hi,
2 days before i flashed the dell streak rom by mistake...after that i'm not able to do a recovery...
when i boot the phone it shows the dell logo...but after a few seconds it disappears and am not able to see what is going on...
when i try to enter fastboot mode...i dont get the fastboot screen at all...i cant see what ever happens on my screen...if i have to know if i am in fastboot mode i have to use commands
i dont even know when i have entered recovery even though i flashed the required items to be flashed i.e., boot recovery system
i am not able to see anything on my phone....
can u guys help me out of this or should i take my phone to the dell service center to get it rectified...
thanks and hoping for u'r reply at the earliest
terminal17 said:
hi,
2 days before i flashed the dell streak rom by mistake...after that i'm not able to do a recovery...
when i boot the phone it shows the dell logo...but after a few seconds it disappears and am not able to see what is going on...
when i try to enter fastboot mode...i dont get the fastboot screen at all...i cant see what ever happens on my screen...if i have to know if i am in fastboot mode i have to use commands
i dont even know when i have entered recovery even though i flashed the required items to be flashed i.e., boot recovery system
i am not able to see anything on my phone....
can u guys help me out of this or should i take my phone to the dell service center to get it rectified...
thanks and hoping for u'r reply at the earliest
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1219566
Hope you get some help from here
i tried all this and then only posted this...thanks anyways dude...i went to dell service centre and got it done thanks
terminal17 said:
i tried all this and then only posted this...thanks anyways dude...i went to dell service centre and got it done thanks
Click to expand...
Click to collapse
ok
they reflashed your OS?
what is it now?
2.2.2?
Sent from my Dell Venue using xda premium
I have 2.2.2 package but the thing is I am not getting time enough time to upload that heavy file
This 2.2.2 my service center guy left it after recovering my venue from sleep .
I will try and upload it tomarw .
Meanwhile can some one share with me . Is there any negative if I flash that 408 oleh. Package.
Sent from my SK17i using XDA
prasad12ka4 said:
ok
they reflashed your OS?
what is it now?
2.2.2?
Sent from my Dell Venue using xda premium
Click to expand...
Click to collapse
Yes it is 2.2.2...apparently they are releasing official GB for venue next month...will have to try that also soon...and also new phones
jitin02 said:
I have 2.2.2 package but the thing is I am not getting time enough time to upload that heavy file
This 2.2.2 my service center guy left it after recovering my venue from sleep .
I will try and upload it tomarw .
Meanwhile can some one share with me . Is there any negative if I flash that 408 oleh. Package.
Sent from my SK17i using XDA
Click to expand...
Click to collapse
u can flash...it worked for me...the steps i followed are:-
1) flash 408 recovery.img
2) update using update.pkg
3) flash system.img
http://forum.xda-developers.com/showpost.php?p=19968194&postcount=45
follow the instructions given in this thread carefully else u may brick it...
Sent from my Dell Streak using XDA
Help me plz
I ve a Dell venue. While i was watching clip on yotube. The report MIUI appeared and restarted my Venue. But i hang on logo "Dell" even not entered bootmode, fastboot. Examp: Pw + Volumn - ,Mute on + Volumn + - + Cam key. But it not work probly. what can i do ?
Dellvenue said:
I ve a Dell venue. While i was watching clip on yotube. The report MIUI appeared and restarted my Venue. But i hang on logo "Dell" even not entered bootmode, fastboot. Examp: Pw + Volumn - ,Mute on + Volumn + - + Cam key. But it not work probly. what can i do ?
Click to expand...
Click to collapse
try to remove the battery for few minutes then start the phone in recovery mode(flash ur desired rom through it) if recovery mode is not coming then again try to pull out the battery the start the fastboot mode( flash stock recovery and place update.pkg in sd card) and if both r not coming go to dell service center.
terminal17 said:
Yes it is 2.2.2...apparently they are releasing official GB for venue next month...will have to try that also soon...and also new phones
u can flash...it worked for me...the steps i followed are:-
1) flash 408 recovery.img
2) update using update.pkg
3) flash system.img
http://forum.xda-developers.com/showpost.php?p=19968194&postcount=45
follow the instructions given in this thread carefully else u may brick it...
Click to expand...
