ROM control settings run after the 99supercharger init.d script, so you either want to run a Powershift script (you should find these scripts in /sdcard/V6_Supercharger/PowerShift_Scripts) or change the setting in ROM control to 24Mb, so it is more in line with your supercharger settings.
It has been reported on the Supercharger thread that having both zram and the supercharger can cause lags (but I don't remember seeing anything about launcher redraws), so you can try inactivating zram (if it is active)....I have not experienced any problems with having them both active.
So the default priority of the launcher is +6 in ICS, so it is pretty easy for it to get killed by the android memory manager. The supercharger should make it Hard-to-Kill which changes the priority to +1. If you are sure that everything is set up correctly and you are still getting launcher redraws...then bullet proof the launcher (it is one of the options in the supercharger script). This will make the priority of the launcher -16!!!! So it will be the last thing killed by the android memory manager. If you do this and the launcher is still getting wiped out then something else is going on.
If you are like me....you will be tempted to bullet proof a whole bunch of apps....don't! Once you run a bullet proof app it will tend to stay in memory (cause the android memory manager won't kill it)...soon your memory will fill up with bullet proof apps and the performance of your phone will be soooooo slow!
Click to expand...
Click to collapse
Yeah i know all of these stuff. I am not a noob in thisstuff soo.... Anyway when i changed kernel the problem is fixed. WTF. No one knows why but, anyway i am now using RAM Manager Pro ithas an option to lock launcher in memory so this works perfectlyand on thekerneli used before But anyway thanks

MrTapa said:
Yeah i know all of these stuff. I am not a noob in thisstuff soo.... Anyway when i changed kernel the problem is fixed. WTF. No one knows why but, anyway i am now using RAM Manager Pro ithas an option to lock launcher in memory so this works perfectlyand on thekerneli used before But anyway thanks
Click to expand...
Click to collapse
nwm....answering questions like yours is always hard because you don't know what the other person knows...and nobody knows everything...except maybe Sirkay.....have you tried to Smurf Out your phone (http://forum.xda-developers.com/showthread.php?t=1517632), it will also protect your launcher and you won't have to add another app...is that 201 now?

The app is perfect men I think the smurph script will mess up thing( well i can remove Ram Manager pro but.
RULE #1: NEVER REPLACE A THING THAT IS WORKING PERFECKTLY xD(well that goes for windows but .... )

Lol. I hate messing up with script especially that i change rom frequently. I tried ram manager pro and it is working great. I cant believe it. It works with my current kernel where init.d script is not supported. Can you tell me if this app requires init.d at the first place?
Sent from my ST18i using Tapatalk 2

MrTapa said:
The app is perfect men I think the smurph script will mess up thing( well i can remove Ram Manager pro but.
RULE #1: NEVER REPLACE A THING THAT IS WORKING PERFECKTLY xD(well that goes for windows but .... )
Click to expand...
Click to collapse
hey mrtapa, have you tried that smurf on JJ's v3.0 ROM and sirkay's v7.2.6 kernel? How is it?

idareyoutoclickthis said:
Lol. I hate messing up with script especially that i change rom frequently. I tried ram manager pro and it is working great. I cant believe it. It works with my current kernel where init.d script is not supported. Can you tell me if this app requires init.d at the first place?
Sent from my ST18i using Tapatalk 2
Click to expand...
Click to collapse
Well idont see a script made by ROM Manager pro in int.d so it doesnt require with is fjikin awesome xD

Paul Mortel said:
hey mrtapa, have you tried that smurf on JJ's v3.0 ROM and sirkay's v7.2.6 kernel? How is it?
Click to expand...
Click to collapse
You dont need it dude xD.(if you only wanna lock launcehr in memory i havent tryed it cuz i dont need it ;P

justmpm said:
nwm....answering questions like yours is always hard because you don't know what the other person knows...and nobody knows everything...except maybe Sirkay.....have you tried to Smurf Out your phone (http://forum.xda-developers.com/showthread.php?t=1517632), it will also protect your launcher and you won't have to add another app...is that 201 now?
Click to expand...
Click to collapse
why me? gggrrrr im no expert in this things. all i know is, mine never had launcher redraw. i just did fresh install ics 4.0.4 repacked and couples of init.d script. and...Bamm! working gr8 with 210mb free fram (of course after kill unnecessary bckground processes)
Sent from my ST18i using xda premium

sirkay said:
why me? gggrrrr im no expert in this things. all i know is, mine never had launcher redraw. i just did fresh install ics 4.0.4 repacked and couples of init.d script. and...Bamm! working gr8 with 210mb free fram (of course after kill unnecessary bckground processes)
Sent from my ST18i using xda premium
Click to expand...
Click to collapse
Well only he thinks that maybe. And yes all of you don't use ur ray to the max like me. Like I want my phone ro be smooth, to be perfect at hd gaming, to be fast, to use it instead of my DSLR xd(true).To have perfect hq audio (2400 all 320kbs songs. And to don't have redraws etc.I have 32 gb sd card and I habe 800mb free on it I have 120 apps with data that I have 20 different camera apps and I need backed up in titanium backup. So maybe no one uses my phone lile I so. And still my phone os not perfect. U will say like get samsung galaxy s3 or phone like that. Well se xperia ray is the only powerfully small smartphone
And as long as I am a kid I don't need big phones
Sent from my ST18i using XDA

sirkay said:
why me? gggrrrr im no expert in this things. all i know is, mine never had launcher redraw. i just did fresh install ics 4.0.4 repacked and couples of init.d script. and...Bamm! working gr8 with 210mb free fram (of course after kill unnecessary bckground processes)
Sent from my ST18i using xda premium
Click to expand...
Click to collapse
coz' you must be the most under appreciated developer in the history of xda....

