could anyone help me fix my phone? my phone is already rooted, i use rom manager and then i load the .zip file which makes reading sd card faster from root toolbox and i click on the file then everything freeze even then i turn off and i turn it back on, now it freeze forever, so could anybody help me? please im begging you
Dont worry my friend
If u cannot get back into system to delete the file you may try a hard reset to bring ur phone back into life
It will whype all ur data but ur phone probably should work again
you may try the whipe data/cash in recovery mode
if this doesnt work try the following:
http://www.htc.com/help/in/howto_iframe.aspx?id=167228&type=1&p_id=439
If this doenst work let me know and i will see if i can help u
but dont worry anyway ur phone´s not bricked or something
u still have the chance to reflash the firmware
i tried going into factory setting already but my phone still wont stop freeze, is it because i use a custom rom when i havent install clockwork mod? also when the htc logo come when turning on passes i get a black screenand i cant do anything at all except reboot
Custom ROM without clockworkmod? The first thing ROM manager would have done is to prompt you to install it. How did you install a custom ROM without a recovery? What happens when you go into recovery from bootloader? (Press and hold volume down while turning on the phone, then use volume keys to navigate to 'recovery' and press power to select)
Sent from my Desire HD using xda premium
i already did that, but nothing happens except some picture of a phone downloading something and than fail. i was just clicking on the .zip file then everything freeze then i had to reboot but thats when the htc logo pass then a black screen come then everything freeze
Since you said you're rooted, I presume you've already unlocked your bootloader via www.htcdev.com.
Have you tried out these?
[TOOL] HTC One V All-In-One Toolkit V1.1 [6-11-2012] [PERM ROOT] [Noob-Proof]
[Recovery]CWM v5 Touch Recovery for HTC One V[Build 6]
Both of these threads are from the One V Development forum. You can flash CWM Touch recovery via either of them. Once you have recovery then you can wipe all your partitions, install a new custom ROM and do anything. Don't panic about the state of your phone and rush through. Follow the instructions step by step. These kind of problems are common and fixable. Good luck.
In the worst case that none of the above work out for you, you can always return to stock unrooted HTC firmware by connecting your phone to computer and running an official HTC RUU (ROM Update Utility). They are .exe files so you'll need Windows. Here's the link.
Primo (HTC One V) Shipped ROM Collection
Find and download the right RUU for your phone depending on your region. For example, I'm in India, so my RUU would be the Asia one. For India and the whole of Asia. Similarly there are ones for Europe, China & an exclusive one for phones on Sprint networks worldwide. WWE = World Wide Edition. There are so many Europe ones because they're all different version numbers so if you're confused, the latest is RUU_PRIMO_U_ICS_40A_HTC_Europe_2.08.401.2 so run that.
Tip -> You would have got much more help and much quicker too if you had posted this in the HTC One V General or Q&A forum (see link below). Also don't forget to hit thanks for the posters of those threads if they helped you.
HTC One V forum sections
today my phone got worst, it wont charge at all
Related
Hi,
I've had a HTC Hero since they came out, and for most of the time I've had it, it has been rooted and running various roms (Cyanogen, lately).
A few weeks ago I somehow got dust under the screen, sent it to HTC who repaired it and sent it back, with their own 'install' which has:
Firmware: 2.1-update1
Software Number: 3.32.405.2
Now, I'm not really a fan of sense and would like to go back to using Cyanogen mod, however, I can't work out how to root it (well, to get it to a stage where I can flash it with custom roms).
All of the tutorials and step-by-step guides on here and ones I've found on Google don't seem to work any more (I believe they do on earlier versions of HTC's build), I appear to have got as far as 'rooting' it but when turning on with power and home held down I get the red triangle/exclamation mark displayed. I'm clearly not doing something right.
I don't want all the answers spelled out for me, but if someone could give me a hint as to where to look or a clue as to what I could be doing wrong I'd be grateful.