Click to collapse
So, If i need to update to 408, I need to flash 408 recovery first, rite?
Achoels said:
So, If i need to update to 408, I need to flash 408 recovery first, rite?
Click to expand...
Click to collapse
yes u need flash the 408 recovery first and then upgrade to 408...instead of that y dont u try flashing cm7 or miui its better
Related
-removed due to differences between base bands and people getting semi-bricks-
if anybody bricked a device, msg me on irc adamg- @freenode for help
can't download its error 403 when i'm tried to download.please check it thanks
please help me!
hey .. i need your help and im a little desperate...
i found out that eclair is available for the streak so i thought id upgrade to it!..
and now my phone is bricked..
here is what i did to my phone before it got bricked (in chronological order)
1. downloaded the Update.pkg file
2. tried to root my dell streak with Super user 3 to 4 times because it dint seem to work.
3. used unversal androot ( selected the unroot 1.5/1.6 option)
4. it rooted ( i guess)
5. put the update.pkg file on the SD card
6. went to boot loader mode
7. selected the 2nd option
8. press the shutter button to start the process
9. it showed that it was updating
10. and voila it is bricked! (only the dell logo appears)
could you please tell me how to unbrick it or get 2.1 working?
hi
I had the same problem , spent all day trying to fix it, if you perform this command fastboot-windows.exe -i 0x413c flash boot c:\6941_boot.img you should be able to boot your phone.
wait where do i exactly type that in ?? in cmd?
tiensinh99 said:
can't download its error 403 when i'm tried to download.please check it thanks
Click to expand...
Click to collapse
Download link fixed thanks for reporting.
so can i use this rom for any streak like unlock version i had or just the O2 uk ones?.thanks
where do i type tht in?
tiensinh99 said:
so can i use this rom for any streak like unlock version i had or just the O2 uk ones?.thanks
Click to expand...
Click to collapse
^+1 please let us know... and does the streak have to be rooted
tiensinh99 said:
so can i use this rom for any streak like unlock version i had or just the O2 uk ones?.thanks
Click to expand...
Click to collapse
yes, it should work on any version
Currently my Dell is NOT rooted, with custom recovery and custom modaco (unlocked UK Streak). Is this supported?
aftabmajeed said:
wait where do i exactly type that in ?? in cmd?
Click to expand...
Click to collapse
yes. if any problems just pm me Ill try to help you.
bricked...... unlocked streak
flumps said:
bricked...... unlocked streak
Click to expand...
Click to collapse
was you trying this from 1.6?
AdamG said:
was you trying this from 1.6?
Click to expand...
Click to collapse
yup. im also now unable to reflash any other rom from recovery....
AdamG said:
was you trying this from 1.6?
Click to expand...
Click to collapse
I was gonna try this but that just got me worried... Unrooted, 1.6 unlocked in Canada.
Guys, PLEASE stop asking.
YES. IT HAS TO BE ROOTED.
Not tried it yet adam, but i will do in a sec and report back
AdamG said:
This is the stock 6941 build, the only thing I have added to it is SU, I have tested it on my own Streak and can confirm it all works.
Download:
boot.img
system.img
Install:
Boot into fastboot and type
Code:
fastboot -i 0x413c flash boot 6941_boot.img
fastboot -i 0x413c flash system 6941_system.img
Reboot and your done
Notes:
You will need to perform a factory reset after flashing if coming from 1.6.
You do not need to flash boot.img or perform a factory reset if you already have 2.1 installed.
Click to expand...
Click to collapse
could somebody provide boot.img and system.img for 4399 build?
Dont know why but wifi and network doesnt work with 6941 build.
flumps said:
bricked...... unlocked streak
Click to expand...
Click to collapse
sorted but not using this method
flumps said:
sorted but not using this method
Click to expand...
Click to collapse
how did you managed to do that?
ive had alot of force closes and restarts ever since i put one of steves roms on....to no avail i have not gotten any real help...i just wanna go back to the stock rom and root that and do a few tweeks to it and im done flashin roms.....whats the best way to acheave this?
trexc832 said:
ive had alot of force closes and restarts ever since i put one of steves roms on....to no avail i have not gotten any real help...i just wanna go back to the stock rom and root that and do a few tweeks to it and im done flashin roms.....whats the best way to acheave this?