MrTapa said:
Guys, I know that that there is a Q&A thread but i am tired of this and i need help fast. Ok so I flashed the witeJoker ftf then i flashed 7.2.6 sirkay's kernel and then i factory resetted and installed JJ's 3.0 TEST. I ran Tianium backup. Restored the all 120 apps with all data. Ran ScriptManager. And ran teh V6 rc8.2 supercharger script.Then i realised that services jar are not patched. I patched it trough phonewith web app. Downloaded the services.jar restarted and when i ran the script i setted to unledded and i got 100% superchargerd. But wheni play templerun or capture photos with camera360 or browse or use youtube whenihit home there is nothing but wallpaper like its not supercharged. Please i cant go without supercharge. Otherwise i have to go to gingerbread witch sucks
Click to expand...
Click to collapse
I think you should read this thread first: http://forum.xda-developers.com/showthread.php?t=1556013
2 things if you want get 100% Supercharge, fix SU segment fault issue and install busy box 1.9.4 wraitdhu from Supercharger Stater Kit. And last thing u should use the latest script, RC9 T16.
Sent from my naughty Xperia Ray.

alexlaveline said:
I think you should read this thread first: http://forum.xda-developers.com/showthread.php?t=1556013
2 things if you want get 100% Supercharge, fix SU segment fault issue and install busy box 1.9.4 wraitdhu from Supercharger Stater Kit. And last thing u should use the latest script, RC9 T16.
Sent from my naughty Xperia Ray.
Click to expand...
Click to collapse
Thank you but I have already found a solution soo!? !?
Sent from my ST18i using XDA

Related

[Q] how to maximize the working x10 other than JIT and delete some junk app?

my sony x10 too laggy when i use live wallpaper, does anyone knows about the optimize x10 with .apk? like one click lag fix on SGS ?
Usually it will lag until it caches everything, then with time it will only get better, JIT helps as well but some of who used it faced battery problems ( I was one of them ) having 7 hours of battery life, however with time I noticed a huge improvement as my X10i now can go more than 20 hours with live wallpaper ( beautiful weather live wallpaper ) and JIT.
you can un-install Timescape and all of its components as it improves your device performance a lot
MJ_QaT said:
Usually it will lag until it caches everything, then with time it will only get better, JIT helps as well but some of who used it faced battery problems ( I was one of them ) having 7 hours of battery life, however with time I noticed a huge improvement as my X10i now can go more than 20 hours with live wallpaper ( beautiful weather live wallpaper ) and JIT.
you can un-install Timescape and all of its components as it improves your device performance a lot
Click to expand...
Click to collapse
wew... i cant delete timescape, bcoz my x10 will lose quarantee...
dacihappymaker said:
wew... i cant delete timescape, bcoz my x10 will lose quarantee...
Click to expand...
Click to collapse
you can always re-flash it to the original state and gain the warranty again
It's you choice in the end, but many people are doing that.
You can backup timescape before un-installing it, similar to what I did, so whenever I wanted it back all I have to do is restore it
MJ_QaT said:
you can always re-flash it to the original state and gain the warranty again
It's you choice in the end, but many people are doing that.
You can backup timescape before un-installing it, similar to what I did, so whenever I wanted it back all I have to do is restore it
Click to expand...
Click to collapse
Used freeze to Timescape, but haven't see a big difference
Use minfreemanager, what will force android to free up more memory(mine about 70MB always free).
It's like a task manager, but the droid's default one. Mine is a little smoother, what's really good
Search on the market, install, and open link what it shows for details
Adolf1994 said:
Use minfreemanager, what will force android to free up more memory(mine about 70MB always free).
It's like a task manager, but the droid's default one. Mine is a little smoother, what's really good
Search on the market, install, and open link what it shows for details
Click to expand...
Click to collapse
Actually you want Android to use as much RAM as possible. If you keep forcing it to free up RAM it will make things worse. Let the OS do its job people! This is not Windows!
can you video how to install JIT app? i have rooted my x10 with Z4root
rogem_kk said:
Actually you want Android to use as much RAM as possible. If you keep forcing it to free up RAM it will make things worse. Let the OS do its job people! This is not Windows!
Click to expand...
Click to collapse
Actually there are ppl around here with ~120MB free limit with no problem. As the app have presets I use those instead of set an insane limit. And Android itself is what wipe apps from RAM, so it's not like the Windoze
The Aggressive preset means ~65MB and this is still better than default ~28MB
dacihappymaker said:
wew... i cant delete timescape, bcoz my x10 will lose quarantee...
Click to expand...
Click to collapse
Pretty newbie
You need to combine several stuff to make your phone much more efficient :
- Delete all apps you don't need : all useless keyboards, Face Recognition (big eater), MediaScape, TimeScape, Playnow, all useless widgets ... using Root Explorer
- Use autokiller in strict mode (example), it will free up ram
- You may use Setcpu to max performance when you need (remember it will drains you battery like black hole !!)
- Use startup auditor to block unwanted processes
- Use Android System Info to monitor running processes and kill memory/cpu eaters once you don't use them anymore
- Avoid use of widgets
where i can download root explorer? i cant find it in the market...
please give me video "how to install JIT"

[?] [Script] V6 SuperCharger !! HTK & BulletProof Launchers! FIX MEMORY FOR ALL ANDRO

