[Q] Please help.. Wifi issue. - Galaxy S II Q&A, Help & Troubleshooting

Hey guys, posted a thread the other day. But didn't get much of an answer. But now am back with a different question. Anyway, long story short. My girlfriend is a goose and swapped a perfectly good iPhone (wait what, how can an iphone be good - i know, i know) for a samsung galaxy s2. It kept turning off and wifi doesnt work.
I done an update to 4.0.3 using odin and that stopped the constant turning off, but wifi is still not working.
Now what I would like to know it, if i change the modem firmware in it, will it fix it ? Could I just try different firmwares until I works ? Would downgrading to say 2.2 possibly fix the issue ? (It was originally 2.3.5)
Please help, if you need information, just post and ill reply )

joshystevo said:
Hey guys, posted a thread the other day. But didn't get much of an answer. But now am back with a different question. Anyway, long story short. My girlfriend is a goose and swapped a perfectly good iPhone (wait what, how can an iphone be good - i know, i know) for a samsung galaxy s2. It kept turning off and wifi doesnt work.
I done an update to 4.0.3 using odin and that stopped the constant turning off, but wifi is still not working.
Now what I would like to know it, if i change the modem firmware in it, will it fix it ? Could I just try different firmwares until I works ? Would downgrading to say 2.2 possibly fix the issue ? (It was originally 2.3.5)
Please help, if you need information, just post and ill reply )
Click to expand...
Click to collapse
the modem or baseband is nowhere related to ur wifi issue ma8 for that u have 2 change the kernel and see u can try SIYAH, Thoravukk or Fluxi kernel and see it might resolve ur wifi issue

Sun90 said:
the modem or baseband is nowhere related to ur wifi issue ma8 for that u have 2 change the kernel and see u can try SIYAH, Thoravukk or Fluxi kernel and see it might resolve ur wifi issue
Click to expand...
Click to collapse
Hey, thanks for a quick reply. Oh I see, (I am very new to this )
Could you please link me to where I can get these kernals ? Thanks !

Sun90 said:
the modem or baseband is nowhere related to ur wifi issue ma8 for that u have 2 change the kernel and see u can try SIYAH, Thoravukk or Fluxi kernel and see it might resolve ur wifi issue
Click to expand...
Click to collapse
Im assuming you've tested the router with other devices to eliminate that? It sounds as though the warranty is already void so it could be a good excuse to root & install cwm5 if you haven't already. Like was already mentioned wifi is kernel related so i would recommend installing a recently released aokp (preferred) based rom with whatever kernel is provided. If you're still having the problem try installing different kernels from there on in. Remember to flash a kernel cleaning script before flashing the new kernel. If the problem persists it could be hardware related. Good luck bud !

gr8ednz said:
Im assuming you've tested the router with other devices to eliminate that? It sounds as though the warranty is already void so it could be a good excuse to root & install cwm5 if you haven't already. Like was already mentioned wifi is kernel related so i would recommend installing a recently released aokp (preferred) based rom with whatever kernel is provided. If you're still having the problem try installing different kernels from there on in. Remember to flash a kernel cleaning script before flashing the new kernel. If the problem persists it could be hardware related. Good luck bud !
Click to expand...
Click to collapse
Yep, the wifi just doesnt turn on at all. switch to on, and it switches off straight away. Is CWM5 (clock work mode ) If so I have that. Could you please link me to a aokp based rom. I'm sorry for being a hassel, just very new and hoping to get this issue cleared up asap, because it is a great phone. Also confused as to flashing a kernal cleaning script ??

joshystevo said:
Yep, the wifi just doesnt turn on at all. switch to on, and it switches off straight away. Is CWM5 (clock work mode ) If so I have that. Could you please link me to a aokp based rom. I'm sorry for being a hassel, just very new and hoping to get this issue cleared up asap, because it is a great phone. Also confused as to flashing a kernal cleaning script ??
Click to expand...
Click to collapse
for siyah kernel link below
downld the zip file under ver 3.3.1 and flash the same thro CWM after putting the file into ur internal sdcard
http://www.gokhanmoral.com/
for thoravukk link below
http://forum.xda-developers.com/showthread.php?t=1574672

