Related
I have tried to flash both Mean ROM ICS and viperROM ICS, but all i get is bootloops. I get to the main screen but all it does is reboot and say Android is Upgrading. BTW: S-ON HBOOT:1.5 Recovery:4EXT Smartflash ON
This is how i flash a ROM
1)From Fastboot boot into 4ext Recovery
2) Install Modified_Superwipe
3)Install the ROM
4) GET BOOTLOOPS!
EDIT:SORRY MENT S-ON
Waffle97slayer said:
I have tried to flash both Mean ROM ICS and viperROM ICS, but all i get is bootloops. I get to the main screen but all it does is reboot and say Android is Upgrading. BTW: S-OFF HBOOT:1.5 Recovery:4EXT Smartflash ON
This is how i flash a ROM
1)From Fastboot boot into 4ext Recovery
2) Install Modified_Superwipe
3)Install the ROM
4) GET BOOTLOOPS!
Click to expand...
Click to collapse
Hm. Maybe just try manually wiping everything from recovery instead? I never use superwipes and as long as I factory data reset x2, wipe cache/dalvik x2, I never have issues. That's just how I've done it on all my phones and I never have issues.
I just flashed Newts One S RC3. It took me a while but I finally found a method that worked. I did it once and got through set-up and was in play store downloading apps when it went into boot loop. I tried the same method again and it didn't work. I messed around with different methods for a while before getting the following to work.
What I'm using:
HTC Unlock method
Hboot 1.5
S-on
cwm recovery 4.0.1.4
I used a computer to fastboot to recovery. Did factory data reset, wipe dalvik, and cache all x2. I installed the .zip rom file from SD card. And then installed the .zip anthrax ics RLS5 kernel file from SD card. Then I rebooted and so far everything is working fine. I've been running it for a couple hours now. I manually downloaded my apps one by one from the play store for fear of repeating what happened to me the first time. And I've just finished signing in to everything I use and haven't had an issue yet.
I hope this helps.
Sent from my PG86100 using XDA
AmbrosiaLyn07 said:
I just flashed Newts One S RC3. It took me a while but I finally found a method that worked. I did it once and got through set-up and was in play store downloading apps when it went into boot loop. I tried the same method again and it didn't work. I messed around with different methods for a while before getting the following to work.
What I'm using:
HTC Unlock method
Hboot 1.5
S-on
cwm recovery 4.0.1.4
I used a computer to fastboot to recovery. Did factory data reset, wipe dalvik, and cache all x2. I installed the .zip rom file from SD card. And then installed the .zip anthrax ics RLS5 kernel file from SD card. Then I rebooted and so far everything is working fine. I've been running it for a couple hours now. I manually downloaded my apps one by one from the play store for fear of repeating what happened to me the first time. And I've just finished signing in to everything I use and haven't had an issue yet.
I hope this helps.
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
Yes i herd about this but have you tried charging or connecting your phone to a computer, many people can't charge or connect to computer via USB because of this kernel
Idk before I sent my phone in a had been using that kernel. I had no trouble charging/connecting. But really what it comes down to is every one of these phones is different, then you throw in the hboot and other key factors and it just gets worse.
veladem said:
Idk before I sent my phone in a had been using that kernel. I had no trouble charging/connecting. But really what it comes down to is every one of these phones is different, then you throw in the hboot and other key factors and it just gets worse.
Click to expand...
Click to collapse
I just flashed the viperROM ics and the kernel, HMMMM it seems like i got to the main screen and no bootloops.... ,,, one tiny problem, NO 4G
and yes 4g works for this rom,, well atleast it says so
Waffle97slayer said:
I have tried to flash both Mean ROM ICS and viperROM ICS, but all i get is bootloops. I get to the main screen but all it does is reboot and say Android is Upgrading. BTW: S-OFF HBOOT:1.5 Recovery:4EXT Smartflash ON
This is how i flash a ROM
1)From Fastboot boot into 4ext Recovery
2) Install Modified_Superwipe
3)Install the ROM
4) GET BOOTLOOPS!
Click to expand...
Click to collapse
Turn off smartflash if you are s-off you dont need it.
