Hi there,
I flashed my Neo V(MT11i) using flashtool while the battery is critically low. The flashing ended successfully but the phone just won't boot after that. I charged it for like 2 hours already Is it really a mistake to flash it while the battery is low?
Or maybe it's because I flashed it with (MT11a) firmware? I mistaken it for MT11i but I flashed it anyway coz I thought there shouldn't be any problem. Thanks in advance
Hiii,
are u flash your phone with flashtool? If yes...then
Do flash again do these steps
remove battery.....then put again,
hold back button then insert usb cable
then flash again,,,
any which Rom u r flashing?
noowb00 said:
Hi there,
I flashed my Neo V(MT11i) using flashtool while the battery is critically low. The flashing ended successfully but the phone just won't boot after that. I charged it for like 2 hours already Is it really a mistake to flash it while the battery is low?
Or maybe it's because I flashed it with (MT11a) firmware? I mistaken it for MT11i but I flashed it anyway coz I thought there shouldn't be any problem. Thanks in advance
Click to expand...
Click to collapse
I flashed my phone while batt was even below 10%. (note: I do not advise anyone to do that)
Download new ftf and flash it again.
Mt11a should work, but just in case try with I fw.
Also you didnt tell what happen when you press/hold on button
Mandeep148 said:
are u flash your phone with flashtool?
.
.
any which Rom u r flashing?
Click to expand...
Click to collapse
Do you even read question before you reply? Answers to all of your questions are in first post!
Plus, from his post can be seen that he knows how to use flashtool.
It shouldn't be a problem MT11a fw should work fine on MT11i.Try to make a reflash using MT11i fw,it should work,even if the battery is <10% (i know this because i've also flashed with battery critically low).
Madfysh said:
I flashed my phone while batt was even below 10%. (note: I do not advise anyone to do that)
Download new ftf and flash it again.
Mt11a should work, but just in case try with I fw.
Also you didnt tell what happen when you press/hold on button
Click to expand...
Click to collapse
Oh yeah, forgot to wrote one last detail. The LED doesnt light up or anything but after plugging it into the charger and hold the power button to like switching it on, the LED glows Red and nothing happened. Just that. For a few hours I think. After leaving it the whole night connected to the charger, this morning, the LED blinks orange, I think. But it blinks. Not just glows.
And, if the phone dies some where right after the flashing, charging it back should just be enough to boot it up right?
The internet is like **** here, in my new school. Damn! If it weren't for that, i'd try downloading other firmwares and flashing them again.
Edit: the phone vibrates a little and the LED glows red/orange and nothinng else happens.
Mandeep148 said:
Hiii,
are u flash your phone with flashtool? If yes...then
Do flash again do these steps
remove battery.....then put again,
hold back button then insert usb cable
then flash again,,,
any which Rom u r flashing?
Click to expand...
Click to collapse
Thank you sir, I really appreciate your attempt to help me. Thank you.
Related
I was reboot my phone and once he do this:
Screen out (duh) screen on with ''Sony Ericsson'' then he still stay
on that, idk dont know why.
I have reinsert my battery i have used the right and left button`s.....
So, if someone can help me with a other option, please help me...
Very Thanks alot!!!...
x10i-user said:
I was reboot my phone and once he do this:
Screen out (duh) screen on with ''Sony Ericsson'' then he still stay
on that, idk dont know why.
I have reinsert my battery i have used the right and left button`s.....
So, if someone can help me with a other option, please help me...
Very Thanks alot!!!...
Click to expand...
Click to collapse
try using flashtool. directions are in the link.
U mentioned you have a x10i correct, then pick the firmware you want with the x10i with the latest baseband. if you still have questions, keep asking.
rooting is next if you go that route then, flashing ROMS, which are associated with a baseband
here is the link for flashtool: http://forum.xda-developers.com/showthread.php?t=920746
Yeah dude, use flashtool.... just flash it back... tht worked for me... i bricked my phone once.... now its rollin again....
how long did you leave it on the SE screen for?? sometimes mine takes a minute to boot through that?
im_iceman said:
how long did you leave it on the SE screen for?? sometimes mine takes a minute to boot through that?
Click to expand...
Click to collapse
ummmmh, more then 24 hours... :S
but i gonna try Flashtool right now, i hope i will work.
you could also just repair it using SEUS... depends if you want to root and install custom ROM's etc..
im_iceman said:
you could also just repair it using SEUS... depends if you want to root and install custom ROM's etc..