Any help will be appreciated
have you tried the androot method
http://theunlockr.com/down/UniversalAndroot-1.6.2-beta5.apk
http://www.megaupload.com/?d=FJA3L8YZ
make sure that unknown sources is checked
after you have download it and put it onto your phone download astro file manager and then find the androot apk and install then open it then press root
after doing that download to the android market and search rom manager and flash the recovery image that way
I had, yes - actually it was the first method I tried.
The first time I ran it, it said 'woot you're root' (or something similar) but on rebooting and holding home and power, I got the red triangle/exclamation mark symbol.
I have since reset my phone to factory settings so I reinstalled it now, again it appeared to root successfully, but on rebooting and holding home/power it just says on the white HTC logo screen and doesn't appear to progress.
Would the easiest solution to be to attempt to revert to a previous 'official' HTC build and then try Androot again? One of these maybe?
hmmm did you try the goldcard method? was the only method to gain root access on my Google G2 Touch (german HTC Hero by t-mobile)
due to most providers lock the possibility of rooting, this maybe could help you...
look for "Goldcard tool" @ google... sry don't know where i got my tutorial from the days i rooted but i remember it wasn't hard to find(although i was a complete rooting noob these days), so should be no problem to you
greets, Summoner
edit: was thinking... the exclamation mark looks like a missing custom recovery, maybe you need to flash one.. i'm using AmonRA 1.0.7.1 (build number correct? don't know) which can be found around here on the forum.
I was a Hero user some months before. I tried official 2.1 update just to root it again. I used this guide: http://www.villainrom.co.uk/forum/showthread.php?3941-Rooting-my-new-HTC-Hero&highlight=root+hero
I used amon ra recovery then. I also ended up getting red triangle. This was solved when i formatted my sdcard and only put the recovery image.
I had the same symptoms, could only get amon ra installed via rom manager alternative install, it would then allow me to reboot to recovery once, but every other time I would get the red triangle.
I believe the problem was I had two recovery.img files, stupidly I had copied a recovering flash image onto the sdcard, then renamed it recovery.img, not realising its name was then recovery.img.img.
(its been 20 years since I've administered unix systems..and it shows).
perhaps check the recovery img you have, and where it is, and re-try the command line flash, it might not be a rooting issue, hth.
LM<FAO
sorry for laughing but this is a thing that happened to me when i was a beginer
REMEMBER THIS rooting doesnt mean u have a rec image remember use androot to give u super user then use rom manager to flash clockworksmod recovery image then reboot in recovery
jave PHUN
wishes the best for all your heros
Thank you all kindly for your assistance; after hours of trying, tears, tantrums and almost throwing my phone out of the window I'm up and running on Cyanogen Mod again
Thanks!
no problem remember to press the thanks button to who ever helped you
hmm I've done fallowing:
1. androot
2. rom manager - flash clockworksmod recovery image
3. reboot in recovery
4. backup
5. wiped cache/dalvik
6. installed Elelinux-7.0.0-RC2-Hero-v1.6 (2011-03-23)
and now the android logo keeps looping (more then 5 min)
/cry
I wanted to change the kernel from my P500 to solve the lag problem and get better overall performance.
I rooted the phone using gingerbreak 1.20
after that i installed from the market Rom manager restarted the phone, and i backup the phone from there.
After that I got stuck with my kernel replacement and I gave up and I wanted to reset the phone to default state. I didn't do anything to my phone.
I unrooted the phone and did the factory data reset.
Now when I reboot the phone and press power+volume down+home I still get the Clockworkmod Recovery boot menu. In an untouched P500 what do you get when pressing that combination? Is there any way to make my phone 100% factory state ?
sorry for my bad english
u should even delete the recovery.....(TO get rid of it)
the recovery is on the sd card, right? i formated the sd card... so there is nothing related to rom manager...
u must try flashing the default rom from the devlopment forum.(KDZ Updater)
blah
if i wait for gingerbread update will the update solve this?
The Recovery is not on the sdcard.
Go here:
http://forum.xda-developers.com/showthread.php?t=1065197
and download the file "Original_Recovery_thunderg.zip" (or something to that effect) and flash it through cwm. This will restore the recovery as it was originally.