Sun90 said:
for siyah kernel link below
downld the zip file under ver 3.3.1 and flash the same thro CWM after putting the file into ur internal sdcard
http://www.gokhanmoral.com/
for thoravukk link below
http://forum.xda-developers.com/showthread.php?t=1574672
Click to expand...
Click to collapse
Thanks. Do I have to do anything to my firmware, or just straight up put the kernel on ?

joshystevo said:
Yep, the wifi just doesnt turn on at all. switch to on, and it switches off straight away. Is CWM5 (clock work mode ) If so I have that. Could you please link me to a aokp based rom. I'm sorry for being a hassel, just very new and hoping to get this issue cleared up asap, because it is a great phone. Also confused as to flashing a kernal cleaning script ??
Click to expand...
Click to collapse
No hassle m8 only problem is im on my touchpad so can't send you links. From xda enter i9100 (device) go android development then look for resurrection remix 2.2 Download file place it in downloads "internal" (easy to find) then boot into clockwork recovery. Firstly make sure you backup current rom! After that's done follow these instructions carefully.
Wipe data/Factory reset
Wipe cache
(from advanced) Wipe dalvik cache/battery stats
(from mounts/storage) format cache/data/system
Go to 'install zip from sd card'
Go to 'choose zip from internal'
Install 'resurrection remix'
Reboot then setup Google accounts etc.... Then reboot again & wait 5 mins.
As for kernel cleaning script try this 1st then see how you go.. I'm off to bed m8 good luck with everything!

Related

[Q] No multi-dpi support by NEAK/Cherrypicker kernels

Hello Guys !!!
I have been using serendipity and ultimatum rom with siyah kernel 3.2.4 for quite some time .. I'm a sucker for changing DPI to lower like 215-220 as I don't like big icons covering all screen space..
Yesterday I read somewhere that NEAK has better battery life as compared to siyah, so I tried to flash that.. however to my surprise I found that it just got hanged as sammy boot screen and didn't even boot.
Then just to test, I also tried cherripicker kernel and faced same issue with that too. then finally I reflashed my siyah and everything was back to normal and booted as it should.
My question is, has anyone noticed this issue before where only siyah supports multi-dpi and no-other sammy kernel ? Forgive me if its something that is understated somewhere and I missed it, but I found it kinda surprising as it should be something supported with all kernels...
xxr0x0rxx said:
Hello Guys !!!
I have been using serendipity and ultimatum rom with siyah kernel 3.2.4 for quite some time .. I'm a sucker for changing DPI to lower like 215-220 as I don't like big icons covering all screen space..
Yesterday I read somewhere that NEAK has better battery life as compared to siyah, so I tried to flash that.. however to my surprise I found that it just got hanged as sammy boot screen and didn't even boot.
Then just to test, I also tried cherripicker kernel and faced same issue with that too. then finally I reflashed my siyah and everything was back to normal and booted as it should.
My question is, has anyone noticed this issue before where only siyah supports multi-dpi and no-other sammy kernel ? Forgive me if its something that is understated somewhere and I missed it, but I found it kinda surprising as it should be something supported with all kernels...
Click to expand...
Click to collapse
I kind of doubt that it's the multi-dpi issue and it's more of a problem with ExTweaks settings. Before you flash a different kernel, I would clear all your ExTweak settings (under CWM > Kernel Specific) then wipe Dalvik and Cache, and then flash.
tocirahl said:
I kind of doubt that it's the multi-dpi issue and it's more of a problem with ExTweaks settings. Before you flash a different kernel, I would clear all your ExTweak settings (under CWM > Kernel Specific) then wipe Dalvik and Cache, and then flash.
Click to expand...
Click to collapse
I followed ur instruction word to word and still no go... so I guess I am right ..
Thanks for ur input though ..
xxr0x0rxx said:
I followed ur instruction word to word and still no go... so I guess I am right ..
Thanks for ur input though ..
Click to expand...
Click to collapse
Your flashing something wrong, Kernels have no support of DPI.
Its the ROM, and the applications that are affected by DPI change

