Hello,
I have Pershoot's kernel installed in my HC 3.2. I use my tab to connect to my company VPN using Cisco Anyconnect. In order to stablish the VPN connection y need the tun.ko module loaded, so everytime I need to start the connection I must manually load that module (using a terminal emulator and running insmod /data/local/modules/tun.ko). This works fine but I am wondering if I can modify some system file to load that module everytime y boot the tab.
I did that on my old Xperia X8 modifying init.rc, I tried adding the insmod command in the init.rc file but it didn't worked.
Any advise about how can I load tun.ko on every boot?
Regards,
Patricio
patriciocs said:
Hello,
I have Pershoot's kernel installed in my HC 3.2. I use my tab to connect to my company VPN using Cisco Anyconnect. In order to stablish the VPN connection y need the tun.ko module loaded, so everytime I need to start the connection I must manually load that module (using a terminal emulator and running insmod /data/local/modules/tun.ko). This works fine but I am wondering if I can modify some system file to load that module everytime y boot the tab.
I did that on my old Xperia X8 modifying init.rc, I tried adding the insmod command in the init.rc file but it didn't worked.
Any advise about how can I load tun.ko on every boot?
Regards,
Patricio
Click to expand...
Click to collapse
Inatall script manager. Then create a script and make script manager run it at boot.
Sent from my MB860 using xda premium
d3athsd00r said:
Inatall script manager. Then create a script and make script manager run it at boot.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Thanks for your answer but I was looking for something more straightforward, I mean something that doesn't involve installing another app. Isn't that possible in the GT 10.1?
In CM9, you can create a script in /data/local called userinit.sh, add execution permission (chmod +x) and it will run at boot. A simple userinit.sh could be like this:
Code:
#!/system/bin/sh
insmod /data/local/modules/tun.ko
But I don't think you can do the same in your ROM. In your case (this can be done in CM9 too), add a script in /system/etc/init.d , it can be something like 91modules . Add execution permission and it can contain the same code as before. Reboot and it should load your module at boot (be sure that the path to your module is right).
Also, you can do that in one line as root in a terminal. First, be sure that your /system is mounted as rw, not ro. If you don't know how to do that, as root, in a terminal, execute:
Code:
mount -o remount,rw /system
Then:
Code:
echo -e \#\!/system/bin/sh'\n'insmod /data/local/modules/tun.ko > /system/etc/init.d/91modules | chmod +x /system/etc/init.d/91modules
Thanks MapleSyrup for your reply,
First I tried with this in the Terminal:
Code:
mount -o remount,rw /system
echo -e \#\!/system/bin/sh'\n'insmod /data/local/modules/tun.ko > /system/etc/init.d/91modules | chmod +x /system/etc/init.d/91modules
But I received a "No such file or directory Bad mode" error. So I tried creating the module in the init.d directory, but I found that directory doesn't exist in my tablet file system. If I go to /system/etc there is no init.d directory (don't even a file with that name). I am using the stock ROM, could this be the reason why I don't have the init.d directory?
patriciocs said:
I am using the stock ROM, could this be the reason why I don't have the init.d directory?
Click to expand...
Click to collapse
Yes, that's the reason. The easiest way (without using ScriptManager) is using a custom ROM. The other way is modifying the boot image. I'm not really sure how to do this, but maybe this is a start.
My recommendation, if you want to keep the stock ROM without further modification (just rooting), use ScriptManager, is simple, practical and once installed, is out of your way if you only use it to load the module at boot.
Pershoots hc3.2 has init.d support I believe, just need to make the dir for it. Ask in the kernel thread.
Sent from my SPH-D700 using XDA
Related
Anyone know how to get a script to run at every boot? I've tried putting it in /etc/, /etc/init.d, and modifying the xRecovery init.rc with no luck. Any guidance would be greatly appreciated. Thanks.
have you tried to edit the modded chargemon file? it's a part of Xrec and is a simple script which do the mounting, so appending you things at its end could do the job... I think
Adolf1994 said:
have you tried to edit the modded chargemon file? it's a part of Xrec and is a simple script which do the mounting, so appending you things at its end could do the job... I think
Click to expand...