Click to expand...
Click to collapse
Please post questions in the Q&A forum thanks
Moving to Q&A
sometime factory reset helps
( flash the recovery of the rom u want and then flash the rom)
Please do some reading. I have been typing the same reply for past many days !!!!
done that already doesnt work...ive been through 1.7.1 it was ok but still FC's 1.8.1 FC city. alot of restarts. 1.9.0 hangs up wit dell logo sometimes, freezes when data connection is turned on while restarting i have to restart 100 times....no real game play without freezing...i just wanna use this for games as well without the freezing....
I've just gone back to stock exactly because of these issues, I downloaded the QDL tool (guides and downloads here) and used this to flash 2.2 stock. It seems fine so far!
i tried the qdl tool and it puts 305 back on my streak but i cant update anyfurther past that what do u sudjest
Sure you can. Get the download for the 309 or 318 update package and load it on your streak's sd card named update.pkg then go into recovery and manually flash it.
Can't get into recovery menu for some reason
Sent from my Dell Streak using XDA Premium App
What happens when you hold both volume buttons down and power on the device while keeping the volume buttons held down? anything different than normal booting up? You can download the recovery files in the wiki and try manually flashing the recovery then manually flashing one of the stock roms.
If you used QDL to get to 305 you should be able to use the url for 318 to just download and install it:
http://mobileupdate.dell.com/?version=GAUSB1A121100
Use that url in your android browser and go through the update. It will download build 318 which is the latest OTA update released from Dell for unlocked baseband (which if you used QDL you are now on)
drgopoos said:
sometime factory reset helps
( flash the recovery of the rom u want and then flash the rom)
Please do some reading. I have been typing the same reply for past many days !!!!
Click to expand...
Click to collapse
the only other time ive had to flash a recovery was the first time i got my phone and the instructions stated to use the following command
Code:
fastboot -i 0x413c flash recovery recovery.img
so do i do it the same way? do i need to specify where in memory or can i take that part out?
That's the correct command to use. just like you typed it
Sent from my Dell Streak using Tapatalk
Hi all,
I was installing custom roms back in the xda 2 days but eventually moved over to iphone and now im swtiching to android. (I love the new site by the way!)I have an (o2) streak arriving tomorrow and would like to get the best out of my device.
I have tried my best to do my research over the past few days before making my first post and now I have some questions if I may...
To flash a rom I need to:
1. Install fastboot
2. Root device using androot or superboot
3. Install clockworkmod recovery
4. Download rom and flash to device
If my device comes with 1.6 I need to update to 2.1 first.
Roms...
The ROMs I have come across so far:
- O2 2.2
- Custom Streakdroid by Djsteve http://streakdroid.com/?page_id=15&did=26
All others that I have seen seem to be in alpha.
So am I right in thinking that streakdroid is the most advanced but stable rom so far?
Is there any backup tools / failsafes that I can use before starting all this?
Do I need to worry about baseband? Do I follow this?...
"IT IS HIGHLY RECOMMENDED TO UPDATE TO THE BELOW BASEBAND FOR 1.5.1+"
If somebody let me know if I've understood the above correctly and if I'm ok to proceed with flashing tomorrow?
Any help is greatly appreciated and it's good to be back!
Just update to stock 351, I find that to be very fast and super stable.
Sent from my Motorola DynaTAC using XDA Premium App
Thanks for the reply,
I have done some searches and it seems stock 351 is the latest non-custom rom. Is this what I will recieve from o2 in the OTA upgrade? Am I not missing out on a load of extra features if I use this instead of a custom rom?
Thanks
Go for steves rom i am on o2 uk flashed the 351 a bit slow 4 me went back to the streak savier u will love 190
Sent from my Dell Streak using XDA App
http://forum.pocketables.net/showthread.php?t=9694
What's 190?
Radimus, if I follow that guide can I flash a custom rom?
Have I understaood the process correctly in my original post? My Streak is here and I want to do this tonight.
Thanks
If anyone is available to help me over skype chat I will put £10 into their paypal account for their help. Thanks
my skype id: phraseone.co.uk
garethsimpsonuk said:
What's 190?
