when i plug my phone in via usb and run motofail....i have usb debugging checked, usb is in pc mode, and all drivers are installed but when i go to hit enter to complete root, it says :
waiting for device........
daemon not running.....starting it now*
daemon started successfully*
...........and thats all i get, cant get any further....please help???
maybe try CASUAL for rooting? worked for me.
I think you need usb mode on charge only.
Sent from my XT910 using xda premium
I have no idea what that CASUAL is....please post a link for it if you can, but in the meantime, im going to try putting my usb connection on charge only.....standby.
Appreciate the help!
MTP USB Device- Failed?
ok, now i cannot seem to get past this issue when installing the drivers to root my razr....anyone know how i can fix this or make it successful?? getting kinda irritated with this phone now
ok now i put my usb connection to charge only and when i hit enter to root...all it says now is waiting for device.....and stays that way....
can someone please tell me the correct way to do this before i really mess this phone up?
blueizee said:
ok now i put my usb connection to charge only and when i hit enter to root...all it says now is waiting for device.....and stays that way....
can someone please tell me the correct way to do this before i really mess this phone up?
Click to expand...
Click to collapse
Have you activated the debug mode?
When you connect your device as charge only, did it load the ADB drivers?
If your answer is no or "i don't know" then you need to download and install the motorola ADB drivers.
That is why it's not seeing your device in charge only mode. The ADB interface driver is missing from your computer.
dellenrules said:
When you connect your device as charge only, did it load the ADB drivers?
If your answer is no or "i don't know" then you need to download and install the motorola ADB drivers.
That is why it's not seeing your device in charge only mode. The ADB interface driver is missing from your computer.
Click to expand...
Click to collapse
You can verify this in the device manager.
Sent from my DROID RAZR using xda premium
It happen to me once i solved doing a factory reset then running motofail
Enviado desde mi DROID RAZR usando Tapatalk
blueizee said:
I have no idea what that CASUAL is....please post a link for it if you can, but in the meantime, im going to try putting my usb connection on charge only.....standby.
Appreciate the help!
Click to expand...
Click to collapse
It's in the development forum. It automates the motofail process.
I didn't have to put my USB connection to charge only, I think that's a red herring.
Sent from my DROID RAZR using XDA
Connect your device in device only to your computer. Verify that the ADB interface driver is connected.
If it is not, then you need to get and install those drivers.
Make sure its the data cable that came with the phone, I had the same message "waiting for device" while using an older data cable until I used the correct one then it worked for me! hope this helps if not good luck!
Related
Good Afternoon XDA,
I have run into a slight problem with my Atrix 4G. When I try to root I click on the "root" button (yes it is in USB Debugging) and it just says, "Waiting for Device" then SuperRoot becomes Non-Responsive and nothing happens from there.
Any advice or help?
Thank You.
Silly question but did you install the drivers?
u need the Motorola ADB driver
Also, try this...turn off USB debugging, start the one click app. When it says "waiting for device", go to you atrix and turn USB debugging back on.
Got it to work...just restarted computer.
Heh
Rydsmith said:
Got it to work...just restarted computer.
Heh
Click to expand...
Click to collapse
It's usually something stupid like that lol.
Sent from my MB860 using Tapatalk
Every time I plug it in the PC says USB device not recognized!?? The device has malfunctioned yes i have the drivers
WTF I t has never done this before
I am in download mode this happens when you unplug it during ODIN install so my phone needs to be recognized in order to go back to stock.
Get Windows 7
Sent from my SGH-T959 using XDA App
i have windows 7
Then delete the drivers. I've never downloaded drivers before on my laptop. You can also change wires and USB ports
Sent from my SGH-T959 using XDA App
i dont hvae an extrAONE
Go borrow one lol
Sent from my SGH-T959 using XDA App
try another USB port?
sotodefonk said:
try another USB port?
Click to expand...