Click to expand...
Click to collapse
ok, i`ll try...
i can`t place my phone in Flashmode he gonna automatic to the Sony Ericsson logo...
What did i wrong?...
fire up SEUS, get to the bit where it say to connect your phone.
take the battery out for 10 seconds or so..
plug the micro USB cable into your phone only..
hold the back key (and keep it held until SEUS tells you to release it later in the process), push the battery back in
push the USB cable into your PC.
Should boot up into flash mode and SEUS will do it's thing!.
Done it before
Hi mate done it today since im new at rooting if you were trying to install a theme or rom, you might not have their firmware, if this is the case then you just from that Sony Ericsson screen keep pushing the Back or <-- key, this will boot you into xrecovery and just restore... if you havent made a back up, then you could try replace the rom you have back with the Se offical 2.1 rom which you can find in Android dev. and just launch it back with that... Hope this worked!!
So, sort of long story, i'll cut it short
-Got an old X10, had stock 2.3.3
-Rooted it
-Did not unlock bootloader, got kinda scared.
-Tried to install FeraLab custom ROM, it failed probably because of sdcard permissions; i accidentally wipe /system /data /cache
-stuck at first Sony Ericsson screen
-Somehow managed to flash a 2.1 stock rom with flashtool, after an hour of different combinations of enterring flash mode and pulling the battery
-Tried to install FeraLab again, this time it went through
-After install, rebooted, phone shut down during boot up process
-Will not turn on at all. Even when plugged into a PC, wall, not plugged in, pulling battery, etc.
I think what happened is that FeraLab needed a newer baseband than the 2.1 stock rom had. Does anyone have any suggestions on how to get this sucker to even turn on? Not a single LED is on when plugged in, giving me the impression that it's not charging.
If the battery has drained out, it might take some time before it kicks in and indicates that it is charging.
If the ROM has failed somehow, it might not show that it is charging at all, but might be charging.
Either way: Let it charge "blindly" for a while, and see what happens.
Once it does boot up to some level or shows life-signs, let it charge fully before you'l attempt a ROM flash.
The flash/recovery mode needs a full battery, and reason is that the external power isn't used even when connected while in flash/recovery mode.
If you happen to be in bad luck, and the ROM failed as a result of a drained battery, you might have to charge the battery externally. Use an external battery charger made for 3.6 volts Lithium Polymer batteries, and make sure to align the + and - terminals properly.
I can recommend the multicharger from Powerbase, called C-734U:
http://www.powerbasehk.com/product.php?id=148
Using it myself to charge the X10 battery, as well as other batteries from other devices I have.
EDIT:
(For some reason, powerbase has taken back that it'll charge Lipo batteries, but when I bought mine, it was described as a li-ion, li-poly and Ni-MH charger, and it't ability to charge li-poly batteries was the very one reason to why I bought it.
I suspect PowerBase does not want to take responsibility if anything happens to the li-poly-batteries, as they are known to be more dangerous than other types.)
I've left it on the wall charger all night, no response or anything. Luckily, I bought a new battery a few days ago, so when that comes in, hopefully it will be charged enough for this thing to boot.
Do me a favour are u able to take screebshot of settings, about phone menu and post it here? Need to see ur baseband and kernel
Sent from my X10i using XDA
laneyofdeath said:
Do me a favour are u able to take screebshot of settings, about phone menu and post it here? Need to see ur baseband and kernel
Sent from my X10i using XDA
Click to expand...
Click to collapse
Dude his phone wont start up. How come he'll be able to take a screenshot
Sent from my LT26i using xda premium
king-iyokan said:
Dude his phone wont start up. How come he'll be able to take a screenshot
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Yeah, i'm not sure what he expected. But, good news! Now for some reason my phone started blinking red whenever I tried to turn it on! I guess the battery completely ran out or something. It also blinks every now and then when plugged in, so I guess it's charging. The previous owner of this phone said that it had some battery problems, so that's why I ordered that new battery. I'll let it charge for awhile and let you guys know what happens.
Okay, after getting my new battery, the phone will still not turn on. I think i've figured out two behaviors:
1. If the battery is nearly completely out of charge, it will flash a red light
2. If the battery has charge, it will not do anything at all.
Anyone know how to fix this?