Radimus, if I follow that guide can I flash a custom rom?
Have I understaood the process correctly in my original post? My Streak is here and I want to do this tonight.
Thanks
Click to expand...
Click to collapse
read the FAQ in the second post : http://forum.pocketables.net/showthread.php?t=9694
Thanks that answers question 2 but what about 1 and 3?
Regards
I carried out all previous steps and now this is what I've done:
1. copied update-1.6.1.zip to the root of sd card. It said I needed to copy a .pkg but the streakdroid package comes in a zip so i copied that on instead.
2. Installed the recovery image
3. Booted into recovery menu and selected update via update.pkg on sd card.
Now the streak has the Dell logo with an ! exclamation mark and it's just sitting there. Have I done it correctly? It says it takes 10 minutes but I'm a bit worried because there is no progress meter there.
Some one please let me know if I've done the right thing as I'm too scared to touch it now in case I brick it!
Thanks
Ok i figured i had to press the power button to get the menu but now i cant get the menu back! Every time I select the option it tales me to: android system recovery utility
When I try to do a recovery it says verification failed...any pointers?
It depends on what you have done so far. You are best starting with the latest official update for your phone using system update, then installing the fastboot drivers on your pc, installing new recovery, either streakmod or clockworkmod and then installing djsteves over that if you want a custom rom.
Instructions for each step are evident in forums, but If you require further assistance, just ask
Sent from my Motorola DynaTAC using XDA Premium App
Thanks for the reply. I flashed the recovery again and it allowed me into the advanced menu again which enabled me to flash. It's all working now but I have just noitved 1 thing....
I flashed with update-1.6.1.zip from http://streakdroid.com/?page_id=15 but have just found update-1.9.0.zip from here http://forum.xda-developers.com/showthread.php?t=1003525
Am I right in thinking that I have just flashed with an older version? If so, I will do it again.
Another question...if I flash with a new rom I must lose all my data?
When it's on the dell exclamation screen you press the power button to bring up the recovery screen.
Posted with StreakZilla, using XDA App.
Newbie here!My x10mini now (firmware verison is 2.1-update1).(Baseband version is M76XX-TSNCJOLYM-53404006).(Kernel version is [email protected]#1).(Build number is 2.0.1.A.0.47). Model E10i
I want updated to froyo and also gingerbread,now i want install update zip but after turn off phone and start it again then press back button,my phone just boot normal cant get in recovery mode.I test it with root my phone and unroot my phone still same.Anything miss or mistake?What can i do?
I search in all thread see many there can boot with press back button,but me cannot.why?Is that only work for E10a?Or my fiwmware problem?Please help!thanks a lot
tcw18 said:
Newbie here!My x10mini now (firmware verison is 2.1-update1).(Baseband version is M76XX-TSNCJOLYM-53404006).(Kernel version is [email protected]#1).(Build number is 2.0.1.A.0.47). Model E10i
I want updated to froyo and also gingerbread,now i want install update zip but after turn off phone and start it again then press back button,my phone just boot normal cant get in recovery mode.I test it with root my phone and unroot my phone still same.Anything miss or mistake?What can i do?
I search in all thread see many there can boot with press back button,but me cannot.why?Is that only work for E10a?Or my fiwmware problem?Please help!thanks a lot
Click to expand...
Click to collapse
did you install xrecovery or cwm??
I've installed X recovery
doomhammer07 said:
did you install xrecovery or cwm??
Click to expand...
Click to collapse
I've installed X recovery but then too it never boots into recovery mode
i press back button too as soon as i see the Sony ericsson logo
tcw18 said:
Newbie here!My x10mini now (firmware verison is 2.1-update1).(Baseband version is M76XX-TSNCJOLYM-53404006).(Kernel version is [email protected]#1).(Build number is 2.0.1.A.0.47). Model E10i
I want updated to froyo and also gingerbread,now i want install update zip but after turn off phone and start it again then press back button,my phone just boot normal cant get in recovery mode.I test it with root my phone and unroot my phone still same.Anything miss or mistake?What can i do?
I search in all thread see many there can boot with press back button,but me cannot.why?Is that only work for E10a?Or my fiwmware problem?Please help!thanks a lot
Click to expand...