[HELP] i9100G Touch Screen Problem after Flash Stock JB France-XEF

After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
sinsai said:
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
Click to expand...
Click to collapse
Did u update via kies or odin?
If u used a firmware and flashed via odin, please try another firmware.
Over this try to do a factory reset after u flashed the FW.
CHEERS
sinsai said:
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screkeen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
Click to expand...
Click to collapse
Well your phone is i9100g... You sure you flashed ROM of i9100g and not of galaxy s2 i9100...coz many people make that mistake..
Post this in the i9100g...idk how much we can help you with this..
Anyways, try factory resetting the phone...if no luck take it to Samsung customer care...it can be a hardware problem. ..
And ya, which ROM are you flashing? The official stock ROM or custom ROM?
Custom ROM do have many bugs and vary from phone to phone. .. Try going to stick for one and check if problem is still there. .
Press thanx if I helped...
Hannibal226 said:
Did u update via kies or odin?
If u used a firmware and flashed via odin, please try another firmware.
Over this try to do a factory reset after u flashed the FW.
CHEERS
Click to expand...
Click to collapse
update via odin...trying both 3.07 and 1.85
i use firmware on this post http://forum.xda-developers.com/showthread.php?t=1679636
and done factory reset every time before and after done flashing...
after done several times flashing, im still facing touchscreen problem...
the weardest is the problem fix when i plugin charger...
umair241995 said:
Well your phone is i9100g... You sure you flashed ROM of i9100g and not of galaxy s2 i9100...coz many people make that mistake..
Post this in the i9100g...idk how much we can help you with this..
Anyways, try factory resetting the phone...if no luck take it to Samsung customer care...it can be a hardware problem. ..
And ya, which ROM are you flashing? The official stock ROM or custom ROM?
Custom ROM do have many bugs and vary from phone to phone. .. Try going to stick for one and check if problem is still there. .
Press thanx if I helped...
Click to expand...
Click to collapse
cannot post on i9100g dev becoz my post still under 10...
im sure i flash the right rom from http://forum.xda-developers.com/showthread.php?t=1679636
ya..done factory reset but still got the problem...
like i said before..the touchscreen work fine if i plugin charger or connect usb to pc/laptop...
i dont think it becoz hardware problem since it work perfect on stock GB, stock ICS, aokp, CM and 4-5 other custom ROM...
can it becoz of battery? i use 1650mah...i have try 1500mah and touch screen getting more worst...
i still cant find any solution for my phone..
already try many method like
- using re-partion on odin with pit file
- format data, system, cache, emmc
- wipe data/factory reset/dalvic cache
- flash using odin/cwm
- root/unroot
after done all above..touch screen laggy and still make dash line on drawing...
after my last post...i have try most rom on Galaxy S II I9100G Android Development Section and my touchscreen on all rom are working perfect except official stock JB or custom rom base on stock JB...
forgot to mention that the day on my 1st time installing stock JB i accidently flash Galaxy tab 2 p3100 firmware and got softbrick
but successfuly unbrick then done flashing stock JB...dunno if this incident can damage my phone...
or is other way to make FULL FORMAT internal SD? to make sure the file that i accidently flash completely remove...
sinsai said:
i still cant find any solution for my phone..
already try many method like
- using re-partion on odin with pit file
- format data, system, cache, emmc
- wipe data/factory reset/dalvic cache