Click to collapse
Thanks, but no dice. Script still didn't run.
kxhawkins said:
Thanks, but no dice. Script still didn't run.
Click to expand...
Click to collapse
whts the script exactly? u want to execute some other script thru chargemon?
oh btw permission are verified right? (chmod 755 <scriptname>)
Some sysctl settings, like busybox sysctl -w parameter=value
Code:
/system/etc/install-recovery.sh
This file never existed, but it's being called from init.rc during the system boot.
Rename your script accordingly and enjoy.
Cheers,
z
AWESOME, thanks so much. I'll try that in just a second...
Nope doesn't work. Would of been nice if you could of report your results after you tried it. (Changed permissions to 777 as well.)
Tried editing init.rc and a post boot script file also at / both ignored and files reverted back to originals on boot (with 1st Jan 1970 as time-stamp).
There is a init file full of random symbols and a few lines of what looks like it should belong in init.rc (mount /system ect), could this be a signed file that reloads the other files on boot or something similar? (Attached to post, had to be zipped cos this forum has a stupid limit on .txt files.)
Seems SE has gone out of its way to stop commands being executed at boot time! I'm running stock ROM. Anyone got any other ideas?
Figured it (Get in!)
I edited /system/etc/hw_config.sh
Look at that init with HTML viewer and scroll down a lot
Sent from my X10i using XDA Premium App
Hi.
I'm using a Samsung SGH-i997 Infuse 4g. GB 2.3.6
I'm using root explorer to describe file system.
I hope someone with experience with updater_script can help.
I was interested in running a command from /system/xbin.
When you run root explorer, in the root, there is a /bin folder and a /system/bin folder. They contain same commands
Commands in it will have: mount, unmount, reboot etc
To run this in updater-script, you will need this:
run_program("sbin/mount", argument etc);
I wanted to run a command in /system/xbin
These command are: (ex:chmod, clear, grep, insmod etc)
I know these commands can be included in a script file, ex: mumbojumbo.sh
and can be extracted, given permission and run as a script.
What I was interested in was if it was possible to run these from updater-script without going through a *.sh script.
Example:
run_program("system/xbin/chmod", argument);
Obviously I have tried without succeeding using different combinations
Thank you
bump
10 chars
just run_program("sbin/chmod", blah) will do.
while in recovery...connect to the adb shell and look into sbin/
I've been attempting to install Ubuntu on my Transformer Prime, using the guide included in Ubuntu Installer Free, and I seem to have run into a bit of a snag.
I've followed all the instructions, and I have the Ubuntu files on the /sdcard/ubuntu/ as instructed, but the shell script can't run because it doesn't have execute permissions, and I can't get them changed.
Whenever I run chmod it just ignores the command, and the file permissions stay the same. Being su doesn't seem to make any difference either. I've tried several file managers but none of them seem to have the ability to change file permissions either.
I have a Transformer Prime, unlocked, running the Primeval rooted stock ROM, if that helps. I have Superuser and I even installed busybox from the app on the market, in case maybe that was the issue.
Anyone have any idea what's going on here? Does the Linuxforandroid installer work any better maybe?
J Arcane said:
I've been attempting to install Ubuntu on my Transformer Prime, using the guide included in Ubuntu Installer Free, and I seem to have run into a bit of a snag.
I've followed all the instructions, and I have the Ubuntu files on the /sdcard/ubuntu/ as instructed, but the shell script can't run because it doesn't have execute permissions, and I can't get them changed.
Whenever I run chmod it just ignores the command, and the file permissions stay the same. Being su doesn't seem to make any difference either. I've tried several file managers but none of them seem to have the ability to change file permissions either.
I have a Transformer Prime, unlocked, running the Primeval rooted stock ROM, if that helps. I have Superuser and I even installed busybox from the app on the market, in case maybe that was the issue.
Anyone have any idea what's going on here? Does the Linuxforandroid installer work any better maybe?
Click to expand...
Click to collapse
You need to run it like this:
sh ubuntu.sh
...replace ubuntu.sh with the actual name of your shell script.
