I have S 2 ,
I have flashed this ( I9100XWLP7_I9100OJVLPB_ARB ) with PIT ( android_fastboot_emmc_full_p4_16G_32G ) after that my phone goes dead , NO Respond , Even no charging as well , , , is there any solution ?
Regards
Never ever flash a PIT (unless your phone is 99% borked and flashing a PIT is that 1% chance of getting it running again). Bit late for you, obviously.
If you can't get into download mode, you might as well try a jig (but very unlikely to get you into download mode), so it's either service center or possibly a JTAG repair by a non-Samsung repairer.
auck2me said:
I have S 2 ,
I have flashed this ( I9100XWLP7_I9100OJVLPB_ARB ) with PIT ( android_fastboot_emmc_full_p4_16G_32G ) after that my phone goes dead , NO Respond , Even no charging as well , , , is there any solution ?
Regards
Click to expand...
Click to collapse
That my friend is called a hard brick. A jtag or you can try to send it to samsung and see if they will fix it
Sent from my GT-P7510 using xda premium
how can you flash wrong pit, where did you get the pit file, the fact it said 32g shouldve rung alarm bells for you!!!
As far as im aware, there is only one s2 pit file used by samsung on gb and ics for the 9100, it does come with most roms in case you need it.
In fact what youve flashed is a Galaxy Tab .pit file, if you cant get back into DL mode with a jig then youve had it im afraid, im not even sure samsung would repair this as its not a 9100 file you flashed.
---------- Post added at 12:28 AM ---------- Previous post was at 12:17 AM ----------
Here is rescue video
http://www.youtube.com/watch?v=GLryErBgdTE
good luck, hope you can revive it.
MistahBungle said:
Never ever flash a PIT (unless your phone is 99% borked and flashing a PIT is that 1% chance of getting it running again). Bit late for you, obviously.
If you can't get into download mode, you might as well try a jig (but very unlikely to get you into download mode), so it's either service center or possibly a JTAG repair by a non-Samsung repairer.
Click to expand...
Click to collapse
Thanks everyone ,
I tired mostly everything and still does not wakes up , still no power no screen and even when I connected to the PC I don't heard the sound ( Totally Dead ) .
Jig I will try to search about that , I dont know what is it .
Thanks again guys .
auck2me said:
Thanks everyone ,
I tired mostly everything and still does not wakes up , still no power no screen and even when I connected to the PC I don't heard the sound ( Totally Dead ) .
Jig I will try to search about that , I dont know what is it .
Thanks again guys .
Click to expand...
Click to collapse
Search on ebay or something for USB jig. They cost 1-2 dollars. Any more and consider it expensive.
As said above, a jig will probably not work meaning your only option is to send it to samsung for repair or to get a JTAG.
In fact the correct pit file was : u1_02_20110310_emmc_EXT4.pit
But you select for P7500 which was a galaxy tab 10.1 pit
Related
My phone is 100% bricked, I was flashing blitzkrieg bootloader to flash his ROM and something went wrong.
Now my phone wont turn on, wont nothing. . .
So the Question is: has anyone went out of this? I now the jig method, but I searched and didnt find anything.
eif you borked the bootloader there is a good chance there isnt much you can do besides a jtag reset, now a jig wouldnt hurt to try but i wouldln't count on it working. i personally will always stay away from bootloaders until i get my own jtag rig.
Goodluck bro hopefully the jig works.
if the vibrant is originally yours you could make a warranty claim with samsung stating you were attempting to flash 2.2 through keis and your phone wont work now, otherwise like said jig maybe, Jtag almost assuredly, will fix your phone.
If you are actually considering a JTAGing, search in the forum for connexion2005. He have lots of experience doing it and have a website and everything.
Its sad, but you remembered me why i shouldn't mess with the bootloader. Goodluck with your phone bro...
What happened during the bootloader flash? I just flashed the GB bootloader and the whole process was over in less than 10 seconds, not much room for error..
anthonys2r said:
What happened during the bootloader flash? I just flashed the GB bootloader and the whole process was over in less than 10 seconds, not much room for error..
Click to expand...
Click to collapse
I do not why (dont ask) I added the stock .pit file! ... i think there was the error...
anthonys2r said:
What happened during the bootloader flash? I just flashed the GB bootloader and the whole process was over in less than 10 seconds, not much room for error..
Click to expand...
