[Q] Old radio still showing after flashing new one. - Android Q&A, Help & Troubleshooting

Hi all,
I have just flashed to radio 12.65.60.29_26.14.04.28_M for the Android Revolution rom (Latest)
When I boot into bootloader, it is still showing as the previous radio (26.03.02.26_M)
Does anyone know why this is occurring?
Any help would be appreciated.
lfcwiggo

Try flashing it again and see if any error messages pop up.
It might have failed for some reason last time you flashed it.

456456 said:
Try flashing it again and see if any error messages pop up.
It might have failed for some reason last time you flashed it.
Click to expand...
Click to collapse
I tried to flash again but still the same. The progress bar shows it as being installed on the phone with no errors, but still the same.
Thanks for your input.

Related

[Q] WIFI Error.

Lets see if anyone can help....a lot of this talk of rooting and flashing is over my head...My atrix is running 2.3.4. It was like this when I got it. The wifi won't turn on at all. It only shows error. Is there anyway that I can put it back to 2.2? Or is there anyway to fix the error. Someone told me the kernels may be different??? Is putting a different ROM on the phone very difficult?
Where did you get it from?
yes it may be over your head a little but no means to stop reading up on it and remember to search before your post - there is another thread of this that was recently posted.
http://forum.xda-developers.com/showthread.php?t=1180494&highlight=wifi+error
none the less. we would need more details. what rom you are using, what version of the device you have (US or Intl) key would be going through the thread you got it from. but more than likely the cause is you flashed a kernel/rom that doesn't work with your device it will be an easy fix once the details are given.
I had this issue too... I tried a few different methods to remedy it but the only one that worked was flashing a new ROM.
okay it is a US Version...4.5.91
kernel version....2.6.32.9 ( then below that is says [email protected] #11)
ok so you used an at&t rom on an at&t device? and i assume u kept the same kernel.
No...the phone came like this...I didn't do any of the updates or anything.
I had the same issue after I restored once. Could not fix it...had to reflash a ROM and the problem was fixed.
sent from my unlocked MB860 via Tapatalk
okay so is reflashing the ROM difficult? Is there any thread on here or somewhere else that I can read up on that would be of help doing this. I don't wanna brick this phone but I need the wifi or my data plan is screwed...
I hate to revive this thread but I have a wifi error I can't resolve. I first got it on 1.8.3 and flashed to 2.3.4 and it was gone. Then when I tried to install the new adroidmarket.apk, I got the wifi error and it won't go away no matter how many roms I try to or how many times reflash 2.3.4.
Essentially, wifi says there's an error and any time it tries to turn on, it reboots the phone. I've tried Alien, and Ninja and neither of them worked. I haven't tried piCrust yet.

[Q] BIG problem - Stuck on Gingerbread 2.3.3 (old I know) trying to change custom ROM

Hi there, ive looked all over online and on here for about a week solid now for a solution for this and cannot find one anywhere! My situation is.. im running gingerbread 2.3.3 on my S2 that I got in 2011. As soon as I got it I flashed the Lite'ning ROM to it. It worked fine up until christmas just gone and just all of a sudden started saying this error message when I tried to open anything, such as messages, contacts, google, camera etc..
"sorry the application ..... (process com.android.vending) has stopped unexpectedly. please try again"
So I have just been trying to get the phone back to orignal factory settings by putting a factory ROM on, or install a new custom ROM in the hope that this will solve the problem and get the phone working normally again. I used Odin and installed a custom ROM successfully (so I thought) but when I rebooted the phone I was still stuck on Lite'ning ROM and everything was how it was before. The same happened when I installed a factory ROM. I also tried to install a custom ROM via the SD card, but this failed everytime.
One other thing.. when I restore to factory settings while on the CMW and then reboot the phone.. nothing has gone, its exactly the same, with all my contacts, pictures and apps. I never knew it would be so hard to restore my phone. Im hoping someone here can advise me on what to do... Ive a feeling it might be to do with the fact the phone is gingerbread 2.3.3 and all the custom ROMs now are made for ICS or Jelly Bean? If so how do I get my phone to work with these ROMs. Thanks for reading and I really hope someone can help!
alexandamusic said:
Hi there, ive looked all over online and on here for about a week solid now for a solution for this and cannot find one anywhere! My situation is.. im running gingerbread 2.3.3 on my S2 that I got in 2011. As soon as I got it I flashed the Lite'ning ROM to it. It worked fine up until christmas just gone and just all of a sudden started saying this error message when I tried to open anything, such as messages, contacts, google, camera etc..
"sorry the application ..... (process com.android.vending) has stopped unexpectedly. please try again"
So I have just been trying to get the phone back to orignal factory settings by putting a factory ROM on, or install a new custom ROM in the hope that this will solve the problem and get the phone working normally again. I used Odin and installed a custom ROM successfully (so I thought) but when I rebooted the phone I was still stuck on Lite'ning ROM and everything was how it was before. The same happened when I installed a factory ROM. I also tried to install a custom ROM via the SD card, but this failed everytime.
One other thing.. when I restore to factory settings while on the CMW and then reboot the phone.. nothing has gone, its exactly the same, with all my contacts, pictures and apps. I never knew it would be so hard to restore my phone. Im hoping someone here can advise me on what to do... Ive a feeling it might be to do with the fact the phone is gingerbread 2.3.3 and all the custom ROMs now are made for ICS or Jelly Bean? If so how do I get my phone to work with these ROMs. Thanks for reading and I really hope someone can help!
Click to expand...
Click to collapse
I think you should try a 3-files odin flash rom.
If you search in google for "Odin 3-files i9100" than you will find the rom