I don't think /sdcard allows the exec bit to be set, therefore you need to call run the script via sh
Hope this helps.
can someone explain how to use bypasslkm in further detail. i looked through multiple threads but im stilll not getting the handle on it,
Open your terminal emulator on your phone (download one from Google play if you don't have one) open the terminal and type the following commands (Pressing enter to execute each one)
su (sands for switch user, used alone will switch you to the "root" user. Equilivent to Admin in windows)
cd /data/local/temp (cd - change directory, followed by the complete folder path you want to navigate to)
chmod 755 bypasslkm (not going to get too in depth with this one because I could go on for a while with it but "chmod 755" changes the permissions to read, write, execute for the root user and read/execute for everyone else)
. /bypasslkm (. / tells the system to look in the current directory and, in this case, execute bypasslkm)
Hope this helps clear some things up for you!
Sent from my SCH-I545 using XDA Premium HD app
sfgrimes said:
Open your terminal emulator on your phone (download one from Google play if you don't have one) open the terminal and type the following commands (Pressing enter to execute each one)
su (sands for switch user, used alone will switch you to the "root" user. Equilivent to Admin in windows)
cd /data/local/temp (cd - change directory, followed by the complete folder path you want to navigate to)
chmod 755 bypasslkm (not going to get too in depth with this one because I could go on for a while with it but "chmod 755" changes the permissions to read, write, execute for the root user and read/execute for everyone else)
. /bypasslkm (. / tells the system to look in the current directory and, in this case, execute bypasslkm)
Hope this helps clear some things up for you!
Sent from my SCH-I545 using XDA Premium HD
I keep getting a message saying that there is no such directory after trying to execute "chmod 755 bypasslkm"
Click to expand...
Click to collapse
Deleted
Sent from my SCH-I545 using Tapatalk
JTSDeveloper said:
I keep getting a message saying that there is no such directory after trying to execute "chmod 755 bypasslkm"
Click to expand...
Click to collapse
I had the same issue. Here is the binary from Surges dropbox https://www.dropbox.com/s/9rdz9ff6x5foech/bypasslkm
Make sure you copy it to the right directory and follow all the commands.
Sent from my SCH-I545 using XDA Premium HD app
To add to the above post, after downloading that just execute this in terminal
Code:
su
mount -o remount,rw /system
find . -name "bypasslkm" -exec cp {} /data/local/tmp \;
find /data/local/tmp -name "bypasslkm" -type f -exec chmod 755 {} \;
./data/local/tmp/bypasslkm
insmod /system/lib/modules/dhd.ko
exit
Surge1223 said:
To add to the above post, after downloading that just execute this in terminal
Code:
su
mount -o remount,rw /system
find . -name "bypasslkm" -exec cp {} /data/local/tmp \;
find /data/local/tmp -name "bypasslkm" -type f -exec chmod 755 {} \;
./data/local/tmp/bypasslkm
insmod /system/lib/modules/dhd.ko
exit
Click to expand...
Click to collapse
I got the following error trying to execute after downloading the bypasslkm file and doing what you said
JTSDeveloper said:
I got the following error trying to execute after downloading the bypasslkm file and doing what you said
Click to expand...
Click to collapse
Thats not an error. If you had bypasslkm anywhere on your phone, it should now be in /data/local/tmp with the right permissions and should have executed. Make sure you downloaded the bypasslkm binary linked above
Edit: Also just copy and paste the whole script to make things easier
Sent from my SCH-I545 using XDA Premium 4 mobile app
Surge1223 said:
Thats not an error. If you had bypasslkm anywhere on your phone, it should now be in /data/local/tmp with the right permissions and should have executed. Make sure you downloaded the bypasslkm binary linked above
Edit: Also just copy and paste the whole script to make things easier
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It's still not working. Any ideas? Should I move it directly into /data/local/tmp
Surge1223 said:
Thats not an error. If you had bypasslkm anywhere on your phone, it should now be in /data/local/tmp with the right permissions and should have executed. Make sure you downloaded the bypasslkm binary linked above
Edit: Also just copy and paste the whole script to make things easier
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I downloaded the binary from above and pasted it directly in data/local/tmp then tried it and it still didn't work :/ what should the permissions on the file be? I'm a noob at this stuff
JTSDeveloper said:
I downloaded the binary from above and pasted it directly in data/local/tmp then tried it and it still didn't work :/ what should the permissions on the file be? I'm a noob at this stuff
Click to expand...