Click to collapse
First of all: Good thing it didn't work yet, because you would have bricked your phone, you're on the wrong firmware/baseband to make the ROM work.
Secondly: Xrecovery isn't standard software on your phone, so it won't work without some effort.
So here's what you do:
1. Use SEUS or PC Companion to update your firmware to 2.1.1.A.0.6 with Baseband version M76XX-TSNCJOLYM-53404015
(If it won't update your phone, send me a pm i'll give you the link for firmware you can flash with flashtool)
2. Use Flashtool to root your Phone
3. Use Flashtool to install XRecovery
After that: boot into XRecovery and install your chosen ROM according to the instructions in the post you got it from.
If you need CWM to flash the ROM, there is a version that can be flashed with XRecovery, it's the easiest way.
azhar817 said:
I've installed X recovery but then too it never boots into recovery mode
i press back button too as soon as i see the Sony ericsson logo
Click to expand...
Click to collapse
Don't press, spam it. Keep pressing over and over till it appears.
X10man
Sent from my U20i using xda premium
Drivers Not found for My Device
x10man said:
Don't press, spam it. Keep pressing over and over till it appears.
X10man
Sent from my U20i using xda premium
Click to expand...
Click to collapse
When i try to flash my device From Flash tool it says
"Driver not found for your Device"
"Install it from Drivers Folder"
But I've Already installed all the Drivers for My Device
Any Suggestions...?
azhar817 said:
When i try to flash my device From Flash tool it says
"Driver not found for your Device"
"Install it from Drivers Folder"
But I've Already installed all the Drivers for My Device
Any Suggestions...?
Click to expand...
Click to collapse
Did you download and install Sony PC Companion or Sony Update Service?
If not, do it, it will have the proper drivers and you will probably need it sooner or later anyway
I've always found the driver install to be buggy. Install it a few times checking X10 mini/pro and X8 adb driver boxes and flashmode drover boxes. Took me about 6 runs last time but it works now
X10man
Sent from my U20i using xda premium
Can i find anyone in bangalore for this problem..?
x10man said:
I've always found the driver install to be buggy. Install it a few times checking X10 mini/pro and X8 adb driver boxes and flashmode drover boxes. Took me about 6 runs last time but it works now
X10man
Sent from my U20i using xda premium
Click to expand...
Click to collapse
I'm tired of trying to install custom rom's....
if i get to know someone in bangalore who can do this for me :crying:
azhar817 said:
I'm tired of trying to install custom rom's....
if i get to know someone in bangalore who can do this for me :crying:
Click to expand...
Click to collapse
Can you do teamviewer? If so, I can do the PC side of things for you, you just need to do what I tell you on the phone
x10man
Thanks For your support
x10man said:
Can you do teamviewer? If so, I can do the PC side of things for you, you just need to do what I tell you on the phone
x10man
Click to expand...
Click to collapse
after toiling whole night yesterday finally installed my custom rom 'ginger dx'.
but i'll be needing your support in future too.
azhar817 said:
after toiling whole night yesterday finally installed my custom rom 'ginger dx'.
but i'll be needing your support in future too.
Click to expand...
Click to collapse
No problem, we'll be here
Originally Posted by x10man
Can you do teamviewer? If so, I can do the PC side of things for you, you just need to do what I tell you on the phone
x10man
Click to expand...
Click to collapse
after toiling whole night yesterday finally installed my custom rom 'ginger dx'.
but i'll be needing your support in future too.
Click to expand...
Click to collapse
As SmG said, we're here to help
X10man
Sent from my U20i using xda premium
HI,
My dell streak gets stuck on dell logo and then reboots again and again. it was not rooted and was working fine on froyo 2.2 O2.
Ive tried installing the update package from recovery mode by selecting install update.pkg from sd card but i get an error saying e:can't mount update.pkg.
After searching i performed an memory test from fastboot; Sd card test passes but the internal memory test fails and gives an error: Cmd/Data test fail. a few days back my computer had a trojan virus and it was converting the folder into shortcuts. I dont know for sure but i think it could have been the cause of this problem as i plug my phone to the pc almost everyday
ill be glad if someone can help me through this. plz can some1 help me through this.plz i really need my dell streak working ill appreciate any kind of help... Thank you
Hi,
rename the update.pkg in update.zip and it should work.
