Auto connect 2 bluetooth devices fails - Android Q&A, Help & Troubleshooting

Dear all,
I hope you guys have a solution for the following problem:
I wan't to AUTO connect 2 bluetooth devices in my car.
1 device uses phone-audio (parrot) and the otoher ad2p protocol (car-radio)..
It only auto-connects 1 device. Somethimes the parrot and the other time my radio. When i connect the other device by hand its connected to 2 devices.
I have an origonal rom on my HTC sensation. I had the same problem with the revolution rom.
Tnx (sorry for my bad english)

nobody ?

You are not alone in this. I can only find one bluetooth auto-connect app, it will only allow the selection of a single device.
Also, it uses the device hardware name, not the name you entered into your BT menu. I have two dongles that are the same name, but since it doesn't differentiate I can't even use it for the single device if the other one has been paired and not deleted, it seems to randomly pick one of the devices.
If the dev would allow multiple devices to be auto-connected and at least differentiate via BT MAC rather than device name it would cover me fine.
http://forum.xda-developers.com/showthread.php?t=1543666

The app 'quick bluetooth lite' works. It now connects 95% of the time.

Related

BT GPS feature on a BT HEADSET.

i have a BT-Q818 and one cool feature it has is that it goes on stand by mode once there is no connection. this is the case when i step out of the car. and whenever i start driving again, i seem to have had no pairing issue.
question is, is this FEATURE available on any BLUETOOTH HEADSET? reason being is that i only use my BT HEADSET when i drive and im getting tired with my current HS810 where its a hit and miss. sometimes it would pair and sometimes it would not.
thanks for any input guys.
Upon disconnection, the Nokia HS12-w displays "disconnected". Pressing the play button for a couple of seconds causes it to reconnect (I suspect to the last device it was connected with, but am not sure about that - I can test it if you like).
But even if you switch it off and back on, there is no need to pair again: it just starts searching for paired devices and connects with one of them (alas, no choice regarding what device it connects with, but it does seem to prefer Nokia devices over HTC ones).
The first connection it makes is as a headset (only calls are routed throught it, other sounds still come from the HTC). After pressing another button it also connect as an A2DP device and all sounds from the HTC are routed to it.
Jörg

Softbank X01HT - Two bluetooth devices at once?

Hello all,
I was just curious. Im considering purchasing an external bluetooth GPS receiver and running TomTom on my device when im driving.
I also currently use a bluetooth handsfree device.
Am i able to use both bluetooth devices?
I have no problems connection a bluetooth GPS (Holux 236) and a handsfree device (Nokia HS12W) together (and using them at the same time).
HTC branded TYTN.
Only downside might be in the way the applications address the display. Nokia Smart2Go doesn't seem to like the phone application interrupting it... (it works, but phone application doesn't show)
Jörg
V J said:
I have no problems connection a bluetooth GPS (Holux 236) and a handsfree device (Nokia HS12W) together (and using them at the same time).
HTC branded TYTN.
Only downside might be in the way the applications address the display. Nokia Smart2Go doesn't seem to like the phone application interrupting it... (it works, but phone application doesn't show)
Jörg
Click to expand...
Click to collapse
TomTom works fine with the phone.

