[Q] (bad) installation aborted flashing ROM - AT&T Samsung Galaxy S II SGH-I777

-- Installing: /sdcard/Ultimatum_2.0-rc1.zip
finding update package...
opening update package...
E: can't open /sdcard/Ultimatum_2.0-rc1.zip
(bad)
Instalation aborted.
ok no matter what i try to install it says the same basic thing im running unNamed v2.2.1 and i have tried installing siyah- v2.6.14-att-CWM it installs but my cwm still wont flash anything i have tried using mobile odin and the application for cwm all the same can someone please help i was running ultimatum2.0-rc1 but i backed up the restored to make sure it backed up correctly and it bootlooped my phone so i went all the way back to stock root where i started and after i install UnNamed it wont install a different rom i tried going into mounts and storage and wiping everything separately still no success please help i loved ultimatum

have you tried to redownload the file? You might have come across a bad download.

yep i have ultimatum, cm7, cm9 that i downloaded today and none of them will work i went all the way back to stock root just now and im going to install siyah on that and see if that cwm will work

flammingcamel said:
yep i have ultimatum, cm7, cm9 that i downloaded today and none of them will work i went all the way back to stock root just now and im going to install siyah on that and see if that cwm will work
Click to expand...
Click to collapse
having the files doesnt answer the question. Assuming you downloaded all those, on the same device, same browser. Could be that they're all bad.
use different browser, PC. download again, and try again.
The error is caused by the file your flashing. not CWM.

then ill use my phone and download them thats the only other source i have then ill try flashing cm7 or ultimatum i want to try cm7 and cm9 but this problem is stopping me

my phone wont download .zip files from the site provided so i ahve to retry with my computer

ok i think i resolved the problem. i had usb debugging on and it wasnt going into mtp initialization i was using usb mass storage.
i turned usb debugging off mtp-initialization activated and i transferred ultimatum2.0 rc1 and just installed it i tried cm7 but that didnt work so im back to ultimatum and im going to try to get cm7, and cm9, to work now

Are u trying to install all these from external sd card? If so could it be yer sd card is messed up? Just throwing this out there, hope u can get it resolved.
Sent from my SGH-I777 using Tapatalk 2

I transfer them to my internal SD then once I flash I copy to external in case I have an issue so I can go back and see what I was using thanks for the help though I'm pretty sure its because I used debugging instead of mtp my phone doesnt like debug mode
Sent from my SGH-I777 using xda premium

insall aborted
My phone canvas hd insatall zip after insall abortes plz help

Related

Please help: Booting into cwm...

Ok, i really don't want to odin i want to see if i can fix this without having too.
I'm petty sure this started because i was deleting zips i didnt need such as old ROMS and what not, and i accidentally deleted update.zip which i figured wouldn't matter since i'm already rooted. Well i tried to boot into Clockwork to flash a new rom and it went to android recovery, no biggie, i hit reinstall packages like i always do and it gave me an error. Well i unrooted the phone, re downloaded the update.zip and re rooted it. Then i tried to get into clockwork again, through ROM manager and holding the power button and using that recovery option. As soon as it gets to android recovery it says.
E: can't open /cache/update.zip
(bad)
installation aborted
and this time if i hit reinstall packages it just reinstalls the update.zip over, everytime...I've flashed countless ROMS and all that for months now and i've never had this problem, yes it is clockwork is flashed in rom manager and all that, so i have no idea whats going on.
Please someone.
Sent from my SGH-T959 using XDA App
you deleted something important most likely.
did you install ROM MANAGER and click the first option "flash clockwork"?
if not, try that.
if yes, you MUST odin to get back your system files.
Odin is really easy if you know to use the right files, ive done it once and its been easy since then.
Yes clock work is flashed. I've used odin before also, but only on a bricked phone. Will I have to do this different?
Sent from my SGH-T959 using XDA App
C-4Nati said:
Yes clock work is flashed. I've used odin before also, but only on a bricked phone. Will I have to do this different?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
shouldn't have to just grab a stock ROM and then install that, and BEFORE flashing your other custom ROM, just root and install rom manager, and install clock work.
you know, just in case that it still doesnt work you dont waste your time flashing a rom.
Tell me if it works or doesn't. never faced this problem before.