- flash using odin/cwm
- root/unroot
after done all above..touch screen laggy and still make dash line on drawing...
after my last post...i have try most rom on Galaxy S II I9100G Android Development Section and my touchscreen on all rom are working perfect except official stock JB or custom rom base on stock JB...
forgot to mention that the day on my 1st time installing stock JB i accidently flash Galaxy tab 2 p3100 firmware and got softbrick
but successfuly unbrick then done flashing stock JB...dunno if this incident can damage my phone...
or is other way to make FULL FORMAT internal SD? to make sure the file that i accidently flash completely remove...
Click to expand...
Click to collapse
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Touch not responding properly
gastonw said:
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Click to expand...
Click to collapse
I have this problem to.
Any news about this?
---------- Post added at 01:53 AM ---------- Previous post was at 01:43 AM ----------
gastonw said:
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Click to expand...
Click to collapse
I have this problem to.
Any news about this?
I dunno, I don't have an I9100G.
Sent from the little guy
you could try Blazing Kernel, it can be flashed via stock recovery. http://forum.xda-developers.com/showthread.php?t=2113545.
Or you could also flash original GB and upgrade to JB either through OTA or KIES.
acse1 said:
you could try Blazing Kernel, it can be flashed via stock recovery. http://forum.xda-developers.com/showthread.php?t=2113545.
Or you could also flash original GB and upgrade to JB either through OTA or KIES.
Click to expand...
Click to collapse
I have tried that two methods, Flashing GB (everything works great), flashing ICS (everything works great too), and then JB trough OTA and the touch screen doesnt work properly. I have tried the last Blazing Kernel too without success.
Thanks for the help.
Any ideas?
Try stock kernel. Customs aren't ready yet.
Sent from the little guy
gastonw said:
Try stock kernel. Customs aren't ready yet.
Sent from the little guy
Click to expand...
Click to collapse
The stock Kernel file is already on the Stock JB Odin file?
Like these : http://forum.xda-developers.com/showthread.php?t=1679636
Indeed it is.
Sent from the little guy
gastonw said:
Indeed it is.
Sent from the little guy
Click to expand...
Click to collapse
Dosent work either. :/
We have the same problem dude, touch screen not working properly after stock jb (xef) flash but working flawlessly when phone is plugged. I can't have a custom rom above 4.2.1, else I have the problem. Now I'm on CM10.1 4.2.1 and can't leave it because of this, the official rom I want is the official.
Did you got the screen of your phone replaced ? Because mine was and I was wondering if it was that.
samstacle said:
We have the same problem dude, touch screen not working properly after stock jb (xef) flash but working flawlessly when phone is plugged. I can't have a custom rom above 4.2.1, else I have the problem. Now I'm on CM10.1 4.2.1 and can't leave it because of this, the official rom I want is the official.
Did you got the screen of your phone replaced ? Because mine was and I was wondering if it was that.
Click to expand...
Click to collapse
Not sure if it was replaced because I bought it used on ebay.
But are you using CM10.1 4.2.1 without touch screen problems? Can you tell me the date of the release so I can try to flash my phone with that ROM?
Thanks
Yeah without touch screen problem. It's 20130213 nightly
Sent from my GT-I9100G using xda app-developers app
samstacle said:
Yeah without touch screen problem. It's 20130213 nightly
Sent from my GT-I9100G using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply.
I just find the 20130214. Is that one? I will try it.