Click to collapse
already did same stuff
This happens all the time on my other Windows 7, i gave it to my bro, i didnt' want it...
but what worked for me is switching computers... it just did idk how.
Try another computer, windows XP works best with me everytime dunno why.
thnaks will try tomorrow at my firends house
I had the same problem everyone was telling me that was download mode but it wasn't so get into download with the following instructions.
1. Open odin do not skip this step as you need to open odin first.
2. Take out the battery to turn off the completely
3. Put the battery back in.
4. While holding the two volume buttons plug in your usb cable. Bam your in download mode
Trust me on this method as I freaked out trying to fix it but it worked. Keep trying if it doesn't work.
Sent from my GT-I9000 using XDA App
^ hes not having trouble getting into download mode.. It's the phone isn't recognized by pc...
Have tried restarting your comp yet...? After uninstalling your current drivers than reinstalling after a reboot.
But that isn't download mode I'm sure of it
xriderx66 said:
^ hes not having trouble getting into download mode.. It's the phone isn't recognized by pc...
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
From my experience the usb port on your device is ruined.... The only way I can think of fixing it is desolder the usb port and solder a new one.... Get a new board for your phone or.... send to samsung. I had the same problem Mine was like a brick and I just send it to samsung.
NO!!!!!!!!!!!
I tried a new USB and it still didn't work.
Did you delete/install the new drivers, correctly?
What rom were you on? you made need the nexus s drivers if cm7/miui
EDIT, also, i have posted many times that ODIN NEVER works for me when my webcam is connected. Unplug it and reboot.
s15274n said:
Did you delete/install the new drivers, correctly?
What rom were you on? you made need the nexus s drivers if cm7/miui
EDIT, also, i have posted many times that ODIN NEVER works for me when my webcam is connected. Unplug it and reboot.
Click to expand...
Click to collapse
Wow thought I was going crazy on my windows 7 computer, if I leave my web cam plugged odin doesn't work, thankfully I have a desktop, so its easy as to the pull the cord
Heres my issue, when I plug the usb cable in it doesnt connect to the PC. it tries to connect but then Windows say its disconnected. For kicks I went in to RSD and it connected and was able to flash back to stock, (I was on stock but just rooted). I am fully stock now and still have the same issue. Does anyone have any suggestions? I have tried multiple cables and 2 different PC's.
Thanks for any help!
Does the usb menu come up on the phone? Select storage device.
Reinstall the drivers from Moto.
Google usbdeview.exe un install all moto drivers reboot computer. Plug phone in let computer reload all the drivers.
http://www.nirsoft.net/utils/usb_devices_view.html
Sent from my MB855 using xda premium
rbeavers said:
Does the usb menu come up on the phone? Select storage device.
Reinstall the drivers from Moto.
Google usbview.exe un install all moto drivers reboot computer. Plug phone in let computer reload all the drivers.
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
Hi, thanks for the info I tried uninstalling and when I plug the phone in it pops up USB Connection then goes away and PC say Device unplugged, but phone will charge. Wondering if the port is bad.
In the notifications at the top does it show the USB icon. Can you open it to see the options?
rbeavers said:
In the notifications at the top does it show the USB icon. Can you open it to see the options?
Click to expand...
Click to collapse
i too have similar problem the rsd flash process fails in remuneration with windows prompting usb malfunctioned
i request to give a solution
My LG E970 does not have an usb connection to the computer.
I tried connecting in fastboot and ADB via command prompt, the computer does not see it.
It says slow charging when connected to a computer, 2 different computers.
I have the LG united drivers installed, reinstalled and rebooted.
I was on 4.4 and I did a restore to stock ATT 4.1.2, still no luck.
I'm out of ideas.
EDIT:
I tried LGNPST from: http://pastebin.com/bRpR3aB6
I put it into download mode and the phone shows "DOWNLOAD MODE" "DO NOT UNPLUG the device until the process is complete"
It only shows that, LGNPST does not detect anything.
edroit said:
My LG E970 does not have an usb connection to the computer.