Click to collapse
The permissions should be 755, as Surge said.
If you KNOW it's in /data/local/tmp, then do this in a terminal emulator window:
Code:
su
mount -o remount,rw /system
chmod 755 /data/local/tmp/bypasslkm
/data/local/tmp/bypasslkm
insmod /system/lib/modules/dhd.ko
mount -o remount,ro /system
exit
If this doesn't work, DO NOT post just "it didn't work". Say what you did, why you think it failed. Capture the output and reply here with it.
Solution to the 755 bypasslkm issue!!!!!
k1mu said:
The permissions should be 755, as Surge said.
If you KNOW it's in /data/local/tmp, then do this in a terminal emulator window:
Code:
su
mount -o remount,rw /system
chmod 755 /data/local/tmp/bypasslkm
/data/local/tmp/bypasslkm
insmod /system/lib/modules/dhd.ko
mount -o remount,ro /system
exit
If this doesn't work, DO NOT post just "it didn't work". Say what you did, why you think it failed. Capture the output and reply here with it.
Click to expand...
Click to collapse
I figured it out! Here is exactly what I did:
after downloading the bypasslkm.bin from the dropbox link, I used ES File Explorer (WITH ROOT ENABLED) to move the bypasslkm file to directly to the data/local/tmp location. NOTE: there are a few places marked "data" and "local" on the phone, so when you open a "data" folder, make sure you find the path in the right order [ i.e. first data, then local, and then tmp]
Using a ROOT FILE EXPLORER app (because ES doesn't have what you will need) go to the bypasslkm file, long press, and select permissions. It will display with permissions are currently set. At the bottom, it SHOULD display the total sum of the permissions selected. Basically, that means by selecting the right boxes, you can change the permissions to 755 !
7 5 5
user group world
r+w+x r+x r+x
4+2+1 4+0+1 4+0+1 = 755
These setting will give you the 755 that you need to pull this off .
When you have the permissions changed to 755, the last step was actually very easy. But if you want to play it safe, then I will tell you the root file browser I specifically used to do the last step.
I used the app Root Browser version 2.2.3 ( i literally googled for any generic root file explorer and this came up )
ok, so when you have the permissions changed, long press on the bypasslkm file.
select "Open With" and then select the option "Open As.."
At the bottom of the options is "script file" select it.
after doing so, select the option "Execute" and... Voila! I immediately regained my WIFI !!!!! \>w</
I hope this guide helped everyone out. I tried to be as specific as possible.
EinGlo said:
I figured it out! Here is exactly what I did:
after downloading the bypasslkm.bin from the dropbox link, I used ES File Explorer (WITH ROOT ENABLED) to move the bypasslkm file to directly to the data/local/tmp location. NOTE: there are a few places marked "data" and "local" on the phone, so when you open a "data" folder, make sure you find the path in the right order [ i.e. first data, then local, and then tmp]
Using a ROOT FILE EXPLORER app (because ES doesn't have what you will need) go to the bypasslkm file, long press, and select permissions. It will display with permissions are currently set. At the bottom, it SHOULD display the total sum of the permissions selected. Basically, that means by selecting the right boxes, you can change the permissions to 755 !
7 5 5
user group world
r+w+x r+x r+x
4+2+1 4+0+1 4+0+1 = 755
These setting will give you the 755 that you need to pull this off .
When you have the permissions changed to 755, the last step was actually very easy. But if you want to play it safe, then I will tell you the root file browser I specifically used to do the last step.
I used the app Root Browser version 2.2.3 ( i literally googled for any generic root file explorer and this came up )
ok, so when you have the permissions changed, long press on the bypasslkm file.
select "Open With" and then select the option "Open As.."