[Q] Help please, S2 cant load roms as usual

Hi there,
Can you please help me, I am a NOOB and I been looking and trying to fix my phone for a week and I cant work it out, therefore I come here seeking your help, I would very much value ideas or solutions you could provide.
I will be as brief as possible.
When I try to flash a new Rom, my phone gets stuck on the boot screen, there are only two roms that load, one freezes, the others roms wont boot.
All started like this:
I originally had RR JB V3.1.3 AOKP 4.2.1 I9100
Then changed to
AllianceROM_I9100_XWLSS_V8, look good but thought of trying the aokp i9100 jb-mr1 milestone-1, when trying to swap I made the mistake of doing a factory reset to find out that I could not access the roms on my sdcard.
so I then installed (I9100_CODE_I9100XXLP2_CL57619_REV02_user_low_ship.tar) it all worked as it went to stock. I rooted the phone again, tried installing the AllianceRom, but it didnt want to load, tried the Aokp again it did work, but then once the screen turns off it wont respond...
tried super nexus, did not want to work. tried updating CMW, it doesnt want to... Tried Jellybam, did not load...
So I tried and reloaded RR JB V 3.1.3 as I already have and it works, it is the only rom that works successfully, But if I try to go on to CMW, it doesnt work anymore, and it seems that once I try to use CMW it makes the rom unstable... So it seems that I can only use one Rom at the moment. Clearly I must of done something wrong at some point but I dont know what. I dont even know what to search for to fix it.
I tried different tools to see if they would help and no luck, such as, GS2ROMNuke, Romreset and Romwipe, Darkside cache and superwipe.
I hope someone can help me out in working out what I did wrong or what is happening.
Thank you so much for your time and help.
Bump, Any help would be very much appreciated.
Thnaks
Bumping inside 24 hrs is not permitted.
MistahBungle said:
Bumping inside 24 hrs is not permitted.
Click to expand...
Click to collapse
Thanks for letting me know... Will keep that in mind next time.
Try kernel nuke then flash another kernel say siyah as its got cwm. Should be good then mate. Then install alliance rom. Also when you installed and booted for first time on these roms did you try wipe cache and dalv cache fix Permission ??
sent from my I9100 Alliance v8
andrewwright said:
Try kernel nuke then flash another kernel say siyah as its got cwm. Should be good then mate. Then install alliance rom. Also when you installed and booted for first time on these roms did you try wipe cache and dalv cache fix Permission ??
sent from my I9100 Alliance v8
Click to expand...
Click to collapse
Thanks for the tip... I did try however I dont have access to cwm anymore once I install RR.
The only way I can get CWM to work again, is installing speedmod-kernel-s2-k2-21- through Odin but then the rom doesnt work anymore.
I tried the kernel nuke, I have tried installing siyah kernel with RR, but no luck it doesnt go into cmw. keep getting a message Kernel Panic...
anymore suggestions?
Could I have done something on the mounts? I dont know, but I cant think of what is going on.
Could it be that my phone has emmc brick?
I came across two apps
Got Brickbug?
Verdict
Danger! This eMMC chip is known to have the brick bug!
and
eMMC check
Brick Bug?
Yes. Insane chip....
Could someone please give me an indication what this means for me? Thanks
Yes, it's sticked in the general forum.
Sent from the little guy
gastonw said:
Yes, it's sticked in the general forum.
Sent from the little guy
Click to expand...
Click to collapse
Thanks mate!!!
One final question, why is it that the RR Rom is the only one to work rather well? (CMW does not work once the rom is intalled)
Thanks heaps!
Where did you hear that?
Sent from the little guy
gastonw said:
Where did you hear that?
Sent from the little guy
Click to expand...
Click to collapse
RR is runing rather well,I have tried it... I have currently stock installed and it is working just fine....
Any ideas? Thanks
swifteagle said:
RR is runing rather well,I have tried it... I have currently stock installed and it is working just fine....
Any ideas? Thanks
Click to expand...
Click to collapse
"Serenity now, insanity later"
gastonw said:
"Serenity now, insanity later"
Click to expand...
Click to collapse
hahahaha, so is my s2's chip insane?
Thanks
swifteagle said:
hahahaha, so is my s2's chip insane?
Thanks
Click to expand...
Click to collapse
Yes, but you don't need to worry (as long as you're not on 4.0.4), and that's that.
gastonw said:
Yes, but you don't need to worry (as long as you're not on 4.0.4), and that's that.
Click to expand...
Click to collapse
Thanks...Fantastic!!!