I tried connecting in fastboot and ADB via command prompt, the computer does not see it.
It says slow charging when connected to a computer, 2 different computers.
I have the LG united drivers installed, reinstalled and rebooted.
I was on 4.4 and I did a restore to stock ATT 4.1.2, still no luck.
I'm out of ideas.
EDIT:
I tried LGNPST from: http://pastebin.com/bRpR3aB6
I put it into download mode and the phone shows "DOWNLOAD MODE" "DO NOT UNPLUG the device until the process is complete"
It only shows that, LGNPST does not detect anything.
Click to expand...
Click to collapse
From there you need to select the ls970.dll and the bin file in lgnpst.
Sent from my Optimus G using xda app-developers app
mikeylikey said:
From there you need to select the ls970.dll and the bin file in lgnpst.
Sent from my Optimus G using xda app-developers app
Click to expand...
Click to collapse
It won't let you select anything unless something is detected. Example: "UNKNOWN PORT 01"
And nothing is detected.
edroit said:
It won't let you select anything unless something is detected. Example: "UNKNOWN PORT 01"
And nothing is detected.
Click to expand...
Click to collapse
Try Kush's universal adb drivers for windows. If you are running Win8.1, make sure it's usb2.0 and not 3.0. If it still doesn't see it, try a different windows os.
Sent from my Optimus G using xda app-developers app
mikeylikey said:
Try Kush's universal adb drivers for windows. If you are running Win8.1, make sure it's usb2.0 and not 3.0. If it still doesn't see it, try a different windows os.
Sent from my Optimus G using xda app-developers app
Click to expand...
Click to collapse
I tried the different drivers, still "slow charge mode on the phone." It is suppose to pop up that USB debugging notification on the phone if it senses a computer connection. I'm using windows 7 and usb 2.0 only. Tried on different computer, still slow charging mode.
did you turn on "usb debug" in setting->Develop options?
savingwizard said:
did you turn on "usb debug" in setting->Develop options?
Click to expand...
Click to collapse
Yes, it is on. Still only "slow charging mode"
Still not working after I flashed SnowLepoardJB's 800MB+ stock ROM. Any other suggestions?
Hi, I'm joining this thread since I have the same problem... My phone charges, but no device connection. Could there be a kernel module missing? Is there a way to check? A #lsmod type command?
Sent from my JY-G3 using xda app-developers app
Ok... I got a new USB cord and it works now.
Sent from my JY-G3 using xda app-developers app
brainstormtrooper said:
Ok... I got a new USB cord and it works now.
Sent from my JY-G3 using xda app-developers app
Click to expand...
Click to collapse
Good for you. I tried different USB cords, and it still doesn't work.
Well, if you can select USB debugging and charge the phone over USB, but the phone doesn't notice the computer then it may be a damaged USB port... I saw a thread about that on a Kindle I think... But it sounds like software isn't the problem... Good luck.
Sent from my JY-G3 using xda app-developers app
I recently had the same problem and my solution was to use the Koush Universal ADB Driver recommended by someone else. Prior to that all I could see the contents of my SD card and external SD card on the computer but always had some sort of driver issues and Windows telling me my driver wasn't installed correctly.
Using the official LG driver from the website didn't seem to help either.
OK... I know this thread has gotten old, but here's the final deal... It wasn't "exactly" the USB cables. It WAS the plug. The plug wasn't broken, just very dirty. I cleaned it out with a toothpick and now even the old cord works fine... So if you can't get the computer and phone to recognize each other, try cleaning the micro port in the phone
Sent from my JY-G3 using XDA Free mobile app
can't connect in download mode with Windows 8.1
brainstormtrooper said:
OK... I know this thread has gotten old, but here's the final deal... It wasn't "exactly" the USB cables. It WAS the plug. The plug wasn't broken, just very dirty. I cleaned it out with a toothpick and now even the old cord works fine... So if you can't get the computer and phone to recognize each other, try cleaning the micro port in the phone
Sent from my JY-G3 using XDA Free mobile app
Click to expand...