[Q] Bluetooth auto connect

I can't see any option anywhere in my SGS2 to set a BT paired device as "authorized". Every time I enter in my car I've to manually select the BT device and start manually the connection.
I searched in the forum but didn't find answers.
I also tried to look at the filesystem and I found auto_pairing.conf file in which there are a lot of BT manufacturer brands listed in sections like "black list", "white list", .... Is it possible I need to manually modify this file to include my BT manufacturer in the white list section? It sounds really strange!
Is there any other way?
I'd love to know that as well.
I atlculay lvoe my sumnasg glxaay s2 wtih VliaRionlm mroe tahn my xobx
Update
I manually modified auto_pairing.conf file adding my car BT manufacturer without any success (I added it in white list with the name already mentioned in the file, so I think that's not a problem of brand name).
My SGS2 continue to ask me to manually select the device to connect to, even if only one BT device is available (car handsfree).
I have the same problem, which i didn't have with my Nexus One running Cynogenmod ROM. I keep my Bluetooth on all the time or most of the time and i would like (like i had in nexus one) when i turn on my car (with Sony MEX-BT3700U car stereo with Bluetooth) that the phone auto-connects with the stereo in a minute or less (or with my plantronics headset when i turn it on), but no, every time i have to go into bluetooth settings and connect on the paired device and then it's connected.
I heard about few application that could help but it would be nice to have it as native function on the phone. I haven't tried these apps yet but if anyone want's to try they can be downloaded from the market, firs is free, the second is not.
https://market.android.com/details?id=a2dp.Vol&feature=search_result
https://market.android.com/details?id=com.btautoconnect&feature=search_result
If anyone can help it would be greatly appreciated
I don't have this problem at all, on any ROM I've tried stock or not. Is your stereo also set up to auto-connect? And is it your phone or your stereo that's refusing the auto connection?
mudferret said:
I don't have this problem at all, on any ROM I've tried stock or not. Is your stereo also set up to auto-connect? And is it your phone or your stereo that's refusing the auto connection?
Click to expand...
Click to collapse
Stereo doesn't have any options, same as Plantronics headset (only ON or OFF), that means that with my old nexus one running CM (or Nokia n95 8GB) when the bluetooth is switched ON and i come near stereo or headset they connect automatically in about 30 seconds max, with my SGS 2 that doesn't happen, i tried everything but it wont auto-connect until i initiate the connection from phone manually.
I have to resolve this because it's killing me !
jartukovic said:
Stereo doesn't have any options
Click to expand...
Click to collapse
I wonder if that's the issue; IIRC it's my stereo that I've told to connect automatically rather than my phone. I'll verify on my commute home today.
Mine auto connects to my JVC car head unit, but doesn't to my Belkin Tunestage. No idea why. As it happens, this suits me but it'd be nice to be able to control it.
And the commute begins. The auto connection is an option on my JVC deck, no such option on the phone.
Sent from my GT-I9100 using XDA App
mudferret said:
I wonder if that's the issue; IIRC it's my stereo that I've told to connect automatically rather than my phone. I'll verify on my commute home today.
Click to expand...
Click to collapse
The stereo is recognized same as Plantronics and that is as a head set, but it doesn't want to automatically connect to either of them, every time i have to initiate the connection. There is one way to connect it (partially automatically ) but that's not the solution - i have to turn on the bluetooth on my phone before starting my car, then when phone is in searching mode if the car is started (stereo turned on) then it will connect automatically, if the search mode (that is active for a short time after turning the bluetooth) ended before i start the car (for instance if i keep my bluetooth on all the time on my phone) then it wont connect automatically.
Am i any clearer about my problem ?
I hear what you're saying but it appears that auto connection is initiated by my stereo. If I turn auto connect off on my stereo there is no connection until I tell my phone to connect. I don't see anything on the gsii settings to have the phone auto initiate the connection. I have a recent JVC deck fwiw.
Sent from my GT-I9100 using XDA App
I will check one more time is there any bluetooth settings on my car stereo, but i'm 90% sure that it doesn't have, because this is the first phone that doesn't connect automatically.
I have had similar issues with mine, it will pair with my Kenwood DNX520VBT but wont auto connect.
however i now have a workaround
Turn bluetooth on your GS2 first, then turn on you Radio. once my Radio boots up it initiates the connection and auto connect works.
if i turn on the bluetooth on my GS2 after my radio it never works.
ive got a sony bt3700 stereo, it connected perfectly with my samsung wave, i just upgraded to a galaxy s and i have to do it manually every time so its not the stereo.
Same thing happened to me, old nexus one with CM7 is connecting ok but i have to connect SGS2 manually or make sure that my bluetooth is ON on my phone before i start the car.