Click to collapse
I am actually considering a Jtag, but I'm in México so I had to find someone who does that here. . . actually only found 2 people lol
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
shreddintyres said:
eif you borked the bootloader there is a good chance there isnt much you can do besides a jtag reset, now a jig wouldnt hurt to try but i wouldln't count on it working. i personally will always stay away from bootloaders until i get my own jtag rig.
Goodluck bro hopefully the jig works.
if the vibrant is originally yours you could make a warranty claim with samsung stating you were attempting to flash 2.2 through keis and your phone wont work now, otherwise like said jig maybe, Jtag almost assuredly, will fix your phone.
Click to expand...
Click to collapse
I couldn't agree more with everything in this post. Nice community situation here
- The Samsung Kies killed my phone excuse has gotta be the ultimate life saver, but over time I'm starting to agree with others that it's probably not something I should endorse. As I root more and more of my friends devices I'm starting to find that 1) I hate them. and 2) NOBODY will read an OP all the way through!
kawika said:
As I root more and more of my friends devices I'm starting to find that 1) I hate them. and 2) NOBODY will read an OP all the way through!
Click to expand...
Click to collapse
I thought i was the only one who felt that way about my friends!! Really how hard is it to read a op!
kawika said:
I couldn't agree more with everything in this post. Nice community situation here
- The Samsung Kies killed my phone excuse has gotta be the ultimate life saver, but over time I'm starting to agree with others that it's probably not something I should endorse.
Click to expand...
Click to collapse
I wholly agree with you that this method is something that should be avoided if at all possible, however I know jtag services can be hard to find as well as sometimes quite costly.
@op let us know how it all turns out for you
-Cheers
Sent from my SGH-T959 using XDA Premium App
Your battery probably died.
You dont have to flash a pit with it because it uses the phones native pit when flashing the bootloader.
Also, the OP for the gb Bootloader states that it CHANGES the key mapping. volume up and power gets you dl mode. Try that before jtag. I had this problem trying to flash the rom because i couldnt figure out recovery. Turns out I didn't read it right. I read it through, just didn't interpret it correctly.
PabxH said:
My phone is 100% bricked, I was flashing blitzkrieg bootloader to flash his ROM and something went wrong.
Now my phone wont turn on, wont nothing. . .
So the Question is: has anyone went out of this? I now the jig method, but I searched and didnt find anything.
Click to expand...
Click to collapse
As mentioned I'm able to JTAG your phone back to life as well as any other bricked Vibrants. PM me if you need any help with this...
plug usb cable and press vol up+vol down.. then use odin.. samsung phones are never bricked..
movieaddict said:
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
Click to expand...
Click to collapse
omg thank you for that i thought my phone was BRICKED and hten i was soo sad so i was looking through hte post andd i saw ^^^that one and i thought it wont hurt to try one last time so i did and it worked
very unfortunate to tell u i m also suffering same problem and dont hav idea abt jtag.. plz let me know i know abt odin cwm kies update processes will used them b4.. but watz jtag
movieaddict said:
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
Click to expand...
Click to collapse
Thank You so much. I was trying to flash back to stock using odin and forgot to put in the pda file. I was only using pit and it bricked. No download mode, left it off for hours, pure blackness. Until I tried your method of plugging in the usb and holding the volume buttons then plugging in the battery. Thank you.
Fazeh said:
Thank You so much. I was trying to flash back to stock using odin and forgot to put in the pda file. I was only using pit and it bricked. No download mode, left it off for hours, pure blackness. Until I tried your method of plugging in the usb and holding the volume buttons then plugging in the battery. Thank you.
Click to expand...
Click to collapse
Great news and nice tip from the OP. However, if that tip works, you were not fully hard bricked...
Ok, last update: I got it repaired!
JTAG was the only solution for this.
My phone was:
DEAD, NO SCREEN BOOT UP NO NOTHING
NO REACTIONS AT ALL
NO BATTERY CHARGING IMAGE
NO NOTHING!!! JUST A TOTAL BRICK.
Thank you all!!
Glad to hear you got it sorted out be careful flashing those boot loaders
Sent from my SGH-T959 using XDA Premium App
bricked my phone vibrant
I faced the same issue when my phone got bricked.
1. odin back to jfd
2. GB bootloader installed.
3. updated to 2.2 froyo via kies...
after that the phone never turned onn...BRICKED...
sending it to connection2005 for JTAG...
hope that resolves the issue.