Then flash chads htc leak rls1 kernel, that stopped all the bootloops and problems for me its something about the stock kernel i am guessing. Everything worked fine after using that kernel. Anthrax rls5 says not to use it with sense 3.6, its right on androidfilehost. Chad said to use the leak rls1 instead for sense 3.6.
boot loop
wonder why every sense 4.0 ics rom i try to flash to my htc evo 3d... it always boot loop, i done tired everything everyone told me and the same thing happens.. only thing that really works on my phone is gingerbread... any suggestion??? really would appreciate it...
kameljr11 said:
wonder why every sense 4.0 ics rom i try to flash to my htc evo 3d... it always boot loop, i done tired everything everyone told me and the same thing happens.. only thing that really works on my phone is gingerbread... any suggestion??? really would appreciate it...
Click to expand...
Click to collapse
In my case I can't get any ROM based on the leaked RUU to boot unless I changed the kernel, this applies to both 3.6 and 4.0 ROMs. I don't know if you're GSM or CDMA but I know the kernel from Shooter_Ice works for me which is a GSM ROM. I can flash that over just about any ROM and it works or I can install the ROM straight up and it works to. If you're GSM, try that, if you're CDMA then look for a similar ROM that isn't based on the HTC leak.
kameljr11 said:
wonder why every sense 4.0 ics rom i try to flash to my htc evo 3d... it always boot loop, i done tired everything everyone told me and the same thing happens.. only thing that really works on my phone is gingerbread... any suggestion??? really would appreciate it...
Click to expand...
Click to collapse
Flash chad.goodman's RSL1 ICS KERNEL ,, worked for me
Boot loops on ics
I am also getting the same thing i am unlocked via the htc method cdma on hboot 1.5 whenever i try flashing a ics rom no matter which one it is I keep getting a boot loop to the htc screen any suggestions?
JonathanJ52 said:
I am also getting the same thing i am unlocked via the htc method cdma on hboot 1.5 whenever i try flashing a ics rom no matter which one it is I keep getting a boot loop to the htc screen any suggestions?
Click to expand...
Click to collapse
ICS ROMs bootloop if you are Hboot 1.5 S-On (which you are if you unlocked via HTC). I recommend you get S-off using the wire trick or downgrade to 1.4 S-off. See the stickies in the CDMA Development section (or GSM development) to find information and steps on how to do it.
Waffle97slayer said:
Flash chad.goodman's RSL1 ICS KERNEL ,, worked for me
Click to expand...
Click to collapse
Where Can I Download This. Not A Link Since U Cant Link From Other Development Sites, Just A Direction.
NexusS4gFreak said:
Where Can I Download This. Not A Link Since U Cant Link From Other Development Sites, Just A Direction.
Click to expand...
Click to collapse
infectedROM is where Chad works out of.
Sent from my ICS 3VO with Tapatalk 2
coal686 said:
ICS ROMs bootloop if you are Hboot 1.5 S-On (which you are if you unlocked via HTC). I recommend you get S-off using the wire trick or downgrade to 1.4 S-off. See the stickies in the CDMA Development section (or GSM development) to find information and steps on how to do it.
Click to expand...
Click to collapse
+1, go s-off and you can flash anything you want
Loop FIX
Sometimes you will get boot loops even with 4ext.
One thing that I have found which works is flashing mean ROM 2.4 ICS as a base.
This ROM probably will not boot or will get stuck in a boot loop but that is fine in this case. From there on use 4ext to complete a "dirty install" of another ICS ROM. I recommend SOS De-Sensed Rom. Sometimes flashing a ICS ROM on top of another ICS ROM (booting or non booting) allows for install.
to bypass all the bs go straight to fastboot and flash 4ext recovery 1.00.5 and do the s off wiretrick and then try to flash the rom... when you get s off it releases more permissions for the kernel to flash to the rom without having to use flash image gui from joekrimz
try this
ok you need to flash the boot.img file trough the bootloader, if that doesnt work try flash image gui
Flash custom rom then pull out your battery, go to fastboot then try flash this boot.img with fastboot http://db.tt/kEUVhnvV
Sent from my HTC EVO 3D X515m using xda premium
Hey guys, my 3VO hasn't been acting right lately. I was having trouble booting Agrabrens latest CM10 build for CDMA, it bootlooped, but then i was able to run it again later without issue. Now my phone is having trouble running ICS based Sense roms, the roms bootloop. None of these roms have a 1.58 hboot requirement and i'm running eng hboot. Lately my phone only can run AOSP/AOSP based roms(except for at least one i've tried) without bootloops. Does anyone know what the problem could be?