The zip is unsigned so you will have to toggle signature verification in cwm recovery.
@mihir he doen't want to get his recovery back(in other word he wants to remove it).
@soberspine http://forum.xda-developers.com/showthread.php?t=944881 check dis thread and install the original rom...
@devil the original recovery zip in the link will restore the condition of the recovery to factory condition, i.e remove it.
this android reminds me of installing windows 95
the new unpdate to gingerbread will come out next month, so the update to 2.3 will get rid of that boot menu and other things that where changed when I installed Rom manager? in other words will the phone go to factory state before rooting/unrooting and stuff.
Yeah most probably the recovery will be cleared if and when you update to gb. But if you want to clear it now use the zip, it works.
Sent from my LG Optimus One P500 using XDA App
I don't think you'll be able to update to GB from a custom ROM or rooted phone. Even if the option comes up, it is recommended to go back to stock state (without recovery and root) or else it might cause problems.
i didn't installed any custom rom. the only thing I did was to root my phone using gingerbreak and then installed rom manager.
the only thing that changed to my phone is that now it has that boot menu clockworkmod.
now i unrooted my phone.
So it is not safe to make official update even if the only change is that i have on my phone clockworkmode?
Step by step picture guide to completely restore to open-box state using KDZ updater
did this for thousands of times and if you are doubted in any steps feel free to ask me
btw for your question, an un-touched optimus one pressing the recovery combination will result in
a stable image of an android jumped out of a white-rectangular box
a bar at the bottom loading
but that's it, nothing more no matter how long you wait
Also for your updating question:
LG WONT recognize your phone with their official updating tool only when you are ROOTED (so of course when you perform any other steps after rooting, it wont either... e.g. installing custom recovery, flash roms etc)
BUT if you go back to the original thing with KDZ, LG will update anything for you -tested by myself!
thank you for all the clarifications and the tutorial.
I will wait now for the new android 2.3 release and ill do the whole thing then.
It is possible after rooting and installing clockworkmod the phone to work slower?
It feels like the phone is responding slower or maybe is just me imagining things .
hehe. nothing like that.
soberspine said:
thank you for all the clarifications and the tutorial.
I will wait now for the new android 2.3 release and ill do the whole thing then.
It is possible after rooting and installing clockworkmod the phone to work slower?
It feels like the phone is responding slower or maybe is just me imagining things .
Click to expand...
Click to collapse
r291 said:
hehe. nothing like that.
Click to expand...
Click to collapse
ur welcome
Right, it wont be slower dont worry
No CWM for me? Primo not going into CWM recovery any way I try
So I unlocked the prime after realizing root was not the only thing I needed to start flashing ROMs.. TRUE
I rooted using Sparky's method, so easy too. I also tried to root with viper mod one time when apparently Sparkys wasnt working again after I did something like un-root for fun. But Vipermod failed due to drivers that weren't installed and still haven't, reason: could not figure out how or what part was the driver to be installed nothing i clicked on (in XP) worked to download the drivers. however XP does recognize the prime after Windows Media Player update 11 . it said flash complete or successful . I've flashed CWM from the app itself but the only real function I have from it is fixing permissions...
So should someone like me who just reads downloads and flashes (like a madman flasher) to just wait for a newer version that is fully functional so I dont mess things up and need to learn hours of great knowledge to unbrick the TFP/???
I've read that its not really working all the way is this true???