MfG & Gut Pfad
scoute-dich
----
Gesendet von meinem Dell Streak 5 mit Tapatalk.
Think free - use Linux!
If the above doesnt work try a factory reset
Taha.Fazal said:
HI,
My dell streak gets stuck on dell logo and then reboots again and again. it was not rooted and was working fine on froyo 2.2 O2.
Ive tried installing the update package from recovery mode by selecting install update.pkg from sd card but i get an error saying e:can't mount update.pkg.
After searching i performed an memory test from fastboot; Sd card test passes but the internal memory test fails and gives an error: Cmd/Data test fail. a few days back my computer had a trojan virus and it was converting the folder into shortcuts. I dont know for sure but i think it could have been the cause of this problem as i plug my phone to the pc almost everyday
ill be glad if someone can help me through this. plz can some1 help me through this.plz i really need my dell streak working ill appreciate any kind of help... Thank you
Click to expand...
Click to collapse
The trojan you are talking most surely affect only the SDcard, a friend of mine had the same issue on a different device.
I would recommend installing a custom Recovery like Streakmod, flash 366 bb and a ROM like DSC, Longhorn or LXdroid, as those mentioned have the universal kernel that don't check the BaseBand.
Totally wiping everything is a must!
Flashing recovery can be done easely using the MultiFlashing tool provided in the Android Development section, so all this mess wouldn't take more than 1 hour (with reading and wandering if it's safe - it is safe, ia assure you )
Hope this helps/works
hey buddy, when I enter the recovey mode, and will install a new rom or another option, the camera button does not work. What can I do?
Thank you for replying
Lexmazter said:
The trojan you are talking most surely affect only the SDcard, a friend of mine had the same issue on a different device.
I would recommend installing a custom Recovery like Streakmod, flash 366 bb and a ROM like DSC, Longhorn or LXdroid, as those mentioned have the universal kernel that don't check the BaseBand.
Totally wiping everything is a must!
Flashing recovery can be done easely using the MultiFlashing tool provided in the Android Development section, so all this mess wouldn't take more than 1 hour (with reading and wandering if it's safe - it is safe, ia assure you )
Hope this helps/works
Click to expand...
Click to collapse
thanks a lot for replying can you give me a link(s) that have a detailed step by step process as i dont knw much... also i would like to keep the original 2.2 firmware if it is easily possible.. really appreciate your help. I thought that no one will reply... thanx again
Taha.Fazal said:
thanks a lot for replying can you give me a link(s) that have a detailed step by step process as i dont knw much... also i would like to keep the original 2.2 firmware if it is easily possible.. really appreciate your help. I thought that no one will reply... thanx again
Click to expand...
Click to collapse
Well, i will update the first post of my LXdroid ROM with a tutorial, if you want a fully funtional with the least amounts of bugs i will recommend DSC ROM.
But this is not required if you want to keep the original 2.2 firmware, as almost all the custom ROM's that i've talked about are 2.3.x.
the tutorial will be written, Your choice
Lexmazter said:
Well, i will update the first post of my LXdroid ROM with a tutorial, if you want a fully funtional with the least amounts of bugs i will recommend DSC ROM.
But this is not required if you want to keep the original 2.2 firmware, as almost all the custom ROM's that i've talked about are 2.3.x.
the tutorial will be written, Your choice
Click to expand...
Click to collapse
im trying to install the 02 rom... ive copied the update pkg and renamed it to update.zip... then i turn on into the fastboot mode and install the recovery.img the phone says install recovery done.. then i restart it and go to the option update from update pkg but then i get the same error e cant mount update pkg e cant mount gif etc
Taha.Fazal said:
im trying to install the 02 rom... ive copied the update pkg and renamed it to update.zip... then i turn on into the fastboot mode and install the recovery.img the phone says install recovery done.. then i restart it and go to the option update from update pkg but then i get the same error e cant mount update pkg e cant mount gif etc
Click to expand...