[?] [Script] V6 SuperCharger !! HTK & BulletProof Launchers! FIX MEMORY FOR ALL ANDRO
so far nobody has mentioned this, not even sure how many people look in this section of the forums, but here goes.
anyone out there willing to test and port this over for fascinate?
http://forum.xda-developers.com/showthread.php?t=991276
general info:
Main points:
- CUST-OOMIZER! Use your settings without Autokiller Memory Optimizer or Auto Memory Manager!
- For newer phones with lots of ram, use the 3rd slot to set how much free ram you want.
- If you have /system/etc/rootfs/init.mapphone_umts.rc, it makes a backup and edits that single file. This is nice and tidy.
... Thank to kabaldan for pointing out the importance of certain things.
- Most Custom ROMs - If you have a /system/etc/init.d folder, it creates 99SuperCharger in there and edits /data/local.prop (20 entries added for adjusting priorities and groupings). You shouldn't need to configure anything else.
- Stock ROMs - If you have neither, it creates /data/99SuperCharger.sh which you can load up on boot (run as root) with Script Manager. The OOM groupings work as well since it happens on boot in local.prop (20 entries added)
Note: For some reason, the minfree levels do not stick on some Custom ROMs. I don't know why this is. Maybe a bug in GingerBread?
........ If this happens to you, use Script Manager to load /system/etc/init.d/99SuperCharger "on boot" and "run as root"
In case of any error, you will find a related help file in the root of your SD card.
So... I think this covers ANY Android ROM
It also determines if you're using Script Manager and gives appropriate information/tips/help files depending on what other factors are present.
The above is really ALL YOU NEED TO KNOW.
The V6 SuperCharger script does everything!
Anything below is extra info!
It's just a single file... 806 lines (807 if you count the blank line at the end LOL)
So... What's it do?
It makes your phone FAST... super snappy with better multitasking!
If you read between the red lines below (parts 1-3), you'll see that at first it was only about minfrees and launcher redraw.
But after installing GingerBread, I saw that it needed more work than Froyo LOL.
Groupings were ALL MESSED UP and made NO SENSE to me whatsoever...
So I figured out how to group them more like CM6 (Froyo) but that still wasn't good enough...
I further rearranged the OOM Groupings and Priorites and lowmemorykiller values for a...
COMPLETE MEMORY MANAGEMENT FIX!
That's basically what this is
Faster than ever, no launcher redraws, multitasking is better... why?
Because it works with the lowmemorykiller and letting it work the way it's meant to work.
Also, because of the rearrangement, it works the same on all roms!
The problem with using minfree tweakers like AMM or AKMO is that it doesn't work the same on all roms.
Secondary apps may be in slot 3 on some roms but in slot 5 in others!
That's why you hear people comment "I tried AKMO but it didn't do anything..."
Most likely it didn't do anything because the apps weren't sitting where they were expected to be.
Upon installation, V6 SuperCharger will first clean up any previous supercharging so none of your files get cluttered.
But if you toggle between Hard To Kill and BulletProof launchers, the memory adjustments aren't affected.
So you can leave your minfrees at stock/default settings and apply the Hard To Kill Launcher and still get the OOM Grouping/Priority fixes.
So if you love your ROMs memory settings, just try the HTK Launcher/OOM Fix... you won't regret it
Ah, I used this script on my wife's Eris, and it did fix the speed a tad, no clue how it would react on an already fast phone, but hell, any little bit helps.
Izeltokatl said:
so far nobody has mentioned this, not even sure how many people look in this section of the forums, but here goes.
anyone out there willing to test and port this over for fascinate?
http://forum.xda-developers.com/showthread.php?t=991276
general info:
Main points:
- CUST-OOMIZER! Use your settings without Autokiller Memory Optimizer or Auto Memory Manager!
- For newer phones with lots of ram, use the 3rd slot to set how much free ram you want.
- If you have /system/etc/rootfs/init.mapphone_umts.rc, it makes a backup and edits that single file. This is nice and tidy.
... Thank to kabaldan for pointing out the importance of certain things.
- Most Custom ROMs - If you have a /system/etc/init.d folder, it creates 99SuperCharger in there and edits /data/local.prop (20 entries added for adjusting priorities and groupings). You shouldn't need to configure anything else.
- Stock ROMs - If you have neither, it creates /data/99SuperCharger.sh which you can load up on boot (run as root) with Script Manager. The OOM groupings work as well since it happens on boot in local.prop (20 entries added)
Note: For some reason, the minfree levels do not stick on some Custom ROMs. I don't know why this is. Maybe a bug in GingerBread?
........ If this happens to you, use Script Manager to load /system/etc/init.d/99SuperCharger "on boot" and "run as root"
In case of any error, you will find a related help file in the root of your SD card.
So... I think this covers ANY Android ROM
It also determines if you're using Script Manager and gives appropriate information/tips/help files depending on what other factors are present.
The above is really ALL YOU NEED TO KNOW.
The V6 SuperCharger script does everything!
Anything below is extra info!
It's just a single file... 806 lines (807 if you count the blank line at the end LOL)
So... What's it do?
It makes your phone FAST... super snappy with better multitasking!
If you read between the red lines below (parts 1-3), you'll see that at first it was only about minfrees and launcher redraw.
But after installing GingerBread, I saw that it needed more work than Froyo LOL.
Groupings were ALL MESSED UP and made NO SENSE to me whatsoever...
So I figured out how to group them more like CM6 (Froyo) but that still wasn't good enough...
I further rearranged the OOM Groupings and Priorites and lowmemorykiller values for a...
COMPLETE MEMORY MANAGEMENT FIX!
That's basically what this is
Faster than ever, no launcher redraws, multitasking is better... why?
Because it works with the lowmemorykiller and letting it work the way it's meant to work.
Also, because of the rearrangement, it works the same on all roms!
The problem with using minfree tweakers like AMM or AKMO is that it doesn't work the same on all roms.
Secondary apps may be in slot 3 on some roms but in slot 5 in others!
That's why you hear people comment "I tried AKMO but it didn't do anything..."
Most likely it didn't do anything because the apps weren't sitting where they were expected to be.
Upon installation, V6 SuperCharger will first clean up any previous supercharging so none of your files get cluttered.