[Q] NERO v3 Install

So i rooted my phone and installed clockwork rom manager and downloaded nero v3_voodoo.zip and put it on my phone..boot into recovery mode and now i get
--Installing: SDCARD:/Nero_3_voodoo.zip
Finding update package...
Opening update package...
Installing update...
and it stays like this for hours.
Thank You
Which rom/ version are you coming from? Can you boot up normally, not in recovery?
Sent from my SGH-T959 using XDA App
you rebooted into ClockWorkMod Recovery, right?
@Fearless yes.
@jrod from stock and yes i can boot up phone and it works normally it just doesn't flash the new rom
Weird
I want to say that I had this problem @ one point. I think I downloaded a new copy of the ROM. Sometimes the download get corrupted at one point or another. Have you hit boards.teamwhiskey.com? or head to the IRC chat channel? they have a GREAT support community.
I really hope you ran a titanium backup, or else you will loose all apps. I really suggest springing for the paid version, because the restore is only one click.
ok...try re-downloading the ROM again and see if that works
@led Thank You!
@fearless
Downloaded update.zip to root phone did that blah installed clockwork mod app granted superuser always, clicked flash clockwork did that, copied nerov3 onto sd card opened clockwork selected reboot into clockwork recovery once in recovery i selected the zip i wanted to update to which was nerov3voodo.zip clicked yes and it finds and opens it fine just soon as it hits installing it gets hung up for a long time hours so i just pull out the battery and boot back up to normal android with root
Im not 100% positive if this is required or not but when I flash a rom I always start from stock rom, then use samsung mini kies to update to Ji6, then flash the rom of ur choice. I did nero v3 that way too.
Sent from my SGH-T959 using XDA App
I did the same as jrod after a soft brick recently....
mac
is there kies mini for osx?
Ur gonna have to research a lil cuz it wasn't easy to find, at least for me it wasn't lol and im not sure if there is kies for osx. Again im not sure if this routine will fix ur problem I just know it never fails for me. The one time I did flash straight from stock rom, it was a different rom (not nero) and it worked but it seemed real buggy. I say this cuz I flashed the same rom twice, once from stock JFD and once from JI6. Coming from JI6 seemed much smoother
Sent from my SGH-T959 using XDA App
cgol92 said:
Downloaded update.zip to root phone did that blah installed clockwork mod app granted superuser always, clicked flash clockwork did that, copied nerov3 onto sd card
Click to expand...
Click to collapse
Wait a minute, the way I'm reading this Nerov3 was on the SD card and not the root of the phone?
If that's the case both update.zip and nerov3.zip have to be on the 16g root memory of the phone, not the SD card.
I can't install the ROM. I keep getting an error. It says:
E: Failure at line 12:
copy_dir PACKAGE:data DATA:
Installation aborted.
Any ideas why???
bLaZe412 said:
I can't install the ROM. I keep getting an error. It says:
E: Failure at line 12:
copy_dir PACKAGE:data DATA:
Installation aborted.
Any ideas why???
Click to expand...
Click to collapse
Let's back up blaze. We need the who what where when and why before we can help you.
Sent from my SGH-T959 using XDA App
jrod33084 said:
Let's back up blaze. We need the who what where when and why before we can help you.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Haha aite. Ima fill u in. But it might be a difficult to follow, lol:
1) I began by installing the custom ROM "[ROM] Vibrant AOSP ish JK2 1.1 Official FROYO". I had done the back-ups with Clockwork Mod and whatnot. And I also installed the BusyBox.
2) So I successfully installed the custom ROM. However, I read that there was an issue with SD Card's not working??? So I found the .zip file that fixes it and I put it on my SD Card. I then launch into Clockwork Mod, but it freezes on the Vibrant screen. It just boot loops. So I guessed I bricked it.
3) I try numerous times to ODIN it back to stock. It somewhat worked. However, after the Galaxy S screen, it just turns black and nothing loads. Like the interface doesn't show up.
4) I then restore it to a previous state through Recovery. But now, the SD card issue is still present. Like, I can't update/download any apps.