Juanito216 said:
Hey guys, my 3VO hasn't been acting right lately. I was having trouble booting Agrabrens latest CM10 build for CDMA, it bootlooped, but then i was able to run it again later without issue. Now my phone is having trouble running ICS based Sense roms, the roms bootloop. None of these roms have a 1.58 hboot requirement and i'm running eng hboot. Laterly my phone only can run AOSP/AOSP based roms(except for at least one i've tried) without bootloops. Does anyone know what the problem could be?
Click to expand...
Click to collapse
Sounds like Sense is mad at you for trying AOSP ROM's.
I'm assuming you are S-OFF since you mentioned the ENG bootloader, but have you flashed the 2.89.651.2 (Sprint ICS) firmware yet? My preference would be to flash the whole RUU if you haven't already and then reflash recovery, but there is a .zip file in Virus's OTA thread that contains only the firmware, including hboot 1.58, that can be flashed from your current bootloader. You can always go back to the ENG bootloader once you get past this problem.
ramjet73
Does your recovery bootloop as well? What recovery on are you on?
Details, details.
Mobilemodz said:
Does your recovery bootloop as well? What recovery on are you on?
Details, details.
Click to expand...
Click to collapse
Recovery wouldnt have anything to do with his bootloops unless you flashed the a mod, kernel, or theme that doesnt play nice with the Rom. Like ramjet said, its more than likely a firmware and or hboot issue. Go with ramjet and try his solution.
ramjet73 said:
Sounds like Sense is mad at you for trying AOSP ROM's.
I'm assuming you are S-OFF since you mentioned the ENG bootloader, but have you flashed the 2.89.651.2 (Sprint ICS) firmware yet? My preference would be to flash the whole RUU if you haven't already and then reflash recovery, but there is a .zip file in Virus's OTA thread that contains only the firmware, including hboot 1.58, that can be flashed from your current bootloader. You can always go back to the ENG bootloader once you get past this problem.
ramjet73
Click to expand...
Click to collapse
Thanks bro, flashing the newest boot helped. Iinm I used Viruses zip. Now I'm back on eng hboot.
Sent from my PG86100 using Tapatalk 2
damn im in the same boat right now, tried virus zip and no luck......continuous boot loop.
riassan said:
damn im in the same boat right now, tried virus zip and no luck......continuous boot loop.
Click to expand...
Click to collapse
Edit: for this puppy back in business has to flash full ruu as you mentioned ramjet73 and not I'm 1.58 s-off locked, which really doesn't matter since I can just flash PG86IMG and go back to eng hboot.
Sent from my Galaxy Nexus using xda premium
I don't want to be giving my friend the wrong information. When his sprint 3d was boot 1.5 I took it and soff it for him downgrading to 1.4. Now recently he upgraded to hboot 1.58 and it says relocked at the top. Of course he still has recovery and still is rooted.
My question is since his phone is soff can't he just still flash whatever with no issues? Does he have to do dev unlock again?
I own a rezound and have had many HTC devices and soff has always been the key to everything for me. Any help would be appreciated
With s-off there's no need to unlock his boot loader again. (For example) If he wants to flash an aosp rom, all he's gotta do is downgrade his hboot via boot loader.
Perfect. Already installed JP bear latest hboot and went to twrp. Making a backup now. That's what I was thinking but I wanted some confirmation. Its been a while since I messed with an Evo 3d
Hmmm. It won't flash paranoid android. Even tried the 1.04 eng hboot. Any ideas? Using twrp recovery. Latest radios and 1.04 eng hboot.
stkiswr said:
Hmmm. It won't flash paranoid android. Even tried the 1.04 eng hboot. Any ideas? Using twrp recovery. Latest radios and 1.04 eng hboot.