But if you toggle between Hard To Kill and BulletProof launchers, the memory adjustments aren't affected.
So you can leave your minfrees at stock/default settings and apply the Hard To Kill Launcher and still get the OOM Grouping/Priority fixes.
So if you love your ROMs memory settings, just try the HTK Launcher/OOM Fix... you won't regret it
Click to expand...
Click to collapse
I don't think this will work with the fascinate "If you have /system/etc/rootfs/init.mapphone_umts.rc"... the fascinate is CDMA. This will only work with AT&T or T-mobile as they are UMTS
vudiff said:
I don't think this will work with the fascinate "If you have /system/etc/rootfs/init.mapphone_umts.rc"... the fascinate is CDMA. This will only work with AT&T or T-mobile as they are UMTS
Click to expand...
Click to collapse
but it does work on the HTC Eris, which is on the Verizon network??
http://forum.xda-developers.com/showpost.php?p=11178955&postcount=2
vudiff said:
I don't think this will work with the fascinate "If you have /system/etc/rootfs/init.mapphone_umts.rc"... the fascinate is CDMA. This will only work with AT&T or T-mobile as they are UMTS
Click to expand...
Click to collapse
and if you have an init.d folder and if not it uses data folder.
It won't work on ipods tho
Izeltokatl said:
but it does work on the HTC Eris, which is on the Verizon network??
http://forum.xda-developers.com/showpost.php?p=11178955&postcount=2
Click to expand...
Click to collapse
Yes it is on verizon's network. I'm guessing that file isn't doing anything on CDMA phones.
I'm not a dev but I do know my networks. I work for Alcatel-Lucent in which we translate & make the cell cabinet,towers, & customer networks communicate. We are the people that brought you verizons 3g & LTE technology. Currently working on AT&T's UMTS & LTE networks. Yes i am the inside inside man. We provide the Base Station and most routers and make them communicate for the providers... Sprint, verizon/alltel, nTelos, cricket, metroPCS, etc...
http://www.youtube.com/watch?v=7V74huEaaf4
Ya but can you read instructions?
And what's that got to do with oom groupings, priorities, minfrees home launcher and androids lowmemorykiller?
Sent from my Milestone Powered by my V6 SuperCharger
zeppelinrox said:
Ya but can you read instructions?
And what's that got to do with oom groupings, priorities, minfrees home launcher and androids lowmemorykiller?
Sent from my Milestone Powered by my V6 SuperCharger
Click to expand...
Click to collapse
Wow... chill out dude. I saw umts at the end of the file and simply was just saying that these phones are cdma. I already said I'm not a dev. Comments like yours make people not even want to comment. I'm not new to roms, rooting, etc... I started out with the original droid, then D2 and I've had the fascinate ever since it came out. Rooted & started out with superclean when it became available. Geeze
Yes well in post 5 I pointed out that it also looks for the init.d folder and if not an alternative method by using the data folder.
Has nothing to do with networks.
It has to do with which file or method is used to implement the tweaks depending on what options are available.
zeppelinrox said:
Yes well in post 5 I pointed out that it also looks for the init.d folder and if not an alternative method by using the data folder.
Has nothing to do with networks.
It has to do with which file or method is used to implement the tweaks depending on what options are available.
Click to expand...
Click to collapse
OK got ya. I didn't mean to start an argument! Sorry that I misunderstood. I learned something new today... and thank you for breaking it down for me
Ah that's ok...
Btw... cool job lol
Sent from my Milestone Powered by my V6 SuperCharger
Yeah I tried this on a friends Fascinate and it dropped dead, wouldnt boot up.
Had to Odin up and restore back to stock.
I noticed my friends swype keyboard would lag even after restore back to stock.
thus the reason to try this script in the first place.The fasciante is decent lil bugger.
Its too bad I sing its praises on Evo thought, it really kicks butt.
im using this right now on my fascinate running miui 1.9.9 and its working flawlessly... three 3g tweak also works great. thanks zeppelinrox
It works with the fascinate, I use it constantly, and it doesn't need to be ported, the author stated it should work on nearly any device/ROM setup. Just get Script Manager app from the market, open app, go to settings, browse as root, then run the V6 script. It will give instructions as it runs.
Sent via Morse code.
Just ran the script last night, while it took me a while to fidget with it and figure out what option was best for me I can't believe that cm7 could be any smoother but there is a definite difference after running the script, with no lag, or home screen redraw, my phone is as smooth if not smoother at 1GHz.then it was at 1.5GHz before the script...just want to say it was painless easy and really made a huge difference...thanks a lot!
On a side note the battery calibration that was linked in the op does seem to work but I had to figure out when to pull the battery since the original instructions where on the milestone, either way great job and thanks again, I'll run this script after any rom I go to from here on out!
Sent from my SCH-I500 using XDA App
efan450 said:
Just ran the script last night, while it took me a while to fidget with it and figure out what option was best for me I can't believe that cm7 could be any smoother but there is a definite difference after running the script, with no lag, or home screen redraw, my phone is as smooth if not smoother at 1GHz.then it was at 1.5GHz before the script...just want to say it was painless easy and really made a huge difference...thanks a lot!
On a side note the battery calibration that was linked in the op does seem to work but I had to figure out when to pull the battery since the original instructions where on the milestone, either way great job and thanks again, I'll run this script after any rom I go to from here on out!
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I ran it last night as well. I cannot really tell a difference. What setting are you running?
Option 8 and then option 12, set to browse root, and run as root in the first config screen...afterwords reboot and run option 1...it will tell you if your home screen was easy to kill or not and gives you a list of minfrees...I had to downgrade my busy box to 1.18.2.to get everything working
Edit: I used script manager to run the script and then put the widget on my home screen to easily access it...if you run option 1 and it says your home screen is bullet proof then it did work...I seem to get much better 3g connectivity and better download speeds.
Sent from my SCH-I500 using XDA App