Lost radio after kernel install

So tonight I've run into an issue that confounds me. I am a veteran flasher of roms and kernals and never have I found myself so stuck.
I did the following:
1. I applied Facepalm S-Off to my phone earlier and it worked fine, data still worked.
2. I later went to flash Beastmode. I was running Cubed and forgot to reset to stock before flashing.
3. My phone wouldn't boot. So I flashed back Cubed with Fastboot, and the phone boots.
The issue is that now I have no radio. I see the Verizon Wireless on the lockscreen and there are bars on the top bar, however whenever I try to make a call, it says call ended unexpectedly (paraphrase) and whenever I send a text it says SMS Problems. I have wifi, but I need my phone to work as a phone! It also says "Preparing SIM" every few minutes. Any ideas what could be wrong here?
I am currently on NOS N7 with the included Beastmode Kernel.
Thank you in advance for helping me out! I'm a little lost here.
I really hate to bump things, but I need a phone that is... well a phone. If anyone can help that would be great. I am going to have to go to Verizon if not. I have reset everything including unlock flags to stock in preparation of that sad reality.
flash a stock rom and different kernel
azhockey said:
So tonight I've run into an issue that confounds me. I am a veteran flasher of roms and kernals and never have I found myself so stuck.
I did the following:
1. I applied Facepalm S-Off to my phone earlier and it worked fine, data still worked.
2. I later went to flash Beastmode. I was running Cubed and forgot to reset to stock before flashing.
3. My phone wouldn't boot. So I flashed back Cubed with Fastboot, and the phone boots.
The issue is that now I have no radio. I see the Verizon Wireless on the lockscreen and there are bars on the top bar, however whenever I try to make a call, it says call ended unexpectedly (paraphrase) and whenever I send a text it says SMS Problems. I have wifi, but I need my phone to work as a phone! It also says "Preparing SIM" every few minutes. Any ideas what could be wrong here?
I am currently on NOS N7 with the included Beastmode Kernel.
Thank you in advance for helping me out! I'm a little lost here.
Click to expand...
Click to collapse
I'm having exactly Dane issue after flashing beastmode 4.3, how did you fix it?
Sent from my HTC6435LVW using xda app-developers app
motumbo said:
I'm having exactly Dane issue after flashing beastmode 4.3, how did you fix it?
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Return to lock using "fastboot oem lock"
Download HTC DROID DNA’s RUU.exe, this is a stock firmware by HTC, which contain radio, systems and bootloader.
make sure that your phone is being detected by your computer. then reboot it into bootloader. When you see Fastboot USB in the middle section run the ruu.exe on your computer.
This should repair bootloader and radios.
dragonstalker said:
Return to lock using "fastboot oem lock"
Download HTC DROID DNA’s RUU.exe, this is a stock firmware by HTC, which contain radio, systems and bootloader.
make sure that your phone is being detected by your computer. then reboot it into bootloader. When you see Fastboot USB in the middle section run the ruu.exe on your computer.
This should repair bootloader and radios.
Click to expand...
Click to collapse
Thanks for your answer. I've tried return to stock with success and now my phone is in full stock state but it keeps showing preparing sim card every two or three minutes exactly as it was before. When I switch the phone to 2g the problem is gone, I bought this phone online and I'm a gsm user so I own the most expensive 2g phone in market.
Phone was perfectly working in all roms and almost every kernel, the problem came up just when I flashed beastmod 4.3 kernel then I went into bootloops and I flashed stock kernel and it booted since that I've been with this issue. I'm gonna try different sim cards because I don't believe this is a software issue anymore.