I may have the answer......
Hi,
I have a sort of work around.
My Pioneer head unit refuses to auto connect to my SGS2 and I have to do it manually (I connect from the radio in 4 clicks but thats not the point). This was driving me nuts as previous handsets I owned connected within 5 seconds of being in the car.
I then discovered ROMS and went for the Criskelo ROM and it put me on Android Version 2.3.6 (Not sure if that made a difference or its actually the ROM).
Now with that sorted I found that I have an extra function in my bluetooth settings. When I make the device visible I can then choose the visible time-out length. If I set this to NEVER then I have no problems connecting to the headunit everytime I get in my car.
The only problem I have with this is that I pop my phone into Airplane Mode each night and because that disables the bluetooth it loses the time-out setting so I have to put the time-out back to never each morning.
With setting the time-out to never I'm not sure what battery drain is like because I'm constantly on my phone and my battery depletes rapidly anyway but it seems like a fix for now.
I hope this makes sense and helps people out until a proper fix becomes available.
Cheers,
DJ Sploits
Hi All,
Sorry for bumping an old-ish thread, but it seemed the most appropriate thread, and better than creating a new one of the same topic!
This is what I believe to be true:
*IF* Bluetooth is enabled on the GS2 (and the phone has previously been paired with the car headunit) then when the car is turned on, it will auto-connect to the GS2
*IF* Bluetooth is NOT enabled on the GS2 (and the phone has previously been paired with the car headunit) then when the car is turned on, it will NOT connect to the GS2 (understandably!).
*IF* the phone has previously been paired with the car headunit, and the bluetooth on the GS2 is enabled *AFTER* the car has been started, it does NOT Auto-Connect.
From this, I assume that when the car is powered on, it searches for previously paired handsets in order of most recently connected first. If it finds one, then it WILL connect.
Now:
If I leave Bluetooth enabled on my phone, the battery is significantly depleted my mid-afternoon.
I've started using an app which uses the "rough location" (not GPS) to monitor where the phone is located. If it deemed to have moved in X period of time, then it enables bluetooth.
This is great, and works a charm ... BUT it does mean that bluetooth stack on the GS2 is enabled AFTER the car has been moving for a period of time, and thus does NOT auto-connect.
What I've been searching for is:
"When BT stack is enabled on GS2, can it look for previously paired devices and initiate the connection itself?" (Rather than the car connecting to it?) Is there a script or app to do this?
Hi WTFH,
I think it might be more headunit specific. I always have my bluetooth on but it wont connect automatically to my headunit unless I have it set to constantly discoverable (on the handset).
I also use a power saving program called Green Power Premium which will cut bluetooth/data/wifi after a certain amount of time when the phone is in a sleep state. Its great fro saving power as my phone isnt constantly looking for a wifi signal (I don';t use it to control my bluetooth though as I need it on for my car).
Hey DJ_sploits,
Thanks for that ... Yes, I understand that some headsets do not auto-connect to the GS2 if the phone is NOT visible.
But what does seem to be constant is that the GS2 will not auto-connect to any of the headsets if the bluetooth stack on the GS2 is enabled AFTER the headset has come online and available.
One workaround I'm thinking of is:
Enabling a profile which says "When connected to a power source (I'll have to use the power adaptor) then enable bluetooth". Connecting my phone to the power first before starting the car should enable the BT stack before the headset tries to connect.
In fact I could extend this to say "Only enable bluetooth when using power adaptor, and not connected to wifi".
It's still a pain to do this though, as I tend to just jump into the car and don't want to faff about with connecting this and that.
The only other work around I use is to set the visiblity to constant (depending on what android software version you are on). My headunit always picks the phone up if I have it setup like this. the only thing with that is it will eat the battery even more (which is annoying considering there are other phones out there that constantly have their bluetooth on and you never see the battery getting hammered).
The only flaw I can see in your method is the fact you need a power source to knock on the bluetooth. Great for powersaving but it would then mean you would have to remember to connect it to a car charger everytime you got in the car (not too bad if you have it constantly plugged in to the cigarette lighter) and as you set this can be a bit of a faff.
The only way I can see in sorting this is using a power saving app but having your visibilty constantly on for the bluetooth and then we just hope it doesnt eat the battery too much (not to bad for me as I have a charger at work but could be a pain for others). The only problem with this (apart from the battery issue) is that if you knock the bluetooth off or knock the phone to airplane mode (as I do at nights) then when you knock the bluetooth back on it forgets that you want it to be constantly visible so you have to go through the settings and check the box