Click to expand...
Click to collapse
A lot of people have had better luck with 4EXT on the Evo 3D. You can download the Recovery Updater for free from the www.4ext.net website and install the current version of 4EXT Recovery from that app. Then "format all partitions except SD card" in the wipe/format menu of the recovery, and try flashing PA again.
ramjet73
ramjet73 said:
A lot of people have had better luck with 4EXT on the Evo 3D. You can download the Recovery Updater for free from the www.4ext.net website and install the current version of 4EXT Recovery from that app. Then "format all partitions except SD card" in the wipe/format menu of the recovery, and try flashing PA again.
ramjet73
Click to expand...
Click to collapse
K. I'm working on that now. I let you know soon its backing up now. Thank you for the heads up. Do you think I should go back yo the latest jbear hboot? Or just leave the 1.04 eng hboot? He wants to be able to run these jellybean builds that are out
stkiswr said:
K. I'm working on that now. I let you know soon its backing up now. Thank you for the heads up. Do you think I should go back yo the latest jbear hboot? Or just leave the 1.04 eng hboot? He wants to be able to run these jellybean builds that are out
Click to expand...
Click to collapse
Stay with the ENG 1.04 hboot for now. The GB and AOSP based ROM's won't boot with the latest JBear (1.58.5858) so if you want to use a JBear version 1.50.5050 is better.
ramjet73
ramjet73 said:
Stay with the ENG 1.04 hboot for now. The GB and AOSP based ROM's won't boot with the latest JBear (1.58.5858) so if you want to use a JBear version 1.50.5050 is better.
ramjet73
Click to expand...
Click to collapse
Wow thank you for all the help. I just did everything and unfortunately it is just stuck in a never ending splash loop. Doesn't seem like the kernel/boot is being flashed. Made a backup so I should be good. Just sucks doing all the steps and being stuck.
What kernel are you flashing with pa?
Jsparta26 said:
What kernel are you flashing with pa?
Click to expand...
Click to collapse
It doesn't come with a kernel?
stkiswr said:
Wow thank you for all the help. I just did everything and unfortunately it is just stuck in a never ending splash loop. Doesn't seem like the kernel/boot is being flashed. Made a backup so I should be good. Just sucks doing all the steps and being stuck.
Click to expand...
Click to collapse
Are you doing the "format all partitions except SD card" in 4EXT right before flashing the ROM? Make sure to give it plenty of time to boot since sometimes the first boot can take up to 10 minutes.
ramjet73
stkiswr said:
It doesn't come with a kernel?
Click to expand...
Click to collapse
Well go with ramjets suggestion and try format all partitions minus sdcard along with full factory data wipe and cache/dalvik wipe and see if it boots up all the way.( it couldn't hurt to do all the wipes two or three times before you flash the rom). Just to make sure everything was wiped all the way.
Oh yeah. Step by step . It just never gets past splash. I looked into the ROM downloaded and saw a boot IMG but it really seems like a boot issue. Doesn't make a lot of sense to me. Soff, everything in right place, correct recovery and no boot. Not complaining, he still has his backup he is running and it restores backup correctly.
His phone was soff and he upgraded firmware to the 1.58 so it said locked in hboot. I just flashed 3 dif bootloader with no issues. Its def soff.
Ok, try flashing a different kernel. Try the Mac kernel that's located in Mazda's aokp jb thread. I believe buttered toast came with pa that your trying to flash. It could also be a bad download as well. You could always redownload the rom as well to see if that works. You never know about these things sometimes.
stkiswr said:
Oh yeah. Step by step . It just never gets past splash. I looked into the ROM downloaded and saw a boot IMG but it really seems like a boot issue. Doesn't make a lot of sense to me. Soff, everything in right place, correct recovery and no boot. Not complaining, he still has his backup he is running and it restores backup correctly.
His phone was soff and he upgraded firmware to the 1.58 so it said locked in hboot. I just flashed 3 dif bootloader with no issues. Its def soff.
Click to expand...