and another ?Q: I want my web to be speedy like Speedy Gonzales so what do I delete from it and what is the best web browser for speed surfing... this prime was crawling around untill I deleted some things that were uselessly running it seems to have worked a bit but not enough a delete list would be rad. Also one other question was it my order of operations which led to a faulty CWM? though I ve reflashed it several times to no better result.. And also if you are still reading (and thank you very much if you are) I dont know how to manually give CWM a go or how to manually get into recovery--- volume up and down plus power seems to soft brick the Prime untill I hold down the power button for a while untill it vibrates for a second then release and push it again to turn it on....and I held power plus volume down but such small print showed up on the upper left corner that i couldn't really know what to do... I also saw the symbols one was a USB symbol,Q: What is this function? WHat would happen should I push the USB symbol ???... ALso can I get updates from Asus after the unlocker app has been used EDIT: DON"T need them however I will find out how to turn these FOTAs off . And Q: does anybody know how to keep the Logitech keyboard connected it times out so when you go back for it it can take a good thirty seconds recovering from its nap... any fix? thanks alot I cant wait to start flashing better ROMs than stock, mine is fairly buggy
___________________________________
Mytouch 3g Cyanogen Mod
Galaxy S 4G Lightning Zapped! Valhalla Black
Galaxy S2 T989 Darkside Kernel ROM:Juggernaut 5.0
AND A VIRGIN PRIME TO FLASH BANG
___________________________________
It is hard to tell if you tried to go into CWM correctly...here is how:
With the Prime OFF, hold the vol down button and the power button until the white lettering appears (you seemed to do that). Then, you have a few seconds to hit the vol up button. (If you wait too long, it won't work.) You should go into recovery at that point -- CWM version 5.8.2.0.
I did the first version of the recovery install manually, like you. But, honestlly, just download ROM Manager from the Market and let it install the latest Transformer Prime CWM for you. If it cannot do it, you have a problem.
If ROM Manager cannot do it, you are probably not actually unlocked. Do you remember giving your rights away to your warranty? If not, you did not unlock and you need to run the unlock .apk. Most of the guys with CWM problems did not unlock their devices correctly.
(P.S.) Personally, if my Prime had been too buggy, I would not have unlocked it. I would have RMA'd it!
Thanks
tedr108 said:
It is hard to tell if you tried to go into CWM correctly...here is how:
With the Prime OFF, hold the vol down button and the power button until the white lettering appears (you seemed to do that). Then, you have a few seconds to hit the vol up button. (If you wait too long, it won't work.) You should go into recovery at that point -- CWM version 5.8.2.0.
I did the first version of the recovery install manually, like you. But, honestlly, just download ROM Manager from the Market and let it install the latest Transformer Prime CWM for you. If it cannot do it, you have a problem.
If ROM Manager cannot do it, you are probably not actually unlocked. Do you remember giving your rights away to your warranty? If not, you did not unlock and you need to run the unlock .apk. Most of the guys with CWM problems did not unlock their devices correctly.
(P.S.) Personally, if my Prime had been too buggy, I would not have unlocked it. I would have RMA'd it!
Click to expand...
Click to collapse
Im giving it a go now thanks for the CWM instructions that part is solved however I asked like ten questions though and am thankful for your answers
I just did a backup in CWM thanks a lot I' d hit thank you again but its gone THANKS!!!
*If I helped hit thanks*
___________________________________
Mytouch 3g Cyanogen Mod
Galaxy S 4G Lightning Zapped! Valhalla Black
Galaxy S2 T989 Darkside Kernel ROM:Darkside
AND A VIRGIN PRIME TO FLASH BANG
___________________________________
I had a similar problem. Bought my Prime from Amazon in the USA and it came preloaded with Honeycomb - imagine that!!! Anyways I struggled as a result to flash a recovery...I seemed to get root quite easily using NachoRoot and ViperMod methods but flashing a recovery and trying to boot into recovery had me ending up with an exclamation marked Android on boot! 1 day of persistent trying and searching high and low, and am glad to report I finally have a rooted Prime with working recovery (just about to flash Touch Recovery now and then a custom ROM...) running ICS 4.0.3...
My steps:
Trying to flash a custom recovery on HoneyComb really was the show-stopper here, using NachoRoot, Memphi*, nor ViperMod...it just wouldn't work using ADB, fastboot etc
So after 1 day of trying and almost dreading having to send the device back to the US for a swap out, I decided to focus instead on upgrading my firmware to 9.x.x.15 (just below the .21 version which has no root tool at the moment!)