[Q] Galaxy Note 3 - can't send SMS, and now can't get any mobile data at all

Galaxy Note 3 Can't send SMS or phone calls, but was receive SMS and calls at first
Hangouts was combined with SMS originally
Device was saying “No APN specified for the device”. When trying to go to Settings>Mobile network settings>Access Point Names, I get error message “Unfortunately, the process com.android.phone has stopped”
Was running cm-11-20140905-NIGHTLY-hltespr.zip at time of problem
Tried wipe/factory reset to 'clean' install of CM11, did not resolve issue
Tried updating to the most recent CM11 nightly: cm-11-20140908-NIGHTLY-hltespr.zip
This did not resolve the issue
Tried going back to an older nightly: cm-11-20140904-NIGHTLY-hltespr.zip
Did not resolve issue
Tried flashing a rooted stock ROM: http://stockroms.net/file/GalaxyNote3/SM-N900P/rooted/SM-N900P-HLTESPR-MJ4-Odex-v2.zip[1]
Did not resolve issue, this put the device into a boot loop, would not get past the Galaxy Note 3 splash screen
Flashed back to the cm-11-20140905-Nightly-hltespr.zip, this fixed the boot loop, but now I'm getting a different message
Wiped data and cache in between each flashing of a new ROM
When trying to call from the phone, it says “Mobile network not available”, and still can't get SMS to send. It no longer gives me any message about “No APN specified”, but the same error happens if I go to Settings>Mobile network settings>Access Point Names
I've found this thread but it only seems to be related to the S3/S4 http://forum.xda-developers.com/showthread.php?t=2657822[2]
Also found this: http://www.reddit.com/r/cyanogenmod/comments/1zlsrk/cant_send_sms_after_fresh_cm11_install/[3]
Google Voice is not installed, and I can't find anything in the settings about Voice+
I can't go back to CM10 because there doesn't appear to be a CM ROM for the Note 3 earlier than CM11
I've found threads with similar issues, but they are all for either Galaxy S phones, or for the Note 2. There seems to be little to no information about the Note 3 regarding this issue
At this point, the Note 3 can't send or receive any mobile data, can't make calls, and can't send messages. It's basically a WiFi only device at this point
Perhaps I need to try updating the radio? I'm honestly not sure. But there again, I can't seem to find much on the Note 3
If someone could help me out with this it would be much appreciated, as its my sister's phone and she's going to go crazy without it
EDIT:
One thing I forgot about, somewhere in there I also tried flashing a ROM for hlte, as opposed to hltespr. I think that at point is when all data stopped working
Some have suggested flashing a stable version of CyanogenMod, but there doesn't appear to be one for the Note 3, unless I'm missing something
Warlock0187 said:
Galaxy Note 3 Can't send SMS or phone calls, but was receive SMS and calls at first
Hangouts was combined with SMS originally
Device was saying “No APN specified for the device”. When trying to go to Settings>Mobile network settings>Access Point Names, I get error message “Unfortunately, the process com.android.phone has stopped”
Was running cm-11-20140905-NIGHTLY-hltespr.zip at time of problem
Tried wipe/factory reset to 'clean' install of CM11, did not resolve issue
Tried updating to the most recent CM11 nightly: cm-11-20140908-NIGHTLY-hltespr.zip
This did not resolve the issue
Tried going back to an older nightly: cm-11-20140904-NIGHTLY-hltespr.zip
Did not resolve issue
Tried flashing a rooted stock ROM: http://stockroms.net/file/GalaxyNote3/SM-N900P/rooted/SM-N900P-HLTESPR-MJ4-Odex-v2.zip[1]
Did not resolve issue, this put the device into a boot loop, would not get past the Galaxy Note 3 splash screen
Flashed back to the cm-11-20140905-Nightly-hltespr.zip, this fixed the boot loop, but now I'm getting a different message
Wiped data and cache in between each flashing of a new ROM
When trying to call from the phone, it says “Mobile network not available”, and still can't get SMS to send. It no longer gives me any message about “No APN specified”, but the same error happens if I go to Settings>Mobile network settings>Access Point Names
I've found this thread but it only seems to be related to the S3/S4 http://forum.xda-developers.com/showthread.php?t=2657822[2]
Also found this: http://www.reddit.com/r/cyanogenmod/comments/1zlsrk/cant_send_sms_after_fresh_cm11_install/[3]
Google Voice is not installed, and I can't find anything in the settings about Voice+
I can't go back to CM10 because there doesn't appear to be a CM ROM for the Note 3 earlier than CM11
I've found threads with similar issues, but they are all for either Galaxy S phones, or for the Note 2. There seems to be little to no information about the Note 3 regarding this issue
At this point, the Note 3 can't send or receive any mobile data, can't make calls, and can't send messages. It's basically a WiFi only device at this point
Perhaps I need to try updating the radio? I'm honestly not sure. But there again, I can't seem to find much on the Note 3
If someone could help me out with this it would be much appreciated, as its my sister's phone and she's going to go crazy without it
EDIT:
One thing I forgot about, somewhere in there I also tried flashing a ROM for hlte, as opposed to hltespr. I think that at point is when all data stopped working
Some have suggested flashing a stable version of CyanogenMod, but there doesn't appear to be one for the Note 3, unless I'm missing something
Click to expand...
Click to collapse
If all else fails try flasing back to stock, update profile, update prl then reroot and flash the ROM. Please follow the OP to the "T" and you should be good!
flynhawn2002 said:
If all else fails try flasing back to stock, update profile, update prl then reroot and flash the ROM. Please follow the OP to the "T" and you should be good!
Click to expand...
Click to collapse
Do you know where I can find a stock ROM? The one I have been able to find has not worked. Also, does reinstalling a stock room cause the phone to be unrooted? I thought I read somewhere that there has not been an unroot for the Note 3 released yet
I will attempt to locate a stock ROM on my own and attempt to update Profile and PRL and go from there. Thanks for the assistance!
Warlock0187 said:
Do you know where I can find a stock ROM? The one I have been able to find has not worked. Also, does reinstalling a stock room cause the phone to be unrooted? I thought I read somewhere that there has not been an unroot for the Note 3 released yet
I will attempt to locate a stock ROM on my own and attempt to update Profile and PRL and go from there. Thanks for the assistance!
Click to expand...
Click to collapse
In the development section you should be able to find a stock rom. Yes, by installing a stock rom you will loose root its as if you just got it from the store, lol.
flynhawn2002 said:
In the development section you should be able to find a stock rom. Yes, by installing a stock rom you will loose root its as if you just got it from the store, lol.
Click to expand...
Click to collapse
I was under the impression that you could be running the stock ROM and still have root access, I guess this is incorrect?
Warlock0187 said:
I was under the impression that you could be running the stock ROM and still have root access, I guess this is incorrect?
Click to expand...
Click to collapse
No, when I say stock its fresh, no root. It will be the same stockness as when you first purchase your phone!
flynhawn2002 said:
No, when I say stock its fresh, no root. It will be the same stockness as when you first purchase your phone!
Click to expand...
Click to collapse
Hmm interesting. I always thought that what software you're running and whether or not you have root access are two separate things. Don't they have rooted Stock ROMs?
Anyway, its irrelevant at this point. I've found a stock ROM I'm hoping will work, will update either way
Warlock0187 said:
Hmm interesting. I always thought that what software you're running and whether or not you have root access are two separate things. Don't they have rooted Stock ROMs?
Anyway, its irrelevant at this point. I've found a stock ROM I'm hoping will work, will update either way
Click to expand...
Click to collapse
Did you ever find a solution to this problem? I am having the same issue. I flashed a hlte rom rather than a hltespr and lost SMS and voice, but my data is still working. I tried to restore my backup and it still isn't working. Any help is appreciated.
would flashing a correct modem solve their problem?
kakiesz said:
Did you ever find a solution to this problem? I am having the same issue. I flashed a hlte rom rather than a hltespr and lost SMS and voice, but my data is still working. I tried to restore my backup and it still isn't working. Any help is appreciated.
Click to expand...
Click to collapse
Just flash an htlespr ROM and you'll be fine.
Flashed back to a Stock ROM, and everything works fine again.
Waiting until a milestone is released to try re-rooting and flashing CM again