[Q] How to correct long startup times?

Hi, I have an AT&T atrix running the CherryPi ROM with stock kernel and I have been overall very happy with it aside from two kinks.
1. Boot time is very long (over a minute and half) despite having bloatware frozen and startup apps cut to a minimum.
2. I can't receive MMS messages at all.Never mind.
I'm not all that concerned with MMS, but I've been considering installing Faux's kernel in hopes of a performance boost. I don't really want to overclock, though. I fixed this with some APN changing... Still ridiculous that I went months without MMS though.
Could my ROM be at the root of my problems?
If not, what kind of a performance gain would I be able to get with the optimized 1ghz kernel?
Would I have to wipe any data to install a different kernel? I answered this one myself.
Thanks.
Edit: I installed the kernel (wiped cache and dalvik cache) and further cleaned on bloatware, still taking over a minute to boot.
All this points me to a new/final question. Would CM7 yield a significant performance boost (say, boot times under 1 minute) without overclocking? It did absolutely. I installed CM7 and Faux's stopgap 1ghz kernel (which did say something about EXT4), my phone now boots in 20 seconds. That's over a minute of improvement from what I originally had. Topic can be closed/marked as solved.
Format your Rom to ext4 and it will increase speed
http://forum.xda-developers.com/showthread.php?t=1282691
Thanks for the information!
I'm downloading the fingerprint scanner enabled CM7 and doing a fresh install of everything. Would this script have any wonky side effects? I am a noob to android, but not to partitioning and filesystems. I've never seen a conversion go well that wasn't FAT16 to NTFS....
Edit: Installed CM7. It's so fast, it has so many features that I have been wanting. Wow is all I can say lol.
Id like to know what I can do about this on my stock gb only rooted atrix. I don't want to unlock my bootloader or use any custom roms. My startup time is about 4 1/2 to 5 minutes from time I press power button to time everything is loaded. I have not uninstalled any bloat but have frozen all social apps and authenticators and live wallpapers. Any ideas?
Sent from my MB860 using XDA App
In order to make it Ext 4 you have to have bootloader unloked and rooted.firat install the rom or if you already have its ok too.flash faux 123 kernels(any of them you want)
Go to cwm(it better to use RomRacers latest) and wipe cache and dalvik.
Do a nandroid backup for good measure.
Once this is done you install the ext4 script zip and that's it.
Reboot and check it out.if you get FCs then uninstall the apps that are force closing and go to cwm and fix permissions,then reinstall apps.
this makes your phone realky nice and fast,honestly I didn't have any apps force closing you have to follow the directions in the thread.
You will see your nandroid backup was ext3 and now you're ext4
If you decide later on to wipe dalvik or chache it might revert it back to ext3 if so just simply run the scrip zip again hope it helped
There is a root app called Autostarts that I think you will find useful.
WiredPirate said:
There is a root app called Autostarts that I think you will find useful.
Click to expand...
Click to collapse
Optimize Toolbox works great also. Just that in the latest version the language is not English anymore, (should get updated sometime to fix this). Lucky I remember what all the icons do and can use it blind! Finding an older version of this app in English will work.
The most current "lite" version is in English. It doesn't have the auto optimizer, but you can still manage autostart apps and log boot times.
(I'm thrilled, by the way, CM7 is booting in 19 seconds with all of my old apps restored. This is like having a brand new phone. We can mark this as solved on my part.)
WiredPirate said:
There is a root app called Autostarts that I think you will find useful.
Click to expand...
Click to collapse
Im cautious to pay for an app that im unsure of and never used. Wish I could try it first.
Sent from my MB860 using XDA App
pre4speed said:
Im cautious to pay for an app that im unsure of and never used. Wish I could try it first.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
I can understand that for sure. It does do exactly what it says and works great on the Atrix. But like was pointed out above there are other apps that do the job and potentially w/o the price tag, I just haven't used them and so I can't speak on them. I would try to get the English version of the app that was mentioned and see if that works first (if it's a free app?..)
WiredPirate said:
I can understand that for sure. It does do exactly what it says and works great on the Atrix. But like was pointed out above there are other apps that do the job and potentially w/o the price tag, I just haven't used them and so I can't speak on them. I would try to get the English version of the app that was mentioned and see if that works first (if it's a free app?..)
Click to expand...
Click to collapse
I have Autostarts also, and it does in fact work as stated. I have just come to like Optimize Toolbox instead, and yes, it's free.
The biggest reason I never gave OT a try is cause there are 4 dif versions of it in the market and also because the cover art used to be not in English, and now that I know the app itself isn't in English either I'm even more turned off of it. However I know it is a popular app cause it was requested for the root apps list and I added it. I guess I'm just too ethnocentric to get past the whole developed in a dif language thing..