At the bottom of the options is "script file" select it.
after doing so, select the option "Execute" and... Voila! I immediately regained my WIFI !!!!! \>w</
I hope this guide helped everyone out. I tried to be as specific as possible.
Click to expand...
Click to collapse
worked perfectly and all my confusion is now gone thank you.
Fix works but new issue
JTSDeveloper said:
worked perfectly and all my confusion is now gone thank you.
Click to expand...
Click to collapse
Thanks for the support. Glad I could help. Has your WIFI remained on, though? The solution I posted works, but only for a short amount of time. rebooting the system undoes the work I did and I have to go back into the root browser and execute the file all over again to get wifi.
Can Surge or someone else offer any expertise?
with the permissions changed properly, I tried executing the code, and still not working.
I have safestrap enabled, and I have sound restored. I am currently on android 4.3 from the downgrade provided by Surge. Its rooted.
If I were to upgrade to the rooted version of NC5, would that help fix the wifi issue, or would it carry over?
Any input going forward is appreciated!
EinGlo said:
Thanks for the support. Glad I could help. Has your WIFI remained on, though? The solution I posted works, but only for a short amount of time. rebooting the system undoes the work I did and I have to go back into the root browser and execute the file all over again to get wifi.
Can Surge or someone else offer any expertise?
with the permissions changed properly, I tried executing the code, and still not working.
I have safestrap enabled, and I have sound restored. I am currently on android 4.3 from the downgrade provided by Surge. Its rooted.
If I were to upgrade to the rooted version of NC5, would that help fix the wifi issue, or would it carry over?
Any input going forward is appreciated!
Click to expand...
Click to collapse
It is possible to automate this.
Create a file with the following contents:
Code:
#!/system/bin/sh
/data/local/tmp/bypasslkm
insmod /system/lib/modules/dhd.ko
exit
Save this file as /system/etc/install-recovery-2.sh.
Make sure that the bypasslkm file is in /data/local/tmp.
Reboot, and you should now have WiFi again.
[Note: this assumes SuperSU has it's custom copy of /system/etc/install-recovery.sh in place. If that's not there, it's still possible to edit /init.rc to add a stanza to run this command.]
Issue with auto-running my solution
k1mu said:
It is possible to automate this.
Create a file with the following contents:
Code:
#!/system/bin/sh
/data/local/tmp/bypasslkm
insmod /system/lib/modules/dhd.ko
exit
Save this file as /system/etc/install-recovery-2.sh.
Make sure that the bypasslkm file is in /data/local/tmp.
Reboot, and you should now have WiFi again.
[Note: this assumes SuperSU has it's custom copy of /system/etc/install-recovery.sh in place. If that's not there, it's still possible to edit /init.rc to add a stanza to run this command.]
Click to expand...
Click to collapse
I do NOT have supersu's install recovery 2 file in the location you said. I only have the regular install recovery file.
What I should I do? Could I create the file in laptops termial?
The first line of code gave me the error "file not found"
update
EinGlo said:
I do NOT have supersu's install recovery 2 file in the location you said. I only have the regular install recovery file.
What I should I do? Could I create the file in laptops termial?
The first line of code gave me the error "file not found"
Click to expand...
Click to collapse
I tried again.
Ok, so I figured out the coding a little bit. Im not used to this, so forgive my ignorance.
I did the code as u typed it. BUT I made a change. Because I kept getting the "file not found " error. I added ".bin" to the end of the bypasslkm code line. It generated a real response. I felt relieved. I went ahead and typed the last line of code.
THEN I was told the file already exists... I have attached a picture of what I got in android Terminal
EinGlo said:
I do NOT have supersu's install recovery 2 file in the location you said. I only have the regular install recovery file.
What I should I do? Could I create the file in laptops termial?
The first line of code gave me the error "file not found"
Click to expand...
Click to collapse
You should have /system/etc/install-recovery.sh
It will run /system/etc/install-recovery-2.sh if it exists. What I would do is to create the file on your PC, put it onto your SDcard on the PC, then use Root Explorer to put it into place.
The "file exists" error is because you already have the WiFi module installed. That won't happen when this script runs at boot.