While trying to turn on the phone, after long-press power button, do you get a flash from status led & short vibration?
From my XPERIA X10S v8.2 on kCernel @ 1.19ghz
ToledoJab said:
While trying to turn on the phone, after long-press power button, do you get a flash from status led & short vibration?
From my XPERIA X10S v8.2 on kCernel @ 1.19ghz
Click to expand...
Click to collapse
No vibration, the red LED flashes three times, and that is , as I said before, what happens when the battery seems to not have any charge. If I have a charged battery it does absolutely nothing.
Have you removed sim & sd card and tried. I know it sounds dumb but when I flashed a bad kernel I had to try to connect flash mode like 10 times. Finally I left the phone unplugged from pc, started flashtool and started flashing. I only put battery in phone just before holding back key. I never connected USB until tool said to dis-connect phone and connect in flashmode.
i wish you luck, I know how I felt when it went wrong
From my XPERIA X10S v8.2 on kCernel @ 1.19ghz
FireFreek said:
So, sort of long story, i'll cut it short
-Got an old X10, had stock 2.3.3
-Rooted it
-Did not unlock bootloader, got kinda scared.
-Tried to install FeraLab custom ROM, it failed probably because of sdcard permissions; i accidentally wipe /system /data /cache
-stuck at first Sony Ericsson screen
-Somehow managed to flash a 2.1 stock rom with flashtool, after an hour of different combinations of enterring flash mode and pulling the battery
-Tried to install FeraLab again, this time it went through
-After install, rebooted, phone shut down during boot up process
-Will not turn on at all. Even when plugged into a PC, wall, not plugged in, pulling battery, etc.
I think what happened is that FeraLab needed a newer baseband than the 2.1 stock rom had. Does anyone have any suggestions on how to get this sucker to even turn on? Not a single LED is on when plugged in, giving me the impression that it's not charging.
Click to expand...
Click to collapse
Try to flash any latest kernel via flashtool . Go for doomkernel . I think its software issue . Try this first .
Almost same here please help..
Last night battery ran out of charge & phone switched off.. then i plugged the charger it doesn't charge.. after some time i tried turning on.. Vibrates with the green LED but nothing happens then..
Note: This is not the 1st time i'm letting my phone drain, but facing this problem for the 1st time..
Rom : Spikelabs GB Gaming rom
Kernel : Ferakernel v23 beta6
I tried another battery, charger, data cable.. Tried flashing stock & spikelabs kernel., but of no use..
Any help is greatly appreciated..
Thanks in advance.. :good:
Something like that happened to me not long ago!
I was trying to flash some ROMs and I messed up then my phone wouldn't turn on!
But Miracously, I could flash a Stock 2.3.3 which fixed the problem!
At first, I used Sony PC Companion, which helped a lot- and after I screwed it for the second time, I used FlashTool-
I don't know if this was helpful, but I hope your x10 will be fixed soon!
yeah try the PC Companion first, it helped me too a couple of weeks ago
No luck...
Hi friends..
Tried to repair using PC companion, but was able to connect only in flash mode, unable to proceed software update..
I previously tried flashing stock GB using flashtool thrice. Still couldn't switch on the phone.. What else may i try..
Thanks friends..
ashok weird said:
Hi friends..
Tried to repair using PC companion, but was able to connect only in flash mode, unable to proceed software update..
I previously tried flashing stock GB using flashtool thrice. Still couldn't switch on the phone.. What else may i try..
Thanks friends..
Click to expand...
Click to collapse
try flashing kernel other than spikelabs (e.g. feravolt,doom,achotjan,zkernel..etc.)
sanababitz said:
try flashing kernel other than spikelabs (e.g. feravolt,doom,achotjan,zkernel..etc.)
Click to expand...
Click to collapse
Tried Ferakernel, Stock GB kernel, etc bro.. No luck..
Flashed Stock GB firmware more than 3 times still no luck :crying:
SEUS not working _ couldn't connect to network..
SUS does not have x10 enlisted
Went to 3 service shops at - Ritchie street, Chennai. They simply said harware issue (Short in board) and gave back the phone.
Now given at a better service centre. Will get back on monday it seems. Will update the status friends..
Thanks..
Here also they said the same reason friends.. Short in board..
Is there any way i could recover the phone???