[Q] Keeping app in memory

Normally when I run into issues, I google them or find answers all over the interweb or older threads. But this time, I've ran into a wall. I just flashed the Infinity rom by Nims and it comes with Lagfree and TurboBoost preinstalled. Phone runs smoothly as hell even when clocked at 480. Now the problem is, it kills random apps to free up RAM. Including HeyWire and WhatsApp which I need and use a lot.
Is there a way to exclude them from getting killed? I honestly don't know what to do this time since its not a task killer and I can't put them on exclude.
This might not help, but why not adjusting the minfree values?
Nitro Lag Nullifier......might help or not .
Herpderp Defy.
EmoBoiix3 said:
Nitro Lag Nullifier......might help or not .
Herpderp Defy.
Click to expand...
Click to collapse
Isn't that another script? The Infinity rom already comes preloaded with LagFree and TurboBoost. Won't more scripts mess up performance?
It's a feature in V6 supercharger by zeppelinrox
Sent from my Galaxy Ace on Ice Cream Sunday Final
The Nitro Lag Nullifier just uses build.prop and init.rc
Herpderp Defy.
Lucky you got the replies.. I asked same question some days before. I searched internet a lot. But found Google didn't provide such a facility in it's APIs. Activity Stack in Android is automatically handled, can't be altered by APP. If it'd possible. Imagine What would happen when some n00b locks all apps in his Android device!
Here all you can do is, reduce the priority how frequent your app should be killed. In other words, exactly what adeklipse said.
Rushyang said:
Lucky you got the replies.. I asked same question some days before. I searched internet a lot. But found Google didn't provide such a facility in it's APIs. Activity Stack in Android is automatically handled, can't be altered by APP. If it'd possible. Imagine What would happen when some n00b locks all apps in his Android device!
Here all you can do is, reduce the priority how frequent your app should be killed. In other words, exactly what adeklipse said.
Click to expand...
Click to collapse
Yeah. That's why I decided to ask. I rarely do. I solve all my stuff by my self and ask questions when I reach walls like these. But as for the minfree values, since they're scripts (Lagfree & Turboboost) can it be edited?
What if I delete the scripts and install Ram Manager instead? That app from the XDA developer. Anyone knows if its gonna be the same performance?
SuperAce609 said:
But as for the minfree values, since they're scripts...
Click to expand...
Click to collapse
Where did you hear that? MinFree are the "values" not the "Scripts". For "very" elaborated info I'd say google it. And Since they are values, the changes will be reverted automatically by the init.rc call in your boot image at the boot time of your phone, until and unless you set them to load itself on boot time by app like "MinFree Manager". I have used "MinFree Manager" app & that app itself said if anything goes wrong, reboot should restore back the values.
SuperAce609 said:
What if I delete the scripts and install Ram Manager instead? That app from the XDA developer. Anyone knows if its gonna be the same performance?
Click to expand...
Click to collapse
I have been using RAM Manager & what I observed is, it changed permanently the way android handled the RAM. Even if you reboot, the changes were there. & it "really" did what it said. I changed the way it handled the RAM frequently.
Rushyang said:
Where did you hear that? MinFree are the "values" not the "Scripts". For "very" elaborated info I'd say google it. And Since they are values, the changes will be reverted automatically by the init.rc call in your boot image at the boot time of your phone, until and unless you set them to load itself on boot time by app like "MinFree Manager". I have used "MinFree Manager" app & that app itself said if anything goes wrong, reboot should restore back the values.
I have been using RAM Manager & what I observed is, it changed permanently the way android handled the RAM. Even if you reboot, the changes were there. & it "really" did what it said. I changed the way it handled the RAM frequently.
Click to expand...
Click to collapse
No, no, no. I meant since they're scripts, meaning LagFree and TurboBoost. And about ram manager, is it safe to assume I can uninstall the 2 scripts and replace them with that app? Do you think performance will be the same? Lol I'm sorry I'm asking so much. These scripts came preloaded with the rom and even when I flashed them manually in ICS Final, they didn't work this good by freeing so much ram.
About to just make a backup, delete them and install ram manager.
SuperAce609 said:
No, no, no. I meant since they're scripts, meaning LagFree and TurboBoost. And about ram manager, is it safe to assume I can uninstall the 2 scripts and replace them with that app? Do you think performance will be the same? Lol I'm sorry I'm asking so much. These scripts came preloaded with the rom and even when I flashed them manually in ICS Final, they didn't work this good by freeing so much ram.
About to just make a backup, delete them and install ram manager.
Click to expand...
Click to collapse
I am always kinda thrifty in applying these mods cause I know I "have to" use my SGA for long time. What I always felt insecure about was kernels. So I haven't flashed any custom kernels ever. & therefore, I have not tried those scripts either. So I can't tell you difference between them and RAM manager's performance. But what I assume, deleting scripts and just trying RAM Manager's performance wouldn't hurt you, if you've gone this far.. would it? Share your experience here.
Rushyang said:
I am always kinda thrifty in applying these mods cause I know I "have to" use my SGA for long time. What I always felt insecure about was kernels. So I haven't flashed any custom kernels ever. & therefore, I have not tried those scripts either. So I can't tell you difference between them and RAM manager's performance. But what I assume, deleting scripts and just trying RAM Manager's performance wouldn't hurt you, if you've gone this far.. would it? Share your experience here.
Click to expand...
Click to collapse
Yeah, I did it. But I left some files from the TurboBoost script for the touchscreen. It was acting like its old self without it so I flashed it again and left some files. That's the only mod I have on my phone.
Got Ram Manager set on Balance (Multi Task). Working great for now. Haven't found any problems

[Guide] Best performance you can get without a Custom ROM (FSYNC OFF AND MORE!)