So downloaded a pre-rooted ICS 9.x.x.15 custom ROM from somewhere (google is your friend here) and then followed this tutorial here: http://forum.xda-developers.com/showthread.php?t=1492887
Once I was on ICS, it was then easy to use ViperMod (excellent tool!) to quickly get rooted and successfully flash CWM
Great work to the devs of the different tools I have come across and used.
great
fyi, you only need root to flash cwm FROM rom manager, otherwise you can use fastboot to flash cwm manually.
Sent from my TF201
I was running infectedROM Sense 3.0, and I had successfully set up several other ROMs via boot manager previously. Today I just installed Playground ICS to an SD slot through boot manager and I backed up my phone ROMs boot img and clicked reboot to playground. The phone rebooted and showed the splash screen. After about 10 seconds on the splash screen, it shut off and won't turn back on. No charge light, regular boot and vol down + power both don't work. All I need to do is get to recovery, then I have to flash the update.zip for my phone ROM in the bootmanager folder. Can anyone help me get into recovery or the bootloader?
edit: I installed playground by installing the zip, and I didn't install any other mods/kernels on top of playground. On the other ROMs I have installed in boot manager, I installed them via a nandroid backup.
If you look through the last few pages of the Playground ICS thread, it is an issue and can be fixed, but its not that easy unless you know what you are doing. I hope you have a linux box.
Look at these posts for help.
http://forum.xda-developers.com/showpost.php?p=23963768&postcount=257
http://forum.xda-developers.com/showpost.php?p=23960522&postcount=250
http://forum.xda-developers.com/showpost.php?p=23968691&postcount=274
netwokz said:
If you look through the last few pages of the Playground ICS thread, it is an issue and can be fixed, but its not that easy unless you know what you are doing. I hope you have a linux box.
Look at these posts for help.
http://forum.xda-developers.com/showpost.php?p=23963768&postcount=257
http://forum.xda-developers.com/showpost.php?p=23960522&postcount=250
http://forum.xda-developers.com/showpost.php?p=23968691&postcount=274
Click to expand...
Click to collapse
looks like I've got my work cut out for me. Glad I have a dual boot with Ubuntu...anyway thanks for your help.
no problem. You might want to post anything further in that thread, you will probably get more help over there. But either way let us know if you succeed.
Sent from my Ice Creamed 3D
w0rdOo said:
I was running infectedROM Sense 3.0, and I had successfully set up several other ROMs via boot manager previously. Today I just installed Playground ICS to an SD slot through boot manager and I backed up my phone ROMs boot img and clicked reboot to playground. The phone rebooted and showed the splash screen. After about 10 seconds on the splash screen, it shut off and won't turn back on. No charge light, regular boot and vol down + power both don't work. All I need to do is get to recovery, then I have to flash the update.zip for my phone ROM in the bootmanager folder. Can anyone help me get into recovery or the bootloader?
edit: I installed playground by installing the zip, and I didn't install any other mods/kernels on top of playground. On the other ROMs I have installed in boot manager, I installed them via a nandroid backup.
Click to expand...
Click to collapse
Do you know how many times I tried to brick this thing when I was downgrading? I almost gave up! And you do it by accident? Lucky you
Edit... Sorry bout your luck, hope all goes well.
no luck so far, I opened windows sda13 thru sdk13 and none of them found the device. i guess i'll reboot and try sda13-sdz13 lol.
Just took my phone to a sprint store, after about 30 min the repair guy came back and handed me the phone. He told me he doesn't have the tools necessary to fix it so I need to come back tomorrow, but he said I'm going to have to lose all my data in order to get the phone working again using his method. I hope the emmc_recover works tonight, or tomorrow I'll probably have hboot 1.5 and s-on
Is it possible that emmc_recover won't work because I'm on the engineering hboot?
I just realized I should probably post in the downgrade hboot thread, so I'm doing that now.
EDIT: fixed my phone flawlessly, the only reason it didn't work the first time is I forgot to pull the battery before plugging it in. Thanks again for your guys' help!
Post-trial of ICS Playground
w0rd,
I had the same problem with my EVO after playing around with this as well. For all others that may have this problem here was my solution...