[Q] One click connect to *specific* Bluetooth device? [NFC Automation]

Hi All,
I have an NFC enabled Samsung Galaxy Nexus and have placed NFC tags in specific places (car, living room, home theater, bedroom, etc.) so that I when I set my phone on the NFC tag I can automatically play music over Bluetooth in that location.
I am trying to completely automate connecting to a *specific* Bluetooth device. (I am not looking to simply toggle Bluetooth on or off, or select the desired Bluetooth device from a menu.) I am currently using "NFC Task Launcher" to accomplish the majority of this, but as far as Bluetooth is concerned, the most I've been able to automate so far is to simply Bluetooth on or off. (I also tried "Tasker" but the functionality I am looking for is missing from this app as well.) I have not found a way to read an NFC tag and automatically connect to a specific Bluetooth device based on which tag is read, nor have I even found a "one click" app / widget that connects to a specific Bluetooth device. (If such a "one click" app / widget exists, I could automate the launching of that app to make the connection.).
(Also having the Bluetooth device in each location initiate the connection isn't a viable solution, I need for the phone to iniatiate the connection.)
Does anyone have any suggestions? Thanks in advance!
Ran across this looking for the same answer. Surprised no one has responded in over a month here.
Did you have any luck finding a workaround for specific BT device connections?
Hi,
I am the developer of MacroDroid an automation application for Android (that supports NFC tags).
This is a feature one of my users has just requested, so I'm just starting to look into the feasibility of adding it. (I came across this post during my initial research).
I will report back here on what I find and if all goes to plan I'll get the feature added to MacroDroid ASAP.
In the meantime, I'd appreciate ALL feedback (positive and negative) with regards to MacroDroid as I hope to make it as powerful and flexible as possible. It's available on Google Play here:
https://play.google.com/store/apps/details?id=com.arlosoft.macrodroid&hl=en
Cheers,
Jamie
Just a quick follow up to my last post.
I believe it is possible to implement functionality to connect to a specific device. I currently don't have an appropriate device to test this, but I have one on order. As soon as I receive it, I'll have a go at adding this to MacroDroid.
In the meantime the following app on the market:
https://play.google.com/store/apps/details?id=a2dp.Vol&hl=en
Has the capability to connect to a second Bluetooth device when a Bluetooth connection is established. This may or may not help depending on what you are doing.
Any update on this? I'm also in the same boat. My car doesn't automatically connect anymore, never really did, I think its Bluetooth > 3.x on phone( 4.0 right now, but same on older past devices on S3 ) and the stereo bluetooth is older version( can't remember exactly. )
Anyways, thanks dev for posting about the other app, plan on trying it out tomorrow. In the meantime have you made any progress on your app for this functionality? I'd rather keep everything( all settings ) in one app if I can. Don't think Tasker allows this still, not sure on locale but I doubt it also.
Eagerly awaiting an update
A few more options
Did a little more searching just in case anything new has been released recently - came up with a few new options.. None seem to suit my need (trigger connection within Tasker via a plugin or directly opening an app), but posting here since they may help others.. I haven't tried these - just going on app descriptions.
So, in addition to A2DP Volume as suggested by UndeadCretin, which would be the best option if you want the connection to a A2DP device when another BT device connects, there's also Car Music Connector (https://play.google.com/store/apps/details?id=com.cleansoft.carmusic) which would seem to fit the bill for most people perfectly. Free, and "Connects you device to Bluetooth stereo in one widget click or NFC tap." Downside would seem to be that it would need to be set as default NFC app for one tap NFC triggering.
If just a widget is needed, Bluetooth Autoconnect (https://play.google.com/store/apps/details?id=com.btautoconnect), which is a paid app - although Car Music Connector also has a widget so is probably a better (and free!) choice.
Edit: Scratch that.. Car Music Connector doesn't prompt for a device to connect to.. I only have 1 A2DP device paired, and it wont connect to it (just times out) - maybe someone else will have better luck.
Bluetooth Autoconnect seems like it should work, however it enables/disables bluetooth at the same time - so if you already have bluetooth turned on, it turns it off. <sigh>
I'm unable to get it to connect to the either of 2 A2DP devices though - emailed the Dev hoping that it's just something funky with my device (Galaxy S3) that can be worked around.
Interested in this as well.
Firstly sorry for the long delay in replying!
I have now added the ability in MacroDroid to connect to a specific Bluetooth audio device. I have it working on my 2.3 and 4.0.4 and 4.1 devices but I only have a single audio device to test against. Some users have reported that it's not working for them, so if anyone does try this I would appreciate any feedback if it works or doesn't. If it's not working for you could you please tell me the device, OS version and device you are trying to connect to. Feedback here is fine, or mail me at: [email protected]
Best Regards,
Jamie
UndeadCretin said:
I have now added the ability in MacroDroid to connect to a specific Bluetooth audio device.
Click to expand...
Click to collapse