[Q] Galaxy S2 Wifi Issue

Hello!
I'm sorry if this is a repeated thread.
I'm on Jelly Bean stock firmware I9100XWLSK (4.1.2) (Indian version) rooted. Everything is fine except that I am not able to turn on wifi since last week (Its becomes dull green and then gets grey; Refer Screenshot).
There was a similar problem when I was on ICS (when wifi toggle switch used to hang), but it was solved by one of the several tweaks suggested for the problem..e.g. delete connection and put the phone in airplane mode etc. etc.
But this time none of these worked. The wifi would just won't turn on. S2 without wifi is of no use to me.
I've tried every thing; Flashed stock GB 2.3.6 & JB 4.1.2 I9100XWLST, Did factory reset, wiped cache data, etc etc.
I'm tired now, this problem is being faced by many others so I request you all masters of andriod to take the matter seriously and come out with a solution please.
Further more when i use USSD codes such as *#*#526#*#* or *232339# WLAN Test code, nothing happens, these codes do not work on my 4.1.2 S2.
Many Thanx & Regards.
PS: Find the attached screenshots.
Try a custom kernel (pick any one you want). WiFi drivers are in the kernel, so therein probably lies your problem.
khani245 said:
Hello!
I'm sorry if this is a repeated thread.
I'm on Jelly Bean stock firmware I9100XWLSK (4.1.2) (Indian version) rooted. Everything is fine except that I am not able to turn on wifi since last week (Its becomes dull green and then gets grey; Refer Screenshot).
There was a similar problem when I was on ICS (when wifi toggle switch used to hang), but it was solved by one of the several tweaks suggested for the problem..e.g. delete connection and put the phone in airplane mode etc. etc.
But this time none of these worked. The wifi would just won't turn on. S2 without wifi is of no use to me.
I've tried every thing; Flashed stock GB 2.3.6 & JB 4.1.2 I9100XWLST, Did factory reset, wiped cache data, etc etc.
I'm tired now, this problem is being faced by many others so I request you all masters of andriod to take the matter seriously and come out with a solution please
Many Thanx & Regards.
PS: Find the attached screenshots.
Click to expand...
Click to collapse
1) Please do not use Bold letter's like this in ur post unless to highlight words.
2) Have u checked for the wifi issue after updating to JB and before rooting ur phone.
3) since its repeatedly occuring for u (had it on ICS and now on JB- rooted) have u ever thought it might be a hardware related.
4) have u tried a Diff Kernel like PHILZ/DORIMANX/SIYAH to see if the wifi issue resolved
MistahBungle said:
Try a custom kernel (pick any one you want). WiFi drivers are in the kernel, so therein probably lies your problem.
Click to expand...
Click to collapse
Can you plz suggest me a kernel for rooted I9100XWLSK (4.1.2) (Indian version). I've no idea about selecting kernels.
Thanks for the reply.
Regards.
Sun90 said:
1) Please do not use Bold letter's like this in ur post unless to highlight words.
2) Have u checked for the wifi issue after updating to JB and before rooting ur phone.
3) since its repeatedly occuring for u (had it on ICS and now on JB- rooted) have u ever thought it might be a hardware related.
4) have u tried a Diff Kernel like PHILZ/DORIMANX/SIYAH to see if the wifi issue resolved
Click to expand...
Click to collapse
1) Apologies for the bold letters.
2) I was on stock 4.1.2 and to resolve it I rooted it but no sucess, i further went on flashing GB 2.3.6 but still wifi wont turn on. Currently i'm on rooted I9100XWLSK (4.1.2) (Indian version).
3) I can only wish its not a hardware, when this problem occurred in ICS many people told its an hardware issue but it wasn't. After JB update it went on a working state and now after a long time I'm facing this issue.
4) No, please suggest.
Regards.
khani245 said:
1) Apologies for the bold letters.
2) I was on stock 4.1.2 and to resolve it I rooted it but no sucess, i further went on flashing GB 2.3.6 but still wifi wont turn on. Currently i'm on rooted I9100XWLSK (4.1.2) (Indian version).
3) I can only wish its not a hardware, when this problem occurred in ICS many people told its an hardware issue but it wasn't. After JB update it went on a working state and now after a long time I'm facing this issue.
4) No, please suggest.
Regards.
Click to expand...
Click to collapse
Link below for 'PHILZ' kernel
http://forum.xda-developers.com/showthread.php?t=1877270
Sun90 said:
Link below for 'PHILZ' kernel
http://forum.xda-developers.com/showthread.php?t=1877270
Click to expand...
Click to collapse
Just Confirming.
You want me to flash 5.04.2013 - PhilZ-cwm6 v4.92.8 with CWM 6.0.3.0 based recovery at http://www.mediafire.com/download/rfc9mylcgjzlvee/PhilZ-cwm6-XWLSK-ODD-4.92.8-signed.zip for I9100XWLSK already rooted.?
Regards.
Want him to shake it for you when you're done as well ? He's only told you what to do twice, how many more times do you need ? (Please don't bore us with the 'But I just want to be sure' line. It's not rocket surgery).
MistahBungle said:
Want him to shake it for you when you're done as well ? He's only told you what to do twice, how many more times do you need ? (Please don't bore us with the 'But I just want to be sure' line. It's not rocket surgery).
Click to expand...
Click to collapse
ohk calm down, there's nothing to get offended. Its just that I have less knowledge then you all. I'm a newbie after all. I'll flash it and get back.
Regards.
MistahBungle said:
Want him to shake it for you when you're done as well ? He's only told you what to do twice, how many more times do you need ? (Please don't bore us with the 'But I just want to be sure' line. It's not rocket surgery).
Click to expand...
Click to collapse
:good:
Sun90 said:
Link below for 'PHILZ' kernel
http://forum.xda-developers.com/showthread.php?t=1877270
Click to expand...
Click to collapse
I flashed the Philz Kernel but wifi still wouldn't turn on. Please Advise
khani245 said:
I flashed the Philz Kernel but wifi still wouldn't turn on. Please Advise
Click to expand...
Click to collapse
Hve u tried 'turning On' the wifi under Settings> Wifi for now or is it just the Toogle on the status bar drop down ur trying
Sun90 said:
Hve u tried 'turning On' the wifi under Settings> Wifi for now are is it just the Toogle on the status bar drop down ur trying
Click to expand...
Click to collapse
I've been trying to do that too but to no avail. The wifi button stays grey for 2-3 seconds and then gets off by itself. Refer Screenshot.
Please help.
Prior to having this wifi issue I was on this same Philz kernel.
I was having an instinct that it wont solve the problem. Can you suggest me to flash some other kernels?
Regards.
khani245 said:
Prior to having this wifi issue I was on this same Philz kernel.
I was having an instinct that it wont solve the problem. Can you suggest me to flash some other kernels?
Click to expand...
Click to collapse
Just a shot in the dark, but you could try latest Apolo 4.7, since it has new WiFi drivers from S4 -- see if that helps...
khani245 said:
Prior to having this wifi issue I was on this same Philz kernel.
I was having an instinct that it wont solve the problem. Can you suggest me to flash some other kernels?
Regards.
Click to expand...
Click to collapse
Ok, then u can try the siyah kernel from the link below
http://d-h.st/1kT
or even the 'Apolo' as mentioned by kt-Froggy and see
kt-Froggy said:
Just a shot in the dark, but you could try latest Apolo 4.7, since it has new WiFi drivers from S4 -- see if that helps...
Click to expand...
Click to collapse
Flashed the apolo kernel but no sucess... the stupid wifi doesnt turn on
Sun90 said:
Ok, then u can try the siyah kernel from the link below
http://d-h.st/1kT
or even the 'Apolo' as mentioned by kt-Froggy and see
Click to expand...
Click to collapse
Will try Siyah Kernel and let you know... This wifi issue ate all of my office time today... signing off... I'll get back to update you if it worked... Thank you very much
Sun90 said:
Ok, then u can try the siyah kernel from the link below
http://d-h.st/1kT
or even the 'Apolo' as mentioned by kt-Froggy and see
Click to expand...
Click to collapse
Bro I tried the siyah kernel but the wifi still doesnt turn on...
Please advise.
I have the same problem as khani245 only I had originally NeatRom XWLSS on my phone and worked well no problems until I went o/s for a couple of weeks and I changed sims and I couldn't get wifi so I had a Samsung guy look at it and to fix he put GB 2.36 and it worked sort of but when I got home and changed back to my recent NeatRom I couldn't even get the green ticks in the wifi settings. I have gon back to GB2.3.4 cleared everything installed stock rom and now get the green wifi ticks but wifi is continually searching for any connection but can't even find my modem/router 4` away. There is a problem and it seems to be a software problem.