Click to collapse
My issue is that I can't connect to my computer with Windows 8.1 in Download Mode. If I want to flash, I need to find a friend who is using Windows 7. Can anybody help with this?
Other details: I've tried cleaning the ports, using another cable, using other USB connections, etc. When in Download Mode, SDK can't even detect the device. I'm pretty sure it's the fact that I'm using Windows 8.1, but I don't know what to do to fix this problem.
Thanks!
billp000 said:
My issue is that I can't connect to my computer with Windows 8.1 in Download Mode. If I want to flash, I need to find a friend who is using Windows 7. Can anybody help with this?
Other details: I've tried cleaning the ports, using another cable, using other USB connections, etc. When in Download Mode, SDK can't even detect the device. I'm pretty sure it's the fact that I'm using Windows 8.1, but I don't know what to do to fix this problem.
Thanks!
Click to expand...
Click to collapse
Not sure why you want to put your phone in download mode
If your just trying to connect your phone via USB to mount storage (meaning getting file off the internal storage and sd card), it should work fine.
If your trying to root your phone, you need to grab the android sdk and use the adb commands.
Gysper said:
Not sure why you want to put your phone in download mode
If your just trying to connect your phone via USB to mount storage (meaning getting file off the internal storage and sd card), it should work fine.
If your trying to root your phone, you need to grab the android sdk and use the adb commands.
Click to expand...
Click to collapse
The reason is that my phone is "bricked." I'm caught in a boot loop. The bootloader is locked on my LG phone so I can only get into Download Mode to fix stuff. But I can't fix stuff if my computer doesn't recognize my device. (I can connect fine when my phone boots up properly; just not in Download Mode). I've installed and uninstalled the LG drivers many times, so this is not the issue. What can I do with my Windows 8.1 computer to connect with my phone in Download Mode? Again, I CAN connect to Windows 7 computers, but I don't have one convenient to use, and I don't want to install lots of software on friends' computers...
billp000 said:
The reason is that my phone is "bricked." I'm caught in a boot loop. The bootloader is locked on my LG phone so I can only get into Download Mode to fix stuff. But I can't fix stuff if my computer doesn't recognize my device. (I can connect fine when my phone boots up properly; just not in Download Mode). I've installed and uninstalled the LG drivers many times, so this is not the issue. What can I do with my Windows 8.1 computer to connect with my phone in Download Mode? Again, I CAN connect to Windows 7 computers, but I don't have one convenient to use, and I don't want to install lots of software on friends' computers...
Click to expand...
Click to collapse
Try these steps and see if it works: http://forum.xda-developers.com/showthread.php?t=2013067
Gysper said:
Try these steps and see if it works: http://forum.xda-developers.com/showthread.php?t=2013067
Click to expand...
Click to collapse
That is what I would like to be able to do, but it assumes your device is recognized. One of the other posts on the same thread mentioned a similar issue but didn't mention a solution.
I've done some more exploring. I have, again, uninstalled and reinstalled the appropriate LG E970 drivers from the LG support site.
- When I am in fastboot mode, I see the attached image "01 Android.png" in device manager.
- When I am in recovery mode, I see the attached image "02 LG E-970.png" in device manager.
- When my phone fully boots up, I see the attached image "03 LGE Android MTP Device.png" in device manager. At this point, and only at this point, abd will list my phone as a device.
The problem is, I need a connection to my computer from recovery / download mode in case of a boot loop.