CM 10.2 No Signal/Connection

Hello there,
I have just recently flashed CM10.2 after I went through a lot of **** as a beginner.
Thanks to blueether's help.
Anyways, I have no connection on my phone, It detects and reads tmobile, att, etc... I try to connect to them and it just doesn't work. It says; (invalid card - Emergency calls only) Even though it worked an hour ago on stock rom so I know it's not the simcard.
Anyway or anything that I can do to fix this issue I am having?
I have dual custom recovery installed philz&TWRP so I could flash anything if needed simply.
Please get back to me on this. Thanks.
malimt said:
Hello there,
I have just recently flashed CM10.2 after I went through a lot of **** as a beginner.
Thanks to blueether's help.
Anyways, I have no connection on my phone, It detects and reads tmobile, att, etc... I try to connect to them and it just doesn't work. It says; (invalid card - Emergency calls only) Even though it worked an hour ago on stock rom so I know it's not the simcard.
Anyway or anything that I can do to fix this issue I am having?
I have dual custom recovery installed philz&TWRP so I could flash anything if needed simply.
Please get back to me on this. Thanks.
Click to expand...
Click to collapse
CM10.2 will have real issues with the new baseband that you have. You will want to run cm11 or other 4.4.4 ROMs
blueether said:
CM10.2 will have real issues with the new baseband that you have. You will want to run cm11 or other 4.4.4 ROMs
Click to expand...
Click to collapse
Yes indeed you're right after what I saw today.
Now let me ask you though, where could I get the baseband drivers?
Cuz even on cm11 that I tried today, there was still no sign of any connection, I even updated to the latest one.
Any ideas? /:

Categories

Resources