[Q] My Galaxy S2 GT-I9100 BRICKED, Help me!

I Get a notification about the update to version 4.4 BETA 1 of Paranoid Android rom, after downloaded, i flash it via CWM normaly, then flash gapps, but when the phone reboot it stucked at the Galaxy S2 boot logo, and it can boot into recovery, only download mode, but when i open odin to flash CWM but odin can't access the phone and i can't flash, i tried to install usb driver but not success, so what can i do now, please help!
Sorry for my bad English
1) Your English is better than a lot of native English speakers I know.
2) Hopper8's 'Odin troubleshooting' thread stickied in General has all the info you need to get a successful Odin flash. Find the thread, try as many of the troubleshooting steps as many times as you need to in order to get a successful flash.
However, don't try one or two things from the thread, come back here & say 'But I tried some of the stuff in the thread & it didn't work. That thread covers this issue from every possible angle, and it's often persistence that fixes these. There's no easy fix in this situation because we're not there looking over your shoulder seeing what you're doing/not doing, and there's nothing which isn't in the thread that can be suggested in this situation.
So...I've (and Hopper has) given you the tools to get your phone fixed, up to you to fix it now.
@nguyenducanh did you manage to fix this?
I have been speaking with the dev (ayysir) of ParanoidAndroid, 4.4beta1 for S2 had a bug with the kernel. The ROM wouldn't boot at all with the stock kernel, but would with any compatible custom kernel (Dorimanx, Gustavo, Apolo -correct versions of these).
The dev has uploaded a new build now which fixes the problem, so if you've managed to recover your phone the new build is safe to use (tested by me)
Hopper8 said:
@nguyenducanh did you manage to fix this?
I have been speaking with the dev (ayysir) of ParanoidAndroid, 4.4beta1 for S2 had a bug with the kernel. The ROM wouldn't boot at all with the stock kernel, but would with any compatible custom kernel (Dorimanx, Gustavo, Apolo -correct versions of these).
The dev has uploaded a new build now which fixes the problem, so if you've managed to recover your phone the new build is safe to use (tested by me)
Click to expand...
Click to collapse
Ok, tks u, i fixed my phone via odin, and i'm using c-rom v6.6, i will try newest pa now because i'm a big fan of pa
nguyenducanh said:
Ok, tks u, i fixed my phone via odin, and i'm using c-rom v6.6, i will try newest pa now because i'm a big fan of pa
Click to expand...
Click to collapse
Good job, I like to hear that someone recovered their phone using that guide and odin :good: make sure you re-download the ROM, you need the build on 0605, not 0604. 0604 is busted, but 0605 is good
Hopper8 said:
Good job, I like to hear that someone recovered their phone using that guide and odin :good: make sure you re-download the ROM, you need the build on 0605, not 0604. 0604 is busted, but 0605 is good
Click to expand...
Click to collapse
Ok, using 0605 now, and missing see through option
nguyenducanh said:
Ok, using 0605 now, and missing see through option
Click to expand...
Click to collapse
That's because of the new theme engine... I saw something on google+ about that. I think it's planned to be re-implemented but may take a while due to complexity..
Hopper8 said:
That's because of the new theme engine... I saw something on google+ about that. I think it's planned to be re-implemented but may take a while due to complexity..
Click to expand...
Click to collapse
I hope "see through" will come back in the next update

Categories

Resources