Hi there. First of all, sorry about my english, but i'm spanish
I was reading a lot, and i cant find a solution to my phone. It sudently becomes a brick just when charging (with anothers phone charger) and the battery was lower than 10%
It doesn't work, and don't response to any of all solutions i've read (Take out SIM, SD card, remove battery and wait... ) no way... Screen never come back to iluminate again. Just, when pushing power buttom, the phone's vibrates.
So tired of the brick, i've arrived at this page. And I read this post:
http://forum.xda-developers.com/showthread.php?t=1568792
And try to become my phone back...
At least, the phone enter in flashmode, and i can flash with flashtools... but the phone never come back... just the brick
I tryed to flash with the Xperia_2011_FreeXperia_ALL.ftf file and OK
Afther that, take out the USB and flash again with one ROM i get from here:
Xperia Mini Pro (SK17i)
4.0.2.A.0.42 - http://www.mediafire.com/?hevz3x5w9pqt24q
4.1.B.0.431 - http://www.mediafire.com/?j0bdx06zz5skvzt
But the phone never works. One time afther flashing with 4.0.2.A.0.42 i noticed, that trying to power on the phone, the red led shyne 3 times, and thats supposed to be the battery. But i don't know if the battery now is charged. I've left it hours charging, and hours too to the USB...
Supposedly, i cant flash without battery in the phone, but flashtools finish correctly
So... any idea?
There is something i can do?
Thank all of you who read this!
Its probably battery empty. recharge battery or get a friends and try
Sent from my X8 using Tapatalk 2
First make sure that your battery is really fine. Try another one.
If that fails, see if you can get your device into flash mode?(Switched off+Vol Down + USB cable)
If yes, try flashing a custom ROM. For example, download CyanogenMod from here, use Flashtool (guide) to flash the kernel provided in the downloaded ROM's ZIP file. Then, boot again into Clockword Mod Recovery(Keep pressing Vol DOwn button while boot or google for how to enter recovery for your phone). Copy the downloaded Cyanogenmod ZIP to SD card and install it via ClockwordMod recovery.
See if the above works.
bandarigoda123 said:
Its probably battery empty. recharge battery or get a friends and try
Sent from my X8 using Tapatalk 2
Click to expand...
Click to collapse
But, if it was problem of battery, i suppose, that i can't finish flashing with flashtoolts. Not?
Milven said:
But, if it was problem of battery, i suppose, that i can't finish flashing with flashtoolts. Not?
Click to expand...
Click to collapse
Try booting up your phone with the USB connector plugged in the PC (maybe it will charge the battery then)
Milven said:
But, if it was problem of battery, i suppose, that i can't finish flashing with flashtoolts. Not?
Click to expand...
Click to collapse
At least my phone (LWW WT19i does not work without the battery with Flashtool. I'm not sure about your device.
Anyway try flashing a custom ROM like I said. Try unlocking bootloader first though from here
U said that red light show when try to on the phone.
Just try another battery.. It should work
Sent from my X8 using Tapatalk 2
You said LED blinks 3 times so if the color of LED is RED then it indicates empty battery..
Hey, my problem wasnt the same as yours, but it helped for me when i got only service logo on screen.
On this link you find a "Play_v1.01_TA brick fix UPDATE" zip.
Download, unpack and flash it.
http://forum.xda-developers.com/showthread.php?t=1126358&page=10
I hope it will help u.
Milven said:
Hi there. First of all, sorry about my english, but i'm spanish
I was reading a lot, and i cant find a solution to my phone. It sudently becomes a brick just when charging (with anothers phone charger) and the battery was lower than 10%
It doesn't work, and don't response to any of all solutions i've read (Take out SIM, SD card, remove battery and wait... ) no way... Screen never come back to iluminate again. Just, when pushing power buttom, the phone's vibrates.
So tired of the brick, i've arrived at this page. And I read this post:
http://forum.xda-developers.com/showthread.php?t=1568792
And try to become my phone back...
At least, the phone enter in flashmode, and i can flash with flashtools... but the phone never come back... just the brick
I tryed to flash with the Xperia_2011_FreeXperia_ALL.ftf file and OK
Afther that, take out the USB and flash again with one ROM i get from here:
Xperia Mini Pro (SK17i)
4.0.2.A.0.42 - http://www.mediafire.com/?hevz3x5w9pqt24q
4.1.B.0.431 - http://www.mediafire.com/?j0bdx06zz5skvzt
But the phone never works. One time afther flashing with 4.0.2.A.0.42 i noticed, that trying to power on the phone, the red led shyne 3 times, and thats supposed to be the battery. But i don't know if the battery now is charged. I've left it hours charging, and hours too to the USB...