Symptoms:
After trying to re-flash from ICS Playground to another ROM my phone was stuck at the HTC splash screen and would not do anything. I restarted into recovery and was unsuccessful; even tried to recover to my original files and after that it passed the splash screen and then the screen went black.
Resolution:
Finally used fastboot into recovery and flashed another ROM and it worked. Morale of the story use fastboot from your computer to get into recovery and Flash your ROM.
Hope this helps...
____________________
Device: EVO 3D unlocked via HTCdev
TeamWin Recovery v1.1.1
HBOOT 1.5 (ehh)
MilkRunny 3vo CDMA v.1.13
rugbykj said:
w0rd,
I had the same problem with my EVO after playing around with this as well. For all others that may have this problem here was my solution...
Symptoms:
After trying to re-flash from ICS Playground to another ROM my phone was stuck at the HTC splash screen and would not do anything. I restarted into recovery and was unsuccessful; even tried to recover to my original files and after that it passed the splash screen and then the screen went black.
Resolution:
Finally used fastboot into recovery and flashed another ROM and it worked. Morale of the story use fastboot from your computer to get into recovery and Flash your ROM.
Hope this helps...
____________________
Device: EVO 3D unlocked via HTCdev
TeamWin Recovery v1.1.1
HBOOT 1.5 (ehh)
MilkRunny 3vo CDMA v.1.13
Click to expand...
Click to collapse
I appreciate the reply. However, the problem I had was with one specific release of playground which bricked my phone once installed. I couldn't boot into recovery or the bootloader; the screen wouldn't turn on no matter what. Fastboot won't work from this state. The only way to unbrick at that point without going to a sprint store is to use the emmc_recover tool that's part of the hboot 1.5 downgrade process (in case this happens to you or anyone else, you have to follow step 3 ONLY in the downgrade process in order to recover from bricking your phone)
w0rdOo said:
I appreciate the reply. However, the problem I had was with one specific release of playground which bricked my phone once installed. I couldn't boot into recovery or the bootloader; the screen wouldn't turn on no matter what. Fastboot won't work from this state. The only way to unbrick at that point without going to a sprint store is to use the emmc_recover tool that's part of the hboot 1.5 downgrade process (in case this happens to you or anyone else, you have to follow step 3 ONLY in the downgrade process in order to recover from bricking your phone)
Click to expand...
Click to collapse
Just curious. How do you know it was a specific release, and did it happen to anyone else? Do you know the cause of it?
wikdNoob said:
Just curious. How do you know it was a specific release, and did it happen to anyone else? Do you know the cause of it?
Click to expand...
Click to collapse
The links netwokz provided above showed me that it was a specific release. TwistedUmbrella was experimenting (and I downloaded the experimental ROM, not one of the more "stable" releases) to try to get usb mount to pc to work, and something was wrong in the build I downloaded because it wiped the emmc so I couldn't boot to the phone, recovery, or bootloader. Basically, the ROM bricked my phone in the same way that you're supposed to brick your phone when downgrading from hboot 1.5. Luckily, Twistedumbrella is a great dev who helped people who bricked their devices out. In case you're worried about running into the same issue I did, the build that bricked me is no longer online, as he's updated the experimental and regular download links.
I know it was a specific release because I wasn't the only person who reported this problem. I think it was the 1 am experimental build from 03/22. Anyway, I'm now downloading twistedumbrella's latest experimental. Back to the ROM flashing game
With boot manger they say you must be running the same os as your phone rom or you could brick it. If your phone rom is GB I would recommended running GB roms instead of ICS roms
emarlatt said:
With boot manger they say you must be running the same os as your phone rom or you could brick it. If your phone rom is GB I would recommended running GB roms instead of ICS roms
Click to expand...
Click to collapse
I haven't had any sort of issue from running an ICS ROM in boot manager while running a sense 3.0/3.5 ROM as my default OS. This reported brick was caused by one specific release of playground ICS that would have bricked my phone in the exact same way if I just installed it through my recovery instead of through boot manager. Boot manager wasn't at fault here.