5) I find NERO v3 and I put it on my SD Card. I boot into recovery, and try to install it through there.
6) As I try to install it I get that,
"E: Failure at line 12:
copy_dir PACKAGE:data DATA:
Installation aborted." message.
IF ANYONE CAN PLEASE HELP ME, IT WOULD BE GREAT!!!! Lol.
Hi guys so i planned to upgrade my samsung galaxy to custom rom 2.2. i will appreciate if someone can please tell me that which is the best and stable custom rom for Tmobile Samsung Galaxy S Vibrant (US) Version. i heard that Nero v3 with voodoo lagfix is the best so far. Please correct me if i am wrong. Thanks
bLaZe412 said:
Haha aite. Ima fill u in. But it might be a difficult to follow, lol:
1) I began by installing the custom ROM "[ROM] Vibrant AOSP ish JK2 1.1 Official FROYO". I had done the back-ups with Clockwork Mod and whatnot. And I also installed the BusyBox.
2) So I successfully installed the custom ROM. However, I read that there was an issue with SD Card's not working??? So I found the .zip file that fixes it and I put it on my SD Card. I then launch into Clockwork Mod, but it freezes on the Vibrant screen. It just boot loops. So I guessed I bricked it.
3) I try numerous times to ODIN it back to stock. It somewhat worked. However, after the Galaxy S screen, it just turns black and nothing loads. Like the interface doesn't show up.
4) I then restore it to a previous state through Recovery. But now, the SD card issue is still present. Like, I can't update/download any apps.
5) I find NERO v3 and I put it on my SD Card. I boot into recovery, and try to install it through there.
6) As I try to install it I get that,
"E: Failure at line 12:
copy_dir PACKAGE:data DATA:
Installation aborted." message.
IF ANYONE CAN PLEASE HELP ME, IT WOULD BE GREAT!!!! Lol.
Click to expand...
Click to collapse
Ok ur right that was alot to follow lol. Ur gonna have to start all over and odin back to stock. Make sure you have both the right ....512.pit file that goes next to the PIT selection in odin , obviously. And the ....jfd.tar file that goes in the pda selection. Check the repartition box also. Let odin and the phone do its thing. It usually will sit on the galaxy s screen for a couple minutes. Did you have any lag fixes installed? If so I hope you disabled them first
Sent from my SGH-T959 using XDA App
adiprince1 said:
Hi guys so i planned to upgrade my samsung galaxy to custom rom 2.2. i will appreciate if someone can please tell me that which is the best and stable custom rom for Tmobile Samsung Galaxy S Vibrant (US) Version. i heard that Nero v3 with voodoo lagfix is the best so far. Please correct me if i am wrong. Thanks
Click to expand...
Click to collapse
Depends what ur looking for. The newest and reputable ones are nero v3 and axura 2.2.5.7. Nero is a lil more stable but not by much. Axura is a lil more snappier/faster but also not by much. Both are themed specifically to the makers choice so its ur call which to go with. Without customizing anything I like neros theme better but after I flashed blackfroyo to axura I loved it. Also it seems that nero is more customizable but that could be cuz axura just came out a few days ago. So its ur call. Try em both out. I did. Give one a couple days then the other so you can really wee the positives and negatives. DONT forget to disable voodoo if you try multiple roms
Sent from my SGH-T959 using XDA App
jrod33084 said:
Ok ur right that was alot to follow lol. Ur gonna have to start all over and odin back to stock. Make sure you have both the right ....512.pit file that goes next to the PIT selection in odin , obviously. And the ....jfd.tar file that goes in the pda selection. Check the repartition box also. Let odin and the phone do its thing. It usually will sit on the galaxy s screen for a couple minutes. Did you have any lag fixes installed? If so I hope you disabled them first
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Yeah, I have the *True Stock* files for ODIN. I can get ODIN to do its job, but it doesn't load anything after the Galaxy S screen. Hmmm....perhaps it is the lag switch. How do I disable it?
bLaZe412 said:
Yeah, I have the *True Stock* files for ODIN. I can get ODIN to do its job, but it doesn't load anything after the Galaxy S screen. Hmmm....perhaps it is the lag switch. How do I disable it?
Click to expand...
Click to collapse
You have to disable the lag fix before you start flashing. Which lag fix do you have?
Sent from my SGH-T959 using XDA App