Supposedly, i cant flash without battery in the phone, but flashtools finish correctly
So... any idea?
There is something i can do?
Thank all of you who read this!
Click to expand...
Click to collapse
Hi Milven,
I got the same problem with you yesterday. Few hours sitting in front of my PC and hopeless.
I tried everything same as yours, finally I found and solve the case.
Install this http://www.sonymobile.com/global-en/tools/update-service/
And let it update your phone.
Done. It's back to brand new.
Hope you read this.
frdnoer said:
Hi Milven,
I got the same problem with you yesterday. Few hours sitting in front of my PC and hopeless.
I tried everything same as yours, finally I found and solve the case.
Install this http://www.sonymobile.com/global-en/tools/update-service/
And let it update your phone.
Done. It's back to brand new.
Hope you read this.
Click to expand...
Click to collapse
That's true. Try fixing it by using sony repairment. I did it and it worked for my phone. I hope it does for you
Sent from my Xperia, Asri Aisyah El Zahra
i've the same problem as you. charge your battery with desktop charger. not too long, i put the battery and flash firmware in flashtool. and it work. when the flashing done and the device on, my battery just 3% lol. flashing with flashtool only takes a few minutes
Hi,
My x10 shut down today after experiencing massive battery drain. When I plugged it into the charger, it didn't restart. I've tried flashing two different kernels, the FeraKernel for GB and DoomKernel. I also tried flasing the evervolv ftf file as a last resort. No change.
Is it dead? Anything I can do?
Flash original firmware with flashtool, also try to charge the battery and check if it isn't broken.
Sent from galaxy n7105
jakuburban said:
Flash original firmware with flashtool, also try to charge the battery and check if it isn't broken.
Sent from galaxy n7105
Click to expand...
Click to collapse
I checked the forums for the ftf file of the original firmware..I haven't found it till now. Anybody have it? Or could someone point me in the right direction?
inadequate said:
I checked the forums for the ftf file of the original firmware..I haven't found it till now. Anybody have it? Or could someone point me in the right direction?
Click to expand...
Click to collapse
Here's some: http://www.4shared.com/file/4xFnQHGj/sony_ericsson_x10i_21a0435_ora.html
jakuburban said:
Here's some: http://www.4shared.com/file/4xFnQHGj/sony_ericsson_x10i_21a0435_ora.html
Click to expand...
Click to collapse
Thanks. But when I flashed that, it wouldn't start up properly. I saw the Sony Ericsson logo for a second or two before the screen turned off again. WHen I tried to turn it on again, the red led flashed three times.
EDIT : after plugging it in, it woke up again. Looks like the X10 really won't die!
P.S you forgot to mention that that was an Eclairs ROM
inadequate said:
Thanks. But when I flashed that, it wouldn't start up properly. I saw the Sony Ericsson logo for a second or two before the screen turned off again. WHen I tried to turn it on again, the red led flashed three times.
Click to expand...
Click to collapse
From what you're indicating it sounds like your battery is dead/not holding a charge.
[a] You probably need a new battery, or charge the existing one for a good 12hrs and then see if it still holds a charge,
If not then go back to [a]
If possible you can just use SEUS (Sony Update Service) or PC Companion to flash the stock GB 2.3 Sony firmware.
inadequate said:
Thanks. But when I flashed that, it wouldn't start up properly. I saw the Sony Ericsson logo for a second or two before the screen turned off again. WHen I tried to turn it on again, the red led flashed three times.
EDIT : after plugging it in, it woke up again. Looks like the X10 really won't die!
P.S you forgot to mention that that was an Eclairs ROM
Click to expand...
Click to collapse
Well, I have always used this ROM to repair my Xperia.
The name was 2.1, so You could have seen that it's eclair.
And if You're still having problems with phone shuting down then it's for sure the battery, I had this problem.
Hello there,
I am having a problem with my Xperia X10a.
Was using ferraKernal v25 with ferrarom. Everything was working fine until yesterday.
PROBLEM: When i try to power my phone on, it vibrates for a short time with a single blink of green but the phone wont turn on.