Question
k1mu said:
You should have /system/etc/install-recovery.sh
It will run /system/etc/install-recovery-2.sh if it exists. What I would do is to create the file on your PC, put it onto your SDcard on the PC, then use Root Explorer to put it into place.
The "file exists" error is because you already have the WiFi module installed. That won't happen when this script runs at boot.
Click to expand...
Click to collapse
Ok. I'll try that tonight.
But I have a few questions
Im basically trying to autostart the wifi module when the phone boots up right? Are there any apps that can accomplish this specific task?
Also about the downgrade in general. Did anyone get their SD card permissions restored after downgrading? I donwgraded to 4.3, rooted the phone, and somehow I STILL cant move apps to the sd card! Im beginning to suspect that thr issue may be with the card itself, which can be fixed with formatting the sd card. But has anyone had any problems with moving apps to the sd card?
Finally, the bug question concerning the wifi issue.
Is this probkem specific only to those with the downgrade? If so, should upgrading to Surge's rooted kitkat (with sd card permissions and tethered enabled) resolve the wifi issue?
I also noticed that I had wifi access when the phone had no sound. Only when I flashed the Non-HLOS bin file did I encounter this wifi issue.
Thanks for the feedback so far, I just need to understand whrre to go from here
EinGlo said:
Ok. I'll try that tonight.
But I have a few questions
Im basically trying to autostart the wifi module when the phone boots up right? Are there any apps that can accomplish this specific task?
Click to expand...
Click to collapse
I'm sure there are programs that can be set up to run scripts as root during boot; However, that's complicated since you want this to run while the phone is booting, before there's any opportunity to allow SuperSU to ask for permission.
EinGlo said:
Also about the downgrade in general. Did anyone get their SD card permissions restored after downgrading? I donwgraded to 4.3, rooted the phone, and somehow I STILL cant move apps to the sd card! Im beginning to suspect that thr issue may be with the card itself, which can be fixed with formatting the sd card. But has anyone had any problems with moving apps to the sd card?
Click to expand...
Click to collapse
That's a problem that's fixed by an edit to /system/etc/permissions/platform.xml, adding a stanza that permits external storage write access.
EinGlo said:
Finally, the bug question concerning the wifi issue.
Is this probkem specific only to those with the downgrade? If so, should upgrading to Surge's rooted kitkat (with sd card permissions and tethered enabled) resolve the wifi issue?
I also noticed that I had wifi access when the phone had no sound. Only when I flashed the Non-HLOS bin file did I encounter this wifi issue.
Thanks for the feedback so far, I just need to understand whrre to go from here
Click to expand...
Click to collapse
The need to run the "bypasslkm" program is because of the downgrade. If you go to a clean rooted Kit Kat ROM, it shouldn't have any issues with WiFi being enabled. That may be the easiest way to fix this.
Resolution on post #10, in post #11 a second resolution and on post #12 the confirmation.
I need a init.d script to run or execute a service that is on system/bin
Is this possible?
Which commands to use?
I researched a lot, and I do not find anything about it.
The file name is jellyservice.
Jellyservice is a normal service that need to be running before run a app, without that, the app does not run.
I know that:
1. The jellyservice is presented on stock rom and the stock rom use init.rc to call the jellyservice at boot, and i can change the init.rc by change the boot.img (unpack, change, repack), but i wanna to be able to run it on any device wit any kernel, and don't wanna to change it kernel for it rom.
2. I can use SManager to run the file on boot. but i don't wanna to need a app just init.d, init.d is already implemented and working on almost every custom rom, so I put the init.d file on a zip that flash the apk, libs etc, and no more app or config is need.
Thanks.
baybutcher27 said:
I need a init.d script to run a service that is on system/bin
Is this possible?
Which commands to use?
I researched a lot, and I do not find anything about it.
The file name is jellyservice.
Jellyservice is a normal service that need to be running before run a app, without that, the app does not run.
I know that:
1. The jellyservice is presented on stock rom and the stock rom use init.rc to call the jellyservice at boot, and i can change the init.rc by change the boot.img (unpack, change, repack), but i wanna to be able to run it on any device wit any kernel, and don't wanna to change it kernel for it rom.