Awesome to hear.. I'll give it a test run when I get a chance and get back to you with results.. Just a query - what's the system resource usage of MacroDroid? I currently use Tasker, and am more than happy to buy and use MacroDroid for this one single function if it works, but don't really want them both running in the background at the same time if they're using up resources.. Can MacroDroid be setup to only run when called (i.e. having a shortcut trigger it, or even better via a Locale plugin?) I know that this is probably wanting a little too much
For others, Bluetooth Auto Connect (https://play.google.com/store/apps/details?id=org.myklos.btautoconnect) has had a recent update of "New: Tasker/Local plugin - new Profile action added - Connect / Disconnect actions supported" which sounds promising.
I never got the app to work previously (it just never connected), but others may have better luck. I haven't tried it since the update.
Kaibosh said:
Awesome to hear.. I'll give it a test run when I get a chance and get back to you with results.. Just a query - what's the system resource usage of MacroDroid? I currently use Tasker, and am more than happy to buy and use MacroDroid for this one single function if it works, but don't really want them both running in the background at the same time if they're using up resources.. Can MacroDroid be setup to only run when called (i.e. having a shortcut trigger it, or even better via a Locale plugin?) I know that this is probably wanting a little too much
For others, Bluetooth Auto Connect (https://play.google.com/store/apps/details?id=org.myklos.btautoconnect) has had a recent update of "New: Tasker/Local plugin - new Profile action added - Connect / Disconnect actions supported" which sounds promising.
I never got the app to work previously (it just never connected), but others may have better luck. I haven't tried it since the update.
Click to expand...
Click to collapse
The resource usage of MacroDroid should be very low as it is effectively dormant in most cases. MacroDroid does run as a foreground service so it displays a persistent icon in the notification bar. If this annoys you there is an option in settings to turn off the foreground service. In most cases it will still work but YMMV. Anyway you can get the basic functionality for free, so you can give it a try and see how it works for you.
Regards,
Jamie
I have just submitted an updated (V1.3.8) that will hopefully solve the issue some users were seeing with the Bluetooth audio connection. I appreciate any feedback if it works (or not) for you....
Car Music Connector
Hello,
In addition to A2DP profile Car Music Connector waits for Headset profile to be connected by default. This is more reliable for most car bluetooth enabled stereos. If you are using it with A2DP only device you need to disable "Wait for Headset Bluetooth connection" in settings.
Hope that helps.
Alexander Shakhov.
Car Music Connector author.
An amazing One click - Connect 2 Specific Bluetooth device for A2DP and Phone app:
Bluetooth Pair
https://play.google.com/store/apps/details?id=com.gnssoftworks.bluetoothpair
found it very useful for swapping bluetooth headphones between devices WITHOUT turning off Bluetooth entirely or going into the settings menu.
Example Use Case:
I have one Stereo Bluetooth headset with mic (two profiles - phone and A2DP audio)
I have one Android Phone and one Android Tablet.
Phone Profile is always connected to the Android Phone, but the A2DP audio changes depending on which device you want to listen to music from.
Normally, if you want to listen to audio from the Tablet when your headset's A2DP profile is connected to the phone, you'd have to first go to the settings menu of the phone, and disconnect the A2DP, leaving Phone Profile connected. Then go to the settings menu on your tablet and connect the A2DP only.
Then you'd have to do the opposite if you want to listen to audio from the Phone again.
Takes a long time.
With Bluetooth Pair, you can specifically connect or disconnect to a specific device and specific profile (phone / a2dp) by widgets.
So you won't have to turn off the bluetooth completely on one device just to allow your headset to connect another device. Nor do you need to go into settings anymore.
1.) Just tap on the A2DP device specific widget on the phone to disconnect, the A2DP Profile from the phone
2.) go to the Tablet, and tap on the A2DP device specific widget to connect the A2DP profile of the headset to the Tablet
Two taps!
klau1 said:
An amazing One click - Connect 2 Specific Bluetooth device for A2DP and Phone app:
Bluetooth Pair
https://play.google.com/store/apps/details?id=com.gnssoftworks.bluetoothpair
found it very useful for swapping bluetooth headphones between devices WITHOUT turning off Bluetooth entirely or going into the settings menu.
Example Use Case:
I have one Stereo Bluetooth headset with mic (two profiles - phone and A2DP audio)
I have one Android Phone and one Android Tablet.
Phone Profile is always connected to the Android Phone, but the A2DP audio changes depending on which device you want to listen to music from.
Normally, if you want to listen to audio from the Tablet when your headset's A2DP profile is connected to the phone, you'd have to first go to the settings menu of the phone, and disconnect the A2DP, leaving Phone Profile connected. Then go to the settings menu on your tablet and connect the A2DP only.
Then you'd have to do the opposite if you want to listen to audio from the Phone again.
Takes a long time.
With Bluetooth Pair, you can specifically connect or disconnect to a specific device and specific profile (phone / a2dp) by widgets.
So you won't have to turn off the bluetooth completely on one device just to allow your headset to connect another device. Nor do you need to go into settings anymore.
1.) Just tap on the A2DP device specific widget on the phone to disconnect, the A2DP Profile from the phone
2.) go to the Tablet, and tap on the A2DP device specific widget to connect the A2DP profile of the headset to the Tablet
Two taps!
Click to expand...
Click to collapse
Awesome! Gonna download it now and try it in the morning... but ya still get the thanks regardless of how it works for breathing life into this thread