Hi Folks,
after trying to flash the SGS-2, the phones screen is still black and doesnt
get powered on by pressing the power button, no boot, no screen. Odin dont
know about the phone - no usb connection
any suggestion what i can do?
Recovery mode or download mode ?????
jje
JJEgan said:
Recovery mode or download mode ?????
jje
Click to expand...
Click to collapse
no, nothing. still black screen / no power.
i think, my mistake was a wrong .pit - i was using the 512.pit, i'm a sgs2 noob ^^
afaik, you do not flash PIT for this phone, ever.
Try removing the battery, then turning on, download mode, recovery etc. If that doesn't work, you're screwed.
Try purchasing a jig. To be honest though, it sounds hard bricked. When you plug it into a power source and try to power it on if nothing at all happens that's usually a bad sign.
To offer you saving point, there are two or three places on the web that offer Jtag services which rewrite the default boot loader.
What were you doing when this happened?
Did the flash complete successfully?
These things are hard to brick although not impossible.
Edit: Oh, just saw the pit reference. Ouch, you are going to need Jtag, friend.
andy572 said:
no, nothing. still black screen / no power.
i think, my mistake was a wrong .pit - i was using the 512.pit, i'm a sgs2 noob ^^
Click to expand...
Click to collapse
Dead as a dodo, jtag or RMA and hope they don't notice, say it was a failed kies flash or something.
andy572 said:
no, nothing. still black screen / no power.
i think, my mistake was a wrong .pit - i was using the 512.pit, i'm a sgs2 noob ^^
Click to expand...
Click to collapse
No instructions to flash a 512 PIT file for the SGS1 phone its a totally different PIT.Same as putting the wrong fuel in the tank .
jje
You won't be debrick it at home, only JTAG equipment can help you now. Either send it to a Samsung Service center, tell them you were updating through Kies and hope they don't notice or find a Repair Service with JTAG equipment and have them debrick it.
i wonder something why is a 512.pit file in the update pack (was rar compressed) as the FW is for SGS-2 but not SGS-1 ?!
tomorrow i send the phone to the service center, i can say it was a failure in kies - most pplz are writing this and dont have to pay something^^
andy572 said:
i wonder something why is a 512.pit file in the update pack (was rar compressed) as the FW is for SGS-2 but not SGS-1 ?!
tomorrow i send the phone to the service center, i can say it was a failure in kies - most pplz are writing this and dont have to pay something^^
Click to expand...
Click to collapse
You should ask the person who put it in the firmware pack... I haven't seen any downloads on XDA which contain the 512.pit file. Infact if you would've taken the time to read up on some threads here at XDA you would've known most experienced users advise and actively warn against using a pit file.
andy572 said:
no, nothing. still black screen / no power.
i think, my mistake was a wrong .pit - i was using the 512.pit, i'm a sgs2 noob ^^
Click to expand...
Click to collapse
Bricked! You'll need to get it repaired by Samsung or some place with a JTAG box.
thanks for all answers here
i dont have downloaded the firmware from xda but from samfirmware.com and a wrong odin version with that **** pit file ...
... and readed the wrong tut about flashing a SGS-2 - think this was the most mistakes i've made ...
now its realy bricked and i'll see if i can send to a service center tomorrow.
i hope repair is for free ...
Hi all!
Firstly I wanted to apologize if I do not post in correct area.
I have a big problem,I put on fit a home bussiness with update software for the GS2
Today somethig very strange happend to me.
I wanted to upgrade the GS2 to ICS XXPLQ I used this guide http://www.theandroidsoul.com/xxlpq/
I put put the tar file in PDA and pit512 in PIT and I hit the start button,after awhile the its tells that the operation failed.
I pulled out the battery,and when I wanted to start the phone,nothing happed,it won't start,I tryed eved with an OTG cable,but there is nothing to do. he won't start,I just don't know what to do...there is hardaware problem?
Please I despertly need your help.
Did you really develop this?
Sent from my GT-I9100 using xda premium
Why did you put pit512 file in PDA section? Boot in download mode and flash rom again.
It won't boot
It is just death,no matter what I do
The pit file I put in Pit area,I'm sure about this
Do you have usb jig?
cmiui said:
Hi all!
Firstly I wanted to apologize if I do not post in correct area.
I have a big problem,I put on fit a home bussiness with update software for the GS2
Today somethig very strange happend to me.
I wanted to upgrade the GS2 to ICS XXPLQ I used this guide http://www.theandroidsoul.com/xxlpq/
I put put the tar file in PDA and pit512 and I hit the start button,after awhile the its tells that the operation failed.