Can anyone help?
was able to root my phone using the steps described in the forums where the PC recognized the device with no problems every step of the way. however after getting root whenever I plug in the phone to a PC I no longer see it connected via Windows or via adb. I've tried rebooting both PC and phone, changing between MTP and PTP, as well as reinstalling the LG and adb driver, but no dice. Interestingly though I can use fastboot on the PC to update TWRP and boot TWRP, but nothing else. I feel like a setting somewhere might need to be changed, but it seems I've done everything I know of... any suggestions?
dimm0k said:
was able to root my phone using the steps described in the forums where the PC recognized the device with no problems every step of the way. however after getting root whenever I plug in the phone to a PC I no longer see it connected via Windows or via adb. I've tried rebooting both PC and phone, changing between MTP and PTP, as well as reinstalling the LG and adb driver, but no dice. Interestingly though I can use fastboot on the PC to update TWRP and boot TWRP, but nothing else. I feel like a setting somewhere might need to be changed, but it seems I've done everything I know of... any suggestions?
Click to expand...
Click to collapse
Re enable adb debugging on the phone settings.
Sent from my LG-H901 using XDA Premium HD app
cameljockey1 said:
Re enable adb debugging on the phone settings.
Sent from my LG-H901 using XDA Premium HD app
Click to expand...
Click to collapse
tried revoking USB debugging authorizations and toggling the USB debugging option... Windows now sees it in 'Device Manager', but I don't see any way to access it when I go to 'My Computer'! Also tried toggling between MTP and PTP, no luck...
dimm0k said:
tried revoking USB debugging authorizations and toggling the USB debugging option... Windows now sees it in 'Device Manager', but I don't see any way to access it when I go to 'My Computer'! Also tried toggling between MTP and PTP, no luck...
Click to expand...
Click to collapse
Unplug from computer. Disable usb debug adb. Connect in computer in different port and see if it installs anything. If so wait till done. Then unplug and enable adb and plug in same port from before.
Sent from my LG-H901 using XDA Premium HD app
cameljockey1 said:
Unplug from computer. Disable usb debug adb. Connect in computer in different port and see if it installs anything. If so wait till done. Then unplug and enable adb and plug in same port from before.
Sent from my LG-H901 using XDA Premium HD app
Click to expand...
Click to collapse
argh, no dice! everything you detailed happened, but still nothing listed in 'My Computer'!
dimm0k said:
argh, no dice! everything you detailed happened, but still nothing listed in 'My Computer'!
Click to expand...
Click to collapse
Try this have it unplugged. Turn off. Hook up to computer. Let it do its thing then turn on phone while plugged in
Sent from my LG-H901 using XDA Premium HD app
Device Manager
Do you see the phone in device manager when it is plugged in?
cameljockey1 said:
Try this have it unplugged. Turn off. Hook up to computer. Let it do its thing then turn on phone while plugged in
Sent from my LG-H901 using XDA Premium HD app
Click to expand...
Click to collapse
Tried this with no luck =(
bkgibby said:
Do you see the phone in device manager when it is plugged in?
Click to expand...
Click to collapse
yes, before creating this post it also showed in Device Manager, but it showed up with an exclamation saying the device could not be started. now it shows up as working properly, but no way to access it.
anyone have any other solutions/suggestions?
dimm0k said:
anyone have any other solutions/suggestions?
Click to expand...
Click to collapse
Try to unroot and see if it works.
sully9292 said:
Try to unroot and see if it works.
Click to expand...
Click to collapse
same error, i unroot this phone and works fine again debbuging...
---------- Post added at 10:17 PM ---------- Previous post was at 09:41 PM ----------
dimm0k said:
was able to root my phone using the steps described in the forums where the PC recognized the device with no problems every step of the way. however after getting root whenever I plug in the phone to a PC I no longer see it connected via Windows or via adb. I've tried rebooting both PC and phone, changing between MTP and PTP, as well as reinstalling the LG and adb driver, but no dice. Interestingly though I can use fastboot on the PC to update TWRP and boot TWRP, but nothing else. I feel like a setting somewhere might need to be changed, but it seems I've done everything I know of... any suggestions?
Click to expand...
Click to collapse
i fix this using this, download magisk16.zip and re-root using twrp, before that reboot phone and usb debbuing will come works again! if you use latest Magisk16.6 you lost again USB debbugging