[Q] Can anyone help me?

I was running axura 2.2.5.7 and decided to give darky's 8.0 a try. I performed a back up then flashed the new rom (Darky's). Now I have NO SERVICE (no call text or data) and when i went to flash back to axura, my backup was no longer there. I also cannot get my computer to recognize my phone to flash to another rom. I'm currently downloading kies. ANY SUGGESTIONS???
JebbyD said:
I was running axura 2.2.5.7 and decided to give darky's 8.0 a try. I performed a back up then flashed the new rom (Darky's). Now I have NO SERVICE (no call text or data) and when i went to flash back to axura, my backup was no longer there. I also cannot get my computer to recognize my phone to flash to another rom. I'm currently downloading kies. ANY SUGGESTIONS???
Click to expand...
Click to collapse
Did you try a simple reboot of the phone. That happen to me once after flashing a rom then I rebooted and it was fine after. And did you disable voodoo before flashing
Sent from my SGH-T959 using XDA App
Yes, i tried a reboot. And yes i disabled the lag fix. I cannot figure out how to fix it as I'm a bit of a noob to most of this
JebbyD said:
Yes, i tried a reboot. And yes i disabled the lag fix. I cannot figure out how to fix it as I'm a bit of a noob to most of this
Click to expand...
Click to collapse
If its only a Internet data/service issue then I would download and flash a new modem. That should fix it
Sent from my SGH-T959 using XDA App
this may be a dumb question, but how do i do that if my computer wont recognize my phones sd card?
Flame on!!
Have you tried download mode?
Search the forum on how and what if you couldn't get into download mode. Then odin back to stock. Also, Darky is for I9000, NOT Vibrant. Please read before flashing anything. And if you want to mess around, read up about the worst scenario and the solutions FIRST.
JebbyD said:
this may be a dumb question, but how do i do that if my computer wont recognize my phones sd card?
Click to expand...
Click to collapse
Make sure ur phone is in mass storage mode or it wont recognize it and make sure you have the samsung usb drivers installed. I read in another thread that darkys rom wont work on our vibrants. If you can get the computer recognize ur sd card then transfer axura to it and then flash again. Remember to disables lag fixes.
Sent from my SGH-T959 using XDA App
You can also remove the sdcard, put it in the adapter and plug it into a reader that's attached to your pc...
From Nero's Dragon...
Possibly try getting your device into download mode and start over from true stock via Odin and make sure to repartition.
Thanks so much for you help guys! Now running nero v3
cvibe88 said:
Possibly try getting your device into download mode and start over from true stock via Odin and make sure to repartition.
Click to expand...
Click to collapse
NO. Do NOT repartition, this will wipe your SD card...
bobbbb said:
NO. Do NOT repartition, this will wipe your SD card...
Click to expand...
Click to collapse
I always do this, And It has never formatted my SD card. Besides, backing up as a rule of thumb beforehand, you cant go wrong.