SOLUTION TRIED:
1. Battery ok.
2. Flashtool 0.2.9 gb ready (flashing aborted)
3. Flashtool 0.9.18 (gets stuck at Processing of loader_unlocked.sin finished.)
4. pc companion (This device has no updates)
Below is the screenshot from flashtool.
Is there anyway to solve this problem. ?
Thank you.
Come on guys 23 views without reply..
Seriously no one of the respected xda have the ans !!!!!
really ????
born_high said:
Come on guys 23 views without reply..
Seriously no one of the respected xda have the ans !!!!!
really ????
Click to expand...
Click to collapse
Have you tried, or are you able to get into recovery? If so , maybe you can do a backup ( if there's anything to backup ) and then reflash the rom. Or if you already have a backup, do a restore.
ph0n3n3rd said:
Have you tried, or are you able to get into recovery? If so , maybe you can do a backup ( if there's anything to backup ) and then reflash the rom. Or if you already have a backup, do a restore.
Click to expand...
Click to collapse
i am unable to turn the phone on completely, how can i get into recovery then..Its a green led vibration and full black screen..
tried flashing stock and custom rom also..ended in those two results with flashtool, mentioned above
Anything else ???
and thank you for replying..at least someone did reply
born_high said:
i am unable to turn the phone on completely, how can i get into recovery then..Its a green led vibration and full black screen..
tried flashing stock and custom rom also..ended in those two results with flashtool, mentioned above
Anything else ???
and thank you for replying..at least someone did reply
Click to expand...
Click to collapse
To get into recovery you need to press the power button , then continually press the back button, ( don't hold it but keep pressing on off on off for about 30 seconds ). Only with the phone and battery, no USB cable! If you don't have any success with recovery you may need to flash a stock firmware.
Did you root the phone or purchase it already rooted? Do you know what firmware was on the phone before it was rooted?
This might help [REF][INDEX][Guide][How/Where-To] ALL-IN-ONE Consolidated X10 INFO | ROMs/THEMEs List 1 2 3
ph0n3n3rd said:
To get into recovery you need to press the power button , then continually press the back button, ( don't hold it but keep pressing on off on off for about 30 seconds ). Only with the phone and battery, no USB cable! If you don't have any success with recovery you may need to flash a stock firmware.
Did you root the phone or purchase it already rooted? Do you know what firmware was on the phone before it was rooted?
This might help [REF][INDEX][Guide][How/Where-To] ALL-IN-ONE Consolidated X10 INFO | ROMs/THEMEs List 1 2 3
Click to expand...
Click to collapse
Well..as i opened the thread with some statements above mate..
I was already using a Feravolt rom and kernel..And i rooted it and then flashed.
And obviously i know what/how to get into recovery.
But the thing is its not working without any good reason...
Situation like this happened to me before..
i was able to sues it then with stock..
But nothing seems to work now.
I guess i am not worth the seniors attention in here.
I shouldnt have opened the thread at the first place
but Hey, thanks for at least trying to help
Can you do a small test for me? I would like you to put the entire phone into a freezer ( not fridge ) for ten minutes, then take it out and see if it will power up. Will not harm the phone, I do it with an HD2.
ph0n3n3rd said:
Can you do a small test for me? I would like you to put the entire phone into a freezer ( not fridge ) for ten minutes, then take it out and see if it will power up. Will not harm the phone, I do it with an HD2.
Click to expand...
Click to collapse
Hahaha are you for serious XD. !!!
I recall someone(senior member) from xda once posted somewhere that, one thing putting the phone into freezer can do is just damage your phone
still i will give it a shot..its dead anyway..
will let you know
ph0n3n3rd said:
Can you do a small test for me? I would like you to put the entire phone into a freezer ( not fridge ) for ten minutes, then take it out and see if it will power up. Will not harm the phone, I do it with an HD2.
Click to expand...
Click to collapse
okay i did what you said without a solve to the problem..thought to let you know
Cheers to another dead Xperia x10.
As the developers are ignorant of the problem.
use this!
it will work.
http://forum.xda-developers.com/showthread.php?t=1504809
i have registered just for you
omi17 said:
See here>>>http://pune.quikr.com/Hard-Brick-Phone-Repair-Through-Riff-Z3X-Box-Aka-Jtag-Services-In-India-W0QQAdIdZ200482728
Click to expand...
Click to collapse
are you freaking trolling me
get lost with ads :/