This thread was resolved several days ago. Can I close this thread or something? I've never tried to before so idk how to go about doing that...Well in the meantime, I guess I can just hope nobody else decides not to read page one before posting...
PLEASE.
I have found lots of threads on this topic and nothing is working for me.
-I unlocked bootloader.
-Flashed Android revolution ROM
>WiFi stopped working..A device doesn't even show up to try and select just a blank menu (should be several routers showing)
-I have since tried using CyogenMod menu to do factory wipe/cache wipe then installed a new rom
- I have tried installing JmzStockATTOneDeodex, and RageOneV.1.1.0 after doing factory wipe/cache wipe
- I then found "RUU_Puccini_LTE_Rogers_WWE_1.26.631.4_Radio_1.05.550I.09v2_30.68.550I.12_release_219377_signed"
but this file doesnt seem to open at all it is a exe... and now .......I now am starting to lose my mind
PLEASEEEE HELP!
I am on Rogers LTE Network, HTC One, Canada.
I would really like to be able to flash the RageOne and have wifi work, PLEASE!!!!
millarrjm said:
please.
I have found lots of threads on this topic and nothing is working for me.
-i unlocked bootloader.
-flashed android revolution rom
>wifi stopped working..a device doesn't even show up to try and select just a blank menu (should be several routers showing)
-i have since tried using cyogenmod menu to do factory wipe/cache wipe then installed a new rom
- i have tried installing jmzstockattonedeodex, and rageonev.1.1.0 after doing factory wipe/cache wipe
- i then found "ruu_puccini_lte_rogers_wwe_1.26.631.4_radio_1.05.550i.09v2_30.68.550i.12_release_219377_signed"
but this file doesnt seem to open at all it is a exe... And now .......i now am starting to lose my mind
pleaseeee help!
I am on rogers lte network, htc one, canada.
I would really like to be able to flash the rageone and have wifi work, please!!!!
Click to expand...
Click to collapse
****. Now my ****ing internet wont work either **** me.
Please i need help asap!!! Someone pleaseeeeeeee
i cant believe i even tried this **** with my new device
i just want to go back to factory rogers setting for canada when my wifi and internet would work **** **** **** ****f uck :"(
Calm down. You found the solution yourself. That exe file is the ruu. Relock the bootloader put the phone in fast boot. Then run the program on your computer
gunnyman said:
Calm down. You found the solution yourself. That exe file is the ruu. Relock the bootloader put the phone in fast boot. Then run the program on your computer
Click to expand...
Click to collapse
So it didn't work..Also it said I have version 1.29.631.4 and this is 1.26.631.4 .. wouldn't I want the newer one? I never used a rom exe like this.. only flashed different rom zips from here.. the 3 available.
Also I am not posistive I MIGHT have used a "flash kernal" on one of the rom zips the android revolution one the very first time I installed it...
using "One_M7_All-In-One_Kit_v1.0" that is available here on at&t htc one part of forum. Then I kept reading and flashed it using recovery mode... and the rom worked well everything was fine except wifi... then today I flashed the others like I explained before trying to fix wifi and now the internet won't work as well. but the rest of the phone functions as it should and my carrier network works fine i can txt / call .
I follow your steps and it said this when I ran the exe..
ERROR[132]:SIGNATURE ERROR
The ROM Update Utility cannot update your android phone.
Please get the correct ROM update utility and try again.
--- Sorry this is kind of long, I just want to explain best for anyone reading this including yourself to understand what idiot things I did to bring myself to this conclusion, I am new to the community and a android noob
I have the same problem too,my HTC One wifi keep saying turning on and then error after root, i tried using the wifi tether app but its not working, any one can help please?
I've re-read your OP and you don't have the correct RUU for your device. You have an M7 not a Puccini, anyway like the At&T model a RUU for rogers doesn't exist yet.
As for fixing your wifi, your best hope is to restore your nandroid backup (I hope you made one) or find a Nandroid for your device. I know there's a thread over on the International forums with Nandroids in it, maybe find it there or make a request there.