The point of this thread is to put together a list of optimizations that can be done on the stock rom with root access. I figured there would be others like me who can't unlock (or don't want to) but now can root who might be interested and all contributions will be added.
At the end of this the Prime feels much faster. I think most of it can work for the TF300 and TF700 too. Thanks to so many out there who make this possible and I appreciate all feedback in comments.
NOTE: This involves rooting your device and doing dangerousish stuff. I am not responsible if your Prime softbricks or if you have trouble installing updates. If you mess up and it softbricks you might lose all your data on the Prime. My official answer to updates is that every step has backups or checkboxes, so just undo everything after the pre-amble before you update.
If a tweak is done wrong and you can't boot, unbrick via these directions (data will be lost!):
Download latest firmware from Asus site.
Unzip this file once - it contains a zip inside it. Rename this zip to EP201_SDUPDATE.ZIP
Copy the file to the root of a FAT32 formatted MicroSD card
Turn the tablet off via the power button.
Now turn it on holding down the Volume Down button on the tablet
In a minute you will be in the recovery screen. Hit volume up.
Wait for it to get done. It can take a while.
Pre-Amble:
First thing, update to the newest Jellybean Asus has given us and root it using this method (thanks Morlok8k and djrbliss and sorry again Morlok8k).
Install Voodoo OTA Rootkeeper and protect that root:
https://play.google.com/store/apps/details?id=org.projectvoodoo.otarootkeeper
Install Quick boot to get an easy way to reboot:
https://play.google.com/store/apps/...medium=appbrain_web&utm_campaign=appbrain_web
Now lets optimize:
1. Get Rid of Bloat (Undo this step before installing updates)
Use Titanium or the built in disable function under settings to freeze some of the apps. This gets back a lot of your RAM and cuts down on the boot time. Here is what I have disabled/frozen (don't disable something you use), but note some can only be disabled with Titanium:
@vibe fun center
App Backup
App Locker
Asus Email (I don't use it)
Asus FAcebook Poster
Asus MyZine
Asus Sync
Asus Weather
com.asus.pcsynclauncher
com.asus.quicksearch
com.asus.youtube search
Email
Exchange Services
Google Play Books
Google Play Movies and TV
MyCloud
MyDesktop
MyDictionary
MyLibrary
Nvidia Glowball Demo Installer
Street View
Supernote
Talkback
Webstorage
Zinio
Click to expand...
Click to collapse
2. Install an Ad blocker.
My choice is Adaway:
https://code.google.com/p/ad-away/
This will speed up browsing.
3. Disable FSYNC
(HUGE PERFORMANCE BOOST BUT SOFTBRICK RISK IF YOU DO IT WRONG)
First of all, before we get started know that disabling FSYNC has some risks. But its the single biggest tweak you can do. Will let you update or install apps and still do something else.
Secondly, please go here and thank eminent1410 for inadvertently fixing our Primes. He did it for his OPTIMUS Z ROM but we benefit!
http://forum.xda-developers.com/showthread.php?t=2203345
Steps to install:
Download the zip file named FSYNCFIX.zip attached to this post and extract the files in that zip to your Prime.
Open Root Explorer and go to /system/lib folder. Rename libsqlite.so and libsqlite_jni.so to libsqlite.so.bak and libsqlite_jni.so.bak respectively.
Copy the libsqlite.so and libsqlite_jni.so files that came from the attached zip (using root explorer for example) to the /system/lib folder (Mount that folder as RW if necessary).
Set permissions on the two files to rw-r--r-- (picture of what it looks like attached to post)
Reboot.
If something went wrong your prime will not boot but will be stuck at the booting screen. At that point use the directions at the top of the post.
CREDIT: http://forum.xda-developers.com/showthread.php?t=1691669
4. Fix Entropy
This is a big deal to fix lagginess. Confirmed by richardmlea to improve the browser. Also helps with apps that have lists in my experience.
You can get Seeder from the Play Store and support the developer (or search and find the thread on XDA):
https://play.google.com/store/apps/details?id=com.lcis.seeder&hl=en
Run the app, turn on everything and tell it to start at boot.
5. Replace build.prop (Undo this step before installing updates)
(softbrick risk and might cause problems with upgrading if not undone)
Credit to MR.WOOKIE for the base I used to make the build.prop. It improves all sorts of stuff in little ways- network improvements, UI improvements, JPEG viewing improvements.
To install:
Download the attached correct (US or WW depending on what Prime you have) build.prop.zip files from this post and extract it to your Transformer.
NOTE: Currently the attached build.props are only for the TF201. Will brick other Transformers.
Using Root Explorer or something, go to your /system folder and find build.prop and rename it to build.prop.bak
Then copy the build.prop file from the zip to the /system folder and change its permissions to rw-r--r-- (picture of what it looks like attached to post).
Reboot
6. Install the Pimp My Rom app (Undo this step before installing updates)
NOTE: This step must be done AFTER step 5 if you are going to do step 5. If you don't do step 5 the using Root Explorer or something, go to your /system folder and find build.prop and rename it to build.prop.bak before using Pimp My Rom.
Get it here:
https://play.google.com/store/apps/details?id=com.androguide.pimp.my.rom
I did a lot with this app, give it Five Stars!
Under Tools:
First I activated "Universal Init.d Support". Then confirm it works
Entropy generator is much like Seeder, but not as good.
Under Tweaks:
Under "Network and Internet" I enabled "Wifi Connect Speed Tweak" and "Faster Media Streaming" at the top part. Under Init.d ans Sysctl Tweaks I enabled "avoid Time-Wait," "Block Redirects," Block Source-Routing," and "IPv4 Tweaks." Now the play store doesn't act up any more saying it can't load.
Under "Android Features" I enabled "Hardware acceleration," Force CPU rendering,"
Under "Miscellaneous Tweaks" I enabled "Optimize sqlite Databases," "Ext4 File-Systems tweaks," Internal SD-Card I/O Tweaks," External SD-Card I/O Tweaks," and "Zipalign all APKS at each boot." These changes make a huge difference in the performance of almost everything.
7. OOM and SD cache
This will help responsiveness and RAM management. As per nhshah7
Download Kernel tuner:
Go to OOM and set it to 1000 aggressive.
Go to Misc and set the SD cache to 4096
8. Wipe the Dalvik Cache
Thanks to pooblej for this one.
Download this app:
https://play.google.com/store/apps/details?id=com.j.y.daddy.customizer
Open the app.
Go to "SET"
Select the "Wipe Dalvik-Cache" option.
It will then reboot with a pretty long boot time.
9. Trim
Do this last.
Use the lagfix program to TRIM your Prime:
https://play.google.com/store/apps/details?id=com.grilledmonkey.lagfix&hl=en
Just open it and hit Run.
Extra Optional Stuff to do
10. Install Browser2RAM
http://forum.xda-developers.com/showpost.php?p=34885711&postcount=58
Let it run as root. Can work with stock browser or Chrome. Thanks qskile for pointing it out and t3hSteve for the apk.
Personally I think this eats a lot of RAM and is not needed when you do all the other tweaks, but it is FAST! Hard to resist probably.
11. Install and use PieControls
These are all the rage now. Getting this feature is as easy as installing this apk to use the LMT Launcher:
http://forum.xda-developers.com/showthread.php?t=1330150
Here is a good guide that goes over setting up this feature with pictures:
http://highonandroid.com/android-ap...rooted-android-smartphonetablet-lmt-launcher/
Things left to do:
1. Data2SDish hack
2. Volume boost that works with Jellybean (Don't try anything Beats it won't work)
3. V6 SuperCharger - Can cause more problems than solutions unless done right and I need to research more. Kernel tuner goes a long way.
Thank you in advance for any and all responses or thanks.
I also wanted to know about the build tweaks now possible if we can root stock ...
I will let you know what I discover. So far the biggest boosts are browser2ram and freezing all the Asus bloat. It already feels like a different tablet now.