OBD II devices

Both Bluetooth and Wifi OBD-II devices are supported by our headunits. Keep in mind that you get what you pay for with these devices and the cheap ebay ones aren't very reliable
OBD devices are only detected if broadcasting name contains OBD. There is a work around using petrows CarService
Please report back any that work for you
Wifi
- VGate iCar 2
Bluetooth
-
Wired (USB)
-
Note: If connecting to wifi device, you'll lose you access to the internet (wifi/3g)
Curious about how to resolve the problem I have with OBD.
I use an OBDLink LX, which is far and away one of the best you can use. Not a cheap Chinese knock-off and it has specific support in both Torque and Dashcommand.
On my MTC KLD unit, Torque detects the OBD device just fine. Torque just works with it, I didn't have to do anything.
However, Dashcommand does not reliably detect it. Dash Command is enumerating devices differently somehow, and just shows "paired device" for everything. I was able to randomly choose one once, and it worked. The next time, it wouldn't work on either one. I would MUCH prefer to use Dash Command, as Torque gives me wildly inaccurate readings (MPG, HP, Torque, all are way off despite using accurate profile information). Dash Command tech support insulted me by simply responding to read the user manual PDF.
Any ideas?
I've just got a "LUJII Mini OBD2 ELM327 V1.5 Bluetooth Car Scanner". Works ok with my phone, and in the Bluetooth menu it seems to pair. But then Torque says it is not paired even though I have the OBD sign in the top status bar.
Need to force the pairing inside of the torque app by selecting which OBD device and then it works ok.
lotherius said:
Curious about how to resolve the problem I have with OBD.
I use an OBDLink LX, which is far and away one of the best you can use. Not a cheap Chinese knock-off and it has specific support in both Torque and Dashcommand.
On my MTC KLD unit, Torque detects the OBD device just fine. Torque just works with it, I didn't have to do anything.
However, Dashcommand does not reliably detect it. Dash Command is enumerating devices differently somehow, and just shows "paired device" for everything. I was able to randomly choose one once, and it worked. The next time, it wouldn't work on either one. I would MUCH prefer to use Dash Command, as Torque gives me wildly inaccurate readings (MPG, HP, Torque, all are way off despite using accurate profile information). Dash Command tech support insulted me by simply responding to read the user manual PDF.
Any ideas?
Click to expand...
Click to collapse
same problem for me on my kld 3066 Torque is paired and working immediatly.
dashcommand pair OBDII BT device but always don't connect, i just found that OBDII connect to dashcommand 80% of the times if I force dashcommand to close from Apps list and that I restart the App
I write lot of mails to dashcommand about this problem (also because i buy), ...I send Debugs and so...but I still with the same problem
Am I gonna also lose connection to may hands free bluetooth if I get a bluetooth one?
I never had one of those and would like to know which one you recommend for a Rk3066 HU
Thanks.
I got this one off amazon and for 11 bucks it works 99% of the time. The only issue I have had is it reads wrong codes on Subaru but works fine on Toyota, Nissan and Kia so far.
Cant post links but this is close
amazon /gp/product/B00PJPHEBO?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00