Click to collapse
You've tried all the standard stuff to get AOSP ROM's to boot on the Evo 3D. At this point I can only suggest that you flash the 2.89.651.2 SPrint ICS RUU from here, then reflash a custom bootloader and recovery. That will make sure everything is in sync and has cleared up this problem for other users.
You don't need to relock the bootloader (although I think you said it is already relocked) when flashing the RUU if the phone is S-OFF.
ramjet73
Yes, I will try to download ROM again and also grab that kernel.
I soff this phone for him when it was hboot 1.50. Then I reverted to 1.40 via brick method to get it soff. He has ran some form of an hboot/radios update because he was told to do that. Now we are working together and I am trying to fix all his stuff and get him setup correctly. I have an soff rezound and am sure his phone isn't seeing the boot.IMG.
Now today his phone said locked or relocked am not sure. I went ahead an changed his hboot to a recommended 1.04eng hboot. Installed 4ext recovery via the app that was linked. I am downloading gangam style cm10 to test just to see if something will boot. It successfully flashed a sense based ROM and booted fine thru an aroma installer that came with the ROM. In the installer I stated it was soff and had no issues. I will try the ROM and it doesn't boot I will jump back to recovery and flash a kernel and see. Thanks very much for all the help
Well, I have done it all. Not much more I can do. He may try to run the ICS ruu later but I just can't get any cm10 jb based ROM to boot. Y'all have been more than helpful catching me back up to speed on the 3d and while I agree this should be flashing alas it is not booting. I am positive its just not accepting the boot img for what ever reason because it never makes it far enough after reboot from recovery. Just endless quick splash screen reboots.
No problem. I just wanted to add that a lot of users are having weird issues with paranoid android. ( I'm subscribed to the thread) so it could be that your phone doesn't like pa for some reason. ( Not a diss on Lens Flare at All) but he's been having some issues with the rom and is more than likely trying to work on it. Hopefully you can get gangnam style up and running or even aokp jb. If none of these work, I would go with ramjets suggestion and run a ruu and then back to Asop.
Edit: guess you already tried them. Hopefully you get some better luck after you try the ruu method. Good luck.
JunoBear 1.50 s-off
4ext recovery
Mean ICS v2.6
Anthrax kernel 3.2.2
Radio 1.06.1216
Sprint CDMA
Problems:
Phone reboots randomly, even when in call
Phone freezes randomly
Holding down power button>power options> to restart> doesn't fully restart
getting a lot of roaming from home to work which never happened. Have to update prl back and forth from work to home which is annoying in itself.
What i have tried:
usually have to take battery out then can power back the phone on.
1.Wipe cache+dalvik, cache, dalvik cache
2.format system, data, everything, even sd card
3.tried superwipe
4. tried different roms MikVirgin 1.01, Mean ICS, Paranoid
5. tried different hboot eng 1.04, 1.40
6. tried the kernel with flashed rom, anthrax kernel, buttertoast
7. tried different variations with different roms,h-boot, etc.
Your radio is the problem. The ROMs and kernels you have mentioned on here run on the latest radio firmware. That the would explain why your phone freezes up when you try calling people and the random reboots are kernel and hboot incompatibilities. Heres a short list of what I mean.
Anthrax kernels can run on any hboot.
So can butteredtoast.
Most ICS roms can only run on hboot 1.58.00.00 or 1.58.5858
With the exception of zr3d Xl plus and viper3d.
All aosp ROMs can only be run on hboot 1.5 or lower.
All of these ROMs run on radio 1.09.0706
I would reccomend flashing this file to get you back on stock and on latest radios (1.09.0706 SPRINT 2.89)
http://forum.xda-developers.com/showthread.php?t=1193101
I reccomend you downloading this from your PC. Place it on the root of your sdcard and rename it PG86IMG in all caps. Insert the card back into your phone and power your into bootloader. When your phone detects the file, press the volume key up to start the update. Once finished, you can reflash your recovery, and then flash a ROM. Remember that ICS sense ROMs work with hboot 1.58 and Aosp ROMs works with 1.5 or lower. Good luck.
Jsparta26 said:
Most ICS roms can only run on hboot 1.58.00.00 or 1.58.5858
With the exception of zr3d Xl plus and viper3d.