Set performance mode to performance. Enables it to clock at 1.4 ghz (wish we could go higher with stock kernel!)
download Kernel tuner, go to OOM, presets and set it to 1000 aggressive. Also in kernel tuner, set SD cache to 4096.
I didn't find seeder to actually help. Also download Rebooter from the play store and "Hot boot" if you slow down. It essentially kills all non-system apps.
Haven't tried the other apps you linked to the play store. My prime FLIES now
Edit: also have not tried build prop tweaks. Don't see a need just yet, might affect future OTA upgrading as well.
EDIT: Talking about performance, for browsers, I use dolphin with dolphin's jet pack. Doesn't have flash, but sunspider shows this to consistently be the fastest between any other browser on the market. Stock and Chrome come in slightly behind (in that order).
Maybe it is just the euphoria of getting root but seeder works great for me. first thing i installed after rooting. The stockbrowser and xda homepage (showing all devices) would crash the browser every time (stop responding, and require restarting) with seeder it is fine. I even uninstalled seeder to test if imagined the effect but didn't. For me seeder makes the stock browser fully usable. I dont think the browser has stopped responding since i installed seeder.
I will have a go at some of the other tweeks now.
poofyhairguy, Good idea to compile a list of tweeks, maybe you can keep the OP tidy and list and tweeks that other posters suggest in the first post.
One from me that you have already mentioned, to increase the volume get Volume+ from the play store. There is a free version and a paid version that claims to increaseit more. Maybe someone can suggest something better for the same job and completly free.
Also there was/is an app or tweek to improve the touchscreen persission and sensativity. Anyone know what thats called?
More idea's....?
Afternoon all, I have done most of the tweeks and i am seeing excelent gains in smoothness and responsiveness.
Quick question, i have disabled loads of the bloat apps using settings/apps/all selecting the app and selecting disable, but is there any advantage using titanium backup to freeze or remove the bloat app's?
richardmlea said:
Afternoon all, I have done most of the tweeks and i am seeing excelent gains in smoothness and responsiveness.
Quick question, i have disabled loads of the bloat apps using settings/apps/all selecting the app and selecting disable, but is there any advantage using titanium backup to freeze or remove the bloat app's?
Click to expand...
Click to collapse
Don't remover, just freeze it. If you need to OTA, it checks to make sure all the Asus apps are still there.
Also interesting tidbit on seeder. I'll try it again.
As far as changing governors, I could never get it to stick on anything other than interactive...?
Sent from my HTC One X using xda app-developers app
richardmlea said:
poofyhairguy, Good idea to compile a list of tweeks, maybe you can keep the OP tidy and list and tweeks that other posters suggest in the first post.
Click to expand...
Click to collapse
Good idea. I will also add the stuff I discovered.
richardmlea said:
One from me that you have already mentioned, to increase the volume get Volume+ from the play store. There is a free version and a paid version that claims to increaseit more. Maybe someone can suggest something better for the same job and completly free.
Click to expand...
Click to collapse
Looking into it volume plus no longer works in jellybean. So something else is needed.
I have updated OP with new findings.
Just PMed a mod to move this to General. I'll try Pimp My Rom when I get some time this week and report back if it works or not!
Please keep this list going - Everyone will need to know these things as more people root.
pooblej said:
Please keep this list going - Everyone will need to know these things as more people root.
Click to expand...
Click to collapse
I plan to. I am going to keep working on it until we get as much as we can get out of it. Plus I have crosslinked this guide on the TF300T and TF700 forums.
OP has been updated with my recent attempts.
Nice tweaks without root.
Maybe some things will work with my s3 because my Prime is rooted from the first second
Kind of slow at work tonight so I know what I'll be doing. :good:. Any benchmark numbers before and after doing all this?
I used to use Volume + but is seemed to quit working on JB. I am now using Music Volume EQ. It may not boost your volume as much as Volume + but it works well and I like the EQ, virtualizer and Bass boost functions. I just wish they would optimize their interface for tablets, it's kind of small for a 10 inch screen.
Music Volume EQ
One thing I've noticed with Music Volume EQ is sometime you have to open the app (or press the widget) for it to turn on. I haven't tested it if this is just after a reboot or it happens randomly.
EDIT - At this point all I can is WOW. This stuff really works. Pimp My Rom is the bomb. I've done everything in the list but install Seeder. With Pimp I don't think it's necessary but I may try it later. Also I can't get the CPU manager to boot into Performance mode with Pimp. Not really a big deal since ever since I've had my Prime and rebooted the first thing I do is to switch to Performance mode. It's like second nature to me now. I'll keep messing with it, it's probably something I'm doing.
Thanks for this very good Thread!!!
Thanks for this guide. At least I got root again easily. I did all the tweaks, lets see is the device any better.
theandies said:
Any benchmark numbers before and after doing all this?
Click to expand...
Click to collapse
A lot of these improvements show up in feel, not in benchmarks. But I might add some to the OP. Glad it it helped.
I am going to have a big update tonight. Got FSYNC turned off, almost done with build.prop tweaks plus maybe another surprise or two.
poofyhairguy said:
A lot of these improvements show up in feel, not in benchmarks. But I might add some to the OP. Glad it it helped.
I am going to have a big update tonight. Got FSYNC turned off, almost done with build.prop tweaks plus maybe another surprise or two.
Click to expand...
Click to collapse
Can't wait! I am now rooted and working through the list!
How did you turn off Fsysc? do you know what the risk is? ie if an app force closes and the TF201 reboots - ie is it safe?
Please let me know your thoughts...
pooblej said:
Can't wait! I am now rooted and working through the list!
Click to expand...
Click to collapse
If you are going through the list now please don't install Seeder ( I found something better I think) and hold off on Pimp My Rom or you will have to redo it.
I am going to make a TON of changes to the guide tonight.
How did you turn off Fsysc?
Click to expand...
Click to collapse
I found a libsqlite.so that was compatible. I promise as soon as I make sure it is safe today I will post how to do everything.
do you know what the risk is? ie if an app force closes and the TF201 reboots - ie is it safe?
Please let me know your thoughts...
Click to expand...
Click to collapse
This post basically sums up the risk:
http://forum.xda-developers.com/showpost.php?p=27122865&postcount=42
I think it is safe enough given that. The ROMing community here has bought into it 100% and so if it was a big deal it wouldn't be used. I never would make my life depend on my Prime.
And I almost can't explain how much faster it is with FSYNC off. Like everything else in the guide put together doesn't do as much. It is amazing.
poofyhairguy said:
First thing, update to the newest Jellybean Asus has given us and root it using this method (thanks flumpster).
Click to expand...
Click to collapse
My name isn't flumpster...
If your going to credit someone, either credit my name correctly (Morlok8k) or the original creator of the method (djrbliss).
Morlok8k said:
My name isn't flumpster...
If your going to credit someone, either credit my name correctly (Morlok8k) or the original creator of the method (djrbliss).
Click to expand...
Click to collapse
Sorry about that. I will change my guide now.

Categories

Resources