2. I can use SManager to run the file on boot. but i don't wanna to need a app just init.d, init.d i already have implemented on rom, so I put the init.d file on a zip that flash the apk, libs etc, and no more app or config is need.
Thanks.
Click to expand...
Click to collapse
Is this what you are looking for, or I am missing something?
http://forum.xda-developers.com/showthread.php?t=1933849
And this, which is more up to date:
http://www.xda-developers.com/init-d-support-for-any-rooted-phone/
Ciuffy said:
Is this what you are looking for, or I am missing something?
http://forum.xda-developers.com/showthread.php?t=1933849
And this, which is more up to date:
http://www.xda-developers.com/init-d-support-for-any-rooted-phone/
Click to expand...
Click to collapse
No you did not read what I wrote.
As I said, i wanna a script of init.d that runs or execute a file, i already have init.d working...
baybutcher27 said:
No you did not read what I wrote.
As I said, i wanna a script of init.d that runs or execute a file, i already have init.d working...
Click to expand...
Click to collapse
Sorry, I was assuming you could find help there. By the way, you should be able to do this just by using a script like:
#!/system/bin/sh
-Give permission
/path/jelliservice
Then place it in init.d or write a specific script for init.d to run the above one.
http://android.stackexchange.com/questions/6558/how-can-i-run-a-script-on-boot
Sorry if there's a bigger obstacle I'm not aware of.
Ciuffy said:
Sorry, I was assuming you could find help there. By the way, you should be able to do this just by using a script like:
#!/system/bin/sh
-Give permission
/path/jelliservice
Then place it in init.d or write a specific script for init.d to run the above one.
http://android.stackexchange.com/questions/6558/how-can-i-run-a-script-on-boot
Sorry if there's a bigger obstacle I'm not aware of.
Click to expand...
Click to collapse
No is all good.
but??? that willl run the service, or just give a permission.
I don't really know much about init.d script and the web does not help in that thing i wanna.
i'm implemented it now to see what that script does. :good:
baybutcher27 said:
No is all good.
but??? that willl run the service, or just give a permission.
I don't really know much about init.d script and the web does not help in that thing i wanna.
i'm implemented it now to see what that script does. :good:
Click to expand...
Click to collapse
Oh, so you are just asking for help with the actual script, fine. See if you can figure it out yourself from that post, I'm trying to build an easy example right now. I seem to not have this jelliservice you are talking about, maybe you can give me a few more insights about this.
Ciuffy said:
Oh, so you are just asking for help with the actual script, fine. See if you can figure it out yourself from that post, I'm trying to build an easy example right now. I seem to not have this jelliservice you are talking about, maybe you can give me a few more insights about this.
Click to expand...
Click to collapse
ok.
i tested that you post doesn't do what i need.
i have this on init.d to now if it works.
#!/system/bin/sh
touch /data/local/tmp/init.d_log_test.txt
echo "done" >> /data/local/tmp/init.d_log_test.txt
so i change the "done" of the last line to wherever and it time i reboot it change to wherever i wrote.
so init.d is working fine.
The jellyservice is a service that only exist on motorola stock rom on devices that have dedicated hardware of DTV.
it is started by i .rc file:
init.mmi.dtv.rc
and the content of that .rc is:
Code:
on boot
# DTV feature
service dtv-jelly /system/bin/jellyservice
class main
user system
group system audio camera graphics inet net_bt net_bt_admin net_raw sdcard_rw
iknow that is possible to implemented that .rc on any device by add it to the kernel or boot.img but it will be need to do on any rom and that is allot of work and will be impossible.
so i have created a tread to give support for that DTV to any custom rom, and i wanna to make a more completed .zip to the app.
see the thread here
baybutcher27 said:
ok.
i tested that you post doesn't do what i need.
i have this on init.d to now if it works.
#!/system/bin/sh
touch /data/local/tmp/init.d_log_test.txt
echo "done" >> /data/local/tmp/init.d_log_test.txt
so i change the "done" of the last line to wherever and it time i reboot it change to wherever i wrote.
so init.d is working fine.