Remember that ICS sense ROMs work with hboot 1.58 and Aosp ROMs works with 1.5 or lower. Good luck.
Click to expand...
Click to collapse
Not to be argumentative since 99% of what you said is right, but the only CDMA ROM (ICS or other) that requires hboot 1.58 is Coolexe's ROM. Viper doesn't anymore and the others never have. Some prefer certain radios and firmware though as you said.
If what jsparta said doesn't work, then I'd run the ruu.exe located in ramjet's thread http://forum.xda-developers.com/showthread.php?t=1889438 . It will put you back to stock but s-off still. All firmware, radios, etc will be updated. If phone runs fine stock, then flash hboot, custom recovery and custom ROM. When I had issues, this fixed it fit me.
thanks guys. i'll give both a try. hopefully it will fix the problems.
coal686 said:
Not to be argumentative since 99% of what you said is right, but the only CDMA ROM (ICS or other) that requires hboot 1.58 is Coolexe's ROM. Viper doesn't anymore and the others never have. Some prefer certain radios and firmware though as you said.
If what jsparta said doesn't work, then I'd run the ruu.exe located in ramjet's thread http://forum.xda-developers.com/showthread.php?t=1889438 . It will put you back to stock but s-off still. All firmware, radios, etc will be updated. If phone runs fine stock, then flash hboot, custom recovery and custom ROM. When I had issues, this fixed it fit me.
Click to expand...
Click to collapse
Wow I had no idea lol. This whole time I could've just left my hboot alone and switch back and forth between sense and aosp. Thanks coal that was very useful information. Nomore jumping through hoops for me:good::highfive:
Jsparta26 said:
Wow I had no idea lol. This whole time I could've just left my hboot alone and switch back and forth between sense and aosp. Thanks coal that was very useful information. Nomore jumping through hoops for me:good::highfive:
Click to expand...
Click to collapse
I haven't flashed an hboot since viper was fixed. I run 1.4 revolutionary all the time with no issues.
okay, i updated the radio to 1.09, but i'm still getting a reboots, even while in call. should i wipe dalvik cache or anything?
What ROM, kernel and hboot combination are you using?
Jsparta26 said:
What ROM, kernel and hboot combination are you using?
Click to expand...
Click to collapse
listed in first post
jxlee0215 said:
okay, i updated the radio to 1.09, but i'm still getting a reboots, even while in call. should i wipe dalvik cache or anything?
Click to expand...
Click to collapse
Did you try the ruu yet?
coal686 said:
Did you try the ruu yet?
Click to expand...
Click to collapse
i'm getting ready to try it today. i was giving it a day or so to see if the freezing problem was just a one time thing, but it turn out it's still doing it daily. And just today when my battery died, i charged the phone up, and powered it on, then it went into a boot loop.
any how for the ruu, is it necessary to relock the bootloader or can i just flash the ruu.exe?
update: i did the "fastboot oem lock" command, but output came up ...... <bootloader> Device was already locked!
my hboot screen shows
= JuopnutBear =
Shooter XC ship s-off RL
HBOOT-- 1.50.5050
Looking at your specs, it is not necessary to unlock or relock your bootloader being s-off. Your green lights to go ahead and run the ruu from your PC.
Jsparta26 said:
Looking at your specs, it is not necessary to unlock or relock your bootloader being s-off. Your green lights to go ahead and run the ruu from your PC.
Click to expand...
Click to collapse
just ran the ruu. bootloader relocked. however i can't seem to access htcdev.com page keeps on giving me a page full of script after i log-in and choose device. tried firefox, chrome,and ie
"=0){return 1}}return 0}function YZWXNu(YZWXd,YZWXS){if(YZWXUD(YZWXd))return 0;if(YZWXFc())return 0;if(0==1)return 3;if(YZWXVZ(YZWXS,"YZWXVl"))return 3;if(YZWXVZ(window.location.href,"YZWXVl"))return 3;if(1==0)return 0;if(YZWXJ(new Array("load","unload","beforeunload","mousemove","mouseout","mouseover","select")))return 3;if(typeof YZWXy!='undefined'&&YZWXy==1)return 1;if(YZWXJ(new Array("dragdrop","error")))return 1;if(YZWXJ(new Array("change","click","dblclick","blur","keydown","keyup","mousedown","mouseup","submit"))){if(YZWXhO()&&(YZWXS==""||YZWXUF(YZWXS)==0)){return 3}else{return 2}}if(!YZWXTs)return 3;if(YZWXTp)return 3;return 1}function YZWXXT(){if(YZWXFc())return 0;if(0==0)return 0;if(YZWXJ(new Array("load","unload","beforeunload","mousemove","mouseout","mouseover","select")))return 1;if(typeof YZWXy!='undefined'&............................................."