[Q] Desperate for help. Bootloop after odin from Whiskey nero w/voodoo

I have tmobile's vibrant t959 and I had Nero w/voodoo on there and all I did was odin back to stock because I wanted to get ICS on the phone. well I knew I had a problem before I had dropped my phone and the service cut out it doesnt do anything since then but bootloop unless I have a ROM on there then it works PERFECTLY fine, So I assume it's an internal issue? Well I had used odin to go back to stock and the terrible bootloop started again. I tried to install a new rom after i installed the update.zip file but it WILL not go into clockwork recovery. The other day when I put Nero on there I didn't need rom manager or ANYTHING it was completely stock and all I did was do update.zip through install packages and then it brought me right to the Clockwork screen. Now after I hit install packages it just reboots to the loading screen and starts up the phone..then bootloops. I'm not too sure what to do I've installed every odin 1.7 1.3 everything every single JDF and pit file I can possibly find nothing works. I can't get into clockwork even though I have superuser and all that can anyone PLEASE give me some kind of advice? I just can't figure out how i got it to work the other day.. but I know it will work. Also I did put some kind of....clockwork thing through odin? brought me to a red clockwork but when I go to install the rom it doesn't so my SD Card just my internal phone one and I even tried putting the rom on there but it doesnt show up...Mind you I can't keep the phone on for very long before it restarts...maybe if i'm lucky i can put osmething on the SD card...I also have been using my other phone to put things onthe SD card then put the SD card back into my vibrant..please someone help I want to let my boyfriend use the phone.. I'm starting to feel like I should have just left Nero on there and never tried to put ICS on there...
You try the nobrick PDA tar first?
Sent from my SGH-T959 using xda premium
Remove your SD and power, when u flash
Sent from my SGH-T959 using xda premium
Also did you try to check reparatition , when you flashed??
Sent from my SGH-T959 using xda premium
I literally tried everything you know what I just got it to work by odin. PIt and tar and then another tar.md5 file in PHONE and it workeD! I'm not sure how or why but i'm really even more confused now LOL
okay so now when i try to put roms on it just says installation aborted.... so...i dont know what else to do.... Maybe it was how i did the odin thing? but i do odin any other way and i get bootloops?
Md5.tar?
Sent from my SGH-T959 using xda premium
512.pit and ur supposed be using
T959UVJFD.tar
Sent from my SGH-T959 using xda premium
You have to root it after you used Odin. You can't flash custom roms without that and custom recovery. Follow the sticky guides.
Sent from samsung Vibrant
I am completely and fully aware that I have to root after i use odin......LOL i've been rooting and using roms for the last two years I just am currently having this problem...yeah it was a md5 tar and the pit and then the jfd tar. i dont know where i found it but now i cant apply roms. I dont know if i odin back with just the pit and jfd tar then i get a bootloop....and i know what i'm suppose to be using. i do understand how to do it that's not the problem at all so no I don't need to follow the stickys.. it's the fact that when I do it RIGHT i get the bootloop.
BeautifulTrauma said:
I am completely and fully aware that I have to root after i use odin......LOL i've been rooting and using roms for the last two years I just am currently having this problem...yeah it was a md5 tar and the pit and then the jfd tar. i dont know where i found it but now i cant apply roms. I dont know if i odin back with just the pit and jfd tar then i get a bootloop....and i know what i'm suppose to be using. i do understand how to do it that's not the problem at all so no I don't need to follow the stickys.. it's the fact that when I do it RIGHT i get the bootloop.
Click to expand...
Click to collapse
Try this, and please do it even if you already have.
Delete any update.zip you have on your sdcard and put this one on your internal sdcard. http://db.tt/5FWb4wT8
Odin jfd w/ repartition clicked (must be jfd, not ji4/5/6 or anything else).
No, boot into recovery, select "real install packages". And then the phone will reboot back to recovery. Select it again.
Now you *should* be able to install the rom you want, assuming you have a vibrant 3g (t959) and not a galaxy s 4g (t959v) or a t959d.
Also, what's the error number you are given when the flash fails?
Sent from my Sensation using Tapatalk 2
Alright thank you i'm trying all this now and I'll let you know what happens. I'm just a little nervous because whenever i odin back to stock without doing it the other way I get the bootloop from hell. hopefully it doesn't happen.... The error that appears is error in sd/romname installation aborted. that's all it says.
Alright well I did odin, the same way I always do it. This time without the tar.md5 file just the regular JFD. This is such a pain in the butt with no service connection...even through wifi I cannot use the market so anything i need i have to download the APK until I get this rom working. -.- OH BAM! ur update.zip worked! butttt roms still are aborted and i'm back into a bootloop.
wait a minute...can I not go directly to ICS or any other rom if i'm coming from stock?...I barely remember not being able to do that....okay so i tried putting cm7 on there and same thing... installing:sdcard:update-cm-7ect.zip finding update package opening update package installing update checking state of BMLMTD assert failed:run_program("/tmp/updater.sh") == 0 e?:error in sdcard/update-cm-7.1.01-vibrant-sig-ned. (1).zip status 7 installation aborted.......wtf D: i am about to give up... i dont know how I had nero w/voodoo on here... i know i odin back to stock then through clockwork installed the zip.. i tried to get nero back but the website is gone and no other downloads for nero are anywhere...