I pulled out the battery,and when I wanted to start the phone,nothing happed,it won't start,I tryed eved with an OTG cable,but there is nothing to do. he won't start,I just don't know what to do...there is hardaware problem?
Please I despertly need your help.
Click to expand...
Click to collapse
The hardware problem is between your ears .
One this is DEVELOPMENT post in Q&A .
Two you have followed instructions from XX forum why not ask them for advice .
Three are you sure you have i9100 phone as that PIT is not for this phone .
Likewise did you flash i9100 firmware .
You have a bricked phone .
Can you get to download mode if so flash a stock GB rom from stock rom thread to get the phone working .
No download mode two choices find a JTAG repair it will be cheaper than a Samsung repair . Alternative take to Samsung service and hope they dont charge but repair under warranty .
jje
cmiui said:
The pit file I put in Pit area,I'm sure about this
Click to expand...
Click to collapse
Here was mistake, Important! Do not touch any other button or make any other changes in Odin except selecting the required file as given in step 8. Why did you touch PIT button???
Pit.
When you flash tar you must not set pit for flashing. Remove battery for hour or more than put it back ,try to go in download mode , if that doesnt work find some usb jig to help you put the phone in download mode.
I'm sorry because posted here...and I thank you for you answer.
You may have right about the way I put the PIT file
can you please tell me where I can get the JTAG repair?
JJEgan said:
The hardware problem is between your ears .
One this is DEVELOPMENT post in Q&A .
Two you have followed instructions from XX forum why not ask them for advice .
Three are you sure you have i9100 phone as that PIT is not for this phone .
Likewise did you flash i9100 firmware .
You have a bricked phone .
Can you get to download mode if so flash a stock GB rom from stock rom thread to get the phone working .
No download mode two choices find a JTAG repair it will be cheaper than a Samsung repair . Alternative take to Samsung service and hope they dont charge but repair under warranty .
jje
Click to expand...
Click to collapse
mcnaget said:
When you flash tar you must not set pit for flashing. Remove battery for hour or more than put it back ,try to go in download mode , if that doesnt work find some usb jig to help you put the phone in download mode.
Click to expand...
Click to collapse
I used JIG usb,didn't work
cmiui said:
I'm sorry because posted here...and I thank you for you answer.
You may have right about the way I put the PIT file
can you please tell me where I can get the JTAG repair?
Click to expand...
Click to collapse
Search on google and you`ll find in you country(trebuie sa fie asa ceva la voi)
Did you really develop this?
Sent from my GT-I9100 using xda premium
PIT 512 Samsung Galaxy file only from memory its a totally different PIT for SGS2 .
jje
hi guys
i write this post after 3 hours when i read all the article and all the guide to try myself to solve my big problem..
i have try to set a custom rom on my galaxy s2 by odin..actually i have a rom based on cm10..
but during the operation..i played with my child and..i have insert the old pit file of my i9000 and not the new one of my 9100...
odin system was freezed, but i have make a error to unplug and switchoff the device...resut..black screen and bricked phone...
the problem is that i work with my phone and is a problem for me send it to the assistence...what i can do? do you have some idea that can help me?:crying:
thanks in advance
sam
sam213 said:
hi guys
i write this post after 3 hours when i read all the article and all the guide to try myself to solve my big problem..
i have try to set a custom rom on my galaxy s2 by odin..actually i have a rom based on cm10..
but during the operation..i played with my child and..i have insert the old pit file of my i9000 and not the new one of my 9100...
odin system was freezed, but i have make a error to unplug and switchoff the device...resut..black screen and bricked phone...
the problem is that i work with my phone and is a problem for me send it to the assistence...what i can do? do you have some idea that can help me?:crying:
thanks in advance
sam
Click to expand...
Click to collapse
No download mode or recovery?
Tried a USB Jig?
If none work, a JTag might save it, not sure on .pit files, whether it kills the motherboard or not.
May have to be a Samsung repair job...
themadba said:
No download mode or recovery?
Tried a USB Jig?
If none work, a JTag might save it, not sure on .pit files, whether it kills the motherboard or not.
May have to be a Samsung repair job...
Click to expand...