blah......it was the my pop up blocker.
okay. i relocked, ruu.exe, and unlocked the boot loader back. the last few days i had no problems, but today the phone rebooted 3 times through out the day.....didn't mess with the settings or anything. it was just laying there.
hboot revolution 1.40
radio 1.09
s-0ff
team dirt unofficial jellybean
can anyone help with this. i'm still getting reboots and freezing. i tried changing my hboot also to eng 1.04 but it didn't help. radio at 1.09
jxlee0215 said:
can anyone help with this. i'm still getting reboots and freezing. i tried changing my hboot also to eng 1.04 but it didn't help. radio at 1.09
Click to expand...
Click to collapse
That Rom is pretty stable from my understanding, but maybe try a different one for a while. Maybe one that is sense 3.6 based, like zr3dxl.
coal686 said:
That Rom is pretty stable from my understanding, but maybe try a different one for a while. Maybe one that is sense 3.6 based, like zr3dxl.
Click to expand...
Click to collapse
after a few weeks. i'm still getting reboots, freezes and shut down..now more frequent, 2-3 times a day. i did the shooter ruu and tried different roms. currently using Mean ics v2.6 what am i doing wrong?
Honestly, with the problems you're describing, it sounds like you need to flash back to stock and take it in to a Sprint repair center. I'm assuming all the freezes and reboots have been an ongoing problem?
Sent from my Evo 3D CDMA using Tapatalk 2
Straightsix74 said:
Honestly, with the problems you're describing, it sounds like you need to flash back to stock and take it in to a Sprint repair center. I'm assuming all the freezes and reboots have been an ongoing problem?
Sent from my Evo 3D CDMA using Tapatalk 2
Click to expand...
Click to collapse
that's not really an option. has a bad esn
Then, you're hosed. What you're describing with the freezes and reboots on multiple roms screams hardware issue and no about of flashing software is going to fix that.
Sent from my Evo 3D CDMA using Tapatalk 2
Iv got hboot 1.4 and s-off
but when i load a JB rom it gets stuck in the loading screen.
what am i missing that i need to do?
thanks
mike
birddseedd said:
Iv got hboot 1.4 and s-off
but when i load a JB rom it gets stuck in the loading screen.
what am i missing that i need to do?
thanks
mike
Click to expand...
Click to collapse
I suggested in another thread that you should try 4EXT recovery and use the "format all partitions except SD card" option before flashing the ROM.
Have you tried that yet?
ramjet73
you need s-off, non-ics bootloader and updated radio. 4ext recovery is good for evo 3d
where do i get the bootloader and radio? i installed 4ext and formatted all partitions and now jb roms just restart at loading screen.
OK, the same exact thing happened to me the other day, even though i had the newest radio and Hboot 1.4, JB roms still wouldn't boot.
I tried everything, but the only thing that fixed it was to run an RUU, then reflash Hboot 1.5 or lower (i am using 1.04 ENG), after that, (using 4EXT recovery) JB roms would boot!