The jellyservice is a service that only exist on motorola stock rom on devices that have dedicated hardware of DTV.
it is started by i .rc file:
init.mmi.dtv.rc
and the content of that .rc is:
Code:
on boot
# DTV feature
service dtv-jelly /system/bin/jellyservice
class main
user system
group system audio camera graphics inet net_bt net_bt_admin net_raw sdcard_rw
iknow that is possible to implemented that .rc on any device by add it to the kernel or boot.img but it will be need to do on any rom and that is allot of work and will be impossible.
so i have created a tread to give support for that DTV to any custom rom, and i wanna to make a more completed .zip to the app.
see the thread here
Click to expand...
Click to collapse
You are right, it's not easy to test this out because of default .rc hardcoded into kernel... in order to do this you would have to edit .rc to run that service that runs userinit.sh... Have you already done this? And, are you able to start the service manually?
Ciuffy said:
You are right, it's not easy to test this out because of default .rc hardcoded into kernel... in order to do this you would have to edit .rc to run that service that runs userinit.sh... Have you already done this? And, are you able to start the service manually?
Click to expand...
Click to collapse
i didn't try implemented that .rc on boot.img, that is too much work, and need to be done on it kernel or rom update, but yes can be done.
The file is just like any other executable, just like a .sh or any file you can execute using a app that can execute files like, root browser or SManager.
all the process to run the file is on the thread i just post.
The thing is i already know how to run it via app, but i don't wanna to stop there i wanna to run it via init.d because is a very simple way, but very difficult to find the commands.
Exists any command on init.d that can run a file commands like, run, execute, open or start ?
any of those work? and how to use they?
have any website that have all the command available on init.d?
Hey, you can run a binary from sh by just invoking its path, for example:
Code:
#!/bin/sh
/system/bin/jellyservice
The proccess will spawn with UID 0 (root)
You can change that if you have a good root binary by doing this:
Code:
#!/bin/sh
su system -c '/system/bin/jellyservice'
If you're using supersu I think you have to enable root at boot (Look at the application settings)
baybutcher27 said:
i didn't try implemented that .rc on boot.img, that is too much work, and need to be done on it kernel or rom update, but yes can be done.
The file is just like any other executable, just like a .sh or any file you can execute using a app that can execute files like, root browser or SManager.
all the process to run the file is on the thread i just post.
The thing is i already know how to run it via app, but i don't wanna to stop there i wanna to run it via init.d because is a very simple way, but very difficult to find the commands.
Exists any command on init.d that can run a file commands like, run, execute, open or start ?
any of those work? and how to use they?
have any website that have all the command available on init.d?
Click to expand...
Click to collapse
so i resolve this :silly: :laugh: :victory:
after writing I read, and is so lame.
if the file is just like any other executable way not put it in the init.d folder?
and i put, rename to 99jellyservice
and the init.d run it and the apk that need that file to be running before you open it work.
@Ciuffy
Thanks you help me to find a way...
nagalun said:
Hey, you can run a binary from sh by just invoking its path, for example:
Code:
#!/bin/sh
/system/bin/jellyservice
The proccess will spawn with UID 0 (root)
You can change that if you have a good root binary by doing this:
Code:
#!/bin/sh
su system -c '/system/bin/jellyservice'
If you're using supersu I think you have to enable root at boot (Look at the application settings)
Click to expand...
Click to collapse
the 1° option work perfectly!, but i use like this
Code:
#!/system/bin/sh
/system/bin/jellyservice
i think doesn't make a difference.
Thanks man I will use your way, is better that my. :good:
baybutcher27 said:
the 1° option work perfectly!, but i use like this
Code:
#!/system/bin/sh
/system/bin/jellyservice
i think doesn't make a difference.
Thanks man I will use your way, is better that my. :good:
Click to expand...
Click to collapse
Yeah basically the only difference is that Android has no /bin/sh but /system/bin/sh. I though about just putting that there honestly but I couldn't get any of this working on my cyanogenmod so I was trying to figure out why >.>, but I'm probably missing something.
Anyway, glad I could help!