Click to collapse
no..don't work download mode and recovery...
i have only a black screen...
i have not with me this particular cable..my first idea now is try to found (where? tomorrow is sunday..) the Electric part and try to build myself the jig...as some guide that i have read on this forum..
the second option is try to use this jtag..but i must found some hop that make this service..the final..is assistence.. i have one year of guarantee too, but i don't know if thi guarantee is good for this kind of defects..
sam213 said:
no..don't work download mode and recovery...
i have only a black screen...
i have not with me this particular cable..my first idea now is try to found (where? tomorrow is sunday..) the Electric part and try to build myself the jig...as some guide that i have read on this forum..
the second option is try to use this jtag..but i must found some hop that make this service..the final..is assistence.. i have one year of guarantee too, but i don't know if thi guarantee is good for this kind of defects..
Click to expand...
Click to collapse
Are you happy enough to make the Jig? They can be bought on eBay for £2 (very cheap wherever you are from).
There is a website called mobiletechvideos.com, they are based in America but they deal with these types of bricks.
As I said, not sure if a bad .pit file flash kills the motherboard or not. But try the Jig first and see if there is any response.
sam213 said:
no..don't work download mode and recovery...
i have only a black screen...
i have not with me this particular cable..my first idea now is try to found (where? tomorrow is sunday..) the Electric part and try to build myself the jig...as some guide that i have read on this forum..
the second option is try to use this jtag..but i must found some hop that make this service..the final..is assistence.. i have one year of guarantee too, but i don't know if thi guarantee is good for this kind of defects..
Click to expand...
Click to collapse
Just take to Samsung Service center, just cook a good story Like the problem occurred update. It will be fix for free
Jokesy said:
Just take to Samsung Service center, just cook a good story Like the problem occurred update. It will be fix for free
Click to expand...
Click to collapse
My mate tried that once and he got turned down, his phone was also stock.
Don't always expect a lie to work, but I suppose if you don't want the hassle of trying to fix it, the repair centre is a phone call away...
themadba said:
Are you happy enough to make the Jig? They can be bought on eBay for £2 (very cheap wherever you are from).
There is a website called mobiletechvideos.com, they are based in America but they deal with these types of bricks.
As I said, not sure if a bad .pit file flash kills the motherboard or not. But try the Jig first and see if there is any response.
Click to expand...
Click to collapse
The problem is not the cost of jig cable but the time that I need to wait before receive it. I if I try myself maybe that I can save one week and, if this trick don't work, and I will send the galaxy s2 in the Samsung services...
I'm member of Samsung exclusive.. I hope to save some days..
Anyway... I hope to solve with a jig cable.. In the meantime I have found a basic smartphone from my friend.. Just to make a tethering and use my asus transformer for all the normal operation...
But.. Just for my information.. How a wrong file can generate a hardware problem in the motherboard?
I repeat...I'm really very stupid! I have make this operation a lot of times... And without attention I have make this operation yesterday... @##@#....
Thanks guys.. If some people have some extra idea... Reply me please!
Sam
You could be surprised the damage flashing wrong .pit file can do. I suppose doing what Jokesy said would be worth a try.
Sent from my GT-I9100 using xda app-developers app
Hi !
Any one can help ?
I flash my I9100 erroneously wrong PIT :crying:
The wrong was >>> Galaxy i9100G compatible PIT File > omap4_all_20110627_emmc.pit
right one is:
u1_02_20110310_emmc_EXT4.pit
Now...
No boot and phone not turn on.
Only jtag/USB Jig helps or possible to repair via usb cable ?
Some tricks or something ?
Maybe helps
http://galaxys2root.com/galaxy-s2-hacks/how-to-make-a-usb-jig-for-your-galaxy-s2/ ?
Thanks !
http://forum.xda-developers.com/showthread.php?t=1814801
If the phone & PC recognise each other via Odin, you could try flashing a full rom package with a pit.
If they don't, you're out of luck. Nothing you can do will fix it. JTAG or service centre. Take your pick.
MistahBungle said:
If the phone & PC recognise each other via Odin, you could try flashing a full rom package with a pit.
If they don't, you're out of luck. Nothing you can do will fix it. JTAG or service centre. Take your pick.
Click to expand...
Click to collapse
Phone not turn on at all.
Odin cannot detect
Is it worth a try usb jig ?
Doubt a jig will work. If you can get or make one easily (lots of tutorials on Google/here showing you how to make one), you might as well try it. But if it's going to take you a couple of weeks to get one, you're probably going to be delaying getting your phone fixed for something that has a 1% (realistically a lot less) chance of working at best.