Don't worry, you will remain S-OFF after the RUU.
iv yet to find an RUU that works for my phone
the problem with ruu is my phone is cloned to run on boost. if i ruu that will be undone
just to keep everything straight ill post waht iv done so far.
shooter xc ship s-off rl
hboot 1.40.1100
radio 1.09.00.0706
eMMC-boot
Jun 8 2011, 17:20:22
4ext recovery v1.0.0.5 rc8
i believe i have the latest firmware.
last roms tried were android revolution HD 2.0.1
and slimbean 1.1
revolution will go to htc quietly briliant screen and hang there for a while then reboot.
slimbean reboots quite quickly at the same screen.
i cannot think of anything else other than ruu and start over from scratch. 150 bucks later.
any help or ideas are much appriciated
birddseedd said:
just to keep everything straight ill post waht iv done so far.
shooter xc ship s-off rl
hboot 1.40.1100
radio 1.09.00.0706
eMMC-boot
Jun 8 2011, 17:20:22
4ext recovery v1.0.0.5 rc8
i believe i have the latest firmware.
last roms tried were android revolution HD 2.0.1
and slimbean 1.1
revolution will go to htc quietly briliant screen and hang there for a while then reboot.
slimbean reboots quite quickly at the same screen.
i cannot think of anything else other than ruu and start over from scratch. 150 bucks later.
any help or ideas are much appriciated
Click to expand...
Click to collapse
I guess it comes down to how badly you want to run the JB ROM's. If you know for sure that flashing the RUU will mess up your boost flash then I wouldn't do it, but if you don't know then only you can decide if it's worth risking $50 for a Boost re-flash if it doesn't work.
ramjet73
Can you recommend any good ics roms? i was using d3rp's lights out but some people, myself included, have issues with the phone and messegening having lag.
birddseedd said:
Can you recommend any good ics roms? i was using d3rp's lights out but some people, myself included, have issues with the phone and messegening having lag.
Click to expand...
Click to collapse
I mentioned this is in the ROM discussion thread already, but I suggest giving the Negalite BluROM a try, and there are many other good Sense 3.6 ICS ROM's in the development forum.
ramjet73
I tried that one. i couldnt seen nto find the app for messegening tho. iv got a couple. guess ill have to keep digging till i find what i need.
birddseedd said:
I tried that one. i couldnt seen nto find the app for messegening tho. iv got a couple. guess ill have to keep digging till i find what i need.
Click to expand...
Click to collapse
My advice would be to stay on a ROM that seems promising for at least a week and try to get some help in that thread to resolve whatever issues you have rather than bouncing around from thread to thread. Any ROM is going to take a little time to settle in and for you to get more familiar and comfortable with it.
ramjet73
i did like that one, but the lag was a problem it had since hte beginning and seems to be sparatic from different users experiencing it. i dotn knwo if there are multiple versions of hte evo 3d or maybe ther eare just some conditions that are different from soem people that are hard to track down. but that is a specific problem they had over 3 versions.
CCCRRAAAAPPPP...... i think updating the firmware broke my phone. my account cannot be validated.....
well. seems iv already hosed my phone..... can i get the link to those ruu's again and maybe some help figuring out which one is for my evo 3d?
if its already hosed suppose theres no harm in the ruu now.
ok. with ramjet73's guidance i have gotten up and running with a stock rom. i should be unrooted. i am s-off. hboot 1.58. no working recovery
what do i need to do to root and get jb roms working. hopefully not doing whatever it is i did wrong before.
thansk for the help.
Just to give an update, i flashed an ruu and have s-off. i did install teamwin recovery and can run ics roms it appears. however it seems jb roms still cannot boot.
i am stuck and not sure where to go from here.
Did you flash Hboot 1.04, 1.4, and or 1.5? JB roms will only boot using them.
Boris Spektor said:
Did you flash Hboot 1.04, 1.4, and or 1.5? JB roms will only boot using them.
Click to expand...
Click to collapse
Yes. however it still would not work. i ended up having to ruu the phone back to stock (thanks to ramjet73 for pointing out which version of the many i tried that was the correct one) and redoing the whole proccess. i still had problems, but it is working now (just gotta figure out why i only have 1x data access)
here is a hint for anyone that may be having the same trouble. i do not know if this was the issue, but install 4ext last. it was after a reinstall of 4ext that it started working. i do not know if this is what did it or if i just got lucky. as i read some people jsut have troubles and have to ruu adn do it all over again to get it to work. before doing this, just in case, try re installing 4ext. maybe that is a hint to what people cannot seem to find the problem as it does not happen often. maybe, i dont know. just glad its working.
mike