Cwm problem

What have I done wrong. I rooted a friends note as I did mine. Followed Canadian rooting guide. Went to install new cm10.1 and got a error. Blah blah blah error "bad". Redownloaded 4 times withe the same result.
What's my deal?
Sent from my SGH-I717R using xda app-developers app
thutchinson85 said:
What have I done wrong. I rooted a friends note as I did mine. Followed Canadian rooting guide. Went to install new cm10.1 and got a error. Blah blah blah error "bad". Redownloaded 4 times withe the same result.
What's my deal?
Sent from my SGH-I717R using xda app-developers app
Click to expand...
Click to collapse
Perhaps give TWRP2 a try as the recovery. I've had more success with it over CWM with newer ROMs and never went back to CWM.
When reporting an issue... it's a fantastic idea to describe your problem as clearly as you can.
"Error blah blah blah Bad ... blah blah blah" doesn't really help anyone to help you.
Cwm gave your an error, now I can only assume it was a status 7 error.
That means your recovery is older than the type of script used in the zip to flash the rom.
To fix this, do as the poster above said and get the latest twrp, or find an updated version of cwm.
I personally use twrp so I'm not 100% sure where to find the latest cwm if it's not here on xda.
Now... if this isn't the error you're getting. Do yourself a favor and just flash that rom and
POST EVERY SINGLE THING CWM SAYS.
LETTER FOR LETTER.
Hey Folks, The error I am seeing is on both TWRP and CWM. E:Can't open /sdcard/cm-10.1-20130303-NIGHTLY-quincyatt.zip(Bad) Installation Aborted.
studacris said:
When reporting an issue... it's a fantastic idea to describe your problem as clearly as you can.
"Error blah blah blah Bad ... blah blah blah" doesn't really help anyone to help you.
Cwm gave your an error, now I can only assume it was a status 7 error.
That means your recovery is older than the type of script used in the zip to flash the rom.
To fix this, do as the poster above said and get the latest twrp, or find an updated version of cwm.
I personally use twrp so I'm not 100% sure where to find the latest cwm if it's not here on xda.
Now... if this isn't the error you're getting. Do yourself a favor and just flash that rom and
POST EVERY SINGLE THING CWM SAYS.
LETTER FOR LETTER.
Click to expand...
Click to collapse
Your file is incomplete or corrupted. Redownload it.
I have redownloaded at least 4 times on both computer and transfered it over and on the phone via browser
Sent from my SGH-I717R using xda app-developers app
Download it from here: http://get.cm/get/jenkins/21559/cm-10.1-20130303-NIGHTLY-quincyatt.zip
And transfer to your phone/sd card via USB cable or SD card adapter on PC.
You did install CWM properly and aren't still using stock recovery?
Problem has been solved. I used the USSD code for reset, went to stock and re did everything and a way I go. Everything works no. What I did before is beyond me. Thanks alot to everyone who has offered their help! Greatly appreciated...
Agoattamer said:
Download it from here: http://get.cm/get/jenkins/21559/cm-10.1-20130303-NIGHTLY-quincyatt.zip
And transfer to your phone/sd card via USB cable or SD card adapter on PC.
You did install CWM properly and aren't still using stock recovery?
Click to expand...
Click to collapse
Help in 10.1 CM install
thutchinson85 said:
Problem has been solved. I used the USSD code for reset, went to stock and re did everything and a way I go. Everything works no. What I did before is beyond me. Thanks alot to everyone who has offered their help! Greatly appreciated...
Click to expand...
Click to collapse
Hi,
what did you mean you went back to stock? and what is USSD?
here are my issues:
Hi, I really love this CM 10.1 ROM I am running the 10.1 201330209-unofficfial-quinctatt. Everything works fine except when I reboot the phone it loads the boost screen starts up and then freeze once done with the boot screen.
SO I need to restart the phone a few times to be able to get it back on.
---also I have 5.8.4.3 CWM in stalled and try to use ROM manager when it works even got the paid version but booting into CWM works best.
I am unable to install the latest cm-10.1-20130306-EXPERIMENTAL-quincyatt-M2.zip. I get a.
--- "zip status 7 aborted message.
Also when I try to install cm-10.1-20130304-EXPERIMENTAL-quincyatt-M2.zip. it installs fine,
But when I try to place calls.
---there is no sound on the speaker or external or internal.
I would like to stay current on the nightlies but are these just some of the glitches that come with it?
---Also I tried installing the GB-modem because my GPS wont lock, I think that is when the phone quit allowing me to make calls(no sound on speakers) which help the gps a little I guess? not really.
I am now back on the i717UCLF6 baseband.
If it wasnt for my nandroid back up I would be totally LOST!
I mostly use liquid Mod it works best, love it! but would like to be on 10.1 CM. Still no gps lock though. I REALLY NEED GPS, i drive a lot for work.
I know there is a lot going on here buy ANY! help is very much appreciated!
Install the latest TWRP recovery ...IMHO And although I might get flames thrown for this, use recovery to flash directly, and not through the rom manager app.
It has caused users some grief...
Regarding your sound and boot errors, boot into recovery and wipe all caches ....cache/dalvik cache .....then reboot too test. It sounds as if your flash may be dirty somehow. And if restoring apps to your new roms by using titanium backup or other apps, restore only the APK and not the associated data stored by those apps.
CM nightly builds are buggy yes, and will have errors not found in stable builds. But having used the same build you are referring too only a day ago, I can tell you that my sound was okay with the M2 rom.
And I commend you on the creation of a proper nandroid backup. It seems all too often we find users in real trouble with no backup in their pocket to save them.
Call me anal retentive, but I flash bleeding edge tweaks every day, and I keep backups compatible to all 3 recoveries we have for the note just for this type of emergency.
The latest TWRP and a cache cleaning should help you with both the current build, and future builds to come.
Good luck, and happy flashing ...g
Sent from my SAMSUNG-SGH-I717 using XDA Premium HD app

Categories

Resources