Click to collapse
i think you need to replace the internal sd....
http://www.ifixit.com/Teardown/Dell-Streak-Teardown/3512/1
once you have done that... just do the dell factory reset (white text black background menu)...
your phone should be able to start again
Taha.Fazal said:
im trying to install the 02 rom... ive copied the update pkg and renamed it to update.zip... then i turn on into the fastboot mode and install the recovery.img the phone says install recovery done.. then i restart it and go to the option update from update pkg but then i get the same error e cant mount update pkg e cant mount gif etc
Click to expand...
Click to collapse
As far as i know, you can't possibly install update.pkg using custom recovery, you must install a stock recovery and after that you can flash the update.pkg as it is (update.pkg), changing the extension does nothing
Hope this helps.
Lexmazter said:
As far as i know, you can't possibly install update.pkg using custom recovery, you must install a stock recovery and after that you can flash the update.pkg as it is (update.pkg), changing the extension does nothing
Hope this helps.
Click to expand...
Click to collapse
I installed the stockmod recovery and then copied the dsc 1.0 rom on sd and installed the zip from the recovery mode... installation was successful but after restart it gets stuck on the logo and restarts again and again... after the installation was complete when i press the back button i gives the error e cant mount innersdp01 or some thing like that... id love not to replace the innerSD until it is the last option... thnkyou for being so helpfull
deysmacro said:
i think you need to replace the internal sd....
http://www.ifixit.com/Teardown/Dell-Streak-Teardown/3512/1
once you have done that... just do the dell factory reset (white text black background menu)...
your phone should be able to start again
Click to expand...
Click to collapse
well if i change the inner sd dont i need to copy the system files in it.. or something like that..can u refer a link if ineed to... or will teh factory reset do the job... thank you
Taha.Fazal said:
well if i change the inner sd dont i need to copy the system files in it.. or something like that..can u refer a link if ineed to... or will teh factory reset do the job... thank you
Click to expand...
Click to collapse
you just need to change to anything 8gb and below for the internal sd... and dell factory reset should do the trick...
Thankyou
Thankyou all, Especially deysmacro and Lexzmaster for your help it got fixed by replacing the inner sd after the teardown... nnow im running on DSC 1.0 but ti takes a lot longer to boot and lights keep flashing too... thankyou again
Taha.Fazal said:
Thankyou all, Especially deysmacro and Lexzmaster for your help it got fixed by replacing the inner sd after the teardown... nnow im running on DSC 1.0 but ti takes a lot longer to boot and lights keep flashing too... thankyou again
Click to expand...
Click to collapse
i am glad it is working again... :victory:
light keeps flashing mean your baseband is not matched with the current rom... you should do the upgrade... it is in dsc thread if you read it carefully... it should say something like flashme ... :good:
you may try other rom as well.. if you are interested.. such as longhorn, ics, lxdroid
deysmacro said:
i am glad it is working again... :victory:
light keeps flashing mean your baseband is not matched with the current rom... you should do the upgrade... it is in dsc thread if you read it carefully... it should say something like flashme ... :good:
you may try other rom as well.. if you are interested.. such as longhorn, ics, lxdroid
Click to expand...
Click to collapse
sure ill try other roms can u suggest the best... and thankyou again for replying for the led flashes.. ill surely increase the bandwidth
Taha.Fazal said:
sure ill try other roms can u suggest the best... and thankyou again for replying for the led flashes.. ill surely increase the bandwidth
Click to expand...
Click to collapse
we here dont have the best rom.. all rom usage is really based on preference.. you try this rom and you like it.. well.. that shoul do it
i personally like dsc .72 the best,with 406 bb.
but im waiting for an ics with good data and wifi tether.....and ill be on it
Sent from my pimped out Dell
dell streak 5
how to replaced internal sd? not the sd card at the back of battery holder. please advise i also experiencing that kind of problem, sometimes it is working good but there's a time that it freezing then once i removed the battery then put it back on it keeps on rebooting. i already update with 2.3.3
mokokawi said:
i personally like dsc .72 the best,with 406 bb.
but im waiting for an ics with good data and wifi tether.....and ill be on it
Sent from my pimped out Dell
Click to expand...
Click to collapse
Search the forum as there should be an article covering the process. In short, you either have to take the Streak apart, or cut away some of the plastic above the SIM card slot to get to the internal MicroSD.