Hi all.....
I've got a SCANTOOL OBDLink LX connected to my AUDI S3 8P, and it's the fastest BT dongle i've ever seen.....it make about 45 Fps, when china's ELM make 10 Fps.....
Unfortunatly, the TP 2.0 protocol isn't available with a standard ELM327.....you just access to generic PIDs, so it's limited.....i'm working on it.
I also try a WBH BT5 dongle, witch should read the TP 2.0 with TORQUE......at the moment, i can't access to my ECU MED9.1 (but i can on KWP1281 EDC15P), i'm working on it too, with florian Help...
To paired with the WBH BT5, you need to override in Xposed MTC the dongle string name, and it work fine.
BR
SKOLS
Excellent product. http://www.amazon.co.uk/Pumpkin-Interface-Wireless-Diagnostic-Scanner/dp/B011O69946/
Mr Bigglesworth said:
I've just got a "LUJII Mini OBD2 ELM327 V1.5 Bluetooth Car Scanner". Works ok with my phone, and in the Bluetooth menu it seems to pair. But then Torque says it is not paired even though I have the OBD sign in the top status bar.
Need to force the pairing inside of the torque app by selecting which OBD device and then it works ok.
Click to expand...
Click to collapse
As an update, since I remove carservice this works much better, no need to force pairing everytime.
cimbike said:
Am I gonna also lose connection to may hands free bluetooth if I get a bluetooth one?
Click to expand...
Click to collapse
No you can bluetooth to more than one device at a time.
Anyone using VGate iCar v2 or v3 BT version? I wish to have one of these as they have automatic sleep mode so you can keep it plugged all the time without batt drain.
So I've tried both this adapter http://www.amazon.com/gp/product/B014MV03KY?psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00 and this adapter http://www.amazon.com/gp/product/B005NLQAHS?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
And I can't get either of them connect to bluetooth. They both show up when you search for the adapter, but neither of them connect. They don't even give me the option to put in the PIN to have them connect. Has anyone ever had this kind of issue? If so what can I do to fix it?
SKOLSC said:
To paired with the WBH BT5, you need to override in Xposed MTC the dongle string name, and it work fine.
BR
SKOLS
Click to expand...
Click to collapse
What module do you use to override the name? I need to do this too for my Kiwi3 but I can't find the relevant settings anywhere.
countbuggula said:
What module do you use to override the name? I need to do this too for my Kiwi3 but I can't find the relevant settings anywhere.
Click to expand...
Click to collapse
Correction - I found the settings page finally - apparently I hadn't actually enabled xposed MTC. Once it was enabled and rebooted, I still haven't been able to get the device to show up at all in the bluetooth settings. I've tried:
K
k
Kiwi
KIWI
Kiwi 3
3
kiwi
KIW
kiw
Kiw
as well as leaving the field blank. Still nothing in the bluetooth settings. I can confirm that the device is on and connectable from my phone. Am I doing something wrong?
has anyone found an adapter that plays well with mtcb decks and 2001 f150's? i've tried 3 adapters and still haven't gotten one that does both. either the connect no problem to my deck but not to the ecu or they connect to ecu but its named "chx" instead of obd and won't connect to my deck. i did try using the xposed module to override but it never worked for me either.

Categories

Resources